Bug#420402: Getting a better backtrace.
Hello: That backtrace doesn't seem very meaningful, maybe using a core dump backtrace would be better. Try to enable core dump and then get the backtrace from there. http://wiki.debian.org/XStrikeForce/XserverDebugging has some tips. Thanks -- Raúl Sánchez Siles -Proud Debian user- Linux registered user #416098 pgptD6CM5dXek.pgp Description: PGP signature
Bug#421697: ATI Radeon x300 doesn't work anymore after upgrade
Florian Weimer wrote: Package: xserver-xorg-core Version: 2:1.3.0.0.dfsg-3 When upgrading from xserver-xorg-core 2:1.1.1-21, the screen remains blank. Log file is attached. Switching back to the console is possible, but the screen remains blank. This happens with and without an xorg.conf. (II) LoadModule: ati (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so (II) Module ati: vendor=X.Org Foundation compiled for 7.1.1, module version = 6.6.3 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 1.0 Hi Florian, Could you try with the ATI driver currently in experimental (6.6.191)? Also, what kind of monitors do you have plugged to this ATI board? There are a couple known breakages related to the new xserver-xorg-core since the ATI driver needs a little bit of update. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#375553: xserver-xorg: Server freezes switching to console and back
Nicola Girardi wrote: The problem persists. Example: I log into tty1 and then I start X in the background: $ startx /dev/null At some point I go back to tty1 and open, say, mutt: $ mutt Then I read mails and go back to X. Suppose I go back to tty1 and find new mail. After reading I go back to X once again, and I find that the only window I can do something on is the one that was active before going back to tty1 the last time. After closing it, everything is frozen. This is just an example. From my experience, I conjecture that if something happens in the console from which I start X, while I'm on X, then switching to the console and then to X freezes X. In fact, I work this problem around like this: Log into some far away console, /dev/tty10, start X in the foreground: $ startx and never come back to it do do any operation. (Switching to tty10 to see what's going on there, error messages and so on, is fine.) Hope this helps, if you need more information, just let me know. Ok thanks, which driver do you have installed? I guess it's xserver-xorg-video-sis 1:0.9.1-4? The latest upstream release is currently in experimental (xserver-xorg-video-sis 1:0.9.3-1), so it would be good to test it. However, the changelog is pretty small so there are few chances your problem gets fixed. At least, once we know the problem occurs with the latest upstream, we will be able to forward this bug upstream at bugzilla.freedesktop.org. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421418: Please provide the chipset info.
Hello: Please, could you be so kind to provide the chipset info. You have two options: the already suggested by Brice: /usr/share/bug/xserver-xorg-core/script 31 and send the output or alternatively send: lspci |grep VGA If you chipset is and intel 855GM I suggest to merge this bug with http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=417860 as I think they are the same. Thanks -- Raúl Sánchez Siles -Proud Debian user- Linux registered user #416098 pgpXA43TLsgLT.pgp Description: PGP signature
Bug#421748: [l10n:ro] Romanian translation of the po-debconf templates of xdm
Package: xdm Severity: minor Tags: patch l10n Please include the attached translation in the next release of the package. (This was supposed to be sent on the 16th of April but I forgot about it). Original Message Subject: [RFR2] po-debconf://xdm Date: Thu, 05 Apr 2007 11:35:12 +0300 From: Eddy Petrișor [EMAIL PROTECTED] To: debian-l10n-romanian [EMAIL PROTECTED] References: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] -- Regards, EddyP = Imagination is more important than knowledge A.Einstein # translation of ro.po to Romanian # debconf templates for xorg-x11 package # # $Id: pothead.in 189 2005-06-11 00:04:27Z branden $ # # Copyright: # # This file is distributed under the same license as the xorg-x11 package. # Please see debian/copyright. # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf is available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # # Branden Robinson, 2000--2004. # Eddy PetriÅor [EMAIL PROTECTED], 2005. # RuÅeÅ£ Zeno [EMAIL PROTECTED], 2005. # Eddy Petrisor [EMAIL PROTECTED], 2005. # Eddy PetriÈor [EMAIL PROTECTED], 2007. msgid msgstr Project-Id-Version: ro\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2007-03-22 06:38+0100\n PO-Revision-Date: 2007-03-24 16:16+0200\n Last-Translator: Eddy PetriÈor [EMAIL PROTECTED]\n Language-Team: Romanian [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Generator: KBabel 1.11.4\n Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 0 n%100 20)) ? 1 : 2;\n #. Type: select #. Description #: ../xdm.templates:1001 msgid Default display manager: msgstr Managerul de ecran implicit: #. Type: select #. Description #: ../xdm.templates:1001 msgid A display manager is a program that provides graphical login capabilities for the X Window System. msgstr Un manager de ecran este un program care oferÄ facilitatea de autentificare graficÄ sistemului de ferestre X. #. Type: select #. Description #: ../xdm.templates:1001 msgid Only one display manager can manage a given X server, but multiple display manager packages are installed. Please select which display manager should run by default. msgstr Doar un singur manager de ecran poate gestiona un anumit server X, dar acum sunt instalaÅ£i mai mulÅ£i. SelectaÅ£i managerul care ar trebui sÄ porneascÄ Ã®n mod implicit. #. Type: select #. Description #: ../xdm.templates:1001 msgid Multiple display managers can run simultaneously if they are configured to manage different servers; to achieve this, configure the display managers accordingly, edit each of their init scripts in /etc/init.d, and disable the check for a default display manager. msgstr Mai mulÅ£i manageri de ecran pot rula simultan dacÄ sunt configuraÅ£i sÄ gestioneze servere diferite; pentru a obÅ£ine acest lucru, configuraÅ£i managerii de ecran în mod corespunzÄtor, editaÅ£i fiecare dintre script-urile lor de iniÅ£ializare din /etc/init.d Åi dezactivaÅ£i testul legat de managerul de ecran implicit. #. Type: boolean #. Description #: ../xdm.templates:3001 msgid Stop the xdm daemon? msgstr Se opreÅte serviciul xdm? #. Type: boolean #. Description #: ../xdm.templates:3001 msgid The X display manager (xdm) daemon is typically stopped on package upgrade and removal, but it appears to be managing at least one running X session. msgstr Serviciul de management al ecranului X (xdm) este, în mod obiÅnuit, oprit la înnoirea sau Återgerea pachetului, dar acum se pare cÄ acesta gestioneazÄ cel puÅ£in o sesiune X. #. Type: boolean #. Description #: ../xdm.templates:3001 msgid If xdm is stopped now, any X sessions it manages will be terminated. Otherwise, the new version will take effect the next time the daemon is restarted. msgstr DacÄ xdm este oprit acum, orice sesiune X gestionatÄ de el va fi terminatÄ. Altfel, noua versiune va avea efect la urmÄtoarea repornire a serviciului. signature.asc Description: OpenPGP digital signature
xserver-xorg-video-sisusb: Changes to 'debian-unstable'
.cvsignore| 19 aclocal.m4| 147 +++- autogen.sh| 12 config.guess | 685 - config.h.in |9 config.sub| 240 +-- configure | 1571 +- debian/changelog | 21 debian/control| 14 debian/rules |4 debian/xsfbs/xsfbs.mk | 28 ltmain.sh | 12 man/.cvsignore|2 man/Makefile.am |2 man/Makefile.in |2 man/sisusb.man|2 mkinstalldirs | 89 ++ src/.cvsignore|6 src/sisusb_accel.c|2 src/sisusb_accel.h|2 src/sisusb_cursor.c |2 src/sisusb_cursor.h |2 src/sisusb_dac.c |2 src/sisusb_dac.h |2 src/sisusb_driver.c |2 src/sisusb_driver.h |2 src/sisusb_init.c |2 src/sisusb_init.h |2 src/sisusb_opt.c |2 src/sisusb_osdef.h|2 src/sisusb_regs.h |2 src/sisusb_setup.c|2 src/sisusb_shadow.c |2 src/sisusb_struct.h |2 src/sisusb_types.h|2 src/sisusb_utility.c |2 src/sisusb_vga.c |2 src/sisusb_video.c|2 src/sisusb_video.h|2 src/sisusb_videostr.h |2 40 files changed, 1304 insertions(+), 1605 deletions(-) New commits: commit 877f55bddc9acbe47e317f05ab07711d878fed20 Author: Brice Goglin [EMAIL PROTECTED] Date: Tue May 1 12:40:49 2007 +0200 autoreconf diff --git a/config.guess b/config.guess index 396482d..0f0fe71 100755 --- a/config.guess +++ b/config.guess @@ -4,7 +4,7 @@ # 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, # Inc. -timestamp='2006-07-02' +timestamp='2007-03-06' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -161,6 +161,7 @@ case ${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION} in arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched @@ -780,7 +781,7 @@ EOF i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; -i*:MINGW*:*) +*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) @@ -790,12 +791,15 @@ EOF i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; -x86:Interix*:[3456]*) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; -EM64T:Interix*:[3456]*) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; +*:Interix*:[3456]*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T | authenticamd) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; @@ -950,6 +954,9 @@ EOF x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; +xtensa:Linux:*:*) + echo xtensa-unknown-linux-gnu + exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent @@ -1208,6 +1215,15 @@ EOF SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; +SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; +SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; +SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; diff --git a/config.sub b/config.sub index fab0aa3..5defff6 100755 --- a/config.sub +++ b/config.sub @@ -4,7 +4,7 @@ # 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, # Inc. -timestamp='2006-09-20' +timestamp='2007-01-18' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -245,12 +245,12 @@ case $basic_machine in | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ - | fr30 | frv \ + | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore \ + | maxq | mb | microblaze | mcore | mep \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \
xserver-xorg-video-tdfx: Changes to 'debian-unstable'
.cvsignore| 19 ChangeLog | 390 +++- Makefile.in |4 aclocal.m4| 306 +++--- autogen.sh| 12 config.guess | 47 + config.h.in |9 config.sub| 68 +- configure | 1524 +- debian/changelog | 20 debian/control| 14 debian/rules |4 debian/xsfbs/xsfbs.mk | 28 man/.cvsignore|2 man/Makefile.in |6 mkinstalldirs | 89 ++ src/.cvsignore|6 src/Makefile.in |6 18 files changed, 1239 insertions(+), 1315 deletions(-) New commits: commit 8585c9ddc9fb33664915d32b7b2bad783476a9be Author: Brice Goglin [EMAIL PROTECTED] Date: Tue May 1 12:50:00 2007 +0200 Update upstream ChangeLog diff --git a/ChangeLog b/ChangeLog index 2562102..73076ca 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,76 +1,364 @@ -2006-06-17 Donnie Berkholz [EMAIL PROTECTED] +commit c5b95a8d219dd4ef25c6aa14f44b70865d1a8be7 +Author: Alex Deucher [EMAIL PROTECTED](none) +Date: Wed Nov 22 12:15:48 2006 -0500 - * src/tdfx_priv.c: (TDFXResetFifo), (TDFXSyncFifo): - Bug #7149 https://bugs.freedesktop.org/show_bug.cgi?id=7149 - Change use of getsecs to xf86getsecs (Gustavo Pichorim Boiko). +bump to 1.3.0 for release -2006-04-07 Adam Jackson [EMAIL PROTECTED] +commit 4f76e63ac4f7beb802561807554b64386a22b6e1 +Author: Alex Deucher [EMAIL PROTECTED](none) +Date: Wed Nov 22 12:12:06 2006 -0500 - * configure.ac: - * src/tdfx.h: - Bump to 1.2.1 for Xv changes. +bump to 1.3.0 for release. -2006-04-07 Aaron Plattner [EMAIL PROTECTED] +commit cd0808bd2dc6c77557e0691579a6119f8901adf6 +Author: Alex Deucher [EMAIL PROTECTED](none) +Date: Wed Nov 22 11:44:48 2006 -0500 - * src/tdfx_video.c: (TDFXPutImageTexture), (TDFXPutImageOverlay): - Add a DrawablePtr argument to the XV functions to pave the way for - redirected video. +Fix locking in tdfx driver. Fixes bug 9032. -2006-04-07 Adam Jackson [EMAIL PROTECTED] +commit 867f0a956a3240466347e0ee17d7518740835048 +Author: Adam Jackson [EMAIL PROTECTED] +Date: Fri Oct 13 18:45:16 2006 -0400 - * configure.ac: - * src/tdfx.h: - * src/tdfx_accel.c: - * src/tdfx_dga.c: - * src/tdfx_dri.c: - * src/tdfx_driver.c: - * src/tdfx_hwcurs.c: - * src/tdfx_io.c: - * src/tdfx_priv.c: - * src/tdfx_sli.c: - Unlibcwrap. Bump server version requirement. Bump to 1.2.0. +Bump to 1.2.2 -2005-12-20 Kevin E. Martin kem-at-freedesktop-dot-org +commit de5adbae146a4db8ee491a9387f65284ea919ff9 +Author: Donnie Berkholz [EMAIL PROTECTED] +Date: Sat Jun 17 16:35:04 2006 + - * configure.ac: - Update package version for X11R7 release. +Bug #7149 https://bugs.freedesktop.org/show_bug.cgi?id=7149 Change use of +getsecs to xf86getsecs (Gustavo Pichorim Boiko). -2005-12-14 Kevin E. Martin kem-at-freedesktop-dot-org +commit acee015839a798546a9d17fdc31e443b10630c76 +Author: Adam Jackson [EMAIL PROTECTED] +Date: Sat Apr 8 01:50:08 2006 + - * configure.ac: - Update package version number for final X11R7 release candidate. +Bump to 1.2.1 for Xv changes. -2005-12-06 Kevin E. Martin kem-at-freedesktop-dot-org +commit 55954625ff815b932d365422864745b31c4eadb4 +Author: Aaron Plattner [EMAIL PROTECTED] +Date: Fri Apr 7 23:15:56 2006 + - * man/Makefile.am: - Change *man_SOURCES == *man_PRE to fix autotools warnings. +Add a DrawablePtr argument to the XV functions to pave the way for +redirected video. -2005-12-03 Kevin E. Martin kem-at-freedesktop-dot-org +commit e8c71c95ea67e5db17eeabaac9907924099e164f +Author: Adam Jackson [EMAIL PROTECTED] +Date: Fri Apr 7 21:37:49 2006 + - * configure.ac: - Update package version number for X11R7 RC3 release. +Unlibcwrap. Bump server version requirement. Bump to 1.2.0. -2005-12-01 Kevin E. Martin kem-at-freedesktop-dot-org +commit 8cfc6971a58e03894040c4f4f74da4734897df16 +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Wed Dec 21 02:30:03 2005 + - * configure.ac: - Remove extraneous AC_MSG_RESULT. +Update package version for X11R7 release. -2005-11-20 Adam Jackson [EMAIL PROTECTED] +commit 5300267cfe87b18139a95ec555f8d43cc1465669 +Author: Adam Jackson [EMAIL PROTECTED] +Date: Mon Dec 19 16:25:55 2005 + - * configure.ac: - Bump libdrm dep to 2.0. +Stub COPYING files -2005-11-29 Adam Jackson [EMAIL PROTECTED] +commit c3882fb9c050d4a4b3d8bb6bff712cb9143ae97c +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Thu Dec 15 00:24:20 2005 + - * configure.ac: - Only build dlloader modules by default. +Update package version number for final X11R7 release candidate. -2005-11-09 Kevin E. Martin
