Re: XFree86 4.0.3-0pre1v1 available for testing on powerpc sparc
Another powerpc success report. Have been running 4.0.3-0pre1v1 for several days now on an iMac (Rage 128) with no problems whatsoever.
Re: XFree86 4.0.3-0pre1v1 available for testing on powerpc sparc
Another powerpc success report. Have been running 4.0.3-0pre1v1 for several days now on an iMac (Rage 128) with no problems whatsoever. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
XFree 4.0.1-8 won't run on r128/ppc
I have a slot-loading iMac with Rage 128 video. All of the phase2 test packages of XFree86 4 ran fine on this machine. After upgrading xserver-xfree86 from phase2v27 to 4.0.1-8, the X server dies on startup with the following error (full log attached): (**) R128(0): Using framebuffer device (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.0.1f, module version = 0.0.2 (--) R128(0): Chipset: "ATI Rage 128 RL (AGP)" (ChipID = 0x524c) (--) R128(0): Linear framebuffer at 0x9400 (--) R128(0): MMIO registers at 0x9000 (--) R128(0): BIOS at 0x9002 (--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1) (WW) R128(0): Video BIOS not detected in PCI space! (WW) R128(0): Attempting to read Video BIOS from legacy ISA space! (WW) R128(0): Video BIOS not found! (II) R128(0): PLL parameters: rf=64483 rd=32888 min=2084831233 max=-1146748152; xclk=19296 (II) R128(0): initializing int10 (EE) R128(0): Cannot read V_BIOS (4) (II) Unloading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (EE) Screen(s) found, but none have a usable configuration. I've tried generating a new config file with dexter, turning UseFBDev on and off, and changing the driver from "r128" to "ati". The error is unchanged. The server will run if I use the fbdev driver, but without acceleration. I've attached my XFree86.0.log and XF86Config-4. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.0.1f / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 16 November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.17 ppc [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Tue Nov 28 11:43:39 2000 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "Default Layout" (**) |--Screen "Default Screen" (0) (**) | |--Monitor "Generic Monitor" (**) | |--Device "Generic Graphics Device" (**) |--Input Device "Generic Keyboard" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "macintosh" (**) XKB: model: "macintosh" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (**) |--Input Device "Generic Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/fonts/100dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 5 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.3 XFree86 XInput driver : 0.1 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.1f, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.1f, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:0b:0: chip 106b,0020 card , rev 00 class 06,00,00 hdr 00 (II) PCI: 00:10:0: chip 1002,524c card 1002,524c rev 00 class 03,80,00 hdr 00 (II) PCI: 00:17:0: chip 106b,0022 card , rev 02 class ff,00,00 hdr 00 (II) PCI: 00:18:0: chip 106b,0019 card , rev 00 class 0c,03,10 hdr 00 (II) PCI: 00:19:0: chip 106b,0019 card , rev 00 class 0c,03,10 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.0.1f, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) Bus -1: bridge is at (0:0:0), (-1,-1,0), BCTRL: 0x00
XFree 4.0.1-8 won't run on r128/ppc
I have a slot-loading iMac with Rage 128 video. All of the phase2 test packages of XFree86 4 ran fine on this machine. After upgrading xserver-xfree86 from phase2v27 to 4.0.1-8, the X server dies on startup with the following error (full log attached): (**) R128(0): Using framebuffer device (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor=The XFree86 Project compiled for 4.0.1f, module version = 0.0.2 (--) R128(0): Chipset: ATI Rage 128 RL (AGP) (ChipID = 0x524c) (--) R128(0): Linear framebuffer at 0x9400 (--) R128(0): MMIO registers at 0x9000 (--) R128(0): BIOS at 0x9002 (--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1) (WW) R128(0): Video BIOS not detected in PCI space! (WW) R128(0): Attempting to read Video BIOS from legacy ISA space! (WW) R128(0): Video BIOS not found! (II) R128(0): PLL parameters: rf=64483 rd=32888 min=2084831233 max=-1146748152; xclk=19296 (II) R128(0): initializing int10 (EE) R128(0): Cannot read V_BIOS (4) (II) Unloading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (EE) Screen(s) found, but none have a usable configuration. I've tried generating a new config file with dexter, turning UseFBDev on and off, and changing the driver from r128 to ati. The error is unchanged. The server will run if I use the fbdev driver, but without acceleration. I've attached my XFree86.0.log and XF86Config-4. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.0.1f / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 16 November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.17 ppc [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Tue Nov 28 11:43:39 2000 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Generic Monitor (**) | |--Device Generic Graphics Device (**) |--Input Device Generic Keyboard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel macintosh (**) XKB: model: macintosh (**) Option XkbLayout us (**) XKB: layout: us (**) |--Input Device Generic Mouse (WW) The directory /usr/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (**) FontPath set to /usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/fonts/100dpi (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 5 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.3 XFree86 XInput driver : 0.1 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.0.1f, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.0.1f, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:0b:0: chip 106b,0020 card , rev 00 class 06,00,00 hdr 00 (II) PCI: 00:10:0: chip 1002,524c card 1002,524c rev 00 class 03,80,00 hdr 00 (II) PCI: 00:17:0: chip 106b,0022 card , rev 02 class ff,00,00 hdr 00 (II) PCI: 00:18:0: chip 106b,0019 card , rev 00 class 0c,03,10 hdr 00 (II) PCI: 00:19:0: chip 106b,0019 card , rev 00 class 0c,03,10 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.0.1f, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.3 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) Bus -1: bridge is at (0:0:0), (-1,-1,0), BCTRL: 0x00 (VGA_EN is cleared) (II) Bus -1 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus -1 non-prefetchable memory
XF86 4 phase2 debs for PowerPC not APT-able
The size listed for xserver-xfree86_4.0.1-0phase2v5_powerpc.deb in powerpc/Packages.gz is 6746112, while the actual file is 8577356 bytes. This prevents APT from installing the package. The package installs without problems when downloaded manually.
XF86 4 phase2 debs for PowerPC not APT-able
The size listed for xserver-xfree86_4.0.1-0phase2v5_powerpc.deb in powerpc/Packages.gz is 6746112, while the actual file is 8577356 bytes. This prevents APT from installing the package. The package installs without problems when downloaded manually. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: /etc/X11/Xmodmap re-revisited
On Thu, 2 Mar 2000, Geert Uytterhoeven wrote: PReP takes a PS/2 keyboard PowerMac takes an ADB keyboard CHRP takes a PS/2 or ADB keyboard APUS takes an Amiga keyboard And some PowerMac clones (those made by Power Computing) can also use PS/2 keyboards.
