Warning: /boot/System.map-2.2.20 does not match kernel data.
helo everyone. i just installed debian stable unto an old pentium pro, and
all seemed to go well. however, when i do a ps aux, i get the following
warning:
{module_list} {module_list_R__ver_module_list}
Warning: /boot/System.map-2.2.20 does not match kernel data.
what'd i do wrong? is this a problem and is there some way to correct it?
thanks in advance,
daryl
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
rlogind problem
folks, i have a vanilla 2.2 debian system that i originally did not install the berkeley rsh-servers on. i subsequently have the requirement to run xclients from this host displaying to a win98 box using hummingbird exceed. becuase exceed does not support ssh i found myself needing to install the rsh-server software package. after doing this however i get the following error message when trying to rlogin: rlogind syntax error all dependencies (as listed in the package info page) are installed. any ideas, clues, or help will be much appreciated. tia, daryl
debian scsi installation support?
folks, i would like to install debian on a dell poweredge 4300 with a PERC/2 SC raid scsi controller from AMI. as far as i know there is no support during a debian installation for this card. there is support for this from red hat for their installation, however i would prefer to use debian. there is a driver available from the manufacturer for this card, however it is not appear to be on the debian installation media. is there support planned for this card during installation in the future, or is there someway currently to bootstrap to a point where i can install the driver. your help is appreciated. if this is not the right list to post this question to, i apologize and would appreciate a pointer to the correct forum to address this issue. tia, daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
Re: what happened to courtney?
hi remco, thanks for your reply. i appreciate the information. //daryl Remco Blaakmeer wrote: > On Fri, 30 Apr 1999, Daryl Williams wrote: > > > folks, > > > > i am building a new firewall machine and in the process > > discovered that courteny is no longer available as a debian > > package? can someone verify this, or did i miss something? > > also am looking for recommendations on intrusion detection > > software, if y'all know of any... > > I just took a look at the package, it's still in the 'hamm' archives. > The problem appears to be the license. In fact, there is no license at > all. In the file 'DISCLAIMER', it says: > > # Copyright (c) 1995 > # The Regents of the University of California. All rights reserved. > > The 'All rights reserved.' part means that you are not allowed to copy of > modiy it. Therefore it cannot be distributed at all, except by the > copyright owner. > > You can still get it here: > > ftp://archive.debian.org/debian-archive/dists/hamm/main/binary-i386/net/courtney_1.3-3.deb > > Install with 'dpkg -i courtney_1.3-3.deb' after you downloaded it. > > Remco > -- > rd1936: 4:10pm up 3 days, 5 min, 6 users, load average: 1.58, 1.58, 1.63 -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
what happened to courtney?
folks, i am building a new firewall machine and in the process discovered that courteny is no longer available as a debian package? can someone verify this, or did i miss something? also am looking for recommendations on intrusion detection software, if y'all know of any... thanks in advance, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
mysql install error
folks, i have an apperantly broken installation of mysql server. this started under the old hamm version and now that i have upgraded to slink it is still there. in fact it was the only error reported during the upgrade. following are the error messages from the install. any help, tips, rtfms are appreciated especially if you can point me at the fm. i should point out that trying to remove the package results in basically the same problem, and yes i am running this as root. - error message from mysql install - (Reading database ... 48062 files and directories currently installed.) Removing mysql-server ... You must be root to start, stop or restart mysqld. dpkg: error processing mysql-server (--remove): subprocess pre-removal script returned error exit status 1 mysql privilege databases already installed. If you want to recreate all privilege tables, execute 'rm -i /var/lib/mysql/mysql/*.IS?' and run /usr/bin/mysql_install_db You can now start the new mysql server with: /usr/bin/safe_mysqld -l & Plese report any problems with the /usr/bin/mysqlbug script You must be root to start, stop or restart mysqld. dpkg: error while cleaning up: subprocess post-installation script returned error exit status 1 Errors were encountered while processing: mysql-server E: Sub-process returned an error code --- tia, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
Re:/etc/hosts on one machine
you can achive this using nis. alternatevely you could create a symlink from /etc/hosts to an nfs mounted parition where you would actually keep the host file. i would however *not* recommend this (second) option. if your network went south you would not have any name resolution, if in fact you only rely on /etc/hosts. //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
sybase rpm
folks, has anyone tried installing the sybase rpm package? we are needing to install a "professional" database and i would love to put it on a debian system if possible. if anyone is willing to share their experiences doing this i am willing to learn tia, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
fax software?
