Re: APT-GET Permission non-accor dée (alors que je suis root)
Bonjour à nouveau, Salut, Voici aprés redémarrage ce que me renvoie dmesg : Y voyez vous quelquechose. on va voir plus bas. En dernier recours, il ne me reste plus qu'a ré-installer toute la machine. Ce serait dommage, mais si ça fait gagner du temps, pourquoi pas ... ACPI: PCI Root Bridge [PCI0] (:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 0900-097f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0800-083f claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller :00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device PCI: Transparent bridge - :00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHR._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0.PCXA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0.PCXB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *7 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try pci=routeirq. If it helps, post a report PCI: Cannot allocate resource region 4 of device :00:1d.0 PCI: Cannot allocate resource region 4 of device :00:1d.1 PCI: Cannot allocate resource region 0 of device :00:1f.2 PCI: Cannot allocate resource region 1 of device :00:1f.2 PCI: Cannot allocate resource region 2 of device :00:1f.2 PCI: Cannot allocate resource region 3 of device :00:1f.2 PCI: Cannot allocate resource region 4 of device :00:1f.2 PCI: Device :00:00.0 not found by BIOS pnp: 00:01: ioport range 0x408-0x40f has been reserved pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:01: ioport range 0x700-0x71f has been reserved PCI: Bridge: :00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: :06:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: :06:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: :00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: :00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: :00:1c.0 IO window: disabled. MEM window: fdf0-fdff PREFETCH window: disabled. PCI: Bridge: :00:1e.0 IO window: 1000-3fff MEM window: fbf0-fcff PREFETCH window: 5000-500f ACPI: PCI Interrupt :00:02.0[A] - GSI 16 (level, low) - IRQ 169 PCI: Setting latency timer of device :00:02.0 to 64 ACPI: PCI Interrupt :00:04.0[A] - GSI 16 (level, low) - IRQ 169 PCI: Setting latency timer of device :00:04.0 to 64 PCI: Setting latency timer of device :06:00.0 to 64 PCI: Setting latency timer of device :06:00.2 to 64 ACPI: PCI Interrupt :00:06.0[A] - GSI 16 (level, low) - IRQ 169 PCI: Setting latency timer of device :00:06.0 to 64 PCI: Setting latency timer of device :00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1234246311.284:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device :00:02.0 to 64 Allocate Port Service[:00:02.0:pcie00] PCI: Setting latency timer of device :00:04.0 to 64 Allocate Port Service[:00:04.0:pcie00] PCI: Setting latency timer of device :00:06.0 to 64 Allocate Port Service[:00:06.0:pcie00] isapnp: Scanning for PnP cards... isapnp: No Plug Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250:
Re: APT-GET Permission non-accor dée (alors que je suis root)
Je n'ai rien d'autre quand je fait dmsg | tail... ok. Est-ce que BOOTLOGD_ENABLED=yes dans /etc/default/bootlogd Sinon, mets-le à yes et redémarre le système. Ensuite regarde ce qu'il y a dans /var/log/boot Déjà, on voit que tu es en etch. Ensuite, on voit plein de RDONLY, il y a bien un problème d'écriture quelque part. Oui, on finit toujours par y arriver. Merci de m'encourager. Nous sommes là pour ça, et en plus le problème est intéressant. Peux-tu nous mettre la sortie de cat /etc/fstab et cat /etc/apt/sources.list Alors voici en un post toutes les commandes demandées : HPU1HD08:/var/log# ls -l /usr/ total 120 drwxr-xr-x 12 root root 4096 2009-01-30 