Bug#420532: xserver-xorg-input-evdev: Acecad USB Tablet misconfigured by evdev in X, but correctly configured by kernel
Hi Giuseppe, This evdev bug has been marked as fixed-upstream because upstream thinks it has been fixed for a while (see https://bugs.freedesktop.org/show_bug.cgi?id=2758). So the fix should be in 1.1.5. Could you try the xserver-xorg-input-evdev currently in experimental (1:1.1.5-1) ? Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421772: xserver-xorg: EDID takes precedance over DisplaySize
Package: xserver-xorg Version: 1:7.1.0-18 Severity: normal Today I found that the EDID values are used instead of the values from the DisplaySize directive in xorg.conf. That's not how it used to be. Passing a -dpi argument to the server still overrides everything. -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /etc/X11/X target unchanged from checksum in /var/lib/x11/X.md5sum. X server symlink status: lrwxrwxrwx 1 root root 13 2006-06-03 18:40 /etc/X11/X - /usr/bin/Xorg -rwxr-xr-x 1 root root 1707984 2007-03-27 08:09 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] (rev 15) /etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum. Xorg X server configuration file status: -rw-r--r-- 1 root root 3139 2007-05-01 13:13 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type man /etc/X11/xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section Files FontPath/usr/share/fonts/X11/misc FontPath/usr/X11R6/lib/X11/fonts/misc FontPath/usr/share/fonts/X11/cyrillic FontPath/usr/X11R6/lib/X11/fonts/cyrillic FontPath/usr/share/fonts/X11/100dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/100dpi/:unscaled FontPath/usr/share/fonts/X11/75dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/75dpi/:unscaled FontPath/usr/share/fonts/X11/Type1 FontPath/usr/X11R6/lib/X11/fonts/Type1 FontPath/usr/share/fonts/X11/100dpi FontPath/usr/X11R6/lib/X11/fonts/100dpi FontPath/usr/share/fonts/X11/75dpi FontPath/usr/X11R6/lib/X11/fonts/75dpi # path to defoma fonts FontPath/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType #Skoj FontPath/usr/local/share/fonts/Type1/adobe/frutiger FontPath/usr/local/share/fonts/Type1/adobe/agaramond EndSection Section Module Loaddbe Loadddc Loadextmod Loadfreetype Loadglx Loadint10 Loadvbe EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRules xorg Option XkbModel pc105 Option XkbLayout se EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/input/mice Option Protocol ExplorerPS/2 EndSection Section Device Identifier nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] Driver nv BusID PCI:1:0:0 EndSection Section Monitor Identifier StudioWorks Option DPMS HorizSync 30-70 VertRefresh 50-160 Gamma 1.07 1.136 1.1 DisplaySize 325 244 EndSection Section Screen Identifier Default Screen Device nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] Monitor StudioWorks DefaultDepth24 SubSection Display Depth 1 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 4 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 8 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 15 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 16 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 24 Modes 1024x768 800x600 640x480 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default Screen InputDevice Generic Keyboard InputDevice Configured Mouse EndSection
Processed: Re: Bug#421772: xserver-xorg: EDID takes precedance over DisplaySize
Processing commands for [EMAIL PROTECTED]: reassign 421772 xserver-xorg-core Bug#421772: xserver-xorg: EDID takes precedance over DisplaySize Bug reassigned from package `xserver-xorg' to `xserver-xorg-core'. found 421772 2:1.2.99.903-1 Bug#421772: xserver-xorg: EDID takes precedance over DisplaySize Bug marked as found in version 2:1.2.99.903-1. thank you Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421772: xserver-xorg: EDID takes precedance over DisplaySize
reassign 421772 xserver-xorg-core found 421772 2:1.2.99.903-1 thank you Vincent Lönngren wrote: Today I found that the EDID values are used instead of the values from the DisplaySize directive in xorg.conf. That's not how it used to be. Passing a -dpi argument to the server still overrides everything. [...] ii xserver-xorg-core 2:1.2.99.903-1 X.Org X server -- core server You appear to be running a release candidate Xserver (1.2.99.903 is 1.3-rc3), is there any chance you try with the final release, aka xserver-xorg-core currently in unstable (2:1.3.0.0.dfsg-3)? Thanks, Brice
xserver-xorg-video-sunbw2: Changes to 'upstream-unstable'
man/sunbw2.man |6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) New commits: commit 4b97b50a48eb0b3a978d7d4fb082e07f51363953 Author: Alan Coopersmith [EMAIL PROTECTED] Date: Thu Mar 1 10:57:05 2007 -0800 Replace references to XFree86/XF86Config in man page diff --git a/man/sunbw2.man b/man/sunbw2.man index ac05ccf..953598f 100644 --- a/man/sunbw2.man +++ b/man/sunbw2.man @@ -14,17 +14,17 @@ sunbw2 \- BW2 video driver .fi .SH DESCRIPTION .B sunbw2 -is an XFree86 driver for Sun BW2 video cards. +is an __xservername__ driver for Sun BW2 video cards. THIS MAN PAGE NEEDS TO BE FILLED IN. .SH SUPPORTED HARDWARE The .B sunbw2 driver supports... .SH CONFIGURATION DETAILS -Please refer to XF86Config(__filemansuffix__) for general configuration +Please refer to __xconfigfile__(__filemansuffix__) for general configuration details. This section only covers configuration details specific to this driver. .SH SEE ALSO -XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) +__xservername__(1), __xconfigfile__(__filemansuffix__), xorgconfig(1), Xserver(1), X(__miscmansuffix__) .SH AUTHORS Authors include: Jakub Jelinek [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xserver-xorg-video-sunbw2: Changes to 'debian-unstable'
.cvsignore| 19 ChangeLog | 218 + Makefile.in | 12 aclocal.m4| 379 +- autogen.sh| 12 config.guess | 685 ++-- config.h.in |9 config.sub| 240 + configure | 7759 ++ debian/changelog | 23 debian/control| 14 debian/rules |4 debian/xsfbs/xsfbs.mk | 21 ltmain.sh | 12 man/.cvsignore|2 man/Makefile.am |2 man/Makefile.in | 14 man/sunbw2.man|4 src/.cvsignore|6 src/Makefile.in | 12 20 files changed, 5258 insertions(+), 4189 deletions(-) New commits: commit 61ceeb1de7a0d34ed9eae9f91600af7670bc7ca6 Author: Brice Goglin [EMAIL PROTECTED] Date: Tue May 1 13:52:10 2007 +0200 autoreconf diff --git a/config.guess b/config.guess index 396482d..0f0fe71 100755 --- a/config.guess +++ b/config.guess @@ -4,7 +4,7 @@ # 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, # Inc. -timestamp='2006-07-02' +timestamp='2007-03-06' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -161,6 +161,7 @@ case ${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION} in arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched @@ -780,7 +781,7 @@ EOF i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; -i*:MINGW*:*) +*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) @@ -790,12 +791,15 @@ EOF i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; -x86:Interix*:[3456]*) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; -EM64T:Interix*:[3456]*) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; +*:Interix*:[3456]*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T | authenticamd) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; @@ -950,6 +954,9 @@ EOF x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; +xtensa:Linux:*:*) + echo xtensa-unknown-linux-gnu + exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent @@ -1208,6 +1215,15 @@ EOF SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; +SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; +SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; +SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; diff --git a/config.sub b/config.sub index fab0aa3..5defff6 100755 --- a/config.sub +++ b/config.sub @@ -4,7 +4,7 @@ # 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, # Inc. -timestamp='2006-09-20' +timestamp='2007-01-18' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -245,12 +245,12 @@ case $basic_machine in | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ - | fr30 | frv \ + | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore \ + | maxq | mb | microblaze | mcore | mep \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ @@ -324,7 +324,7 @@ case $basic_machine in | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ - | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ @@ -925,6 +925,9 @@ case $basic_machine in basic_machine=sh-hitachi os=-hms ;; + sh5el) + basic_machine=sh5le-unknown + ;;
xserver-xorg-video-sunbw2: Changes to 'debian-unstable'
debian/xsfbs/xsfbs.mk |9 - 1 files changed, 4 insertions(+), 5 deletions(-) New commits: commit 271778bd6338575afa3e4ae7f614f38cdff8e2fb Author: Branden Robinson [EMAIL PROTECTED](none) Date: Thu Apr 12 23:18:32 2007 -0400 Test for existence of debian/patches directory before creating a symlink to it. This prevents packages that apply no patches from ending up with a broken symlink in them. Remove SVN keyword. Update copyright notice. diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk index d88c6db..63dde45 100755 --- a/debian/xsfbs/xsfbs.mk +++ b/debian/xsfbs/xsfbs.mk @@ -1,11 +1,10 @@ #!/usr/bin/make -f -# $Id$ -# Debian rules file for xorg-x11 source package +# Debian X Strike Force Build System (XSFBS): Make portion # Copyright 1996 Stephen Early # Copyright 1997 Mark Eichin -# Copyright 1998-2005 Branden Robinson +# Copyright 1998-2005, 2007 Branden Robinson # Copyright 2005 David Nusinow # # Licensed under the GNU General Public License, version 2. See the file @@ -127,7 +126,7 @@ $(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir if [ ! -e $(STAMP_DIR)/log ]; then \ mkdir $(STAMP_DIR)/log; \ fi; \ - if [ ! -e patches ]; then \ + if [ -e debian/patches ] [ ! -e patches ]; then \ ln -s debian/patches patches; \ fi; \ $@ commit 72811b4cede7275a35d36b44bcb5f431a8aa0133 Author: Julien Cristau [EMAIL PROTECTED] Date: Fri Mar 2 20:28:15 2007 +0100 Fix copy/paste typo in the input driver provides. diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk index 0343aec..d88c6db 100755 --- a/debian/xsfbs/xsfbs.mk +++ b/debian/xsfbs/xsfbs.mk @@ -359,7 +359,7 @@ VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2/dev/null) INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2/dev/null) SERVER_DEPENDS = xserver-xorg-core (= $(SERVERMINVERS)) VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI) -INPDRIVER_PROVIDES = xserver-xorg-video-$(INPUTABI) +INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI) ifeq ($(PACKAGE),) PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' debian/control) endif -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xserver-xorg-video-suncg14: Changes to 'debian-unstable'
.cvsignore| 19 ChangeLog | 218 + Makefile.in | 12 aclocal.m4| 379 +- autogen.sh| 12 config.guess | 685 ++-- config.h.in |9 config.sub| 240 + configure | 7799 ++ debian/changelog | 20 debian/control| 14 debian/rules |4 debian/xsfbs/xsfbs.mk | 28 ltmain.sh | 12 man/.cvsignore|3 man/Makefile.am |2 man/Makefile.in | 14 man/suncg14.man |4 src/.cvsignore|6 src/Makefile.in | 12 20 files changed, 5277 insertions(+), 4215 deletions(-) New commits: commit 82911f8581613c96b32d126643aa01e5892c0dc3 Author: Brice Goglin [EMAIL PROTECTED] Date: Tue May 1 14:00:49 2007 +0200 Pull upstream manpage fix e37c03efea954f675961f2b1babbfb0787f4d3c9 diff --git a/ChangeLog b/ChangeLog index c09fb82..cd27cca 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,46 +1,206 @@ -2006-04-07 Adam Jackson [EMAIL PROTECTED] +commit e37c03efea954f675961f2b1babbfb0787f4d3c9 +Author: Alan Coopersmith [EMAIL PROTECTED] +Date: Thu Mar 1 10:58:40 2007 -0800 - * configure.ac: - * src/cg14.h: - * src/cg14_driver.c: - Unlibcwrap. Bump server version requirement. Bump to 1.1.0. +Replace references to XFree86/XF86Config in man page -2005-12-20 Kevin E. Martin kem-at-freedesktop-dot-org +commit 92e60405e69ccfdf522126842e407d7f529916ed +Author: Adam Jackson [EMAIL PROTECTED] +Date: Fri Apr 7 21:17:54 2006 + - * configure.ac: - Update package version for X11R7 release. +Unlibcwrap. Bump server version requirement. Bump to 1.1.0. -2005-12-14 Kevin E. Martin kem-at-freedesktop-dot-org +commit 56c6e7a98584130a3dc5a24e9e20a757dc66f1da +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Wed Dec 21 02:30:03 2005 + - * configure.ac: - Update package version number for final X11R7 release candidate. +Update package version for X11R7 release. -2005-12-06 Kevin E. Martin kem-at-freedesktop-dot-org +commit a02c95d07da11218405ad2dfee3b94bcca714e57 +Author: Adam Jackson [EMAIL PROTECTED] +Date: Mon Dec 19 16:25:55 2005 + - * man/Makefile.am: - Change *man_SOURCES == *man_PRE to fix autotools warnings. +Stub COPYING files -2005-12-03 Kevin E. Martin kem-at-freedesktop-dot-org +commit 77b235178419b120b67c503f2b1aa99735cc6e4d +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Thu Dec 15 00:24:19 2005 + - * configure.ac: - Update package version number for X11R7 RC3 release. +Update package version number for final X11R7 release candidate. -2005-12-01 Kevin E. Martin kem-at-freedesktop-dot-org +commit 6e6e579575b766ee6624c28bd509f20475f5b3d1 +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Tue Dec 6 22:48:38 2005 + - * configure.ac: - Remove extraneous AC_MSG_RESULT. +Change *man_SOURCES == *man_PRE to fix autotools warnings. -2005-11-29 Adam Jackson [EMAIL PROTECTED] +commit 328131ab9088fcee36dff9d6873843a05e2c5227 +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Sat Dec 3 05:49:35 2005 + - * configure.ac: - Only build dlloader modules by default. +Update package version number for X11R7 RC3 release. -2005-11-09 Kevin E. Martin kem-at-freedesktop-dot-org +commit ba42a4d22ad38f9da6bb48519519537fa503afff +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Fri Dec 2 02:16:10 2005 + - * configure.ac: - Update package version number for X11R7 RC2 release. +Remove extraneous AC_MSG_RESULT. -2005-11-01 Kevin E. Martin kem-at-freedesktop-dot-org +commit 1b005e1b684e4196f4356bbaf328fba38142e1d3 +Author: Adam Jackson [EMAIL PROTECTED] +Date: Tue Nov 29 23:30:04 2005 + - * configure.ac: - Update pkgcheck dependencies to work with separate build roots. +Only build dlloader modules by default. + +commit 218bb5a20f59b80e010e0689237526c7947774d8 +Author: Alan Coopersmith [EMAIL PROTECTED] +Date: Mon Nov 28 22:04:12 2005 + + +Change *mandir targets to use new *_MAN_DIR variables set by xorg-macros.m4 +update to fix bug #5167 (Linux prefers *.1x man pages in man1 subdir) + +commit bb2c7a8908722cee021346b7aa297de1daaf7527 +Author: Eric Anholt [EMAIL PROTECTED] +Date: Mon Nov 21 10:49:19 2005 + + +Add .cvsignores for drivers. + +commit 6dcb16d7cea543f4a04da9ffed7620cd6331e927 +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Wed Nov 9 21:15:21 2005 + + +Update package version number for X11R7 RC2 release. + +commit 09e810db3b675a2d111769ed01ba7abf3ad3a8f8 +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Tue Nov 1 15:08:54 2005 + + +Update pkgcheck depedencies to work with separate build roots. + +commit 5fe7461bf3cbfd27f8a190d379a11ca0c506a2ab +Author: Kevin E Martin [EMAIL PROTECTED] +Date:
xserver-xorg-video-suncg14: Changes to 'upstream-unstable'
man/suncg14.man |6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) New commits: commit e37c03efea954f675961f2b1babbfb0787f4d3c9 Author: Alan Coopersmith [EMAIL PROTECTED] Date: Thu Mar 1 10:58:40 2007 -0800 Replace references to XFree86/XF86Config in man page diff --git a/man/suncg14.man b/man/suncg14.man index fa14e1c..04a71a1 100644 --- a/man/suncg14.man +++ b/man/suncg14.man @@ -14,17 +14,17 @@ suncg14 \- CG14 video driver .fi .SH DESCRIPTION .B suncg14 -is an XFree86 driver for Sun CG14 video cards. +is an __xservername__ driver for Sun CG14 video cards. THIS MAN PAGE NEEDS TO BE FILLED IN. .SH SUPPORTED HARDWARE The .B suncg14 driver supports... .SH CONFIGURATION DETAILS -Please refer to XF86Config(__filemansuffix__) for general configuration +Please refer to __xconfigfile__(__filemansuffix__) for general configuration details. This section only covers configuration details specific to this driver. .SH SEE ALSO -XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) +__xservername__(1), __xconfigfile__(__filemansuffix__), xorgconfig(1), Xserver(1), X(__miscmansuffix__) .SH AUTHORS Authors include: Jakub Jelinek [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421772: xserver-xorg: EDID takes precedance over DisplaySize
tis 2007-05-01 klockan 14:05 +0200 skrev Brice Goglin: You appear to be running a release candidate Xserver (1.2.99.903 is 1.3-rc3), is there any chance you try with the final release, aka xserver-xorg-core currently in unstable (2:1.3.0.0.dfsg-3)? Thanks, Brice Ok I just tried it, and the behaviour is the same. -- Vincent Lönngren [EMAIL PROTECTED]
Processed: found 421772 in 2:1.3.0.0.dfsg-3
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.2 found 421772 2:1.3.0.0.dfsg-3 Bug#421772: xserver-xorg: EDID takes precedance over DisplaySize Bug marked as found in version 2:1.3.0.0.dfsg-3. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xserver-xorg-video-suncg3: Changes to 'upstream-unstable'
man/suncg3.man |6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) New commits: commit ba46a263cca120175d5a669f8bec56508560dd03 Author: Alan Coopersmith [EMAIL PROTECTED] Date: Thu Mar 1 11:00:30 2007 -0800 Replace references to XFree86/XF86Config in man page diff --git a/man/suncg3.man b/man/suncg3.man index 8c1c8f1..a4f6bb0 100644 --- a/man/suncg3.man +++ b/man/suncg3.man @@ -14,17 +14,17 @@ suncg3 \- CG3 video driver .fi .SH DESCRIPTION .B suncg3 -is an XFree86 driver for Sun CG3 video cards. +is an __xservername__ driver for Sun CG3 video cards. THIS MAN PAGE NEEDS TO BE FILLED IN. .SH SUPPORTED HARDWARE The .B suncg3 driver supports... .SH CONFIGURATION DETAILS -Please refer to XF86Config(__filemansuffix__) for general configuration +Please refer to __xconfigfile__(__filemansuffix__) for general configuration details. This section only covers configuration details specific to this driver. .SH SEE ALSO -XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) +__xservername__(1), __xconfigfile__(__filemansuffix__), xorgconfig(1), Xserver(1), X(__miscmansuffix__) .SH AUTHORS Authors include: Jakub Jelinek [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xserver-xorg-video-suncg3: Changes to 'debian-unstable'
.cvsignore| 19 ChangeLog | 218 + Makefile.in | 12 aclocal.m4| 379 +- autogen.sh| 12 config.guess | 685 ++-- config.h.in |9 config.sub| 240 + configure | 7799 ++ debian/changelog | 18 debian/control| 14 debian/rules |4 debian/xsfbs/xsfbs.mk | 28 ltmain.sh | 12 man/.cvsignore|3 man/Makefile.am |2 man/Makefile.in | 14 man/suncg3.man|8 src/.cvsignore|6 src/Makefile.in | 12 20 files changed, 5278 insertions(+), 4216 deletions(-) New commits: commit 776d34fdb283e23ca7c81833d555ee0d54f9b1cb Author: Brice Goglin [EMAIL PROTECTED] Date: Tue May 1 14:47:24 2007 +0200 autoreconf diff --git a/Makefile.in b/Makefile.in index 549e9f1..bd3d980 100644 --- a/Makefile.in +++ b/Makefile.in @@ -129,6 +129,7 @@ F77 = @F77@ FFLAGS = @FFLAGS@ FILE_MAN_DIR = @FILE_MAN_DIR@ FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ +GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -163,13 +164,9 @@ STRIP = @STRIP@ VERSION = @VERSION@ XORG_CFLAGS = @XORG_CFLAGS@ XORG_LIBS = @XORG_LIBS@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ @@ -186,24 +183,31 @@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ +htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ +localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ moduledir = @moduledir@ oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ +psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ diff --git a/aclocal.m4 b/aclocal.m4 index aaed1b9..aaae5ad 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -13,7 +13,7 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# serial 48 AC_PROG_LIBTOOL +# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) @@ -1397,18 +1397,6 @@ freebsd1*) dynamic_linker=no ;; -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. @@ -1564,7 +1552,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux*) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -1578,27 +1566,10 @@ linux*) # before this can be enabled. hardcode_into_libs=yes - # find out which ABI we are using - libsuff= - case $host_cpu in - x86_64*|s390x*|powerpc64*) -echo '[#]line __oline__ configure' conftest.$ac_ext -if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) -libsuff=64 -sys_lib_search_path_spec=/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff} -;; - esac -fi -rm -rf conftest* -;; - esac - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf(cd /etc; cat %s, \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -sys_lib_dlsearch_path_spec=/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra +sys_lib_dlsearch_path_spec=/lib /usr/lib $lt_ld_extra fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -1610,7 +1581,7 @@ linux*) dynamic_linker='GNU/Linux ld.so' ;; -knetbsd*-gnu) +netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -1619,7 +1590,7 @@ knetbsd*-gnu) shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes -
Bug#375553: xserver-xorg: Server freezes switching to console and back
Ok thanks, which driver do you have installed? I guess it's xserver-xorg-video-sis 1:0.9.1-4? Correct. The latest upstream release is currently in experimental (xserver-xorg-video-sis 1:0.9.3-1), so it would be good to test it. However, the changelog is pretty small so there are few chances your problem gets fixed. At least, once we know the problem occurs with the latest upstream, we will be able to forward this bug upstream at bugzilla.freedesktop.org. I used apt-src to get and build the relevant packages from unstable, and the problem persists. Here's a partial list of the packages I have installed. If this feedback is enough I will revert to the etch version of the packages. $ dpkg -l | grep xorg ii xserver-xorg 7.2-2 the X.Org X server ii xserver-xorg-core1.3.0.0.dfsg-3 X.Org X server -- core server ii xserver-xorg-dev 1.3.0.0.dfsg-3 X.Org X server -- development files ii xserver-xorg-input-all 7.2-2 the X.Org X server -- input driver metapacka ii xserver-xorg-input-evdev 1.1.2-6 X.Org X server -- evdev input driver ii xserver-xorg-input-kbd 1.1.0-4 X.Org X server -- keyboard input driver ii xserver-xorg-input-mouse 1.1.1-3 X.Org X server -- mouse input driver ii xserver-xorg-input-synaptics 0.14.6-1Synaptics TouchPad driver for X.Org/XFree86 ii xserver-xorg-input-wacom 0.7.4.1-5 X.Org X server -- wacom input driver ii xserver-xorg-video-all 7.2-2 the X.Org X server -- output driver metapack ii xserver-xorg-video-apm 1.1.1-3 X.Org X server -- APM display driver ii xserver-xorg-video-ark 0.6.0-3 X.Org X server -- ark display driver ii xserver-xorg-video-ati 6.6.3-2 X.Org X server -- ATI display driver ii xserver-xorg-video-chips 1.1.1-4 X.Org X server -- Chips display driver ii xserver-xorg-video-cirrus1.1.0-3 X.Org X server -- Cirrus display driver ii xserver-xorg-video-cyrix 1.1.0-4 X.Org X server -- Cyrix display driver ii xserver-xorg-video-dummy 0.2.0-3 X.Org X server -- dummy display driver ii xserver-xorg-video-fbdev 0.3.1-1 X.Org X server -- fbdev display driver ii xserver-xorg-video-glint 1.1.1-3 X.Org X server -- Glint display driver ii xserver-xorg-video-i128 1.2.0-3 X.Org X server -- i128 display driver ii xserver-xorg-video-i740 1.1.0-3 X.Org X server -- i740 display driver ii xserver-xorg-video-i810 1.7.2-4 X.Org X server -- Intel i8xx, i9xx display d ii xserver-xorg-video-imstt 1.1.0-3 X.Org X server -- IMSTT display driver ii xserver-xorg-video-mga 1.4.4.dfsg.1-2 X.Org X server -- MGA display driver ii xserver-xorg-video-neomagic 1.1.1-5 X.Org X server -- Neomagic display driver ii xserver-xorg-video-newport 0.2.0-3 X.Org X server -- Newport display driver ii xserver-xorg-video-nsc 2.8.1-3 X.Org X server -- NSC display driver ii xserver-xorg-video-nv1.2.0-3 X.Org X server -- NV display driver ii xserver-xorg-video-rendition 4.1.0.dfsg.1-4 X.Org X server -- Rendition display driver ii xserver-xorg-video-s30.4.1-5 X.Org X server -- legacy S3 display driver ii xserver-xorg-video-s3virge 1.9.1-3 X.Org X server -- S3 ViRGE display driver ii xserver-xorg-video-savage2.1.2-3 X.Org X server -- Savage display driver ii xserver-xorg-video-siliconmotion 1.4.1-4 X.Org X server -- SiliconMotion display driv ii xserver-xorg-video-sis 0.9.3-1 X.Org X server -- SiS display driver ii xserver-xorg-video-sisusb0.8.1-3 X.Org X server -- SiS USB display driver ii xserver-xorg-video-tdfx 1.3.0-1 X.Org X server -- tdfx display driver ii xserver-xorg-video-tga 1.1.0-3 X.Org X server -- TGA display driver ii xserver-xorg-video-trident 1.2.3-1 X.Org X server -- Trident display driver ii xserver-xorg-video-tseng 1.1.0-3 X.Org X server -- Tseng display driver ii xserver-xorg-video-v4l
xserver-xorg-video-suncg6: Changes to 'debian-unstable'
.cvsignore| 19 ChangeLog | 218 + Makefile.in | 12 aclocal.m4| 379 +- autogen.sh| 12 config.guess | 685 ++-- config.h.in |9 config.sub| 240 + configure | 7799 ++ debian/changelog | 17 debian/control| 14 debian/rules |4 debian/xsfbs/xsfbs.mk | 28 ltmain.sh | 12 man/.cvsignore|3 man/Makefile.am |2 man/Makefile.in | 14 man/suncg6.man|4 src/.cvsignore|6 src/Makefile.in | 12 src/cg6_regs.h|2 21 files changed, 5279 insertions(+), 4212 deletions(-) New commits: commit e46df9a9aead2542b9b5edfdd7292c7e9d420048 Author: Brice Goglin [EMAIL PROTECTED] Date: Tue May 1 15:01:03 2007 +0200 autoreconf diff --git a/Makefile.in b/Makefile.in index 549e9f1..bd3d980 100644 --- a/Makefile.in +++ b/Makefile.in @@ -129,6 +129,7 @@ F77 = @F77@ FFLAGS = @FFLAGS@ FILE_MAN_DIR = @FILE_MAN_DIR@ FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ +GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -163,13 +164,9 @@ STRIP = @STRIP@ VERSION = @VERSION@ XORG_CFLAGS = @XORG_CFLAGS@ XORG_LIBS = @XORG_LIBS@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ @@ -186,24 +183,31 @@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ +htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ +localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ moduledir = @moduledir@ oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ +psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ diff --git a/aclocal.m4 b/aclocal.m4 index aaed1b9..aaae5ad 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -13,7 +13,7 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# serial 48 AC_PROG_LIBTOOL +# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) @@ -1397,18 +1397,6 @@ freebsd1*) dynamic_linker=no ;; -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. @@ -1564,7 +1552,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux*) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -1578,27 +1566,10 @@ linux*) # before this can be enabled. hardcode_into_libs=yes - # find out which ABI we are using - libsuff= - case $host_cpu in - x86_64*|s390x*|powerpc64*) -echo '[#]line __oline__ configure' conftest.$ac_ext -if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) -libsuff=64 -sys_lib_search_path_spec=/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff} -;; - esac -fi -rm -rf conftest* -;; - esac - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf(cd /etc; cat %s, \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -sys_lib_dlsearch_path_spec=/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra +sys_lib_dlsearch_path_spec=/lib /usr/lib $lt_ld_extra fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -1610,7 +1581,7 @@ linux*) dynamic_linker='GNU/Linux ld.so' ;; -knetbsd*-gnu) +netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -1619,7 +1590,7 @@ knetbsd*-gnu) shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no
xserver-xorg-video-suncg6: Changes to 'upstream-unstable'