folks, does anyone know if there are any fax server software that will run on linux? tia, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
storage hardware
can anyone recommend a raid storage or fibre channel storage device for linux? i am looking for 75-150 GB of storage and would love to run it on a linux system. i would prefer a fibre channel solution if it exists and the price is right. thanks in advance, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
Re: debian-user-digest Digest V99 #97
frederic, not sure, but check out the mtx utility. it will move the robotic mechanism on DDS autoloaders. its available in the debian distribution, or alternatively from: http://www.dandelion.com/Linux/mtx-1.1.tar.gz hope this helps a little, //daryl >Been a while since I've been around on this list, however things have >progressed. I have successfully installed two older Compaq EISA Pentium 90 >machines, each wtih 4 gigs of space, and 128MB of RAM, all of which are >visible to the respective machines. On the first machine, I have mounted >two 7-changer CDROMs which seem to work just dandy, and the second machine, >has an ADIC 4mm Virtual Library. The two Sony 4mm DATs inside are visable, >and I successfully did a backup, by moving the robot arm out of the way, >inserting a tape, performing a backup with TAR per the how-to's, then eject. > >My question is as follows: Does anyone know of a piece of software, >driver, or something that enables the robot arm to move? I have the >documentation somewhere, so if I could just send SCSI commands, I could use >a script scheduled by CRON to achieve what I'm trying to do. -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
libc 6 or 5
folks, i have to confess - i am somewhat confused over this issue. the reason it's come up right now is netscape, i get inconsistent results using either version is there a definitive method for finding out which libc i am using? i am running debian hamm with a 2.0.34 kernel. thanks in advance, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
dualboot linux and NT?
folks, i have a system running linux debian hamm with kernel 2.0.34. this system has 2 IDE drives. linux is installed on the 1st disk and boot using lilo. i have windows NT on the second disk which is set as a slave IDE disk. when i try to boot windows NT from lilo i get the an error message from the system that says is cant find NTLDR. i am assuming this error message is comming from the NT boot loader. i have read the howtos on dual booting but none of them address this kind of setup with 2 disks. it looks like i might have to edit the boot.ini file on NT, but that could result in an unbootable system so i am trying to get some feedback before proceeding that down road. any ideas, tips, etc. are welcomed. thanks in advance, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
too many open files
folks,
i've recently reinstalled my debian system and i am now
getting the following error message:
Jan 12 09:00:15 random amd[1162]: setmntent("/etc/mtab", "r+"): Too many
open files
any ideas, or pointers to the fm are welcomed.
thanks in advance,
//daryl
--
Daryl Williams
Network Administrator mailto:[EMAIL PROTECTED]
ShareWave, Inc. Phone: 916-939-9400 x3212
5175 Hillsdale Circle Fax: 916-939-9434
El Dorado Hills, CA. 95762Web: http://www.sharewave.com
iomega (atapi) zip drive?
folks, does anyone know if there is support for iomega's ATPI zip drive? i have one attached to the primary IDE controller of a DELL pentium running a 2.0.34 kernel. any pointers would be very welcome. tia, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
Re: kernel compilation and as86?
hi henning, thanks for your quick response. i did not install the bin86 package because the (short) pkg description daid it is a 16 bit compiler. on further examination i see that it is the assembler used to create the 16-bit bootsector. i should have read it more carefully the 1st time.. :) i am downloading the package right now. thanks again for your help. //daryl Henning Makholm wrote: > Daryl Williams <[EMAIL PROTECTED]> writes: > > > i am trying to compile a 2.0.34 kernel and getting the following > > error message: > > > > as86 -0 -a -o bootsect.o bootsect.s > > make[1]: as86: Command not found > > Do you have the bin86 package installed? > If so, something is wrong and you might want to try to reinstall it. > It not, install it. > > -- > Henning Makholm > http://www.diku.dk/students/makholm -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
kernel compilation and as86?
folks, i am trying to compile a 2.0.34 kernel and getting the following error message: as86 -0 -a -o bootsect.o bootsect.s make[1]: as86: Command not found now i've compiled kernels often enough and never run in to this problem before. the assembler installed from binutils is /bin/as and it does not understand any of the flags in the Makefile for as86. what changed? any ideas, clues, rtfms (with a pointer to the fm) are very welcome. thanks in advance, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
?what version of glibc?
i am running debian linux 2.0.34 and i need to determine what version of glibc and libthread are installed on the system. i did a strings on libc that yielded the following information: GNU C Library production release version 2.0.7, by Roland McGrath et al. but running strings on libpthread yields no success. is there a better way to determine the version of a library? tia, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
yp libs?
folks, i am trying to find a yp library (for linux) to link against. specifically i am looking for the following functions: yp_get_default_domain yperr_string yp_match any ideas, tips, faqs, rtfms (with a pointer to the fm) are very weclome. tia, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com
real 3d video card supported in XF86?
