[Desktop-packages] [Bug 780602] Re: nm-applet leaks memory and stops functioning after a while

[Mathieu Trudel-Lapierre]

Urgh, that's already tracked in bug 787736; no need to track it here.

** No longer affects: appmenu-gtk (Ubuntu)

** No longer affects: appmenu-gtk (Ubuntu Precise)

** No longer affects: appmenu-gtk (Ubuntu Quantal)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager-applet in Ubuntu.
https://bugs.launchpad.net/bugs/780602

Title:
  nm-applet leaks memory and stops functioning after a while

Status in OEM Priority Project:
  Fix Committed
Status in OEM Priority Project precise series:
  In Progress
Status in OEM Priority Project quantal series:
  Fix Committed
Status in “network-manager-applet” package in Ubuntu:
  Fix Released
Status in “network-manager-applet” source package in Precise:
  In Progress
Status in “network-manager-applet” source package in Quantal:
  Incomplete

Bug description:
  [Impact]
  This issue affects most and any users of nm-applet, especially in 
environments (such as offices) where the detected wireless networks change a 
lot, and where roaming can occur frequently.

  [Test Case]
  Run nm-applet for multiple hours:
   - Observe that the VPN Connections submenu still opens and lists connections 
(if VPN connections are configured)
   - Observe that the "More networks" submenu for additional detected wireless 
networks still opens and lists networks.

  A common failure case is where such a submenu will open but show an
  empty list (a piece of menu a few milimeters long).

  [Regression Potential]
  Minimal, the fixes have been available for a while in the development release 
(and in other recent releases) with no regressions; furthermore, this corrects 
"obviously" wrong memory handling without changing the effective behavior of 
the application.
  Possible issues could be introducing new memory leaks with the changes 
however, and although the risk is minimal, this could cause the same failure 
behavior as listed above under [Test Case].

  --

  nm-applet leaks memory in a fresh install of Natty, increasing to over
  200 Mb in 6-8 hours.  In addition the nm-applet embedded in the task
  bar becomes unresponsive after several hours.  Clicking on the applet
  will still show the popup menu, but none of the menu entries respond
  to mouse clicks.  When this happens, the "VPN connections" and "Other
  networks" menus also show up completely empty (only a small menu stub
  is displayed).

  ProblemType: Bug
  DistroRelease: Ubuntu 11.04
  Package: network-manager-gnome 0.8.4~git.20110318t152954.9c4c9a0-0ubuntu1
  ProcVersionSignature: Ubuntu 2.6.38-9.43-generic-pae 2.6.38.4
  Uname: Linux 2.6.38-9-generic-pae i686
  NonfreeKernelModules: nvidia
  Architecture: i386
  CRDA: Error: [Errno 2] No such file or directory
  Date: Tue May 10 11:53:09 2011
  EcryptfsInUse: Yes
  IfupdownConfig:
   auto lo
   iface lo inet loopback
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Beta i386 (20110413)
  IpRoute:
   192.168.2.0/24 dev eth0  proto kernel  scope link  src 192.168.2.12  metric 1
   169.254.0.0/16 dev eth0  scope link  metric 1000
   default via 192.168.2.1 dev eth0  proto static
  Keyfiles: Error: [Errno 2] No such file or directory
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, user)
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  SourcePackage: network-manager-applet
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/oem-priority/+bug/780602/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1088137] Re: colored snow all over, hangs under compiz

[drewp]

Rebooting and not using compiz fixes it. I haven't done tests to narrow
that down any more.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mesa in Ubuntu.
https://bugs.launchpad.net/bugs/1088137

Title:
  colored snow all over, hangs under compiz

Status in “mesa” package in Ubuntu:
  New

Bug description:
  I upgraded to 12.10 successfully and didn't see any graphics problems.
  Today, after my laptop was on for a while but not in a position where
  it would overheat, I had random colored pixels on the screen and the
  mouse position only refreshed a few times. dmesg contains "NVRM: Xid
  (:01:00): 31, Ch 0001, engmask 0101, intr 1000" but
  that's all I found. Rebooting didn't fix it; I got a crash soon after
  login. I went to xorg-edgers and non-compiz desktop, and now I can
  work but there is still colored snow accumulating all over.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: xorg 1:7.7+1ubuntu4
  ProcVersionSignature: Ubuntu 3.7.0-4.12-generic 3.7.0-rc7
  Uname: Linux 3.7.0-4-generic x86_64
  NonfreeKernelModules: nvidia
  .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: 
'/proc/driver/nvidia/gpus/0'
  .proc.driver.nvidia.registry: Binary: ""
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86_64 Kernel Module  310.19  Thu Nov  8 00:52:03 
PST 2012
   GCC version:  gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1)
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  Date: Sun Dec  9 00:23:55 2012
  DistUpgraded: 2012-11-24 01:14:04,814 DEBUG enabling apt cron job
  DistroCodename: quantal
  DistroVariant: ubuntu
  DkmsStatus:
   nvidia-current, 310.19, 3.5.0-19-generic, x86_64: installed
   nvidia-current, 310.19, 3.7.0-4-generic, x86_64: installed
   virtualbox, 4.1.18, 3.2.0-32-generic, x86_64: installed
   virtualbox, 4.1.18, 3.5.0-18-generic, x86_64: installed
   virtualbox, 4.1.18, 3.5.0-19-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   NVIDIA Corporation Device [10de:1251] (rev a1) (prog-if 00 [VGA controller])
 Subsystem: Micro-Star International Co., Ltd. Device [1462:10a9]
  InstallationDate: Installed on 2011-09-08 (457 days ago)
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1)
  JockeyStatus:
   kmod:nvidia_experimental_304 - Experimental NVIDIA binary Xorg driver, 
kernel module and VDPAU library (Proprietary, Disabled, Not in use)
   kmod:nvidia_experimental_310 - Experimental NVIDIA binary Xorg driver, 
kernel module and VDPAU library (Proprietary, Disabled, Not in use)
   kmod:nvidia_current - nvidia_current (Proprietary, Enabled, Not in use)
   kmod:nvidia_current_updates - NVIDIA binary Xorg driver, kernel module and 
VDPAU library (Proprietary, Disabled, Not in use)
  MarkForUpload: True
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/zsh
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-4-generic 
root=UUID=3efdfb1e-397e-4c2a-ab46-8ec5a1a382d9 ro quiet splash
  SourcePackage: xorg
  UpgradeStatus: Upgraded to quantal on 2012-11-24 (14 days ago)
  dmi.bios.date: 05/20/2011
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: E16F2IG6 V3.05
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: MS-16F2
  dmi.board.vendor: Micro-Star International Co., Ltd.
  dmi.board.version: To be filled by O.E.M.
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 10
  dmi.chassis.vendor: Micro-Star International
  dmi.chassis.version: To be filled by O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrE16F2IG6V3.05:bd05/20/2011:svn:pn:pvrTobefilledbyO.E.M.:rvnMicro-StarInternationalCo.,Ltd.:rnMS-16F2:rvrTobefilledbyO.E.M.:cvnMicro-StarInternational:ct10:cvrTobefilledbyO.E.M.:
  dmi.product.version: To be filled by O.E.M.
  version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu0.1
  version.ia32-libs: ia32-libs 20090808ubuntu36
  version.libdrm2: libdrm2 2.4.40+git20121123.171666e4-0ubuntu0ricotz2~quantal
  version.libgl1-mesa-dri: libgl1-mesa-dri 
9.1~git20121204.ec83535c-0ubuntu0ricotz~quantal
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 
9.1~git20121204.ec83535c-0ubuntu0ricotz~quantal
  version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
  version.xserver-xorg-core: xserver-xorg-core 
2:1.13.0.902+git20121207+server-1.13-branch.ede07c1a-0ubuntu0ricotz~quantal
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:7.0.99+git20121207.793e1b0e-0ubuntu0sarvatt
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.20.15+git20121207.4bfc5e90-0ubuntu0sarvatt~quantal
  version.xserver-xorg-video-nouveau:

[Desktop-packages] [Bug 780602] Re: nm-applet leaks memory and stops functioning after a while

[Mathieu Trudel-Lapierre]

After verification this particular fix (for appmenu-gtk, which directly
affects nm-applet leaking) is already present in quantal and raring, so
we're only targetting precise... I'm marking that task as In Progress
and I'll upload the fix from Alex shortly.

** Changed in: appmenu-gtk (Ubuntu Quantal)
   Status: In Progress => Fix Released

** Changed in: appmenu-gtk (Ubuntu Precise)
   Status: New => In Progress

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager-applet in Ubuntu.
https://bugs.launchpad.net/bugs/780602

Title:
  nm-applet leaks memory and stops functioning after a while

Status in OEM Priority Project:
  Fix Committed
Status in OEM Priority Project precise series:
  In Progress
Status in OEM Priority Project quantal series:
  Fix Committed
Status in “appmenu-gtk” package in Ubuntu:
  Fix Released
Status in “network-manager-applet” package in Ubuntu:
  Fix Released
Status in “appmenu-gtk” source package in Precise:
  In Progress
Status in “network-manager-applet” source package in Precise:
  In Progress
Status in “appmenu-gtk” source package in Quantal:
  Fix Released
Status in “network-manager-applet” source package in Quantal:
  Incomplete

Bug description:
  [Impact]
  This issue affects most and any users of nm-applet, especially in 
environments (such as offices) where the detected wireless networks change a 
lot, and where roaming can occur frequently.

  [Test Case]
  Run nm-applet for multiple hours:
   - Observe that the VPN Connections submenu still opens and lists connections 
(if VPN connections are configured)
   - Observe that the "More networks" submenu for additional detected wireless 
networks still opens and lists networks.

  A common failure case is where such a submenu will open but show an
  empty list (a piece of menu a few milimeters long).

  [Regression Potential]
  Minimal, the fixes have been available for a while in the development release 
(and in other recent releases) with no regressions; furthermore, this corrects 
"obviously" wrong memory handling without changing the effective behavior of 
the application.
  Possible issues could be introducing new memory leaks with the changes 
however, and although the risk is minimal, this could cause the same failure 
behavior as listed above under [Test Case].

  --

  nm-applet leaks memory in a fresh install of Natty, increasing to over
  200 Mb in 6-8 hours.  In addition the nm-applet embedded in the task
  bar becomes unresponsive after several hours.  Clicking on the applet
  will still show the popup menu, but none of the menu entries respond
  to mouse clicks.  When this happens, the "VPN connections" and "Other
  networks" menus also show up completely empty (only a small menu stub
  is displayed).

  ProblemType: Bug
  DistroRelease: Ubuntu 11.04
  Package: network-manager-gnome 0.8.4~git.20110318t152954.9c4c9a0-0ubuntu1
  ProcVersionSignature: Ubuntu 2.6.38-9.43-generic-pae 2.6.38.4
  Uname: Linux 2.6.38-9-generic-pae i686
  NonfreeKernelModules: nvidia
  Architecture: i386
  CRDA: Error: [Errno 2] No such file or directory
  Date: Tue May 10 11:53:09 2011
  EcryptfsInUse: Yes
  IfupdownConfig:
   auto lo
   iface lo inet loopback
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Beta i386 (20110413)
  IpRoute:
   192.168.2.0/24 dev eth0  proto kernel  scope link  src 192.168.2.12  metric 1
   169.254.0.0/16 dev eth0  scope link  metric 1000
   default via 192.168.2.1 dev eth0  proto static
  Keyfiles: Error: [Errno 2] No such file or directory
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, user)
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  SourcePackage: network-manager-applet
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/oem-priority/+bug/780602/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 780602] Re: nm-applet leaks memory and stops functioning after a while

[Mathieu Trudel-Lapierre]

** Also affects: appmenu-gtk (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: appmenu-gtk (Ubuntu)
   Status: New => Fix Released

** Changed in: appmenu-gtk (Ubuntu Quantal)
   Status: New => In Progress

** Changed in: appmenu-gtk (Ubuntu Quantal)
   Importance: Undecided => Medium

** Changed in: appmenu-gtk (Ubuntu Precise)
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager-applet in Ubuntu.
https://bugs.launchpad.net/bugs/780602

Title:
  nm-applet leaks memory and stops functioning after a while

Status in OEM Priority Project:
  Fix Committed
Status in OEM Priority Project precise series:
  In Progress
Status in OEM Priority Project quantal series:
  Fix Committed
Status in “appmenu-gtk” package in Ubuntu:
  Fix Released
Status in “network-manager-applet” package in Ubuntu:
  Fix Released
Status in “appmenu-gtk” source package in Precise:
  New
Status in “network-manager-applet” source package in Precise:
  In Progress
Status in “appmenu-gtk” source package in Quantal:
  In Progress
Status in “network-manager-applet” source package in Quantal:
  Incomplete

Bug description:
  [Impact]
  This issue affects most and any users of nm-applet, especially in 
environments (such as offices) where the detected wireless networks change a 
lot, and where roaming can occur frequently.

  [Test Case]
  Run nm-applet for multiple hours:
   - Observe that the VPN Connections submenu still opens and lists connections 
(if VPN connections are configured)
   - Observe that the "More networks" submenu for additional detected wireless 
networks still opens and lists networks.

  A common failure case is where such a submenu will open but show an
  empty list (a piece of menu a few milimeters long).

  [Regression Potential]
  Minimal, the fixes have been available for a while in the development release 
(and in other recent releases) with no regressions; furthermore, this corrects 
"obviously" wrong memory handling without changing the effective behavior of 
the application.
  Possible issues could be introducing new memory leaks with the changes 
however, and although the risk is minimal, this could cause the same failure 
behavior as listed above under [Test Case].

  --

  nm-applet leaks memory in a fresh install of Natty, increasing to over
  200 Mb in 6-8 hours.  In addition the nm-applet embedded in the task
  bar becomes unresponsive after several hours.  Clicking on the applet
  will still show the popup menu, but none of the menu entries respond
  to mouse clicks.  When this happens, the "VPN connections" and "Other
  networks" menus also show up completely empty (only a small menu stub
  is displayed).

  ProblemType: Bug
  DistroRelease: Ubuntu 11.04
  Package: network-manager-gnome 0.8.4~git.20110318t152954.9c4c9a0-0ubuntu1
  ProcVersionSignature: Ubuntu 2.6.38-9.43-generic-pae 2.6.38.4
  Uname: Linux 2.6.38-9-generic-pae i686
  NonfreeKernelModules: nvidia
  Architecture: i386
  CRDA: Error: [Errno 2] No such file or directory
  Date: Tue May 10 11:53:09 2011
  EcryptfsInUse: Yes
  IfupdownConfig:
   auto lo
   iface lo inet loopback
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Beta i386 (20110413)
  IpRoute:
   192.168.2.0/24 dev eth0  proto kernel  scope link  src 192.168.2.12  metric 1
   169.254.0.0/16 dev eth0  scope link  metric 1000
   default via 192.168.2.1 dev eth0  proto static
  Keyfiles: Error: [Errno 2] No such file or directory
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, user)
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  SourcePackage: network-manager-applet
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/oem-priority/+bug/780602/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1067789] Re: nautilus crashed with SIGSEGV

[terakin]

Maybe same bug (nautilus crash when copying & pasting a folder) is
happening on my Ubuntu 12.04 LTS (amd64). I could not paste apport
report just now, and I will report clearly when crash report is ready.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1067789

Title:
  nautilus crashed with SIGSEGV

Status in “nautilus” package in Ubuntu:
  Confirmed

Bug description:
  I was unable to copy/cut/rename files or directories.  Then nautilus
  crashed.

  ProblemType: Crash
  DistroRelease: Ubuntu 12.10
  Package: nautilus 1:3.5.90.really.3.4.2-0ubuntu4
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  NonfreeKernelModules: fglrx wl
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  CrashCounter: 1
  Date: Wed Oct 17 17:23:52 2012
  ExecutablePath: /usr/bin/nautilus
  GsettingsChanges:
   b'org.gnome.nautilus.window-state' b'geometry' b"'800x550+262+124'"
   b'org.gnome.nautilus.window-state' b'maximized' b'true'
   b'org.gnome.nautilus.window-state' b'sidebar-width' b'213'
   b'org.gnome.nautilus.window-state' b'start-with-status-bar' b'true'
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  ProcCmdline: nautilus -n
  ProcEnviron:
   PATH=(custom, no user)
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  SegvAnalysis:
   Segfault happened at: 0x7f458eddd8b3:mov0x30(%rbx),%rdi
   PC (0x7f458eddd8b3) ok
   source "0x30(%rbx)" (0x0004b8e3) not located in a known VMA region (needed 
readable region)!
   destination "%rdi" ok
  SegvReason: reading unknown VMA
  Signal: 11
  SourcePackage: nautilus
  StacktraceTop:
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
  Title: nautilus crashed with SIGSEGV
  UpgradeStatus: Upgraded to quantal on 2012-10-10 (7 days ago)
  UserGroups: adm cdrom dip lpadmin netdev plugdev sambashare sudo

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1067789/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 890986] Re: Lotus Notes is incompatible with ayatana scrollbars

[Mark Russell]

Quantal and precise verified.  Looks good!  Thanks!

** Tags removed: verification-needed

** Tags added: verification-done

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to light-themes in Ubuntu.
https://bugs.launchpad.net/bugs/890986

Title:
  Lotus Notes is incompatible with ayatana scrollbars

Status in Overlay Scrollbar:
  Confirmed
Status in The Unico Gtk+ Theming Engine:
  Invalid
Status in “light-themes” package in Ubuntu:
  Invalid
Status in “overlay-scrollbar” package in Ubuntu:
  Fix Released
Status in “light-themes” source package in Precise:
  Invalid
Status in “overlay-scrollbar” source package in Precise:
  Fix Committed
Status in “light-themes” source package in Quantal:
  Invalid
Status in “overlay-scrollbar” source package in Quantal:
  Fix Committed

Bug description:
  = Problem =

  When using Lotus notes with Unity the scrollbars do not display
  correctly. This uses gtk_paint_box, the theme for the scrollbar should
  be redrawn but is not.

  = Environment =

  * Ubuntu 11.10 (Oneiric) i386
  * Unity 4.22.0-0ubuntu3

  = Steps to reproduce =

  1. Compile scroll.cpp: g++ -o scroll scroll.cpp `pkg-config --libs 
gtk+-2.0``pkg-config --cflags gtk+-2.0`
  2. Launch it from a terminal
  3. Click on the buttons to make the scroll bar scroll up and down

  [Regression Potential]
  Minimal; adds Notes to the list of applications that won't get overlay 
scrollbars and instead revert to the GTK-style scrollbars. This would also 
affect any other applications using the same binary name: "lnotes", "notes".

  = Other Information =

  See screenshot attached (scrollbar-1.png)

To manage notifications about this bug go to:
https://bugs.launchpad.net/overlay-scrollbar/+bug/890986/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 942780] Re: Can't force audio output to be mono (if deaf in one ear)

[Adolfo Jayme Barrientos]

** No longer affects: ubuntu-docs (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/942780

Title:
  Can't force audio output to be mono (if deaf in one ear)

Status in GNOME Control Center:
  New
Status in PulseAudio sound server:
  New
Status in “gnome-control-center” package in Ubuntu:
  Confirmed

Bug description:
  If you are deaf in one ear, it is a useful accessibility enhancement
  to flatten stereo output to mono.

  Ideally this would be an explicit option in the "Hearing" tab of the
  System Settings "Universal Access" panel, cross-linked from the Sound
  settings.

  In the meantime, though, it would be relatively simple to make this
  selectable in the "Mode" menu in the Sound panel's "Output" tab, when
  it otherwise wouldn't be selectable, and to document it as an
  accessibility feature in the help.

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-control-center/+bug/942780/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1067876] Re: [quantal] Missing "Safely Remove Drive" and "Eject" options from Quicklists. Only have "Unmount".

[Xartsak]

Safely Remove missing from ubuntu 12.10 qicklist ... 
do we have any solutions ... Unplugging any device while powered up is 
dangerous!

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/1067876

Title:
  [quantal] Missing "Safely Remove Drive" and "Eject" options from
  Quicklists. Only have "Unmount".

Status in GVFS:
  New
Status in Unity:
  Invalid
Status in “gvfs” package in Ubuntu:
  Invalid
Status in “udisks2” package in Ubuntu:
  Won't Fix

Bug description:
  In Ubuntu 12.04, I could right-click on my usb-external-harddrive's
  Unity-Task-Bar icon (launcher icon) and select "Safely Remove". Upon
  doing this, the icon would disappear and I would proceed in unplugging
  my external hard drive.

  However, since upgrading to Ubuntu 12.10, this option is no longer
  available in the context menus (Quicklists) for external drives.

  Instead, all I see is "Unmount", and after clicking "Unmount" the icon
  remains on the task-bar (launcher) and no indication is given that
  would imply that the unmount occurred successfully.

  The intent of this report is to bring back the "Safely Remove" option
  which (by making the icon disappear after selected) indicates that you
  may now safely removal your USB external hard drive (by unplugging its
  usb connector).

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: unity 6.8.0-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  Date: Wed Oct 17 14:55:17 2012
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: unity
  UpgradeStatus: Upgraded to quantal on 2012-10-04 (13 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gvfs/+bug/1067876/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 589204] Re: Evolution Setup Assistant dialog too large for netbook screens

[Adolfo Jayme Barrientos]

** No longer affects: evolution (Ubuntu Maverick)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evolution in Ubuntu.
https://bugs.launchpad.net/bugs/589204

Title:
  Evolution Setup Assistant dialog too large for netbook screens

Status in “evolution” package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: evolution

  Case ID: nrf-002
  ISO: UNE Maverick Alpha 1
  Computer: ASUS Eee 1005HA

  Running from a live session, the Evolution Setup Assistant dialog was
  too tall for the 1024x600 netbook screen, and I was unable to see the
  forward button to progress.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: evolution 2.30.1.2-3ubuntu1
  ProcVersionSignature: Ubuntu 2.6.34-5.13-generic 2.6.34
  Uname: Linux 2.6.34-5-generic i686
  Architecture: i386
  Date: Thu Jun  3 14:31:28 2010
  LiveMediaBuild: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Alpha i386 
(20100602.3)
  ProcEnviron:
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: evolution

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/589204/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1058471] Re: Printed page is misaligned

[Launchpad Bug Tracker]

[Expired for cups (Ubuntu) because there has been no activity for 60
days.]

** Changed in: cups (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1058471

Title:
  Printed page is misaligned

Status in “cups” package in Ubuntu:
  Expired

Bug description:
  Have been using this printer with Ubuntu since Hardy and it has worked
  perfectly.

  Since the upgrade to Precise (from Lucid) every print job results in
  half the A4 page being printed on one page and the rest being printed
  on a second page.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: cups 1.5.3-0ubuntu4
  ProcVersionSignature: Ubuntu 3.2.0-26.41-generic 3.2.19
  Uname: Linux 3.2.0-26-generic i686
  ApportVersion: 2.0.1-0ubuntu13
  Architecture: i386
  Date: Sat Sep 29 14:26:06 2012
  InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429)
  Lpstat: device for Kyocera-FS-1010: usb://Kyocera/FS-1010?serial=XZJ3Z35468
  MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
  Papersize: a4
  PpdFiles: Kyocera-FS-1010: Kyocera Mita FS-1010
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_AU.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-26-generic 
root=UUID=d549f296-d47b-42b8-b138-c1f3cf7c1a2c ro quiet splash vt.handoff=7
  SourcePackage: cups
  UpgradeStatus: Upgraded to precise on 2012-06-30 (91 days ago)
  dmi.bios.date: 05/06/2009
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P1.20
  dmi.board.name: A945GC
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP1.20:bd05/06/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnA945GC:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To Be Filled By O.E.M.
  dmi.product.version: To Be Filled By O.E.M.
  dmi.sys.vendor: To Be Filled By O.E.M.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1058471/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1019616] Re: Unity GPU memory usage

[Launchpad Bug Tracker]

[Expired for unity (Ubuntu) because there has been no activity for 60
days.]

** Changed in: unity (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity in Ubuntu.
Matching subscriptions: dp-unity
https://bugs.launchpad.net/bugs/1019616

Title:
  Unity GPU memory usage

Status in “unity” package in Ubuntu:
  Expired

Bug description:
  I have noticed that after i upgraded to ubuntu 11.10 my graphics are
  slower and choppy. 3D Apps are not smooth. Even firefox has as bad
  time in rendering/scrolling a page. I am running 12.04 right now,
  fully updated.

  I've done some research and came to the conclusion that unity fills to much 
of my memory AFTER i use the DASH. After a little bit of browsing through the 
lenses my graphics are very chopy. 
  I run: nvidia-smi -q -g 0 2>&1
  and got:
  Memory Usage
  Total   : 127 MB
  Used: 120 MB
  Free: 7 MB
  While it used only 80MB on startup. You may think that 127MB is very low but 
then why does gnome shell with effects runs smoothly? By the way, my card has 
512MB, i don't know why it is getting list as 127MB perhaps that's another 
bug.

  Pls tell me what you thing about this.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: unity 5.12-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.2.0-26.41-generic 3.2.19
  Uname: Linux 3.2.0-26-generic i686
  NonfreeKernelModules: nvidia
  .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: 
'/proc/driver/nvidia/gpus/0'
  .proc.driver.nvidia.registry: Binary: ""
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86 Kernel Module  295.40  Thu Apr  5 21:28:09 PDT 
2012
   GCC version:  gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.0.1-0ubuntu10
  Architecture: i386
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,workarounds,scale,expo,ezoom]
  CompositorRunning: compiz
  Date: Sat Jun 30 18:57:24 2012
  DistUpgraded: 2012-04-27 00:15:44,763 DEBUG enabling apt cron job
  DistroCodename: precise
  DistroVariant: ubuntu
  GraphicsCard:
   NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA 
controller])
 Subsystem: Giga-byte Technology Device [1458:34ee]
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1)
  JockeyStatus:
   xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, 
Enabled, In use)
   xorg:nvidia_current_updates - NVIDIA accelerated graphics driver 
(post-release updates) (Proprietary, Disabled, Not in use)
  Lsusb:
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 001 Device 002: ID 090c:71b3 Silicon Motion, Inc. - Taiwan (formerly 
Feiya Technology Corp.) 
   Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
  MachineType: Gigabyte Technology Co., Ltd. M68MT-S2
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-26-generic 
root=UUID=0c47a693-8a87-4d0d-adbd-e0d173bf7167 ro quiet splash vt.handoff=7
  SourcePackage: unity
  UpgradeStatus: Upgraded to precise on 2012-04-26 (64 days ago)
  dmi.bios.date: 11/15/2010
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F1
  dmi.board.name: M68MT-S2
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF1:bd11/15/2010:svnGigabyteTechnologyCo.,Ltd.:pnM68MT-S2:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnM68MT-S2:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: M68MT-S2
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.
  version.compiz: compiz 1:0.9.7.8-0ubuntu1
  version.libdrm2: libdrm2 2.4.32-1ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3.1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3.1
  version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
  version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.3
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20111219.aacbd629-0ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20111201+b5534a1-1build2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1019616/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.n

[Desktop-packages] [Bug 1066405] Re: Writer doesn't save final comment in .docx format

[Launchpad Bug Tracker]

[Expired for libreoffice (Ubuntu) because there has been no activity for
60 days.]

** Changed in: libreoffice (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1066405

Title:
  Writer doesn't save final comment in .docx format

Status in “libreoffice” package in Ubuntu:
  Expired

Bug description:
  What happens:
  In some cases, when saving a document with comments in .docx format, the last 
comment is not saved (other comments are saved as they should be.)  This 
happens only some of the time, and I can't find any factors that separate the 
cases where it works from the ones when it does not.  I have not experienced 
this when saving in .odt or .doc formats.