man/suncg6.man |6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) New commits: commit 62f44115b3c7d2c558731135c1354eba81060b2d Author: Alan Coopersmith [EMAIL PROTECTED] Date: Thu Mar 1 11:01:57 2007 -0800 Replace references to XFree86/XF86Config in man page diff --git a/man/suncg6.man b/man/suncg6.man index b0dc5e8..6ec4409 100644 --- a/man/suncg6.man +++ b/man/suncg6.man @@ -14,17 +14,17 @@ suncg6 \- GX/Turbo GX video driver .fi .SH DESCRIPTION .B suncg6 -is an XFree86 driver for Sun GX and Turbo GX (also known as cgsix) video cards. +is an __xservername__ driver for Sun GX and Turbo GX (also known as cgsix) video cards. THIS MAN PAGE NEEDS TO BE FILLED IN. .SH SUPPORTED HARDWARE The .B suncg6 driver supports... .SH CONFIGURATION DETAILS -Please refer to XF86Config(__filemansuffix__) for general configuration +Please refer to __xconfigfile__(__filemansuffix__) for general configuration details. This section only covers configuration details specific to this driver. .SH SEE ALSO -XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) +__xservername__(1), __xconfigfile__(__filemansuffix__), xorgconfig(1), Xserver(1), X(__miscmansuffix__) .SH AUTHORS Authors include: Jakub Jelinek [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421783: xorg: human interface freeze with nv driver while running glx applications
Package: xorg Version: 1:7.2-3 Severity: normal Observation: The human interface freezes, which means: 1) no screen updates 2) no keyboard led updates 3) no reaction on any keyboard input (like ctrl-alt-backspace or -del) 4) music player continues playing songs (= no system freeze) Steps to reproduce: Run Google Earth. It might also work with running a game wine (with glx). The human interface should instantly freeze then. Please note that the logfile is supposed to end in Backtrace: as this reflects the state of the file on my disk. Also note that I think it to be a heisenbug, so it might already have disappeared. A short answer of other who can or cannot reproduce this bug would be helpful, so if you happen to have a similar setup, please just try! Helmut Grohne -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.20.1 (SMP w/2 CPU cores) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/dash Versions of packages xorg depends on: ii konsole [x-terminal- 4:3.5.6.dfsg.2-2X terminal emulator for KDE ii libgl1-mesa-glx 6.5.2-4 A free implementation of the OpenG ii libglu1-mesa 6.5.2-4 The OpenGL utility library (GLU) ii type-handling [not+s 0.2.19 dpkg architecture generation scrip ii xbase-clients1:7.2.ds2-2 miscellaneous X clients ii xfonts-100dpi1:1.0.0-3 100 dpi fonts for X ii xfonts-75dpi 1:1.0.0-3 75 dpi fonts for X ii xfonts-base 1:1.0.0-4 standard fonts for X ii xfonts-scalable 1:1.0.0-6 scalable fonts for X ii xkb-data 0.9-4 X Keyboard Extension (XKB) configu ii xorg-docs1:1.2+git20061105-3 Miscellaneous documentation for th ii xserver-xorg 1:7.2-3 the X.Org X server ii xterm [x-terminal-em 225-1 X terminal emulator ii xutils 1:7.1.ds.3-1X Window System utility programs Versions of packages xorg recommends: ii libgl1-mesa-dri 6.5.2-4A free implementation of the OpenG Othere interesting packages: ii xserver-xorg-core1.3.0.0.dfsg-3 X.Org X server -- core server ii xserver-xorg-input-evdev 1.1.2-6 X.Org X server -- evdev input driver ii xserver-xorg-input-kbd 1.1.0-4 X.Org X server -- keyboard input driver ii xserver-xorg-input-mouse 1.1.1-3 X.Org X server -- mouse input driver ii xserver-xorg-video-nv2.0.2-1 X.Org X server -- NV display driver ii mesa-utils 6.5.2-4 Miscellaneous Mesa GL utilities ii xlibmesa-dri 7.2-3transitional package for Debian etch -- no debconf information *** Xorg.conf ** # xorg.conf (Xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type man xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands as root: # # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom # md5sum /etc/X11/xorg.conf /var/lib/xfree86/xorg.conf.md5sum # dpkg-reconfigure xserver-xorg Section Files FontPathunix/:7100# local font server # if the local font server has problems, we can fall back on these FontPath/usr/share/fonts/X11/misc FontPath/usr/lib/X11/fonts/misc FontPath/usr/share/fonts/X11/cyrillic FontPath/usr/lib/X11/fonts/cyrillic FontPath/usr/lib/X11/fonts/100dpi/:unscaled FontPath/usr/lib/X11/fonts/75dpi/:unscaled FontPath/usr/share/fonts/X11/Type1 FontPath/usr/lib/X11/fonts/Type1 FontPath/usr/share/fonts/X11/CID FontPath/usr/lib/X11/fonts/CID FontPath/usr/share/fonts/X11/100dpi FontPath/usr/lib/X11/fonts/100dpi FontPath/usr/share/fonts/X11/75dpi FontPath/usr/lib/X11/fonts/75dpi EndSection Section Module Loadbitmap Loaddbe Loadddc Loaddri Loadevdev Loadextmod Loadfreetype Loadglx Loadint10 Loadrecord Loadtype1 Loadvbe EndSection Section InputDevice Identifier Generic Keyboard Driver
xserver-xorg-video-sunleo: Changes to 'upstream-unstable'
man/sunleo.man |6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) New commits: commit fe5af18d4bc8fc095e3b12d1030b6e5765c7e3a4 Author: Alan Coopersmith [EMAIL PROTECTED] Date: Thu Mar 1 11:05:03 2007 -0800 Replace references to XFree86/XF86Config in man page diff --git a/man/sunleo.man b/man/sunleo.man index 2871ec5..44c7961 100644 --- a/man/sunleo.man +++ b/man/sunleo.man @@ -22,7 +22,7 @@ sunleo \- Leo video driver .fi .SH DESCRIPTION .B leo -is an XFree86 driver for Sun Leo (ZX) video cards. +is an __xservername__ driver for Sun Leo (ZX) video cards. .PP Also known as the ZX or T(urbo)ZX, Leo is a 24 bit accelerated 3D graphics card. Both cards are double-width, but the TZX also requires @@ -55,11 +55,11 @@ SPARCcenter 2000 .SH CONFIGURATION DETAILS You must set DefaultDepth to 32 in the Screen Section. .nf -Please refer to XF86Config(__filemansuffix__) for general configuration +Please refer to __xconfigfile__(__filemansuffix__) for general configuration details. This section only covers configuration details specific to this driver. .SH SEE ALSO -XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) +__xservername__(1), __xconfigfile__(__filemansuffix__), xorgconfig(1), Xserver(1), X(__miscmansuffix__) .SH AUTHORS Driver authors include: Jakub Jelinek [EMAIL PROTECTED] .br -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xserver-xorg-video-sunleo: Changes to 'debian-unstable'
.cvsignore| 19 ChangeLog | 235 + Makefile.in | 12 aclocal.m4| 379 +- autogen.sh| 12 config.guess | 685 ++-- config.h.in |9 config.sub| 240 + configure | 7799 ++ debian/changelog | 18 debian/control| 14 debian/rules |4 debian/xsfbs/xsfbs.mk | 28 ltmain.sh | 12 man/.cvsignore|2 man/Makefile.am |2 man/Makefile.in | 14 man/sunleo.man|4 src/.cvsignore|6 src/Makefile.in | 12 src/leo_regs.h|2 21 files changed, 5293 insertions(+), 4215 deletions(-) New commits: commit 5cf4ff598e175b33787b99b4620ee32e8947d803 Author: Brice Goglin [EMAIL PROTECTED] Date: Tue May 1 15:21:19 2007 +0200 autoreconf diff --git a/Makefile.in b/Makefile.in index 549e9f1..bd3d980 100644 --- a/Makefile.in +++ b/Makefile.in @@ -129,6 +129,7 @@ F77 = @F77@ FFLAGS = @FFLAGS@ FILE_MAN_DIR = @FILE_MAN_DIR@ FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ +GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -163,13 +164,9 @@ STRIP = @STRIP@ VERSION = @VERSION@ XORG_CFLAGS = @XORG_CFLAGS@ XORG_LIBS = @XORG_LIBS@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ @@ -186,24 +183,31 @@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ +htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ +localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ moduledir = @moduledir@ oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ +psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ diff --git a/aclocal.m4 b/aclocal.m4 index aaed1b9..aaae5ad 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -13,7 +13,7 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# serial 48 AC_PROG_LIBTOOL +# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) @@ -1397,18 +1397,6 @@ freebsd1*) dynamic_linker=no ;; -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. @@ -1564,7 +1552,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux*) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -1578,27 +1566,10 @@ linux*) # before this can be enabled. hardcode_into_libs=yes - # find out which ABI we are using - libsuff= - case $host_cpu in - x86_64*|s390x*|powerpc64*) -echo '[#]line __oline__ configure' conftest.$ac_ext -if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) -libsuff=64 -sys_lib_search_path_spec=/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff} -;; - esac -fi -rm -rf conftest* -;; - esac - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf(cd /etc; cat %s, \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -sys_lib_dlsearch_path_spec=/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra +sys_lib_dlsearch_path_spec=/lib /usr/lib $lt_ld_extra fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -1610,7 +1581,7 @@ linux*) dynamic_linker='GNU/Linux ld.so' ;; -knetbsd*-gnu) +netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -1619,7 +1590,7 @@ knetbsd*-gnu) shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no
xserver-xorg-video-sunffb: Changes to 'upstream-unstable'
man/sunffb.man |6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) New commits: commit b86a3f4662d384e3a3540340bfd5171ab2523c34 Author: Alan Coopersmith [EMAIL PROTECTED] Date: Thu Mar 1 11:03:41 2007 -0800 modified: man/sunffb.man diff --git a/man/sunffb.man b/man/sunffb.man index e30c73a..8c55bb6 100644 --- a/man/sunffb.man +++ b/man/sunffb.man @@ -14,17 +14,17 @@ ffb \- SUNFFB video driver .fi .SH DESCRIPTION .B ffb -is an XFree86 driver for Sun Creator, Creator 3D and Elite 3D video cards. +is an __xservername__ driver for Sun Creator, Creator 3D and Elite 3D video cards. THIS MAN PAGE NEEDS TO BE FILLED IN. .SH SUPPORTED HARDWARE The .B ffb driver supports... .SH CONFIGURATION DETAILS -Please refer to XF86Config(__filemansuffix__) for general configuration +Please refer to __xconfigfile__(__filemansuffix__) for general configuration details. This section only covers configuration details specific to this driver. .SH SEE ALSO -XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) +__xservername__(1), __xconfigfile__(__filemansuffix__), xorgconfig(1), Xserver(1), X(__miscmansuffix__) .SH AUTHORS Authors include: Jakub Jelinek [EMAIL PROTECTED], David S. Miller [EMAIL PROTECTED], Michal Rehacek [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xserver-xorg-video-sunffb: Changes to 'debian-unstable'
.cvsignore| 19 ChangeLog | 398 ++ Makefile.in | 12 aclocal.m4| 379 +- autogen.sh| 12 config.guess | 685 ++-- config.h.in |9 config.sub| 240 + configure | 7940 ++ debian/changelog | 19 debian/control| 14 debian/rules |4 debian/xsfbs/xsfbs.mk | 28 ltmain.sh | 12 man/.cvsignore|2 man/Makefile.am |2 man/Makefile.in | 14 man/sunffb.man|4 src/.cvsignore|6 src/Makefile.in | 12 src/VISmoveImage.s|2 src/ffb_asm.s |2 src/ffb_dac.h |2 src/ffb_fifo.h|2 src/ffb_loops.h |2 25 files changed, 5484 insertions(+), 4337 deletions(-) New commits: commit a205278d79651f5216ac57736bdae5076d4af3d7 Author: Brice Goglin [EMAIL PROTECTED] Date: Tue May 1 15:35:18 2007 +0200 autoreconf diff --git a/Makefile.in b/Makefile.in index 8c73b02..0dcce71 100644 --- a/Makefile.in +++ b/Makefile.in @@ -135,6 +135,7 @@ F77 = @F77@ FFLAGS = @FFLAGS@ FILE_MAN_DIR = @FILE_MAN_DIR@ FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ +GREP = @GREP@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ @@ -171,13 +172,9 @@ STRIP = @STRIP@ VERSION = @VERSION@ XORG_CFLAGS = @XORG_CFLAGS@ XORG_LIBS = @XORG_LIBS@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ @@ -194,24 +191,31 @@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ +htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ +localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ moduledir = @moduledir@ oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ +psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ diff --git a/aclocal.m4 b/aclocal.m4 index 1a2adab..930587f 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -13,7 +13,7 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# serial 48 AC_PROG_LIBTOOL +# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) @@ -1397,18 +1397,6 @@ freebsd1*) dynamic_linker=no ;; -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. @@ -1564,7 +1552,7 @@ linux*oldld* | linux*aout* | linux*coff*) ;; # This must be Linux ELF. -linux*) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -1578,27 +1566,10 @@ linux*) # before this can be enabled. hardcode_into_libs=yes - # find out which ABI we are using - libsuff= - case $host_cpu in - x86_64*|s390x*|powerpc64*) -echo '[#]line __oline__ configure' conftest.$ac_ext -if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) -libsuff=64 -sys_lib_search_path_spec=/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff} -;; - esac -fi -rm -rf conftest* -;; - esac - # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf(cd /etc; cat %s, \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` -sys_lib_dlsearch_path_spec=/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra +sys_lib_dlsearch_path_spec=/lib /usr/lib $lt_ld_extra fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -1610,7 +1581,7 @@ linux*) dynamic_linker='GNU/Linux ld.so' ;; -knetbsd*-gnu) +netbsdelf*-gnu) version_type=linux need_lib_prefix=no
Bug#421795: xserver-xorg-core: Reports wrong version number
Package: xserver-xorg-core Version: 2:1.3.0.0.dfsg-3 Severity: normal Xorg -version returns: X Window System Version 1.3.0 when it should really be 7.2.x, from what I can tell. This definitely keeps the proprietary ATI graphics driver from working. It refuses to run after a version mismatch, and it won't compile for 1.3.0. I've had to add sources from testing, and use xserver-xorg-core from there, which reports verion: X Window System Version 7.1.1 -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /etc/X11/X target does not match checksum in /var/lib/x11/X.md5sum. X server symlink status: lrwxrwxrwx 1 root root 13 2007-03-26 22:02 /etc/X11/X - /usr/bin/Xorg -rwxr-xr-x 1 root root 1703948 2007-04-27 00:02 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE) /etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum. Xorg X server configuration file status: -rw-r--r-- 1 root root 3073 2007-04-24 21:15 /etc/X11/xorg.conf -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#417860: Same problem here
I have exactly the same problem. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) Regards, César -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#180107: 0 reference application.
