It seems you NE2000 is not configured, because you are using module.
Add in you '/etc/modules' one line :
ne
to say kerneld to load module ne at boot time
and add in your /etc/conf.modules something like :
ne irq=10 io=0x300
to give parameters to module ne, because MODULE ne can't autoprobe
its parameters
OR
include ne in your kernel ( you have to recompile all your kernel)
Hello folks...I've got a CD-ROM from IConnect, made ~ the first of July.
It seems to install just fine, but when it reboots, the network doesn't
start up. I've got a NE2000 card, and I think that I configured
everything okay...it works fine when I install from my old .93r6 cd, for
instance. During bootup, it reads off a bunch of messages ( SIG* failed:
device does not exist, that sort of thing...I'll get the exact errors if
anyone asks.) Does anyone know what's going on here? I had the exact
same problem when I first got the CD and tried to install it on another
machine, with an HP lancard, so I'm thinking that it's probably a problem
with the distribution. I've installed the updated netbase.deb from
buzz-fixed, but the problem persists. Argh, I don't want to have to run
.93r6!!! Thanks in advance for any help..
---
Allan Anderson -- [EMAIL PROTECTED]
--
This message was delayed because the list mail delivery agent was down.
--
Spineux Alain
==
Spineux Alain E-MAIL : [EMAIL PROTECTED]
INSTITUT STEVIN
Catholic University of LouvainFAX: 32-10-472501
PLACE DU LEVANT 2 PHONE : 32-10-472516
B-1348 LOUVAIN-LA-NEUVE (BELGIUM)
===
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