folks, does anyone know if the real 3rd video card is supported by the XF86 system, and if so, what chipset it uses? thanks in advance, //daryl
how to boot into single user mode?
folks, after successfuly downloading and installing debian 2.0, i foolishly set it to start xdm at boot time. unfortunatly i did not get the X server configured correctly and i am now unable to login at the console. i am also not able to remote login because the console is secured against root ogins and i did not create any user accounts. i figure the only way to fix this is to boot into single user mode and remove the xdm entries, however i am not sure how to do this in linux... needless to say i am feeling very stupid right about now. any help would be appreciated. //daryl
problem w/dselect via ftp
folks, i am having a problem using the ftp option with dselect. i am able to login to ftp.debian.org and various mirros however i am getting an error message that states: Could not find Packages in stable/binary-i386 is this a known problem, or has something changed (path?) since the release of debian 2.0? thanks in advance. //daryl
how to change the timezone
can anyone tell me how/where to change the timezone? tia, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
Re: pci problem with dell
hi stephane, thanks for your response. i have finally gotten the ethernet working using a 3com 3c905 card. i had previously been trying to get it to work with a 3c905B without any luck. thanks again, //daryl Stephane Bortzmeyer wrote: > On Tuesday 16 June 1998, at 12 h 3, the keyboard of Daryl Williams > <[EMAIL PROTECTED]> wrote: > > > i have installed debian 1.3 on a dell dimension xps 333 mhz system. > > I have Debian on a Dell Optiplex. > > > Warning : Unknown PCI device (8086:7111). Please read > > include/linux/pci.h > > Harmless. Will disappear in recent kernels when the PCI database will > grow. This is not a Debian problem but a kernel problem. What version? > > > i am also unable to install my ethernet drivers (i am using pci > > adapters). > > Which card? The Vortex (3c59x) works fine on my 3com 3c900. What are the > error messages? -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: pci problem with dell
mark, thanks for your reply. i am have a 3com 3c905B-TX card as well as a Kingston 10/100 card that is an NB2000 clone. they both show up in /proc/pci, however i was unable to install the drivers for either. i have just finished loading the base system from disk and was planning on using ftp to get the rest of the o.s. however now i am in a catch-22 situation as i cannot see the network. is there any way to try to install the drivers without going through the installation again? thanks in advance, //daryl Mark H. Mabry wrote: > >>>>> "Daryl" == Daryl Williams <[EMAIL PROTECTED]> > >>>>> wrote the following on Tue, 16 Jun 1998 12:03:26 -0700 > > Daryl> i have installed debian 1.3 on a dell dimension xps 333 mhz > Daryl> system. everything appears to have gone well except for ta > Daryl> problem with the pci bus and the ethernet drivers. here is > Daryl> the error message i am getting: > > Daryl> Warning : Unknown PCI device (8086:7111). Please read > Daryl> include/linux/pci.h > > I believe if you upgrade to the latest stable Debian, this warning > will go away. If I remember correctly, they are harmless. > > Daryl> i am also unable to install my ethernet drivers (i am using > Daryl> pci adapters). has anyone else seen this problem? or know of > Daryl> a fix? any hints, rtfms, etc. would be welcomed. > > What ethernet card are you using? > > Mark Mabry > [EMAIL PROTECTED] -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
pci problem with dell
i have installed debian 1.3 on a dell dimension xps 333 mhz system. everything appears to have gone well except for ta problem with the pci bus and the ethernet drivers. here is the error message i am getting: Warning : Unknown PCI device (8086:7111). Please read include/linux/pci.h i am also unable to install my ethernet drivers (i am using pci adapters). has anyone else seen this problem? or know of a fix? any hints, rtfms, etc. would be welcomed. tia, //daryl -- Daryl Williams Network Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 x3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
how to multi home a system?
i expect that there is a faq for this, however i have not been able to find it. i want to setup a box as a router. how do i plumb a second ethernet interface under debian? if there is not a faq for this, i will be glad to summarize any replies and start the faq... tia, //daryl -- Daryl Williams Network and Systems Administrator mailto:[EMAIL PROTECTED] ShareWave, Inc. Phone: 916-939-9400 ext. 3212 5175 Hillsdale Circle Fax: 916-939-9434 El Dorado Hills, CA. 95762Web: http://www.sharewave.com -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
? missing files... ?
hello. i' am looking for a little help form anyone with a little more experience with the debian distribution. i have installed debian 1.3 over the net (yes it was slow) and i have it up and running including xfree86. however i do not appear to have a complete development environment. although i have installed gcc and other development pkgs i still do not appear to have the make program or stdio.h for that matter. does anyone know what package these utilities come in, either one of the basic ones, or a development package? you help is much appreciated. //daryl -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
