Impossible de lancer startx
Bonjour, Voilà j'ai installer une Woody sur une machine, quel bonheur :) Mais j'ai aussi besoin de temps en temps de X, mais si je lance startx j'ai ceci: Que dois-je faire ? warning: process set to nice value 0 instead of -10 as requested This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Thu Mar 6 13:48:43 2003 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Generic Monitor (**) | |--Device Generic Video Card (**) |--Input Device Generic Keyboard (**) XKB: rules: xfree86 (**) XKB: model: pc104 (**) XKB: layout: us (**) |--Input Device Configured Mouse (**) |--Input Device Generic Mouse (WW) The directory /usr/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (**) FontPath set to unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(1:0:0) ATI Rage 128 RF rev 0, Mem @ 0xd800/26, 0xdfefc000/14, I/O @ 0x6800/8, BIOS @ 0xdfec/17 (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.1.9 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module pex5: vendor=The XFree86
Re: Impossible de lancer startx
As-tu fais la config de ton serveur X? (X --configure) a premiere vue, il ne peut choisir de définition par défaut (800x600, ...) Si je fait X -configure voilà ce que j'obtiens: emeraude:~# X -configure warning: process set to nice value 0 instead of -10 as requested This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Thu Mar 6 15:52:47 2003 (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(1:0:0) ATI Rage 128 RF rev 0, Mem @ 0xd800/26, 0xdfefc000/14, I/O @ 0x6800/8, BIOS @ 0xdfec/17 List of video drivers: atimisc r128 radeon mga glint nv tga s3virge sis rendition neomagic i740 tdfx savage cirrus vmware tseng trident chips apm glide fbdev i128 ati i810 imstt ark cyrix siliconmotion vesa vga v4l (II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o (II) Module atimisc: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 6.3.6 (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o (II) Module r128: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 4.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o (II) Module radeon: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 4.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o (II) Module mga: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o (II) Module glint: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o (II) Module nv: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/tga_drv.o (II) Module tga: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o (II) Module s3virge: vendor=Kevin Brosius compiled for 4.1.0.1, module version = 1.6.13 (II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o (II) Module sis: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 0.6.0 (II) Loading /usr/X11R6/lib/modules/drivers/rendition_drv.o (II) Module rendition: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 4.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o (II) Module neomagic: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/i740_drv.o (II) Module i740: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o (II) Module tdfx: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o (II) Module savage: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.1.16 (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o (II) Module cirrus: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/vmware_drv.o (II) Module vmware: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 10.4.0 (II) Loading /usr/X11R6/lib/modules/drivers/tseng_drv.o (II) Module tseng: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o (II) Module trident: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o (II) Module chips: vendor=The XFree86
Re: Impossible de lancer startx
Fatal server error: no screens found Nous donner le contenu de ton fichier XF86Config-4 ainsi que le nom de ta carte vidéo (de préférence, la sortie de lspci -vvv). OK, c'est une ATI Rage 128 Pro sur slot AGP emeraude:~# lspci -vvv | more 00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort+ SERR- PERR- Latency: 8 Region 0: Memory at e000 (32-bit, prefetchable) Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=none Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort+ SERR- PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 5000-6fff Memory behind bridge: dfe0-dfef Prefetchable memory behind bridge: d7c0-dfcf BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:05.0 SCSI storage controller: Artop Electronic Corp AEC6712S SCSI (rev 02) Subsystem: Artop Electronic Corp AEC6712S SCSI Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- Latency: 64 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at d800 Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Interrupt: pin A routed to IRQ 5 --More-- Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d400 00:07.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 43) Subsystem: D-Link System Inc: Unknown device 1400 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 64 (750ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at d000 Region 1: Memory at df00 (32-bit, non-prefetchable) Expansion ROM at dffe [disabled] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0c.0 RAID bus controller: Promise Technology, Inc. 20265 (rev 02) Subsystem: Promise Technology, Inc.: Unknown device 4d33 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 64 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at cc00 Region 1: I/O ports at c800 Region 2: I/O ports at c400 Region 3: I/O ports at c000 Region 4: I/O ports at bc00 Region 5: Memory at dffa (32-bit, non-prefetchable) Expansion ROM at dffc [disabled] Capabilities: [58] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags:
