Hi all, I have a server with 3 Ethernet interfaces
eth0 (ppp0) = internet conexion = DHCP ADSL = dinamic IP address gateway = 200.216.X.X eth1 = internal network = 192.168.0.200 eth2 = internet access = 200.xxx.xxx.xxx gateway = 200.X.X.X This means I have two internet access in the same server. In my LAN I'm using the IP scope 192.168.0.0 to 192.168.0.254 and i want split this IP addresses to make half use one internet acces and the other half use the other internet acces. Like this: >From 192.1.0.0 to 192.168.0.128 use the the eth0(ppp0) interface and >From 192.168.0.128 to 192.168.0.254 use the eth2 interface. I try to do this using iptables and iproute2: iptables iptables -t mangle -A PREROUTING -s 192.168.0.0/25 -j MARK --set-mark 1 iptables -t mangle -A PREROUTING -s 192.168.0.128/25 -j MARK --set-mark 2 iproute2 echo 200 eth0 >> /etc/iproute2/rt_tables echo 202 eth2 >> /etc/iproute2/rt_tables ip route add fwmark 1 table eth0 ip route add fwmark 2 table eth2 ip rule add from 192.168.0.0/25 table eth0 ip rule add from 192.168.0.128/25 table eth2 ip route add 192.168.0.0/25 dev eth1 scope link table eth0 ip route add default via 200.216.X.X dev ppp0 table eth0 ip route add 192.168.0.128/25 dev eth1 scope link table eth2 ip route add default via 200.X.X.X dev ppp0 table eth2 ip route flush cache Made this the lower half IP scope (192.168.0.0-128) works fine and get internet access througth eth2, but the hier IP scope doesn't get internet access thougth eth1(ppp0) and neither by eth2. I have used traceroute command to see what is goin on and I found this: the hier scope got until the eth1(ppp0) and die over it. traceroute www.google.com traceroute to www.google.akadns.net (216.239.53.99), 30 hops max, 38 byte packets 1 192.168.0.125 (192.168.0.250) 2.121 ms 1.688 ms 2.171 ms 2 200.216.95.209 (200.216.xx.xxx) 27.330 ms 32.407 ms 31.147 ms 3 * * * 4 * * * I wrote the larctc and I print it to read more times.... I really need read it more times .... but I want to know if someone alredy deal with this situation or has a problem like this. I really want some help. Regards, -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]