RE : Impossible de lancer startx
[...] >>>VideoRam16 >>Il ne faut pas spécifier la taille en ko >oui oui :) j'hésite entre 16 et 32 (Mo) je ne sais plus Oui mais il fallait mettre 16384 et non 16 qui ne sont pas de Mo mais des ko C'est cela qu'il voulait dire ;) @+ -- .''`. E d i S T O J I C E V I C : :' : http://www.debianworld.org `. `~' GPG: C360 FCF0 AB3A 2AB0 52E7 044F 1B3D 2109 1237 B032 `- * Ce message et toutes les pièces jointes (ci-après le "message") sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. La SOCIETE GENERALE et ses filiales déclinent toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration. Neither SOCIETE GENERALE nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. *
Re: Impossible de lancer startx
Le 06/03/03 - 23:22, Frédéric Bothamy <[EMAIL PROTECTED]> tapotait: >> Il ne faut pas spécifier la taille en ko ? >> si, tout à fait. pour avoir configuré mon XFree récemment avec xf86config, il demande de spécifier, en ko, la taille de la RAM vidéo. -- F!L
Re: Impossible de lancer startx
Salut Le Jeudi 6 Mars 2003 21:56, pas car a écrit : > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device""/dev/psaux" > Option "Protocol" "PS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents""true" > Option "Device""/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > InputDevice "Configured Mouse" > InputDevice "Generic Mouse" Alors ça, cette section "Generic Mouse", ça m'a tout l'air d'être un sale bug de debconf... Je m'empresserrais de la virer, personnellement. @+ -- Utilisateurs de Linux, enregistrez-vous : http://counter.li.org
Re: Impossible de lancer startx
* pas car <[EMAIL PROTECTED]> [2003-03-06 22:51] : > >[...] > > > >> Section "Device" > >>Identifier "ATI Rage Fury 128" > >>Driver "ati" > > > >Je croyais que tu utilisais le pilote r128 ? Ce pilote semble être > >prévu pour les anciennes ATI (avant les r128) d'après > >http://www.xfree86.org/4.1.0/ati3.html. > > Oui moi aussi > > >>VideoRam16 > > > >Il ne faut pas spécifier la taille en ko > > oui oui :) j'hésite entre 16 et 32 (Mo) je ne sais plus Bien sûr, j'ai malencontreusement oublié le "?" à la fin de la phrase : Il ne faut pas spécifier la taille en ko ? ce qui inverse exactement le sens de la phrase que je voulais indiquer. D'après la doc de http://www.xfree86.org/4.1.0/r128.4.html, la taille doit bien être précisée en ko, soit 16384 dans ton cas. Ceci pourrait d'ailleurs suffire à expliquer les problèmes rencontrés. Fred
Re: Impossible de lancer startx
[...] > Section "Device" >Identifier "ATI Rage Fury 128" >Driver "ati" Je croyais que tu utilisais le pilote r128 ? Ce pilote semble être prévu pour les anciennes ATI (avant les r128) d'après http://www.xfree86.org/4.1.0/ati3.html. Oui moi aussi >VideoRam16 Il ne faut pas spécifier la taille en ko oui oui :) j'hésite entre 16 et 32 (Mo) je ne sais plus >Option "UseFBDev" "true" > EndSection > > Section "Monitor" >Identifier "Microsoft Wireless Wheel Mouse" Curieux identifiant d'écran ... :-) Oula! Y'a une boulette ! Tu as bien utilisé dpkg-reconfigure xserver-xfree86 pour configure X11 ? >HorizSync 30-70 >VertRefresh 50-160 >Option "DPMS" > EndSection Tu peux peut-être essayer de modifier ces fréquences au fur et à mesure de tes tests avec dpkg-reconfigure pour voir si les résultats sont modifiés. Mais à mon avis, le plus douteux est le Driver "ati" ... Ce pilote n'est d'ailleurs listé dans le log du serveur XFree que tu nous a donné quelques messages auparavant. Okey je vasi tester tout ca ! _ MSN Search, le moteur de recherche qui pense comme vous ! http://search.msn.fr/worldwide.asp
Re: Impossible de lancer startx
* pas car <[EMAIL PROTECTED]> [2003-03-06 21:56] : [...] > Section "Device" >Identifier "ATI Rage Fury 128" >Driver "ati" Je croyais que tu utilisais le pilote r128 ? Ce pilote semble être prévu pour les anciennes ATI (avant les r128) d'après http://www.xfree86.org/4.1.0/ati3.html. >VideoRam16 Il ne faut pas spécifier la taille en ko >Option "UseFBDev" "true" > EndSection > > Section "Monitor" >Identifier "Microsoft Wireless Wheel Mouse" Curieux identifiant d'écran ... :-) Tu as bien utilisé dpkg-reconfigure xserver-xfree86 pour configure X11 ? >HorizSync 30-70 >VertRefresh 50-160 >Option "DPMS" > EndSection Tu peux peut-être essayer de modifier ces fréquences au fur et à mesure de tes tests avec dpkg-reconfigure pour voir si les résultats sont modifiés. Mais à mon avis, le plus douteux est le Driver "ati" ... Ce pilote n'est d'ailleurs listé dans le log du serveur XFree que tu nous a donné quelques messages auparavant. Fred
