Re: PS/2 mouse problems with kernel 2.4.x

2001-10-07 Thread Michael Heldebrant
On Sat, 2001-10-06 at 21:14, Torsten Kersting wrote:
 Hi all, 
 im running woody/sid and did an update yesterday, since then I cant get
 my mouse to work with a 2.4.x kernel anymore.  Its a PS/2 mouse that works 
 fine with kernel 2.2.19 (console and X) but with a 2.4.x kernel I cant 
 start gpm (no error message but ps ax shows no gpm process, oops in syslog 
 see below) nor can I use the mouse in X without gpm, which worked before 
 by changing /dev/gpmdata to /dev/psaux in /etc/X11/XF86Config-4. 
 cat /dev/psaux gives me device not found although I created it new
 using mknod /dev/psaux c 10 1 (and works with 2.2.19). The PS/2 port
 doesnt get recognized by the 2.4.x kernel (tried 2.4.8, 2.4.9 and
 2.4.10) although psaux support is enabled (.config see below). I 
 downgraded gpm to the potato version but that didnt change anything.
 Excerpts from the relevant files:
 
 XF86Config-4:
 Section InputDevice
   Identifier  Mouse0
   Driver  mouse
   Option  Protocol PS/2
   Option  Device /dev/gpmdata
 EndSection
 
 
 
 /etc/gpm.conf:
 device=/dev/psaux
 responsiveness=
 repeat_type=raw
 type=ps2
 append=
 sample_rate=
 
 /proc/interrupts 2.2.19:
CPU0   
   0:  14127  XT-PIC  timer
   1:346  XT-PIC  keyboard
   2:  0  XT-PIC  cascade
   8:  1  XT-PIC  rtc
   9:   4060  XT-PIC  aic7xxx, eth0
  12:205  XT-PIC  PS/2 Mouse
  13:  1  XT-PIC  fpu
 NMI:  0
 ERR:  0
 
 /proc/interrupts 2.4.10:
CPU0   
   0: 192839  XT-PIC  timer
   1:  12475  XT-PIC  keyboard
   2:  0  XT-PIC  cascade
   5:  2  XT-PIC  soundblaster
   9:   9469  XT-PIC  aic7xxx, eth0
 NMI:  0 
 ERR:  0
 
 /proc/misc 2.2.19:
 135 rtc
   1 psaux
 
 /proc/misc 2.4.10:
 175 agpgart
 134 apm_bios
 
 from /var/log/syslog 2.2.19:
 Oct  7 02:58:27 kaleunpc kernel: Detected PS/2 Mouse Port.
 
 from /var/log/syslog 2.4.10:
 Oct  7 02:12:36 kaleunpc /usr/sbin/gpm[183]: oops() invoked from gpm.c(972)
 Oct  7 02:12:36 kaleunpc /usr/sbin/gpm[183]: /dev/psaux: No such device
 
 ls -la /dev/psaux
 crw-r--r--1 root root  10,   1 Oct  7 02:18 /dev/psaux
 
 ls -la /dev/mouse
 lrwxrwxrwx1 root root7 Oct  7 02:50 /dev/mouse - gpmdata
 
 /usr/src/linux/.config:
 # Mice
 #
 # CONFIG_BUSMOUSE is not set
 CONFIG_MOUSE=y
 CONFIG_PSMOUSE=m
 # CONFIG_82C710_MOUSE is not set
 # CONFIG_PC110_PAD is not set

I'll bet that psaux isn't loaded as a module right now.  Try adding
psaux to your /etc/modules file for your next reboot and modprobe psaux
right now.  This leaps out for two reasons, psaux is not listed as a
misc device in 2.4 and you have it compiled as a module.  Let the list
know if this solves it or you need more help.

--mike



Solved- Re: PS/2 mouse problems with kernel 2.4.x

2001-10-07 Thread Torsten Kersting
Hi all,
On Sun, Oct 07, 2001 at 01:11:45PM -0500 , Michael Heldebrant [EMAIL 
PROTECTED] wrote:
 On Sat, 2001-10-06 at 21:14, Torsten Kersting wrote:
  im running woody/sid and did an update yesterday, since then I cant get
  my mouse to work with a 2.4.x kernel anymore.  Its a PS/2 mouse that works 

[...]

  /usr/src/linux/.config:
  # Mice
  #
  # CONFIG_BUSMOUSE is not set
  CONFIG_MOUSE=y
  CONFIG_PSMOUSE=m
   ^
This seemed to be the cause of my problem.

 I'll bet that psaux isn't loaded as a module right now.  Try adding
 psaux to your /etc/modules file for your next reboot and modprobe psaux
 right now.  This leaps out for two reasons, psaux is not listed as a
 misc device in 2.4 and you have it compiled as a module.  Let the list
 know if this solves it or you need more help.
 
