Bug#392514: problemwith XF86Config-4
On Fri, Oct 13, 2006 at 04:30:35PM -0500, Yosef Cohen wrote: > Below is more info. Could it be that the problem arises because the > motherboard also has an intel processor? Sun was touting this > configuration as two machines in one. Hi Yossi, Sorry to disappoint you, but the card you have is Sun Elite3D, which is not supported by X.org at this moment, to the best of my knowledge. The only thing I can recommend is to get a Creator or Elite 3D card, which are supported fine by the sunffb driver. Best regards, -- Jurij Smakov [EMAIL PROTECTED] Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#392514: problemwith XF86Config-4
Below is more info. Could it be that the problem arises because the motherboard also has an intel processor? Sun was touting this configuration as two machines in one. Thanks, Yossi Frans Pop wrote: On Thursday 12 October 2006 03:29, Yosef Cohen wrote: I installed sunffb as a graphics driver. Given the following, is this correct? Do you know the commercial name of your graphics card? "Intergraph Corporation" does not really ring a bell here. The commerical name of the graphics card is "Sun Expert3D". I believe it is manufactured by Lab3D, and on the card I see Wildcat. What is the PCI id (from 'lspci -n') for :01:01.0? turtle:~# lspci -n :00:00.0 0600: 108e:8000 :00:01.0 0680: 108e:1000 (rev 01) :00:01.1 0200: 108e:1001 (rev 01) :00:02.0 0680: 1011:0046 (rev 01) :00:03.0 0100: 1000:000f (rev 14) :00:03.1 0100: 1000:000f (rev 14) :01:00.0 0600: 108e:8000 :01:01.0 0300: 1091:07a0 (rev 64) Could you please send the output of 'prtconf -p -v' (from the sparc-utils package) to this bug report? Enclosed. Thanks. System Configuration: Sun Microsystems sun4u Memory size: 512 Megabytes System Peripherals (PROM Nodes): Node 0xf0029828 energystar-v2: idprom: 01800800.20edbf74..edbf74a9.... reset-reason: 'S-POR' interrupt-map: 003c...f005ff34.8033.003a...f005ff34.8034 interrupt-map-mask: 003e.. #interrupt-cells: 0001 #address-cells: 0002 breakpoint-trap: 007f #size-cells: 0002 model: 'SUNW,501-4450' name: 'SUNW,Ultra-60' clock-frequency: 06b4c378 banner-name: 'Sun Ultra 60 UPA/PCI (UltraSPARC-II 450MHz)' device_type: 'upa' Node 0xf002ca6c name: 'packages' Node 0xf0033bf0 iso6429-1983-colors: name: 'terminal-emulator' Node 0xf003692c disk-write-fix: name: 'deblocker' Node 0xf0036ff0 name: 'obp-tftp' Node 0xf0040c74 name: 'disk-label' Node 0xf005bbdc name: 'SUNW,builtin-drivers' Node 0xf00693b8 name: 'sun-keyboard' Node 0xf002cadc stdout: fff6f698 stdin: fff6f890 mmu: fffe8438 memory: fffe8638 bootargs: 00 bootpath: '/[EMAIL PROTECTED],4000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:a' gateway-ip: server-ip: client-ip: stdout-#lines: 0022 name: 'chosen' Node 0xf002cb48 version: 'OBP 3.23.1 1999/07/16 12:08' model: 'SUNW,3.23' decode-complete: aligned-allocator: relative-addressing: name: 'openprom' Node 0xf002cbd8 name: 'client-services' Node 0xf002cc80 scsi-initiator-id: '7' keyboard-click?: 'false' keymap: ttyb-rts-dtr-off: 'false' ttyb-ignore-cd: 'true' ttya-rts-dtr-off: 'false' ttya-ignore-cd: 'true' ttyb-mode: '9600,8,n,1,-' ttya-mode: '9600,8,n,1,-' pcia-probe-list: '1,2' pcib-probe-list: '1,3,2,4,5' enclosure-type: '540-3251' banner-name: 'Sun Ultra 60 UPA/PCI' energystar-enabled?: 'true' mfg-mode: 'off' diag-level: 'max' #power-cycles: '80' system-board-serial#: '5015606114319' system-board-date: '3a38a239' fcode-debug?: 'false' output-device: '/[EMAIL PROTECTED],2000/SUNW,[EMAIL PROTECTED]' input-device: 'keyboard' load-base: '16384' boot-command: 'boot' auto-boot?: 'true' watchdog-reboot?: 'false' diag-file: diag-device: 'net' boot-file: boot-device: '/[EMAIL PROTECTED],4000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:a disk:a disk net' local-mac-address?: 'false' ansi-terminal?: 'true' screen-#columns: '80' screen-#rows: '34' silent-mode?: 'false' use-nvramrc?: 'false' nvramrc: security-mode: 'none' security-password: security-#badlogins: '0' oem-logo: oem-logo?: 'false' oem-banner: oem-banner?: 'false' hardware-revision: last-hardware-update: diag-switch?: 'false' name: 'options' Node 0xf002ccf0 screen: '/[EMAIL PROTECTED],2000/SUNW,[EMAIL PROTECTED]' net: '/[EMAIL PROTECTED],4000/[EMAIL PROTECTED],1' disk: '/[EMAIL PROTECTED],4000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0' cdrom: '/[EMAIL PROTECTED],4000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:f' tape: '/[EMAIL PROTECTED],4000/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0' tape1: '/[EMAIL PROTECTED],4000/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0' tape0: '/[EMAI
