Re: Squeeze update hplip
On 07/02/2012 09:40 PM, Mark Panen wrote: Hi, My HP multi function printer prints fine but xsane opens with an error no devices found hplip 3.10.6-2+squeeze1 is installed, i need 3.11 How can i get the 3.11 package, tried wheezy sources but dependency nightmare. Nothing in backports. Afraid to try HP's way on there web site as i have already installed cups etc. I don't know enough about your configuration to do more than make a suggestion that might not be on target for you. I have found that installing HP multi-function printers through CUPS only makes the printer work. To get printing / scanning / faxing to work one always (?) has to use the hp-setup program. It has to be run as root, and you'll need to read the man page on it. I'm pretty sure it's installed with hplip so it should already be on your system. If you try it you'll want to use its interactive mode. I notice that just about every time CUPS is upgraded, it breaks my scanning. I just use the CUPS admin page to remove the printer then run hp-setup again, and xsane and the printer start working again. If I'm barking up the wrong tree, just ignore me. Good fortune to you! the worrier -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ff2e2de.7090...@comcast.net
Re: Squeeze update hplip
On 03/07/2012 14:17, Worrier Poet wrote: use the hp-setup program. It has to be run as root I cannot open any GUI packages as root in a terminal, something about X forwarding, can you help me please? -- Cheers Mark -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ff2f5c4.1030...@gmail.com
Re: Squeeze update hplip
On 07/03/2012 09:38 AM, Mark Panen wrote: On 03/07/2012 14:17, Worrier Poet wrote: use the hp-setup program. It has to be run as root I cannot open any GUI packages as root in a terminal, something about X forwarding, can you help me please? It will probably help those of us who are trying to help you if you give us more information about the system or systems you are working on. We know you're running Squeeze, and that you are thinking that you may need a later version of hplip (which I think may not be true because I used MFPs easily on Squeeze), and want to get a multi-function HP device to work. I had assumed that your printer was attached directly to the system you're working from, or perhaps that the printer was directly plugged in as a client of the network. From what you've said now, it sounds as though you have the printer attached to a remote Linux system. And that you're trying to run hp-setup on that remote system. Is that correct? The more exact information about the printer/scanner and the systems it needs to serve, the more likely we may be able to help you. I'm a bit confused about your statement that you can't open any GUI packages as root in a terminal. If you're trying to run it on a remote system by way of an SSH connection, then normally it is best to not allow running GUI packages on the remote system as root. That would be IMO a proper setup. In the face of a real need to run a GUI app as an admin on a remote system, I'd probably use gksu (or equivalent) to launch the GUI app from the standard $ prompt (i.e. not logged on to the terminal as root). But all my experience with hp-setup indicates that it works best as an interactive command line utility. I had forgot that there's some sort of gtk (or gnome?) thingy that can be used to control it, but I've never used that after once looking at it and deciding that it wasn't very useful. An example for getting hp-setup as an interactive command line utility to install an HP MFP connected directly to a router on my home network would be # hp-setup -i xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx is the IP address of the MFP. If you don't use the -i option, then hp-setup will assume you want to use the GUI. If you do use the -i option, then I think the remote system should be happy to let you use the utility. There are examples in the man page to indicate what you need to do if the printer is attached by serial / parallel / usb to the remote system. If I haven't understood your circumstances at all, then you should probably really spell out what you have, how it is currently configured (physically as well as software-wise) and just what you want to accomplish. I hope someone will be able to assist you. I may be tied up for a couple of days, but will try to get back to the thread as soon as possible. Good fortune to you! the worrier -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ff3014f.5050...@comcast.net
Re: Squeeze update hplip
On Tue, 03 Jul 2012 03:40:12 +0200, Mark Panen wrote: My HP multi function printer prints fine but xsane opens with an error no devices found Brand and model of your multifunction device? Also, ensure your user in on lp group (run groups). hplip 3.10.6-2+squeeze1 is installed, i need 3.11 Why you need version 3.11 specifcally? :-? How can i get the 3.11 package, tried wheezy sources but dependency nightmare. Nothing in backports. Afraid to try HP's way on there web site as i have already installed cups etc. There are detailed instructions here: http://hplipopensource.com/hplip-web/install/manual/distros/debian.html A manual install should not interefere with your CUPS package but before installing something outside Debian repos, consider if you really (I mean *really*) need it :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/jsv0hi$q1u$1...@dough.gmane.org
Re: Squeeze update hplip
On Tue, Jul 03, 2012 at 03:40:12AM +0200, Mark Panen wrote: Hi, My HP multi function printer prints fine but xsane opens with an error no devices found hplip 3.10.6-2+squeeze1 is installed, i need 3.11 How can i get the 3.11 package, tried wheezy sources but dependency nightmare. Why not upgrade to wheezy? It will be the next stable soon anyway. -- If you're not careful, the newspapers will have you hating the people who are being oppressed, and loving the people who are doing the oppressing. --- Malcolm X -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120703055200.GA22633@tal