Re: new Kernel 2.4 missing Old Tulip module ?
The structure of the /lib/modules directory has been changed in the 2.4 kernels so I guess the modutils can't find the correct kernel module. (try lsmod, it should list all modules that are currently loaded) I don't know how to fix this however (see my previous mail :-) Nico On Sat, Dec 30, 2000 at 04:07:19AM -0800, Jack O Max wrote: I have tried the Generic DECchip DIGITAL EtherWORKS PCI/EISA module and build it into the kernel. The Netgear FA310TX cannot brings up after reboot. Here is the part of the boot message: Modprobe: modprobe : Can't locate module eth0 Configuring network interfaces: SIOCSIFADDR: No such device Eth0: unknown interface: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device Eth0: unknown interface: No such device Eth0: unknown interface: No such device Done . . After login, the ifconfig appears lo (Local Loopback) only. Do you have any suggestion? Warm Regards, Jack P.s. I have tried the DECchip Tulip (dc21x4x) PCI support' and it work ok with my Netgear card most of the time, except it locks up the eth0, if there was a few minutes of network outage. Example: The upstream network has outage for 10 minutes and the Netgear will lock up eth0 even the network backs on. I have to manually use ifdown eth0 and ifup eth0 to brings it up. It is still in the kernel, look for the Generic DECchip DIGITAL EtherWORKS PCI/EISA configuration option. Cheers, Remco. --- Remco van de Meent [EMAIL PROTECTED] wrote: Jack O Max wrote: I found that the new Kernel 2.4 does not have the Old DECchip Tulip (dc21x4x) PCI support. My 1 year old Netgear FA310TX does not work properly without this module. Any suggestion to solve this problem? __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] - It has been said that there are only two businesses that refer to customers as users: illegal drug trade and the computer industry. - Nico De Ranter Sony Service Center (SDCE/NEE-B) Sint Stevens Woluwestraat 55 (Rue de Woluwe-Saint-Etienne) 1130 Brussel (Bruxelles), Belgium, Europe, Earth Telephone: +32 2 724 86 41 Telefax: +32 2 726 26 86 e-mail: [EMAIL PROTECTED]
Re: new Kernel 2.4 missing Old Tulip module ?
On Wed, Jan 03, 2001 at 10:48:17AM +0100, Nico De Ranter wrote: The structure of the /lib/modules directory has been changed in the 2.4 kernels so I guess the modutils can't find the correct kernel module. (try lsmod, it should list all modules that are currently loaded) I don't know how to fix this however (see my previous mail :-) Upgrade to modutils from woody. -- o--o ___ |Leszek Gerwatowski|_/_|_\ o--o (o\__/o)=) Don't fix it if it isn't broken
new Kernel 2.4 missing Old Tulip module ?
I found that the new Kernel 2.4 does not have the Old DECchip Tulip (dc21x4x) PCI support. My 1 year old Netgear FA310TX does not work properly without this module. Any suggestion to solve this problem? Thanks. Have a Happy New Year. __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/
Re: new Kernel 2.4 missing Old Tulip module ?
Jack O Max wrote: I found that the new Kernel 2.4 does not have the Old DECchip Tulip (dc21x4x) PCI support. My 1 year old Netgear FA310TX does not work properly without this module. Any suggestion to solve this problem? It is still in the kernel, look for the Generic DECchip DIGITAL EtherWORKS PCI/EISA configuration option. Cheers, Remco.
Re: new Kernel 2.4 missing Old Tulip module ?
I have tried the Generic DECchip DIGITAL EtherWORKS PCI/EISA module and build it into the kernel. The Netgear FA310TX cannot brings up after reboot. Here is the part of the boot message: Modprobe: modprobe : Can't locate module eth0 Configuring network interfaces: SIOCSIFADDR: No such device Eth0: unknown interface: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device Eth0: unknown interface: No such device Eth0: unknown interface: No such device Done . . After login, the ifconfig appears lo (Local Loopback) only. Do you have any suggestion? Warm Regards, Jack P.s. I have tried the DECchip Tulip (dc21x4x) PCI support' and it work ok with my Netgear card most of the time, except it locks up the eth0, if there was a few minutes of network outage. Example: The upstream network has outage for 10 minutes and the Netgear will lock up eth0 even the network backs on. I have to manually use ifdown eth0 and ifup eth0 to brings it up. It is still in the kernel, look for the Generic DECchip DIGITAL EtherWORKS PCI/EISA configuration option. Cheers, Remco. --- Remco van de Meent [EMAIL PROTECTED] wrote: Jack O Max wrote: I found that the new Kernel 2.4 does not have the Old DECchip Tulip (dc21x4x) PCI support. My 1 year old Netgear FA310TX does not work properly without this module. Any suggestion to solve this problem? __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/