Hi to all,
The problem was that the /etc/pcmcia/wlan-ng.conf file link the MA401RA card
to the prism2_cs module, while it should be to the orinico_cs module. The
only thing I had to do to make it work is to replace the following lines:
card NETGEAR MA401RA 11Mbps 802.11 WLAN Card
version NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA
bind prims2_cs
by these ones:
card NETGEAR MA401RA 11Mbps 802.11 WLAN Card
version NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA
bind orinoco_cs
I'll fill a bvug report against the linux-wlan-ng package to which belongs
the /etc/pcmcia/wlan-ng.conf file.
.
-- Message transmis --
Subject: PCMCIA Netgear MA401RA not working anymore after Sid dist-upgrade
Date: 22 Octobre 2005 11:37
From: Marco Laverdière [EMAIL PROTECTED]
To: debian-user@lists.debian.org
Hi to all,
Well I guess the subject if this message says it all: I was running happily
my wireless PCMCIA Netgear MA401RA card since 3 years on my Debian
Sid/2.6.5/Sony Vaio PCG-K13Q laptop when suddenly, it stopped working just
after I did a dist-upgrade yesterday (October 21). Before, when I was
inserting the card, I had a deep deep sound and right after, I was up and
running with my wireless connection. Now, I get a deep doop sound, and no
connection. However, the card seems to still be recognized: doing a
cardctl ident at root gives me this:
Socket 0:
product info: NETGEAR MA401RA Wireless PC, Card, ISL37300P,
Eval-RevA
manfid: 0x000b, 0x7300
function: 6 (network)
Here's some more info:
- pcmcia-cs, linux-wlan-ng and wireless-tools packages ared installed;
-pcmcia_core, orinoco_cs, orinoco, ds, yenta-socket and modules are loaded
at boot, by way of /etc/modules;
-in /etc/pcmcia/config file, I can find the following lines:
card Netgear MA401RA Wireless Adapter
version NETGEAR MA401RA Wireless PC, Card
bind orinoco_cs
Also, I can get a wireless network connection with the built-in (but less
reliable and more slower) Atheros Madwifi card.
When I did the dist-upgrade, I observed that the hotplug package had to be
removed, because of incompatiblity with udev and hal packages. I tried to
reinstalled hotplug, but without results.
I'm a little bit clueless right now...
Someone can help me solving this.
Thanks.
--
Marco Laverdière
---
--
Marco Laverdière
