Kernel hangs on sound module
Using the debian kernel image 2.4.18 (or 16, 17, etc) I try and insert the module for my sound card (es1371), the kernel hangs. No oops, no messages anywhere, other than a being told loading the module was a success. I have to press the reboot switch to get the machine going again. I pulled out my es1371 sound card and turn onboard audio back on (via82cxxx_audio). When the module is inserted, the kernel hangs again. The last line I see is ac97_codec : AC97 Audio Codec, ID : 0x4943:0x4511 (ICE1232). No other modules are causing problems. So I compiled my own 2.4.19 kernel and built via82cxxx_audio into the kernel. The kernel again hangs when it reaches the sound card. This machine has been running woody for over a year without problems. When woody was released I installed a new HD and a clean new copy of woody. I think this problem happend then, but I rebooted and it went away. I've rebooted many times since then, same kernel, and never had this issue. Now it won't go away. The only other symptom of a problem I have found is that if I tried and boot using the debian kernel-image-2.4.18-bf2.4, the kernel hangs when partition check appears on the screen. It seems like the partition check is finished, but it just hangs there. The es1371 sound card is now working happily in another woody machine. My onboard sound card works fine if I boot into windows XP (XP is on a different HD). Some information about my system is below. Does anyone have any ideas? Thanks. Linux kurylo 2.4.18-k7 #1 Sun Apr 14 13:19:11 EST 2002 i686 unknown Duron 900, 512 RAM, asus A7V motherboard linux is on hda, windowsXP is on hde, and hdf is extra data lspci says my sound card is 00:04.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 50) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: XMMS bug
Peter Jay Salzman wrote: jesus. speak of the devil. i just spent about an hour on this today, in fact. you guys are mind readers. i'm using OSS drivers (not alsa). xmms kept segfaulting. using the process of elimination, i determined it was was the alsa plugin. perhaps we should file a bug report.. i just went searching and I found bugs filed against xmms-alsa debian package and on the bugs.xmms.org sites.
XMMS bug
Running debian woody 2.4.12 I use XMMS all the time and have never had a problem with it. Today I decided to play around with plug-ins so I did a apt-get install `apt-cache search xmms plugin | cut -f1 --delimiter=\ |sed s#smpeg-xmms##` to get all the plugin packages. I did the sed part since smpeg-xmms wouldn't install because libsdl1.2 wasn't availible. Once all the packages are installed and I try to run xmms I get a segmentation fault. If I do remove with the command above to remove all plug ins, then xmms runs fine. I don't have time right now to go through each plug in to see which crashes xmms, but I was wondering if anyone else has thing problem. Steven
Re: dpkg hiding packages?
how does those tools should be used then? presently, if I want to find out application XYZ is available I dpkg -l '*XYZ*' and check the result. if i want something from the list, i then apt-get XYZ-whatever thanks Atleast on my system, dpkg -l XYZ will look for a package already on my system by that name. If I want to know about a package XYZ that isn't on my system I use apt-cache search XYZ then do apt-get install XYZ If I want the details on package XYZ, before I install it, I do apt-cache show XYZ. Steven
Lexmark E210 Printer
I am runing Woody, kernel 2.4.9, using CUPS for printing. I just got a Lexmark E210 laser printer which is supported under linux. They want you to install their ghostscript rpm(or source) and then a cups ppd to use the printer. I have not been able to get the ghostscript package to work under debian. I've used Alien - I then had to use dpkg to force the remove of gs, and then I installed the lemark ghostscript package (the lexmark package conflicted with gs). The alien'ed package doesn't work properly in place of the debian gs package, apt/dpkg become broken because they want to re-install gs. I've tried installing the Lexmark ghostscript from source but it won't compile and if it did I think I'd have the same dependancy problems. Any suggestions?