Re: Impossible de lancer startx
OK, c'est une ATI Rage 128 Pro sur slot AGP [...] 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF Comme la carte a l'air bien détectée (d'après le premier log du lancement de startx), le problème doit probablement venir de la configuration de ton écran. Quand tu fais un dpkg-reconfigure xserver-xfree86, quelles valeurs indiques-tu ? (Ou fournis la section du fichier XF86Config-4 correspondante) Oui la carte à l'air de bien passé, je ne suis moins sur pour l'Ecran ou la souris Donc voici mon fichier XF86Config-4: emeraude:/etc# cat /etc/X11/XF86Config-4 ### BEGIN DEBCONF SECTION # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the # Debian X Configuration tool, using values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type man XF86Config-4 at the shell prompt.) # # If you want your changes to this file preserved by dexconf, only make changes # before the ### BEGIN DEBCONF SECTION line above, and/or after the # ### END DEBCONF SECTION line below. # # To change things within the debconf section, run the command: # dpkg-reconfigure xserver-xfree86 # as root. Also see How do I add custom sections to a dexconf-generated # XF86Config or XF86Config-4 file? in /usr/share/doc/xfree86-common/FAQ.gz. Section Files FontPathunix/:7100# local font server # if the local font server has problems, we can fall back on these FontPath/usr/lib/X11/fonts/misc FontPath/usr/lib/X11/fonts/cyrillic FontPath/usr/lib/X11/fonts/100dpi/:unscaled FontPath/usr/lib/X11/fonts/75dpi/:unscaled FontPath/usr/lib/X11/fonts/Type1 FontPath/usr/lib/X11/fonts/Speedo FontPath/usr/lib/X11/fonts/100dpi FontPath/usr/lib/X11/fonts/75dpi EndSection Section Module LoadGLcore Loadbitmap Loaddbe Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadpex5 Loadrecord Loadspeedo Loadtype1 Loadvbe Loadxie EndSection Section InputDevice Identifier Generic Keyboard Driver keyboard Option CoreKeyboard Option XkbRules xfree86 Option XkbModel pc104 Option XkbLayout fr EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/psaux Option Protocol PS/2 Option Emulate3Buttons true Option ZAxisMapping 4 5 EndSection Section InputDevice Identifier Generic Mouse Driver mouse Option SendCoreEventstrue Option Device/dev/input/mice Option Protocol ImPS/2 Option Emulate3Buttons true Option ZAxisMapping 4 5 EndSection Section Device Identifier ATI Rage Fury 128 Driver ati VideoRam16 Option UseFBDev true EndSection Section Monitor Identifier Microsoft Wireless Wheel Mouse HorizSync 30-70 VertRefresh 50-160 Option DPMS EndSection Section Screen Identifier Default Screen Device ATI Rage Fury 128 Monitor Microsoft Wireless Wheel Mouse DefaultDepth24 SubSection Display Depth 1 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 4 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 8 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 15 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 16 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 24 Modes 1024x768 800x600 640x480 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default Screen InputDevice Generic Keyboard InputDevice Configured Mouse InputDevice Generic Mouse EndSection Section DRI Mode0666 EndSection ### END DEBCONF SECTION _ Pro ou perso, toutes les adresses et numéros de tél que vous cherchez
Re: Impossible de lancer startx
[...] Section Device Identifier ATI Rage Fury 128 Driver ati Je croyais que tu utilisais le pilote r128 ? Ce pilote semble être prévu pour les anciennes ATI (avant les r128) d'après http://www.xfree86.org/4.1.0/ati3.html. Oui moi aussi VideoRam16 Il ne faut pas spécifier la taille en ko oui oui :) j'hésite entre 16 et 32 (Mo) je ne sais plus Option UseFBDev true EndSection Section Monitor Identifier Microsoft Wireless Wheel Mouse Curieux identifiant d'écran ... :-) Oula! Y'a une boulette ! Tu as bien utilisé dpkg-reconfigure xserver-xfree86 pour configure X11 ? HorizSync 30-70 VertRefresh 50-160 Option DPMS EndSection Tu peux peut-être essayer de modifier ces fréquences au fur et à mesure de tes tests avec dpkg-reconfigure pour voir si les résultats sont modifiés. Mais à mon avis, le plus douteux est le Driver ati ... Ce pilote n'est d'ailleurs listé dans le log du serveur XFree que tu nous a donné quelques messages auparavant. Okey je vasi tester tout ca ! _ MSN Search, le moteur de recherche qui pense comme vous ! http://search.msn.fr/worldwide.asp