  What should happen:
  All comments should be saved.

  LO Writer 3.5.4.2
  Precise 64 bit

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1066405/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 686780] Re: USB format opens two nautilus windows

[Phillip Susi]

** Package changed: parted (Ubuntu) => nautilus (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/686780

Title:
  USB format opens two nautilus windows

Status in “nautilus” package in Ubuntu:
  New

Bug description:
  Binary package hint: parted

  Sorry that i reported this to parted, i don't know even if this is "parted" 
related.
  This is a general error which is present for a long time. When you format USB 
(the one that displays in desktop) with Right Click , Format, after format it 
opens two nautilus windows.

  Sorry if this is duplicate but i couldn't find it.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: parted 2.2-5ubuntu5.1
  ProcVersionSignature: Ubuntu 2.6.32-25.45-generic 2.6.32.21+drm33.7
  Uname: Linux 2.6.32-25-generic x86_64
  Architecture: amd64
  Date: Tue Dec  7 23:05:36 2010
  InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100429)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: parted

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/686780/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1090214] Re: thunderbird wrong language selectet german

[imthk2]

** Attachment added: "thunderbird_language.png"
   
https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/1090214/+attachment/3459550/+files/thunderbird_language.png

** Summary changed:

- thunderbird wrong language selectet german
+ thunderbird wrong language selected german

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/1090214

Title:
  thunderbird wrong language selected german

Status in “thunderbird” package in Ubuntu:
  New

Bug description:
  This happens on 12.04, 12.10, 13.04. The system language I choose
  during installation is german. When I look up my language it stats
  "Deutsch (Deutschland)" but in Thunderbird the language selected by
  default is "Deutsch/Belgien". This results in incorrect spell
  checking. The language in thunderbird should be "Deutsch/Deutschland"
  instead by default.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/1090214/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 686780] [NEW] USB format opens two nautilus windows

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

Binary package hint: parted

Sorry that i reported this to parted, i don't know even if this is "parted" 
related.
This is a general error which is present for a long time. When you format USB 
(the one that displays in desktop) with Right Click , Format, after format it 
opens two nautilus windows.

Sorry if this is duplicate but i couldn't find it.

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: parted 2.2-5ubuntu5.1
ProcVersionSignature: Ubuntu 2.6.32-25.45-generic 2.6.32.21+drm33.7
Uname: Linux 2.6.32-25-generic x86_64
Architecture: amd64
Date: Tue Dec  7 23:05:36 2010
InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100429)
ProcEnviron:
 LANG=en_US.utf8
 SHELL=/bin/bash
SourcePackage: parted

** Affects: nautilus (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug lucid
-- 
USB format opens two nautilus windows
https://bugs.launchpad.net/bugs/686780
You received this bug notification because you are a member of Desktop 
Packages, which is subscribed to nautilus in Ubuntu.

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1086613] Re: Please update to 23.0.1271.97

[Phill Whiteside]

Please update the chromium stable ppa so it can be advertised to people.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to chromium-browser in Ubuntu.
https://bugs.launchpad.net/bugs/1086613

Title:
  Please update to 23.0.1271.97

Status in “chromium-browser” package in Ubuntu:
  Triaged
Status in “chromium-browser” source package in Lucid:
  In Progress
Status in “chromium-browser” source package in Oneiric:
  In Progress
Status in “chromium-browser” source package in Precise:
  In Progress
Status in “chromium-browser” source package in Quantal:
  In Progress

Bug description:
  This update will bring all stable releases up to date.  Raring is
  blocked on bug 1084852.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1086613/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1090214] [NEW] thunderbird wrong language selectet german

[imthk2]

Public bug reported:

This happens on 12.04, 12.10, 13.04. The system language I choose during
installation is german. When I look up my language it stats "Deutsch
(Deutschland)" but in Thunderbird the language selected by default is
"Deutsch/Belgien". This results in incorrect spell checking. The
language in thunderbird should be "Deutsch/Deutschland" instead by
default.

** Affects: thunderbird (Ubuntu)
 Importance: Undecided
 Status: New

** Description changed:

- This happens on 12.04, 12.10, 13.04. The system language I chose during
+ This happens on 12.04, 12.10, 13.04. The system language I choose during
  installation is german. When I look up my language it stats "Deutsch
  (Deutschland)" but in Thunderbird the language selected by default is
  "Deutsch/Belgien". This results in incorrect spell checking. The
  language in thunderbird should be "Deutsch/Deutschland" instead by
  default.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/1090214

Title:
  thunderbird wrong language selectet german

Status in “thunderbird” package in Ubuntu:
  New

Bug description:
  This happens on 12.04, 12.10, 13.04. The system language I choose
  during installation is german. When I look up my language it stats
  "Deutsch (Deutschland)" but in Thunderbird the language selected by
  default is "Deutsch/Belgien". This results in incorrect spell
  checking. The language in thunderbird should be "Deutsch/Deutschland"
  instead by default.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/1090214/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1058672] Re: Can't add my Facebook account

[Christian Dysthe]

Having the same problem on Ubuntu 12.10 x64

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gwibber in Ubuntu.
https://bugs.launchpad.net/bugs/1058672

Title:
  Can't add my Facebook account

Status in Gwibber:
  Fix Released
Status in “gwibber” package in Ubuntu:
  Invalid
Status in “gwibber” source package in Precise:
  Fix Released

Bug description:
  Steps to reproduce:
  1. Open gwibber
  2. Open the accounts window
  3. Select and add new Facebook account
  4. Authorize using password

  What should happen:
  Facebook account is added to the accounts list

  What happens:
  Message appears: "Success"

  Ubuntu version: 12.04.1 LTS
  Gwibber version: 3.4.2

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gwibber 3.4.2-0ubuntu2
  ProcVersionSignature: Ubuntu 3.2.0-31.50-generic 3.2.28
  Uname: Linux 3.2.0-31-generic x86_64
  NonfreeKernelModules: nvidia wl
  ApportVersion: 2.0.1-0ubuntu13
  Architecture: amd64
  Date: Sat Sep 29 10:37:49 2012
  ExecutablePath: /usr/bin/gwibber
  InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64+mac 
(20120823.1)
  SourcePackage: gwibber
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gwibber/+bug/1058672/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 794419] Re: veary slow

[Adolfo Jayme Barrientos]

*** This bug is a duplicate of bug 794706 ***
https://bugs.launchpad.net/bugs/794706

** This bug has been marked a duplicate of bug 794706
   slow

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/794419

Title:
  veary slow

Status in “firefox” package in Ubuntu:
  New

Bug description:
  Binary package hint: firefox

  really slow

  ProblemType: Bug
  DistroRelease: Ubuntu 11.04
  Package: firefox 4.0.1+build1+nobinonly-0ubuntu0.11.04.1
  ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
  Uname: Linux 2.6.38-8-generic i686
  NonfreeKernelModules: fglrx
  Architecture: i386
  Date: Wed Jun  8 00:59:53 2011
  FirefoxPackages:
   firefox 4.0.1+build1+nobinonly-0ubuntu0.11.04.1
   flashplugin-installer 10.2.159.1ubuntu1
   adobe-flashplugin N/A
   icedtea-plugin 1.1~20110420-0ubuntu1
  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007)
  ProcEnviron:
   LANGUAGE=en_US:en
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: firefox
  UpgradeStatus: Upgraded to natty on 2011-05-01 (38 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/794419/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 794706] Re: slow

[Adolfo Jayme Barrientos]

Thank you for taking the time to report this bug and helping to make
Ubuntu better. Unfortunately, we cannot work on this bug because your
description didn't include enough information. You may find it helpful
to read "How to report bugs effectively"
http://www.chiark.greenend.org.uk/~sgtatham/bugs.html. We'd be grateful
if you would then provide a more complete description of the problem.

We have instructions on debugging some types of problems at
http://wiki.ubuntu.com/DebuggingProcedures

At a minimum, we need:
1. the specific steps or actions you took that caused you to encounter the 
problem,
2. the behavior you expected, and
3. the behavior you actually encountered (in as much detail as possible).
Thanks!

** Changed in: firefox (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/794706

Title:
  slow

Status in “firefox” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: firefox

  slow

  ProblemType: Bug
  DistroRelease: Ubuntu 11.04
  Package: firefox 4.0.1+build1+nobinonly-0ubuntu0.11.04.1
  ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
  Uname: Linux 2.6.38-8-generic i686
  NonfreeKernelModules: fglrx
  Architecture: i386
  Date: Wed Jun  8 11:57:54 2011
  FirefoxPackages:
   firefox 4.0.1+build1+nobinonly-0ubuntu0.11.04.1
   flashplugin-installer 10.2.159.1ubuntu1
   adobe-flashplugin N/A
   icedtea-plugin 1.1~20110420-0ubuntu1
  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007)
  ProcEnviron:
   LANGUAGE=en_US:en
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: firefox
  UpgradeStatus: Upgraded to natty on 2011-05-01 (38 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/794706/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1090213] [NEW] Ctrl+Alt+1 doesn't work as a keyboard shortcut

[Jem]

Public bug reported:

Hi,

I tried using Ctrl+Alt+1 as a shortcut, but after entering press the keys it 
rendered as 'Ctrl+Alt L'. I tried using Ctrl+Alt+1 to activate the shortcut, 
but nothing happend. Also I found that if you press the Alt key before the Ctrl 
key when entering the shortcut, then it will render as 'Alt+Control L'.
This doesn't happen if I use numpad to enter the one. Also, I can make 
shortcuts using 0,2-9 with out any problems.

ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: gnome-control-center 1:3.4.2-0ubuntu0.7
ProcVersionSignature: Ubuntu 3.2.0-34.53-generic-pae 3.2.33
Uname: Linux 3.2.0-34-generic-pae i686
NonfreeKernelModules: fglrx
ApportVersion: 2.0.1-0ubuntu15
Architecture: i386
Date: Fri Dec 14 12:55:58 2012
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012)
MarkForUpload: True
SourcePackage: gnome-control-center
UpgradeStatus: Upgraded to precise on 2012-04-27 (230 days ago)
usr_lib_gnome-control-center:
 activity-log-manager-control-center 0.9.4-0ubuntu3.1
 gnome-bluetooth 3.2.2-0ubuntu5
 indicator-datetime  0.3.94-0ubuntu2

** Affects: gnome-control-center (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-bug i386 precise running-unity

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/1090213

Title:
  Ctrl+Alt+1 doesn't work as a keyboard shortcut

Status in “gnome-control-center” package in Ubuntu:
  New

Bug description:
  Hi,

  I tried using Ctrl+Alt+1 as a shortcut, but after entering press the keys it 
rendered as 'Ctrl+Alt L'. I tried using Ctrl+Alt+1 to activate the shortcut, 
but nothing happend. Also I found that if you press the Alt key before the Ctrl 
key when entering the shortcut, then it will render as 'Alt+Control L'.
  This doesn't happen if I use numpad to enter the one. Also, I can make 
shortcuts using 0,2-9 with out any problems.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gnome-control-center 1:3.4.2-0ubuntu0.7
  ProcVersionSignature: Ubuntu 3.2.0-34.53-generic-pae 3.2.33
  Uname: Linux 3.2.0-34-generic-pae i686
  NonfreeKernelModules: fglrx
  ApportVersion: 2.0.1-0ubuntu15
  Architecture: i386
  Date: Fri Dec 14 12:55:58 2012
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012)
  MarkForUpload: True
  SourcePackage: gnome-control-center
  UpgradeStatus: Upgraded to precise on 2012-04-27 (230 days ago)
  usr_lib_gnome-control-center:
   activity-log-manager-control-center 0.9.4-0ubuntu3.1
   gnome-bluetooth 3.2.2-0ubuntu5
   indicator-datetime  0.3.94-0ubuntu2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1090213/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 969860] Re: fglrx uses 100% CPU when screen turns off (spinning in glXWaitVideoSyncSGI or glXSwapBuffers)

[Daniel van Vugt]

Gnome probably does not suffer from this bug if it doesn't have any
vsync enabled by default. That's equivalent to "WORKAROUND (2)" listed
at the top of the bug.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to fglrx-installer in Ubuntu.
https://bugs.launchpad.net/bugs/969860

Title:
  fglrx uses 100% CPU when screen turns off (spinning in
  glXWaitVideoSyncSGI or glXSwapBuffers)

Status in Compiz:
  Invalid
Status in Compiz 0.9.8 series:
  Invalid
Status in Compiz Core:
  Invalid
Status in AMD fglrx video driver:
  Confirmed
Status in The Ubuntu Power Consumption Project:
  Fix Released
Status in “compiz” package in Ubuntu:
  Invalid
Status in “fglrx-installer” package in Ubuntu:
  Confirmed
Status in “fglrx-installer-updates” package in Ubuntu:
  Confirmed
Status in “gnome-shell” package in Ubuntu:
  Invalid

Bug description:
  WORKAROUND (1):
  1. Open Catalyst Control Center.
  2. Go to 3D > More Settings.
  3. Set "Wait for vertical refresh" to "On, unless application specifies".
  And if that doesn't work, then also do:
  4. Run "ccsm"
  5. In Workarounds, enable "Force full screen redraw (buffer swap) on repaint".

  WORKAROUND (2):
  1. Run ccsm (from package compizconfig-settings-manager)
  2. In OpenGL > Sync To VBlank = OFF

  TEST CASE:
  1. Monitor compiz CPU usage (from /proc//stat or top in batch 
mode)
  2. In "brightness and lock" settings set "Turn screen off when inactive" to 1 
minute
  3. Wait until screen turns off
  4. Move mouse or press a key to turn screen back on
  5. Check the CPU usage from the monitor

  ACTUAL RESULT:
  When screen turns off compiz goes to 100%
  When the screen turns back on, cpu usage drops immediately to a normal value
  The graph attached shows %CPU of compiz with a sample per second. The graph 
has been captured on a system with  a Radeon HD5770 and fglrx if that matter

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: compiz 1:0.9.7.2-0ubuntu4
  ProcVersionSignature: Ubuntu 3.2.0-21.34-generic 3.2.13
  Uname: Linux 3.2.0-21-generic x86_64
  NonfreeKernelModules: fglrx
  .tmp.unity.support.test.0:

  ApportVersion: 2.0-0ubuntu1
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  Date: Sat Mar 31 10:17:48 2012
  DistUpgraded: 2012-02-01 00:15:24,616 DEBUG enabling apt cron job
  DistroCodename: precise
  DistroVariant: ubuntu
  MachineType: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-21-generic 
root=UUID=cf89ba34-108b-404d-9804-32d54a1df2ea ro quiet splash vt.handoff=7
  SourcePackage: compiz
  UpgradeStatus: Upgraded to precise on 2012-01-31 (59 days ago)
  dmi.bios.date: 07/23/2010
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: FD
  dmi.board.name: GA-890GPA-UD3H
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrFD:bd07/23/2010:svnGigabyteTechnologyCo.,Ltd.:pnGA-890GPA-UD3H:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-890GPA-UD3H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: GA-890GPA-UD3H
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.
  version.compiz: compiz 1:0.9.7.2-0ubuntu4
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.32-1ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu8
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20111219.aacbd629-0ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20111201+b5534a1-1build2

To manage notifications about this bug go to:
https://bugs.launchpad.net/compiz/+bug/969860/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1088782] Re: [radeon] vsync is lost after removing a monitor, resulting in tearing

[Daniel van Vugt]

Invalid for compiz it seems. Assuming it's a driver bug only.

** Changed in: compiz
   Status: Triaged => Invalid

** Changed in: compiz (Ubuntu)
   Status: New => Invalid

** Changed in: compiz
Milestone: 0.9.9.0 => None

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-ati in Ubuntu.
https://bugs.launchpad.net/bugs/1088782

Title:
  [radeon] vsync is lost after removing a monitor, resulting in tearing

Status in Compiz:
  Invalid
Status in “compiz” package in Ubuntu:
  Invalid
Status in “xserver-xorg-video-ati” package in Ubuntu:
  New

Bug description:
  Vsync is lost and significant tearing occurs after removing a monitor.
  Tested with compiz 0.9.9 revision 3521 on radeon.

  Test case:
  1. Start with one monitor. Verify no tearing occurs when moving windows.
  2. Enable two monitors in the Displays dialog. Verify no tearing occurs on 
either monitor.
  3. Disable (turn off) one monitor in the Display dialog so you're left with 
only one again.
  Expected: No tearing occurs when moving windows.
  Observed: Tearing occurs and won't go away until compiz is restarted.

To manage notifications about this bug go to:
https://bugs.launchpad.net/compiz/+bug/1088782/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1043759] Re: Display settings confirmation dialog appears out of the screen when disabling one monitor in a multi monitor setup

[Daniel van Vugt]

I was hoping a proper fix for bug 754508 would solve this. That would be
to force modal dialogs to centre over their parent windows. However we
have not implemented that in bug 754508 so this bug remains open.

** Changed in: compiz
   Status: New => Triaged

** Changed in: compiz
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/1043759

Title:
  Display settings confirmation dialog appears out of the screen when
  disabling one monitor in a multi monitor setup

Status in Compiz:
  Triaged
Status in “compiz” package in Ubuntu:
  Triaged
Status in “gnome-control-center” package in Ubuntu:
  Invalid

Bug description:
  I have a two monitors setup with the laptop screen and external
  monitor connected via VGA. This setup is illustrated in the attached
  screenshot from the display settings applet in the control center.

  * Taking that setup as a starting point,
  * Place the display settings window on laptop monitor ("bottom" display)
  * Click on the "off" button for the laptop monitor to disable it
  * Click the "apply" button to confirm settings

  Expected result:
  * Laptop monitor turns off
  * Display settings window moves to the current workspace on the active monitor
  * Popup dialog asking if I want to keep this configuration or revert it 
appears on same workspace as above

  Current result:
  * Laptop monitor turns off
  * Display settings window and popup dialog move to the workspace "down" from 
the currently active one

  In other words what is happening is that the windows that were in a
  disabled monitor gets moved to a workspace that has the same relation
  to the current one as the spatial relationship between monitors. For
  example if the laptop monitor was setup as being on the right of the
  external monitor, the window would be on the workspace to the right of
  the active one.

  This is clever, but extremely hard to guess for the user, especially
  if they don't normally use workspaces in their daily ubuntu usage.

  What's worse is that there's a timeout on the confirmation dialog that
  will keep ticking and will automatically revert the previous
  configuration when it expires, confusing the user even more.

  I don't mind keeping the clever behaviour but the display settings
  window should be an exception to that rule and should always appear on
  the active workspace on the active monitor. Or the workspace should
  switch automatically to the one where the window ends up being placed
  in.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: gnome-control-center 1:3.4.2-0ubuntu13
  ProcVersionSignature: Ubuntu 3.5.0-13.13-generic 3.5.3
  Uname: Linux 3.5.0-13-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.5.1-0ubuntu3
  Architecture: i386
  Date: Thu Aug 30 12:50:20 2012
  EcryptfsInUse: Yes
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 
(20120423)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center
  UpgradeStatus: Upgraded to quantal on 2012-08-29 (0 days ago)
  usr_lib_gnome-control-center:
   activity-log-manager-control-center 0.9.4-0ubuntu3
   deja-dup23.90-0ubuntu1
   gnome-control-center-signon 0.0.13-0ubuntu1
   indicator-datetime  12.10.0-0ubuntu1

To manage notifications about this bug go to:
https://bugs.launchpad.net/compiz/+bug/1043759/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1081702] Re: Update the default wallpaper in 13.04

[Daniel van Vugt]

I don't know if you can get the physical colour depth from the EDID but
doubt it.

When I first encountered such a problem it was a Macbook Air 11" with
Nvidia graphics. I was shocked, but the good news is that the Nvidia
driver does temporal dithering, so it looks nice (once you turn that
feature on). Such temporal dithering done in the driver looks much nicer
than doing it statically in an image. And of course, this is only the
wallpaper. We can't easily fix it for the graphics you see in your
application windows.

Changing wallpaper is a trivial workaround, but it does disappoint me
that we're degrading the quality feel of the out-of-box experience.
Anyway, it's up to design...

P.S. I use this awesome image to test if a display is any good:
http://www.nasa.gov/multimedia/imagegallery/image_feature_347.html
Looking at that gradient it becomes pretty obvious if you have a crumby 6-bit 
panel.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ubuntu-wallpapers in Ubuntu.
https://bugs.launchpad.net/bugs/1081702

Title:
  Update the default wallpaper in 13.04

Status in Ayatana Design:
  Fix Committed
Status in “ubuntu-wallpapers” package in Ubuntu:
  Fix Released

Bug description:
  We have got the 13.04 wallpaper ready ahead of schedule, so we might
  as well get it in the distro now ;-)

  See attached file "ubuntu_default_13_04.jpg"

  
  

  This change is part of a larger set of icon changes, the other bugs
  that are part of this same change request are:

  bug #1081704 (Dash - update the 'App Lens' icon asset in the Dash bottom lens 
nav bar)
  bug #1081702 (Update the default wallpaper in 13.04)
  bug #838854 (Workspaces, Launcher - The workspace Launcher icon should change 
depending on which workspace is currently being utilised)
  bug #1081697 (Launcher - Update BFB icon to use a new special asset)
  bug #1081687 (Launcher - Update Launcher tile assets)
  bug #1081691 (Launcher - Update the icons used for the Software Centre, 
Nautilus, and Software Updater)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ayatana-design/+bug/1081702/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 996903] Re: Evolution crashes ater attempting to save changes to a contact

[Mark Stock]

This describes my problems as well. The problem occurs reliably every
time I open two contacts, copy/paste an e-mail address from one to the
other, then save the changed contact.

Here is some information that may be useful:

Ubuntu 12.10
evolution 3.6.0-0ubuntu3
3.5.0-19-generic kernel

Error messages from the crash are consistently:

(evolution:16430): GLib-GObject-WARNING **: cannot register existing
type `EABContactDisplay'

(evolution:16430): GLib-CRITICAL **: g_once_init_leave: assertion
`result != 0' failed

** (evolution:16430): ERROR **: eab-contact-commit-duplicate-detected.ui: 
Invalid type function on line 61: 'eab_contact_display_get_type'
Trace/breakpoint trap (core dumped)

GDB reports a bunch of threads in "poll" and
"pthread_cond_wait@@GLIBC_2.3.2", and one thread:

Thread 1 (Thread 0x7fffe33349c0 (LWP 20412)):
#0  0x74265c7f in g_logv () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#1  0x74265e42 in g_log () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#2  0x7775a7e6 in e_load_ui_builder_definition () from 
/usr/lib/evolution/3.6/libevolution-utils.so.0
#3  0x7fffc922fe11 in ?? () from 
/usr/lib/evolution/3.6/libecontacteditor.so.0
#4  0x7fffc922f0de in ?? () from 
/usr/lib/evolution/3.6/libecontacteditor.so.0
#5  0x747cbf57 in g_simple_async_result_complete () from 
/usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
#6  0x77036069 in ?? () from /usr/lib/libedataserver-1.2.so.17
#7  0x770388e4 in ?? () from /usr/lib/libedataserver-1.2.so.17
#8  0x747cbf57 in g_simple_async_result_complete () from 
/usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
#9  0x747cc059 in ?? () from /usr/lib/x86_64-linux-gnu/libgio-2.0.so.0
#10 0x7425eab5 in g_main_context_dispatch () from 
/lib/x86_64-linux-gnu/libglib-2.0.so.0
---Type  to continue, or q  to quit---
#11 0x7425ede8 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#12 0x7425f1e2 in g_main_loop_run () from 
/lib/x86_64-linux-gnu/libglib-2.0.so.0
#13 0x74c3f9b5 in gtk_main () from 
/usr/lib/x86_64-linux-gnu/libgtk-3.so.0
#14 0x73df in main ()

Happy to provide more information if necessary.

-Mark

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evolution in Ubuntu.
https://bugs.launchpad.net/bugs/996903

Title:
  Evolution crashes ater attempting to save changes to a contact

Status in “evolution” package in Ubuntu:
  Confirmed

Bug description:
  This happens regulary when trying to edit contact info.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: evolution 3.2.3-0ubuntu6
  ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14
  Uname: Linux 3.2.0-24-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.0.1-0ubuntu7
  Architecture: amd64
  CheckboxSubmission: 2beff986995e860c0bb7871ef4ba
  CheckboxSystem: 3d3208847d3d5f91226b98d85f564483
  Date: Wed May  9 00:39:35 2012
  ExecutablePath: /usr/bin/evolution
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: evolution
  UpgradeStatus: Upgraded to precise on 2012-04-28 (11 days ago)
  mtime.conffile..etc.xdg.autostart.evolution.alarm.notify.desktop: 
2012-04-27T22:55:00.287498

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/996903/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 926143] Re: chromium-browser crashed with SIGSEGV in magazine_chain_pop_head()

[Phill Whiteside]

https://bugs.launchpad.net/bugs/1086613

Title:
  Please update to 23.0.1271.97

Status in “chromium-browser” package in Ubuntu:
  Triaged
Status in “chromium-browser” source package in Lucid:
  In Progress
Status in “chromium-browser” source package in Oneiric:
  In Progress
Status in “chromium-browser” source package in Precise:
  In Progress
Status in “chromium-browser” source package in Quantal:
  In Progress

Bug description:
  This update will bring all stable releases up to date.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to chromium-browser in Ubuntu.
https://bugs.launchpad.net/bugs/926143

Title:
  chromium-browser crashed with SIGSEGV in magazine_chain_pop_head()

Status in “chromium-browser” package in Ubuntu:
  Confirmed
Status in “chromium-browser” package in Debian:
  New

Bug description:
  Was launching a blackboard page and this error came up

  ProblemType: Crash
  DistroRelease: Ubuntu 12.04
  Package: chromium-browser 16.0.912.77~r118311-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-12.21-generic 3.2.2
  Uname: Linux 3.2.0-12-generic x86_64
  NonfreeKernelModules: fglrx
  ApportVersion: 1.91-0ubuntu1
  Architecture: amd64
  Date: Fri Feb  3 15:37:49 2012
  Desktop-Session:
   DESKTOP_SESSION = ubuntu
   XDG_CONFIG_DIRS = /etc/xdg/xdg-ubuntu:/etc/xdg
   XDG_DATA_DIRS = 
/usr/share/ubuntu:/usr/share/gnome:/usr/local/share/:/usr/share/
  Env:
   MOZ_PLUGIN_PATH = None
   LD_LIBRARY_PATH = None
  ExecutablePath: /usr/lib/chromium-browser/chromium-browser
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
  ProcCmdline: /proc/self/exe --type=plugin 
--plugin-path=/usr/lib/jvm/java-6-openjdk-amd64/jre/lib/amd64/IcedTeaPlugin.so 
--lang=en-GB --channel=2597.0x7f05f6eeb900.1614060521
  ProcEnviron:
   LANGUAGE=en_GB:en
   PATH=(custom, no user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SegvAnalysis:
   Segfault happened at: 0x7fe6014a977a :mov
(%rbx),%rdx
   PC (0x7fe6014a977a) ok
   source "(%rbx)" (0x707474680056) not located in a known VMA region 
(needed readable region)!
   destination "%rdx" ok
  SegvReason: reading unknown VMA
  Signal: 11
  SourcePackage: chromium-browser
  StacktraceTop:
   g_slice_alloc () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   g_slice_alloc0 () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0
   g_object_freeze_notify () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0
  Title: chromium-browser crashed with SIGSEGV in g_slice_alloc()
  UpgradeStatus: Upgraded to precise on 2012-01-31 (3 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  chromium-default: CHROMIUM_FLAGS=""

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/926143/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1081702] Re: Update the default wallpaper in 13.04

[Aleve Sicofante]

My background is computer graphics. I've been on that industry for about
20 years.