Re: ne driver in kernel 2.2
Does anyone have any tips to getting a no-name ISA NE?000 clone working with Sid? I does work fine as I rebooted to Mandrake and used it... Is it a PNP card? If so you need to use the isapnp tools. Otherwise the card should have jumpers on it and you can set them to whatever IO and IRQ you want and ignore everything below. Run $ pnpdump -c -o isaconfig You may have to edit the file isaconfig, commenting out the line (ISOLATE PRESERVE) Then run $ isapnp isaconfig Then try $ modprobe ne io=0x where the io is the number that pnpdump reports in the isaconfig file. Steven
Re: woody and php4
I don't have that problem. I installed php4 and edited the apache conf file to enable php4 (the module and the extenions), it worked right away. Now the php4-mysql isn't in woody, but I just grabbed the sid version and its working just fine. Steven At 03:38 PM 6/13/01 -0500, you wrote: is there any schedule as to when the problem with the version of apache, in woody, and php 4 will be fixed? For those that do not understand what I mean. The version of Apache in woody will not work with the version of php4. Wayne -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: /etc/network/interfaces file
You can read man interfaces for the full details, but this is what it should be... # Configure ethernet interface auto eth1 iface eth1 inet static address 10.10.10.254 netmask 255.255.255.0 broadcast 10.10.10.255 The auto eth1 tells it to start on boot up, the iface configures eth1 as a inet (TCP/IP) static address. Then of course the next lines are what that address should be. At 12:38 PM 13/03/2001, Bill Fowler wrote: Hello, I want to make my network config permanent with the /etc/network/interfaces file in Debian 2.2. The file is as follows: # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # # Configure loopback interface ifconfig lo 127.0.0.1 # Configure ethernet interface IPADDR=10.10.10.254 NETMASK=255.255.255.0 BROADCAST=10.10.10.255 ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST} It doesn't seem to work. When I boot up the interface does not get configured. The message I get is: Configuring network interfaces: /etc/network/interfaces: option without interface Any help would be appreciated... Bill -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Remote logins
Hi, I'm running a Debian testing and another machine with stable. I'm trying to setup the machine so only certain users can login in remotely with the sshd, right now any user can. After poking around /etc/security/access.conf seems to be what I want to edit. But I can't seem to get it working and I don't see any other instructions for it, other than the comments in the file. After reading it seems to me that doing - : ALL : ALL EXCEPT LOCAL should stop everyone from logging in remotely, however it seems to have no effect. Either the above is wrong or something needs to be reset for the changes to take affect. The entire system has been rebooted so I can't see that being it. Does the program login have to be edited in some fashion? Or is the directory /etc/security the wrong place to be looking? Steven
Re: Making My Network Work, or Why the Hell Are They Blinking!
Since you only want to pointed in the right direction I suggest you start at www.linuxdoc.org Since that is quite vague you can go here http://linuxdoc.org/HOWTO/Net-HOWTO/index.html And for even more specific type this in on your command line man hosts and man hostname and man gateways and finally man insert anything else you want to know here Personally I found the debain information on setting up on a network, if you didn't do it during install, to be quite lacking. At 07:48 PM 21/12/2000, Xucaen wrote: Hi all.. well it's that time again.. here I am in front of a computer (a few of them, actually) trying to configure my network settings. ahh well, all I can say is a week ago I installed the base system off of floppies and the install configured itself, lastnight I install off of CD and all my network files are empty! ahh well.. I guess this is what they mean by curses... anyways, I found this snippet of info (see below) somewhere on debian.org. I have found numerous info such as this.. helpful.. yes, but the answer? not at all. you see, I have empty files, and tho the snippet of info below tells me what kind of info goes into the files, it does not tell me what format the info should be in. syntax is everything. without syntax, all the info in the world won't help. Now, I hate asking for answers, sincerely.. I don't learn anything by getting answers from people.. but show me where to get answers? ahh.. there's a learning experience I could spend all night with. so, finally to my question. HELP!!! oh sorry, that wasn't the question.. Where can I find the format of these files?(see below) Also, I need to know how to set up /etc/gateways. again, I know what kind of info goes in there, but I haven't a clue about format. I will be right here digging away at this mountain of info on debian hoping to find my syntax. welp, that's my rant for the evening... if I have blabbed too much I do appologize... it must be that new coffee they have at work. /** snippet of info I was telling you all about **/ Ethernet Another popular way to connect to the Internet is via a LAN that uses Ethernet. This gives you a high-speed local network in addition to Internet access. Fortunately, though, you should have already configured Ethernet networking during installation so there isn't much you need to do now. /* sorry, I must interject here.. fortunately I should have already configured netowrking during installation AAARRRGGGHHH! */ If you ever need to modify your configuration, here are the files that you will be interested in: /etc/init.d/network has things such as your IP address, netmask, and default route. /etc/hostname records your hostname. /etc/hosts also records your hostname and IP address. /**/ thanks all xucaen p.s. in reading my email over I see that the tone of this letter could be misconstrued as bad-tempered. really, I am not one to fuss and bicker. I'm actually in pretty good spirits, and to show this fact I will supply a healthy dose of emoticons. But, rather than go back and spread them about the letter, I'll just give them all to you right here.. :-) ;-) =) =]:-) /*this is my abe lincoln emoticon.. four score and seven hours ago, I set fourth to bring upon my puter a new operating system...*/ __ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Firewall for use with cable modem?