Thanks a lot for pointing me in the right direction. I should have 
mentioned, that i did not only update the distro but the kernel as 
well, only this time giving make-kpkg --config=menuconfig 
--revision=custom.1.0 kernel_image a try instead of using make 
menuconfig make dep clean bzImage etc. like i used to. Although I am 
absolutly sure that i marked Mouse Support as well as PS/2 mouse support 
in menuconfig with a * (Im sure because I allways do) it ended up as:
CONFIG_MOUSE=y
CONFIG_PSMOUSE=m
in my .config,  and no psaux module was build (i should have noticed this
when posting it but maybe at around 3 or 4am i dont notice too much 
anymore ;-) ). Manually setting CONFIG_PSMOUSE=y and recompiling solved 
the problem. 
Weird thing is, that i reproduced this on my laptop with the same results. 
.config using make menuconfig:
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
.config using make-kpkg --config=menuconfig:
CONFIG_MOUSE=y
CONFIG_PSMOUSE=m
both times selecting Mouse Support and PS/2 mouse support with a *.

Cheers,
Torsten
-- 
pub  1024D/46B588A9 2001-03-12 Torsten Kersting [EMAIL PROTECTED]
 Key fingerprint = 5869 11F0 1546 FDC4 82F2  E33F C692 C1CF 46B5 88A9
PGP Key available at http://www.hqpm.net/kersting/pgp/pgpkey



PS/2 mouse problems with kernel 2.4.x

2001-10-06 Thread Torsten Kersting
Hi all, 
im running woody/sid and did an update yesterday, since then I cant get
my mouse to work with a 2.4.x kernel anymore.  Its a PS/2 mouse that works 
fine with kernel 2.2.19 (console and X) but with a 2.4.x kernel I cant 
start gpm (no error message but ps ax shows no gpm process, oops in syslog 
see below) nor can I use the mouse in X without gpm, which worked before 
by changing /dev/gpmdata to /dev/psaux in /etc/X11/XF86Config-4. 
cat /dev/psaux gives me device not found although I created it new
using mknod /dev/psaux c 10 1 (and works with 2.2.19). The PS/2 port
doesnt get recognized by the 2.4.x kernel (tried 2.4.8, 2.4.9 and
2.4.10) although psaux support is enabled (.config see below). I 
downgraded gpm to the potato version but that didnt change anything.
Excerpts from the relevant files:

XF86Config-4:
Section InputDevice
Identifier  Mouse0
Driver  mouse
Option  Protocol PS/2
Option  Device /dev/gpmdata
EndSection



/etc/gpm.conf:
device=/dev/psaux
responsiveness=
repeat_type=raw
type=ps2
append=
sample_rate=

/proc/interrupts 2.2.19:
   CPU0   
  0:  14127  XT-PIC  timer
  1:346  XT-PIC  keyboard
  2:  0  XT-PIC  cascade
  8:  1  XT-PIC  rtc
  9:   4060  XT-PIC  aic7xxx, eth0
 12:205  XT-PIC  PS/2 Mouse
 13:  1  XT-PIC  fpu
NMI:  0
ERR:  0

/proc/interrupts 2.4.10:
   CPU0   
  0: 192839  XT-PIC  timer
  1:  12475  XT-PIC  keyboard
  2:  0  XT-PIC  cascade
  5:  2  XT-PIC  soundblaster
  9:   9469  XT-PIC  aic7xxx, eth0
NMI:  0 
ERR:  0

/proc/misc 2.2.19:
135 rtc
  1 psaux

/proc/misc 2.4.10:
175 agpgart
134 apm_bios

from /var/log/syslog 2.2.19:
Oct  7 02:58:27 kaleunpc kernel: Detected PS/2 Mouse Port.

from /var/log/syslog 2.4.10:
Oct  7 02:12:36 kaleunpc /usr/sbin/gpm[183]: oops() invoked from gpm.c(972)
Oct  7 02:12:36 kaleunpc /usr/sbin/gpm[183]: /dev/psaux: No such device

ls -la /dev/psaux
crw-r--r--1 root root  10,   1 Oct  7 02:18 /dev/psaux

ls -la /dev/mouse
lrwxrwxrwx1 root root7 Oct  7 02:50 /dev/mouse - gpmdata

/usr/src/linux/.config:
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=m
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set


Im getting really desperated on this one, so any help would be greatly
appreciated.

Cheers
Torsten
-- 
pub  1024D/46B588A9 2001-03-12 Torsten Kersting [EMAIL PROTECTED]
 Key fingerprint = 5869 11F0 1546 FDC4 82F2  E33F C692 C1CF 46B5 88A9
PGP Key available at http://www.hqpm.net/kersting/pgp/pgpkey