There's no way wallpapers with so much gradients on a limited color
range that cover a big screen area at the same time will look good on
most screens today. Not only laptops use mainly 6-bit panels. There are
also many cheap desktop monitors that do the same.  Some dither
properly, others don't. But I even question that big screens using 8bit
per channel will properly show these gradients too. As a matter of fact,
this wallpaper might be used to test an 8bit monitor's quality... ;-)

Until we all have a 10bit per channel workflow (and that won't happen in
a long long time) the real solution is letting the artists know the
limitations of gradients -especially those on short color ranges using
big screen areas- and ask them for a different style of wallpapers. Non-
busy wallpapers doesn't mean "very simple gradients with tons of blur".
Of course, management at Canonical should be informed about this too,
just in case orders to use this wallpaper style come from above.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ubuntu-wallpapers in Ubuntu.
https://bugs.launchpad.net/bugs/1081702

Title:
  Update the default wallpaper in 13.04

Status in Ayatana Design:
  Fix Committed
Status in “ubuntu-wallpapers” package in Ubuntu:
  Fix Released

Bug description:
  We have got the 13.04 wallpaper ready ahead of schedule, so we might
  as well get it in the distro now ;-)

  See attached file "ubuntu_default_13_04.jpg"

  
  

  This change is part of a larger set of icon changes, the other bugs
  that are part of this same change request are:

  bug #1081704 (Dash - update the 'App Lens' icon asset in the Dash bottom lens 
nav bar)
  bug #1081702 (Update the default wallpaper in 13.04)
  bug #838854 (Workspaces, Launcher - The workspace Launcher icon should change 
depending on which workspace is currently being utilised)
  bug #1081697 (Launcher - Update BFB icon to use a new special asset)
  bug #1081687 (Launcher - Update Launcher tile assets)
  bug #1081691 (Launcher - Update the icons used for the Software Centre, 
Nautilus, and Software Updater)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ayatana-design/+bug/1081702/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1056669] Re: [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out, Front] No sound at all

[Raymond]

you need to follow up this case

http://mailman.alsa-project.org/pipermail/alsa-
devel/2012-December/057889.html

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1056669

Title:
  [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out,
  Front] No sound at all

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  How do I disable auto-mute?

  I'm a ubuntu noob.

  Speakers work fine, but plugging in headphones = no audio. Take it out
  and speakers work fine again.

  Checked alsamixer, saw that the head phone jack was "muted" (MM) and 0.
  If I make it (00), and up the volume, the headphones work.

  Unplug headphones and plug back in, and it's muted once again (MM).

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-10.10-generic 3.5.1
  Uname: Linux 3.5.0-10-generic x86_64
  ApportVersion: 2.4-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  skymd  2009 F pulseaudio
   /dev/snd/pcmC0D0c:   skymd  2009 F...m pulseaudio
  Date: Wed Sep 26 00:13:57 2012
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH successful
  Symptom_Card: Built-in Audio - HDA Intel PCH
  Symptom_Jack: Black Headphone Out, Front
  Symptom_PulsePlaybackTest: PulseAudio playback test successful
  Symptom_Type: No sound at all
  Title: [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out, 
Front] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/21/2012
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.19
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 1800
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 10.59
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.19:bd05/21/2012:svnHewlett-Packard:pnHPPaviliondv7NotebookPC:pvr06902120462620100:rvnHewlett-Packard:rn1800:rvr10.59:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion dv7 Notebook PC
  dmi.product.version: 06902120462620100
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1056669/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 843268] Re: gnome-control-center doesn't allow to specify proxy exceptions

[Mike Mestnik]

The bug is incomplete because there has been no testing if the change
implemented does either of these two things.

1. Does what the fix was intended to do.
2. Actually corrects the bug posted here.

Until there is some level of testing and user acceptance, the bug is not
fixed.  Because there is a lack of a better option Incomplete seems most
appropriate.


** Changed in: gnome-control-center (Ubuntu)
   Status: Fix Committed => Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/843268

Title:
  gnome-control-center doesn't allow to specify proxy exceptions

Status in GNOME Control Center:
  Fix Released
Status in “gnome-control-center” package in Ubuntu:
  Incomplete

Bug description:
  gnome-control-center from GNOME 3.0 now doesn't allow to specify the
  proxy ignore list. I have to set them with dconf-editor tool.

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: gnome-control-center 1:3.1.91-0ubuntu1
  ProcVersionSignature: Ubuntu 3.0.0-10.16-generic 3.0.4
  Uname: Linux 3.0.0-10-generic x86_64
  Architecture: amd64
  Date: Tue Sep  6 23:08:10 2011
  EcryptfsInUse: Yes
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Beta amd64 (20110901)
  SourcePackage: gnome-control-center
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-control-center/+bug/843268/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 946232] Re: [Meta-bug] Missing speaker and/or internal mic port

[Bryan White]

I have recently installed 12.04.1 on an Acer Aspire One AOA 110 ZG5
(upgraded to 16 GB ssd -- wee works like a real computer now). Alas, I
can't get the edit via #32 to do the trick. I event tried the deb file
hoping I did something dumb.

In every case alasamixer comes up with mike boost 0. I push it to 100
and do the alsamixer -k trick. I get very low sound level on the
internal mic. It only shows bars when I tap the case near the mike.
Testing with Skype I hear a very very quiet version of my test message.

I read above in 133 that a ZG5 worked -- but not mine so far.

Wish I had better news. Any suggestions gratefully received.

Bryan

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/946232

Title:
  [Meta-bug] Missing speaker and/or internal mic port

Status in “pulseaudio” package in Ubuntu:
  Fix Released
Status in “pulseaudio” source package in Precise:
  Fix Committed

Bug description:
   Read me first 

  If you're suffering from one of the following problems:

   1) In the sound settings dialog, when you plug your headphones into
  the designated 3.5 mm jack, there is a "Headphones" device correctly
  shown, but when you unplug it, there is no "Speaker" device shown,
  even though you have internal speakers on your computer.

   2) In the sound settings dialog, when you plug your external
  microphone into the designated 3.5 mm jack, there is a "Microphone"
  (or similar) device correctly shown, but when you unplug it, there is
  no "Internal Mic" device shown, even though you have an internal mic
  on your computer.

  If so, please try the workaround in comment #32. IF AND ONLY IF that
  is working for you, please attach alsa info (see
  https://wiki.ubuntu.com/Audio/AlsaInfo ) to this bug, together with
  the name of your machine (e g "Dell Latitude D620"). I'll try to
  include it in a list of devices that we have to manually enable and
  release it as an update to 12.04.

  Thanks! - and sorry for causing the bug in the first place :-/

  // David Henningsson

  

  The following machines are known to be affected (no more alsa-info
  needed) :

  # Acer AOA150
  # Acer Aspire 4810TZ
  # Acer Aspire 1810TZ
  # Packard bell dot m/a
  # Acer AOD260, AO532h
  # Dell MXC051
  # Dell Inspiron 6400 and E1505
  # Dell Latitude D620
  # Dell Latitude D820
  # Dell Latitude D520
  # Dell Latitude D420
  # Dell Inspiron 1525
  # Dell Inspiron 1011
  # Dell XPS 14 (L401X)
  # Dell XPS 15 (L501X)
  # Dell XPS 15 (L502X)
  # Asus 904HA (1000H)
  # Asus T101MT
  # Sony Vaio VGN-SR21M
  # Sony Vaio VPC-W115XG
  # Fujitsu Lifebook S7110
  # Fujitsu Lifebook A530
  # Toshiba A200
  # MSI X360
  # Lenovo 3000 Y410

  

   SRU Justification ===
  First, sorry if this bug is a bit messy, but I think it would be even more 
messy if I spread the information across several bugs. Here's some explanation:

  The long-term fix is already in Quantal, because we backported the
  "Phantom Jack" support into Ubuntu's 3.5 kernel. Together with that
  comes a small PulseAudio patch, http://bazaar.launchpad.net/~ubuntu-
  audio-dev/pulseaudio/ubuntu.precise/revision/519/debian/patches/0624
  -alsa-mixer-Add-Phantom-Jack-support.patch - the reason I want this in
  12.04 is to provide a better experience for users running the quantal
  kernel on precise, i e, the backport kernel coming with 12.04.2.

  In addition to that, while doing an SRU I could just as well add a few
  more quirks for affected machines showing up after the previous SRU,
  so that is now done in http://bazaar.launchpad.net/~ubuntu-audio-
  dev/pulseaudio/ubuntu.precise/revision/520/debian/patches/0625-alsa-
  mixer-Add-a-few-more-machines-to-internal-mic-w.patch

  [Impact]
  Several laptops (see above list) are missing mostly internal mics, but 
sometimes also speakers in the Sound Settings / PulseAudio. This leads to an 
inability to control volume for these devices, and often not being able to use 
them at all.

  [Test Case]
  * Have an affected machine
  * Notice that when your mic is unplugged, the "internal mic" is correctly 
shown in the sound settings

  [Regression Potential]
  The quirk-style fix only affects the machines above. The long-term fix 
affects only users of a newer (quantal or later) kernel.

  

  I have an DELL Inspiron 6400. As it seems ubuntu precise beta1 thinks it
  has a digital ouput. In the audio settings it says Play sound through:
  »Digital Output (S/PDIF)«

  As you can see there → 
http://support.dell.com/support/edocs/systems/ins6400/en/om/specs.htm#wp1054816
  it has no S/PDIF output.

  The audio Settings doesn't let me change the mode.
  Sometime the system sets the mode to »Digital Stereo (IEC958) Output« but
  the drop-down list menu is grayed out so I can't change it.

  If I plug in and out my headphones the system changes the mode to  »Analog 
Stereo Output«
  and I can hear 

[Desktop-packages] [Bug 926143] Re: chromium-browser crashed with SIGSEGV in magazine_chain_pop_head()

[Bug Watch Updater]

** Changed in: chromium-browser (Debian)
   Status: Unknown => New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to chromium-browser in Ubuntu.
https://bugs.launchpad.net/bugs/926143

Title:
  chromium-browser crashed with SIGSEGV in magazine_chain_pop_head()

Status in “chromium-browser” package in Ubuntu:
  Confirmed
Status in “chromium-browser” package in Debian:
  New

Bug description:
  Was launching a blackboard page and this error came up

  ProblemType: Crash
  DistroRelease: Ubuntu 12.04
  Package: chromium-browser 16.0.912.77~r118311-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-12.21-generic 3.2.2
  Uname: Linux 3.2.0-12-generic x86_64
  NonfreeKernelModules: fglrx
  ApportVersion: 1.91-0ubuntu1
  Architecture: amd64
  Date: Fri Feb  3 15:37:49 2012
  Desktop-Session:
   DESKTOP_SESSION = ubuntu
   XDG_CONFIG_DIRS = /etc/xdg/xdg-ubuntu:/etc/xdg
   XDG_DATA_DIRS = 
/usr/share/ubuntu:/usr/share/gnome:/usr/local/share/:/usr/share/
  Env:
   MOZ_PLUGIN_PATH = None
   LD_LIBRARY_PATH = None
  ExecutablePath: /usr/lib/chromium-browser/chromium-browser
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
  ProcCmdline: /proc/self/exe --type=plugin 
--plugin-path=/usr/lib/jvm/java-6-openjdk-amd64/jre/lib/amd64/IcedTeaPlugin.so 
--lang=en-GB --channel=2597.0x7f05f6eeb900.1614060521
  ProcEnviron:
   LANGUAGE=en_GB:en
   PATH=(custom, no user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SegvAnalysis:
   Segfault happened at: 0x7fe6014a977a :mov
(%rbx),%rdx
   PC (0x7fe6014a977a) ok
   source "(%rbx)" (0x707474680056) not located in a known VMA region 
(needed readable region)!
   destination "%rdx" ok
  SegvReason: reading unknown VMA
  Signal: 11
  SourcePackage: chromium-browser
  StacktraceTop:
   g_slice_alloc () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   g_slice_alloc0 () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0
   g_object_freeze_notify () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0
  Title: chromium-browser crashed with SIGSEGV in g_slice_alloc()
  UpgradeStatus: Upgraded to precise on 2012-01-31 (3 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  chromium-default: CHROMIUM_FLAGS=""

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/926143/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1058040] Re: fglrx-installer not working with AMD Radeon/Mobility Radeon HD 2000-4000 cards in Quantal

[SubOne]

Clean installed 12.10.
Tried installing latest driver from ATI website, rebooted to no unity and can't 
even switch to virtual terminals (they just show black screen).
Tried the workaround with the same results.
Let me know if I can provide more information.

ATI Radeon HD 2600XT

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to fglrx-installer in Ubuntu.
https://bugs.launchpad.net/bugs/1058040

Title:
  fglrx-installer not working with AMD Radeon/Mobility Radeon HD
  2000-4000 cards in Quantal

Status in Release Notes for Ubuntu:
  New
Status in “fglrx-installer” package in Ubuntu:
  Triaged

Bug description:
  Following the AMD decision to change to a new driver support model for 
Radeon™ HD 4000, HD 3000 and HD 2000 series cards for the legacy 12.6 driver as 
per 
http://support.amd.com/us/gpudownload/linux/legacy/Pages/legacy-radeon_linux.aspx
 , fglrx-installer installs non-working drivers for users of the cards:
  AMD Radeon HD 4000 Series
  AMD Radeon HD 3000 Series
  AMD Radeon HD 2000 Series
  AMD Radeon HD Series AGP
  AMD Mobility Radeon HD 4000 Series
  AMD Mobility Radeon HD 3000 Series
  AMD Mobility Radeon HD 2000 Series

  I suggest the addition of an fglrx-legacy package to install the AMD
  legacy drivers for users with older cards or patch the current code
  base for use with these cards.

  One of the outstanding issues for addressing this bug is AMD currently does 
not plan to support XServer 1.13 (for Ubuntu the package is xserver-xorg-core) 
for the legacy 12.6 driver, which Quantal uses:
   apt-cache policy xserver-xorg-core
  xserver-xorg-core:
    Installed: 2:1.13.0-0ubuntu6
    Candidate: 2:1.13.0-0ubuntu6
    Version table:
   *** 2:1.13.0-0ubuntu6 0
  500 http://archive.ubuntu.com/ubuntu/ quantal/main i386 Packages
  100 /var/lib/dpkg/status

  Output for fglrx 9.00 [1]:
  # lspci|grep VGA
  01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI 
RS780L [Radeon HD 3000]
  # modprobe fglrx
  FATAL: Error inserting fglrx 
(/lib/modules/3.5.0-15-generic/updates/dkms/fglrx.ko): No such device
  # dmesg|tail -n3
  [ 6785.693869] [fglrx] Maximum main memory to use for locked dma buffers: 
7132 MBytes.
  [ 6785.694089] [fglrx:firegl_init_device_list] *ERROR* No supported display 
adapters were found
  [ 6785.694091] [fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
  # dpkg --list|grep fglrx
  ii fglrx 2:9.000-0ubuntu1 amd64 Video driver for the AMD graphics accelerators
  ii fglrx-amdcccle 2:9.000-0ubuntu1 amd64 Catalyst Control Center for the AMD 
graphics accelerators

  [1] https://bugs.launchpad.net/ubuntu/+source/fglrx-installer-
  updates/+bug/1032672/comments/34

   WARNING !!!
  The following workaround has produced mixed results and left some users with 
temporarily broken systems. It is not recommended for production systems or 
novice users that are not comfortable with basic console/non-GUI recovery. USE 
AT OWN RISK.
  WORKAROUND: sudo add-apt-repository ppa:makson96/fglrx && sudo apt-get update 
&& sudo apt-get -y upgrade && sudo apt-get -y install fglrx-legacy

  This workaround will downgrade X to 1.12 and install the AMD legacy
  fglrx 8.97 (Catalyst 12.6).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-release-notes/+bug/1058040/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 418470] Re: USB Gamepad detected as mouse (Speedlink 360 style)

[mark bower]

The code in posts 26 and 34 worked for me on 12.04LTS.  However, is
there a way to make a script or launcher that could be selected when
needed off of the desktop to run:  "xinput set-prop 11 713 0" &  xinput
set-prop 11 714 0 (example as my numbers differ)

mark bower

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-input-evdev in Ubuntu.
https://bugs.launchpad.net/bugs/418470

Title:
  USB Gamepad detected as mouse (Speedlink 360 style)

Status in “xserver-xorg-input-evdev” package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: xserver-xorg-input-evdev

  Hi !

  My USB gamepad is controlling both the mouse pointer AND the joystick
  (in rrootage for instance) at the same time.

  To get it running at all I had to :

  - install xserver-xorg-input-joystick
  - copy acrux-usb-gamepad-8116.fdi to /etc/hal/fdi/policy (provided here : 
https://help.ubuntu.com/community/Joystick_lshal_outputs_done )
  - unplug and replug the joystick after the X server is loaded

  Those three steps are apparently mandatory otherwise nothing works.
  (the stick LED doesn't remain lit otherwise)

  Actually it raises several issues !
  1. the need for the the aforementioned steps
  2. the need to unplug / replug
  3. the fact that evdev seems to lock the controller and assign it as if it 
were a mouse

  Thanks a lot for reading this, 
  cheers !

  Attached : lshal output, where the gamepad does seem to be detected
  properly.

  Setup : Ubuntu 9.04, AMD64

  ProblemType: Bug
  Architecture: amd64
  DistroRelease: Ubuntu 9.04
  NonfreeKernelModules: nvidia
  Package: xserver-xorg-input-evdev 1:2.1.1-1ubuntu4
  ProcEnviron:
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  ProcVersion: Linux version 2.6.28-15-generic (buildd@yellow) (gcc version 
4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 19:25:34 UTC 2009
  SourcePackage: xserver-xorg-input-evdev
  Uname: Linux 2.6.28-15-generic x86_64

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-evdev/+bug/418470/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 969860] Re: fglrx uses 100% CPU when screen turns off (spinning in glXWaitVideoSyncSGI or glXSwapBuffers)

[MVNregress]

Oops.. Sorry, I mean.. disagree.

I experience High CPU usage in Gnome Remix, too

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to fglrx-installer in Ubuntu.
https://bugs.launchpad.net/bugs/969860

Title:
  fglrx uses 100% CPU when screen turns off (spinning in
  glXWaitVideoSyncSGI or glXSwapBuffers)

Status in Compiz:
  Invalid
Status in Compiz 0.9.8 series:
  Invalid
Status in Compiz Core:
  Invalid
Status in AMD fglrx video driver:
  Confirmed
Status in The Ubuntu Power Consumption Project:
  Fix Released
Status in “compiz” package in Ubuntu:
  Invalid
Status in “fglrx-installer” package in Ubuntu:
  Confirmed
Status in “fglrx-installer-updates” package in Ubuntu:
  Confirmed
Status in “gnome-shell” package in Ubuntu:
  Invalid

Bug description:
  WORKAROUND (1):
  1. Open Catalyst Control Center.
  2. Go to 3D > More Settings.
  3. Set "Wait for vertical refresh" to "On, unless application specifies".
  And if that doesn't work, then also do:
  4. Run "ccsm"
  5. In Workarounds, enable "Force full screen redraw (buffer swap) on repaint".

  WORKAROUND (2):
  1. Run ccsm (from package compizconfig-settings-manager)
  2. In OpenGL > Sync To VBlank = OFF

  TEST CASE:
  1. Monitor compiz CPU usage (from /proc//stat or top in batch 
mode)
  2. In "brightness and lock" settings set "Turn screen off when inactive" to 1 
minute
  3. Wait until screen turns off
  4. Move mouse or press a key to turn screen back on
  5. Check the CPU usage from the monitor

  ACTUAL RESULT:
  When screen turns off compiz goes to 100%
  When the screen turns back on, cpu usage drops immediately to a normal value
  The graph attached shows %CPU of compiz with a sample per second. The graph 
has been captured on a system with  a Radeon HD5770 and fglrx if that matter

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: compiz 1:0.9.7.2-0ubuntu4
  ProcVersionSignature: Ubuntu 3.2.0-21.34-generic 3.2.13
  Uname: Linux 3.2.0-21-generic x86_64
  NonfreeKernelModules: fglrx
  .tmp.unity.support.test.0:

  ApportVersion: 2.0-0ubuntu1
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  Date: Sat Mar 31 10:17:48 2012
  DistUpgraded: 2012-02-01 00:15:24,616 DEBUG enabling apt cron job
  DistroCodename: precise
  DistroVariant: ubuntu
  MachineType: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-21-generic 
root=UUID=cf89ba34-108b-404d-9804-32d54a1df2ea ro quiet splash vt.handoff=7
  SourcePackage: compiz
  UpgradeStatus: Upgraded to precise on 2012-01-31 (59 days ago)
  dmi.bios.date: 07/23/2010
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: FD
  dmi.board.name: GA-890GPA-UD3H
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrFD:bd07/23/2010:svnGigabyteTechnologyCo.,Ltd.:pnGA-890GPA-UD3H:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-890GPA-UD3H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: GA-890GPA-UD3H
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.
  version.compiz: compiz 1:0.9.7.2-0ubuntu4
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.32-1ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu8
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20111219.aacbd629-0ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20111201+b5534a1-1build2

To manage notifications about this bug go to:
https://bugs.launchpad.net/compiz/+bug/969860/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 969860] Re: fglrx uses 100% CPU when screen turns off (spinning in glXWaitVideoSyncSGI or glXSwapBuffers)

[MVNregress]

I agree with Kellen Hawley.

Gnome Remix couldn't solve this problem.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to fglrx-installer in Ubuntu.
https://bugs.launchpad.net/bugs/969860

Title:
  fglrx uses 100% CPU when screen turns off (spinning in
  glXWaitVideoSyncSGI or glXSwapBuffers)

Status in Compiz:
  Invalid
Status in Compiz 0.9.8 series:
  Invalid
Status in Compiz Core:
  Invalid
Status in AMD fglrx video driver:
  Confirmed
Status in The Ubuntu Power Consumption Project:
  Fix Released
Status in “compiz” package in Ubuntu:
  Invalid
Status in “fglrx-installer” package in Ubuntu:
  Confirmed
Status in “fglrx-installer-updates” package in Ubuntu:
  Confirmed
Status in “gnome-shell” package in Ubuntu:
  Invalid

Bug description:
  WORKAROUND (1):
  1. Open Catalyst Control Center.
  2. Go to 3D > More Settings.
  3. Set "Wait for vertical refresh" to "On, unless application specifies".
  And if that doesn't work, then also do:
  4. Run "ccsm"
  5. In Workarounds, enable "Force full screen redraw (buffer swap) on repaint".

  WORKAROUND (2):
  1. Run ccsm (from package compizconfig-settings-manager)
  2. In OpenGL > Sync To VBlank = OFF

  TEST CASE:
  1. Monitor compiz CPU usage (from /proc//stat or top in batch 
mode)
  2. In "brightness and lock" settings set "Turn screen off when inactive" to 1 
minute
  3. Wait until screen turns off
  4. Move mouse or press a key to turn screen back on
  5. Check the CPU usage from the monitor

  ACTUAL RESULT:
  When screen turns off compiz goes to 100%
  When the screen turns back on, cpu usage drops immediately to a normal value
  The graph attached shows %CPU of compiz with a sample per second. The graph 
has been captured on a system with  a Radeon HD5770 and fglrx if that matter

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: compiz 1:0.9.7.2-0ubuntu4
  ProcVersionSignature: Ubuntu 3.2.0-21.34-generic 3.2.13
  Uname: Linux 3.2.0-21-generic x86_64
  NonfreeKernelModules: fglrx
  .tmp.unity.support.test.0:

  ApportVersion: 2.0-0ubuntu1
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  Date: Sat Mar 31 10:17:48 2012
  DistUpgraded: 2012-02-01 00:15:24,616 DEBUG enabling apt cron job
  DistroCodename: precise
  DistroVariant: ubuntu
  MachineType: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-21-generic 
root=UUID=cf89ba34-108b-404d-9804-32d54a1df2ea ro quiet splash vt.handoff=7
  SourcePackage: compiz
  UpgradeStatus: Upgraded to precise on 2012-01-31 (59 days ago)
  dmi.bios.date: 07/23/2010
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: FD
  dmi.board.name: GA-890GPA-UD3H
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrFD:bd07/23/2010:svnGigabyteTechnologyCo.,Ltd.:pnGA-890GPA-UD3H:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-890GPA-UD3H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: GA-890GPA-UD3H
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.
  version.compiz: compiz 1:0.9.7.2-0ubuntu4
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.32-1ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu8
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.14.99~git20111219.aacbd629-0ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:0.0.16+git20111201+b5534a1-1build2

To manage notifications about this bug go to:
https://bugs.launchpad.net/compiz/+bug/969860/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 926143] Re: chromium-browser crashed with SIGSEGV in magazine_chain_pop_head()

[Chris Bainbridge]

Happens when trying to run netalyzr with icedtea-6 plugin
http://netalyzr.icsi.berkeley.edu/

** Bug watch added: Debian Bug tracker #606471
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=606471

** Also affects: chromium-browser (Debian) via
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=606471
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to chromium-browser in Ubuntu.
https://bugs.launchpad.net/bugs/926143

Title:
  chromium-browser crashed with SIGSEGV in magazine_chain_pop_head()

Status in “chromium-browser” package in Ubuntu:
  Confirmed
Status in “chromium-browser” package in Debian:
  Unknown

Bug description:
  Was launching a blackboard page and this error came up

  ProblemType: Crash
  DistroRelease: Ubuntu 12.04
  Package: chromium-browser 16.0.912.77~r118311-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-12.21-generic 3.2.2
  Uname: Linux 3.2.0-12-generic x86_64
  NonfreeKernelModules: fglrx
  ApportVersion: 1.91-0ubuntu1
  Architecture: amd64
  Date: Fri Feb  3 15:37:49 2012
  Desktop-Session:
   DESKTOP_SESSION = ubuntu
   XDG_CONFIG_DIRS = /etc/xdg/xdg-ubuntu:/etc/xdg
   XDG_DATA_DIRS = 
/usr/share/ubuntu:/usr/share/gnome:/usr/local/share/:/usr/share/
  Env:
   MOZ_PLUGIN_PATH = None
   LD_LIBRARY_PATH = None
  ExecutablePath: /usr/lib/chromium-browser/chromium-browser
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
  ProcCmdline: /proc/self/exe --type=plugin 
--plugin-path=/usr/lib/jvm/java-6-openjdk-amd64/jre/lib/amd64/IcedTeaPlugin.so 
--lang=en-GB --channel=2597.0x7f05f6eeb900.1614060521
  ProcEnviron:
   LANGUAGE=en_GB:en
   PATH=(custom, no user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SegvAnalysis:
   Segfault happened at: 0x7fe6014a977a :mov
(%rbx),%rdx
   PC (0x7fe6014a977a) ok
   source "(%rbx)" (0x707474680056) not located in a known VMA region 
(needed readable region)!
   destination "%rdx" ok
  SegvReason: reading unknown VMA
  Signal: 11
  SourcePackage: chromium-browser
  StacktraceTop:
   g_slice_alloc () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   g_slice_alloc0 () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0
   g_object_freeze_notify () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0
  Title: chromium-browser crashed with SIGSEGV in g_slice_alloc()
  UpgradeStatus: Upgraded to precise on 2012-01-31 (3 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  chromium-default: CHROMIUM_FLAGS=""

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/926143/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 975308] Re: Déjà Dup fails to connect to Box.com WebDAV

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gvfs (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/975308

Title:
  Déjà Dup fails to connect to Box.com WebDAV

Status in “gvfs” package in Ubuntu:
  Confirmed

Bug description:
  Hi. I'm using Ubuntu 11.10 and since today deja-dup is failing to
  connect to my Box.com deja-dup account. I've tried connecting with
  Nautilus too. Here are the errors they're returning:

  Nautilus (both HTTP and HTTPS): HTTP Error: Found.
  deja-dup (HTTP): HTTP Error: Found
  deja-dup (HTTPS): Not a WebDAV-enabled share

  Weirdly, Chrome connects just fine. I think this started today, as
  before I couldn't back up due to another error I wanted to debug
  today. With that other error, my backup would at least start.

  deja-dup  20.1-0ubuntu0.2
  duplicity 0.6.15-0ubuntu2

  tom@laptop:~$ cat /tmp/deja-dup2.gsettings
  org.gnome.DejaDup backend 'file'
  org.gnome.DejaDup delete-after 0
  org.gnome.DejaDup exclude-list ['$TRASH', '$DOWNLOAD', '/home/tom/Dropbox']
  org.gnome.DejaDup include-list ['$HOME']
  org.gnome.DejaDup last-backup '2012-03-29T19:34:12.754221Z'
  org.gnome.DejaDup last-restore '2011-11-16T19:15:56.103487Z'
  org.gnome.DejaDup last-run '2012-03-29T19:34:12.754221Z'
  org.gnome.DejaDup periodic true
  org.gnome.DejaDup periodic-period 28
  org.gnome.DejaDup prompt-check '2011-11-14T20:25:14.548969Z'
  org.gnome.DejaDup root-prompt true
  org.gnome.DejaDup welcomed false
  org.gnome.DejaDup.File icon '. GThemedIcon drive-harddisk-usb drive-harddisk 
drive'
  org.gnome.DejaDup.File name '120 GB Hard Disk: Backup'
  org.gnome.DejaDup.File path 'davs://me%40tomslominski@www.box.com/dav'
  org.gnome.DejaDup.File relpath b''
  org.gnome.DejaDup.File short-name 'Backup'
  org.gnome.DejaDup.File type 'normal'
  org.gnome.DejaDup.File uuid '9be11a3b-46a3-4f58-a4f4-0c0a33a80cad'
  org.gnome.DejaDup.Rackspace container 'tom'
  org.gnome.DejaDup.Rackspace username ''
  org.gnome.DejaDup.S3 bucket ''
  org.gnome.DejaDup.S3 folder 'tom'
  org.gnome.DejaDup.S3 id ''
  org.gnome.DejaDup.U1 folder '/deja-dup/tom'

  tom@laptop:~$ DEJA_DUP_DEBUG=1 deja-dup --backup | tail -n 1000 > /tmp
  /deja-dup.log

  (deja-dup:16124): LIBDBUSMENU-GLIB-WARNING **: About to Show called on
  an item wihtout submenus.  We're ignoring it.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/975308/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1078226] Re: raring daily: background & lightdm look as if they are in 8bit greyscale mode

[Phill Whiteside]

reference #8 
No, it is a ubuntu Raring Vs KVM issue, not the other way round :) KVM is part 
of the kernel, it is also part of cloud, guestfish which is a tool for KVM also 
will not run under quantal (there is new stuff being applied for raring). 
Raring KVM cannot run  'raring' without the video issue. KVM something is 
very broken in raring, not the other way round. 
I'm NOT 100% sure if 
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1088692 is a true 
duplicate of this bug, as there is no section that has stated the reason for it 
to fail.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1078226

Title:
  raring daily: background & lightdm look as if they are in 8bit
  greyscale mode

Status in “nautilus” package in Ubuntu:
  Incomplete
Status in “ubiquity” package in Ubuntu:
  Confirmed
Status in “xorg” package in Ubuntu:
  Invalid

Bug description:
  I am using virt-manager / KVM.

