Witam, chcialbym sie dowiedziec, czy ponizszy plik ma prawidlowa budowe/konstrukcje, poniewaz przy probie rekonfiguracji ustawien sieciowych zawsze dostaje pewne bledy (ale rekonfiguracja udaje sie).
Na maszynce siedzi sobie XEN, ktorego virtualki korzystaja z roznych VLANow ~# cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback ######################################################## #karta wbudowana - eth0 - TRUNK auto eth0 iface eth0 inet manual #karta 100Mb 3Com - eth1 auto eth1 iface eth1 inet manual #karta 1Gb INTEL - eth2 - TRUNK auto eth2 iface eth2 inet manual ######################################################## # VLANy auto eth0.19 iface eth0.19 inet manual vlan_raw_device eth0 auto eth0.20 iface eth0.20 inet manual vlan_raw_device eth0 auto eth0.21 iface eth0.21 inet manual vlan_raw_device eth0 # interfejsy dla virtualek mostkowane z VLANami auto br19 iface br19 inet manual bridge_ports eth0.19 bridge_fd 2 auto br20 iface br20 inet manual bridge_ports eth0.20 bridge_fd 2 auto br21 iface br21 inet manual bridge_ports eth0.21 bridge_fd 2 # interfejs zarzadzajacy serwerem auto eth2.211 iface eth2.211 inet static address 192.168.73.170 netmask 255.255.255.0 network 192.168.73.0 gateway 192.168.73.254 broadcast 192.168.73.255 vlan_raw_device eth2 ~# /etc/init.d/networking restart Reconfiguring network interfaces... Removed VLAN -:eth0.19:- Removed VLAN -:eth0.20:- Removed VLAN -:eth0.21:- eth0.19: ERROR while getting interface flags: No such device eth0.20: ERROR while getting interface flags: No such device eth0.21: ERROR while getting interface flags: No such device Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config Added VLAN with VID == 19 to IF -:eth0:- Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config Added VLAN with VID == 20 to IF -:eth0:- Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config Added VLAN with VID == 21 to IF -:eth0:- Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config Added VLAN with VID == 211 to IF -:eth0:- Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config ERROR: trying to add VLAN #19 to IF -:eth0:- error: File exists Waiting for br19 to get ready (MAXWAIT is 6 seconds). Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config ERROR: trying to add VLAN #20 to IF -:eth0:- error: File exists Waiting for br20 to get ready (MAXWAIT is 6 seconds). Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config ERROR: trying to add VLAN #21 to IF -:eth0:- error: File exists Waiting for br211 to get ready (MAXWAIT is 6 seconds). Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config Added VLAN with VID == 211 to IF -:eth2:- done. Stan po rekonfiguracji: ~# cat /proc/net/vlan/config VLAN Dev name | VLAN ID Name-Type: VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD eth0.19 | 19 | eth0 eth0.20 | 20 | eth0 eth0.21 | 21 | eth0 eth2.211 | 211 | eth2 i wszystko dziala jak nalezy. -- Tomasz Czachorowski -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org