[Desktop-packages] [Bug 1390474] [NEW] Volume element PCM has 6 channels. That's too much! with Terratec PHASE26
Public bug reported: When connecting the Terratec PHASE26 in 16/48 mode (6 channels) I get the error Volume element PCM has 6 channels. That's too much! I can't handle that! and the card fails to show up in Sound Settings. Everything is fine with 24/48 mode (2 channels). ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Attachment added: output of pulseaudio - https://bugs.launchpad.net/bugs/1390474/+attachment/4255236/+files/phase26-pa.log -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1390474 Title: Volume element PCM has 6 channels. That's too much! with Terratec PHASE26 Status in “pulseaudio” package in Ubuntu: New Bug description: When connecting the Terratec PHASE26 in 16/48 mode (6 channels) I get the error Volume element PCM has 6 channels. That's too much! I can't handle that! and the card fails to show up in Sound Settings. Everything is fine with 24/48 mode (2 channels). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390474/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1371834] Re: Chrome causes segfault in i965_dri.so
I get this on a Toshiba satellite A200. vera@vera-Satellite-A200:~$ lsb_release -a uname -a lspci | grep VGA sudo lshw -C display sudo tail -n 500 /var/log/syslog | grep segfault No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 14.10 Release:14.10 Codename: utopic Linux vera-Satellite-A200 3.16.0-24-generic #32-Ubuntu SMP Tue Oct 28 13:07:32 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) *-display:0 description: VGA compatible controller product: Mobile GM965/GL960 Integrated Graphics Controller (primary) vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 0c width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:fc00-fc0f memory:d000-dfff ioport:1800(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile GM965/GL960 Integrated Graphics Controller (secondary) vendor: Intel Corporation physical id: 2.1 bus info: pci@:00:02.1 version: 0c width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:fc10-fc1f Nov 7 13:45:14 vera-Satellite-A200 kernel: [ 278.520597] chrome[3252]: segfault at 1f8 ip 7fcfec6e963f sp 7fff01827f90 error 4 in i965_dri.so[7fcfec396000+51c000] Nov 7 13:45:16 vera-Satellite-A200 kernel: [ 280.024896] chrome[3360]: segfault at 1f8 ip 7f9f479e263f sp 7fff3e64a660 error 4 in i965_dri.so[7f9f4768f000+51c000] Nov 7 13:45:16 vera-Satellite-A200 kernel: [ 280.634651] chrome[3377]: segfault at 1f8 ip 7f7d09e8763f sp 7fffd97b16d0 error 4 in i965_dri.so[7f7d09b34000+51c000] Nov 7 14:22:07 vera-Satellite-A200 kernel: [ 2491.312700] chrome[4597]: segfault at 1f8 ip 7f1aed7e863f sp 7fff40586950 error 4 in i965_dri.so[7f1aed495000+51c000] Nov 7 14:22:08 vera-Satellite-A200 kernel: [ 2492.712524] chrome[4690]: segfault at 1f8 ip 7f14516d063f sp 7fffcd6ba780 error 4 in i965_dri.so[7f145137d000+51c000] Nov 7 14:22:09 vera-Satellite-A200 kernel: [ 2493.416469] chrome[4701]: segfault at 1f8 ip 7f3cf8ec863f sp 7fff4ab763f0 error 4 in i965_dri.so[7f3cf8b75000+51c000] -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1371834 Title: Chrome causes segfault in i965_dri.so Status in Chromium Browser: Unknown Status in “mesa” package in Ubuntu: Confirmed Status in Debian GNU/Linux: New Bug description: Running chrome 38.0.2125.66-1 on Ubuntu 14.10, on Lenovo X230 When I start a new instance of chrome, it cannot enable WebGL. I have reported that bug separately to chrome at https://code.google.com/p/chromium/issues/detail?id=416207 I suspect the cause of the bug is in mesa, as dmesg contains evidence of a segfault: [31979.398090] chrome[24013]: segfault at 20 ip 7fbbd5ca5d83 sp 7fffd7669ab0 error 4 in i965_dri.so[7fbbd59c4000+50a000] [31979.585606] chrome[24104]: segfault at 20 ip 7f7550c26d83 sp 7fff970b4630 error 4 in i965_dri.so[7f7550945000+50a000] [31979.737378] chrome[24117]: segfault