  The wallpaper is grey square boxes, instead of orange&purple mish-
  mash.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: compiz 1:0.9.8.4+bzr3412-0ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.2-0ubuntu3
  Architecture: amd64
  CasperVersion: 1.328
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CurrentDmesg:
   [   19.517347] snd_hda_intel :00:04.0: >setting latency timer to 64
   [   20.637021] init: udev-fallback-graphics main process (2141) terminated 
with status 1
   [   28.600013] hda-intel: Invalid position buffer, using LPIB read method 
instead.
  Date: Tue Nov 13 09:51:16 2012
  DistUpgraded: Fresh install
  DistroCodename: raring
  DistroVariant: ubuntu
  GraphicsCard:
   Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller])
     Subsystem: Red Hat, Inc Device [1af4:1100]
  LiveMediaBuild: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20121113)
  Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Bochs Bochs
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper 
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  SourcePackage: compiz
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 01/01/2007
  dmi.bios.vendor: Bochs
  dmi.bios.version: Bochs
  dmi.chassis.type: 1
  dmi.chassis.vendor: Bochs
  dmi.modalias: 
dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr:
  dmi.product.name: Bochs
  dmi.sys.vendor: Bochs
  version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.39-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.2-0ubuntu3
  xserver.bootTime: Tue Nov 13 09:44:11 2012
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputAT Translated Set 2 keyboard KEYBOARD, id 7
   inputImExPS/2 Generic Explorer Mouse MOUSE, id 8
  xserver.errors:
   open /dev/dri/card0: No such file or directory
   open /dev/fb0: No such file or directory
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:

  xserver.version: 2:1.13.0-0ubuntu6

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1078226/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 737615] Re: Can't save changes in "Edit Connections..." for Wi-Fi networks to which one doesn't have the password

[Syed Hashmi]

Same thing was happening on my suse, i deleted the connection ad
recreated it. the save button wasn't grayed out after that. lemmi know
if it works.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/737615

Title:
  Can't save changes in "Edit Connections..." for Wi-Fi networks to
  which one doesn't have the password

Status in “network-manager” package in Ubuntu:
  Triaged

Bug description:
  Binary package hint: network-manager

  Steps to reproduce:
  1) Right-click on Network Manager's tray icon
  2) select "edit connections"
  3) go to the "wireless" tab
  4) select any connection in the list, except the one you are currently 
connected to
  5) Click "Edit"
  5) Change some settings

  Expected: there should be some way to save those changes

  Observed: the "Apply" button is greyed out. There is no "Save" button.
  If you hit Cancel, obviously the changes are discarded.

  If you edit the network you are connected to, the Apply button works,
  but why on earth are'n you allowed to save changes to a network you
  are not connected to? And if there was a reason why you can't, then
  why are you allowed to edit in the first place?

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: network-manager 0.8-0ubuntu3
  ProcVersionSignature: Ubuntu 2.6.32-29.58-generic 2.6.32.28+drm33.13
  Uname: Linux 2.6.32-29-generic i686
  NonfreeKernelModules: nvidia
  Architecture: i386
  CRDA: Error: [Errno 2] No such file or directory
  Date: Fri Mar 18 14:47:06 2011
  IfupdownConfig:
   auto lo
   iface lo inet loopback
  InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429)
  IpRoute:
   192.168.2.0/24 dev wlan0  proto kernel  scope link  src 192.168.2.105  
metric 2 
   169.254.0.0/16 dev wlan0  scope link  metric 1000 
   default via 192.168.2.1 dev wlan0  proto static
  Keyfiles: Error: [Errno 2] No such file or directory
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: network-manager

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/737615/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1078226] Re: raring daily: background & lightdm look as if they are in 8bit greyscale mode

[Phill Whiteside]

Video corruption also appears when installing raring onto a CentOS 6.3
KVM system.

** Attachment added: "2012-12-14-003352_1600x900_scrot.png"
   
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1078226/+attachment/3459506/+files/2012-12-14-003352_1600x900_scrot.png

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1078226

Title:
  raring daily: background & lightdm look as if they are in 8bit
  greyscale mode

Status in “nautilus” package in Ubuntu:
  Incomplete
Status in “ubiquity” package in Ubuntu:
  Confirmed
Status in “xorg” package in Ubuntu:
  Invalid

Bug description:
  I am using virt-manager / KVM.

  The wallpaper is grey square boxes, instead of orange&purple mish-
  mash.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: compiz 1:0.9.8.4+bzr3412-0ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.2-0ubuntu3
  Architecture: amd64
  CasperVersion: 1.328
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CurrentDmesg:
   [   19.517347] snd_hda_intel :00:04.0: >setting latency timer to 64
   [   20.637021] init: udev-fallback-graphics main process (2141) terminated 
with status 1
   [   28.600013] hda-intel: Invalid position buffer, using LPIB read method 
instead.
  Date: Tue Nov 13 09:51:16 2012
  DistUpgraded: Fresh install
  DistroCodename: raring
  DistroVariant: ubuntu
  GraphicsCard:
   Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller])
     Subsystem: Red Hat, Inc Device [1af4:1100]
  LiveMediaBuild: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20121113)
  Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Bochs Bochs
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper 
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  SourcePackage: compiz
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 01/01/2007
  dmi.bios.vendor: Bochs
  dmi.bios.version: Bochs
  dmi.chassis.type: 1
  dmi.chassis.vendor: Bochs
  dmi.modalias: 
dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr:
  dmi.product.name: Bochs
  dmi.sys.vendor: Bochs
  version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.39-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.2-0ubuntu3
  xserver.bootTime: Tue Nov 13 09:44:11 2012
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputAT Translated Set 2 keyboard KEYBOARD, id 7
   inputImExPS/2 Generic Explorer Mouse MOUSE, id 8
  xserver.errors:
   open /dev/dri/card0: No such file or directory
   open /dev/fb0: No such file or directory
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:

  xserver.version: 2:1.13.0-0ubuntu6

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1078226/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1049988] Re: Inconsistent presentation of screenshots and video, both should be in the same frame

[Adolfo Jayme Barrientos]

** Changed in: software-center (Ubuntu)
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/1049988

Title:
  Inconsistent presentation of screenshots and video, both should be in
  the same frame

Status in “software-center” package in Ubuntu:
  Confirmed

Bug description:
  If you open a "package page" with embedded video in USC, you'll notice video 
looks like it doesn't fit there. Just under the player there is a white frame 
and it looks different to embedded images.
  I propose this should look the same as embedded image, so it should have the 
same border around it.
  

  #SCREENSHOTS
  If you open a "package page" on the web, you will be able to browse all 
available images of the application. On the other hand, USC is limited only to 
3 images. There should be at least arrows on the left and right sides of the 
preview bar so user would be able to browse all images.

  #Links
  I also think email and web links should be different. Now there is no 
difference between them (email is labeled as "Developer Web Site").

  + Software available for free (even though it is a proprietary thing)
  should always be available for download through standard "Download"
  button instead of "Buy" button. (You don't buy free things).

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: software-center 5.2.5
  ProcVersionSignature: Ubuntu 3.2.0-30.48-generic 3.2.27
  Uname: Linux 3.2.0-30-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.0.1-0ubuntu13
  Architecture: amd64
  Date: Wed Sep 12 19:37:30 2012
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=cs_CZ.UTF-8
   SHELL=/bin/bash
  SourcePackage: software-center
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1049988/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 688830] Re: Select quicklist items with just one right click

[Adolfo Jayme Barrientos]

** Changed in: unity-2d
   Status: Confirmed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity in Ubuntu.
Matching subscriptions: dp-unity, dp-unity2d
https://bugs.launchpad.net/bugs/688830

Title:
  Select quicklist items with just one right click

Status in Nux:
  Fix Released
Status in Unity:
  Fix Released
Status in Unity 2D:
  Fix Released
Status in “nux” package in Ubuntu:
  Fix Released
Status in “unity” package in Ubuntu:
  Fix Released
Status in “unity-2d” package in Ubuntu:
  Fix Released

Bug description:
  Binary package hint: unity

  I'm used from gnome right-click menus to being able to right click,
  move the mouse and release the right button over an item to select it.
  Unity's quicklist, however, don't let you do this: you have to right-
  click the launcher AND then click the quicklist item again, which is
  not consistent.

To manage notifications about this bug go to:
https://bugs.launchpad.net/nux/+bug/688830/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1078226] Re: raring daily: background & lightdm look as if they are in 8bit greyscale mode

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: ubiquity (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1078226

Title:
  raring daily: background & lightdm look as if they are in 8bit
  greyscale mode

Status in “nautilus” package in Ubuntu:
  Incomplete
Status in “ubiquity” package in Ubuntu:
  Confirmed
Status in “xorg” package in Ubuntu:
  Invalid

Bug description:
  I am using virt-manager / KVM.

  The wallpaper is grey square boxes, instead of orange&purple mish-
  mash.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: compiz 1:0.9.8.4+bzr3412-0ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.2-0ubuntu3
  Architecture: amd64
  CasperVersion: 1.328
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CurrentDmesg:
   [   19.517347] snd_hda_intel :00:04.0: >setting latency timer to 64
   [   20.637021] init: udev-fallback-graphics main process (2141) terminated 
with status 1
   [   28.600013] hda-intel: Invalid position buffer, using LPIB read method 
instead.
  Date: Tue Nov 13 09:51:16 2012
  DistUpgraded: Fresh install
  DistroCodename: raring
  DistroVariant: ubuntu
  GraphicsCard:
   Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller])
     Subsystem: Red Hat, Inc Device [1af4:1100]
  LiveMediaBuild: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20121113)
  Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Bochs Bochs
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper 
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  SourcePackage: compiz
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 01/01/2007
  dmi.bios.vendor: Bochs
  dmi.bios.version: Bochs
  dmi.chassis.type: 1
  dmi.chassis.vendor: Bochs
  dmi.modalias: 
dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr:
  dmi.product.name: Bochs
  dmi.sys.vendor: Bochs
  version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.39-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.2-0ubuntu3
  xserver.bootTime: Tue Nov 13 09:44:11 2012
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputAT Translated Set 2 keyboard KEYBOARD, id 7
   inputImExPS/2 Generic Explorer Mouse MOUSE, id 8
  xserver.errors:
   open /dev/dri/card0: No such file or directory
   open /dev/fb0: No such file or directory
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:

  xserver.version: 2:1.13.0-0ubuntu6

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1078226/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 903833] Re: Support dark variation of the theme

[Adolfo Jayme Barrientos]

** Package changed: metacity (Ubuntu) => compiz (Ubuntu)

** Changed in: compiz (Ubuntu)
   Importance: Undecided => Low

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to metacity in Ubuntu.
https://bugs.launchpad.net/bugs/903833

Title:
  Support dark variation of the theme

Status in Ayatana Design:
  Opinion
Status in Light Themes:
  Triaged
Status in “compiz” package in Ubuntu:
  Confirmed

Bug description:
  We should support Gtk+3 dark variation of the theme, by providing one

To manage notifications about this bug go to:
https://bugs.launchpad.net/ayatana-design/+bug/903833/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1078226] Re: raring daily: background & lightdm look as if they are in 8bit greyscale mode

[Dmitrijs Ledkovs]

** Package changed: ubuntu => ubiquity (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1078226

Title:
  raring daily: background & lightdm look as if they are in 8bit
  greyscale mode

Status in “nautilus” package in Ubuntu:
  Incomplete
Status in “ubiquity” package in Ubuntu:
  Confirmed
Status in “xorg” package in Ubuntu:
  Invalid

Bug description:
  I am using virt-manager / KVM.

  The wallpaper is grey square boxes, instead of orange&purple mish-
  mash.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: compiz 1:0.9.8.4+bzr3412-0ubuntu1
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic x86_64
  ApportVersion: 2.6.2-0ubuntu3
  Architecture: amd64
  CasperVersion: 1.328
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CurrentDmesg:
   [   19.517347] snd_hda_intel :00:04.0: >setting latency timer to 64
   [   20.637021] init: udev-fallback-graphics main process (2141) terminated 
with status 1
   [   28.600013] hda-intel: Invalid position buffer, using LPIB read method 
instead.
  Date: Tue Nov 13 09:51:16 2012
  DistUpgraded: Fresh install
  DistroCodename: raring
  DistroVariant: ubuntu
  GraphicsCard:
   Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller])
     Subsystem: Red Hat, Inc Device [1af4:1100]
  LiveMediaBuild: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20121113)
  Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: Bochs Bochs
  MarkForUpload: True
  PackageArchitecture: all
  ProcEnviron:
   TERM=linux
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper 
initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
  SourcePackage: compiz
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 01/01/2007
  dmi.bios.vendor: Bochs
  dmi.bios.version: Bochs
  dmi.chassis.type: 1
  dmi.chassis.vendor: Bochs
  dmi.modalias: 
dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr:
  dmi.product.name: Bochs
  dmi.sys.vendor: Bochs
  version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.39-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.2-0ubuntu3
  xserver.bootTime: Tue Nov 13 09:44:11 2012
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputAT Translated Set 2 keyboard KEYBOARD, id 7
   inputImExPS/2 Generic Explorer Mouse MOUSE, id 8
  xserver.errors:
   open /dev/dri/card0: No such file or directory
   open /dev/fb0: No such file or directory
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:

  xserver.version: 2:1.13.0-0ubuntu6

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1078226/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 566658] Re: libslab_get_gconf_value: error getting /desktop/gnome/applications/main-menu/lock-down/user_modifiable_apps

[Bug Watch Updater]

** Changed in: gnome-control-center
   Status: New => Won't Fix

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/566658

Title:
  libslab_get_gconf_value: error getting /desktop/gnome/applications
  /main-menu/lock-down/user_modifiable_apps

Status in GNOME Control Center:
  Won't Fix
Status in “gnome-control-center” package in Ubuntu:
  Invalid

Bug description:
  Binary package hint: gnome-control-center

  Lucid updated

  got numerous errors into .xsession and from console:

  libslab_get_gconf_value: error getting /desktop/gnome/applications
  /main-menu/lock-down/user_modifiable_apps

   Murrine configuration option "gradients" is no longer supported
  Murrine configuration option "profile" is no longer supported

  how to reproduce: select a theme and using tabs , choose your border &
  color look then validate this custom theme.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-control-center 1:2.30.0-0ubuntu4
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic-pae 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic-pae i686
  NonfreeKernelModules: nvidia
  Architecture: i386
  Date: Mon Apr 19 15:44:24 2010
  ProcEnviron:
   LANG=fr_FR.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-control-center

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-control-center/+bug/566658/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 635640] Re: [Maverick] Rename "Additional drivers" to "Hardware drivers"

[Adolfo Jayme Barrientos]

This bug is obsolete, even jockey has been deprecated.

** Changed in: jockey (Ubuntu)
   Status: Confirmed => Won't Fix

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to jockey in Ubuntu.
https://bugs.launchpad.net/bugs/635640

Title:
  [Maverick]  Rename "Additional drivers" to "Hardware drivers"

Status in “jockey” package in Ubuntu:
  Won't Fix

Bug description:
  The menu item change from "Hardware drivers" to "Additional drivers"
  causes severe end-user confusion.

  Menu System > Administration > Hardware drivers is well-established
  within Wikis, Forums and blogs.

  Just sad that this was changed without any deeper discussion within
  this bug.

  https://bugs.launchpad.net/ubuntu/+source/jockey/+bug/409338

  So change this again, please !

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/jockey/+bug/635640/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1089671] Re: Slow detecting full CD-RW in ISO Burning

[Kangarooo]

** Changed in: brasero (Ubuntu)
   Status: Incomplete => New

** Description changed:

  Slow detecting CD in ISO Burning
  Its taking really long time if CD-RW is full
+ 
+ Put in cd-rw witch is already with data written. Open Brasero press Burn
+ iso. And see very long is taking to see CD.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: brasero 2.30.0-0ubuntu1
  ProcVersionSignature: Ubuntu 2.6.32-45.100-generic 2.6.32.60+drm33.26
  Uname: Linux 2.6.32-45-generic i686
  Architecture: i386
  Date: Thu Dec 13 00:36:06 2012
  InstallationMedia: Ubuntu-Netbook 10.04 "Lucid Lynx" - Release i386 
(20100429.4)
  ProcEnviron:
-  LANG=en_US.utf8
-  SHELL=/bin/bash
+  LANG=en_US.utf8
+  SHELL=/bin/bash
  SourcePackage: brasero

** Description changed:

  Slow detecting CD in ISO Burning
  Its taking really long time if CD-RW is full
  
- Put in cd-rw witch is already with data written. Open Brasero press Burn
- iso. And see very long is taking to see CD.
+ Put in cd-rw witch is already with data written. Open Brasero press Burn iso. 
And see very long is taking to see CD.
+ Instead of course it should be faster then in Windows to beat bug 1
  
  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: brasero 2.30.0-0ubuntu1
  ProcVersionSignature: Ubuntu 2.6.32-45.100-generic 2.6.32.60+drm33.26
  Uname: Linux 2.6.32-45-generic i686
  Architecture: i386
  Date: Thu Dec 13 00:36:06 2012
  InstallationMedia: Ubuntu-Netbook 10.04 "Lucid Lynx" - Release i386 
(20100429.4)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: brasero

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to brasero in Ubuntu.
https://bugs.launchpad.net/bugs/1089671

Title:
  Slow detecting full CD-RW in ISO Burning

Status in “brasero” package in Ubuntu:
  New

Bug description:
  Slow detecting CD in ISO Burning
  Its taking really long time if CD-RW is full

  Put in cd-rw witch is already with data written. Open Brasero press Burn iso. 
And see very long is taking to see CD.
  Instead of course it should be faster then in Windows to beat bug 1

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: brasero 2.30.0-0ubuntu1
  ProcVersionSignature: Ubuntu 2.6.32-45.100-generic 2.6.32.60+drm33.26
  Uname: Linux 2.6.32-45-generic i686
  Architecture: i386
  Date: Thu Dec 13 00:36:06 2012
  InstallationMedia: Ubuntu-Netbook 10.04 "Lucid Lynx" - Release i386 
(20100429.4)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: brasero

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/brasero/+bug/1089671/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

Re: [Desktop-packages] [Bug 1038479] Re: [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a while

[Carl Johnson]

Can't answer you question.




 From: Raymond <1038...@bugs.launchpad.net>
To: cfj...@yahoo.com 
Sent: Thursday, December 13, 2012 9:42 AM
Subject: [Bug 1038479] Re: [Satellite L755, Conexant CX20585, Speaker, 
Internal] fails after a while
 
did the pin ctl of the speaker node change from OUT to 0x00 ?

did the system log (dmesg) contain any suspend and resume message ?

-- 
You received this bug notification because you are subscribed to the bug
report.
https://bugs.launchpad.net/bugs/1038479

Title:
  [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a
  while

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  Restart will fix the issue, but sound always quits from internal
  speaker. Headphones work always.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24
  Uname: Linux 3.2.0-29-generic x86_64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu12
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog]
     Subdevices: 1/1
     Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  bernie     1838 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 44'
     Mixer name    : 'Intel CougarPoint HDMI'
     Components    : 'HDA:14f15069,1179fc50,00100302 
HDA:80862805,1179fc50,0010'
     Controls      : 24
     Simple ctrls  : 11
  Date: Sat Aug 18 11:18:34 2012
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_US:en
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_Card: Built-in Audio - HDA Intel PCH
  Symptom_Jack: Speaker, Internal
  Symptom_Type: Sound works for a while, then breaks
  Title: [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a 
while
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/13/2011
  dmi.bios.vendor: INSYDE
  dmi.bios.version: 2.20
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Base Board Product Name
  dmi.board.vendor: Intel Corp.
  dmi.board.version: Base Board Version
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: OEM Chassis Manufacturer
  dmi.chassis.version: OEM Chassis Version
  dmi.modalias: 
dmi:bvnINSYDE:bvr2.20:bd07/13/2011:svnTOSHIBA:pnSatelliteL755:pvrPSK1WU-05N004:rvnIntelCorp.:rnBaseBoardProductName:rvrBaseBoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
  dmi.product.name: Satellite L755
  dmi.product.version: PSK1WU-05N004
  dmi.sys.vendor: TOSHIBA

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1038479/+subscriptions

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1038479

Title:
  [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a
  while

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  Restart will fix the issue, but sound always quits from internal
  speaker. Headphones work always.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24
  Uname: Linux 3.2.0-29-generic x86_64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu12
  Architecture: amd64
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  bernie 1838 F pulseaudio
  Card0.Amixer.info:
   Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 44'
 Mixer name : 'Intel CougarPoint HDMI'
 Components : 'HDA:14f15069,1179fc50,00100302 
HDA:80862805,1179fc50,0010'
 Controls  : 24
 Simple ctrls  : 11
  Date: Sat Aug 18 11:18:34 2012
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 
(20120425)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_US:en
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_Card: Built-in Audio - HDA Intel PCH
  Symptom_Jack: Speaker, Internal
  Symptom_Type: Sound works for a while, then breaks
  Title: [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a 
while
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/13/2011
  dmi.bios.vendor: INS

[Desktop-packages] [Bug 1090181] [NEW] No internet connection although wireless connection is well established Need help As I did this showed me firmwarebug as below

[Yasser Ahmed Maamoun]

Public bug reported:

I use ubunto 12.10 
No internet connection although wireless connection is well established Need 
help As I did this showed me firmwarebug as below
 sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill list; dmesg | grep 
-i firm
[sudo] password for Name:
  *-network
   description: Wireless interface
   product: AR9285 Wireless Network Adapter (PCI-Express)
   vendor: Atheros Communications Inc.
   physical id: 0
   bus info: pci@:04:00.0
   logical name: wlan0
   version: 01
   serial: 4c:0f:6e:17:9c:b9
   width: 64 bits
   clock: 33MHz
   capabilities: pm msi pciexpress bus_master cap_list ethernet physical 
wireless
   configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic 
firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
   resources: irq:17 memory:f090-f090
  *-network
   description: Ethernet interface
   product: RTL8111/8168B PCI Express Gigabit Ethernet controller
   vendor: Realtek Semiconductor Co., Ltd.
   physical id: 0
   bus info: pci@:08:00.0
   logical name: eth0
   version: 06
   serial: 8c:73:6e:a3:82:e9
   size: 10Mbit/s
   capacity: 1Gbit/s
   width: 64 bits
   clock: 33MHz
   capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet 
physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
   configuration: autonegotiation=on broadcast=yes driver=r8169 
driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 
link=no multicast=yes port=MII speed=10Mbit/s
   resources: irq:42 ioport:6000(size=256) memory:f0604000-f0604fff 
memory:f060-f0603fff
No LSB modules are available.
Distributor ID: Ubuntu
Description:vtx - A custom distribution made by vertex team
Release:12.04
Codename:   precise
Linux Name-LIFEBOOK-AH530 3.5.0-19-generic #30-Ubuntu SMP Tue Nov 13 17:49:53 
UTC 2012 i686 i686 i686 GNU/Linux
0: hci0: Bluetooth
 Soft blocked: no
 Hard blocked: no
1: phy0: Wireless LAN
 Soft blocked: no
 Hard blocked: no
[ 0.221924] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.339897] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial 
brightness
[ 6.368041] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial 
brightness

** Affects: gnome-nettool (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-nettool in Ubuntu.
https://bugs.launchpad.net/bugs/1090181

Title:
  No internet connection although wireless connection is well
  established Need help As I did this showed me firmwarebug as below

Status in “gnome-nettool” package in Ubuntu:
  New

Bug description:
  I use ubunto 12.10 
  No internet connection although wireless connection is well established Need 
help As I did this showed me firmwarebug as below
   sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill list; dmesg | 
grep -i firm
  [sudo] password for Name:
*-network
 description: Wireless interface
 product: AR9285 Wireless Network Adapter (PCI-Express)
 vendor: Atheros Communications Inc.
 physical id: 0
 bus info: pci@:04:00.0
 logical name: wlan0
 version: 01
 serial: 4c:0f:6e:17:9c:b9
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress bus_master cap_list ethernet physical 
wireless
 configuration: broadcast=yes driver=ath9k 
driverversion=3.5.0-19-generic firmware=N/A latency=0 link=no multicast=yes 
wireless=IEEE 802.11bgn
 resources: irq:17 memory:f090-f090
*-network
 description: Ethernet interface
 product: RTL8111/8168B PCI Express Gigabit Ethernet controller
 vendor: Realtek Semiconductor Co., Ltd.
 physical id: 0
 bus info: pci@:08:00.0
 logical name: eth0
 version: 06
 serial: 8c:73:6e:a3:82:e9
 size: 10Mbit/s
 capacity: 1Gbit/s
 width: 64 bits
 clock: 33MHz
 capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet 
physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
 configuration: autonegotiation=on broadcast=yes driver=r8169 
driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 
link=no multicast=yes port=MII speed=10Mbit/s
 resources: irq:42 ioport:6000(size=256) memory:f0604000-f0604fff 
memory:f060-f0603fff
  No LSB modules are available.
  Distributor ID:   Ubuntu
  Description:  vtx - A custom distribution made by vertex team
  Release:  12.04
  Codename: precise
  Linux Name-LIFEBOOK-AH530 3.5.0-19-generic #30-Ubuntu SMP Tue Nov 13 17:49:53 
UTC 2012 i686 i686 i686 GNU/Linux
  0: hci0: Bluetooth
   Soft blocked: no
   Hard blocked: no
  1: phy0: Wireless LA

[Desktop-packages] [Bug 1056669] Re: [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out, Front] No sound at all

[Nicolas Maître]

** Attachment added: "alsa-info.txt.lYaCjHLUA1"
   
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1056669/+attachment/3459484/+files/alsa-info.txt.lYaCjHLUA1

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1056669

Title:
  [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out,
  Front] No sound at all

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  How do I disable auto-mute?

