If there are drives on the primary channel, I run into errors such as the following:
hdj: set_drive_speed_status: status=0xff { Busy }
hdi: max request size: 128KiB
hdi: status timeout: status=0xff { Busy }
I'm really quite lost as to what the problem may be. I've tried so many different things I don't know what else to do besides not use the primary chain.
I've attached my lspci -v ; my dmesg ; and my kernel .config (2.6.2-rc2)
Thanks, Mike Garrison [EMAIL PROTECTED]
dmesg:
Jan 27 09:27:46 crypto syslogd 1.4.1#13: restart.
Jan 27 09:27:46 crypto kernel: klogd 1.4.1#13, log source = /proc/kmsg started.
Jan 27 09:27:46 crypto kernel: Inspecting /boot/System.map-2.6.2-rc2
Jan 27 09:27:46 crypto kernel: Loaded 17788 symbols from /boot/System.map-2.6.2-rc2.
Jan 27 09:27:46 crypto kernel: Symbols match kernel version 2.6.2.
Jan 27 09:27:46 crypto kernel: No module symbols loaded - kernel modules not enabled. Jan 27 09:27:46 crypto kernel: Linux version 2.6.2-rc2 ([EMAIL PROTECTED]) (gcc version 3.3.3 20040110 (prerelease) (Debian)) #5 Tue Jan 2
7 09:20:55 EST 2004
Jan 27 09:27:46 crypto kernel: BIOS-provided physical RAM map:
Jan 27 09:27:46 crypto kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Jan 27 09:27:46 crypto kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 27 09:27:46 crypto kernel: BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
Jan 27 09:27:46 crypto kernel: BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Jan 27 09:27:46 crypto kernel: BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
Jan 27 09:27:46 crypto kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Jan 27 09:27:46 crypto kernel: 255MB LOWMEM available.
Jan 27 09:27:46 crypto kernel: On node 0 totalpages: 65520
Jan 27 09:27:46 crypto kernel: DMA zone: 4096 pages, LIFO batch:1
Jan 27 09:27:46 crypto kernel: Normal zone: 61424 pages, LIFO batch:14
Jan 27 09:27:46 crypto kernel: HighMem zone: 0 pages, LIFO batch:1
Jan 27 09:27:46 crypto kernel: DMI 2.3 present.
Jan 27 09:27:46 crypto kernel: ACPI: RSDP (v000 VT8363 ) @ 0x000f7ec0
Jan 27 09:27:46 crypto kernel: ACPI: RSDT (v001 VT8363 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
Jan 27 09:27:46 crypto kernel: ACPI: FADT (v001 VT8363 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
Jan 27 09:27:46 crypto kernel: ACPI: DSDT (v001 VT8363 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Jan 27 09:27:46 crypto kernel: Building zonelist for node : 0
Jan 27 09:27:46 crypto kernel: Kernel command line: auto BOOT_IMAGE=LinuxNEW ro root=301
Jan 27 09:27:46 crypto kernel: Initializing CPU#0
Jan 27 09:27:46 crypto kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
Jan 27 09:27:46 crypto kernel: Detected 902.342 MHz processor.
Jan 27 09:27:46 crypto kernel: Using tsc for high-res timesource
Jan 27 09:27:46 crypto kernel: Console: colour VGA+ 80x25
Jan 27 09:27:46 crypto kernel: Memory: 256464k/262080k available (1545k kernel code, 4892k reserved, 467k data, 136k init, 0k highme
m)
Jan 27 09:27:46 crypto kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jan 27 09:27:46 crypto kernel: Calibrating delay loop... 1777.66 BogoMIPS
Jan 27 09:27:46 crypto kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 27 09:27:46 crypto kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan 27 09:27:46 crypto kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jan 27 09:27:46 crypto kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jan 27 09:27:46 crypto kernel: CPU: L2 Cache: 256K (64 bytes/line)
Jan 27 09:27:46 crypto kernel: Intel machine check architecture supported.
Jan 27 09:27:46 crypto kernel: Intel machine check reporting enabled on CPU#0.
