Re: kablosuzu çalıştırmak

2008-06-25 Başlik ozan ay

Herkese yardımları için çok ama çok teşekurler.


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]



Re: kablosuzu çalıştırmak

2008-06-25 Başlik ozan ay
Sayın Murat Demirten dedigi gibi lib/firmware dosyasına 
/usr/lib/hotblug/firmware yuklemiş oldugum  ipw2100 firmware dosyasını 
tasıdım ve

simdiki cıktım.

debian:/home/ozan# iwlist scanning
loInterface doesn't support scanning.

eth1  Interface doesn't support scanning.

eth0  Interface doesn't support scanning.

eth2  Scan completed :
 Cell 01 - Address: 00:12:BF:5F:F3:FA
   ESSID:"EV"
   Protocol:IEEE 802.11bg
   Mode:Master
   Channel:1
   Encryption key:on
   Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
 11 Mb/s; 12 Mb/s; 18 Mb/s; 22 Mb/s; 24 Mb/s
 36 Mb/s; 48 Mb/s; 54 Mb/s
   Quality:89  Signal level:0  Noise level:0
   Extra: Last beacon: 440ms ago

sit0  Interface doesn't support scanning.



Firmware dosyalarını /lib/firmware dizini altına kopyaladıktan sonra 
modülü yüklemeyi deneyin.


dmesg çıktısında büyük olasılıkla kartın tanındığını göreceksiniz.

2008/6/25 ozan ay <[EMAIL PROTECTED] >:

Bu arada ben firmware dosyasını acıp /usr/lib/hotblug/firmware
bolumune koydum. yukledigim   firmware ipw2100-fw-1.3 dosyasıdır.



ozan ay yazmış:

debian:/home/ozan# iwlist scanning
loInterface doesn't support scanning.

eth1  Interface doesn't support scanning.

eth0  Interface doesn't support scanning.

sit0  Interface doesn't support scanning.

dmesg dıktısı

ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100: eth2: Firmware 'ipw2100-1.3.fw' not available or load
failed.
ipw2100: eth2: ipw2100_get_firmware failed: -2
ipw2100: eth2: Failed to power on the adapter.
ipw2100: eth2: Failed to start the firmware.
ipw2100Error calling register_netdev.
ACPI: PCI interrupt for device :02:0a.0 disabled
ipw2100: probe of :02:0a.0 failed with error -5





No virus found in this incoming message.
Checked by AVG. Version: 8.0.101 / Virus Database:
270.4.1/1518 - Release Date: 25.06.2008 09:46
 




-- 
To UNSUBSCRIBE, email to

[EMAIL PROTECTED]

with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED] 






No virus found in this incoming message.
Checked by AVG. 
Version: 8.0.101 / Virus Database: 270.4.1/1518 - Release Date: 25.06.2008 09:46
  



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]



Re: kablosuzu çal?s,t?rmak

2008-06-25 Başlik ozan ay

debian:/home/ozan# apt-get install hotplug
Reading package lists... Done
Building dependency tree... Done
Suggested packages:
ifrename
The following packages will be REMOVED:
gnome-desktop-environment gnome-power-manager gnome-volume-manager hal
initramfs-tools linux-image-2.6.18-6-686 network-manager
network-manager-gnome udev update-notifier
The following NEW packages will be installed:
hotplug
0 upgraded, 1 newly installed, 10 to remove and 0 not upgraded.
Need to get 67,3kB of archives.
After unpacking 56,4MB disk space will be freed.
Do you want to continue [Y/n]?




/usr/lib/hotplug/firmware altina hotplug yuklemeden koymanizin bir 
anlami olmamasi gerektigini dusunuyorum.


Benzer durumla ben de karsilasmistim hotplug yukleme sirasinda sadece 
kerneli guncellemisti onun disinda bir degisiklik yaptigini 
hatirlamiyorum ardindan firmware'i /usr/lib/hotplug/firmwar altina 
yerlestirince calismaya baslamisti.Suan bir problem olmadan hala 
calisiyor.


Peki yuklemek istediginizde,neleri kaldirmak istiyor onun ciktisini 
gonderbilir misiniz ? En azindan bir fikrimiz olur bu konuda.




--
Iyi calismalar.Basarilar...
Semih Gokalp
Istanbul/Turkiye



No virus found in this incoming message.
Checked by AVG. 
Version: 8.0.101 / Virus Database: 270.4.1/1518 - Release Date: 25.06.2008 09:46
  



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]



Re: kablosuzu çalıştırmak

2008-06-25 Başlik Semih Gokalp
/usr/lib/hotplug/firmware altina hotplug yuklemeden koymanizin bir anlami
olmamasi gerektigini dusunuyorum.

Benzer durumla ben de karsilasmistim hotplug yukleme sirasinda sadece
kerneli guncellemisti onun disinda bir degisiklik yaptigini hatirlamiyorum
ardindan firmware'i /usr/lib/hotplug/firmwar altina yerlestirince calismaya
baslamisti.Suan bir problem olmadan hala calisiyor.