  I'm a ubuntu noob.

  Speakers work fine, but plugging in headphones = no audio. Take it out
  and speakers work fine again.

  Checked alsamixer, saw that the head phone jack was "muted" (MM) and 0.
  If I make it (00), and up the volume, the headphones work.

  Unplug headphones and plug back in, and it's muted once again (MM).

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-10.10-generic 3.5.1
  Uname: Linux 3.5.0-10-generic x86_64
  ApportVersion: 2.4-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  skymd  2009 F pulseaudio
   /dev/snd/pcmC0D0c:   skymd  2009 F...m pulseaudio
  Date: Wed Sep 26 00:13:57 2012
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH successful
  Symptom_Card: Built-in Audio - HDA Intel PCH
  Symptom_Jack: Black Headphone Out, Front
  Symptom_PulsePlaybackTest: PulseAudio playback test successful
  Symptom_Type: No sound at all
  Title: [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out, 
Front] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/21/2012
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.19
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 1800
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 10.59
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.19:bd05/21/2012:svnHewlett-Packard:pnHPPaviliondv7NotebookPC:pvr06902120462620100:rvnHewlett-Packard:rn1800:rvr10.59:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion dv7 Notebook PC
  dmi.product.version: 06902120462620100
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1056669/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1090174] Re: firefox print to file path prints to home instead of selected directory

[Steve Langasek]

** Package changed: ia32-libs (Ubuntu) => firefox (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1090174

Title:
  firefox print to file path prints to home instead of selected
  directory

Status in “firefox” package in Ubuntu:
  New

Bug description:
  In Firefox via menus 'File/ Print / Print to File' and specify a
  destination file name (filename.pdf) and directory (via Save in Folder
  / Other ). The pdf is generated in ~/ (the default) instead of the
  directory selected via Save in Folder / Other.

  Build identifier: Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:17.0)
  Gecko/20100101 Firefox/17.0 (on Ubuntu 12.10: 3.6.0-030600-generic
  #201209302035 SMP Mon Oct 1 00:36:01 UTC 2012 x86_64 x86_64 x86_64
  GNU/Linux).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1090174/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1056669] Re: [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out, Front] No sound at all

[Raymond]

post the output of alsa-info.sh

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1056669

Title:
  [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out,
  Front] No sound at all

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  How do I disable auto-mute?

  I'm a ubuntu noob.

  Speakers work fine, but plugging in headphones = no audio. Take it out
  and speakers work fine again.

  Checked alsamixer, saw that the head phone jack was "muted" (MM) and 0.
  If I make it (00), and up the volume, the headphones work.

  Unplug headphones and plug back in, and it's muted once again (MM).

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-10.10-generic 3.5.1
  Uname: Linux 3.5.0-10-generic x86_64
  ApportVersion: 2.4-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  skymd  2009 F pulseaudio
   /dev/snd/pcmC0D0c:   skymd  2009 F...m pulseaudio
  Date: Wed Sep 26 00:13:57 2012
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH successful
  Symptom_Card: Built-in Audio - HDA Intel PCH
  Symptom_Jack: Black Headphone Out, Front
  Symptom_PulsePlaybackTest: PulseAudio playback test successful
  Symptom_Type: No sound at all
  Title: [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out, 
Front] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/21/2012
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.19
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 1800
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 10.59
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.19:bd05/21/2012:svnHewlett-Packard:pnHPPaviliondv7NotebookPC:pvr06902120462620100:rvnHewlett-Packard:rn1800:rvr10.59:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion dv7 Notebook PC
  dmi.product.version: 06902120462620100
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1056669/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1090174] [NEW] firefox print to file path prints to home instead of selected directory

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

In Firefox via menus 'File/ Print / Print to File' and specify a
destination file name (filename.pdf) and directory (via Save in Folder /
Other ). The pdf is generated in ~/ (the default) instead of the
directory selected via Save in Folder / Other.

Build identifier: Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:17.0)
Gecko/20100101 Firefox/17.0 (on Ubuntu 12.10: 3.6.0-030600-generic
#201209302035 SMP Mon Oct 1 00:36:01 UTC 2012 x86_64 x86_64 x86_64
GNU/Linux).

** Affects: firefox (Ubuntu)
 Importance: Undecided
 Status: New

-- 
firefox print to file path prints to home instead of selected directory
https://bugs.launchpad.net/bugs/1090174
You received this bug notification because you are a member of Desktop 
Packages, which is subscribed to firefox in Ubuntu.

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1088780] Re: XOrg configuration for Apple Magic Trackpad needs more vertical sensitivity

[rfkrocktk]

I found a fix for another really annoying misconfiguration when using
two-finger click. Often, when right-clicking something, you'll
automatically click the first right-click menu item instantly, due to
there not being a sufficient timeout between the two-finger click and
the release.

I was able to patch this by adding Option "EmulateMidButtonTime" "100"
to my patch, which I'm going to include here. Better by the day :)

** Attachment added: "60-apple-magic-trackpad.conf"
   
https://bugs.launchpad.net/elementaryos/+bug/1088780/+attachment/3459481/+files/60-apple-magic-trackpad.conf

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1088780

Title:
  XOrg configuration for Apple Magic Trackpad needs more vertical
  sensitivity

Status in elementary OS:
  New
Status in “xorg” package in Ubuntu:
  New

Bug description:
  By default, the Apple Magic Trackpad has way more horizontal
  sensitivity than vertical sensitivity, leading to weird results on
  wide screens and multiple monitor setups. This means that while you
  can span 1920 pixels with one horizontal swipe, you can't pan 1/3 of
  the 1080 pixels with one vertical swipe.

  The attached patch sets the horizontal and vertical resolution to be
  the same so that when you draw a circle on the track pad, you see a
  similar shape drawn by the mouse. Patch should either go into
  /usr/share/X11/xorg.conf.d/ or into /etc/X11/xorg.conf.d/. You must
  restart X in order to see changes with the touchpad. I'm preparing a
  similar patch for the Apple MacBook Pro built-in touch pad.

  ProblemType: Bug
  DistroRelease: elementary OS 0.2
  Package: elementary-desktop 1.287-0~361~precise1 [origin: 
LP-PPA-elementary-os-daily]
  ProcVersionSignature: Ubuntu 3.2.0-34.53-generic 3.2.33
  Uname: Linux 3.2.0-34-generic x86_64
  NonfreeKernelModules: nvidia wl
  ApportVersion: 2.0.1-0ubuntu15+elementary3~precise1
  Architecture: amd64
  CrashDB: elementary_meta
  Date: Mon Dec 10 21:52:30 2012
  InstallationMedia: elementary OS 0.2 "Luna" - Beta 1 amd64 (20121114)
  MarkForUpload: True
  ProcEnviron:
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: elementary-meta
  SuspiciousXErrors:
   
  ThirdParty: True
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/elementaryos/+bug/1088780/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 519262] Re: Provide ability to Follow a user

[Bob Merhebi]

How is this fixed if I still can't with version 3.4.2?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gwibber in Ubuntu.
https://bugs.launchpad.net/bugs/519262

Title:
  Provide ability to Follow a user

Status in Gwibber:
  Fix Released
Status in “gwibber” package in Ubuntu:
  Fix Released

Bug description:
  Binary package hint: gwibber

  Does gwibber have a feature to follow/unfollow a nick ? or did I miss
  something.

  ProblemType: Bug
  Architecture: i386
  Date: Tue Feb  9 17:23:07 2010
  DistroRelease: Ubuntu 10.04
  Package: gwibber 2.0.0~bzr476-0ubuntu3
  PackageArchitecture: all
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcVersionSignature: Ubuntu 2.6.32-6.8-generic
  SourcePackage: gwibber
  Uname: Linux 2.6.32-6-generic i686

To manage notifications about this bug go to:
https://bugs.launchpad.net/gwibber/+bug/519262/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 951439] Re: [soundnua]: gnome-control-center crashed with SIGSEGV

[John Winterton]

no recurrence, so closing is appropriate.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/951439

Title:
  [soundnua]: gnome-control-center crashed with SIGSEGV

Status in “gnome-control-center” package in Ubuntu:
  Invalid

Bug description:
  updates and reboot
  Sound settings crashed on firstrun
  second try alll seems ok

  ProblemType: Crash
  DistroRelease: Ubuntu 12.04
  Package: gnome-control-center 1:3.3.91-0ubuntu3
  ProcVersionSignature: Ubuntu 3.2.0-18.28-generic 3.2.9
  Uname: Linux 3.2.0-18-generic i686
  ApportVersion: 1.94.1-0ubuntu2
  Architecture: i386
  CheckboxSubmission: 8617bffd198177508bf030f94c880aca
  CheckboxSystem: bb422ca46d02494cdbc459927a98bc2f
  Date: Sat Mar 10 11:28:56 2012
  ExecutablePath: /usr/bin/gnome-control-center
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012)
  ProcCmdline: gnome-control-center sound-nua
  SegvAnalysis:
   Segfault happened at: 0x1e0cfd6c:fstl   0x88(%eax)
   PC (0x1e0cfd6c) ok
   source "0x88(%eax)" (0xab32) ok
   SP (0xbfae3900) ok
   Reason could not be automatically determined.
  Signal: 11
  SourcePackage: gnome-control-center
  StacktraceTop:
   ?? () from /usr/lib/control-center-1/panels/libsoundnua.so
   ?? () from /usr/lib/control-center-1/panels/libsoundnua.so
   ?? () from /usr/lib/i386-linux-gnu/libpulse.so.0
   ?? () from /usr/lib/i386-linux-gnu/libpulsecommon-1.1.so
   ?? () from /usr/lib/i386-linux-gnu/libpulsecommon-1.1.so
  Title: [soundnua]: gnome-control-center crashed with SIGSEGV
  UpgradeStatus: Upgraded to precise on 2012-02-16 (23 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  usr_lib_gnome-control-center:
   activity-log-manager-control-center 0.9.3-0ubuntu1
   deja-dup21.90-0ubuntu1
   gnome-bluetooth 3.2.2-0ubuntu3
   indicator-datetime  0.3.91-0ubuntu1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/951439/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1090170] [NEW] WifiDocs/Driver/Ndiswrapper has wrong info about Network Admin

[Kangarooo]

Public bug reported:

WifiDocs/Driver/Ndiswrapper has wrong info about Network Admin

Check in 
https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper#Configuring_Wireless_Network_Settings
Networking Admin tool has no tab Connections in witch to open Wireless settings 
and check Enable roaming mode
Thats couse of bug 570828

** Affects: ubuntu-website
 Importance: Undecided
 Status: New

** Affects: gnome-system-tools (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: ndiswrapper (Ubuntu)
 Importance: Undecided
 Status: New

** Also affects: ndiswrapper (Ubuntu)
   Importance: Undecided
   Status: New

** Also affects: gnome-system-tools (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-system-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1090170

Title:
  WifiDocs/Driver/Ndiswrapper has wrong info about Network Admin

Status in Ubuntu Website Product:
  New
Status in “gnome-system-tools” package in Ubuntu:
  New
Status in “ndiswrapper” package in Ubuntu:
  New

Bug description:
  WifiDocs/Driver/Ndiswrapper has wrong info about Network Admin

  Check in 
https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper#Configuring_Wireless_Network_Settings
  Networking Admin tool has no tab Connections in witch to open Wireless 
settings and check Enable roaming mode
  Thats couse of bug 570828

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-website/+bug/1090170/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 570828] Re: gnome-network-admin on UbuntuStudio doesnt allow to configure either wired networks or wireless

[Kangarooo]

sTILL not fixed. i have installed gnome-system-tools & gnome-network-admin and 
still not showing up Connections tab.
Its is needed for doing step 3.5.1 & 3.5.2 in 
https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper#Configuring_Wireless_Network_Settings

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-system-tools in Ubuntu.
https://bugs.launchpad.net/bugs/570828

Title:
  gnome-network-admin on UbuntuStudio doesnt allow to configure either
  wired networks or wireless

Status in “gnome-system-tools” package in Ubuntu:
  Fix Released

Bug description:
  Binary package hint: gnome-system-tools

  Systems were the problem is found

  UbuntuStudio 10.04 - i386/AMD64

  After installation, there is no easy way to setup networking, either
  wireless or wired.

  the networking management tool doesn't give options or tools to
  configure networks.

  I leave here 3 links with screenshots of the only networks setup that can be 
done after clean install.
  http://dl.dropbox.com/u/1333955/net1.png
  http://dl.dropbox.com/u/1333955/net2.png
  http://dl.dropbox.com/u/1333955/net3.png

  If more information is needed please let me know.

  P.S.: I didn't filed this bug via apport, because i don't have
  networking due to the bug :D

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/570828/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 574067] Re: Network Admin Tool Missing Connection Tab

[Kangarooo]

*** This bug is a duplicate of bug 570828 ***
https://bugs.launchpad.net/bugs/570828

sTILL not fixed. i have installed gnome-system-tools & gnome-network-admin and 
still not showing up Connections tab.
Its is needed for doing step 3.5.1 & 3.5.2 in 
https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper#Configuring_Wireless_Network_Settings

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-system-tools in Ubuntu.
https://bugs.launchpad.net/bugs/574067

Title:
  Network Admin Tool Missing Connection Tab

Status in “gnome-system-tools” package in Ubuntu:
  Invalid

Bug description:
  Binary package hint: gnome-network-admin

  Installed 10.04 LTS on a wiped-clean Toshiba Satellite Pro.

  The network admin tool was not installed neither on the Admin menu, nor could 
I start it from the command line - the OS offered to install it with apt-get):
  cayley@cayley-laptop:~$ network-admin
  The program 'network-admin' is currently not installed.  You can install it 
by typing:
  sudo apt-get install gnome-network-admin

  The Lucid documentation seems to think it should be present (and
  gnome-system-tools 2.30.0 was installed).

  I installed gnome-network-admin from Synaptic Package Manager (also
  version 2.30.0). The "Network" menu item now appears, but it lacks the
  Connections tab, which is the most important one. I do not know how to
  configure wifi connections without it.

  I repeated the 10.04 install, but the effects were exactly the same.

  Note that bug #566811 filed against package gnome-nettool  (and marked
  incomplete- ready for deletion) sounds identical.

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: gnome-network-admin 2.30.0-0ubuntu2
  ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-21-generic i686
  Architecture: i386
  Date: Sun May  2 16:07:44 2010
  InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429)
  ProcEnviron:
   LANG=en_US.utf8
   SHELL=/bin/bash
  SourcePackage: gnome-system-tools

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/574067/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1084296] Re: possible for a 2nd occurrence of a crash not to be sent to errors

[Launchpad Bug Tracker]

This bug was fixed in the package apport - 2.6.1-0ubuntu9

---
apport (2.6.1-0ubuntu9) quantal-proposed; urgency=low

  * Fix OSError crash in mark_report_upload(); regression from
2.6.1-0ubuntu8.

apport (2.6.1-0ubuntu8) quantal-proposed; urgency=low

  * Ignore implausibly low addresses when computing
StacktraceAddressSignature.  These are usually artifacts from gdb when not
having debug symbols, and having too many of them prevents proper
client-side duplicate detection and proper bucketing in daisy.
Backported from trunk r2541. (LP: #1084996)
  * mark_report_upload(): Refresh the .upload stamps if a previous version of
the report was already uploaded, but another instance of the problem
happened since then. Thanks Brian Murray. Backported from trunk r2540.
(LP: #1084296)

apport (2.6.1-0ubuntu7) quantal-proposed; urgency=low

  * data/general-hooks/ubuntu.py: Deal with dpkg_log file being a string
instead of bytes (LP: #1080915)
 -- Martin PittWed, 05 Dec 2012 10:16:00 +

** Changed in: apport (Ubuntu Quantal)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1084296

Title:
  possible for a 2nd occurrence of a crash not to be sent to errors

Status in Apport crash detection/reporting:
  Fix Released
Status in “apport” package in Ubuntu:
  Fix Released
Status in “apport” source package in Precise:
  Fix Committed
Status in “apport” source package in Quantal:
  Fix Released

Bug description:
  [Test Case]

  1) (xeyes &); sleep 1; killall -SEGV xeyes
  2) check /var/crash
  3) (xeyes &); sleep 1; killall -SEGV xeyes
  3) check /var/crash notice that .crash is newer than .upload and .uploaded

  Original Description:

  I was testing errors in the cloud using juju and created a crash
  report for d-feet.  The first time I did this the a .crash file was
  created and then a corresponding .upload and .uploaded file were
  created.  The second time I did this a new .crash file was created but
  a new .upload file was not and subsequently the 2nd occurrence of this
  crash was not sent to the error tracker.

  My /var/crash directory:

  -rw-rw-r-- 1 bdmurray whoopsie   0 Nov 28 10:25 
_usr_bin_d-feet.1000.upload
  -rw--- 1 whoopsie whoopsie   0 Nov 28 13:14 
_usr_bin_d-feet.1000.uploaded
  -rw-r- 1 bdmurray whoopsie 3401262 Nov 28 13:43 _usr_bin_d-feet.1000.crash

  In apport/fileutils.py we can see that there are no checks done to see
  if there is already a .upload or .uploaded file:

  def mark_report_upload(report):
  report = '%s.upload' % report.rsplit('.', 1)[0]
  with open(report, 'a'):
  pass

  So if a .upload for the crash already exists a new one is not created
  nor is the existing one modified.

To manage notifications about this bug go to:
https://bugs.launchpad.net/apport/+bug/1084296/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1080915] Re: trim_dpkg_log can crash with a TypeError

[Launchpad Bug Tracker]

This bug was fixed in the package apport - 2.6.1-0ubuntu9

---
apport (2.6.1-0ubuntu9) quantal-proposed; urgency=low

  * Fix OSError crash in mark_report_upload(); regression from
2.6.1-0ubuntu8.

apport (2.6.1-0ubuntu8) quantal-proposed; urgency=low

  * Ignore implausibly low addresses when computing
StacktraceAddressSignature.  These are usually artifacts from gdb when not
having debug symbols, and having too many of them prevents proper
client-side duplicate detection and proper bucketing in daisy.
Backported from trunk r2541. (LP: #1084996)
  * mark_report_upload(): Refresh the .upload stamps if a previous version of
the report was already uploaded, but another instance of the problem
happened since then. Thanks Brian Murray. Backported from trunk r2540.
(LP: #1084296)

apport (2.6.1-0ubuntu7) quantal-proposed; urgency=low

  * data/general-hooks/ubuntu.py: Deal with dpkg_log file being a string
instead of bytes (LP: #1080915)
 -- Martin PittWed, 05 Dec 2012 10:16:00 +

** Changed in: apport (Ubuntu Quantal)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1080915

Title:
  trim_dpkg_log can crash with a TypeError

Status in “apport” package in Ubuntu:
  Fix Released
Status in “apport” source package in Quantal:
  Fix Released

Bug description:
  [Impact]

  Not all apport-package bug reports are having a DuplicateSignature
  created, which prevents the retracer from automatically marking
  duplicate bugs.  Additionally, as the duplicate siganture is used to
  see whether or not a reporter has encountered the crash before (to
  prevent reporting) we may be receiving bug reports we do not want.

  [Test Case]
  1) Download python3-lxml.0.crash from this bug report
  2) Copy python3-lxml.0.crash to /var/crash
  3) Run 'ubuntu-bug /var/crash/python3-lxml.0.crash'
  4) Observe a Traceback in the terminal in which you ran ubuntu-bug

  Repeat steps 1-4 using the version of apport from quantal-proposed and
  you will not see a Traceback.  Do not submit the crash to Launchpad.

  [Regression Potential]
  Apport carries on in the event that there is an exception in package or 
general hooks, which is why this went undiscovered for a while, subsequently 
regressions would only occur in the DuplicateSignature creation.

  = Orignal Description=

  Some apport-package bug reports don't have a DuplicateSignature when
  they should.  I was able to obtain a problematic crash file and
  running ubuntu-bug with I received the following traceback:

  ERROR: hook /usr/share/apport/general-hooks/ubuntu.py crashed:
  Traceback (most recent call last):
    File "/usr/lib/python3/dist-packages/apport/report.py", line 197, in 
_run_hook
  symb['add_info'](report, ui)
    File "/usr/share/apport/general-hooks/ubuntu.py", line 62, in add_info
  check_attachment_for_errors(report, attachment)
    File "/usr/share/apport/general-hooks/ubuntu.py", line 171, in 
check_attachment_for_errors
  trim_dpkg_log(report)
    File "/usr/share/apport/general-hooks/ubuntu.py", line 428, in trim_dpkg_log
  if start_re.match(line) or trim_re.match(line):
  TypeError: can't use a bytes pattern on a string-like object

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1080915/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 847484] Re: quassel crashed with SIGSEGV in _IO_vfprintf_internal()

[Rafael Belmonte]

Okay, I have done some new tests, in two totally different computers, one with 
Intel graphics card and the other with ATI/AMD graphics card.
With X server to becomes crazy I mean, all windows starting to flash and being 
totally unresponsive for instance.
An important discovery is that the bug only occurs when Quassel window is 
maximized and then you put it in full-screen. Then X server freezes screen 
image and becomes totally unresponsive to mouse or keyboard events (or in rare 
occasions, it becomes a little crazy). At this point, with Intel graphics 
computer, I can jump to a tty and restart kdm service to can use X server 
again. But in the ATI graphics computer, going to tty causes a total system 
hang, resulting in a dark but flashing screen, Alt + Impr + k does nothing, but 
Alt + Impr + b hardly reboots the system.
While X server was frozen, I have take a look at CPU and memory usage with top 
command, and I did not see any strange.

Can't you reproduce the bug? Can I give any other valuable debug
information or backtrace?

** Changed in: quassel (Ubuntu)
   Status: Incomplete => New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/847484

Title:
  quassel crashed with SIGSEGV in _IO_vfprintf_internal()

Status in “quassel” package in Ubuntu:
  New
Status in “xorg-server” package in Ubuntu:
  New

Bug description:
  Quassel crashed and also made Xorg to crash when I switch to full
  screen mode.

  ProblemType: Crash
  DistroRelease: Ubuntu 11.10
  Package: quassel 0.7.3-0ubuntu1
  ProcVersionSignature: Ubuntu 3.0.0-10.16-generic 3.0.4
  Uname: Linux 3.0.0-10-generic x86_64
  ApportVersion: 1.22.1-0ubuntu2
  Architecture: amd64
  Date: Mon Sep 12 02:31:35 2011
  EcryptfsInUse: Yes
  ExecutablePath: /usr/bin/quassel
  InstallationMedia: Kubuntu 11.10 "Oneiric Ocelot" - Beta amd64 (20110901)
  ProcCmdline: /usr/bin/quassel
  SegvAnalysis:
   Segfault happened at: 0x7fdd526ec522 <_IO_vfprintf_internal+50>: mov
%eax,-0x518(%rbp)
   PC (0x7fdd526ec522) ok
   source "%eax" ok
   destination "-0x518(%rbp)" (0x7fffda001b28) not located in a known VMA 
region (needed writable region)!
   Stack memory exhausted (SP below stack segment)
  SegvReason: writing unknown VMA
  Signal: 11
  SourcePackage: quassel
  StacktraceTop:
   _IO_vfprintf_internal (s=0x7fffda002050, format=0x7fdd54215e0d 
"LANGUAGE=%s", ap=0x7fffda0021c8) at vfprintf.c:245
   ___vsnprintf_chk (s=0xe88750 "", maxlen=, flags=1, 
slen=, format=0x7fdd54215e0d "LANGUAGE=%s", args=0x7fffda0021c8) 
at vsnprintf_chk.c:65
   ___snprintf_chk (s=, maxlen=, flags=, slen=, format=) at snprintf_chk.c:36
   snprintf (__fmt=0x7fdd54215e0d "LANGUAGE=%s", __n=42, __s=) 
at /usr/include/x86_64-linux-gnu/bits/stdio2.h:66
   KCatalogPrivate::setupGettextEnv (this=0xe71e80) at 
../../kdecore/localization/kcatalog.cpp:183
  Title: quassel crashed with SIGSEGV in _IO_vfprintf_internal()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  XsessionErrors:
   (process:3445): libindicate-WARNING **: Unable to get property data: 
GDBus.Error:com.canonical.indicate.NO_SUCH_PROPERTY: Indicator 1 has no 
property named 'icon'
   (process:3445): libindicate-WARNING **: Unable to get property data: 
GDBus.Error:com.canonical.indicate.NO_SUCH_PROPERTY: Indicator 1 has no 
property named 'count'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/quassel/+bug/847484/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1084996] Re: StacktraceAddressSignature is missing

[Launchpad Bug Tracker]

This bug was fixed in the package apport - 2.6.1-0ubuntu9

---
apport (2.6.1-0ubuntu9) quantal-proposed; urgency=low

  * Fix OSError crash in mark_report_upload(); regression from
2.6.1-0ubuntu8.

apport (2.6.1-0ubuntu8) quantal-proposed; urgency=low

  * Ignore implausibly low addresses when computing
StacktraceAddressSignature.  These are usually artifacts from gdb when not
having debug symbols, and having too many of them prevents proper
client-side duplicate detection and proper bucketing in daisy.
Backported from trunk r2541. (LP: #1084996)
  * mark_report_upload(): Refresh the .upload stamps if a previous version of
the report was already uploaded, but another instance of the problem
happened since then. Thanks Brian Murray. Backported from trunk r2540.
(LP: #1084296)

apport (2.6.1-0ubuntu7) quantal-proposed; urgency=low

  * data/general-hooks/ubuntu.py: Deal with dpkg_log file being a string
instead of bytes (LP: #1080915)
 -- Martin PittWed, 05 Dec 2012 10:16:00 +

** Changed in: apport (Ubuntu Quantal)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1084996

Title:
   StacktraceAddressSignature is missing

Status in Apport crash detection/reporting:
  Fix Released
Status in “apport” package in Ubuntu:
  Fix Released
Status in “apport” source package in Precise:
  Fix Committed
Status in “apport” source package in Quantal:
  Fix Released

Bug description:
  Some crash reports are missing a StacktraceAddressSignature field,
  which prevents proper processing by whoopsie.