Re: Impossible de lancer startx
> OK, c'est une ATI Rage 128 Pro sur slot AGP [...] > 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF Comme la carte a l'air bien détectée (d'après le premier log du lancement de startx), le problème doit probablement venir de la configuration de ton écran. Quand tu fais un dpkg-reconfigure xserver-xfree86, quelles valeurs indiques-tu ? (Ou fournis la section du fichier XF86Config-4 correspondante) Oui la carte à l'air de bien passé, je ne suis moins sur pour l'Ecran ou la souris Donc voici mon fichier XF86Config-4: emeraude:/etc# cat /etc/X11/XF86Config-4 ### BEGIN DEBCONF SECTION # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the # Debian X Configuration tool, using values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type "man XF86Config-4" at the shell prompt.) # # If you want your changes to this file preserved by dexconf, only make changes # before the "### BEGIN DEBCONF SECTION" line above, and/or after the # "### END DEBCONF SECTION" line below. # # To change things within the debconf section, run the command: # dpkg-reconfigure xserver-xfree86 # as root. Also see "How do I add custom sections to a dexconf-generated # XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz. Section "Files" FontPath"unix/:7100"# local font server # if the local font server has problems, we can fall back on these FontPath"/usr/lib/X11/fonts/misc" FontPath"/usr/lib/X11/fonts/cyrillic" FontPath"/usr/lib/X11/fonts/100dpi/:unscaled" FontPath"/usr/lib/X11/fonts/75dpi/:unscaled" FontPath"/usr/lib/X11/fonts/Type1" FontPath"/usr/lib/X11/fonts/Speedo" FontPath"/usr/lib/X11/fonts/100dpi" FontPath"/usr/lib/X11/fonts/75dpi" EndSection Section "Module" Load"GLcore" Load"bitmap" Load"dbe" Load"ddc" Load"dri" Load"extmod" Load"freetype" Load"glx" Load"int10" Load"pex5" Load"record" Load"speedo" Load"type1" Load"vbe" Load"xie" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc104" Option "XkbLayout" "fr" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device""/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents""true" Option "Device""/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "ATI Rage Fury 128" Driver "ati" VideoRam16 Option "UseFBDev" "true" EndSection Section "Monitor" Identifier "Microsoft Wireless Wheel Mouse" HorizSync 30-70 VertRefresh 50-160 Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "ATI Rage Fury 128" Monitor "Microsoft Wireless Wheel Mouse" DefaultDepth24 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "Generic Mouse" EndSection
Re: Impossible de lancer startx
* pas car <[EMAIL PROTECTED]> [2003-03-06 14:56] : > > > >>Fatal server error: > >>no screens found > > > >Nous donner le contenu de ton fichier XF86Config-4 ainsi que le nom de > >ta carte vidéo (de préférence, la sortie de lspci -vvv). > > > OK, c'est une ATI Rage 128 Pro sur slot AGP [...] > 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF Comme la carte a l'air bien détectée (d'après le premier log du lancement de startx), le problème doit probablement venir de la configuration de ton écran. Quand tu fais un dpkg-reconfigure xserver-xfree86, quelles valeurs indiques-tu ? (Ou fournis la section du fichier XF86Config-4 correspondante) Fred
Re: Impossible de lancer startx
tape XFree86 -configure pour generer un fichier de config (ca marche pas toujours...) Le jeu 06/03/2003 à 14:48, Frédéric Bothamy a écrit : > * pas car <[EMAIL PROTECTED]> [2003-03-06 14:14] : > > Bonjour, > > > > Voilà j'ai installer une Woody sur une machine, quel bonheur :) > > Mais j'ai aussi besoin de temps en temps de X, mais si je lance > > startx j'ai ceci: > > > > Que dois-je faire ? > > [...] > > >(EE) Screen(s) found, but none have a usable > > configuration. > > > >Fatal server error: > >no screens found > > Nous donner le contenu de ton fichier XF86Config-4 ainsi que le nom de > ta carte vidéo (de préférence, la sortie de lspci -vvv). > > Fred > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
Re: Impossible de lancer startx