Bug#392514: problemwith XF86Config-4
On Thursday 12 October 2006 03:29, Yosef Cohen wrote: > I installed sunffb as a graphics driver. > Given the following, is this correct? Do you know the commercial name of your graphics card? "Intergraph Corporation" does not really ring a bell here. What is the PCI id (from 'lspci -n') for :01:01.0? Could you please send the output of 'prtconf -p -v' (from the sparc-utils package) to this bug report? Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#392514: problemwith XF86Config-4
Package: xserver-xfree86 Version: latest I installed sunffb as a graphics driver. Given the following, is this correct? turtle:/etc/X11/gdm# lspci :00:00.0 Host bridge: Sun Microsystems Computer Corp. Psycho PCI Bus Module :00:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01) :00:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01) :00:02.0 Bridge: Digital Equipment Corporation DECchip 21554 (rev 01) :00:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) :00:03.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) :01:00.0 Host bridge: Sun Microsystems Computer Corp. Psycho PCI Bus Module :01:01.0 VGA compatible controller: Intergraph Corporation: Unknown device 07a0 (rev 64) XFree86.0.log and XF86Config-4 are enclosed. Thanks, Yosef Cohen XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge2 20061003014859 [EMAIL PROTECTED]) Release Date: 15 August 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.6.17-rc1 sparc [ELF] Build Date: 03 October 2006 This version of XFree86 has been extensively modified by the Debian Project, and is not supported by the XFree86 Project, Inc., in any way. Bugs should be reported to the Debian Bug Tracking System; see http://www.debian.org/Bugs/Reporting >. We strongly encourage the use of the "reportbug" package and command to ensure that bug reports contain as much useful information as possible. Before filing a bug report, you may want to consult the Debian X FAQ: XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz Module Loader present OS Kernel: Linux version 2.4.27-3-sparc64 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Fri Jun 2 07:35:41 UTC 2006 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Oct 12 07:48:48 2006 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "FD Premimum" (**) | |-->Device "sun ffb" (**) |-->Input Device "Generic Keyboard" (**) Option "XkbRules" "sun" (**) XKB: rules: "sun" (**) Option "XkbModel" "type5" (**) XKB: model: "type5" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Configured Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/lib/X11/fonts/CID" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 8 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 108e,8000 card , rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 108e,1000 card , rev 01 class 06,80,00 hdr 80 (II) PCI: 00:01:1: chip 108e,1001 card , rev 01 class 02,00,00 hdr 80 (II) PCI: 00:02:0: chip 1011,0046 card 108e,5043 rev 01 class 06,80,00 hdr 00 (II) PCI: 00:03:0: chip 1000,000f card , rev 14 class 01,00,00 hdr 80 (II) PCI: 00:03:1: chip 1000,000f card , rev 14 class 01,00,00 hdr 80 (II) PCI: 01:00:0: chip 108e,8000 card , rev 00 class 06,00,00 hdr 00 (II) PCI: 01:01:0: chip 1091,07a0 card 1091,0108 rev 64 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 2 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 2 0x - 0x7fff (0x8000) MX[B] (II) Bus 0 prefetchable m