CDPN Really Warming Up! China Datacom Corp. Sym: CDPN Close: $0.0675 UP 4% Investors are taking notice of CDPN, with hot news, volume rising, and price on a steady climb. This is is on the hot list. Get on CDPN first thing Tuesday! The user's browser page reloaded to include the requested information. If you would like more information on the topic, supporting documentation is listed as well. , from any consequences of its use. This is a common Ajax UI use case. Why adopt this design? Lastly, note the navigation bar on the left of Figure 3. However, in this case, the change is sent to the controller. Brian GoetzTechnology Evangelist, Sun Microsystems The answer may seem counterintuitive. Assembles and prepares a SAML AuthnRequest element for transmission as an HTTP parameter according to the SAML 2. My advice is this: Write simple straightforward code and then, if the performance is still not good enough, optimize. XML signatures are a standard for digital signatures in the XML data format, and they allow you to authenticate and protect the integrity of data in XML and web service transactions. You are also free to use this source code as a springboard for your own open-source projects. It comes with full source code available under a BSD-style license, so you can experiment with it and use it in your own applications. This is great for performance but means it's harder to predict the performance of a given block of code. In a stand-alone GUI client, user interactions could be button clicks or menu selections, whereas in an enterprise web application, they appear as GET and POST HTTP requests. Because Java code is dynamically compiled, realistic testing conditions are crucial. Figure 1 illustrates an example of the exchange of messages in that configuration. Generics did this for classes relative to types. Refer to the Sun Microsystems, Inc. 0: All of its content is user-driven, and it allows users to tag the data in a way that makes sense to them. Processing the SAML Response On receiving the authentication request, the IdP authenticates the user and directs the browser to post a SAML response to the sp. Binary Code License Agreement (BCL). Code Sample 1 shows a simple component that you can use to create such a model. Figure 2 shows this interaction in more detail. But implicit in the concept of good enough is that you need to have clear performance metrics. Figure 1 points out some of these special features. In addition, it can also provide the methods that effect the model's property changes for one or more views that are registered with it. It comes with full source code available under a BSD-style license, so you can experiment with it and use it in your own applications. 0 demo provides a meeting ground for buyers and sellers of pets, as well as for pet lovers just wanting to look. This is the second point of integration. 0 code and the PHP application. In addition, the Java Pet Store demo uses an Ajax user interface (UI) throughout the application to provide a richer user experience that resembles a desktop application. The following code shows a customized Control class that allows bundle searches for . A future article on Lightbulb will explain SAML's circle-of-trust concept and will describe how Lightbulb's single logout process terminates user sessions with all the members of a circle of trust. You are free to use this source code for any purpose, commercial or non-commercial, as long as you indemnify the authors and Sun Microsystems, Inc. idpEntityID The IdP identifier for authentication. Processing the SAML Response On receiving the authentication request, the IdP authenticates the user and directs the browser to post a SAML response to the sp. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421795: marked as done (xserver-xorg-core: Reports wrong version number)
Your message dated Tue, 01 May 2007 18:25:54 +0200 with message-id [EMAIL PROTECTED] and subject line Bug#421795: xserver-xorg-core: Reports wrong version number has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: xserver-xorg-core Version: 2:1.3.0.0.dfsg-3 Severity: normal Xorg -version returns: X Window System Version 1.3.0 when it should really be 7.2.x, from what I can tell. This definitely keeps the proprietary ATI graphics driver from working. It refuses to run after a version mismatch, and it won't compile for 1.3.0. I've had to add sources from testing, and use xserver-xorg-core from there, which reports verion: X Window System Version 7.1.1 -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /etc/X11/X target does not match checksum in /var/lib/x11/X.md5sum. X server symlink status: lrwxrwxrwx 1 root root 13 2007-03-26 22:02 /etc/X11/X - /usr/bin/Xorg -rwxr-xr-x 1 root root 1703948 2007-04-27 00:02 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE) /etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum. Xorg X server configuration file status: -rw-r--r-- 1 root root 3073 2007-04-24 21:15 /etc/X11/xorg.conf ---End Message--- ---BeginMessage--- Thomas G. Mayfield wrote: Package: xserver-xorg-core Version: 2:1.3.0.0.dfsg-3 Severity: normal Xorg -version returns: X Window System Version 1.3.0 when it should really be 7.2.x, from what I can tell. This definitely keeps the proprietary ATI graphics driver from working. It refuses to run after a version mismatch, and it won't compile for 1.3.0. I've had to add sources from testing, and use xserver-xorg-core from there, which reports verion: X Window System Version 7.1.1 It has been reported several times, no need to keep one more bug report about this. See http://wiki.debian.org/XStrikeForce/ReleaseNotes Brice ---End Message---
Processed: your mail
Processing commands for [EMAIL PROTECTED]: forcemerge 417860 421418 Bug#417860: Xv plays only on external VGA Bug#421418: xserver-xorg-video-intel: Can't play videos Forcibly Merged 417860 421418. thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xserver-xorg-video-suntcx: Changes to 'debian-unstable'
.cvsignore | 19 ChangeLog| 218 - Makefile.in | 12 aclocal.m4 | 379 + autogen.sh | 12 config.guess | 685 +-- config.h.in |9 config.sub | 240 - configure| 7799 --- debian/changelog | 14 debian/control | 14 debian/rules |2 debian/xsfbs/xsfbs-autoreconf.mk | 150 debian/xsfbs/xsfbs.mk| 379 + debian/xsfbs/xsfbs.sh| 907 ltmain.sh| 12 man/.cvsignore |2 man/Makefile.am |2 man/Makefile.in | 14 man/suntcx.man |2 src/.cvsignore |6 src/Makefile.in | 12 22 files changed, 6683 insertions(+), 4206 deletions(-) New commits: commit 5a5e7e0185fa76caa4b2546dcb7b024162e2 Author: Brice Goglin [EMAIL PROTECTED] Date: Tue May 1 18:59:25 2007 +0200 Update upstream ChangeLog diff --git a/ChangeLog b/ChangeLog index 9044bb5..9be1175 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,46 +1,206 @@ -2006-04-07 Adam Jackson [EMAIL PROTECTED] +commit 4e1f16c2f2b5285cbc36a7458895dceafe43173d +Author: Alan Coopersmith [EMAIL PROTECTED] +Date: Thu Mar 1 11:06:47 2007 -0800 - * configure.ac: - * src/tcx.h: - * src/tcx_driver.c: - Unlibcwrap. Bump server version requirement. Bump to 1.1.0. +modified: man/suntcx.man -2005-12-20 Kevin E. Martin kem-at-freedesktop-dot-org +commit 41c0df572fa1ab1cb50304d69a1ac3da50103c9b +Author: Adam Jackson [EMAIL PROTECTED] +Date: Fri Apr 7 21:31:45 2006 + - * configure.ac: - Update package version for X11R7 release. +Unlibcwrap. Bump server version requirement. Bump to 1.1.0. -2005-12-14 Kevin E. Martin kem-at-freedesktop-dot-org +commit b23bc8a174f7bb356fcf27d88595db9e1233bc6f +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Wed Dec 21 02:30:03 2005 + - * configure.ac: - Update package version number for final X11R7 release candidate. +Update package version for X11R7 release. -2005-12-06 Kevin E. Martin kem-at-freedesktop-dot-org +commit a600d2cdeb0985fc280610731c026e99cb31ee5a +Author: Adam Jackson [EMAIL PROTECTED] +Date: Mon Dec 19 16:25:55 2005 + - * man/Makefile.am: - Change *man_SOURCES == *man_PRE to fix autotools warnings. +Stub COPYING files -2005-12-03 Kevin E. Martin kem-at-freedesktop-dot-org +commit d0af2d2e80bb9ca2fcbc6ed542f4f3b25c482681 +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Thu Dec 15 00:24:20 2005 + - * configure.ac: - Update package version number for X11R7 RC3 release. +Update package version number for final X11R7 release candidate. -2005-12-01 Kevin E. Martin kem-at-freedesktop-dot-org +commit 65c63811002d0b084fe71ac77586bbddc28e7499 +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Tue Dec 6 22:48:39 2005 + - * configure.ac: - Remove extraneous AC_MSG_RESULT. +Change *man_SOURCES == *man_PRE to fix autotools warnings. -2005-11-29 Adam Jackson [EMAIL PROTECTED] +commit 042e683c2283a2617a61ae381458411d8d0623f0 +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Sat Dec 3 05:49:36 2005 + - * configure.ac: - Only build dlloader modules by default. +Update package version number for X11R7 RC3 release. -2005-11-09 Kevin E. Martin kem-at-freedesktop-dot-org +commit 9e88bf8c92c46fc30c90abc0871e71d9c8ddb3a7 +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Fri Dec 2 02:16:11 2005 + - * configure.ac: - Update package version number for X11R7 RC2 release. +Remove extraneous AC_MSG_RESULT. -2005-11-01 Kevin E. Martin kem-at-freedesktop-dot-org +commit 37a54d8d8717d2c934c78c348abc29c88532549c +Author: Adam Jackson [EMAIL PROTECTED] +Date: Tue Nov 29 23:30:05 2005 + - * configure.ac: - Update pkgcheck dependencies to work with separate build roots. +Only build dlloader modules by default. + +commit e94fb748eaa2bbdf7a7fd2a73f7cf4ce76a9d065 +Author: Alan Coopersmith [EMAIL PROTECTED] +Date: Mon Nov 28 22:04:13 2005 + + +Change *mandir targets to use new *_MAN_DIR variables set by xorg-macros.m4 +update to fix bug #5167 (Linux prefers *.1x man pages in man1 subdir) + +commit f8c2fd8ff1f8d1bcec8ebc9ec236d17fa2eb792f +Author: Eric Anholt [EMAIL PROTECTED] +Date: Mon Nov 21 10:49:20 2005 + + +Add .cvsignores for drivers. + +commit b550be51b992dd7bffadd63d6d265a76ac9bfcab +Author: Kevin E Martin [EMAIL PROTECTED] +Date: Wed Nov 9 21:15:21 2005 + + +Update package version number for X11R7 RC2 release. + +commit 5b327f150ca2d7ceeed2a6f72cb8608d75de233a +Author: Kevin E Martin
xserver-xorg-video-suntcx: Changes to 'upstream-unstable'
man/suntcx.man |6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) New commits: commit 4e1f16c2f2b5285cbc36a7458895dceafe43173d Author: Alan Coopersmith [EMAIL PROTECTED] Date: Thu Mar 1 11:06:47 2007 -0800 modified: man/suntcx.man diff --git a/man/suntcx.man b/man/suntcx.man index 06bf55c..2c939f0 100644 --- a/man/suntcx.man +++ b/man/suntcx.man @@ -14,17 +14,17 @@ suntcx \- TCX video driver .fi .SH DESCRIPTION .B suntcx -is an XFree86 driver for Sun TCX video cards. +is an __xservername__ driver for Sun TCX video cards. THIS MAN PAGE NEEDS TO BE FILLED IN. .SH SUPPORTED HARDWARE The .B suntcx driver supports... .SH CONFIGURATION DETAILS -Please refer to XF86Config(__filemansuffix__) for general configuration +Please refer to __xconfigfile__(__filemansuffix__) for general configuration details. This section only covers configuration details specific to this driver. .SH SEE ALSO -XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) +__xservername__(1), __xconfigfile__(__filemansuffix__), xorgconfig(1), Xserver(1), X(__miscmansuffix__) .SH AUTHORS Authors include: Jakub Jelinek [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#117549: xserver-xfree86: [trident] non-XAA screen corruption on TGU 96xx rev 211
Hi, About 5 years ago, you reported a bug to the Debian BTS regarding some screen corruption using the trident driver on XFree86. Did you reproduce this problem recently? With Xorg/Etch? If not, I will close this bug in the next weeks. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#155291: xserver-xfree86: [trident] hardware cursor corrupted on CyberBlade/i1
Hi, About 5 years ago, you reported a bug to the Debian BTS regarding the hardware cursor being corrupted on a Trident Cyberblade board. Did you reproduce this problem recently? With Xorg/Etch? If not, I will close this bug in the next weeks. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#267713: xserver-xfree86: [trident] X server switches monitor off upoon LeaveVT() and back on upon EnterVT() on CyberBlade/i1 rev 0
Hi, About 3 years ago, you reported a bug to the Debian BTS regarding the screen blanking instead of switching to VT on a Trident Cyberblade board. Did you reproduce this problem recently? With Xorg/Etch? If not, I will close this bug in the next weeks. Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#117549: xserver-xfree86: [trident] non-XAA screen corruption on TGU 96xx rev 211
Le mardi 01 mai 2007 à 19:43 +0200, Brice Goglin a écrit : Hi, About 5 years ago, you reported a bug to the Debian BTS regarding some screen corruption using the trident driver on XFree86. Did you reproduce this problem recently? With Xorg/Etch? If not, I will close this bug in the next weeks. Salut Brice, unfortunately I don't have access to this hardware anymore. It was already a rare, old card at the time I wrote this bug report so I don't think many people are still facing this issue five years later. Cheers, -- .''`. : :' : We are debian.org. Lower your prices, surrender your code. `. `' We will add your hardware and software distinctiveness to `-our own. Resistance is futile. signature.asc Description: Ceci est une partie de message numériquement signée
Processed: Bug#395943: xserver-xorg-video-trident: Not really usable yet for Volari XP5
Processing commands for [EMAIL PROTECTED]: forwarded 395943 https://bugs.freedesktop.org/show_bug.cgi?id=5775 Bug#395943: xserver-xorg-video-trident: Not really usable yet for Volari XP5 Noted your statement that Bug has been forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=5775. thank you Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: bug 407620 is forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=2528
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.2 forwarded 407620 https://bugs.freedesktop.org/show_bug.cgi?id=2528 Bug#407620: xserver-xorg-video-trident: XV overlay is blue Noted your statement that Bug has been forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=2528. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#395943: xserver-xorg-video-trident: Not really usable yet for Volari XP5
forwarded 395943 https://bugs.freedesktop.org/show_bug.cgi?id=5775 thank you Hi, About 6 months ago, you reported a bug to the Debian BTS regarding the trident driver not working on a Volari XP5 board. I see a patch from you in the upstream bug, but I don't see it applied in git, while the bug is marked as closed. Is the bug still reproducible? Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: bug 402673 is forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=8548
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.2 forwarded 402673 https://bugs.freedesktop.org/show_bug.cgi?id=8548 Bug#402673: xserver-xorg-video-trident: Unwanted resolution change on backlight brightness change Noted your statement that Bug has been forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=8548. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#395943: xserver-xorg-video-trident: Not really usable yet for Volari XP5