> >Fatal server error: >no screens found Nous donner le contenu de ton fichier XF86Config-4 ainsi que le nom de ta carte vidéo (de préférence, la sortie de lspci -vvv). OK, c'est une ATI Rage 128 Pro sur slot AGP emeraude:~# lspci -vvv | more 00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 8 Region 0: Memory at e000 (32-bit, prefetchable) Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate= Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 5000-6fff Memory behind bridge: dfe0-dfef Prefetchable memory behind bridge: d7c0-dfcf BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:05.0 SCSI storage controller: Artop Electronic Corp AEC6712S SCSI (rev 02) Subsystem: Artop Electronic Corp AEC6712S SCSI Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at d800 Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin A routed to IRQ 5 --More-- Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d400 00:07.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 43) Subsystem: D-Link System Inc: Unknown device 1400 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (750ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at d000 Region 1: Memory at df00 (32-bit, non-prefetchable) Expansion ROM at dffe [disabled] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0c.0 RAID bus controller: Promise Technology, Inc. 20265 (rev 02) Subsystem: Promise Technology, Inc.: Unknown device 4d33 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at cc00 Region 1: I/O ports at c800 Region 2: I/O ports at c400 Region 3: I/O ports at c000 Region 4: I/O ports at bc00 Region 5: Memory at dffa (32-bit, non-prefetchable) Expansion ROM at dffc [disabled] Capabilities: [58] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.1 IDE inter
Re: Impossible de lancer startx
As-tu fais la config de ton serveur X? (X --configure) a premiere vue, il ne peut choisir de définition par défaut (800x600, ...) Si je fait X -configure voilà ce que j'obtiens: emeraude:~# X -configure warning: process set to nice value 0 instead of -10 as requested This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 6 15:52:47 2003 (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(1:0:0) ATI Rage 128 RF rev 0, Mem @ 0xd800/26, 0xdfefc000/14, I/O @ 0x6800/8, BIOS @ 0xdfec/17 List of video drivers: atimisc r128 radeon mga glint nv tga s3virge sis rendition neomagic i740 tdfx savage cirrus vmware tseng trident chips apm glide fbdev i128 ati i810 imstt ark cyrix siliconmotion vesa vga v4l (II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o (II) Module atimisc: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 6.3.6 (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o (II) Module r128: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 4.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o (II) Module radeon: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 4.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o (II) Module mga: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o (II) Module glint: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o (II) Module nv: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/tga_drv.o (II) Module tga: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o (II) Module s3virge: vendor="Kevin Brosius" compiled for 4.1.0.1, module version = 1.6.13 (II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o (II) Module sis: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.6.0 (II) Loading /usr/X11R6/lib/modules/drivers/rendition_drv.o (II) Module rendition: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 4.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o (II) Module neomagic: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/i740_drv.o (II) Module i740: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o (II) Module tdfx: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o (II) Module savage: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.1.16 (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o (II) Module cirrus: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/vmware_drv.o (II) Module vmware: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 10.4.0 (II) Loading /usr/X11R6/lib/modules/drivers/tseng_drv.o (II) Module tseng: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o (II) Module trident: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o
Re: Impossible de lancer startx
Le Jeudi 6 Mars 2003 14:14, pas car a écrit : > Bonjour, > > Voilà j'ai installer une Woody sur une machine, quel bonheur :) > Mais j'ai aussi besoin de temps en temps de X, mais si je lance > startx j'ai ceci: > > Que dois-je faire ? as tu essayé un dpkg-reconfigure xserver-xfree86 en modifiant queqlues options? -- "Les religions qui se font en troupeau se terminent à l'abattoir" ,. ( . ). " (" ) )' ,') . (` '` .; ) ' (( (" );(, (( ( ;) " )"REISER _"., ,._'_.,)_(..,( . )_ _' )_') (. _..( '..
