Salut Donne nous le contenu de /etc/fstab et les options passées au noyau dans lilo.conf A+ Olivier --- moici ce que j ai en fesant un dmesg et le fichier /etc/fstab ils sont només dmseg.txt et fstab.txt Merci Frederico ----
Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Kernel command line: auto BOOT_IMAGE=Linux ro root=341 Initializing CPU#0 Detected 999.561 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1992.29 BogoMIPS Memory: 254640k/262080k available (1783k kernel code, 7052k reserved, 549k data, 280k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000 CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 999.5489 MHz. ..... host bus clock speed is 199.9097 MHz. cpu: 0, clocks: 1999097, slice: 999548 CPU0<T0:1999088,T1:999536,D:4,S:999548,C:1999097> mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb250, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Disabling VIA memory write queue: [55] 89->09 Unknown bridge resource 0: assuming transparent Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded vga16fb: initializing vga16fb: mapped to 0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:DMA ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:DMA hdb: C/H/S=0/0/0 from BIOS ignored hdb: ST320413A, ATA DISK drive hdd: AOPEN CD-RW CRW2440, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hdb: 39102336 sectors (20020 MB) w/1024KiB Cache, CHS=38792/16/63 hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.97.sv Partition check: hdb: [PTBL] [2434/255/63] hdb1 hdb2 hdb3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Loading I2O Core - (c) Copyright 1999 Red Hat Software I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software loop: loaded (max 8 devices) Compaq CISS Driver (v 2.4.5) fealnx.c:v2.51 Nov-17-2001 eth0: 100/10M Ethernet PCI Adapter at 0xdc00, 00:40:95:20:12:a8, IRQ 10. 8139cp 10/100 PCI Ethernet driver v0.0.6 (Nov 19, 2001) 8139cp: pci dev 00:0c.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.24 eth1: RealTek RTL8139 Fast Ethernet at 0xd081a000, 00:10:a7:0a:47:61, IRQ 11 eth1: Identified 8139 chip type 'RTL-8139C' HDLC support module revision 1.02 for Linux 2.4 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.97.sv Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Highpoint HPT370 Softwareraid driver for linux version 0.01 No raid array found SCSI subsystem driver Revision: 1.00 Red Hat/Adaptec aacraid driver, Apr 14 2002 DC390: 0 adapters found 3ware Storage Controller device driver for Linux v1.02.00.016. 3w-xxxx: No cards with valid units found. request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted i2o_scsi.c: Version 0.0.1 chain_pool: 0 bytes @ c1404e80 (512 byte buffers X 4 can_queue X 0 i2o controllers) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 280k freed spurious 8259A interrupt: IRQ7. Adding Swap: 248996k swap-space (priority -1) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,65), internal journal usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver keyboard usbkbd.c: :USB HID Boot Protocol keyboard driver scsi0 : SCSI host adapter emulation for IDE ATAPI devices apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,67), internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Disk change detected on device ide1(22,64) hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 64 isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 64 isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 0 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 2 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 4 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 6 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 0 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 2 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 4 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 6 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 0 FAT: unable to read boot sector hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 0 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 1 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 2 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 3 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 4 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 5 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 6 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 7 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 0 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 1 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 2 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 3 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 4 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 5 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 6 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 7 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 0 FAT: unable to read boot sector hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 64 isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32 hdd: command error: status=0x51 { DriveReady SeekComplete Error } hdd: command error: error=0x50 end_request: I/O error, dev 16:40 (hdd), sector 2 EXT2-fs: unable to read superblock
# /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> /dev/hdb1 / ext3 errors=remount-ro 0 1 /dev/hdb2 none swap sw 0 0 proc /proc proc defaults 0 0 /dev/fd0 /floppy auto user,noauto 0 0 /dev/cdrom /cdrom iso9660 ro,user,noauto 0 0 /dev/hdb3 /home ext3 defaults 0 2