Brice Goglin wrote... About 6 months ago, you reported a bug to the Debian BTS regarding the trident driver not working on a Volari XP5 board. I see a patch from you in the upstream bug, but I don't see it applied in git, while the bug is marked as closed. Is the bug still reproducible? The problem of course still exists, I'm using a patched version for etch. I didn't try xorg 7.2 but I seriously doubt anything was changed there. I could try something in the unstable series if you want to - but that will become a bit difficult since I don't have permanent access to that computer and the owner is interested in a usable system. Regards, Christoph signature.asc Description: Digital signature
Bug#395943: xserver-xorg-video-trident: Not really usable yet for Volari XP5
Christoph Biedl wrote: About 6 months ago, you reported a bug to the Debian BTS regarding the trident driver not working on a Volari XP5 board. I see a patch from you in the upstream bug, but I don't see it applied in git, while the bug is marked as closed. Is the bug still reproducible? The problem of course still exists, I'm using a patched version for etch. I didn't try xorg 7.2 but I seriously doubt anything was changed there. Do you have any idea why your patch didn't get applied upstream? Could you ping them again? I could try something in the unstable series if you want to - but that will become a bit difficult since I don't have permanent access to that computer and the owner is interested in a usable system. Etch already contained 1.2.3 (latest upstream, the one in Xorg 7.2). There's nothing more recent to try, except git snapshots, but I don't see anything specific to your board committed recently. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#420532: xserver-xorg-input-evdev: Acecad USB Tablet misconfigured by evdev in X, but correctly configured by kernel
Apparently it's not completely fixed yet. Although the tablet motion is not as jerky as it was with previous versions, it's still reported as a Relative (not Absolute) pointing device, and 'first' (tip) button and pressure don't work. I'm in touch with the upstreadm developer to try and work this out. -- Giuseppe Oblomov Bilotta -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#417860: Can't set 1440x900
After upgrading to 1.3 in unstable, xorg i810 is unusable. Setting to 1440x900 does not work. Switching between tty and X locks the pc. [EMAIL PROTECTED]:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) Regards Oli
Bug#394687: xserver-xorg-video-tseng: fails to detect Ramdac on ET4000/w32p card after upgrade
Brice Goglin wrote: Does this problem still happen? Even with the latest xserver-xorg-core and driver? Yes, it still happens with xserver-xorg-core 2:1.3.0.0.dfsg-3 and video-tseng 1:1.1.0-3. Best regards, - Dietrich -- Viele Wege führen nach Rom, nur der Mittelweg falscher Kompromisse nicht. (A. Schönberg) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#117549: marked as done (xserver-xfree86: [trident] non-XAA screen corruption on TGU 96xx rev 211)
Your message dated Tue, 01 May 2007 22:10:42 +0200 with message-id [EMAIL PROTECTED] and subject line Bug#117549: xserver-xfree86: [trident] non-XAA screen corruption on TGU 96xx rev 211 has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: xserver-xfree86 Version: 4.1.0-8 Severity: normal The trident driver for XFree 4.1 works fine with the Cyber9385 video chip of my box... excepted that the screen synchronization is totally awful, displayong almost 2 lines on 1 (the beam does ~2 left-right passes for one line of pixels). There isn't any suspect error/warning in the log, but I'm keeping one in my fridge. Note that the mouse moving area seems to be the whole screen (not the duplicated one), and the cursor displays perfectly. With xserver-svga (3.3.6-38), it works normally. -- System Information Debian Release: testing/unstable Kernel Version: Linux tatooine 2.4.10-686 #1 Sat Sep 29 19:30:50 EST 2001 i686 unknown Versions of the packages xserver-xfree86 depends on: ii debconf1.0.15 Debian configuration management system ii libc6 2.2.4-3GNU C Library: Shared libraries and Timezone ii xserver-common 4.1.0-8files and utilities common to all X servers ii zlib1g 1.1.3-16 compression library - runtime ---End Message--- ---BeginMessage--- Josselin Mouette wrote: unfortunately I don't have access to this hardware anymore. It was already a rare, old card at the time I wrote this bug report so I don't think many people are still facing this issue five years later. Ok thanks. I am closing for now, since you won't be able to try to reproduce. If anybody ever reproduces, feel free to reopen this bug report. Brice ---End Message---
Processed: Bug#136901: xserver-xfree86: [mouse] click events delayed until Emulate3Timeout is reached when Emulate3Buttons enabled
Processing commands for [EMAIL PROTECTED]: forwarded 136901 https://bugs.freedesktop.org/show_bug.cgi?id=1752 Bug#136901: xserver-xfree86: [mouse] click events delayed until Emulate3Timeout is reached when Emulate3Buttons enabled Noted your statement that Bug has been forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=1752. thank you Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#136901: xserver-xfree86: [mouse] click events delayed until Emulate3Timeout is reached when Emulate3Buttons enabled
forwarded 136901 https://bugs.freedesktop.org/show_bug.cgi?id=1752 thank you Hi, I guess this bug still occurs nowadays? It has been discussed in https://bugs.freedesktop.org/show_bug.cgi?id=1752 even if the title doesn't say so. Debian bug #296620 is also discussed there, but they should not actually be merged. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#369917: marked as done (xserver-xorg-input-mouse: Gets number of buttons wrong, even if Option Buttons specified)
Your message dated Tue, 01 May 2007 22:24:14 +0200 with message-id [EMAIL PROTECTED] and subject line Bug#369917: xserver-xorg-input-mouse: Gets number of buttons wrong, even if Option Buttons specified has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: xserver-xorg-input-mouse Severity: normal Version: 1:1.0.4-2 Using a Logitech MX500 mouse (USB), I find that the server is getting the number of buttons wrong (too high). This happens even if I explicitly tell it how many buttons there are. Here is the relevant section of the log showing the server reading one value, then declaring a different one: (**) Generic Keyboard: Core Keyboard (**) Option Protocol standard (**) Generic Keyboard: Protocol: standard (**) Option AutoRepeat 500 30 (**) Option XkbRules xorg (**) Generic Keyboard: XkbRules: xorg (**) Option XkbModel pc104 (**) Generic Keyboard: XkbModel: pc104 (**) Option XkbLayout us (**) Generic Keyboard: XkbLayout: us (**) Option XkbOptions compose:rwin (**) Generic Keyboard: XkbOptions: compose:rwin (**) Option CustomKeycodes off (**) Generic Keyboard: CustomKeycodes disabled (**) Option Protocol Auto (**) Configured Mouse: Device: /dev/input/mice (**) Configured Mouse: Protocol: Auto (**) Option CorePointer (**) Configured Mouse: Core Pointer (**) Option Device /dev/input/mice (**) Option Buttons 10 (==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Option ZAxisMapping 9 10 (**) Configured Mouse: ZAxisMapping: buttons 9 and 10 (**) Configured Mouse: Buttons: 14 (II) XINPUT: Adding extended input device Configured Mouse (type: MOUSE) (II) XINPUT: Adding extended input device Generic Keyboard (type: KEYBOARD) (--) Configured Mouse: PnP-detected protocol: ExplorerPS/2 (II) Configured Mouse: ps2EnableDataReporting: succeeded -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-ddawson Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) ---End Message--- ---BeginMessage--- As explained by Drew, this is actually the expected behavior. And it doesn't seem to be causing any harm here. Closing. Brice ---End Message---
Bug#421532: Missing line in US keyboard layout
At 1177887413 time_t, Mohammed Adnene Trojette wrote: On Sun, Apr 29, 2007, situert wrote: Does this mean that this bug won't be fixed in stable (Etch)? No, it won't: Etch has been released and this fix is not critical, that's to say not important enough to justify an update for the stable version. For the record, I agree on that. Cheers, -- Julien Danjou .''`. Debian Developer : :' : http://julien.danjou.info `. `' http://people.debian.org/~acid `- 9A0D 5FD9 EB42 22F6 8974 C95C A462 B51E C2FE E5CD signature.asc Description: Digital signature
Bug#77774: xserver-xorg-input-mouse: README.gz should mention that 'usb' mouse protocol not used on Linux
Yes, this file seems very outdated. I don't actually see any trace of USB protocol in the source, even on non-Linux OSes. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#372509: marked as done (xserver-xorg-input-kbd: Keyboard does not work properly for second X server)
Your message dated Tue, 01 May 2007 23:14:43 +0200 with message-id [EMAIL PROTECTED] and subject line Bug#372509,xserver-xorg-input-kbd: Keyboard does not work properly for second X server has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: xserver-xorg-input-kbd Version: 1:1.0.1.3-2 Severity: important When launching a second X server (e.g. using startx -- :1), for the second X Server the keyboard behaves badly. Pressing arbitary keys results in the resolution to be switched around (like what usually happens with Ctrl + Alt + +/-). No characters are printed. Everything works fine for the first X server. I have a Microsoft Natural keyboard pro connected through USB. The keyboard section of my xorg.conf file is: Section InputDevice Driver kbd Identifier Keyboard0 OptionCoreKeyboard Option XkbLayout de Option XkbModel microsoftpro Option XkbRules xorg EndSection [..] Section ServerLayout [..] InputDevice Keyboard0 CoreKeyboard EndSection No other keyboard is available. Xorg.1.log reads normal: (II) LoadModule: kbd (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor=X.Org Foundation compiled for 7.0.0, module version = 1.0.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.5 A diff between the log of the first (good) and the second (bad) X server does not show anything odd. Things used to work with earlier releases. I think things broke during a recent update, but I might be wrong. It might have appened already during an earlier one. Best regards Ben dpkg -l *xorg*|grep ii ii libglu1-xorg 7.0.20 transitional package for Debian etch ii xorg 7.0.20 X.Org X Window System ii xserver-xorg 7.0.20 the X.Org X server ii xserver-xorg-core1.0.2-8 X.Org X server -- core server ii xserver-xorg-input-all 7.0.20 the X.Org X server -- input driver metapacka ii xserver-xorg-input-evdev 1.0.0.5-2X.Org X server -- evdev input driver ii xserver-xorg-input-kbd 1.0.1.3-2X.Org X server -- keyboard input driver ii xserver-xorg-input-mouse 1.0.4-3 X.Org X server -- mouse input driver ii xserver-xorg-input-synaptics 0.14.4-5 Synaptics TouchPad driver for X.Org/XFree86 ii xserver-xorg-input-wacom 0.7.4.1-3X.Org X server -- wacom input driver ii xserver-xorg-video-apm 1.0.1.5-2X.Org X server -- APM display driver ii xserver-xorg-video-ati 6.5.8.0-1X.Org X server -- ATI display driver ii xserver-xorg-video-chips 1.0.1.3-3X.Org X server -- Chips display driver ii xserver-xorg-video-dummy 0.1.0.5-2X.Org X server -- dummy display driver ii xserver-xorg-video-fbdev 0.1.0.5-2X.Org X server -- fbdev display driver ii xserver-xorg-video-glint 1.0.1.3-3X.Org X server -- Glint display driver ii xserver-xorg-video-neomagic 1.0.0.5-2X.Org X server -- Neomagic display driver ii xserver-xorg-video-nsc 2.7.6.5-2X.Org X server -- NSC display driver ii xserver-xorg-video-nv1.0.1.5-2X.Org X server -- NV display driver ii xserver-xorg-video-rendition 4.0.1.3.dfsg.1-2 X.Org X server -- Rendition display driver ii xserver-xorg-video-s3virge 1.8.6.5-2X.Org X server -- S3 ViRGE display driver ii xserver-xorg-video-savage2.0.2.3-4X.Org X server -- Savage display driver ii xserver-xorg-video-siliconmotion 1.3.1.5-3X.Org X server -- SiliconMotion display driv ii xserver-xorg-video-sis 0.8.1.3-2X.Org X server -- SiS display driver ii xserver-xorg-video-sisusb0.7.1.3-2X.Org X server -- SiS USB display driver ii xserver-xorg-video-tdfx 1.1.1.3-3X.Org X server -- tdfx display driver ii xserver-xorg-video-tga 1.0.0.5-3X.Org X server -- TGA display driver ii xserver-xorg-video-trident 1.0.1.2-2X.Org X server -- Trident display driver ii xserver-xorg-video-tseng 1.0.0.5-2X.Org X server -- Tseng display driver ii xserver-xorg-video-v4l
Bug#131614: marked as done (xserver-xfree86: [ati/radeon, s3virge] using DRI module crashes dual-head Radeon, ViRGE/VX configuration)
Your message dated Tue, 01 May 2007 23:42:09 +0200 with message-id [EMAIL PROTECTED] and subject line Undelivered Mail Returned to Sender has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: xserver-xfree86 Version: 4.1.0-13 Severity: normal That's a lot of information. Basically, I have a dual monitor setup using two cards, a AGP Radeon and a PCI S3Virge/VX. Both cards work by themselves, and the Radeon will even successfully use direct rendering and accelleartion -- very nice. They will not, however, run together with two screens unless I disable the Load dri module. This causes a nice system crash -- total lockup for all terminals, though it is still possible to term in and reboot the machine (but restarting or killing the processes will not allow you to restart X or get back to a regular terminal). The below config is an example that works -- dri is commented out. If I enable that one line it will lock the whole system. The log doesn't say much about an error, but the last thing it tries to do is load /usr/X11R6/lib/modules/librac.a then crashes and hangs all local terms. Not really a show stopper in the grand scheme of things, since I can still run one configurations or the other -- dri enable for one screen or no dri and have both screens, but I thought I'd report this anyway. -Curtis Nelson [EMAIL PROTECTED] 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY 02:09.0 VGA compatible controller: S3 Inc. 86c988 [ViRGE/VX] (rev 02) 01:00.0 Class 0300: 1002:5159 02:09.0 Class 0300: 5333:883d (rev 02) ### BEGIN DEBCONF SECTION # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the # Debian X Configuration tool, using values from the debconf database. # # Edit this file with caution, and see the XF86Config-4 manual page. # (Type man XF86Config-4 at the shell prompt.) # # If you want your changes to this file preserved by dexconf, only make changes # before the ### BEGIN DEBCONF SECTION line above, and/or after the # ### END DEBCONF SECTION line below. Section Files FontPathunix/:7100# local font server # if the local font server has problems, we can fall back on these FontPath/usr/lib/X11/fonts/misc FontPath/usr/lib/X11/fonts/cyrillic FontPath/usr/lib/X11/fonts/100dpi/:unscaled FontPath/usr/lib/X11/fonts/75dpi/:unscaled FontPath/usr/lib/X11/fonts/Type1 FontPath/usr/lib/X11/fonts/Speedo FontPath/usr/lib/X11/fonts/100dpi FontPath/usr/lib/X11/fonts/75dpi EndSection Section Module # LoadGLcore # Loadbitmap Loaddbe # Loadddc # Loaddri Loadextmod Loadfreetype Loadglx # Loadint10 Loadpex5 Loadrecord Loadspeedo Loadtype1 # Loadvbe Loadxie EndSection Section InputDevice Identifier Generic Keyboard Driver keyboard Option CoreKeyboard Option XkbRules xfree86 Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/psaux Option Protocol ImPS/2 Option Emulate3Buttons true Option ZAxisMapping 4 5 EndSection #Section InputDevice # Identifier Generic Mouse # Driver mouse # Option SendCoreEventstrue # Option Device/dev/input/mice # Option Protocol ImPS/2 # Option Emulate3Buttons true # Option ZAxisMapping 4 5 #EndSection Section Device Identifier Generic Video Card Driver ati BusID PCI:1:0:0 EndSection Section Device Identifier Secondary Video Card Driver s3virge BusID PCI:2:9:0 EndSection Section Monitor Identifier Generic Monitor HorizSync 30-120 VertRefresh 50-160 Option DPMS EndSection Section Monitor Identifier Secondary Monitor HorizSync 30-60
