Hola.
He estado probando el kernel 2.6.3 y no me funciona el mouse. Parece que
el kernel no lo reconoce. Que puede ser? En 2.4 funcionia de maravillas.
Adjunto mi dmesg.
Salu2
Andres
Linux version 2.6.3-1-k7 ([EMAIL PROTECTED]) (gcc version 3.3.2 (Debian)) #2
Tue Feb 24 20:39:50 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: - 0009f000 (usable)
BIOS-e820: 0009f000 - 0010 (reserved)
BIOS-e820: 0010 - 0fff (usable)
BIOS-e820: 0fff - 0000 (ACPI data)
BIOS-e820: 0000 - 1000 (ACPI NVS)
BIOS-e820: fff8 - 0001 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux2.6 root=307 acpi=off
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 849.764 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 251672k/262080k available (1492k kernel code, 9672k reserved, 625k
data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1675.26 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4572k freed
CPU: After generic identify, caps: 0383fbff c1c7fbff
CPU: After vendor identify, caps: 0383fbff c1c7fbff
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c7fbff 0020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Duron(tm) Processor stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector:
ESR value after enabling vector:
Using local APIC timer interrupts.
calibrating APIC timer ...
. CPU clock speed is 849.0978 MHz.
. host bus clock speed is 199.0995 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd8b0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040116
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7c50
PnPBIOS: PnP BIOS version 1.0, entry 0xf:0xa616, dseg 0x400
spurious 8259A interrupt: IRQ7.
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x8000-0x803f has been reserved
pnp: 00:0a: ioport range 0x8040-0x804f has been reserved
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Address space collision on region 7 of bridge :00:06.0 [8000:803f]
PCI: Address space collision on region 8 of bridge :00:06.0 [8040:805f]
PCI: Using IRQ router ALI [10b9/1533] at :00:07.0
PCI: IRQ 0 for device :00:08.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 5 for device :00:08.0
PCI: Sharing IRQ 5 with :00:08.1
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
Machine check exception polling timer started.
VFS: Disk quotas dquot_6.5.1
devfs: v1.22 (20021013) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 256 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
PM: Resume from disk failed.
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4572 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\
