Hi, I'm running Debian unstable and I'm trying to set up MythTV to use my Twinhan VisionPlus DVB card. The card gets detected at boot time with no problems, and the appropriate modules are loaded, but udev (0.070-2) never creates any nodes in /dev for it.
The udev.rules file contains a match entry for 'KERNEL=="dvb*"', so I added a catch-all entry that matches 'KERNEL=="*"', and outputs the kernel device name to a file. Nowhere was there any dvb entries, despite the dmesg output showing something about "dvb0" Since my end goal is to get the card working under mythtv (which expects the device to be under /dev/dvb/adapter*), and all the documentation I see points to the fact that udev should magically create all this, does anyone have any ideas as to how I can proceed? Thanks, -Grant ## dmesg excerpt: agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart: AGP aperture is 32M @ 0xe8000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 5, latency: 32, mmio: 0xed004000 bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00f100fe [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 5, latency: 32, memory: 0xed005000 btaudio: driver version 0.7 loaded [digital+analog] usbcore: registered new driver usbfs usbcore: registered new driver hub ## dvb files that I assume are created by the /sbin/MAKEDEV script ## (I have no idea if this affects anything) kenshi:~# find /dev -name "*dvb*" /dev/.static/dev/dvb kenshi:~# ls /dev/.static/dev/dvb adapter0 adapter1 adapter2 adapter3 kenshi:~# ls /dev/.static/dev/dvb/adapter0 audio0 ca0 demux0 dvr0 frontend0 net0 osd0 video0