Re: k3b + wodim fails to burn
#include hallo.h * Giacomo Montagner [Fri, Dec 22 2006, 03:35:12PM]: Hi! I just upgraded and have these packages installed: Package: wodim Architecture: i386 Source: cdrkit Version: 9:1.1.0-1 Package: k3b Architecture: i386 Version: 0.12.17-5 When I try to burn data-cd using k3b it fails with the following error: [BLAH BLAH BLAH...] The key to your answer is in BLAH BLAH BLAH. I suggest reading it. What seems strange to me is that I tried creating only the iso image with k3b, then burnt the cd using: dd if=/tmp/k3b_image.iso | cdrecord speed=10 dev=/dev/scd0 driveropts=BURNFREE -v - and it worked perfectly... then I discovered (amazingly enough) that cdrecord is a symlink to wodim... What about READING THE MESSAGES? How can we know what is going wrong if you hide them? Eduard. -- Sinclair: Are you telling me this is about a flower? -- Quotes from Babylon 5 -- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: k3b + wodim fails to burn
On Friday 22 December 2006 16:35, Giacomo Montagner wrote: Hi! I just upgraded and have these packages installed: Package: wodim Architecture: i386 Source: cdrkit Version: 9:1.1.0-1 Package: k3b Architecture: i386 Version: 0.12.17-5 When I try to burn data-cd using k3b it fails with the following error: === = [BLAH BLAH BLAH...] Starting to write CD/DVD at speed 10. 0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.002s timeout 200s Writing pregap for track 1 at -150 write track pad data: error after 0 bytes BFree: 1029 K BSize: 1029 K Starting new track at sector: 0 Track 01:0 of 666 MB written. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.002s timeout 200s /usr/bin/X11/wodim: A write error occured. /usr/bin/X11/wodim: Please properly read the error message above. write track data: error after 0 bytes Writing time: 38.150s Average write speed 119.4x. Fixating... Fixating time:0.004s cdrecord command: --- /usr/bin/X11/wodim -v gracetime=2 dev=1,0,0 speed=10 -dao driveropts=burnfree -eject -overburn -data -tsize=341118s - mkisofs --- Warning: creating filesystem that does not conform to ISO-9660. Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS. Warning: creating filesystem that does not conform to ISO-9660. Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS. 341118 Warning: creating filesystem that does not conform to ISO-9660. Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS. I: -input-charset not specified, using utf-8 (detected in locale settings) 0.15% done, estimate finish Fri Dec 22 15:27:27 2006 0.29% done, estimate finish Fri Dec 22 15:21:53 2006 0.44% done, estimate finish Fri Dec 22 15:19:58 2006 0.59% done, estimate finish Fri Dec 22 15:19:02 2006 mkisofs command: --- /usr/bin/X11/mkisofs -gui -graft-points -volid label -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-username/k3b5OEJwb.tmp -rational-rock -hide-list /tmp/kde-username/k3bypiyec.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-username/k3bZrqy7a.tmp -untranslated-filenames -max-iso9660-filenames -iso-level 3 -path-list /tmp/kde-username/k3bnL9xYb.tmp === = What seems strange to me is that I tried creating only the iso image with k3b, then burnt the cd using: dd if=/tmp/k3b_image.iso | cdrecord speed=10 dev=/dev/scd0 driveropts=BURNFREE -v - and it worked perfectly... then I discovered (amazingly enough) that cdrecord is a symlink to wodim... Any ideas on what's going wrong? K3B does not work with wodim and the cdrecord simply symlinks to wodim. Since mkisofs has also been similarly replaced, expect even more problems. There is nothing wrong with the iso file and wodim apparently is OK with the command line options in your dd (hey, a cool way of doing this!). To me, there is no good reason why one cannot have both cdrecord and wodim (and mkisofs and genisofs) one one's system. The newer upgrades throw away the older programs which may still be needed by other software. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
k3b + wodim fails to burn
Hi! I just upgraded and have these packages installed: Package: wodim Architecture: i386 Source: cdrkit Version: 9:1.1.0-1 Package: k3b Architecture: i386 Version: 0.12.17-5 When I try to burn data-cd using k3b it fails with the following error: [BLAH BLAH BLAH...] Starting to write CD/DVD at speed 10. 0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.002s timeout 200s Writing pregap for track 1 at -150 write track pad data: error after 0 bytes BFree: 1029 K BSize: 1029 K Starting new track at sector: 0 Track 01:0 of 666 MB written. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.002s timeout 200s /usr/bin/X11/wodim: A write error occured. /usr/bin/X11/wodim: Please properly read the error message above. write track data: error after 0 bytes Writing time: 38.150s Average write speed 119.4x. Fixating... Fixating time:0.004s cdrecord command: --- /usr/bin/X11/wodim -v gracetime=2 dev=1,0,0 speed=10 -dao driveropts=burnfree -eject -overburn -data -tsize=341118s - mkisofs --- Warning: creating filesystem that does not conform to ISO-9660. Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS. Warning: creating filesystem that does not conform to ISO-9660. Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS. 341118 Warning: creating filesystem that does not conform to ISO-9660. Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS. I: -input-charset not specified, using utf-8 (detected in locale settings) 0.15% done, estimate finish Fri Dec 22 15:27:27 2006 0.29% done, estimate finish Fri Dec 22 15:21:53 2006 0.44% done, estimate finish Fri Dec 22 15:19:58 2006 0.59% done, estimate finish Fri Dec 22 15:19:02 2006 mkisofs command: --- /usr/bin/X11/mkisofs -gui -graft-points -volid label -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-username/k3b5OEJwb.tmp -rational-rock -hide-list /tmp/kde-username/k3bypiyec.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-username/k3bZrqy7a.tmp -untranslated-filenames -max-iso9660-filenames -iso-level 3 -path-list /tmp/kde-username/k3bnL9xYb.tmp What seems strange to me is that I tried creating only the iso image with k3b, then burnt the cd using: dd if=/tmp/k3b_image.iso | cdrecord speed=10 dev=/dev/scd0 driveropts=BURNFREE -v - and it worked perfectly... then I discovered (amazingly enough) that cdrecord is a symlink to wodim... Any ideas on what's going wrong? Thanks Bye!