09:24 . drwxr-xr-x 23 root root 4096 2008-04-29 22:37 .. drwxr-xr-x 2 root root 36864 2009-01-02 09:26 bin drwxr-xr-x 2 root root 4096 2008-04-29 18:28 games drwxr-xr-x 38 root root 4096 2009-01-02 09:26 include drwxr-xr-x 58 root root 36864 2009-01-22 15:08 lib drwxr-xr-x 3 root root 4096 2008-05-03 14:31 lib64 drwxrwsr-x 11 root staff 4096 2008-05-05 15:12 local drwxr-xr-x 2 root root 12288 2008-06-10 16:09 sbin drwxr-xr-x 123 root root 4096 2008-12-17 10:55 share drwxrwsr-x 3 root src4096 2008-05-03 14:34 src drwxr-xr-x 3 root root 4096 2008-04-29 20:38 X11R6 Rien d'anormal ici HPU1HD08:/var/log# cat /etc/debian_version 4.0 Etch donc. Une fois le problème réglé ce serait peut-être une bonne idée de passer à lenny, mais ce sera pour plus tard. HPU1HD08:/var/log# cat /etc/fstab # /etc/fstab: static file system information. # # file system mount point type options dump pass proc/proc procdefaults0 0 /dev/sda1 / ext3defaults,errors=remount-ro 0 1 J'enlèverai 'errors=remount-ro' sur cette ligne et redémarrerai le système. Tu pourra toujours le remettre plus tard. /dev/sda5 noneswapsw 0 0 /dev/hda/media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/fd0/media/floppy0 autorw,user,noauto 0 0 HPU1HD08:/var/log# cat /etc/apt/sources.list # # deb cdrom:[Debian GNU/Linux 4.0 r2 _Etch_ - Official i386 DVD Binary-1 20080102-13:19]/ etch contrib main deb cdrom:[Debian GNU/Linux 4.0 r2 _Etch_ - Official i386 DVD Binary-1 20080102-13:19]/ etch contrib main les deux lignes pour le cdrom sont inutiles, tu peux les commenter (mettre une # en début de ligne). Ensuite, aptitude update aptitude upgrade deb http://ftp.fr.debian.org/debian/ etch main deb-src http://ftp.fr.debian.org/debian/ etch main deb http://security.debian.org/ etch/updates main contrib deb-src http://security.debian.org/ etch/updates main contrib #deb http://download.webmin.com/download/repository sarge contrib deb http://volatile.debian.org/debian-volatile etch/volatile main contrib non-free #deb http://volatile.debian.net/debian-volatile etch/volatile main Courage ! -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to debian-user-french-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: APT-GET Permission non-accor dée (alors que je suis root)
Le 29-01-2009, à 12:03:25 +0400, Patrice YEE CHONG TCHI KAN (patr...@network.re) a écrit : Désolé le tableau est en HTML. J'ai aussi un accés SSH, j'ai tapé mount : HPU1HD08:/var/www/www.kabardock.fr# mount /dev/sda1 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) Il n'y a qu'une partition / ? Pas de partition spéciale pour /usr et /home par exemple ? Que donne df -h -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to debian-user-french-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: APT-GET Permission non-accor dée (alors que je suis root)
Le 29-01-2009, à 15:21:26 +0400, Patrice YEE CHONG TCHI KAN (patr...@network.re) a écrit : HPU1HD08:/var/www/www.kabardock.fr# df -h Sys. de fich. Tail. Occ. Disp. %Occ. Monté sur /dev/sda1 71G 16G 52G 24% / donc elle n'est pas pleine. C'est déjà ça. Remarque : pas besoin d'être en root pour ce genre de commandes (df, mount, etc..). tmpfs 507M 0 507M 0% /lib/init/rw udev 10M 52K 10M 1% /dev tmpfs 507M 0 507M 0% /dev/shm Qu'est que ça veut dire remount-ro dans /dev/sda1 on / type ext3 (rw,errors=remount-ro) ? Cela veut dire que s'il y a un problème avec le FS, le système va le remonter en mode ro, c'est à dire read only (lecture seule). Peut-être est-ce arrivé chez toi. Tu devrais peut-être redémarré le système et ensuite aller voir dans /var/log les fichiers modifiés au démarrage (syslog, dmesg, etc...) (fais un ls -lrt dedans, les dernières lignes sont les fichiers modifiés en derniers). Peux-tu installer d'autres programmes avec aptitude ou c'est seulement [me rappelle plus du nom] qui foire ? As-tu fait un aptitude update aptitude safe-upgrade avant ? Si oui pas de message d'erreur ? Je ne sais pas trop où regarder pour ton problème, désolé. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to debian-user-french-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: APT-GET Permission non-accor dée (alors que je suis root)
