Re: USB CD-RW Drives
on Sat, Aug 09, 2003, Jerry ([EMAIL PROTECTED]) wrote: I have two usb cd-rw drives connected to my computer. I recently had to reinstall Woody 3.0r0. Now, Woody cannot see these drives. In my previous install they were scd0 scd1. Now, when I run sg_map -i these drives do not show up. In modconf I can see that I have sg installed, and I have usbcore installed. Here is the modules contents of my /etc/modules file: usb-uhci usb-ohci You should only need one of these modules in most normal scenarios; unless you have added USB ports to your system via a PCI card, for example. Most people with Intel or VIA chipsets require the usb-uhci module. However, using both *shouldn't* cause a problem; the superfluous one *should* just generate errors at load time. I'd get rid of it just to be sure. input usbkbd keybdev lp radeon mousedev ide-scsi You've recompiled to enable IDE-SCSI support, but did you remember to disable IDE CDROM support? Not doing so will hide the drives from the SCSI subsystem. Hope this helps, Peter. pgp0.pgp Description: PGP signature
USB CD-RW Drives
I have two usb cd-rw drives connected to my computer. I recently had to reinstall Woody 3.0r0. Now, Woody cannot see these drives. In my previous install they were scd0 scd1. Now, when I run sg_map -i these drives do not show up. In modconf I can see that I have sg installed, and I have usbcore installed. Here is the modules contents of my /etc/modules file: usb-uhci usb-ohci input usbkbd keybdev lp radeon mousedev ide-scsi imm sg es1371 printer usbmouse usb-storage radeonfb msdos cpuid msr What else do I need to do to get Woody to see these usb drives? TIA, Jerry -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: CD-RW drives and Linux
On Sun, Jul 04, 1999 at 05:07:47PM -0400, Alec Smith wrote: The cheapest option would be the IDE/IDE combo. Would an IDE CD-RW be easily used in Debian? Also, which drives are recommended? I'm more interested in burning CD-R discs than the ReWrite capabilities. With the right kernel options, as mentioned before, an IDE CD-RW works perfectly. I have a IDE/IDE setup with an a-open cd reader and a Philips 3610 writer. No problems at all, except 2speed writing is nog so fast. The ideal setup depends on what your intentions are. For copying audio cd's, I think scsi might be better if you want to copy audio cd's on the fly, but that might not be so important... As cdrw discs are now only twice as expensive as cdr discs, I think the cdrw option is very useful. I use it for backups, for example. I'm working on a script for creating (compilation) audio cd's. By now it sort of works (a whole lot better than the windows software that was shipped with my Philips drive, but that's not too hard :-) I'll try to put it on the web this week and I'll post a link. Wouter
Re: CD-RW drives and Linux (IDE/IDE quirks)
On Wed, Jul 07, 1999 at 12:28:59PM +0200, Wouter Hanegraaff wrote: On Sun, Jul 04, 1999 at 05:07:47PM -0400, Alec Smith wrote: The cheapest option would be the IDE/IDE combo. Would an IDE CD-RW be easily used in Debian? Also, which drives are recommended? I'm more interested in burning CD-R discs than the ReWrite capabilities. With the right kernel options, as mentioned before, an IDE CD-RW works perfectly. I have a IDE/IDE setup with an a-open cd reader and a Philips 3610 writer. No problems at all, except 2speed writing is nog so fast. One problem I've run into with this setup is that certain operations (blanking CDRWs, fixating CDR or CDRW) would cause the reader (or anything else on the same controller to be come unavailable until the operation was complete. It took me quite a while to notice the problem because actually writing to the CDR didn't cause any problem and I never had problems copying CDs etc. I was under the impression that this was an issue with the Linux SCSI support (and thus IDE-SCSI as well). Has anyone else seen this sort of problem? -- Ray
Re: CD-RW drives and Linux
I have the Panasonic CW-7502 SCSI CDROM drive, with an AMD K6-2 350 and 128Mb of PC100 memory. I have compiled the kernel, watch updatedb start running in the middle of a burn and compiled the Mercury compiler (much more memory, cpu and disk intensive then the kernel) during CD burns without any hitches. I do remember that on my old Cyrix P200 system with a TEAC CD-Writer, that it didn't like reading straight from the IDE CD-ROM to burn onto the SCSI CD-Writer. Since I use my CD-W as my only CD ROM now, I can't confirm if that is still true. Pete.