Jan 27 09:27:46 crypto kernel: CPU: AMD Athlon(tm) processor stepping 02
Jan 27 09:27:46 crypto kernel: Enabling fast FPU save and restore... done.
Jan 27 09:27:46 crypto kernel: Checking 'hlt' instruction... OK.
Jan 27 09:27:46 crypto kernel: POSIX conformance testing by UNIFIX
Jan 27 09:27:46 crypto kernel: NET: Registered protocol family 16
Jan 27 09:27:46 crypto kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=1
Jan 27 09:27:46 crypto kernel: PCI: Using configuration type 1
Jan 27 09:27:46 crypto kernel: mtrr: v2.0 (20020519)
Jan 27 09:27:46 crypto kernel: ACPI: Subsystem revision 20031002
Jan 27 09:27:46 crypto kernel: ACPI: Interpreter enabled
Jan 27 09:27:46 crypto kernel: ACPI: Using PIC for interrupt routing
Jan 27 09:27:46 crypto kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Jan 27 09:27:46 crypto kernel: PCI: Probing PCI hardware (bus 00)
Jan 27 09:27:46 crypto kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Jan 27 09:27:46 crypto kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
Jan 27 09:27:46 crypto kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Jan 27 09:27:46 crypto kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Jan 27 09:27:46 crypto kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
Jan 27 09:27:46 crypto kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jan 27 09:27:46 crypto kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Jan 27 09:27:46 crypto kernel: PCI: Using ACPI for IRQ routing
Jan 27 09:27:46 crypto kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Jan 27 09:27:46 crypto kernel: Machine check exception polling timer started.
Jan 27 09:27:46 crypto kernel: Applying VIA southbridge workaround.
Jan 27 09:27:46 crypto kernel: pty: 256 Unix98 ptys configured
Jan 27 09:27:46 crypto kernel: Real Time Clock Driver v1.12
Jan 27 09:27:46 crypto kernel: Using anticipatory io scheduler
Jan 27 09:27:46 crypto kernel: FDC 0 is a post-1991 82077
Jan 27 09:27:46 crypto kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Jan 27 09:27:46 crypto kernel: loop: loaded (max 8 devices)
Jan 27 09:27:46 crypto kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
Jan 27 09:27:46 crypto kernel: 0000:00:0c.0: 3Com PCI 3c905C Tornado at 0xc800. Vers LK1.1.19
Jan 27 09:27:46 crypto kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 27 09:27:46 crypto kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 27 09:27:46 crypto kernel: VP_IDE: IDE controller at PCI slot 0000:00:07.1
Jan 27 09:27:46 crypto kernel: VP_IDE: chipset revision 6
Jan 27 09:27:46 crypto kernel: VP_IDE: not 100%% native mode: will probe irqs later
Jan 27 09:27:46 crypto kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 27 09:27:46 crypto kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
Jan 27 09:27:46 crypto kernel: ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:DMA, hdb:DMA
Jan 27 09:27:46 crypto kernel: ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:DMA, hdd:DMA
Jan 27 09:27:46 crypto kernel: hda: IBM-DJNA-371350, ATA DISK drive
Jan 27 09:27:46 crypto kernel: hdb: WDC WD1200BB-22CAA0, ATA DISK drive
Jan 27 09:27:46 crypto kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 27 09:27:46 crypto kernel: hdc: WDC WD800BB-32CCB0, ATA DISK drive
Jan 27 09:27:46 crypto kernel: hdd: WDC WD307AA, ATA DISK drive
Jan 27 09:27:46 crypto kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jan 27 09:27:46 crypto kernel: PDC20267: IDE controller at PCI slot 0000:00:09.0
Jan 27 09:27:46 crypto kernel: PDC20267: chipset revision 2
Jan 27 09:27:46 crypto kernel: PDC20267: 100%% native mode on irq 11
Jan 27 09:27:46 crypto kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
Jan 27 09:27:46 crypto kernel: ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio
Jan 27 09:27:46 crypto kernel: ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
Jan 27 09:27:46 crypto kernel: hde: WDC WD800BB-00BSA0, ATA DISK drive
Jan 27 09:27:46 crypto kernel: hdf: WDC WD800BB-00BSA0, ATA DISK drive
Jan 27 09:27:46 crypto kernel: ide2 at 0xa000-0xa007,0xa402 on irq 11
Jan 27 09:27:46 crypto kernel: hdg: WDC WD800BB-00CAA0, ATA DISK drive
Jan 27 09:27:46 crypto kernel: hdh: Maxtor 4G160J8, ATA DISK drive
Jan 27 09:27:46 crypto kernel: ide3 at 0xa800-0xa807,0xac02 on irq 11
Jan 27 09:27:46 crypto kernel: PDC20269: IDE controller at PCI slot 0000:00:0b.0
Jan 27 09:27:46 crypto kernel: PDC20269: chipset revision 2
Jan 27 09:27:46 crypto kernel: PDC20269: 100%% native mode on irq 10
Jan 27 09:27:46 crypto kernel: ide4: BM-DMA at 0xc400-0xc407, BIOS settings: hdi:pio, hdj:pio
Jan 27 09:27:46 crypto kernel: ide5: BM-DMA at 0xc408-0xc40f, BIOS settings: hdk:pio, hdl:pio
Jan 27 09:27:46 crypto kernel: hdi: WDC WD1000BB-00CCB0, ATA DISK drive
Jan 27 09:27:46 crypto kernel: hdj: WDC WD800BB-75CAA0, ATA DISK drive
Jan 27 09:27:46 crypto kernel: hdj: set_drive_speed_status: status=0xff { Busy }
Jan 27 09:27:46 crypto kernel: ide4 at 0xb400-0xb407,0xb802 on irq 10
Jan 27 09:27:46 crypto kernel: hda: max request size: 128KiB
Jan 27 09:27:46 crypto kernel: hda: 26712000 sectors (13676 MB) w/1966KiB Cache, CHS=26500/16/63
Jan 27 09:27:46 crypto kernel: hda: hda1 hda2 < hda5 >
Jan 27 09:27:46 crypto kernel: hdb: max request size: 128KiB
Jan 27 09:27:46 crypto kernel: hdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
Jan 27 09:27:46 crypto kernel: hdb: hdb1
Jan 27 09:27:46 crypto kernel: hdc: max request size: 128KiB
Jan 27 09:27:46 crypto kernel: hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
Jan 27 09:27:46 crypto kernel: hdc: hdc1
Jan 27 09:27:46 crypto kernel: hdd: max request size: 128KiB
Jan 27 09:27:46 crypto kernel: hdd: 60074784 sectors (30758 MB) w/2048KiB Cache, CHS=59598/16/63
Jan 27 09:27:46 crypto kernel: hdd: hdd1
Jan 27 09:27:46 crypto kernel: hde: max request size: 128KiB
Jan 27 09:27:46 crypto kernel: hde: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
Jan 27 09:27:46 crypto kernel: hde: hde1
Jan 27 09:27:46 crypto kernel: hdf: max request size: 128KiB
Jan 27 09:27:46 crypto kernel: hdf: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
Jan 27 09:27:46 crypto kernel: hdf: hdf1
Jan 27 09:27:46 crypto kernel: hdg: max request size: 128KiB
Jan 27 09:27:46 crypto kernel: hdg: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63
Jan 27 09:27:46 crypto kernel: hdg: hdg1
Jan 27 09:27:46 crypto kernel: hdh: max request size: 1024KiB
Jan 27 09:27:46 crypto kernel: hdh: 320173056 sectors (163928 MB) w/2048KiB Cache, CHS=19929/255/63
Jan 27 09:27:46 crypto kernel: hdh: hdh1
Jan 27 09:27:46 crypto kernel: hdi: max request size: 128KiB
Jan 27 09:27:46 crypto kernel: hdi: status timeout: status=0xff { Busy }
Jan 27 09:27:46 crypto kernel: Jan 27 09:27:46 crypto kernel: hdi: 195371568 sectors (100030 MB) w/2048KiB Cache, CHS=65535/16/63
Jan 27 09:27:46 crypto kernel: hdi:hdi: status timeout: status=0xff { Busy }
Jan 27 09:27:46 crypto kernel: Jan 27 09:27:46 crypto kernel: PDC202XX: Primary channel reset.
