Re: configuración de red
- Original Message - From: Ricardo - Eureka! [EMAIL PROTECTED] To: Lista Español Debian debian-user-spanish@lists.debian.org Sent: Monday, May 26, 2003 4:16 PM Subject: Re: configuración de red On Mon, May 26, 2003 at 02:22:41AM +0200, [EMAIL PROTECTED] wrote: /lib/modules/2.2.20-idepci/net/sis900.o: insmod sis900 failed Falló la instalación. mandanos la salida de lspci, dmesg y lsmod. -- Ricardo A.Frydman Analista de Sistemas de Computación http://www.eureka-linux.com.ar Hola a todos, A mi me pasa el mismo problema, cuando intento cargar el módulo de sis900 me dice que falla. Si intento configurarlo mediante el modconf dice que el dispositivo está busy. Les adjunto las salidas de lspci, dsmesg y lsmod por si ven algo en ellos. Muchas gracias por adelantado. -LSPCI Goolum:/home/jose# lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31) 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 82) 00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) 00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 02) 00:01.6 Modem: Silicon Integrated Systems [SiS]: Unknown device 7013 (rev a0) 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP 00:0a.0 CardBus bridge: Texas Instruments PCI4410 PC card Cardbus Controller (rev 02) 00:0a.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 8017 (rev 02) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 31) --LSMOD-- Module Size Used by ds 6400 1 i82365 22672 1 pcmcia_core45824 0 [ds i82365] af_packet 6152 0 (unused) unix 11352 22 (autoclean) DMESG-- Linux version 2.2.20 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 Sat Apr 20 11:45:28 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0009f000 @ (usable) BIOS-e820: 0def @ 0010 (usable) Detected 863932 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1723.59 BogoMIPS Memory: 224356k/229312k available (1756k kernel code, 412k reserved, 2636k data, 152k init) Dentry hash table entries: 32768 (order 6, 256k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page cache hash table entries: 65536 (order 6, 256k) VFS: Diskquotas version dquot_6.4.0 initialized Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. 256K L2 cache (8 way) CPU: L2 Cache: 256K CPU: Intel Pentium III (Coppermine) stepping 06 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED]) PCI: PCI BIOS revision 2.10 entry at 0xeb2e0 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 262144 bhash 65536) Starting kswapd v 1.5 Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ttyS44 at 0x3220 (irq = 3) is a 8250 ttyS45 at 0x3228 (irq = 3) is a 8250 pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 SIS5513: IDE controller on PCI bus 00 dev 01 SIS5513: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23BA-10, ATA DISK drive hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: HITACHI_DK23BA-10, 9590MB w/512kB Cache, CHS=1222/255/63 hdc: ATAPI 24X DVD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 scsi: fdomain Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0 Failed initialization of WD-7000 SCSI card! IBM MCA SCSI: Version 3.2 IBM MCA SCSI: No Microchannel-bus present -- Aborting. This machine does not have any IBM MCA-bus or the MCA-Kernel-support is not enabled! megaraid: v1.11 (Aug 23,
SUBSCRIBE
This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message by mistake, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation. Este mensaje puede contener informaci confidencial o privilegiada. Si Vd. no es el destinatario ni est autorizado por el mismo para recibir este mensaje, Vd. no debe usar, copiar, revelar ni tomar ninguna medida basada en este mensaje o en la informaci que contiene. Si Vd. ha recibido este mensaje por error, notif de forma inmediata al remitente por correo electr y borre el mensaje. Gracias por su cooperaci
subscribe
This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message by mistake, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation. Este mensaje puede contener informaci confidencial o privilegiada. Si Vd. no es el destinatario ni est autorizado por el mismo para recibir este mensaje, Vd. no debe usar, copiar, revelar ni tomar ninguna medida basada en este mensaje o en la informaci que contiene. Si Vd. ha recibido este mensaje por error, notif de forma inmediata al remitente por correo electr y borre el mensaje. Gracias por su cooperaci
screen de inicio reducido
Probando un juego, el BZLib, se quedó bloquedado el laptop. Le pulsé el boton y le apagué directamente al iniciar de nuevo el sistema Woody, la pantalla donde realiza el chequeo con la tarjeta de video, memoria e incluso el lilo y la debian me aparecen reducidas con la misma resolucion de escritorio pero los limites de la imagen se encuentran muy reducidos, casi la mitad. También tengo instalado Bamboo y aunque el la imagen de Lilo en pantalla me aparece reducido posteriormente el escritorio de las X ocupa todo lo que da la pantalla, como antes. ¿Saben como puede ser solucionado? Gracias This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message by mistake, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation. Este mensaje puede contener informaci confidencial o privilegiada. Si Vd. no es el destinatario ni est autorizado por el mismo para recibir este mensaje, Vd. no debe usar, copiar, revelar ni tomar ninguna medida basada en este mensaje o en la informaci que contiene. Si Vd. ha recibido este mensaje por error, notif de forma inmediata al remitente por correo electr y borre el mensaje. Gracias por su cooperaci
Re: Duplicar disco duro
Hola a todos: Para realizar la copia realize un dd if=/dev/hda of=/dev/hdb. Bueno el resutado es una copia identica, pero al iniciar la maquina con el disco copiado tengo un kernel panic cono resultado. Podrias indicarme donde tengo el fallo. ¿para realizar la copia con el dd tengo que tener las particiones montadas o sin desmostar? Muchas gracias de antemano. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Duplicar disco duro
Hola: Tendo un servidor en el cual tengo que hacer unas pruebas, desearia hacer una copia del disco por si fallan las pruebas, poder restablecer el servicio inmediatamente. Cuento con un disco duro identico al del servidor. Me gustaria hacer una copia identica al disco duro del servidor. Se que se realiza con el comando dd, pero lo que no se es si tengo que realizar un comando dd por cada particion y otro para copiar el mbr (por el lilo) o se puede realizar por medio de un solo comando dd. Muchas gracias de antemano. Un saludo. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Postgresql
Victor, ha escrito: Aupa, alguien sabe como se puede ejecutar un script en postgresql?, mi intencion es crear la BD teniendo las instrucciones en un fichero de texto o algo similar, gracias a tod=s y un saludo. Mas que un script, es el comando. En linea de comandos escribes: pslq nombre_base_datos -f fichero_sql Esta es la forma si tienes creada la base de datos, si la creas en el fichero de texto en sql, no lo he usado pero creo que funcion y puedes omitir ese parametro. Espero que te ayude. Un saludo. José Luis Pérez -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[OT] configurar mail() php
Perdonar este OFF TOPIC pero no se como solucionar este problema: Tengo dos servidores linux uno web (apache+php) y el otro de correo (postfix), el problema esta cuando quiero utilizar la funcion mail() en php, ya que no ningun gestor de correo (sendmail, qmail ...), y lo que desearia seria utilizar el otro servidor. Agradeceria la posible ayuda o donde encontrar informacion para solucionar mi problema. Un saludo, gracias y perdonar.
configurar raton para X
Tengo un Genius NetMouse Pro en la COM 1 y en el XF86Setup no consigo configurarlo, el dispositivo /etc/mouse no existe. Un saludo.