Leandro Alves wrote:
> Caros Amigos...
>
> Primeiramente gostaria de agradecer a ajuda de todos que me enviram
> dicas sobre a "magnifica" placa SiS 6326..
>
> Mas infelizmente ainda não consegui configurá-la corretamente... e olha
> que nao foi por falta de pesquisa e nem de tentativas... :-)
>
> Acredito e com muita certeza que nao é soh eu que tenho esta placa...
> Entao, por favor, gostaria que aqueles que tem esta placa funcionamendo
> corretamente no X... que me enviasse o respectivo XF86Config pra eu
> comparar com o meu e ver o que tem de tão diferente
>
> Vale lembrar que a minha placa eh uma SiS 6326 AGP e NAO é Onboard...
> mas aceito XF86Config destas placas Onboard tbem... :-)
>
> Galera, mais uma vez, conto com a ajuda de voces...
>
> Agora pra quem nao viu, segue o e-mail que enviei ontem... :-)
>
> Caros Amigos...
>
> Mais uma vez preciso de uma ajudinha... :-)
Oi Leandro!!!
Olha ...no início tb ralei p/ cacete até aprender a usar corretamente o
xf86config, continue tentando...
Fiz um tutorial que pode te ajudar a encontrar onde você está errando...
Bom...como já deve saber digite "xf86config" num terminal, como usuário root,
daí deverá surgir:
This program will create a basic XF86Config file, based on menu selections you
make.
In the Debian system, the XF86Config file resides in /etc/X11. A sample
XF86Config file is supplied in the directory
/usr/share/doc/xserver-common/examples; it is configured for a standard VGA
card and monitor with 640x480 resolution. This program will ask for a pathname
when it is ready to write the file.
You can either take the sample XF86Config as a base and edit it for your
configuration, or let this program produce a base XF86Config file for your
configuration and fine-tune it. Refer to the file
/usr/share/doc/xserver-common/README.Config.gz for a detailed overview of the
configuration process.
For accelerated servers (including accelerated drivers in the SVGA server),
there are many chipset and card-specific options and settings. This program
does not know about these. On some configurations some of these settings must
be specified. Refer to the server manual pages and chipset-specific READMEs.
Before continuing with this program, make sure you know the chipset and amount
of video memory on your video card. The SuperProbe program can help with
this. It is also helpful if you know what server you want to run.
Press enter to continue, or CTRL-C to abort.
Pressione
ENTER!
First specify a mouse protocol type. Choose one from the following list:
1. Microsoft compatible (2-button protocol)
2. Mouse Systems (3-button protocol)
3. Bus Mouse
4. PS/2 Mouse
5. Logitech Mouse (serial, old type, Logitech protocol)
6. Logitech MouseMan (Microsoft compatible)
7. MM Series
8. MM HitTablet
9. Microsoft IntelliMouse
10. Acecad tablet
If you have a two-button mouse, it is most likely of type 1, and if you have
a three-button mouse, it can probably support both protocol 1 and 2. There are
two main varieties of the latter type: mice with a switch to select the
protocol, and mice that default to 1 and require a button to be held at
boot-time to select protocol 2. Some mice can be convinced to do 2 by sending
a special sequence to the serial port (see the ClearDTR/ClearRTS options).
If you have a PS/2 mouse, you should use type 4 regardless of how many
buttons it has.
Enter a protocol number: " XX "
^^
Digite aqui o número da opção referente ao seu tipo de
Mouse, no meu caso o n. 4.
If your mouse has only two buttons, it is recommended that you enable
Emulate3Buttons.
Please answer the following question with either 'y' or 'n'.
Do you want to enable Emulate3Buttons?" n "
^^^
Tecle n se seu mouse for de 3(três)
botões, do contrário tecle y.!
Now give the full device name that the mouse is connected to, for example
/dev/tty00. Just pressing enter will use the default, /dev/mouse.
Mouse device: /dev/psaux
^^^
!Aqui digite a interface na qual o seu mouse está conectado, no
meu caso /dev/psaux.
Beginning with XFree86 3.1.2D, the X server uses the new X11R6.1 XKEYBOARD
extension to manage the keyboard layout. This requires you to answer a
number of questions to add certain entries to the XF86Config file.
The following dialogue will allow you to select from a list of already
preconfigured keymaps. If you don't find a suitable keymap in the list,
the program will try to combine a keymap from additional information you
are asked then. Such a keymap is by default untested and may require
manual tuning. Please report success or required changes for such a
keymap to XFREE86@XFREE86.ORG for addition to the list of preconfigured