At 06:02 PM 19/12/2000, Phillip Deackes wrote: I have spent much of the day getting more and more confused about firewalls and Linux. I am having a cable modem installed soon and want my system to be secure. I have only the one computer, and am running Woody. Is there a free (or low-cost) firewall which will work on Debian? I don't feel confident enough to be messing with ipchains and such. I had a look at Storm Firewall, but this is expensive at 99USD and seems way over the top for what I would need on a single workstation. I downloaded gfcc, but don't understand what to do with it. I have read the Firewall HOWTO but I really don't grasp much of it. I am embarassed to admit that I really want an out-of-box solution - something I can install and perhaps tweak a little as I get more confident. I don't do anything out of the ordinary on the Internet, just the usual mail, news and web. I occasionally use ReadAudio and ftp, but not a lot else. Any ideas? Cheers. -- Phillip Deackes I first installed linux I was setting up a firewall/masq maching. I found the information, and at the end, the firewall scripts at TrinityOS to be very useful. http://www.ecst.csuchico.edu/~dranch/LINUX/index-linux.html#TrinityOS Not sure if they have a pre-made script just for a single machine, but if they don't you can just chop the masq section at the end. Steven
Re: IRQ: how to find out which is to be used?
To find which IRQ a ISA PnP card is using, you need to use the ISA PnP tools. I think it might even be installed with a default debian setup. run pnpdump and it will scan for cards and tell you everything you need to know about the device to get it running. Of course refer to the manfiles (man pnpdump ; man isapnp) or the isapnp website http://www.roestock.demon.co.uk/isapnptools/ Here is part of the results pnpdump returns for me (I have one ISA NIC) (CONFIGURE PNP0060/5931815 (LD 0 # Compatible device id PNP80d6 # Logical device decodes 10 bit IO address lines # Minimum IO base address 0x0200 # Maximum IO base address 0x03e0 # IO base alignment 32 bytes # Number of IO addresses required: 32 # (IO 0 (SIZE 32) (BASE 0x0200) (CHECK)) # IRQ 3, 4, 5, 9, 10, 11, 12 or 15. # High true, edge sensitive interrupt # (INT 0 (IRQ 3 (MODE +E))) (NAME PNP0060/5931815[0]{NE2000 PLUG PLAY ETHERNET CARD}) If you just want to know the IRQ (INT 0 (IRQ 3 (MODE +E))) is all you need to find. My card is on IRQ 3. At 12:39 PM 17/12/2000, Erik Steffl wrote: ktb wrote: On Sun, Dec 17, 2000 at 03:25:56AM -0800, Erik Steffl wrote: I have internal modem (real one, it works, the question is not about it and I know I should get external one:-) which acts as a serial port. It is ISA PnP card, can use different IRQs. My main question is: how do I find out which IRQ it uses using linux tools? the only way I can do it now is boot windows and peek into control panel|system (btw it uses either 9 or 11) Have you taken a look at dmesg yet? I know it shows the irq's of my network cards. Also you can cat /proc/interupts. boot messages: ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ttyS02 at 0x03e8 (irq = 4) is a 16550A so it's completely useless, it just sets it to 'standard' values, I have to manually set it to proper IRQ (I put a line into /etc/serial.conf) /proc/interrupts: the same, it just shows whatever I set. AFAIK it only shows actually received interrupts, so unless I really use the modem it wouldn't show anything, and to use modem I need to know interrupts. isn't there a way to find that out? I don't know how windows do it but they are able to figure it out somehow. erik -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: eth0 on kernel 2.2.17
eth0 isn't suppose to be in /dev If your driver is loaded properly then all you have to do is ifconfig eth0 ipaddress netmask up to configure the device and get it running. Do man ifconfig for details. To have debian configure it automatically on boot up edit /etc/network/interfaces. I would point you to the howto for detail, however I can't remember where the right one is off hand. Look at linuxdoc.org and debian.org/doc/ At 02:17 PM 26/11/00, Joseph Anthony wrote: debian-user@lists.debian.org
Re: Using putty for an X session
At 01:56 AM 23/11/00, you wrote: It doesn't have to support X, just port forwarding. The user will have to supply appropriate xhost and xauth authorization values. Well Putty doesn't support that either :-) SSH port forwarding and X forwarding. Better solution IMO would be VNC. Where is this other box, and if remote, why can't you just run terminal access to it?
Re: OT?: How to enable my Linux network for W98 machines?