at 20 ip 7ffd06e45d83 sp 7fffc989f440 error 4 in i965_dri.so[7ffd06b64000+50a000] ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: libgl1-mesa-dri 10.2.6-1ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-16.22-generic 3.16.2 Uname: Linux 3.16.0-16-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sat Sep 20 11:17:41 2014 DistUpgraded: 2014-09-02 14:59:08,481 DEBUG failed to SystemUnLock() (E:Not locked) DistroCodename: utopic DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:21fa] MachineType: LENOVO 23301B9 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-16-generic root=/dev/mapper/hostname--vg-root ro splash quiet crashkernel=384M-:128M crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M vt.handoff=7 SourcePackage: mesa UpgradeStatus: Upgraded to utopic on 2014-09-02 (17 days ago) dmi.bios.date: 07/09/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET95WW (2.55 ) dmi.board.asset.tag: Not Available dmi.board.name: 23301B9 dmi.board.vendor: LENOVO dmi.board.version: 0B98401 Pro dmi.chassis.asset.tag: No Asset Information
[Desktop-packages] [Bug 682788] Re: Improve Unity Global Menu
Four years have passed and we still have no permanent menus and most of the issues posed by this bug remain acknowledged but unsolved. I can't quite get what the process is, but it just isn't working. Are these issues being looked at in Unity 8 at least? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-control-center in Ubuntu. https://bugs.launchpad.net/bugs/682788 Title: Improve Unity Global Menu Status in Ayatana Design: Fix Committed Status in Compiz: Invalid Status in Unity: Fix Released Status in “unity” package in Ubuntu: Fix Released Status in “unity-control-center” package in Ubuntu: Triaged Status in Baltix GNU/Linux: Confirmed Bug description: ===+++ _ ! ALL USERS ! _ +++=== ===+++ READ THIS BEFORE MAKING A COMMENT OR MODIFICATION +++=== IMPORTANT 1: Please don't post any me too message; use the Does this bug affect you? feature you can find a bit above this bug description on Launchpad. IMPORTANT 2: Do not post anything if you haven't read all comments to verify that your point hasn't been made. If you feel tempted to stop reading because there are too many messages, that is a strong indicator that you shouldn't add even more comments. Developers have a tough time to find anything if you post redundant stuff. So please abstain from doing that. = Global menu in general (not only in Unity) is very unergonomic on large screens (see the attached screenshot) because if you have a small window somewhere near the low right corner you have to move the cursor all the way up to to panel to reach the menu. I understand why the global menu was used for the netbook edition (it saves space and most windows are maximized), but since Unity is intended to be for the desktop edition there should be an option to switch to the traditional position of the app menu. It would be welcomed by many desktop users. Please try to find a solution for it that works. A commonly suggested solution is: [ ] Global Menu on [ ] Global Menu off [ ] Global Menu only for maximized windows The default is usually suggested as either the first (on) or last (on only for maximized windows). - Desired change: Implement the 'Enhanced Menu' project for 12.10. This project will address the issue described in this bug and also issues described in the duplicates of this bus. Note this is the 'official' bug that tracks the implementation of this project. The following options will be added to 'System Settings/Appearance': --- Menus Location:Global/Local Visibility: Hidden/Always displayed --- To manage notifications about this bug go to: https://bugs.launchpad.net/ayatana-design/+bug/682788/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1309801] Re: [xubuntu] chromium redraw issue after switching workspaces