RE: Impossible de lancer startx
Ce problème peut t'arriver, notamment, si tu utilises une carte graphique nvidia et que tu n'as pas le module approprié dans /etc/XF86Config-4. Sinon, en ce qui me concerne, je ne vois pas ce que cela peut-être d'autre (trop nouveau sous Debian. -Original Message- From: pas car [mailto:[EMAIL PROTECTED] Sent: jeudi 6 mars 2003 14:31 To: debian-user-french@lists.debian.org Subject: Impossible de lancer startx Bonjour, Voilà j'ai installer une Woody sur une machine, quel bonheur :) Mais j'ai aussi besoin de temps en temps de X, mais si je lance startx j'ai ceci: Que dois-je faire ? warning: process set to nice value 0 instead of -10 as requested This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 6 13:48:43 2003 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "Generic Video Card" (**) |-->Input Device "Generic Keyboard" (**) XKB: rules: "xfree86" (**) XKB: model: "pc104" (**) XKB: layout: "us" (**) |-->Input Device "Configured Mouse" (**) |-->Input Device "Generic Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr /lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/S peedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(1:0:0) ATI Rage 128 RF rev 0, Mem @ 0xd800/26, 0xdfefc000/14, I/O @ 0x6800/8, BIOS @ 0xdfec/17 (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Proj
RE : Impossible de lancer startx
>Bonjour, 'Lut >Voilà j'ai installer une Woody sur une machine, quel bonheur :) Mais j'ai aussi besoin >de temps en temps de X, mais si je lance startx j'ai ceci: >Que dois-je faire ? Reconfigurer X correctement en faisant : #dpkg-reconfigure xserver-xfree86 -- .''`. E d i S T O J I C E V I C : :' : http://www.debianworld.org `. `~' GPG: C360 FCF0 AB3A 2AB0 52E7 044F 1B3D 2109 1237 B032 `- * Ce message et toutes les pièces jointes (ci-après le "message") sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. La SOCIETE GENERALE et ses filiales déclinent toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration. Neither SOCIETE GENERALE nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. *
Re: Impossible de lancer startx
* pas car <[EMAIL PROTECTED]> [2003-03-06 14:14] : > Bonjour, > > Voilà j'ai installer une Woody sur une machine, quel bonheur :) > Mais j'ai aussi besoin de temps en temps de X, mais si je lance > startx j'ai ceci: > > Que dois-je faire ? [...] >(EE) Screen(s) found, but none have a usable > configuration. > >Fatal server error: >no screens found Nous donner le contenu de ton fichier XF86Config-4 ainsi que le nom de ta carte vidéo (de préférence, la sortie de lspci -vvv). Fred
Impossible de lancer startx
Bonjour, Voilà j'ai installer une Woody sur une machine, quel bonheur :) Mais j'ai aussi besoin de temps en temps de X, mais si je lance startx j'ai ceci: Que dois-je faire ? warning: process set to nice value 0 instead of -10 as requested This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 6 13:48:43 2003 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "Generic Video Card" (**) |-->Input Device "Generic Keyboard" (**) XKB: rules: "xfree86" (**) XKB: model: "pc104" (**) XKB: layout: "us" (**) |-->Input Device "Configured Mouse" (**) |-->Input Device "Generic Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(1:0:0) ATI Rage 128 RF rev 0, Mem @ 0xd800/26, 0xdfefc000/14, I/O @ 0x6800/8, BIOS @ 0xdfec/17 (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.1.9 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a