Re: CD-RW drives and Linux
On Sun, Jul 04, 1999 at 05:52:47PM -0400, Alec Smith wrote: I'm looking into getting a CD-RW drive to go along with my Debian system. I'm looking at the following possible combinations. 1. SCSI CD-ROM and SCSI CD-RW I'd go for this. I'm really regretting going IDE/IDE (Creative x32 CD-ROM and HP 8100i CD-RW) - the IDE CD-ROM drive is useless, really, and the CD-RW takes a lot of CPU time. Would an IDE CD-RW be easily used in Debian? My HP 8100i works well. Or it did until I forgot which kernel options to use. -- alisdair mcdiarmid [EMAIL PROTECTED] [your home may be at risk if you do not keep up repayments on your loan. any and all advice given is strictly confidential]
Re: CD-RW drives and Linux
On Sun, Jul 04, 1999 at 05:52:47PM -0400, Alec Smith wrote: I'm looking into getting a CD-RW drive to go along with my Debian system. I'm looking at the following possible combinations. 1. SCSI CD-ROM and SCSI CD-RW 2. IDE CD-ROM and SCSI CD-RW 3. SCSI CD-ROM and IDE CD-RW 4. IDE CD-ROM and IDE CD-RW The cheapest option would be the IDE/IDE combo. Would an IDE CD-RW be easily used in Debian? Also, which drives are recommended? I'm more interested in burning CD-R discs than the ReWrite capabilities. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null I've got an HP 8100i and another Creative Labs CD-ROM and it works great! I've had better burning experiences in Linux than in Windows; windows has given me several golden frisbies. The xcdroast program provides a nice, clean interface to burn CDs. -- Stephen Pitts [EMAIL PROTECTED] webmaster - http://www.mschess.org
Re: CD-RW drives and Linux
I am doing the IDE/IDE thing. If you already have a SCSI controller, you could go for that. I have had no problems; just compile SCSI-IDE emulation support into the kernel so that both your IDE cdroms will speak scsi. Somebody mentioned CPU usage. I don't see why this should matter, I don't touch my system while it is burning. It is not suggested to do any IDE intensive use such as extracting and compiling a kernel. Is SCSI all that much faster for burning? I have a 40x CD-ROM and a HP 7200i CD-RW. On 05-Jul-99 Stephen Pitts wrote: On Sun, Jul 04, 1999 at 05:52:47PM -0400, Alec Smith wrote: I'm looking into getting a CD-RW drive to go along with my Debian system. I'm looking at the following possible combinations. 1. SCSI CD-ROM and SCSI CD-RW 2. IDE CD-ROM and SCSI CD-RW 3. SCSI CD-ROM and IDE CD-RW 4. IDE CD-ROM and IDE CD-RW The cheapest option would be the IDE/IDE combo. Would an IDE CD-RW be easily used in Debian? Also, which drives are recommended? I'm more interested in burning CD-R discs than the ReWrite capabilities. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null I've got an HP 8100i and another Creative Labs CD-ROM and it works great! I've had better burning experiences in Linux than in Windows; windows has given me several golden frisbies. The xcdroast program provides a nice, clean interface to burn CDs. -- Stephen Pitts [EMAIL PROTECTED] webmaster - http://www.mschess.org -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null - | Wim Kerkhoff | | [EMAIL PROTECTED] | | www.canadianhomes.net/wim | -
Re: CD-RW drives and Linux
On Sun, 4 Jul 1999, Alec Smith wrote: I'm looking into getting a CD-RW drive to go along with my Debian system. I'm looking at the following possible combinations. 1. SCSI CD-ROM and SCSI CD-RW 2. IDE CD-ROM and SCSI CD-RW 3. SCSI CD-ROM and IDE CD-RW 4. IDE CD-ROM and IDE CD-RW The cheapest option would be the IDE/IDE combo. Would an IDE CD-RW be easily used in Debian? Also, which drives are recommended? I'm more interested in burning CD-R discs than the ReWrite capabilities. I recently bought a Ricoh MP7040A which is supported by cdrecord 1.8a22 and I am very happy with it. I had no problems so far. It is faster than th HP7200 which I also tried out some time ago. A friend of mine who had a HP7200 also bought himself a Ricoh MP7040A and he said it is an improvement on the HP7200. Johann -- | Johann Spies Windsorlaan 19 | | [EMAIL PROTECTED]3201 Pietermaritzburg | | Tel/Faks Nr. +27 331-46-1310 Suid-Afrika (South Africa) | -- But Jesus said, Let the little children come to me, and do not hinder them, for the kingdom of heaven belongs to such as these. Matthew 19:14
CD-RW drives and Linux
I'm looking into getting a CD-RW drive to go along with my Debian system. I'm looking at the following possible combinations. 1. SCSI CD-ROM and SCSI CD-RW 2. IDE CD-ROM and SCSI CD-RW 3. SCSI CD-ROM and IDE CD-RW 4. IDE CD-ROM and IDE CD-RW The cheapest option would be the IDE/IDE combo. Would an IDE CD-RW be easily used in Debian? Also, which drives are recommended? I'm more interested in burning CD-R discs than the ReWrite capabilities.
CD-RW drives
Does anyone know if recent Linux kernel versions support CD-RW drives, such as the HP 7110I? Martin Jackson: [EMAIL PROTECTED] === Information Science Major Mankato State University === -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .