How do you install autofs package ?
What are the steps to install the automounter system under 2.0.34 kernel ? Thanks. -- Philippe BARBELET France
debian installation on HP netserver LH3
How can I install the debian distribution on a HP netserver LH3 whith 3 disks under HP Netraid system ? Thanks. -- Philippe BARBELET R&D IT Manager Mailto:[EMAIL PROTECTED] Tel : +33 (0)2 99 84 20 91 Lucent Technologies BCS Fax : +33 (0)2 99 63 93 31 13, square du Chene Germain - 35510 Cesson-Sevigne - FRANCE
dump and 4mm DAT
Dear debian users, Do you know what are the good parameters to use whith the "dump" command for a 4mm DAT system ? Tank you. Phil. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
2 ethernet cards (more ...)
Hi Debian friends, I have 2 ISA 3C509 ethernet cards in my PC. At boot time, the system says : 3c509: WARNING! Module load-time probing works reliably only for EISA and MCA bus!! loading device 'eth0'... eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 20 af 34 e8 44, IRQ 3. 3c509.c:1.07 6/15/95 [EMAIL PROTECTED] My lilo.conf file is correctly configured : append="ether=0,0,eth1" but the system doesn't see the second card. I think that the probing test doesn't work correctly. If I put just 1 card at a time, the card is always recognized. Thanks for your help. Phil. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
2 ethernet cards
Hello, On my PC (Compaq), I have installed 2 ethernet cards to communicate whith 2 distinct networks. But my system detects just 1 card during the boot process. In a first time I have declared in the /etc/lilo.conf file my two card as follow : append="ether=0,0,eth1" In a second time I changed this and I wrote : append="ether=3,0x300,eth0 ether=5,0x210,eth1" to force the declaration of my 2 cards. Nothing changed. Do you have some help for me ? Thanks. Phil. BARBELET French Guiana - European Space Port. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
2 ethernet cards
Hello, On my PC (Compaq), I have installed 2 ethernet cards to communicate whith 2 distinct networks. But my system detects just 1 card during the boot process. In a first time I have declared in the /etc/lilo.conf file my two card as follow : append="ether=0,0,eth1" In a second time I changed this and I wrote : append="ether=3,0x300,eth0 ether=5,0x210,eth1" to force the declaration of my 2 cards. Nothing changed. Do you have some help for me ? Thanks. Phil. BARBELET -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I have problem with base file installation
Hi Debian Linux Users, I have loaded from ftp.debian.org site all files to install the Linux base on a PC. All was good but... The installation program read the 5 floppy disks from "base-1" to "base-5" but at the end it wrote "Error: checksum is not good". I built the 5 disks again as it was written whith the rawrite2 program and whith an other unix system whith dd command. I had the same result. So I reload the files again from the site and I built again the medias. It's still wrong. Do you know this problem and the solution to apply ? Thank you for your help. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]