I'm still experiencing this. Ubuntu LTS 14.04, Chrome 38.0.2125.111, using XMonad as a DE. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1309801 Title: [xubuntu] chromium redraw issue after switching workspaces Status in “chromium-browser” package in Ubuntu: Confirmed Bug description: When I switch between workspaces in xubuntu, the chromium windows more often than not are only partially visible or else completely transparent. Moving the window (hold alt and drag) does not always fix the issue, but resizing always does. I've taken a video I will attach to the bug. Expected: See the chromium window and tabs I have open. Actual: Window is invisible or partially invisible. See attached video. % lsb_release -rd Description: Ubuntu 14.04 LTS Release: 14.04 % apt-cache policy chromium-browser chromium-browser: Installed: 34.0.1847.116-0ubuntu2 Candidate: 34.0.1847.116-0ubuntu2 Version table: *** 34.0.1847.116-0ubuntu2 0 500 http://ca.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: chromium-browser 34.0.1847.116-0ubuntu2 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CurrentDesktop: XFCE Date: Fri Apr 18 17:38:04 2014 Desktop-Session: DESKTOP_SESSION = xubuntu XDG_CONFIG_DIRS = /etc/xdg/xdg-xubuntu:/usr/share/upstart/xdg:/etc/xdg:/etc/xdg XDG_DATA_DIRS = /usr/share/xubuntu:/usr/share/xfce4:/usr/local/share/:/usr/share/:/usr/share DiskUsage: b'Filesystem Type Size Used Avail Use% Mounted on\n/dev/sda1 ext4 228G 16G 201G 8% /\nnone tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup\nudev devtmpfs 3.7G 4.0K 3.7G 1% /dev\ntmpfs tmpfs 755M 1.1M 754M 1% /run\nnone tmpfs 5.0M 0 5.0M 0% /run/lock\nnone tmpfs 3.7G 20M 3.7G 1% /run/shm\nnone tmpfs 100M 52K 100M 1% /run/user\n' Inodes: b'Filesystem Inodes IUsed IFree IUse% Mounted on\n/dev/sda1 15M 298K 15M3% /\nnone 944K 2 944K1% /sys/fs/cgroup\nudev 942K 500 941K1% /dev\ntmpfs 944K 495 944K1% /run\nnone 944K 3 944K1% /run/lock\nnone 944K40 944K1% /run/shm\nnone 944K85 944K1% /run/user\n' Env: MOZ_PLUGIN_PATH = None LD_LIBRARY_PATH = None ExecutablePath: /usr/lib/chromium-browser/chromium-browser InstallationDate: Installed on 2014-04-18 (0 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) SourcePackage: chromium-browser UpgradeStatus: No upgrade log present (probably fresh install) chromium-default: CHROMIUM_FLAGS= gconf-keys: /desktop/gnome/applications/browser/exec = b'firefox\n'/desktop/gnome/url-handlers/https/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/https/enabled = b'true\n'/desktop/gnome/url-handlers/http/command = b'sensible-browser %s\n'/desktop/gnome/url-handlers/http/enabled = b'true\n'/desktop/gnome/session/required_components/windowmanager = b''/apps/metacity/general/compositing_manager = b''/desktop/gnome/interface/icon_theme = b'gnome\n'/desktop/gnome/interface/gtk_theme = b'Clearlooks\n' modified.conffile..etc.default.chromium.browser: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1309801/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1220426] Re: [nvidia-prime]Freeze while using touchpad
People could try out https://github.com/BlueDragonX/xf86-input-mtrack and see if they get any mileage out of that. It's generally better than synaptics if it had proper hysteresis, however, I ran into problems with defining soft button zones on my clickpad. (It arranged them vertically as opposed to horizontally.) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-prime in Ubuntu. https://bugs.launchpad.net/bugs/1220426 Title: [nvidia-prime]Freeze while using touchpad Status in “nvidia-graphics-drivers-319” package in Ubuntu: Triaged Status in “nvidia-graphics-drivers-331” package in Ubuntu: Triaged Status in “nvidia-graphics-drivers-343” package in Ubuntu: Triaged Status in “nvidia-prime” package in Ubuntu: Triaged Bug description: I'm using an Optimus laptop (Asus N43SL) nvidia-prime is installed, so my nvidia dedicated graphics card (GT 540m) is in use. Once in a while, my screen will freeze, only when I use my touchpad. This does not happen with my USB mouse. This does not happen either when I uninstall nvidia-prime and use my intel integrated graphics (HD3000). I can temporarily solve the issue by doing a VT switch. In the attached Xorg.0.log, you can see synaptics: ETPS/2 Elantech Touchpad: touchpad found each time I did a VT switch and regained control. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-319/+bug/1220426/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1322425] Re: Network-Manager won't connect to wifi with n-channels
