RE: Text copy/paste feature not working for me
Hi Kent, It turned out I wasn't running gpm, and using Section Pointer Protocol microsoft Device /dev/ttyS0 EndSection in XF86Config fixed the problem, as my Logitech serial mouse is MS mouse compatible. During installation I'd selected the only driver for a Logitech mouse and it wasn't fully compatible with my model, apparently. Copy/paste works now! Thanks, Kris -Original Message- From: westk [mailto:[EMAIL PROTECTED] Sent: Friday, October 19, 2001 7:26 PM To: debian-user; Kris Huber Subject: RE: Text copy/paste feature not working for me = Original Message From Kris Huber [EMAIL PROTECTED] = I did an install of the potato kernel and selected packages. I chose enlightenment and gnome under X11, which I've used before under kernel 2.4. A feature I use quite a bit, hi-lighting text with left mouse button, then middle-clicking to produce a copy of that text, is not working. I'm not sure just where to look for that feature. My suspicion is that my middle mouse button is not working. I have a serial mouse from Logitech and I selected a Logitech mouse driver during the install. For 3-button emulation I selected 'no' because it has 3 buttons and shouldn't need emulation. Under 2.4 a more generic mouse driver was used, I think. I'm quite new to installation issues. How do I try a different mouse driver? Thanks for any clue, Kris DISCLAIMER: I may be completely wrong. There are generally two types of mouse driver; one, gpm, is for the text (non-X) console; the other is the X mouse driver. These two interact, so the answer to your question will depend on if you're running gpm or not. To find out, run the command ps ax|grep gpm. If you're running gpm, you'll see something like: infotech-02[westk]:/home/westk ps ax|grep gpm 181 ?S 0:01 /usr/sbin/gpm -m /dev/psaux -t ps2 -Rraw 344 pts/1S 0:00 grep gpm The 181 line above tells where gpm expects to find the mouse (/dev/psaux), what type of driver it's using (-t ps2 = ps/2 type), and what type, if any, repeating it's doing (raw). If you're not running gpm, you should only see the grep gpm line of the above output. Another and more direct method of seeing if you're running gpm is to simply Ctrl-Alt-F1 to a non-X virtual console (you can get back to X in most cases with Alt-F7), and simply move the mouse. If you're running gpm, you should see a block-shaped mouse cursor moving around. If it moves erratically, that means that gpm has the wrong settings. gpm (by default on Debian systems) keeps its config info in /etc/gpm.conf. You can edit this file manually by hand, and then restart the gpm daemon (run /etc/init.d/gpm restart), or you can run the gpm configuration utility which is probably a tad easier for newbies (gpmconfig). X keeps its mouse settings in /etc/X11/XF86Config or /etc/X11/XF86Config-4. The settings are similar, but not quite the same, as those for gpm. Let us know the contents of /etc/gpm.conf and the mouse settings of /etc/X11/XF86Config[-4], and then we'll know better how to answer your question. Kent
Text copy/paste feature not working for me
I did an install of the potato kernel and selected packages. I chose enlightenment and gnome under X11, which I've used before under kernel 2.4. A feature I use quite a bit, hi-lighting text with left mouse button, then middle-clicking to produce a copy of that text, is not working. I'm not sure just where to look for that feature. My suspicion is that my middle mouse button is not working. I have a serial mouse from Logitech and I selected a Logitech mouse driver during the install. For 3-button emulation I selected 'no' because it has 3 buttons and shouldn't need emulation. Under 2.4 a more generic mouse driver was used, I think. I'm quite new to installation issues. How do I try a different mouse driver? Thanks for any clue, Kris
RE: Text copy/paste feature not working for me
= Original Message From Kris Huber [EMAIL PROTECTED] = I did an install of the potato kernel and selected packages. I chose enlightenment and gnome under X11, which I've used before under kernel 2.4. A feature I use quite a bit, hi-lighting text with left mouse button, then middle-clicking to produce a copy of that text, is not working. I'm not sure just where to look for that feature. My suspicion is that my middle mouse button is not working. I have a serial mouse from Logitech and I selected a Logitech mouse driver during the install. For 3-button emulation I selected 'no' because it has 3 buttons and shouldn't need emulation. Under 2.4 a more generic mouse driver was used, I think. I'm quite new to installation issues. How do I try a different mouse driver? Thanks for any clue, Kris DISCLAIMER: I may be completely wrong. There are generally two types of mouse driver; one, gpm, is for the text (non-X) console; the other is the X mouse driver. These two interact, so the answer to your question will depend on if you're running gpm or not. To find out, run the command ps ax|grep gpm. If you're running gpm, you'll see something like: infotech-02[westk]:/home/westk ps ax|grep gpm 181 ?S 0:01 /usr/sbin/gpm -m /dev/psaux -t ps2 -Rraw 344 pts/1S 0:00 grep gpm The 181 line above tells where gpm expects to find the mouse (/dev/psaux), what type of driver it's using (-t ps2 = ps/2 type), and what type, if any, repeating it's doing (raw). If you're not running gpm, you should only see the grep gpm line of the above output. Another and more direct method of seeing if you're running gpm is to simply Ctrl-Alt-F1 to a non-X virtual console (you can get back to X in most cases with Alt-F7), and simply move the mouse. If you're running gpm, you should see a block-shaped mouse cursor moving around. If it moves erratically, that means that gpm has the wrong settings. gpm (by default on Debian systems) keeps its config info in /etc/gpm.conf. You can edit this file manually by hand, and then restart the gpm daemon (run /etc/init.d/gpm restart), or you can run the gpm configuration utility which is probably a tad easier for newbies (gpmconfig). X keeps its mouse settings in /etc/X11/XF86Config or /etc/X11/XF86Config-4. The settings are similar, but not quite the same, as those for gpm. Let us know the contents of /etc/gpm.conf and the mouse settings of /etc/X11/XF86Config[-4], and then we'll know better how to answer your question. Kent
