RE: Compact FLASH problems

2000-10-17 Thread Sean 'Shaleh' Perry 
not actually an answer, but, there is a debian-laptop list.  I suspect people
there may be able to help.

Compact FLASH problems

2000-10-17 Thread Brian Dockter 
Please forgive me if this is a duplicate. I couldn't find my original
post anywhere, so I'm sending it again.

I'm having trouble getting my PCMCIA adapter working. Here's a brief
system description:

 Debian v2.2 with 2.2.17-idepci kernel
 Dell 450MHz PIII
 Actiontec PCMCIA adapter (TI PCI1225 chip on a PCI card)
 IDE harddriver on IDE bus 0
 CD-ROM & ZIP on IDE bus 1

When I plug in my Compact FLASH card into my PCMCIA adapter, I get the
following messages on the console:

 hde: SST48CF064C-B6 CompactFlash Memory Card, ATA DISK drive
 ide2 at 0x100-0x107,0x10e on irq 3
  hde:hde: lost interrupt
 hde: lost interrupt
 hde: lost interrupt
 hde: lost interrupt
  hde1 hde2
  hde:hde: lost interrupt
 hde: lost interrupt
  hde1 hde2
 hde: lost interrupt
 hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
 hde: drive_cmd: error=0x04 { DriveStatusError }

If I try to mount the memory card, it takes several minutes (and lots of
"lost interrupt" messages) but will eventually mount. Also, any read/write
I do to the card prints out more "lost interrupt" messages.

Does anyone have any ideas what might be the problem and how I could fix
it?

Thanks for the help,


Brian

--
Brian Dockter| Email: [EMAIL PROTECTED]
Sr. Member Technical Staff   | Voice: 425-771-2400
Sony Electronics, Seattle| FAX:   425-771-2066

Compact FLASH problems

2000-10-12 Thread Brian Dockter 
I'm having trouble getting my PCMCIA adapter working. Here's a brief
system description:

 Debian v2.2 with 2.2.17-idepci kernel
 Dell 450MHz PIII
 Actiontec PCMCIA adapter (TI PCI1225 chip on a PCI card)
 IDE harddriver on IDE bus 0
 CD-ROM & ZIP on IDE bus 1

When I plug in my Compact FLASH card into my PCMCIA adapter, I get the
following messages on the console:

 hde: SST48CF064C-B6 CompactFlash Memory Card, ATA DISK drive
 ide2 at 0x100-0x107,0x10e on irq 3
  hde:hde: lost interrupt
 hde: lost interrupt
 hde: lost interrupt
 hde: lost interrupt
  hde1 hde2
  hde:hde: lost interrupt
 hde: lost interrupt
  hde1 hde2
 hde: lost interrupt
 hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
 hde: drive_cmd: error=0x04 { DriveStatusError }

If I try to mount the memory card, it takes several minutes (and lots of
"lost interrupt" messages) but will eventually mount. Also, any read/write
I do to the card prints out more "lost interrupt" messages.

Does anyone have any ideas what might be the problem and how I could fix
it?

Thanks for the help,


Brian

--
Brian Dockter| Email: [EMAIL PROTECTED]
Sr. Member Technical Staff   | Voice: 425-771-2400
Sony Electronics, Seattle| FAX:   425-771-2066