At 09:13 AM 22/11/00 +0100, you wrote: Hello, Does someone have a hint on how to set up W98 machines to work in my (small) Linux (eth-based, 100Mbps) network. One Linux box is used as a gateway, the others have their traffic routed using ipchains. Setting up the ipchains rule and the gateway entry in the othe boxes Linux is sufficient. DNS addresses are given in resolv.conf. 1. Which are the corresponding steps in W98? In the TCP/IP properties in windows set your IP and Subnet Mask. Gateway is the IP of your Linux box. Under DNS configuration you need to put the DNS IPs of your ISP (which should be in resolv.conf) Here is a link from a the HOW-TO http://www.linuxdoc.org/HOWTO/IP-Masquerade-HOWTO-4.html#ss4.1 2. Giving the IP address, gateway address and the host identity of the IP network driver entries for the W98 box I have been able to ftp to the linux box(es). Which steps are necessary to connect to the Internet via the gateway, from W98. Do I have to install bind for DNS services via named? Not if you use your ISPs DNS servers 3. Since I can ftp to my Linux boxes, if the service was enabled I could log in to Linux from W98, using eg telnet, right? Is it possible to do the reverse, i.e. login to the W98 box(es) from Linux box(es), for example to use remote control tools? Are there any open source versions of such tools (not netbus/backorifice?) and SSH servers/clients available? If you have a telnet server running, yes. I have never found a free telnet server for windows that I liked. If anyone knows of one I would love to know. As for a telnet/ssh client for windows, I like putty. http://www.chiark.greenend.org.uk/~sgtatham/putty/ 4. For file and printer sharing do I have to install Samba? I don't know of another way, although I'm not very experienced. However I found samba extremely easy to setup. 5. How to enable automatic dial up for pppd, when traffic is present on the other machines? A dial-up ISDN connection is used for this. I have tried diald but did not like it (too long tineouts before releasing the connection). I have a direct connection so I don't know much about dial on demand. 6. Anything else to think of? Other than reading the HOW-TO linked above and its recommended reads I don't know of anything else. Steven
HDs at boot up
I have a error come up while the kernel is booting, although it doesn't affect the machine it makes the kernel loading take much longer than it should. I am running woody and I have one HD (hda) its an IDE. During boot up I get the following ide1: SIS5513 Bus-Master DMA disabled (BIOS) hda: WDC AC21200H, ATA DISK drive hdc: no response (status = 0xa1), resetting drive hdc: no response (status = 0xa1) hdd: no response (status = 0xa1), resetting drive hdd: no response (status = 0xa1) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: WDC AC21200H, 1222MB w/128kb Cache, CHS=621/64/63 It then goes on to probe the floppy drive, then look for scsi (none) and on to the partitions. I have no hdc and hdd however its probing for them, why? This takes a fair bit of time since there are no HDs there and I have never seen this before (although I don't have much experience :-) One last thing my HD has that might be causing a problem is that is has EZ-BIOS from Maxtor installed (this loads before lilo). Its not something I need, however I can't get rid of it. It was installed long ago when this machine had another HD and needed EZ-BIOS to recognize the 10GB HD. I removed the Maxtor HD awhile ago, however EZ-BIOS won't uninstall because it can no longer find a Maxtor HD attached to the computer. Considering the effort to get a Maxtor HD attached, I have just left it there. Thank you, Steven
Re: Using putty for an X session
Unless I am reading the putty wishlist wrong, putty doesn't support X in its current form http://www.chiark.greenend.org.uk/~sgtatham/putty/wishlist.html Unix/X (need a local-xterm back end) At 02:08 PM 22/11/00, you wrote: Unfortunately at work I must use a windows machine, but Id like to be able to use Putty to connect to my machine. I can bring up a standard SSH2 session but I am ignorant when it come to starting an X session remotely. How do I go about getting X on my machine at work? I know it has to do with starting X on a new display. Should I use startx -display ?? and if so what is that display. Thanks Adam Edgar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: dselect
I am sure you will get several replys like this, however as a Debian newbie aswell I find console-apt (capt) to be extremely easy to use and I can always find what I need. apt-get install console-apt to install it and capt to run it. Never truely got the hang of dselect either :-)
Re: Telent
You cannot use root to login with telnet. Its disabled by default for security reasons. At 11:28 PM 22/11/00, you wrote: I have a question. Is there some configuration that I need to make in order to telnet in to my Linux box. I have a static ip, and i can log on locally. I have the gateway configured. I get the log in thru telnet and enter root and then password. Everytime I get incorrect login I know this is not correct because i can log in locally. Can i use root to log in? I very new to Linux and Debian and need some advice. Thanks in advance Jeff D