Processed: bug 181423 is forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=10828
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.2 forwarded 181423 https://bugs.freedesktop.org/show_bug.cgi?id=10828 Bug#181423: xserver-xfree86: [core server] should not change keyboard repeat settings on non-X VCs Noted your statement that Bug has been forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=10828. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Xorg 7.2-3 package broken
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, First, i'm not a suscriber of this list, because this, please CC me the replys. Well, the interest of this mail. Last upstream of Xorg package, update to 7.2 series (package Xserver-xorg 7.2-3, fail to configure on amd64 variation (i don't know in the other archs). On the last update, i have the script running for 4 hours. Passed these time, i breaked the process with CTRL+C. This is the on-screen debug: Do you want to continue [Y/n]? Setting up xserver-xorg (7.2-3) ... Received signal. Aborting xserver-xorg package postinst script. dpkg: error processing xserver-xorg (--configure): subprocess post-installation script killed by signal (Interrupt) dpkg: dependency problems prevent configuration of xorg: xorg depends on xserver-xorg; however: Package xserver-xorg is not configured yet. dpkg: error processing xorg (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: xserver-xorg xorg E: Sub-process /usr/bin/dpkg returned an error code (1) Thanks for our attention. Er_Maqui - -- [EMAIL PROTECTED] || http://maqui.darkbolt.net Linux registered user number: #363219 PGP key avaliable at KeyServ. KeyID: 0x4233E9F2 - -- Los hombres somos esclavos de la historia -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGN7vTfFjA4EIz6fIRAp9tAKDi5gyJ8Zs3OQUzEVXEz0JzJtNIygCfXzt5 kXjg+b3B/xBEZdOO8HTVrPQ= =QrdY -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Xorg 7.2-3 package broken
On Wed, May 2, 2007 at 00:14:43 +0200, David Lopez Zajara (Er_Maqui) wrote: On the last update, i have the script running for 4 hours. Passed these time, i breaked the process with CTRL+C. This is the on-screen debug: Do you want to continue [Y/n]? Setting up xserver-xorg (7.2-3) ... Received signal. Aborting xserver-xorg package postinst script. Can you add 'set -x' somewhere in the first lines of /var/lib/dpkg/info/xserver-xorg.postinst, then run dpkg --configure -a, and send us the output (so we can see where it hangs)? Thanks, Julien signature.asc Description: Digital signature
x11proto-input 1.4.1-2 MIGRATED to testing
FYI: The status of the x11proto-input source package in Debian's testing distribution has changed. Previous version: 1.3.2-4 Current version: 1.4.1-2 -- This email is automatically generated; [EMAIL PROTECTED] is responsible. See http://people.debian.org/~henning/trille/ for more information. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xprint REMOVED from testing
FYI: The status of the xprint source package in Debian's testing distribution has changed. Previous version: 1:1.1.99.3+git20060910-9 Current version: (not in testing) Hint: Package not in unstable The script that generates this mail tries to extract removal reasons from comments in the britney hint files. Those comments were not originally meant to be machine readable, so if the reason for removing your package seems to be nonsense, it is probably the reporting script that got confused. Please check the actual hints file before you complain about meaningless removals. -- This email is automatically generated; [EMAIL PROTECTED] is responsible. See http://people.debian.org/~henning/trille/ for more information. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#401524: xorg hangs on Ultra1 with cgsix card
Hi, What's the status of this Xorg hang on Ultra1 with a cgsix board? The driver did not change a lot for a while. I don't even see where the problem with default depth not being 8 has been fixed as Jurij reported. So unless the bug got magically fixed by upgrading to xserver-xorg-core 1.3 (currently in unstable), I guess we should forward this bug upstream? Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#390913: Problem still present in 2.0.0-1
Hello, since there are opposite reports about this problem, I'd like to let you know that this problem still persists, using: xserver-xorg 7.2-3 xserver-xorg-core1.3.0.0.dfsg-3 xserver-xorg-video-i810 2.0.0-1 The problem instantly disappears after downgrading to 1.7.2-4 from testing, though even with this version, suspending has the sideeffect, that the mouse-cursor becomes invisible, so I have to restart gdm to use my mouse again. Adrian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421847: No xv-video with mplayer/totem (blue screen only)
Package: xserver-xorg-video-i810 Version: 2.0.0-1 I can get no video output using the xv-driver with mplayer,totem,etc when using version 2.0.0-1 of the xserver-xorg-video-i810 driver, the screen remains blue. Audio is fine. Downgrading to version 1.7.2-4 (testing) fixes this problem immediately. Packages: dpkg -l xserver-xorg\* |grep ^ii ii xserver-xorg 7.2-3the X.Org X server ii xserver-xorg-core1.3.0.0.dfsg-3 X.Org X server -- core server ii xserver-xorg-input-all 7.2-3the X.Org X server -- input driver metapacka ii xserver-xorg-input-evdev 1.1.2-6 X.Org X server -- evdev input driver ii xserver-xorg-input-kbd 1.1.0-4 X.Org X server -- keyboard input driver ii xserver-xorg-input-mouse 1.1.1-3 X.Org X server -- mouse input driver ii xserver-xorg-input-synaptics 0.14.6-1 Synaptics TouchPad driver for X.Org/XFree86 ii xserver-xorg-input-wacom 0.7.4.1-6X.Org X server -- wacom input driver ii xserver-xorg-video-all 7.2-3the X.Org X server -- output driver metapack ii xserver-xorg-video-apm 1.1.1-3 X.Org X server -- APM display driver ii xserver-xorg-video-ark 0.6.0-3 X.Org X server -- ark display driver ii xserver-xorg-video-ati 6.6.3-2 X.Org X server -- ATI display driver ii xserver-xorg-video-chips 1.1.1-4 X.Org X server -- Chips display driver ii xserver-xorg-video-cirrus1.1.0-3 X.Org X server -- Cirrus display driver ii xserver-xorg-video-cyrix 1.1.0-4 X.Org X server -- Cyrix display driver ii xserver-xorg-video-dummy 0.2.0-3 X.Org X server -- dummy display driver ii xserver-xorg-video-fbdev 0.3.1-1 X.Org X server -- fbdev display driver ii xserver-xorg-video-glint 1.1.1-3 X.Org X server -- Glint display driver ii xserver-xorg-video-i128 1.2.0-3 X.Org X server -- i128 display driver ii xserver-xorg-video-i740 1.1.0-3 X.Org X server -- i740 display driver ii xserver-xorg-video-i810 1.7.2-4 X.Org X server -- Intel i8xx, i9xx display d ii xserver-xorg-video-imstt 1.1.0-3 X.Org X server -- IMSTT display driver ii xserver-xorg-video-mga 1.4.6.1.dfsg.1-2 X.Org X server -- MGA display driver ii xserver-xorg-video-neomagic 1.1.1-5 X.Org X server -- Neomagic display driver ii xserver-xorg-video-newport 0.2.0-3 X.Org X server -- Newport display driver ii xserver-xorg-video-nsc 2.8.1-3 X.Org X server -- NSC display driver ii xserver-xorg-video-nv2.0.2-1 X.Org X server -- NV display driver ii xserver-xorg-video-rendition 4.1.0.dfsg.1-4 X.Org X server -- Rendition display driver ii xserver-xorg-video-s30.4.1-5 X.Org X server -- legacy S3 display driver ii xserver-xorg-video-s3virge 1.9.1-3 X.Org X server -- S3 ViRGE display driver ii xserver-xorg-video-savage2.1.2-3 X.Org X server -- Savage display driver ii xserver-xorg-video-siliconmotion 1.4.1-4 X.Org X server -- SiliconMotion display driv ii xserver-xorg-video-sis 0.9.1-4 X.Org X server -- SiS display driver ii xserver-xorg-video-sisusb0.8.1-3 X.Org X server -- SiS USB display driver ii xserver-xorg-video-tdfx 1.3.0-1 X.Org X server -- tdfx display driver ii xserver-xorg-video-tga 1.1.0-3 X.Org X server -- TGA display driver ii xserver-xorg-video-trident 1.2.3-1 X.Org X server -- Trident display driver ii xserver-xorg-video-tseng 1.1.0-3 X.Org X server -- Tseng display driver ii xserver-xorg-video-v4l 0.1.1-3 X.Org X server -- Video 4 Linux display driv ii xserver-xorg-video-vesa 1.3.0-1 X.Org X server -- VESA display driver ii xserver-xorg-video-vga 4.1.0-3 X.Org X server -- VGA display driver ii xserver-xorg-video-via 0.2.1-6 X.Org X server -- VIA display driver ii xserver-xorg-video-vmware10.13.0-3X.Org X server -- VMware display driver ii xserver-xorg-video-voodoo1.1.0-4 X.Org X server -- Voodoo display driver dpkg -l mplayer\* |grep ^ii ii mplayer 1.0-rc1svn20070225-0.3 The Ultimate Movie Player For Linux ii mplayer-skin-blue 1.6-1 blue skin for mplayer Kernel version is 2.6.21.1, but this also occurs with the current Debian stock-kernel (linux-image-2.6.18-4-686) and 2.6.19.1 and 2.6.20.6 (tested). Using
Bug#370067: xserver-xorg-video-via: via driver turns screen white, hsync out of range reported
Brice Goglin wrote: Hi Ariel, About a year ago, you reported a bug to the Debian BTS regarding the screen turning while with out of range hsync on the via driver. Did you reproduce this problem recently? With Xorg/Etch? If not, I will close this bug in the next weeks. Thanks, Brice This bug was corrected in an upstream version of the driver. It's working reasonably well (although 3D is very buggy) in version 1:0.2.1-6 0. Please go ahead and close this bug. Regards, Ariel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421847: No xv-video with mplayer/totem (blue screen only)
forcemerge 417860 421847 thank you Adrian Glaubitz wrote: I can get no video output using the xv-driver with mplayer,totem,etc when using version 2.0.0-1 of the xserver-xorg-video-i810 driver, the screen remains blue. Audio is fine. Yes, it's a known problem, the output is sent to the other monitor even if you don't have one :) Expected to be fixed in the next release of the driver. Merging with other bugs. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#370067: marked as done (xserver-xorg-video-via: via driver turns screen white, hsync out of range reported)
Your message dated Wed, 02 May 2007 02:43:47 +0200 with message-id [EMAIL PROTECTED] and subject line Bug#370067: xserver-xorg-video-via: via driver turns screen white, hsync out of range reported has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: xserver-xorg-video-via Version: 1:0.1.33.2-3 Severity: important Using the via driver causes my screen to turn white and freeze up my system. The xserver log (included below) reports that the hsync is out of range for every resolution and reports a bad mode clock. The log also reports an Unknown Card-Ids error as well. Older versions of the driver (prior to my upgrade to Xorg version 7) have also had this problem. I'm running Debian on an Averatec 3715-EH1 laptop, if that helps. I've also tried booting with both the noapic and acpi=off kernel options, but those have had no effect. 'lspci -v' reports: :00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Subsystem: TWINHEAD INTERNATIONAL Corp: Unknown device 0322 Flags: bus master, 66MHz, medium devsel, latency 8 Memory at d000 (32-bit, prefetchable) [size=64M] Capabilities: [80] AGP version 3.0 Capabilities: [50] Power Management version 2 Capabilities: [60] #08 [0060] Capabilities: [58] #08 [8001] :00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Subsystem: VIA Technologies, Inc. K8M800 Host Bridge Flags: bus master, medium devsel, latency 0 :00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Subsystem: VIA Technologies, Inc. K8M800 Host Bridge Flags: bus master, medium devsel, latency 0 :00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Subsystem: VIA Technologies, Inc. K8M800 Host Bridge Flags: bus master, medium devsel, latency 0 :00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Subsystem: VIA Technologies, Inc. K8M800 Host Bridge Flags: bus master, medium devsel, latency 0 :00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge Subsystem: VIA Technologies, Inc. K8M800 Host Bridge Flags: bus master, medium devsel, latency 0 :00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fc20-fe2f Prefetchable memory behind bridge: f210-fa0f Secondary status: SERR Capabilities: [80] Power Management version 2 :00:09.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01) Subsystem: Micro-Star International Co., Ltd.: Unknown device 6833 Flags: bus master, slow devsel, latency 64, IRQ 185 Memory at febfe000 (32-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 :00:0a.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) Subsystem: TWINHEAD INTERNATIONAL Corp: Unknown device 061a Flags: bus master, stepping, slow devsel, latency 168, IRQ 169 Memory at 2400 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 2000-21fff000 (prefetchable) Memory window 1: 2200-23fff000 I/O window 0: 1000-10ff I/O window 1: 1400-14ff 16-bit legacy interface ports at 0001 :00:0a.2 0805: O2 Micro, Inc.: Unknown device 7120 (rev 01) Subsystem: TWINHEAD INTERNATIONAL Corp: Unknown device 061a Flags: slow devsel, IRQ 11 Memory at febfdc00 (32-bit, non-prefetchable) [size=256] Capabilities: [a0] Power Management version 2 :00:0a.3 Bridge: O2 Micro, Inc.: Unknown device 7130 (rev 01) Subsystem: TWINHEAD INTERNATIONAL Corp: Unknown device 061a Flags: slow devsel, IRQ 11 Memory at febfc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [a0] Power Management version 2 :00:0a.4 FireWire (IEEE 1394): O2 Micro, Inc.: Unknown device 00f7 (rev 02) (prog-if 10 [OHCI]) Subsystem: O2 Micro, Inc.: Unknown device 00f7 Flags: bus master, medium devsel, latency 64, IRQ 169 Memory at 24001000 (32-bit, non-prefetchable) [size=4K] Memory at febfd000 (32-bit, non-prefetchable) [size=2K]
Processed: reassign 421847 to xserver-xorg-video-intel, forcibly merging 417860 421847
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.2 reassign 421847 xserver-xorg-video-intel Bug#421847: No xv-video with mplayer/totem (blue screen only) Bug reassigned from package `xserver-xorg-video-i810' to `xserver-xorg-video-intel'. forcemerge 417860 421847 Bug#417860: Xv plays only on external VGA Bug#421847: No xv-video with mplayer/totem (blue screen only) Bug#421418: xserver-xorg-video-intel: Can't play videos Forcibly Merged 417860 421418 421847. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#420402: Getting a better backtrace.