Bonjour Guy, Romaric et steeve, et les autres Salut, Désolé Guy, tu as certainement reçu ce message deux fois. Tu devrais peut-être redémarré le système et ensuite aller voir dans /var/log les fichiers modifiés au démarrage (syslog, dmesg, etc...) (fais un ls -lrt dedans, les dernières lignes sont les fichiers modifiés en derniers). Peux-tu installer d'autres programmes avec aptitude ou c'est seulement [me rappelle plus du nom] qui foire ? En fait c'est uniquement le répertoire /usr/bin/ n'est pas inscriptible. Donc toutes les installation apt-get qui ont besoin d'écrire dans ce répertoire sont bloquées. Que donne 'ls -l /usr/' ? Chez moi : rwxr-xr-x 2 root root 98304 jan 29 08:23 bin drwxr-xr-x 2 root root4096 déc 23 11:33 games drwxr-xr-x 70 root root 12288 jan 18 16:46 include drwxr-xr-x 215 root root 135168 jan 27 08:40 lib lrwxrwxrwx 1 root root 24 avr 8 2008 lib32 - /emul/ia32-linux/usr/lib lrwxrwxrwx 1 root root 3 avr 8 2008 lib64 - lib drwxrwsr-x 11 root staff 4096 déc 9 15:09 local drwx-- 2 root root 16384 sep 28 2007 lost+found drwxr-xr-x 2 root root 20480 jan 28 13:56 sbin drwxr-xr-x 387 root root 12288 jan 28 13:56 share drwxrwsr-x 10 root src 4096 jan 23 09:27 src drwxr-xr-x 2 root root4096 sep 11 11:35 X11R6 As-tu fait un aptitude update OK aptitude safe-upgrade La commande n'existe pas. C'est bizarre. T'es (encore) sous etch ? Que donne cat /etc/debian_version Il y a bien aptitude upgrade mais il me propose l'upgrade de tous ce qui a une mise-à-jour mais je sait que ça va poser problème avec le /usr/bin/ non-inscriptible. Clairement, mais il faut quand même penser à faire des mises à jour de temps en temps :-) Quelles sont les dernières lignes de la commande dmesg ? $ dmesg | tail Histoire de voir que le système de fichier ou le DD ne sont pas HS HPU1HD08:~# dmesg | tail PM: Writing back config space on device :02:02.0 at offset 1 (was 2b0, writing 2b00146) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver ACPI: Power Button (FF) [PWRF] tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present rien d'intéressant là. Regarde s'il n'y a pas quelque chose qui concerne ton disque et tes (ta) partitions Si tu fait un strace sur ton apt-get, tu devrais pouvoir voir où ça coince (problème de FS ou autre). De mémoire, la commande s'écrit ainsi : strace -o sortie.log apt-get install ton_paquet (mais fait quand même un pti man strace) J'ai mis le fichier ici : http://www.network.re/debian-french-doc/sortie.log Et effectivement, je n'y comprends pas énormément de choses. Déjà, on voit que tu es en etch. Ensuite, on voit plein de RDONLY, il y a bien un problème d'écriture quelque part. Par contre ce qui est certain, c'est que mon système de fichier n'est pas en écriture seule SAUF pour /usr/bin/ : HPU1HD08:~# mkdir /usr/bin/blablah/ mkdir: ne peut créer le répertoire `/usr/bin/blablah/': Permission non accordée Très bizarre. Alors que HPU1HD08:~# mkdir /usr/blablah/ passe sans problème. Bon. Merci encore, J'ai confiance qu'on arrivera à trouver la solution de ce problème. :) Oui, on finit toujours par y arriver. Peux-tu nous mettre la sortie de cat /etc/fstab et cat /etc/apt/sources.list -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to debian-user-french-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org