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: network-manager (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1322425 Title: Network-Manager won't connect to wifi with n-channels Status in “network-manager” package in Ubuntu: Confirmed Bug description: ubuntu@ubuntu:~$ lsb_release -rd Description: Ubuntu 14.04 LTS Release: 14.04 ubuntu@ubuntu:~$ apt-cache policy network-manager network-manager: Installed: 0.9.8.8-0ubuntu7 Candidate: 0.9.8.8-0ubuntu7 Version table: *** 0.9.8.8-0ubuntu7 0 500 http://archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status ubuntu@ubuntu:~$ uname -a Linux ubuntu 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Problem with wifi connection. Behavior in 13.04, 13.10, using laptop's built'in wifi adapter (wlan0, see diagnostics below): Connection is ok, in fact so fast that the laptop is connected by the time lightdm shows login screen. Behavior in 14.04 LTS: With laptop's built-in wifi adapter (wlan0) - prompt for password (for secure WEP-Personal network), attempt to connect, prompt for password again, attempt again, repeat. Never connects, process only interruptible by user intervension (hit Cancel). Same result in the case of a non-secured open network on same AP - connection fails (except no prompt for password obviously). With USB wifi dongle plugged in (wlan1) - connection is quick and flawless. Expected behavior: network-manager should connect with the laptop's built-in wan adapter (wan0) ***as it did in the previous versions mentioned above, same laptop, same hardware, sam AP, same network(s).*** Some diagnostics: lspci: (Built-in wlan0: Intel Corporation Centrino Advanced-N 6200 usb wifi dongle wlan1:Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller lspci output: ubuntu@ubuntu:~$ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:4239] (rev 35) Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN [8086:1311] Kernel driver in use: iwlwifi 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:7001] Kernel driver in use: r8169 ifconfig output: eth0 Link encap:Ethernet HWaddr 60:eb:69:41:6c:38 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:729 errors:0 dropped:0 overruns:0 frame:0 TX packets:729 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:75318 (75.3 KB) TX bytes:75318 (75.3 KB) wlan0 Link encap:Ethernet HWaddr 00:27:10:97:75:9c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan1 Link encap:Ethernet HWaddr 00:21:2f:35:73:50 inet addr:192.168.0.40 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::221:2fff:fe35:7350/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11823 errors:0 dropped:1 overruns:0 frame:0 TX packets:5340 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8420626 (8.4 MB) TX bytes:810908 (810.9 KB) iwconfig: wlan1 IEEE 802.11bg ESSID:AVITAL_SECURE Nickname:rtl_wifi Mode:Managed Frequency:2.462 GHz Access Point: 00:18:4D:44:A4:BD Bit Rate:54 Mb/s Sensitivity:0/0 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=100/100 Signal level=100/100 Noise level=0/100 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. lono wireless extensions. wlan0 IEEE 802.11abgn ESSID:off/any Mode:Managed
[Desktop-packages] [Bug 1027410] Re: Crash when opening a WMV file