  I seem to be able to reproduce this rather reliably with some simple
  X.org programs, such as

  SRU TEST CASE:
  $ (xeyes &); sleep 1; killall -SEGV xeyes
  $ (xcalc &); sleep 1; killall -SEGV xcalc

  With the current versions in precise and quantal, these reports
  usually do not have a StacktraceAddressSignature field in the details.
  With the proposed version they should.

To manage notifications about this bug go to:
https://bugs.launchpad.net/apport/+bug/1084996/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1056669] Re: [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out, Front] No sound at all

[Nicolas Maître]

It seems that I have the exact same hardware config as Steven, and I happen to 
have the exact same problem.
There is a workaround for this when using pulseaudio.
In the file 
/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf, comment 
the 2 lines below (around line 69):
[Element Speaker]
;switch = off
;volume = off

That solves the headphones muting.

Now, about the driver fix, I'm curious to know how I can do what you're
asking, Raymond.

Also, I've just realized that the subwoofer is not working.Pulseaudio only lets 
me choose analog stereo or surround 4.0.  Isn't it a related issue? 
I've tried a lot of parameters to the snd_hda_intel module, none appears to 
solve that. I don't know if I have the best driver's parameters but it looks 
like I have the same as Steven's since I have the same content for 
*_pin_configs sysfs files (I might be wrong, I don't know anything about the 
linux audio internals ; so, Steven, if you've managed to get the subwoofer 
working, I'm eager to know how!

Thanks.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1056669

Title:
  [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out,
  Front] No sound at all

Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  How do I disable auto-mute?

  I'm a ubuntu noob.

  Speakers work fine, but plugging in headphones = no audio. Take it out
  and speakers work fine again.

  Checked alsamixer, saw that the head phone jack was "muted" (MM) and 0.
  If I make it (00), and up the volume, the headphones work.

  Unplug headphones and plug back in, and it's muted once again (MM).

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu2
  ProcVersionSignature: Ubuntu 3.5.0-10.10-generic 3.5.1
  Uname: Linux 3.5.0-10-generic x86_64
  ApportVersion: 2.4-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  skymd  2009 F pulseaudio
   /dev/snd/pcmC0D0c:   skymd  2009 F...m pulseaudio
  Date: Wed Sep 26 00:13:57 2012
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH successful
  Symptom_Card: Built-in Audio - HDA Intel PCH
  Symptom_Jack: Black Headphone Out, Front
  Symptom_PulsePlaybackTest: PulseAudio playback test successful
  Symptom_Type: No sound at all
  Title: [HP Pavilion dv7 Notebook PC, IDT 92HD81B1X5, Black Headphone Out, 
Front] No sound at all
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/21/2012
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.19
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 1800
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 10.59
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.19:bd05/21/2012:svnHewlett-Packard:pnHPPaviliondv7NotebookPC:pvr06902120462620100:rvnHewlett-Packard:rn1800:rvr10.59:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion dv7 Notebook PC
  dmi.product.version: 06902120462620100
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1056669/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1071001] Re: Sound Card not detected NM10/ICH7 Intel HDA Internal

[Antonio.oria]

** Also affects: alsa-driver
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1071001

Title:
  Sound Card not detected NM10/ICH7 Intel HDA Internal

Status in ALSA driver:
  New
Status in “alsa-driver” package in Ubuntu:
  Confirmed

Bug description:
  This worked fine in 10.10, I did a clean install of 12.10 and sound
  has not worked. Can't find any other bugs that help me fix or sort
  this problem. Sound Settings reports only "Dummy Output" in the output
  settings.

  Please let me know if any other info is required.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
  Uname: Linux 3.5.0-17-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.6.1-0ubuntu3
  Architecture: i386
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  andy   1655 F pulseaudio
  Date: Wed Oct 24 20:46:09 2012
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Beta i386 (20121003)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Title: PCI/internal sound card not detected
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/19/2008
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 2.6.0
  dmi.board.name: 0GH911
  dmi.board.vendor: Dell Inc.
  dmi.chassis.type: 7
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvr2.6.0:bd05/19/2008:svnDellInc.:pnPrecisionWorkStation390:pvr:rvnDellInc.:rn0GH911:rvr:cvnDellInc.:ct7:cvr:
  dmi.product.name: Precision WorkStation 390
  dmi.sys.vendor: Dell Inc.
  modified.conffile..etc.modprobe.d.alsa.base.conf: [modified]
  mtime.conffile..etc.modprobe.d.alsa.base.conf: 2012-10-24T20:28:30.229865

To manage notifications about this bug go to:
https://bugs.launchpad.net/alsa-driver/+bug/1071001/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 951736] Re: Cannot change brightness on laptop with ATI Radeon 6470M

[Pali]

That patch series was released in new linux kernel 3.7. It is possible
to backport them to ubuntu kernel?

** Package changed: xserver-xorg-video-ati (Ubuntu) => linux (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-ati in Ubuntu.
https://bugs.launchpad.net/bugs/951736

Title:
  Cannot change brightness on laptop with ATI Radeon 6470M

Status in The Linux Kernel:
  Fix Released
Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  "When I press Fn+F9 or F10 which are the keyboard buttons to
  decrease/increase the screen brightness of my HP Probook 6560b laptop,
  nothing happens."

  This was quoted from the following bug from the kernel.org bugtracker
  which has some more infos:
  https://bugzilla.kernel.org/show_bug.cgi?id=40862

  I manually installed the precise kernel on my oneiric install to see
  if it is fixed with a newer kernel, didn't help.

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: xserver-xorg-video-radeon 1:6.14.99~git20110811.g93fc084-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-18.28-generic 3.2.9
  Uname: Linux 3.2.0-18-generic x86_64
  ApportVersion: 1.23-0ubuntu4
  Architecture: amd64
  Date: Sat Mar 10 20:02:31 2012
  InstallationMedia: Kubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111011)
  SourcePackage: xserver-xorg-video-ati
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/951736/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1090059] Re: [A520-P.BE52P1, Realtek ALC269VB, Speaker, Internal] No sound at all

[Raymond]

> Even though the operational system declares that the sound card is
available and that the system sound is not muted, no sound is played.

no sound because speaker playback switch is muted

do you mean speaker is muted even when auto mute is disabled ?

it is most likely pulseaudio switch off the speaker when headphone is
plugged

sinks:
alsa_output.pci-_00_1b.0.analog-stereo/#0: Áudio interno 
Estéreo analógico
sources:
alsa_output.pci-_00_1b.0.analog-stereo.monitor/#0: Monitor 
of Áudio interno Estéreo analógico
alsa_input.pci-_00_1b.0.analog-stereo/#1: Áudio interno 
Estéreo analógico
ports:
analog-output-speaker: Alto-falantes (priority 1, 
available: no)
properties:

analog-output-headphones: Fones de ouvido analógico (priority 
9000, available: yes)
properties:


Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 87
  Mono:
  Front Left: Playback 87 [100%] [0.00dB] [off]
  Front Right: Playback 87 [100%] [0.00dB] [off]


Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'

control.16 {
iface CARD
name 'Headphone Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1090059

Title:
  [A520-P.BE52P1, Realtek ALC269VB, Speaker, Internal] No sound at all

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  Even though the operational system declares that the sound card is
  available and that the system sound is not muted, no sound is played.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu3
  ProcVersionSignature: Ubuntu 3.5.0-19.30-generic 3.5.7
  Uname: Linux 3.5.0-19-generic x86_64
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  d1ngell2056 F pulseaudio
   /dev/snd/pcmC0D0p:   d1ngell2056 F...m pulseaudio
  Date: Thu Dec 13 16:30:35 2012
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2012-12-03 (10 days ago)
  InstallationMedia: Ubuntu 12.04.1 LTS "Precise Pangolin" - Release amd64 
(20120823.1)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:PCH failed
  Symptom_Card: Áudio interno - HDA Intel PCH
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  lightdm1662 F pulseaudio
d1ngell2056 F pulseaudio
   /dev/snd/pcmC0D0p:   d1ngell2056 F...m pulseaudio
  Symptom_Jack: Speaker, Internal
  Symptom_Type: No sound at all
  Title: [A520-P.BE52P1, Realtek ALC269VB, Speaker, Internal] No sound at all
  UpgradeStatus: Upgraded to quantal on 2012-12-03 (10 days ago)
  dmi.bios.date: 12/07/2011
  dmi.bios.vendor: INSYDE
  dmi.bios.version: QLHLU262
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: QLH
  dmi.board.vendor: Quanta
  dmi.board.version: TBD
  dmi.chassis.asset.tag: Chassis Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Quanta
  dmi.chassis.version: TBD
  dmi.modalias: 
dmi:bvnINSYDE:bvrQLHLU262:bd12/07/2011:svnLGElectronics:pnA520-P.BE52P1:pvrTBD:rvnQuanta:rnQLH:rvrTBD:cvnQuanta:ct10:cvrTBD:
  dmi.product.name: A520-P.BE52P1
  dmi.product.version: TBD
  dmi.sys.vendor: LG Electronics

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1090059/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1016818] Re: Immediate crash on startup

[Bill Wenz]

*** This bug is a duplicate of bug 507089 ***
https://bugs.launchpad.net/bugs/507089

I recently upgraded to the latest version and everything worked fine.
Yesterday Thunderbird crashes on start-up. Could you tell me in VERY
simple terms how to get my email up and running? Can I uninstall and
reinstall and my all emails and address remain intact?

Thanks in advance

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/1016818

Title:
  Immediate crash on startup

Status in Mozilla Thunderbird Mail and News:
  Confirmed
Status in “thunderbird” package in Ubuntu:
  Triaged

Bug description:
  Thunderbird received a version bump today.  After Update Manager
  installed the new version, any attempts to launch Thunderbird result
  in an immediate crash.  This happens even if I remove ~/.thunderbird

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: thunderbird 13.0.1+build1-0ubuntu0.12.04.1
  ProcVersionSignature: Ubuntu 3.2.0-25.40-generic 3.2.18
  Uname: Linux 3.2.0-25-generic x86_64
  NonfreeKernelModules: nvidia
  AddonCompatCheckDisabled: False
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  rogerb 2467 F pulseaudio
   /dev/snd/controlC0:  rogerb 2467 F pulseaudio
   /dev/snd/pcmC0D0p:   rogerb 2467 F...m pulseaudio
  BuildID: 20120615181619
  CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 
not found.
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xf312 irq 49'
 Mixer name : 'Realtek ALC889'
 Components : 'HDA:10ec0889,80860033,0014'
 Controls  : 51
 Simple ctrls  : 24
  Card1.Amixer.info:
   Card hw:1 'CinemaTM'/'Microsoft Microsoft® LifeCam Cinema(TM) at 
usb-:00:1d.0-1.7.2, high speed'
 Mixer name : 'USB Mixer'
 Components : 'USB045e:075d'
 Controls  : 2
 Simple ctrls  : 1
  Card1.Amixer.values:
   Simple mixer control 'Mic',0
 Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum
 Capture channels: Mono
 Limits: Capture 0 - 56
 Mono: Capture 47 [84%] [27.00dB] [on]
  Channel: release
  Date: Fri Jun 22 23:06:35 2012
  Extensions: extensions.sqlite corrupt or missing
  ForcedLayersAccel: False
  IncompatibleExtensions: Unavailable (corrupt or non-existant 
compatibility.ini or extensions.sqlite)
  IpRoute:
   default via 192.168.1.1 dev eth0  proto static 
   169.254.0.0/16 dev eth0  scope link  metric 1000 
   192.168.1.0/24 dev eth0  proto kernel  scope link  src 192.168.1.53  metric 1
  IwConfig:
   lono wireless extensions.
   
   eth0  no wireless extensions.
  Locales: extensions.sqlite corrupt or missing
  PrefSources:
   /etc/thunderbird/syspref.js
   prefs.js
   user.js
  Profiles: Profile0 (Default) - LastVersion=13.0.1/20120615181619
  RfKill:
   
  RunningIncompatibleAddons: False
  SourcePackage: thunderbird
  Themes: extensions.sqlite corrupt or missing
  UpgradeStatus: Upgraded to precise on 2012-04-30 (54 days ago)
  dmi.bios.date: 06/30/2011
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: KGIBX10J.86A.5936.2011.0630.2250
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: DP55WG
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAE57269-404
  dmi.chassis.type: 2
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrKGIBX10J.86A.5936.2011.0630.2250:bd06/30/2011:svn:pn:pvr:rvnIntelCorporation:rnDP55WG:rvrAAE57269-404:cvn:ct2:cvr:
  ftp_proxy: http://192.168.1.25:8080
  http_proxy: http://192.168.1.25:8080

To manage notifications about this bug go to:
https://bugs.launchpad.net/thunderbird/+bug/1016818/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 606292] Re: WebDAV backend leaks a lot of memory

[Michael Terry]

OK, circling back on this.  For testing, I've found that
https://cloudsafe.com/ gives free 2GB webdav accounts for use.  Once
your account is set up, you can reproduce a climbing VIRT count in top
by doing the following:

gvfs-mount davs://XXX.webdav.cloudsafe.com/
while true; do gvfs-copy YYY davs://XXX.webdav.cloudsafe.com/; done

Looking further.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/606292

Title:
  WebDAV backend leaks a lot of memory

Status in “gvfs” package in Ubuntu:
  Confirmed

Bug description:
  Back-up over WebDAV to on-line storage fails after it has run for a
  few hours. This is the kind of error message I get:

  BackendException: Could not copy /home/xx/.dejatmp/duplicity-
  6Mx8qi-tempdir/mktemp-oUPEQc-231 to dav://webdav.4shared.com/wa/Backup
  /duplicity-full.20100716T042630Z.vol230.difftar.gpg

  The temp directory is empty except for an empty deja-dup.log after the
  crash. The generated deja-dup gconf is attached.

  I'm running:
  deja-dup  14.2-0ubuntu0lucid1
  duplicity 0.6.08b-0ubuntu2

  on Linux Mint 9 Isadora x64

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/606292/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 951736] Re: Cannot change brightness on laptop with ATI Radeon 6470M

[Bug Watch Updater]

** Changed in: linux
   Status: Incomplete => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-ati in Ubuntu.
https://bugs.launchpad.net/bugs/951736

Title:
  Cannot change brightness on laptop with ATI Radeon 6470M

Status in The Linux Kernel:
  Fix Released
Status in “xserver-xorg-video-ati” package in Ubuntu:
  Confirmed

Bug description:
  "When I press Fn+F9 or F10 which are the keyboard buttons to
  decrease/increase the screen brightness of my HP Probook 6560b laptop,
  nothing happens."

  This was quoted from the following bug from the kernel.org bugtracker
  which has some more infos:
  https://bugzilla.kernel.org/show_bug.cgi?id=40862

  I manually installed the precise kernel on my oneiric install to see
  if it is fixed with a newer kernel, didn't help.

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: xserver-xorg-video-radeon 1:6.14.99~git20110811.g93fc084-0ubuntu1
  ProcVersionSignature: Ubuntu 3.2.0-18.28-generic 3.2.9
  Uname: Linux 3.2.0-18-generic x86_64
  ApportVersion: 1.23-0ubuntu4
  Architecture: amd64
  Date: Sat Mar 10 20:02:31 2012
  InstallationMedia: Kubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111011)
  SourcePackage: xserver-xorg-video-ati
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/951736/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1086783] Re: New PolicyKit 0.106 changes configuration file format

[Bug Watch Updater]

** Changed in: policykit-1 (Debian)
   Status: Unknown => New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to policykit-1 in Ubuntu.
https://bugs.launchpad.net/bugs/1086783

Title:
  New PolicyKit 0.106 changes configuration file format

Status in “policykit-1” package in Ubuntu:
  Confirmed
Status in “policykit-1” package in Debian:
  New

Bug description:
  From the NEWS file:

  This is polkit 0.106. There's a major change in this release which is
  a switch from .pkla files (keyfile-format) to .rules files
  (JavaScript).

  We may want to hold off on the new version because it requires
  rewriting the configuration files, and adds a dependency on mozjs185,
  which will need a MIR (and getting a MIR may be problematic)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/policykit-1/+bug/1086783/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1051829] Re: RecoverableError dialog from software-center

[Brian Murray]

Hello Akshar, or anyone else affected,

Accepted software-center into quantal-proposed. The package will build
now and be available at http://launchpad.net/ubuntu/+source/software-
center/5.4.1.3 in a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed.  Your feedback will aid us getting this update
out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested, and change the tag
from verification-needed to verification-done. If it does not fix the
bug for you, please add a comment stating that, and change the tag to
verification-failed.  In either case, details of your testing will help
us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Description changed:

- TEST CASE:
- - regression test enough, install a application and verify that it still works
+ TEST CASE:- regression test enough, install a application and verify
+ that it still works
  
  - for a real test you will have to get into a situation where there is a
  real transaction failure like logging into a system that has no
  policykit-authentication-agent running. this can be done via xfce and
  killall polkit-gnome-authentication-agent-1
  
+ (I'd imagine you could also install a package of bad quality (I believe
+ Google Chrome is one based off another SRU I looked at today.) and
+ inspect the .crash file in /var/crash to see what the DuplicateSignature
+ looks like.)
+ 
  REGRESSION POTENTIAL: low, this code is triggered if there is a error
  already, the point of it is to make it easier to detect the error class
  via errors.ubuntu.com
  
- 
  triggered when I started the computer.
  
- ProblemType: RecoverableProblem
- DistroRelease: Ubuntu 12.10
+ ProblemType: RecoverableProblemDistroRelease: Ubuntu 12.10
  Package: software-center 5.3.13
  ProcVersionSignature: Ubuntu 3.5.0-14.19-generic 3.5.3
  Uname: Linux 3.5.0-14-generic i686
  ApportVersion: 2.5.1-0ubuntu7
  Architecture: i386
  Date: Mon Sep 17 12:04:09 2012
  ExecutablePath: /usr/share/software-center/software-center
  ExecutableTimestamp: 1347609407
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Alpha i386 (20120912)
  InterpreterPath: /usr/bin/python2.7
  PackageArchitecture: all
  ProcCmdline: /usr/bin/python /usr/bin/software-center
  ProcCwd: /home/matang
  ProcEnviron:
   LANGUAGE=en_IN:en
   PATH=(custom, no user)
   LANG=en_IN
-  SHELL=/bin/bash
- SourcePackage: software-center
+  SHELL=/bin/bashSourcePackage: software-center
  Title: software-center crashed with  in _run_transaction()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo

** Changed in: software-center (Ubuntu Quantal)
   Status: In Progress => Fix Committed

** Tags added: verification-needed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/1051829

Title:
  RecoverableError dialog from software-center

Status in “software-center” package in Ubuntu:
  Fix Released
Status in “software-center” source package in Quantal:
  Fix Committed

Bug description:
  TEST CASE:- regression test enough, install a application and verify
  that it still works

  - for a real test you will have to get into a situation where there is
  a real transaction failure like logging into a system that has no
  policykit-authentication-agent running. this can be done via xfce and
  killall polkit-gnome-authentication-agent-1

  (I'd imagine you could also install a package of bad quality (I
  believe Google Chrome is one based off another SRU I looked at today.)
  and inspect the .crash file in /var/crash to see what the
  DuplicateSignature looks like.)

  REGRESSION POTENTIAL: low, this code is triggered if there is a error
  already, the point of it is to make it easier to detect the error
  class via errors.ubuntu.com

  triggered when I started the computer.

  ProblemType: RecoverableProblemDistroRelease: Ubuntu 12.10
  Package: software-center 5.3.13
  ProcVersionSignature: Ubuntu 3.5.0-14.19-generic 3.5.3
  Uname: Linux 3.5.0-14-generic i686
  ApportVersion: 2.5.1-0ubuntu7
  Architecture: i386
  Date: Mon Sep 17 12:04:09 2012
  ExecutablePath: /usr/share/software-center/software-center
  ExecutableTimestamp: 1347609407
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Alpha i386 (20120912)
  InterpreterPath: /usr/bin/python2.7
  PackageArchitecture: all
  ProcCmdline: /usr/bin/python /usr/bin/software-center
  ProcCwd: /home/matang
  ProcEnviron:
   LANGUAGE=en_IN:en
   PATH=(custom, no user)
   LANG=en_IN
   SHELL=/bin/bashSourcePackage: software-center
  Title: s

[Desktop-packages] [Bug 1009967] Re: Installed programs disappear from “What's new” and “Best rated” sections after restarting USC

[Brian Murray]

Hello Michal, or anyone else affected,

Accepted software-center into quantal-proposed. The package will build
now and be available at http://launchpad.net/ubuntu/+source/software-
center/5.4.1.3 in a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed.  Your feedback will aid us getting this update
out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested, and change the tag
from verification-needed to verification-done. If it does not fix the
bug for you, please add a comment stating that, and change the tag to
verification-failed.  In either case, details of your testing will help
us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Changed in: software-center (Ubuntu Quantal)
   Status: Triaged => Fix Committed

** Tags added: verification-needed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/1009967

Title:
  Installed programs disappear from “What's new” and “Best rated”
  sections after restarting USC

Status in “software-center” package in Ubuntu:
  Fix Released
Status in “software-center” source package in Quantal:
  Fix Committed
Status in “software-center” source package in Raring:
  Fix Released

Bug description:
  Ubuntu 12.04, USC 5.2.2.2

  TEST CASE:
  1. install quantal
  2. install ubuntu-restricted-extas
  3. open software-center and verify that ubuntu-restricted-extras is not in 
the top-rated list
  4. install software-center from quantal-proposed
  5. open software-center and verify that ubuntu-restricted-extras is now 
showing up in the top-rated list in the front page

  Regression potential: low, its just a .menu-file change

  I've installed an app which was in “What's new” category. Later on, after 
restarting USC, I noticed the app I installed disappeared from “What's new” 
list. I was confused because I wanted to review the app. Well, I thought, 
probably there was a problem with the app and it was removed from USC. Tough 
luck.
  After few days I've installed another app from “What's new” list and again 
noticed the app is no longer there after restarting USC. This time I thought it 
can't be some coincidence. I've tested a little more and it looks like a bug in 
USC.

  The problem also affects apps listed in “Best rated” and “Recommended”
  categories.

  : "On the home
  screen, the “What’s New” area should ... [be] excluding items that you
  have already installed. ... A separate “What’s New” screen ... [should
  list applications] regardless of whether they are installed."

  : "On the home
  screen, the “Top Rated” area should ... [list items] regardless of
  whether they are installed ... A separate “Top Rated” screen ...
  [should also list items] regardless of whether they are installed."

  :
  "The full set of recommendations should be, out of all software not
  currently installed, either the strongest 60 recommendations or all
  those with a confidence value of X or higher — whichever is fewer."

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1009967/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1067634] Re: Crashes for debs without a description

[Brian Murray]

Hello Michael, or anyone else affected,

Accepted software-center into quantal-proposed. The package will build
now and be available at http://launchpad.net/ubuntu/+source/software-
center/5.4.1.3 in a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed.  Your feedback will aid us getting this update
out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested, and change the tag
from verification-needed to verification-done. If it does not fix the
bug for you, please add a comment stating that, and change the tag to
verification-failed.  In either case, details of your testing will help
us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Changed in: software-center (Ubuntu Quantal)
   Status: New => Fix Committed

** Tags added: verification-needed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/1067634

Title:
  Crashes for debs without a description

Status in “software-center” package in Ubuntu:
  Fix Released
Status in “software-center” source package in Quantal:
  Fix Committed

Bug description:
  The deb file code crashes for deb packages without a description like
  e.g. "error-package_1.0_1.0_all.deb" from the gdebi testsuite.

  TEST CASE:
  - a regression test to open a existing deb is enough as this is a rather 
uncommon situation

  REGRESSION POTENTIAL: low, I can't think of how this could regress

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1067634/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1083694] Re: crash/hang when submiting review updates

[Brian Murray]

Hello Michael, or anyone else affected,

Accepted software-center into quantal-proposed. The package will build
now and be available at http://launchpad.net/ubuntu/+source/software-
center/5.4.1.3 in a few hours, and then in the -proposed repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed.  Your feedback will aid us getting this update
out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested, and change the tag
from verification-needed to verification-done. If it does not fix the
bug for you, please add a comment stating that, and change the tag to
verification-failed.  In either case, details of your testing will help
us make a better decision.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance!

** Changed in: software-center (Ubuntu Quantal)
   Status: In Progress => Fix Committed

** Tags added: verification-needed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pygobject in Ubuntu.
https://bugs.launchpad.net/bugs/1083694

Title:
  crash/hang when submiting review updates

Status in Python bindings for GObject:
  Fix Released
Status in “pygobject” package in Ubuntu:
  Fix Released
Status in “software-center” package in Ubuntu:
  Fix Released
Status in “pygobject” source package in Quantal:
  Invalid
Status in “software-center” source package in Quantal:
  Fix Committed

Bug description:
  Due to a error in the glib bindings submit a review or submiting
  usefulness data is very slow and often fails entirely:

  TEST CASE:
  - open software-center
  - go to a app with reviews
  - click on "useful": "YES"
  - verify that it takes a long time (and often fails entirely)

  - install new version of software-center, python-gi from quantal-proposed
  - repeat the above steps and verify that it works this time

  REGRESSION POTENTIAL: low, the threds_init() calls was there for all
  previous pervsions but the crash in pygobject from bug #1078297 made
  us disable it with the ill effects from disabling like the hang that
  is outlined here.

To manage notifications about this bug go to:
https://bugs.launchpad.net/pygobject/+bug/1083694/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1009967] Re: Installed programs disappear from “What's new” and “Best rated” sections after restarting USC

[Brian Murray]

** Changed in: software-center (Ubuntu Quantal)
   Status: New => Triaged

** Changed in: software-center (Ubuntu Quantal)
   Importance: Undecided => Medium

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/1009967

Title:
  Installed programs disappear from “What's new” and “Best rated”
  sections after restarting USC

Status in “software-center” package in Ubuntu:
  Fix Released
Status in “software-center” source package in Quantal:
  Triaged
Status in “software-center” source package in Raring:
  Fix Released

Bug description:
  Ubuntu 12.04, USC 5.2.2.2

  TEST CASE:
  1. install quantal
  2. install ubuntu-restricted-extas
  3. open software-center and verify that ubuntu-restricted-extras is not in 
the top-rated list
  4. install software-center from quantal-proposed
  5. open software-center and verify that ubuntu-restricted-extras is now 
showing up in the top-rated list in the front page

  Regression potential: low, its just a .menu-file change

  I've installed an app which was in “What's new” category. Later on, after 
restarting USC, I noticed the app I installed disappeared from “What's new” 
list. I was confused because I wanted to review the app. Well, I thought, 
probably there was a problem with the app and it was removed from USC. Tough 
luck.
  After few days I've installed another app from “What's new” list and again 
noticed the app is no longer there after restarting USC. This time I thought it 
can't be some coincidence. I've tested a little more and it looks like a bug in 
USC.

  The problem also affects apps listed in “Best rated” and “Recommended”
  categories.

  : "On the home
  screen, the “What’s New” area should ... [be] excluding items that you
  have already installed. ... A separate “What’s New” screen ... [should
  list applications] regardless of whether they are installed."

  : "On the home
  screen, the “Top Rated” area should ... [list items] regardless of
  whether they are installed ... A separate “Top Rated” screen ...
  [should also list items] regardless of whether they are installed."

