Debian 4.0 with Intel ISP-2150G + Adaptec RAID 2100S
Hi and hello! I have a little problem with installation of Etch on Intel ISP-2150G rack 2U server with PCI Adaptec 2100S RAID controller (2 disks in raid-1 matrix). The installation was good to the first reboot (successful disk partitioning and creating /dev/sda). After reboot "Waiting for root partition" The kernel is checking I2O and failed. I try with acpi=off and also failed. I also try modprobe in BusyBox and failed. This hardware configuration works with Debian 3.1 kernel 2.4.27-686 and 2.6.8-686. I2O subsystem v1.325 i2o: max drivers = 8 i2o: checking for PCI I2O controller... ACPI: PCI Interrupt :02:04.1[A] -> GSI 20 (level, low) -> IRQ 169 iop0: Controller found (:02:04.1) (..) iop0: Installed at IRQ 169 i2o: iop0: Activating I2O controller... i2o: iop0: This may take a few minutes if (...) iop0: HRT has 1 entries of 16 bytes each. Adapter 0012: TID :[HPC*]:PCI 1: Bus 1 Device 22 Function 0 i2o: iop0: Controller added Loading Adaptec I2O RAID: version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... PCI: Unable to reserve mem region #1:[EMAIL PROTECTED] for device :02:04.1 dpti: adpt_config_hba: pci request region failed Could not Init an I2O RAID device Will not try to detect others. I2O Block Device OSM v1.325 i2o/hda: i2o/hda1 (...) hda10 ... ?"Waiting for root partition"? ... (initramfs) cat /proc/modules i2o_block 0 i2o_core 1 (initramfs) modprobe dpt_i2o It returns a message like "PCI: Unable to reserve ..." *
Problem with Adaptec SCSI RAID 2130SLP on x86
Hello! I am using Debian 3.1r0 "Sarge" and I am trying to install this great OS but installer can't see my RAID matrix, but it's exists. Motherboard's BIOS sees the controller and controller sees disk drives. All is ok util "Partition disk" step is showing. It says there's no hard drive. I know the main chipset on this Adaptec controller is AIC-7902 or AIC-7942, and I saw kernel drivers aic7xxx and aic79xx in kernel. My hardware: Intel SR2300 - dual Pentium 4 2.80 GHz with 2x512 MB RAM Adaptec SCSI RAID 2130SLP (one channel 320 MB/s) as PCI-X 2 x SCSI disk Segate Cheetach 36GB 2 x network card eepro1000 Is this true, Debian installer don't support this controller? Should I send you some files/code - what kind of? How to debug it? luke //ICQ: 315302320// -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]