I confirm this is not a VLC bug, but a libav one. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libav in Ubuntu. https://bugs.launchpad.net/bugs/1027410 Title: Crash when opening a WMV file Status in “libav” package in Ubuntu: Confirmed Status in “vlc” package in Ubuntu: Confirmed Bug description: There is a WMV file I am trying to play but VLC crashes when I open it : VLC media player 2.0.1 Twoflower (revision 2.0.1-0-gf432547) [0x9cbd908] main libvlc: Lancement de vlc avec l'interface par défaut. Utilisez « cvlc » pour démarrer VLC sans interface. [vc1 @ 0xb5304200] Bits overconsumption: 102040 102032 [vc1 @ 0xb5304200] concealing 837 DC, 837 AC, 837 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 22776 22768 [vc1 @ 0xb5304200] concealing 980 DC, 980 AC, 980 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 74392 74384 [vc1 @ 0xb5304200] concealing 366 DC, 366 AC, 366 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 39104 39096 at 38x19 [vc1 @ 0xb5304200] concealing 369 DC, 369 AC, 369 MV errors [0xb5100618] main input error: ES_OUT_SET_(GROUP_)PCR is called too late (pts_delay increased to 300 ms) [0xb5100618] main input error: ES_OUT_RESET_PCR called [wmav2 @ 0xb5322a20] prev_block_len_bits 6 out of range [wmav2 @ 0xb5322a20] next_block_len_bits 5 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 4 out of range [wmav2 @ 0xb5322a20] block_len_bits 6 out of range [vc1 @ 0xb5304200] Bits overconsumption: 94824 94816 [vc1 @ 0xb5304200] concealing 1004 DC, 1004 AC, 1004 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 69064 69056 [vc1 @ 0xb5304200] concealing 630 DC, 630 AC, 630 MV errors [wmav2 @ 0xb5322a20] prev_block_len_bits 6 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 4 out of range [wmav2 @ 0xb5322a20] frame_len overflow [wmav2 @ 0xb5322a20] prev_block_len_bits 4 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 5 out of range [wmav2 @ 0xb5322a20] overflow in spectral RLE, ignoring [wmav2 @ 0xb5322a20] next_block_len_bits 5 out of range [wmav2 @ 0xb5322a20] next_block_len_bits 5 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 5 out of range [wmav2 @ 0xb5322a20] next_block_len_bits 4 out of range [wmav2 @ 0xb5322a20] block_len_bits 5 out of range [wmav2 @ 0xb5322a20] block_len_bits 6 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 6 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 4 out of range [wmav2 @ 0xb5322a20] block_len_bits 4 out of range [wmav2 @ 0xb5322a20] next_block_len_bits 4 out of range [vc1 @ 0xb5304200] Bits overconsumption: 80344 80336 [vc1 @ 0xb5304200] concealing 411 DC, 411 AC, 411 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 61368 61360 [vc1 @ 0xb5304200] concealing 753 DC, 753 AC, 753 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 53624 53616 at 0x22 [vc1 @ 0xb5304200] concealing 229 DC, 229 AC, 229 MV errors Erreur de segmentation (core dumped) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: vlc 2.0.1-4 ProcVersionSignature: Ubuntu 3.2.0-26.41-generic-pae 3.2.19 Uname: Linux 3.2.0-26-generic-pae i686 ApportVersion: 2.0.1-0ubuntu11 Architecture: i386 Date: Sat Jul 21 16:00:32 2012 ProcEnviron: LANGUAGE=fr_FR:en TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: vlc UpgradeStatus: Upgraded to precise on 2012-04-27 (85 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libav/+bug/1027410/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1366400] [NEW] vlc crashes on wmv files
You have been subscribed to a public bug: Example file: https://archive.org/download/Windows7WildlifeSampleVideo/Wildlife.wmv $ vlc --version VLC media player 2.1.4 Rincewind (revision 2.1.4-0-g2a072be) VLC version 2.1.4 Rincewind (2.1.4-0-g2a072be) Compiled by buildd on brownie.buildd (May 17 2014 14:52:46) Compiler: gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) This program comes with NO WARRANTY, to the extent permitted by law. You may redistribute it under the terms of the GNU General Public License; see the file named COPYING for details. Written by the VideoLAN team; see the AUTHORS file. $ gdb vlc GNU gdb (Ubuntu 7.7-0ubuntu3.1) 7.7 Copyright (C) 2014 