  :
  "The full set of recommendations should be, out of all software not
  currently installed, either the strongest 60 recommendations or all
  those with a confidence value of X or higher — whichever is fewer."

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1009967/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1090124] [NEW] Symbols not shown

[John Franklin]

Public bug reported:

Character map  only shows alpha-numeric characters (incl accents) but no
symbols, even if a font such as OpenSymbol is selected.  Indeed, if I
select the OpenSymbol font, the display doesn't change at all from the
previous font. The symbol fonts are installed - I can see what I want in
LibreOffice or GIMP for example. The KCharSelect program also doesn't
show the symbols. What's wrong? Using Ubuntu 12.04.

** Affects: gucharmap (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gucharmap in Ubuntu.
https://bugs.launchpad.net/bugs/1090124

Title:
  Symbols not shown

Status in “gucharmap” package in Ubuntu:
  New

Bug description:
  Character map  only shows alpha-numeric characters (incl accents) but
  no symbols, even if a font such as OpenSymbol is selected.  Indeed, if
  I select the OpenSymbol font, the display doesn't change at all from
  the previous font. The symbol fonts are installed - I can see what I
  want in LibreOffice or GIMP for example. The KCharSelect program also
  doesn't show the symbols. What's wrong? Using Ubuntu 12.04.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gucharmap/+bug/1090124/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1080041] Re: rhythmbox-metadata process constantly fills ALL of the memory, then drops to 1% until killed

[dan_g]

I experienced this today on a pretty fresh install of 12.10 64-bit. It
became problematic when I ran VirtualBox (with lots of memory
requirements).

I Manually killed all Rhythmbox processes.
I was listening to the "Radio" stations.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to rhythmbox in Ubuntu.
https://bugs.launchpad.net/bugs/1080041

Title:
  rhythmbox-metadata process constantly fills ALL of the memory, then
  drops to 1% until killed

Status in The Rhythmbox Music Management Application:
  New
Status in “rhythmbox” package in Ubuntu:
  Confirmed

Bug description:
  When first started, rhythmbox's rhythmbox-metadata process tends to
  grab all available memory (up to 1.1 GB) for a few seconds, then
  releases everything for a while. Then it slowly creeps up to 1.1 GB
  again. This repeats indefinitely until I manually kill the offending
  process, at which point it respawns, although no longer taking up more
  than 10 MB.

  System:
  Ubuntu 12.10 with all updates installed; 64-bit

  $ apt-cache policy rhythmbox
  rhythmbox:
Installed: 2.97-1ubuntu5
Candidate: 2.97-1ubuntu5
Version table:
   *** 2.97-1ubuntu5 0
  500 http://archive.ubuntu.com/ubuntu/ quantal/main amd64 Packages
  100 /var/lib/dpkg/status

To manage notifications about this bug go to:
https://bugs.launchpad.net/rhythmbox/+bug/1080041/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1080041] Re: rhythmbox-metadata process constantly fills ALL of the memory, then drops to 1% until killed

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: rhythmbox (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to rhythmbox in Ubuntu.
https://bugs.launchpad.net/bugs/1080041

Title:
  rhythmbox-metadata process constantly fills ALL of the memory, then
  drops to 1% until killed

Status in The Rhythmbox Music Management Application:
  New
Status in “rhythmbox” package in Ubuntu:
  Confirmed

Bug description:
  When first started, rhythmbox's rhythmbox-metadata process tends to
  grab all available memory (up to 1.1 GB) for a few seconds, then
  releases everything for a while. Then it slowly creeps up to 1.1 GB
  again. This repeats indefinitely until I manually kill the offending
  process, at which point it respawns, although no longer taking up more
  than 10 MB.

  System:
  Ubuntu 12.10 with all updates installed; 64-bit

  $ apt-cache policy rhythmbox
  rhythmbox:
Installed: 2.97-1ubuntu5
Candidate: 2.97-1ubuntu5
Version table:
   *** 2.97-1ubuntu5 0
  500 http://archive.ubuntu.com/ubuntu/ quantal/main amd64 Packages
  100 /var/lib/dpkg/status

To manage notifications about this bug go to:
https://bugs.launchpad.net/rhythmbox/+bug/1080041/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 950160] Re: Unity blocks other programs from binding globally to Super+* (* = any key)

[Nicolay Doytchev]

Is there any way to programatically invoke the dash from an application?
If yes, where can I find information about it?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/950160

Title:
  Unity blocks other programs from binding globally to Super+* (* = any
  key)

Status in Compiz:
  Fix Committed
Status in Compiz 0.9.8 series:
  In Progress
Status in Compiz Core:
  Confirmed
Status in Gnome Settings Daemon:
  Fix Released
Status in OEM Priority Project:
  In Progress
Status in OEM Priority Project precise series:
  In Progress
Status in Unity:
  Fix Committed
Status in Unity 5.0 series:
  Triaged
Status in Unity 6.0 series:
  In Progress
Status in “compiz” package in Ubuntu:
  Fix Committed
Status in “gnome-settings-daemon” package in Ubuntu:
  Fix Released
Status in “unity” package in Ubuntu:
  In Progress
Status in “compiz” source package in Precise:
  Triaged
Status in “gnome-settings-daemon” source package in Precise:
  Fix Released
Status in “unity” source package in Precise:
  Triaged
Status in “compiz” source package in Quantal:
  Triaged
Status in “gnome-settings-daemon” source package in Quantal:
  Fix Released
Status in “unity” source package in Quantal:
  In Progress

Bug description:
  WORKAROUND 1:
  Run CCSM and under "Ubuntu Unity Plugin" change the key binding for "Key to 
show the launcher" to something else (e.g. Super+U). Then log out and in again. 
As long as no compiz plugin is bound to the single Super key any more, compiz 
will no longer block other apps from binding to Super+other_keys.

  WORKAROUND 2:
  1. Write a script or figure out the command to do the action you want.
  2. Run ccsm.
  3. Enable the "Commands" plugin
  4. In the Commands settings, fill in the command line you want and bind it to 
key Super+P.
  Now Unity will run your specified command on Super+P, but still handle the 
Super key as usual.

  [Precise SRU Justification]

  [Impact] Any shortcut with Super, Hyper, Meta virtual modifiers does
  not work

  [Test Case] Attach an external monitor to the laptop, press Super+P,
  it should do the video switch as this function is implemented in
  gnome-settings-daemon.  A patch in comment #12 is now accepted
  upstream and a test package with that patch is available in comment
  #14. From the test result, the patch at least fixes Unity-2D.

  [Regression Potential] The patch is accepted upstream and is also
  cherry-picked in the gnome-3-4 branch of g-s-d git tree. g-s-d version
  in Precise is 3.4.2.  So the risk of regression should be rather low.

  [Other] I prepare a debdiff in comment #31 for convenience. I hope the
  patch can be in both Quantal and Precise.

  ORIGINAL DESCRIPTION:
  Using : 12.04 Beta 1, updated. and Unity.

  In 11.10 clicking:

  - the function key (Fn) + (F1) allowed to switch between the laptop
  screen and the external monitor.

  After upgrading to 12.04 this no more works and instead I get an
  unexpected behavior: see the video.

  https://www.youtube.com/watch?v=-vEnrV5TwXo

  System: Dell XPS 15 L502X

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: ubuntu-sso-client 2.99.90-0ubuntu2
  ProcVersionSignature: Ubuntu 3.2.0-18.28-generic 3.2.9
  Uname: Linux 3.2.0-18-generic x86_64
  ApportVersion: 1.94.1-0ubuntu1
  Architecture: amd64
  Date: Thu Mar  8 19:18:42 2012
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
  PackageArchitecture: all
  SourcePackage: ubuntu-sso-client
  UpgradeStatus: Upgraded to precise on 2012-03-02 (6 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/compiz/+bug/950160/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 985119] Re: [soundnua]: doesn't offer 'Analogue stereo Output' option

[Raymond]

https://wiki.ubuntu.com/Audio/AlsaInfo

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/985119

Title:
  [soundnua]: doesn't offer 'Analogue stereo  Output' option

Status in “gnome-control-center” package in Ubuntu:
  Confirmed
Status in “pulseaudio” package in Ubuntu:
  Confirmed

Bug description:
  Ubuntu 12.04 beta2 updated to date
  In three different machines:
  Play 'Examples' audio files, or play  bbc radio  live streams, and click 
Record button in Sound Recorder.
  No audio is recorded. There are signs that static 'noise' is recorded only.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gnome-media 3.4.0-0ubuntu2
  ProcVersionSignature: Ubuntu 3.2.0-23.36-generic-pae 3.2.14
  Uname: Linux 3.2.0-23-generic-pae i686
  ApportVersion: 2.0.1-0ubuntu4
  Architecture: i386
  Date: Wed Apr 18 18:54:56 2012
  ExecutablePath: /usr/bin/gnome-sound-recorder
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta i386 (20120328)
  ProcEnviron:
   LANGUAGE=en_GB:en
   PATH=(custom, no username)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-media
  UpgradeStatus: No upgrade log present (probably fresh install)
  XsessionErrors:
   (gnome-settings-daemon:1665): color-plugin-WARNING **: failed to get 
contents of /sys/class/dmi/id/chassis_vendor: Failed to open file 
'/sys/class/dmi/id/chassis_vendor': No such file or directory
   (awn-applet:1776): Gdk-WARNING **: XID collision, trouble ahead

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/985119/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 969359] Re: [keyboard]: gnome-settings-daemon consumes 100% cpu (and blinking numlock)

[Launchpad Bug Tracker]

This bug was fixed in the package gnome-settings-daemon -
3.4.2-0ubuntu0.6

---
gnome-settings-daemon (3.4.2-0ubuntu0.6) precise-proposed; urgency=low

  * debian/patches/git_no_numlock_eating_cpu_loop.patch:
- backport upstream fix for "numlock keeps changing state and
  gnome-settings-daemon is eating 100% cpu while that's happening"
  (lp: #969359)
 -- Sebastien BacherMon, 12 Nov 2012 16:09:01 +0100

** Changed in: gnome-settings-daemon (Ubuntu Precise)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/969359

Title:
  [keyboard]: gnome-settings-daemon consumes 100% cpu (and blinking
  numlock)

Status in Gnome Settings Daemon:
  Fix Released
Status in “gnome-settings-daemon” package in Ubuntu:
  Fix Released
Status in “gnome-settings-daemon” source package in Precise:
  Fix Released
Status in “gnome-settings-daemon” source package in Quantal:
  Fix Committed
Status in “gnome-settings-daemon” package in Fedora:
  Unknown

Bug description:
  Impact:
  gnome-settings-daemon uses 100% cpu for ever in some cases

  Test Case:
  Seems to happen sometimes after docking or connecting with vnc, try to 
connect to the machine using a vnc client a few times and check there is no 
numlock cycle and cpu usage loop starting

  Regression potential:
  The numlock state could be wrongly set,restored on login in some cases

  -

  Original message:
  -

  I don't know how to reproduce this bug, but after varying amounts of
  normal usage of my laptop, I notice gnome-settings-daemon is consuming
  100% (approx) CPU.

  I am not sure how to restart gnome-settings-daemon, I tried opening a
  terminal and running gnome-settings-daemon again but this crashes my
  system - my external monitor switches off and my laptop locks up. I am
  able to reboot with SysRq+REISUB.

  Sorry I cannot provide more information - it happens twice now, maybe
  someone can tell me how to get more information for the next time this
  happens.

  $ lsb_release -rd
  Description:  Ubuntu precise (development branch)
  Release:  12.04

  $ apt-cache policy gnome-settings-daemon
  gnome-settings-daemon:
    Installed: 3.4.0-0ubuntu2
    Candidate: 3.4.0-0ubuntu2
    Version table:
   *** 3.4.0-0ubuntu2 0
  500 http://gb.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages
  100 /var/lib/dpkg/status

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gnome-settings-daemon 3.4.0-0ubuntu2
  ProcVersionSignature: Ubuntu 3.2.0-20.33-generic 3.2.12
  Uname: Linux 3.2.0-20-generic x86_64
  ApportVersion: 1.95-0ubuntu1
  Architecture: amd64
  Date: Fri Mar 30 17:16:02 2012
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120301)
  ProcEnviron:
   LANGUAGE=en_GB:en
   TERM=xterm
   PATH=(custom, user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-settings-daemon
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-settings-daemon/+bug/969359/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1086089] Re: Blank screen after upgrading kubuntu from 12.04 to 12.10

[Logan Rosen]

I'm assigning this to the xorg package, as this appears to be a problem
with X.Org. Could you please run "apport-collect 1086089" again so that
the developers can have more information to triage your bug?

** Tags removed: upgrade-software-version

** Package changed: kubuntu-active-meta (Ubuntu) => xorg (Ubuntu)

** Changed in: xorg (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1086089

Title:
  Blank screen after upgrading kubuntu from 12.04 to 12.10

Status in “xorg” package in Ubuntu:
  Incomplete

Bug description:
  After upgrading kubuntu from 12.04 to 12.10, after logging in, I am
  left with a blank screen and an X-shaped cursor.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1086089/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1090028] Re: USB microphone disappears when Skype call starts and reappears when it ends

[Raymond]

19850.867150] compat_ioctl32: unknown ioctl 'v', dir=2, #1 (0x803c7601)
[22211.236304] usb 1-5: USB disconnect, device number 4
[22211.486418] usb 1-5: new high-speed USB device number 5 using ehci_hcd
[22211.661789] usb 1-5: New USB device found, idVendor=0ac8, idProduct=3420
[22211.661797] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[22211.661802] usb 1-5: Product: Venus USB2.0 Camera
[22211.661806] usb 1-5: Manufacturer: Vimicro Corp.
[22211.662967] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3420)
[22211.664981] input: Venus USB2.0 Camera as 
/devices/pci:00/:00:12.2/usb1/1-5/1-5:1.0/input/input17
[22285.105917] retire_capture_urb: 54 callbacks suppressed
[28051.135709] compat_ioctl32: unknown ioctl 'v', dir=2, #1 (0x803c7601)
[28261.538639] compat_ioctl32: unknown ioctl 'v', dir=2, #1 (0x803c7601)
[33839.221313] usb 1-5: USB disconnect, device number 5
[33839.481667] usb 1-5: new high-speed USB device number 6 using ehci_hcd
[33839.657092] usb 1-5: New USB device found, idVendor=0ac8, idProduct=3420
[33839.657101] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[33839.657107] usb 1-5: Product: Venus USB2.0 Camera
[33839.657135] usb 1-5: Manufacturer: Vimicro Corp.
[33839.658522] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3420)
[33839.660859] input: Venus USB2.0 Camera as 
/devices/pci:00/:00:12.2/usb1/1-5/1-5:1.0/input/input18
[33935.303381] usb 1-5: USB disconnect, device number 6
[33935.568208] usb 1-5: new high-speed USB device number 7 using ehci_hcd
[33935.765392] usb 1-5: New USB device found, idVendor=0ac8, idProduct=3420
[33935.765400] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[33935.765405] usb 1-5: Product: Venus USB2.0 Camera
[33935.773617] usb 1-5: can't set config #1, error -71
[33935.773693] usb 1-5: USB disconnect, device number 7
[33936.014892] usb 1-5: new high-speed USB device number 8 using ehci_hcd
[33936.190420] usb 1-5: New USB device found, idVendor=0ac8, idProduct=3420
[33936.190430] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[33936.190436] usb 1-5: Product: Venus USB2.0 Camera
[33936.190441] usb 1-5: Manufacturer: Vimicro Corp.
[33936.191605] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3420)
[33936.193609] input: Venus USB2.0 Camera as 
/devices/pci:00/:00:12.2/usb1/1-5/1-5:1.0/input/input19


Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-_00_14.2.analog-stereo
Default source name: alsa_input.pci-_00_14.2.analog-stereo


ports:
analog-input-microphone-front: Front Microphone (priority 8500, 
available: no)
properties:

analog-input-microphone-rear: Rear Microphone (priority 8200, 
available: no)
properties:

analog-input-linein: Line In (priority 8100, available: no)
properties:

active port: 


** Package changed: pulseaudio (Ubuntu) => alsa-driver (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1090028

Title:
  USB microphone disappears when Skype call starts and reappears when it
  ends

Status in “alsa-driver” package in Ubuntu:
  New

Bug description:
  Dear friends,

  I've a USB microphone, which just when a Skype call begins, it just
  disappears from the input selection. When the Skype call ends, it
  returns.

  Thanks,
  Shahar

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: pulseaudio 1:2.1-0ubuntu4
  ProcVersionSignature: Ubuntu 3.7.0-5.13-generic 3.7.0-rc8
  Uname: Linux 3.7.0-5-generic x86_64
  ApportVersion: 2.7-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC2:  shahar 2549 F pulseaudio
   /dev/snd/controlC0:  shahar 2549 F pulseaudio
   /dev/snd/pcmC0D0p:   shahar 2549 F...m pulseaudio
  Date: Thu Dec 13 18:42:13 2012
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2010-10-12 (793 days ago)
  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
  MarkForUpload: True
  SourcePackage: pulseaudio
  UpgradeStatus: Upgraded to raring on 2012-11-07 (35 days ago)
  dmi.bios.date: 12/06/2011
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F4c
  dmi.board.name: GA-880GMA-USB3
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: 
dmi:bvnAwardSoftwareInternational,Inc.:bvrF4c:bd12/06/2011:svnGigabyteTechnologyCo.,Ltd.:pnGA-880GMA-USB3:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-880GMA-USB3:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: GA-880GMA-USB3
  dmi.

[Desktop-packages] [Bug 1090111] [NEW] HDMI reports resolution mismatch on changing users

[teledyn]

Public bug reported:

I may need some help gathering necessary information for this as I am
not sure what component will be affected, I'm only guessing it is nvidea
as that is the video module loaded.

symptom: on changing users, only sometimes, the HDMI connected screen
goes blank and the monitor hardware reports a resolution mismatch.
Restarting X does not fix the problem, the only solution I've found is a
hardware reboot.  The monitor itself only has one resolution so it
cannot be adjusted.

this is a new problem, only since upgrading to 11.10 and persists in
12.04.1

xorg.conf:

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName  "FNI LCD TV"
HorizSync   15.0 - 49.0
VertRefresh 57.0 - 63.0
Option "DPMS"
# HorizSync source: edid, VertRefresh source: edid
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor"Monitor0"
DefaultDepth24
Option "TwinView" "0"
Option "metamodes" "1280x768 +0+0"
SubSection "Display"
Depth   24
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Layout0"
Screen  0  "Screen0" 0 0
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#   InputDevice"Keyboard0" "CoreKeyboard"
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#   InputDevice"Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName  "GeForce GT 220"
Option  "NoLogo""True"
EndSection

Xorg.0.log report:

everything looks normal booting up

[46.951] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[46.951] (==) NVIDIA(0): RGB weight 888
[46.951] (==) NVIDIA(0): Default visual is TrueColor
[46.951] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[46.951] (**) NVIDIA(0): Option "NoLogo" "True"
[46.951] (**) NVIDIA(0): Option "TwinView" "0"
[46.951] (**) NVIDIA(0): Option "MetaModes" "1280x768 +0+0"
[46.951] (**) NVIDIA(0): Enabling 2D acceleration
[48.517] (II) NVIDIA(GPU-0): Display (FNI LCD TV (DFP-0)) does not support N
VIDIA 3D Vision
[48.517] (II) NVIDIA(GPU-0): stereo.
[48.519] (II) NVIDIA(0): NVIDIA GPU GeForce GT 220 (GT216) at PCI:2:0:0 (GPU
-0)
[48.519] (--) NVIDIA(0): Memory: 1048576 kBytes
[48.519] (--) NVIDIA(0): VideoBIOS: 70.16.28.00.00
[48.519] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[48.519] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[48.521] (--) NVIDIA(0): Connected display device(s) on GeForce GT 220 at PC
I:2:0:0
[48.521] (--) NVIDIA(0): FNI LCD TV (DFP-0)
[48.521] (--) NVIDIA(0): FNI LCD TV (DFP-0): 330.0 MHz maximum pixel clock
[48.521] (--) NVIDIA(0): FNI LCD TV (DFP-0): Internal Dual Link TMDS
[48.556] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID fo
r display
[48.556] (**) NVIDIA(0): device FNI LCD TV (DFP-0) (Using EDID frequenci
es has been
[48.556] (**) NVIDIA(0): enabled on all display devices.)
[48.617] (II) NVIDIA(0): Assigned Display Device: DFP-0
[48.617] (II) NVIDIA(0): Validated modes:
[48.617] (II) NVIDIA(0): "1280x768+0+0"
[48.617] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 768
[48.654] (WW) NVIDIA(0): FNI LCD TV (DFP-0)'s EDID does not contain a maximu
m image
[48.654] (WW) NVIDIA(0): size; cannot compute DPI from FNI LCD TV (DFP-0
)'s EDID.
[48.654] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[48.654] (--) Depth 24 pixmap format is 32 bpp
[48.654] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory 
access.
[48.661] (II) NVIDIA(0): Setting mode "1280x768+0+0"

the log ends with

[ 75437.139] (II) Open ACPI successful (/var/run/acpid.socket)
[ 75440.267] (II) NVIDIA(0): Setting mode "1280x768+0+0"
[ 75442.267] (EE) NVIDIA(GPU-0): WAIT: (E, 0, 0x857d)

which is the same resolution

let me know if there are further tests or logs that might be useful

** Affects: nvidia-graphics-drivers (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers in Ubuntu.
https://bugs.launchpad.net/bugs/1090111

Title:
  HDMI reports resolution mismatch on changing users

Status in “nvidia-graphics-drivers” package in Ubuntu:
  New

Bug description:
  I may need some help gathering necessary information for this as I am
  not sure what component will be affected, I'm

[Desktop-packages] [Bug 888401] Re: On Kubuntu, doesn't display any screenshots - just shows "no screenshot"

[Launchpad Bug Tracker]

This bug was fixed in the package software-center - 5.5.2.1

---
software-center (5.5.2.1) raring; urgency=low

  * lp:~mvo/software-center/lp1081691:
- add set X-Unity-IconBackgroundColor=#ffbf87 (LP: #1081691)
  * lp:~mvo/software-center/add-missing-dependency-lp888401:
- add missing dependency on gvfs-backends to get working
  screenshots support (LP: #888401) on systems like kubuntu
  * fix tests in the ADT environment
 -- Michael VogtThu, 13 Dec 2012 21:05:58 +0100

** Changed in: software-center (Ubuntu)
   Status: Confirmed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/888401

Title:
  On Kubuntu, doesn't display any screenshots - just shows "no
  screenshot"

Status in “software-center” package in Ubuntu:
  Fix Released

Bug description:
  Doesn't display any screen shots - just shows "no screenshot"

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: software-center 5.0.2
  ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4
  Uname: Linux 3.0.0-12-generic x86_64
  NonfreeKernelModules: fglrx
  ApportVersion: 1.23-0ubuntu4
  Architecture: amd64
  Date: Thu Nov 10 12:36:38 2011
  InstallationMedia: Kubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100427)
  PackageArchitecture: all
  ProcEnviron:
   LANG=en_US.UTF-8
   SHELL=/bin/zsh
  SourcePackage: software-center
  UpgradeStatus: Upgraded to oneiric on 2011-10-17 (24 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/888401/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1081691] Re: Launcher - Update the icons used for the Software Centre, Nautilus, and Software Updater

[Launchpad Bug Tracker]

This bug was fixed in the package software-center - 5.5.2.1

---
software-center (5.5.2.1) raring; urgency=low

  * lp:~mvo/software-center/lp1081691:
- add set X-Unity-IconBackgroundColor=#ffbf87 (LP: #1081691)
  * lp:~mvo/software-center/add-missing-dependency-lp888401:
- add missing dependency on gvfs-backends to get working
  screenshots support (LP: #888401) on systems like kubuntu
  * fix tests in the ADT environment
 -- Michael VogtThu, 13 Dec 2012 21:05:58 +0100

** Changed in: software-center (Ubuntu)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to software-center in Ubuntu.
https://bugs.launchpad.net/bugs/1081691

Title:
  Launcher - Update the icons used for the Software Centre, Nautilus,
  and Software Updater

Status in Ayatana Design:
  Fix Committed
Status in Unity:
  Won't Fix
Status in “nautilus” package in Ubuntu:
  Incomplete
Status in “software-center” package in Ubuntu:
  Fix Released
Status in “ubuntu-mono” package in Ubuntu:
  Triaged
Status in “update-manager” package in Ubuntu:
  Confirmed

Bug description:
  Update the icons used for the Software Centre, Nautilus, and Software
  Updater to the new icons supplied in the attached file
  "Nautilus_USC_Updater_new_icons.zip".

  When any of these three applications are running, the Launcher tiles they are 
mounted on should be illuminated in the following colours:
  Nautilus: #af4853
  Software center: #ffbf87
  Software updater: #4c9e39

  (Note this functionality was added to the Launcher in Unity 6.0 as a
  result of bug #962120)

  So, packages shipping Nautilus, Software Center and Software updater
  should define in their .desktop file the proper X-Unity-
  IconBackgroundColor field with the mentioned colors.

  

  This change is part of a larger set of Launcher icon changes, see
  attached image "preview-new-launcher-icons.png" for how the launcher
  will appear when the full set of changes are made.

  The other bugs that are part of this same change request are:

  bug #1081704 (Dash - update the 'App Lens' icon asset in the Dash bottom lens 
nav bar)
  bug #1081702 (Update the default wallpaper in 13.04)
  bug #838854 (Workspaces, Launcher - The workspace Launcher icon should change 
depending on which workspace is currently being utilised)
  bug #1081697 (Launcher - Update BFB icon to use a new special asset)
  bug #1081687 (Launcher - Update Launcher tile assets)
  bug #1081691 (Launcher - Update the icons used for the Software Centre, 
Nautilus, and Software Updater)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ayatana-design/+bug/1081691/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1086783] Re: New PolicyKit 0.106 changes configuration file format

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: policykit-1 (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to policykit-1 in Ubuntu.
https://bugs.launchpad.net/bugs/1086783

Title:
  New PolicyKit 0.106 changes configuration file format

Status in “policykit-1” package in Ubuntu:
  Confirmed
Status in “policykit-1” package in Debian:
  Unknown

Bug description:
  From the NEWS file:

  This is polkit 0.106. There's a major change in this release which is
  a switch from .pkla files (keyfile-format) to .rules files
  (JavaScript).

  We may want to hold off on the new version because it requires
  rewriting the configuration files, and adds a dependency on mozjs185,
  which will need a MIR (and getting a MIR may be problematic)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/policykit-1/+bug/1086783/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1086783] Re: New PolicyKit 0.106 changes configuration file format

[Logan Rosen]

** Bug watch added: Debian Bug tracker #689473
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=689473

** Also affects: policykit-1 (Debian) via
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=689473
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to policykit-1 in Ubuntu.
https://bugs.launchpad.net/bugs/1086783

Title:
  New PolicyKit 0.106 changes configuration file format

Status in “policykit-1” package in Ubuntu:
  Confirmed
Status in “policykit-1” package in Debian:
  Unknown

Bug description:
  From the NEWS file:

  This is polkit 0.106. There's a major change in this release which is
  a switch from .pkla files (keyfile-format) to .rules files
  (JavaScript).

  We may want to hold off on the new version because it requires
  rewriting the configuration files, and adds a dependency on mozjs185,
  which will need a MIR (and getting a MIR may be problematic)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/policykit-1/+bug/1086783/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1086089] [NEW] Blank screen after upgrading kubuntu from 12.04 to 12.10

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

After upgrading kubuntu from 12.04 to 12.10, after logging in, I am left
with a blank screen and an X-shaped cursor.