Raúl Sánchez Siles wrote: That backtrace doesn't seem very meaningful, maybe using a core dump backtrace would be better. How could a core dump backtrace be different or better? It seems pretty clear that it's jumping the the xf86SigHandler and losing all prior stack info before that. I do have a useful bit of info though. The crash only happens with my old xorg.conf. I let a new one be generated, and blobwars runs ok. The relevant change seems to be running at 24 bpp. If I switch it back to 16 I can reproduce the crash again. The diff: --- xorg.conf.200704301913502007-04-30 19:13:50.0 -0400 +++ xorg.conf 2007-04-30 19:13:50.0 -0400 @@ -1,10 +1,10 @@ -# /etc/X11/xorg.conf (xorg X Window System server configuration file) +# xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # -# Edit this file with caution, and see the /etc/X11/xorg.conf manual page. -# (Type man /etc/X11/xorg.conf at the shell prompt.) +# Edit this file with caution, and see the xorg.conf manual page. +# (Type man xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg @@ -15,35 +15,6 @@ # sudo dpkg-reconfigure -phigh xserver-xorg Section Files - FontPath/usr/share/fonts/X11/misc - FontPath/usr/X11R6/lib/X11/fonts/misc - FontPath/usr/share/fonts/X11/cyrillic - FontPath/usr/X11R6/lib/X11/fonts/cyrillic - FontPath/usr/share/fonts/X11/100dpi/:unscaled - FontPath/usr/X11R6/lib/X11/fonts/100dpi/:unscaled - FontPath/usr/share/fonts/X11/75dpi/:unscaled - FontPath/usr/X11R6/lib/X11/fonts/75dpi/:unscaled - FontPath/usr/share/fonts/X11/Type1 - FontPath/usr/X11R6/lib/X11/fonts/Type1 - FontPath/usr/share/fonts/X11/100dpi - FontPath/usr/X11R6/lib/X11/fonts/100dpi - FontPath/usr/share/fonts/X11/75dpi - FontPath/usr/X11R6/lib/X11/fonts/75dpi - # path to defoma fonts - FontPath/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType -EndSection - -Section Module - Loadi2c - Loadbitmap - Loadddc - Loaddri - Loadextmod - Loadfreetype - Loadglx - Loadint10 - Loadtype1 - Loadvbe EndSection Section InputDevice @@ -51,7 +22,7 @@ Driver kbd Option CoreKeyboard Option XkbRules xorg - Option XkbModel pc104 + Option XkbModel pc105 Option XkbLayout us EndSection @@ -60,7 +31,7 @@ Driver mouse Option CorePointer Option Device/dev/input/mice - Option Protocol ExplorerPS/2 + Option Protocol ImPS/2 Option Emulate3Buttons true EndSection @@ -71,16 +42,12 @@ Option Device/dev/psaux Option Protocol auto-dev Option HorizScrollDelta 0 - Option SHMConfig on EndSection Section Device Identifier Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller Driver i810 BusID PCI:0:2:0 - Option DRI - Option XAANoOffscreenPixmaps true - Option LinearAlloc 6144 EndSection Section Monitor @@ -92,24 +59,30 @@ Identifier Default Screen Device Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller Monitor Generic Monitor - DefaultDepth16 + DefaultDepth24 SubSection Display Depth 1 + Modes 1280x768 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 4 + Modes 1280x768 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 8 + Modes 1280x768 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 15 + Modes 1280x768 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 16 + Modes 1280x768 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 24 + Modes 1280x768 1024x768 800x600 640x480 EndSubSection EndSection @@ -119,14 +92,4 @@ InputDevice Generic Keyboard InputDevice Configured
Bug#421449: xserver-xorg: xinerama extension reported even when disabled
Still present in version 1:7.2-3 =
Bug#401524: xorg hangs on Ultra1 with cgsix card
The last action I took was to successfully build a debug version of the driver from source. Unfortunately, there is no bug in the sense of the program crashing or hanging or writing statements to an error log file. The monitor just goes dark and the computer thinks it working fine. I am willing to work on this, but I need help. Can anyone suggest where further debugging statements could be added? On Wed, 2007-05-02 at 00:55 +0200, Brice Goglin wrote: Hi, What's the status of this Xorg hang on Ultra1 with a cgsix board? The driver did not change a lot for a while. I don't even see where the problem with default depth not being 8 has been fixed as Jurij reported. So unless the bug got magically fixed by upgrading to xserver-xorg-core 1.3 (currently in unstable), I guess we should forward this bug upstream? Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xserver-xorg-video-ivtvdev: Changes to 'debian-unstable'
debian/changelog |6 ++ debian/control| 10 ++ debian/rules |2 +- debian/xsfbs/xsfbs.mk | 28 4 files changed, 37 insertions(+), 9 deletions(-) New commits: commit a7e9ebfa148f6f0722ce405887f733864963dc0d Author: Ian Campbell [EMAIL PROTECTED] Date: Wed May 2 05:52:12 2007 +0100 Call serverabi from binary-arch so auto provides and depends work. diff --git a/debian/rules b/debian/rules index a1b28c4..d96501a 100755 --- a/debian/rules +++ b/debian/rules @@ -69,7 +69,7 @@ install: build cd obj-$(DEB_BUILD_GNU_TYPE) $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install # Build architecture-dependent files here. -binary-arch: build install +binary-arch: build install serverabi dh_testdir dh_testroot commit 5c96e853347a5f3130c9ba5e0d4ebeebe9e0a2a3 Author: Ian Campbell [EMAIL PROTECTED] Date: Wed May 2 05:44:03 2007 +0100 Miscellaneous fixes to debian/control suggested by Brice Goglin diff --git a/debian/changelog b/debian/changelog index 460abeb..1b087ea 100644 --- a/debian/changelog +++ b/debian/changelog @@ -6,6 +6,12 @@ xserver-xorg-video-ivtvdev (0.10.6-2) UNRELEASED; urgency=low [ Ian Campbell ] * Include linux/types.h in ivtvhw.h. (Closes: #406032) + * Updates suggested by Brice Goglin: +- Pull latest xsfbs +- Use ${xviddriver:Provides} and ${xserver:Depends} +- Update build depends +- Added XS-Vcs-* + * Bumped standards version -- Ian Campbell [EMAIL PROTECTED] Tue, 20 Feb 2007 22:09:22 + diff --git a/debian/control b/debian/control index 7a10bf5..ba659c9 100644 --- a/debian/control +++ b/debian/control @@ -3,13 +3,15 @@ Section: contrib/x11 Priority: extra Maintainer: Debian X Strike Force debian-x@lists.debian.org Uploaders: David Nusinow [EMAIL PROTECTED], Ian Campbell [EMAIL PROTECTED] -Build-Depends: debhelper (= 5), quilt, pkg-config, xserver-xorg-dev (= 2:1.1.1-1), x11proto-video-dev, libxvmc-dev, x11proto-fonts-dev, x11proto-randr-dev, x11proto-render-dev, x11proto-xext-dev, ivtv-utils -Standards-Version: 3.7.2 +Build-Depends: debhelper (= 5), quilt, pkg-config, xserver-xorg-dev (= 2:1.2.99.902), x11proto-video-dev, libxvmc-dev, x11proto-fonts-dev, x11proto-randr-dev, x11proto-render-dev, x11proto-xext-dev, ivtv-utils +Standards-Version: 3.7.2.2 +XS-Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-video-ivtvdev +XS-Vcs-Browser: http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-video-ivtvdev.git Package: xserver-xorg-video-ivtv Architecture: alpha amd64 arm hppa hurd-i386 i386 ia64 kfreebsd-i386 m68k mips mipsel netbsd-i386 powerpc -Depends: ${shlibs:Depends}, ${misc:Depends}, xserver-xorg-core (= 2:1.1.1-11) -Provides: xserver-xorg-video-1.0 +Depends: ${shlibs:Depends}, ${misc:Depends}, ${xserver:Depends} +Provides: ${xviddriver:Provides} Description: X.Org X server -- IVTV display driver This package provides the driver for the overlay framebuffer provided by the iTVC15 family of MPEG codecs. The iTVC15 family includes the commit 271778bd6338575afa3e4ae7f614f38cdff8e2fb Author: Branden Robinson [EMAIL PROTECTED](none) Date: Thu Apr 12 23:18:32 2007 -0400 Test for existence of debian/patches directory before creating a symlink to it. This prevents packages that apply no patches from ending up with a broken symlink in them. Remove SVN keyword. Update copyright notice. diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk index d88c6db..63dde45 100755 --- a/debian/xsfbs/xsfbs.mk +++ b/debian/xsfbs/xsfbs.mk @@ -1,11 +1,10 @@ #!/usr/bin/make -f -# $Id$ -# Debian rules file for xorg-x11 source package +# Debian X Strike Force Build System (XSFBS): Make portion # Copyright 1996 Stephen Early # Copyright 1997 Mark Eichin -# Copyright 1998-2005 Branden Robinson +# Copyright 1998-2005, 2007 Branden Robinson # Copyright 2005 David Nusinow # # Licensed under the GNU General Public License, version 2. See the file @@ -127,7 +126,7 @@ $(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir if [ ! -e $(STAMP_DIR)/log ]; then \ mkdir $(STAMP_DIR)/log; \ fi; \ - if [ ! -e patches ]; then \ + if [ -e debian/patches ] [ ! -e patches ]; then \ ln -s debian/patches patches; \ fi; \ $@ commit 72811b4cede7275a35d36b44bcb5f431a8aa0133 Author: Julien Cristau [EMAIL PROTECTED] Date: Fri Mar 2 20:28:15 2007 +0100 Fix copy/paste typo in the input driver provides. diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk index 0343aec..d88c6db 100755 --- a/debian/xsfbs/xsfbs.mk +++ b/debian/xsfbs/xsfbs.mk @@ -359,7 +359,7 @@ VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2/dev/null) INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2/dev/null) SERVER_DEPENDS = xserver-xorg-core (= $(SERVERMINVERS)) VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI) -INPDRIVER_PROVIDES =
Bug#401524: xorg hangs on Ultra1 with cgsix card
Hi, I did experiment a bit with it finding the following: - kernel 2.4.x + XFree86 works - kernel 2.6.x + XFree86 fails (as in X is working but screen goes blank) - kernel 2.6.x + XOrg fails too . I didn't get time to test a Xorg with a 2.4.x kernel but looking at the driver changes in X I'd expect that working as well. If you need someone to test I'm happy to play with it (I don't have a Ultra 1 anymore but a Ultra 2 and same gfx card). Andre On Tue, 1 May 2007, John Zbesko wrote: The last action I took was to successfully build a debug version of the driver from source. Unfortunately, there is no bug in the sense of the program crashing or hanging or writing statements to an error log file. The monitor just goes dark and the computer thinks it working fine. I am willing to work on this, but I need help. Can anyone suggest where further debugging statements could be added? On Wed, 2007-05-02 at 00:55 +0200, Brice Goglin wrote: Hi, What's the status of this Xorg hang on Ultra1 with a cgsix board? The driver did not change a lot for a while. I don't even see where the problem with default depth not being 8 has been fixed as Jurij reported. So unless the bug got magically fixed by upgrading to xserver-xorg-core 1.3 (currently in unstable), I guess we should forward this bug upstream? Thanks, Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421854: libx11-6: opera: xcb_xlib.c:52 xcb_xlib_unlock: Assertion 'c-xlib.lock' failed.Aborted
Package: libx11-6 Version: 2:1.1-2 Severity: normal Hi Mr. Kroeger, I am no longer intensely involved in X Window System packaging for Debian. In the future, you can use the reportbug command from the Debian package of the same name to file bugs. It's interactive and very user-friendly, and will help you file a high-quality bug report. As I understand it, the XCB-linked Xlib has not yet propagated into unstable, so you must be running experimental libx11-6 packages. [Note to XSF: If I don't get to it first, please change the submitter on this report to Charlie Kroeger [EMAIL PROTECTED] as soon as it is convenient.] On Tue, May 01, 2007 at 11:43:09PM -0500, Charlie Kroeger wrote: Dear Mr. Robinson, This message I get when trying to start Opera from the command line: opera: xcb_xlib.c:52 xcb_xlib_unlock: Assertion 'c-xlib.lock' failed.Aborted I wrote the Opera Linux newsgroup and their man: Eirik Byrkjeflot Anonsen said: Ouch! This is a bug in xlib. Some people have been adding a new interface to X with some improvements over the old xlib stuff. The error message above says that the sequence of calls into xcb (the new interface) is wrong. Opera doesn't use xcb directly, so this is almost certainly a bug in xlib. I didn't know exactly where to file this report so I send it to you, Thanks for all your work on Debian. -- G. Branden Robinson|The errors of great men are Debian GNU/Linux |venerable because they are more [EMAIL PROTECTED] |fruitful than the truths of little http://people.debian.org/~branden/ |men. -- Friedrich Nietzsche signature.asc Description: Digital signature
Bug#421697: ATI Radeon x300 doesn't work anymore after upgrade
* Brice Goglin: Hi Florian, Could you try with the ATI driver currently in experimental (6.6.191)? Hi Brice, thanks for you reply. The current version of xserver-xorg-video-ati in experimental hasn't been build yet for amd64. I'll try to build it and will report back. Also, what kind of monitors do you have plugged to this ATI board? Just one TFT, over DVI connectors. Florian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: submitter 421854
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.2 submitter 421854 Charlie Kroeger [EMAIL PROTECTED] Bug#421854: libx11-6: opera: xcb_xlib.c:52 xcb_xlib_unlock: Assertion 'c-xlib.lock' failed.Aborted Changed Bug submitter from Branden Robinson [EMAIL PROTECTED] to Charlie Kroeger [EMAIL PROTECTED]. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]