Peki yuklemek istediginizde,neleri kaldirmak istiyor onun ciktisini
gonderbilir misiniz ? En azindan bir fikrimiz olur bu konuda.



-- 
Iyi calismalar.Basarilar...
Semih Gokalp
Istanbul/Turkiye


Re: kablosuzu çalıştırmak

2008-06-25 Başlik Murat Demirten
Firmware dosyalarını /lib/firmware dizini altına kopyaladıktan sonra modülü
yüklemeyi deneyin.

dmesg çıktısında büyük olasılıkla kartın tanındığını göreceksiniz.

2008/6/25 ozan ay <[EMAIL PROTECTED]>:

> Bu arada ben firmware dosyasını acıp /usr/lib/hotblug/firmware bolumune
> koydum. yukledigim   firmware ipw2100-fw-1.3 dosyasıdır.
>
>
>
> ozan ay yazmış:
>
>> debian:/home/ozan# iwlist scanning
>> loInterface doesn't support scanning.
>>
>> eth1  Interface doesn't support scanning.
>>
>> eth0  Interface doesn't support scanning.
>>
>> sit0  Interface doesn't support scanning.
>>
>> dmesg dıktısı
>>
>> ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
>> ipw2100: eth2: Firmware 'ipw2100-1.3.fw' not available or load failed.
>> ipw2100: eth2: ipw2100_get_firmware failed: -2
>> ipw2100: eth2: Failed to power on the adapter.
>> ipw2100: eth2: Failed to start the firmware.
>> ipw2100Error calling register_netdev.
>> ACPI: PCI interrupt for device :02:0a.0 disabled
>> ipw2100: probe of :02:0a.0 failed with error -5
>>
>>
>> 
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG. Version: 8.0.101 / Virus Database: 270.4.1/1518 - Release
>> Date: 25.06.2008 09:46
>>
>>
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact
> [EMAIL PROTECTED]
>
>


Re: kablosuzu çalıştırmak

2008-06-25 Başlik ozan ay
Bu arada ben firmware dosyasını acıp /usr/lib/hotblug/firmware bolumune 
koydum. yukledigim   firmware ipw2100-fw-1.3 dosyasıdır.




ozan ay yazmış:

debian:/home/ozan# iwlist scanning
loInterface doesn't support scanning.

eth1  Interface doesn't support scanning.

eth0  Interface doesn't support scanning.

sit0  Interface doesn't support scanning.

dmesg dıktısı

ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100: eth2: Firmware 'ipw2100-1.3.fw' not available or load failed.
ipw2100: eth2: ipw2100_get_firmware failed: -2
ipw2100: eth2: Failed to power on the adapter.
ipw2100: eth2: Failed to start the firmware.
ipw2100Error calling register_netdev.
ACPI: PCI interrupt for device :02:0a.0 disabled
ipw2100: probe of :02:0a.0 failed with error -5





No virus found in this incoming message.
Checked by AVG. 
Version: 8.0.101 / Virus Database: 270.4.1/1518 - Release Date: 25.06.2008 09:46
  



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]



Re: kablosuzu çalıştırmak

2008-06-25 Başlik ozan ay

debian:/home/ozan# iwlist scanning
loInterface doesn't support scanning.

eth1  Interface doesn't support scanning.

eth0  Interface doesn't support scanning.

sit0  Interface doesn't support scanning.

dmesg dıktısı

ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100: eth2: Firmware 'ipw2100-1.3.fw' not available or load failed.
ipw2100: eth2: ipw2100_get_firmware failed: -2
ipw2100: eth2: Failed to power on the adapter.
ipw2100: eth2: Failed to start the firmware.
ipw2100Error calling register_netdev.
ACPI: PCI interrupt for device :02:0a.0 disabled
ipw2100: probe of :02:0a.0 failed with error -5


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]



Re: kablosuzu çalıştırmak

2008-06-25 Başlik Doruk Fisek
Wed, 25 Jun 2008 16:51:29 +0300, ozan ay <[EMAIL PROTECTED]> :

> Dediginiz gibi modprobe ipw2100 yaptım hata almadım şu komutu verdim
...
> kablosuz calısmıyor. Onerebileceginiz bir komut var mı neler
> yapmalıyım.
modprobe ipw2100 komutu hata vermedikten sonra dmesg komutunun son
satirlarina bakarsaniz orada ne oldugu ile ilgili bilgi bulabilirsiniz.

   Doruk

--
FISEK ENSTITUSU - http://www.fisek.com.tr


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]



Re: kablosuzu çalıştırmak

2008-06-25 Başlik ozan ay

Dediginiz gibi modprobe ipw2100 yaptım hata almadım şu komutu verdim
debian:/home/ozan# iwlist scanning
loInterface doesn't support scanning.

eth1  Interface doesn't support scanning.

eth0  Interface doesn't support scanning.

sit0  Interface doesn't support scanning.

kablosuz calısmıyor. Onerebileceginiz bir komut var mı neler yapmalıyım.


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]