Jan 27 09:27:46 crypto kernel: ide4: reset timed-out, status=0xff
Jan 27 09:27:46 crypto kernel: hdi: status timeout: status=0xff { Busy }
Jan 27 09:27:46 crypto kernel: Jan 27 09:27:46 crypto kernel: PDC202XX: Primary channel reset.
Jan 27 09:27:46 crypto kernel: ide4: reset timed-out, status=0xff
Jan 27 09:27:46 crypto kernel: end_request: I/O error, dev hdi, sector 0
Jan 27 09:27:46 crypto kernel: end_request: I/O error, dev hdi, sector 0
Jan 27 09:27:46 crypto kernel: unable to read partition table
Jan 27 09:27:46 crypto kernel: hdj: max request size: 128KiB
Jan 27 09:27:46 crypto kernel: hdj: status timeout: status=0xff { Busy }
Jan 27 09:27:46 crypto kernel: Jan 27 09:27:46 crypto kernel: hdj: 156250000 sectors (80000 MB) w/2048KiB Cache, CHS=65535/16/63
Jan 27 09:27:46 crypto kernel: hdj:hdj: status timeout: status=0xff { Busy }
Jan 27 09:27:46 crypto kernel: Jan 27 09:27:46 crypto kernel: PDC202XX: Primary channel reset.
Jan 27 09:27:46 crypto kernel: ide4: reset timed-out, status=0xff
Jan 27 09:27:46 crypto kernel: hdj: status timeout: status=0xff { Busy }
Jan 27 09:27:46 crypto kernel: Jan 27 09:27:46 crypto kernel: PDC202XX: Primary channel reset.
Jan 27 09:27:46 crypto kernel: ide4: reset timed-out, status=0xff
Jan 27 09:27:46 crypto kernel: end_request: I/O error, dev hdj, sector 0
Jan 27 09:27:46 crypto kernel: end_request: I/O error, dev hdj, sector 0
Jan 27 09:27:46 crypto kernel: unable to read partition table
Jan 27 09:27:46 crypto kernel: mice: PS/2 mouse device common for all mice
Jan 27 09:27:46 crypto kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 27 09:27:46 crypto kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 27 09:27:46 crypto kernel: device-mapper: 4.0.0-ioctl (2003-06-04) initialised: [EMAIL PROTECTED]
Jan 27 09:27:46 crypto kernel: NET: Registered protocol family 2
Jan 27 09:27:46 crypto kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Jan 27 09:27:46 crypto kernel: TCP: Hash tables configured (established 16384 bind 32768)
Jan 27 09:27:46 crypto kernel: NET: Registered protocol family 1
Jan 27 09:27:46 crypto kernel: VFS: Mounted root (ext2 filesystem) readonly.
Jan 27 09:27:46 crypto kernel: Freeing unused kernel memory: 136k freed
Jan 27 09:27:46 crypto kernel: Adding 2097136k swap on /dev/hda5. Priority:-1 extents:1
Jan 27 09:27:46 crypto kernel: NET: Registered protocol family 17
lspci -v:
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device e212
Flags: bus master, medium devsel, latency 8
Memory at da000000 (32-bit, prefetchable) [size=16M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Capabilities: [80] Power Management version 2
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Flags: bus master, medium devsel, latency 32
I/O ports at 9000 [size=16]
Capabilities: [c0] Power Management version 2
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at 9400 [size=32]
Capabilities: [80] Power Management version 2
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at 9800 [size=32]
Capabilities: [80] Power Management version 2
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device e212
Flags: medium devsel, IRQ 5
Capabilities: [68] Power Management version 2
00:09.0 Unknown mass storage controller: Promise Technology, Inc. 20267 (rev 02)
Subsystem: Promise Technology, Inc. Ultra100
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at a000 [size=8]
I/O ports at a400 [size=4]
I/O ports at a800 [size=8]
I/O ports at ac00 [size=4]
I/O ports at b000 [size=64]
Memory at dc000000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [58] Power Management version 1
00:0b.0 Unknown mass storage controller: Promise Technology, Inc. 20269 (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra133TX2
Flags: bus master, 66Mhz, slow devsel, latency 32, IRQ 10
I/O ports at b400 [size=8]
I/O ports at b800 [size=4]
I/O ports at bc00 [size=8]
I/O ports at c000 [size=4]
I/O ports at c400 [size=16]
Memory at dc020000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=16K]
Capabilities: [60] Power Management version 1
00:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 6c)
Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at c800 [size=128]
Memory at dc024000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1) (prog-if 00 [VGA])
Subsystem: Hercules: Unknown device 0020
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at d8000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
kernel .config # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y
# # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y
# # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y
# # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y # CONFIG_HPET_TIMER is not set # CONFIG_HPET_EMULATE_RTC is not set # CONFIG_SMP is not set CONFIG_PREEMPT=y # CONFIG_X86_UP_APIC is not set CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y
# # Power management options (ACPI, APM) # # CONFIG_PM is not set
# # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_ASUS=m CONFIG_ACPI_TOSHIBA=m # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_RELAXED_AML is not set
# # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set
# # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_HOTPLUG is not set
# # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m # CONFIG_BINFMT_MISC is not set
# # Device Drivers #
# # Generic Driver Options #
# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set
# # Parallel port support # # CONFIG_PARPORT is not set
# # Plug and Play support #
# # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_LBD is not set
# # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y
# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set # CONFIG_IDE_TASKFILE_IO is not set
# # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set # CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_NS87415 is not set CONFIG_BLK_DEV_PDC202XX_OLD=y # CONFIG_PDC202XX_BURST is not set CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_HD is not set
# # SCSI device support # # CONFIG_SCSI is not set
# # Multi-device support (RAID and LVM) # CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=y CONFIG_DM_IOCTL_V4=y
# # Fusion MPT device support #
# # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set
# # I2O device support # # CONFIG_I2O is not set
# # Networking support # CONFIG_NET=y
# # Networking options # CONFIG_PACKET=m # CONFIG_PACKET_MMAP is not set CONFIG_NETLINK_DEV=m CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_IPV6 is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_NETFILTER is not set
# # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set
# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set
# # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y
# # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set
# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y # CONFIG_TYPHOON is not set
# # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set
# # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set
# # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set
# # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set
# # Token Ring devices # # CONFIG_TR is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set
# # Wan interfaces # # CONFIG_WAN is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # IrDA (infrared) support # # CONFIG_IRDA is not set
# # Bluetooth support # # CONFIG_BT is not set
# # ISDN subsystem # # CONFIG_ISDN_BOOL is not set
# # Telephony Support # # CONFIG_PHONE is not set
# # Input device support # CONFIG_INPUT=y
# # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set
# # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set
# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set
# # Serial drivers # # CONFIG_SERIAL_8250 is not set
# # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256
# # Mice # CONFIG_BUSMOUSE=m # CONFIG_QIC02_TAPE is not set
# # IPMI # # CONFIG_IPMI_HANDLER is not set
# # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set
# # I2C support # # CONFIG_I2C is not set
# # Multimedia devices # # CONFIG_VIDEO_DEV is not set
# # Digital Video Broadcasting Devices # # CONFIG_DVB is not set
# # Graphics support # # CONFIG_FB is not set CONFIG_VIDEO_SELECT=y
# # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y
# # Sound # # CONFIG_SOUND is not set
# # USB support # # CONFIG_USB is not set # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_GADGET is not set
# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set CONFIG_MINIX_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set
# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set
# # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set
# # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y
# # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set
# # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_EXPORTFS is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set
# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y
# # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m # CONFIG_NLS_ISO8859_13 is not set CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set
# # Profiling support # # CONFIG_PROFILING is not set
# # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_FRAME_POINTER is not set
# # Security options # # CONFIG_SECURITY is not set
# # Cryptographic options # # CONFIG_CRYPTO is not set
# # Library routines # # CONFIG_CRC32 is not set CONFIG_X86_BIOS_REBOOT=y CONFIG_PC=y
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