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New

-- 
Blank screen after upgrading kubuntu from 12.04 to 12.10
https://bugs.launchpad.net/bugs/1086089
You received this bug notification because you are a member of Desktop 
Packages, which is subscribed to xorg in Ubuntu.

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 969359] Re: [keyboard]: gnome-settings-daemon consumes 100% cpu (and blinking numlock)

[Brian Murray]

** Tags added: verification-done-precise

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/969359

Title:
  [keyboard]: gnome-settings-daemon consumes 100% cpu (and blinking
  numlock)

Status in Gnome Settings Daemon:
  Fix Released
Status in “gnome-settings-daemon” package in Ubuntu:
  Fix Released
Status in “gnome-settings-daemon” source package in Precise:
  Fix Committed
Status in “gnome-settings-daemon” source package in Quantal:
  Fix Committed
Status in “gnome-settings-daemon” package in Fedora:
  Unknown

Bug description:
  Impact:
  gnome-settings-daemon uses 100% cpu for ever in some cases

  Test Case:
  Seems to happen sometimes after docking or connecting with vnc, try to 
connect to the machine using a vnc client a few times and check there is no 
numlock cycle and cpu usage loop starting

  Regression potential:
  The numlock state could be wrongly set,restored on login in some cases

  -

  Original message:
  -

  I don't know how to reproduce this bug, but after varying amounts of
  normal usage of my laptop, I notice gnome-settings-daemon is consuming
  100% (approx) CPU.

  I am not sure how to restart gnome-settings-daemon, I tried opening a
  terminal and running gnome-settings-daemon again but this crashes my
  system - my external monitor switches off and my laptop locks up. I am
  able to reboot with SysRq+REISUB.

  Sorry I cannot provide more information - it happens twice now, maybe
  someone can tell me how to get more information for the next time this
  happens.

  $ lsb_release -rd
  Description:  Ubuntu precise (development branch)
  Release:  12.04

  $ apt-cache policy gnome-settings-daemon
  gnome-settings-daemon:
    Installed: 3.4.0-0ubuntu2
    Candidate: 3.4.0-0ubuntu2
    Version table:
   *** 3.4.0-0ubuntu2 0
  500 http://gb.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages
  100 /var/lib/dpkg/status

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gnome-settings-daemon 3.4.0-0ubuntu2
  ProcVersionSignature: Ubuntu 3.2.0-20.33-generic 3.2.12
  Uname: Linux 3.2.0-20-generic x86_64
  ApportVersion: 1.95-0ubuntu1
  Architecture: amd64
  Date: Fri Mar 30 17:16:02 2012
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120301)
  ProcEnviron:
   LANGUAGE=en_GB:en
   TERM=xterm
   PATH=(custom, user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-settings-daemon
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-settings-daemon/+bug/969359/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 795765] Re: CDs won't resume playing after being paused

[Launchpad Bug Tracker]

This bug was fixed in the package rhythmbox - 2.97-1ubuntu6.1

---
rhythmbox (2.97-1ubuntu6.1) quantal-proposed; urgency=low

  * debian/patches/git_rhythmdb_fix_deadlock.patch:
- Backported git patch to fix deadlock between db load and
  rhythmdb_add_uri_with_types: (LP: #1010619)
  * Updated 11_fix_cd_pausing.patch with fix from git (LP: #795765)
 -- Matthieu Baerts (matttbe)Wed, 07 Nov 2012 17:26:55 
+0100

** Changed in: rhythmbox (Ubuntu Quantal)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to rhythmbox in Ubuntu.
https://bugs.launchpad.net/bugs/795765

Title:
  CDs won't resume playing after being paused

Status in OEM Priority Project:
  In Progress
Status in OEM Priority Project precise series:
  In Progress
Status in OEM Priority Project quantal series:
  In Progress
Status in The Rhythmbox Music Management Application:
  Fix Released
Status in “rhythmbox” package in Ubuntu:
  Fix Released
Status in “rhythmbox” source package in Precise:
  Triaged
Status in “rhythmbox” source package in Quantal:
  Fix Released

Bug description:
  [IMPACT]

   * Rhythmbox won't resume playing an audio CD if you pause it.

  [TESTCASE]

   * Insert an audio CD (not an mp3 CD but a traditional one you'd buy from the 
music store)
   * Test if play and pause work.

  [Regression Potential]

  * None, audio CD playback is already very badly broken.

  
  [ Original Bug Report ]

  Start a music track playing in a usual way, such as highlighting a
  track and pressing the play/pause button or double LMB clicking on a
  track. The play/pause button icon changes to a pause icon.

  If the play/pause button is pressed the button changes to a play
  button but has no effect on the track playing. The title bar of
  Rhythmbox then has "(Paused") displayed after the artist and track
  details.

  If the play/pause button is pressed again it "goes in and comes out"
  but stays as a play button and the track carries on playing. A "pause"
  icon is displayed in the left "speaker icon" column in the track list
  next to the track that has been paused. The only way to stop the track
  playing is to "Quit" Rhythmbox.

  The next and previous track buttons do work correctly on a playing
  track, if the pause/play button is not pressed first. Also the slider
  that indicates how the progress of track can be moved left or right
  and everything behaves as expected. It is just that there is no way to
  pause/stop a playing track.

  The same behaviour happens if either the buttons on the top menu bar
  are used, or the laptop "hot key" buttons.

  If a second track is double LMB clicked to start (after a previous
  track has tried to be paused) the second track starts to play with the
  first one still playing as well. The play/pause button turns back to a
  pause button again. If the play/pause button is pressed the same
  behaviour is observed it turns to a play button, the menu bar displays
  "(Paused)" and the track carries on playing. This process can be
  repeated so that you have multiple tracks all playing and non being
  able to be paused/stop. Also using the previous/next track buttons,
  after one has tried to pause a track, causes a new track to start
  playing. A quit is the only control you seem to have to stop music
  playing.

  I have also started rhythmbox from a terminal in debug mode using:
  rhythmbox -d 2&> rhythmbox_debug.txt
  and started track tried to pause it, used previous/next buttons, pressed 
play/pause again etc, so multiple tracks were playing.

  I have attached this output to this report.

  If I open the same folder of music (mp3 files) in VLC I can play/pause
  the music, previous/next buttons work ok.

  I have also tried Ubuntu 11.04 from the live CD, where Banshee is the
  default music player. I seemed to get the same behaviour with
  play/pause (ie not working) as I did with rhythmbox in 10.10.

  $ lsb_release -rd
  Description:  Ubuntu 10.10
  Release:  10.10

  $ apt-cache policy rhythmbox
  rhythmbox:
    Installed: 0.13.1-0ubuntu6.1
    Candidate: 0.13.1-0ubuntu6.1
    Version table:
   *** 0.13.1-0ubuntu6.1 0
  500 http://gb.archive.ubuntu.com/ubuntu/ maverick-updates/main i386 
Packages
  100 /var/lib/dpkg/status
   0.13.1-0ubuntu5 0
  500 http://gb.archive.ubuntu.com/ubuntu/ maverick/main i386 Packages

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: rhythmbox 0.13.1-0ubuntu6.1
  ProcVersionSignature: Ubuntu 2.6.35-28.50-generic-pae 2.6.35.11
  Uname: Linux 2.6.35-28-generic-pae i686
  Architecture: i386
  Date: Fri Jun 10 22:41:02 2011
  EcryptfsInUse: Yes
  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007)
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_GB.utf8
   SHELL=/bin/bash
  SourcePackage: rhythmbox

To manage notifications about this bug go to:
https://bugs.launchpad.net/oem-prio

[Desktop-packages] [Bug 1010619] Re: [SRU] Rhythmbox 2.97 and 2.98 freezes with large collection

[Launchpad Bug Tracker]

This bug was fixed in the package rhythmbox - 2.97-1ubuntu6.1

---
rhythmbox (2.97-1ubuntu6.1) quantal-proposed; urgency=low

  * debian/patches/git_rhythmdb_fix_deadlock.patch:
- Backported git patch to fix deadlock between db load and
  rhythmdb_add_uri_with_types: (LP: #1010619)
  * Updated 11_fix_cd_pausing.patch with fix from git (LP: #795765)
 -- Matthieu Baerts (matttbe)Wed, 07 Nov 2012 17:26:55 
+0100

** Changed in: rhythmbox (Ubuntu Quantal)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to rhythmbox in Ubuntu.
https://bugs.launchpad.net/bugs/1010619

Title:
  [SRU] Rhythmbox 2.97 and 2.98 freezes with large collection

Status in The Rhythmbox Music Management Application:
  Fix Released
Status in “rhythmbox” package in Ubuntu:
  Fix Released
Status in “rhythmbox” source package in Quantal:
  Fix Released
Status in “rhythmbox” source package in Raring:
  Fix Released

Bug description:
  [IMPACT]

   * Rhythmbox freezes when using a large collection.

  [TESTCASE]

   * It happens with a large collection.
   * It's due to a deadlock between db load and rhythmdb_add_uri_with_types and 
it's possible that it's not easy to reproduce this bug. Maybe it can be 
interesting to slow down the hard disk (e.g. by copying a large file when 
opening Rhythmbox with a lot of files in its collection)
   * After a few seconds, Rhythmbox will freeze.
   * (this fix has been confirmed by a few people here above.)

  [Regression Potential]

  * According to RB devs: None => 
http://git.gnome.org/browse/rhythmbox/commit/?id=a2ead52faa45a37f28dff1e94cad5f0dadd28129
  * This deadlock has been fixed by RB devs and now it seems they understand 
why there was a deadlock

  [ Other Info ]

  * Raring: A new version (2.98-0ubuntu2) has been uploaded to Raring repos
  * Quantal: This BZR branch contains a fix for this bug: 
lp:~matttbe/ubuntu/quantal/rhythmbox/1010619_795765 (it also contains the 
latest version of '11_fix_cd_pausing.patch' (patch from upstream and also 
available in Raring) linked to the bug: #795765)
For more details about this branch, please have a look at this merge 
request: 
https://code.launchpad.net/~matttbe/ubuntu/quantal/rhythmbox/1010619_795765/+merge/133343


  [ Original Bug Report ]

  Hello,

  With the latest version of RB 2.97-0ubuntu2, the interface freezes at launch.
  I didn't have this bug with the previous version 2.97-0ubuntu1 but it's a bit 
strange because it seems the change between the two versions only concerns 
'audiocd' plugin (and I have this bug with or without this plugin)

  If I launch it with this command, I don't have any problem:
    $ rhythmbox --rhythmdb-file=test.db

  Maybe my (huge) database is corrupted but if I launch RB with the
  debug mode (-d), I don't have this bug (but it takes a few time before
  being ready to use).

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: rhythmbox 2.97-0ubuntu2
  ProcVersionSignature: Ubuntu 3.4.0-5.11-generic 3.4.0
  Uname: Linux 3.4.0-5-generic x86_64
  ApportVersion: 2.1.1-0ubuntu2
  Architecture: amd64
  Date: Fri Jun  8 20:34:40 2012
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Alpha amd64 (20110803.1)
  SourcePackage: rhythmbox
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/rhythmbox/+bug/1010619/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 795765] Update Released

[Brian Murray]

The verification of this Stable Release Update has completed
successfully and the package has now been released to -updates.
Subsequently, the Ubuntu Stable Release Updates Team is being
unsubscribed and will not receive messages about this bug report.  In
the event that you encounter a regression using the package from
-updates please report a new bug using ubuntu-bug and tag the bug report
regression-update so we can easily find any regresssions.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to rhythmbox in Ubuntu.
https://bugs.launchpad.net/bugs/795765

Title:
  CDs won't resume playing after being paused

Status in OEM Priority Project:
  In Progress
Status in OEM Priority Project precise series:
  In Progress
Status in OEM Priority Project quantal series:
  In Progress
Status in The Rhythmbox Music Management Application:
  Fix Released
Status in “rhythmbox” package in Ubuntu:
  Fix Released
Status in “rhythmbox” source package in Precise:
  Triaged
Status in “rhythmbox” source package in Quantal:
  Fix Released

Bug description:
  [IMPACT]

   * Rhythmbox won't resume playing an audio CD if you pause it.

  [TESTCASE]

   * Insert an audio CD (not an mp3 CD but a traditional one you'd buy from the 
music store)
   * Test if play and pause work.

  [Regression Potential]

  * None, audio CD playback is already very badly broken.

  
  [ Original Bug Report ]

  Start a music track playing in a usual way, such as highlighting a
  track and pressing the play/pause button or double LMB clicking on a
  track. The play/pause button icon changes to a pause icon.

  If the play/pause button is pressed the button changes to a play
  button but has no effect on the track playing. The title bar of
  Rhythmbox then has "(Paused") displayed after the artist and track
  details.

  If the play/pause button is pressed again it "goes in and comes out"
  but stays as a play button and the track carries on playing. A "pause"
  icon is displayed in the left "speaker icon" column in the track list
  next to the track that has been paused. The only way to stop the track
  playing is to "Quit" Rhythmbox.

  The next and previous track buttons do work correctly on a playing
  track, if the pause/play button is not pressed first. Also the slider
  that indicates how the progress of track can be moved left or right
  and everything behaves as expected. It is just that there is no way to
  pause/stop a playing track.

  The same behaviour happens if either the buttons on the top menu bar
  are used, or the laptop "hot key" buttons.

  If a second track is double LMB clicked to start (after a previous
  track has tried to be paused) the second track starts to play with the
  first one still playing as well. The play/pause button turns back to a
  pause button again. If the play/pause button is pressed the same
  behaviour is observed it turns to a play button, the menu bar displays
  "(Paused)" and the track carries on playing. This process can be
  repeated so that you have multiple tracks all playing and non being
  able to be paused/stop. Also using the previous/next track buttons,
  after one has tried to pause a track, causes a new track to start
  playing. A quit is the only control you seem to have to stop music
  playing.

  I have also started rhythmbox from a terminal in debug mode using:
  rhythmbox -d 2&> rhythmbox_debug.txt
  and started track tried to pause it, used previous/next buttons, pressed 
play/pause again etc, so multiple tracks were playing.

  I have attached this output to this report.

  If I open the same folder of music (mp3 files) in VLC I can play/pause
  the music, previous/next buttons work ok.

  I have also tried Ubuntu 11.04 from the live CD, where Banshee is the
  default music player. I seemed to get the same behaviour with
  play/pause (ie not working) as I did with rhythmbox in 10.10.

  $ lsb_release -rd
  Description:  Ubuntu 10.10
  Release:  10.10

  $ apt-cache policy rhythmbox
  rhythmbox:
    Installed: 0.13.1-0ubuntu6.1
    Candidate: 0.13.1-0ubuntu6.1
    Version table:
   *** 0.13.1-0ubuntu6.1 0
  500 http://gb.archive.ubuntu.com/ubuntu/ maverick-updates/main i386 
Packages
  100 /var/lib/dpkg/status
   0.13.1-0ubuntu5 0
  500 http://gb.archive.ubuntu.com/ubuntu/ maverick/main i386 Packages

  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: rhythmbox 0.13.1-0ubuntu6.1
  ProcVersionSignature: Ubuntu 2.6.35-28.50-generic-pae 2.6.35.11
  Uname: Linux 2.6.35-28-generic-pae i686
  Architecture: i386
  Date: Fri Jun 10 22:41:02 2011
  EcryptfsInUse: Yes
  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007)
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_GB.utf8
   SHELL=/bin/bash
  SourcePackage: rhythmbox

To manage notifications about this bug go to:
https://bugs.launchpad.net/oem-priority/+bug/795765/+subscriptions

-- 
Mailing list: https://launchpad.net

[Desktop-packages] [Bug 855337] Re: Apport's hook for unity bugs needs translations

[Hendrik Knackstedt]

I don't agree with Martin on this issue. I think bug reporting is
important for non-English-speaking users, especially new users. I heard
many Windows users who don't speak English complain about error messages
beeing in English and not in their native language.

Also, this is an GUI thing so it is farely visible even though it
shouldn't show up for too many users it might though.

** Tags added: i18n precise quantal

** Changed in: unity
   Status: Invalid => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to apport in Ubuntu.
Matching subscriptions: dp-unity
https://bugs.launchpad.net/bugs/855337

Title:
  Apport's hook for unity bugs needs translations

Status in Ubuntu Translations:
  Triaged
Status in Unity:
  Confirmed
Status in “apport” package in Ubuntu:
  Invalid
Status in “unity” package in Ubuntu:
  Triaged

Bug description:
  When apport files a bug against unity, either resulting from a crash,
  or via "ubuntu-bug", the dialog goes something like "Thanks for
  reporting a bug in Unity, is this a graphical bug ...", etc. That
  message in that dialog should also be translated.

  My locale is set to de_DE.UTF-8 .

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: apport-gtk 1.23-0ubuntu1
  ProcVersionSignature: Ubuntu 3.0.0-11.18-generic 3.0.4
  Uname: Linux 3.0.0-11-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 1.23-0ubuntu1
  Architecture: amd64
  CrashReports: 600:1000:1000:585574:2011-09-21 10:10:09.269516000 
+0200:2011-09-21 10:11:01.889515598 
+0200:/var/crash/_usr_lib_unity_unity-panel-service.1000.crash
  Date: Wed Sep 21 10:12:23 2011
  ExecutablePath: /usr/share/apport/apport-gtk
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Beta amd64+mac (20110921)
  InterpreterPath: /usr/bin/python2.7
  PackageArchitecture: all
  ProcEnviron:
   PATH=(custom, no user)
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-translations/+bug/855337/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1010619] Update Released

[Brian Murray]

The verification of this Stable Release Update has completed
successfully and the package has now been released to -updates.
Subsequently, the Ubuntu Stable Release Updates Team is being
unsubscribed and will not receive messages about this bug report.  In
the event that you encounter a regression using the package from
-updates please report a new bug using ubuntu-bug and tag the bug report
regression-update so we can easily find any regresssions.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to rhythmbox in Ubuntu.
https://bugs.launchpad.net/bugs/1010619

Title:
  [SRU] Rhythmbox 2.97 and 2.98 freezes with large collection

Status in The Rhythmbox Music Management Application:
  Fix Released
Status in “rhythmbox” package in Ubuntu:
  Fix Released
Status in “rhythmbox” source package in Quantal:
  Fix Released
Status in “rhythmbox” source package in Raring:
  Fix Released

Bug description:
  [IMPACT]

   * Rhythmbox freezes when using a large collection.

  [TESTCASE]

   * It happens with a large collection.
   * It's due to a deadlock between db load and rhythmdb_add_uri_with_types and 
it's possible that it's not easy to reproduce this bug. Maybe it can be 
interesting to slow down the hard disk (e.g. by copying a large file when 
opening Rhythmbox with a lot of files in its collection)
   * After a few seconds, Rhythmbox will freeze.
   * (this fix has been confirmed by a few people here above.)

  [Regression Potential]

  * According to RB devs: None => 
http://git.gnome.org/browse/rhythmbox/commit/?id=a2ead52faa45a37f28dff1e94cad5f0dadd28129
  * This deadlock has been fixed by RB devs and now it seems they understand 
why there was a deadlock

  [ Other Info ]

  * Raring: A new version (2.98-0ubuntu2) has been uploaded to Raring repos
  * Quantal: This BZR branch contains a fix for this bug: 
lp:~matttbe/ubuntu/quantal/rhythmbox/1010619_795765 (it also contains the 
latest version of '11_fix_cd_pausing.patch' (patch from upstream and also 
available in Raring) linked to the bug: #795765)
For more details about this branch, please have a look at this merge 
request: 
https://code.launchpad.net/~matttbe/ubuntu/quantal/rhythmbox/1010619_795765/+merge/133343


  [ Original Bug Report ]

  Hello,

  With the latest version of RB 2.97-0ubuntu2, the interface freezes at launch.
  I didn't have this bug with the previous version 2.97-0ubuntu1 but it's a bit 
strange because it seems the change between the two versions only concerns 
'audiocd' plugin (and I have this bug with or without this plugin)

  If I launch it with this command, I don't have any problem:
    $ rhythmbox --rhythmdb-file=test.db

  Maybe my (huge) database is corrupted but if I launch RB with the
  debug mode (-d), I don't have this bug (but it takes a few time before
  being ready to use).

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: rhythmbox 2.97-0ubuntu2
  ProcVersionSignature: Ubuntu 3.4.0-5.11-generic 3.4.0
  Uname: Linux 3.4.0-5-generic x86_64
  ApportVersion: 2.1.1-0ubuntu2
  Architecture: amd64
  Date: Fri Jun  8 20:34:40 2012
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Alpha amd64 (20110803.1)
  SourcePackage: rhythmbox
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/rhythmbox/+bug/1010619/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1086019] Re: cupsd crashes regularly (daily)

[Ubuntu Foundations Team Bug Bot]

** Tags added: patch

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1086019

Title:
  cupsd crashes regularly (daily)

Status in “cups” package in Ubuntu:
  Triaged
Status in “cups” source package in Quantal:
  Confirmed

Bug description:
  Every day I get a 'System Problem Detected' dialog that says that
  cupsd has crashed. The symptom is similar to the one described in bug
  1034045.

  I expected this would be fixed by cups 1.6.1-0ubuntu11, but I have
  that version installed and the errors persist. The test case in bug
  1034045 does not result in an immediate crash of cupsd. Specifically,
  this does not produce a crash on my system:

  1. Run 'sudo rm -f /var/crash/_usr_sbin_cupsd.0.crash'
  2. Run 'sudo service cupsd restart'
  3. Verify that a new /var/crash/_usr_sbin_cupsd.0.crash file has been created 
(and if on a desktop, that a new crash notification has been shown).

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: cups 1.6.1-0ubuntu11
  ProcVersionSignature: Error: [Errno 2] No such file or directory: 
'/proc/version_signature'
  Uname: Linux 3.6.3-030603-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.6.1-0ubuntu6
  Architecture: amd64
  CupsErrorLog:
   
  Date: Mon Dec  3 10:49:54 2012
  InstallationDate: Installed on 2010-09-17 (808 days ago)
  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Beta amd64 (20100901.1)
  KernLog:
   Dec  3 10:41:14 steve-laptop kernel: [71466.813974] type=1400 
audit(1354549274.550:29): apparmor="STATUS" operation="profile_replace" 
name="/usr/lib/cups/backend/cups-pdf" pid=15433 comm="apparmor_parser"
   Dec  3 10:41:14 steve-laptop kernel: [71466.814450] type=1400 
audit(1354549274.550:30): apparmor="STATUS" operation="profile_replace" 
name="/usr/sbin/cupsd" pid=15433 comm="apparmor_parser"
  MachineType: Apple Inc. MacBookPro3,1
  MarkForUpload: True
  Papersize: letter
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.6.3-030603-generic 
root=UUID=4b3d81ed-fb5d-4946-97c0-ec537e1bfa3f ro quiet splash
  SourcePackage: cups
  UpgradeStatus: Upgraded to quantal on 2012-08-07 (118 days ago)
  dmi.bios.date: 03/05/08
  dmi.bios.vendor: Apple Inc.
  dmi.bios.version: MBP31.88Z.0070.B07.0803051658
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Mac-F4238BC8
  dmi.board.vendor: Apple Inc.
  dmi.board.version: PVT
  dmi.chassis.asset.tag: Asset Tag#
  dmi.chassis.type: 2
  dmi.chassis.vendor: Apple Inc.
  dmi.chassis.version: Mac-F4238BC8
  dmi.modalias: 
dmi:bvnAppleInc.:bvrMBP31.88Z.0070.B07.0803051658:bd03/05/08:svnAppleInc.:pnMacBookPro3,1:pvr1.0:rvnAppleInc.:rnMac-F4238BC8:rvrPVT:cvnAppleInc.:ct2:cvrMac-F4238BC8:
  dmi.product.name: MacBookPro3,1
  dmi.product.version: 1.0
  dmi.sys.vendor: Apple Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1086019/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1090107] [NEW] Long compiz sessions eventually start showing new windows as empty

[Ben Gamari]

Public bug reported:

After using a compiz session consistently for a week or so, opening a
new window intermittently results in a window frame with no contents.
This can be seen in the attached screenshot (the XSane window in the top
left hand corner of the screen). While not all new windows will be shown
as empty, the probability of this occurring certainly increases in time.

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: xorg 1:7.7+1ubuntu4
Uname: Linux 3.7.0-rc6+ x86_64
.tmp.unity.support.test.0:
 
ApportVersion: 2.6.1-0ubuntu9
Architecture: amd64
CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,imgsvg,text,mousepoll,regex,obs,place,imgpng,animation,expo,neg,ezoom,grid,snap,resize,vpswitch,move,session,wall,unitymtgrabhandles,workarounds,fade,switcher,resizeinfo,scale,unityshell]
CompositorRunning: compiz
Date: Thu Dec 13 14:43:12 2012
DistUpgraded: 2012-10-09 01:03:44,450 DEBUG enabling apt cron job
DistroCodename: quantal
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes
GraphicsCard:
 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) 
[8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
   Subsystem: Dell Device [1028:01fe]
   Subsystem: Dell Device [1028:01fe]
InstallationDate: Installed on 2011-10-19 (421 days ago)
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
MachineType: Dell Inc. Latitude D830
MarkForUpload: True
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
ProcEnviron:
 TERM=xterm
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc6+ 
root=UUID=27880cc8-df42-4098-8e07-3c4fb9dba0a5 ro quiet splash vt.handoff=7
SourcePackage: xorg
Symptom: display
UpgradeStatus: Upgraded to quantal on 2012-10-09 (65 days ago)
dmi.bios.date: 01/04/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A15
dmi.board.vendor: Dell Inc.
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.modalias: 
dmi:bvnDellInc.:bvrA15:bd01/04/2010:svnDellInc.:pnLatitudeD830:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct8:cvr:
dmi.product.name: Latitude D830
dmi.sys.vendor: Dell Inc.
version.compiz: compiz 1:0.9.8.4+bzr3412-0ubuntu0.1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.39-0ubuntu1
version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1
version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6.1
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:6.99.99~git20120913.8637f772-0ubuntu1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.2-0ubuntu3

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 corruption quantal running-unity ubuntu

** Attachment added: "Screenshot showing issue"
   
https://bugs.launchpad.net/bugs/1090107/+attachment/3459355/+files/Screenshot%20from%202012-12-13%2014%3A45%3A40.png

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1090107

Title:
  Long compiz sessions eventually start showing new windows as empty

Status in “xorg” package in Ubuntu:
  New

Bug description:
  After using a compiz session consistently for a week or so, opening a
  new window intermittently results in a window frame with no contents.
  This can be seen in the attached screenshot (the XSane window in the
  top left hand corner of the screen). While not all new windows will be
  shown as empty, the probability of this occurring certainly increases
  in time.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.10
  Package: xorg 1:7.7+1ubuntu4
  Uname: Linux 3.7.0-rc6+ x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.6.1-0ubuntu9
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,imgsvg,text,mousepoll,regex,obs,place,imgpng,animation,expo,neg,ezoom,grid,snap,resize,vpswitch,move,session,wall,unitymtgrabhandles,workarounds,fade,switcher,resizeinfo,scale,unityshell]
  CompositorRunning: compiz
  Date: Thu Dec 13 14:43:12 2012
  DistUpgraded: 2012-10-09 01:03:44,450 DEBUG enabling apt cron job
  DistroCodename: quantal
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller 
(primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
 Subsystem: Dell Device [1028:01fe]
 Subsystem: Dell Device [1028:01fe]
  InstallationDate: Installed on 2011-10-19 (421 days ago)
  InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
  MachineType: Dell Inc. Latitude D830
  MarkForUpload: True
  PccardctlIdent:
   Socket 0: