ppp, must dial 0 before number, how?

[A.E. Roy]

I need to dial 0 to phone out of the building, how to I set up ppp to wait for 
a new dialingtone after the 0?
Thanks

__

Denne eposten er sendt ved hjelp av http://www.Organizer.net
- Norges ledende webbaserte kommunikasjonsløsning.

Re: ppp, must dial 0 before number, how?

[Remco van de Meent]

A.E. Roy wrote:
 I need to dial 0 to phone out of the building, how to I set up ppp to
 wait for a new dialingtone after the 0?

Put 0, (without quotes) in front of the number you're trying to dial.
The comma makes your modem wait for two seconds after the initial 0.

Cheers,
Remco.

Re: ppp, must dial 0 before number, how?

[Peter O. Fedichev]

I have been asking the same question before and make up the following resume:
(you can also read mgetty+sendfax info you'd find that dial-command  ATX0DP0 
would do

the job (it says don't wait for the dial tone, go to pulse mode, dial 0))

so put
Dial Command = ATX0DP0
in your wvdial.conf

Re: ppp, must dial 0 before number, how?

[Moses Wildermuth]

Hello A.E.,

From the desk of Moses Wildermuth. Money Talks Enterprises, 
http://moneytalks.giftworldnet.com/  
 On 15-Nov-00, A.E. wrote the following in an email regarding ppp, must dial
0 before number, how?---
 I need to dial 0 to phone out of the building, how to I set up ppp to wait
 for a new dialingtone after the 0? Thanks

  Standard way is with a comma.  So I would try to run pppconfig and edit
the connection to read 0,(Phone number).  Not tested so I don't know if
PPPConfig will let you do it.  if not edit the particular ip script
manually.  Just some ideas.

Regards 
-- 
MosesPro
Money Talks Enterprises

http://www.angelfire.com/ia/mosespro, ICQ-13469530, AIM-Wolfy2264
A3000D, Warp040/40, Spectrum, ASDG Xserial, Nexus,2meg Chip, 64meg Fast,
8megs DMA(RAD:), 9+1.2gig SCSI2, Zip100 and  Pinnacle 2X CDR/W;Running Hot
with Kick3.1, OS3.5 and Scalos1.2! Emulating MacOS7.61 and Win3.11 for 
WorkGroup,Struggling with Linux m68k.