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as x86_64-linux-gnu. Type show configuration for configuration details. For bug reporting instructions, please see: http://www.gnu.org/software/gdb/bugs/. Find the GDB manual and other documentation resources online at: http://www.gnu.org/software/gdb/documentation/. For help, type help. Type apropos word to search for commands related to word... Reading symbols from vlc...Reading symbols from /usr/lib/debug/.build-id/63/a2c2e7d5b12db4ad69cc38da86622492649af9.debug...done. done. (gdb) run Wildlife.wmv Starting program: /usr/bin/vlc Wildlife.wmv [Thread debugging using libthread_db enabled] Using host libthread_db library /lib/x86_64-linux-gnu/libthread_db.so.1. VLC media player 2.1.4 Rincewind (revision 2.1.4-0-g2a072be) [New Thread 0x7fffeba6d700 (LWP 6004)] [New Thread 0x77fd5700 (LWP 6005)] [New Thread 0x749f4700 (LWP 6006)] [New Thread 0x73771700 (LWP 6007)] [0x605118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. [New Thread 0x7fffeb26c700 (LWP 6008)] [Thread 0x749f4700 (LWP 6006) exited] [New Thread 0x7fffe8462700 (LWP 6009)] [Thread 0x7fffeb26c700 (LWP 6008) exited] [New Thread 0x7fffcc5e7700 (LWP 6081)] [New Thread 0x7fffcbde6700 (LWP 6086)] [New Thread 0x7fffcb180700 (LWP 6095)] [New Thread 0x7fffca97f700 (LWP 6096)] [New Thread 0x7fffca17e700 (LWP 6097)] [New Thread 0x7fffeb26c700 (LWP 6159)] [New Thread 0x749f4700 (LWP 6163)] [Thread 0x7fffca17e700 (LWP 6097) exited] [New Thread 0x7fffe815e700 (LWP 6244)] [New Thread 0x7fffdc108700 (LWP 6247)] Fontconfig warning: FcPattern object size does not accept value 0 Fontconfig warning: FcPattern object size does not accept value 0 [New Thread 0x7fffc8158700 (LWP 6308)] Fontconfig warning: FcPattern object size does not accept value 0 Fontconfig warning: FcPattern object size does not accept value 0 [0x7fffa0001248] main vout display error: Failed to resize display [0x7fffb9b8] main input error: ES_OUT_SET_(GROUP_)PCR is called too late (pts_delay increased to 300 ms) [0x7fffb9b8] main input error: ES_OUT_RESET_PCR called [vc1 @ 0x7fffa8c580e0] warning: first frame is no keyframe Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffe815e700 (LWP 6244)] DecoderDecodeAudio (p_dec=0x, p_dec@entry=0x7fffa8c09f38, p_block=0x0, p_block@entry=0x7fffa8c5ef10) at input/decoder.c:1251 1251input/decoder.c: No such file or directory. (gdb) c Continuing. [Thread 0x749f4700 (LWP 6163) exited] [Thread 0x7fffeb26c700 (LWP 6159) exited] [Thread 0x7fffca97f700 (LWP 6096) exited] [Thread 0x7fffcb180700 (LWP 6095) exited] [Thread 0x7fffcbde6700 (LWP 6086) exited] [Thread 0x7fffcc5e7700 (LWP 6081) exited] [Thread 0x73771700 (LWP 6007) exited] [Thread 0x77fd5700 (LWP 6005) exited] [Thread 0x7fffeba6d700 (LWP 6004) exited] [Thread 0x77fd6740 (LWP 6000) exited] [Thread 0x7fffe815e700 (LWP 6244) exited] [Thread 0x7fffe8462700 (LWP 6009) exited] [Thread 0x7fffc8158700 (LWP 6308) exited] Program terminated with signal SIGSEGV, Segmentation fault. The program no longer exists. (gdb) q ** Affects: libav (Ubuntu) Importance: Undecided Status: Confirmed -- vlc crashes on wmv files https://bugs.launchpad.net/bugs/1366400 You received this bug notification because you are a member of Desktop Packages, which is subscribed to libav in Ubuntu. -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390494] Re: Unable to correctly render many Ghostscript/LaTeX produced files
** Attachment added: Second sample of PDF that incorrectly renders https://bugs.launchpad.net/ubuntu/+source/poppler/+bug/1390494/+attachment/4255261/+files/sample2.pdf -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to poppler in Ubuntu. https://bugs.launchpad.net/bugs/1390494 Title: Unable to correctly render many Ghostscript/LaTeX produced files Status in “poppler” package in Ubuntu: New Bug description: Hi everyone, For months at least, Evince has been unable to render many PDF files that have been - I suppose - produced by Ghostcript/LaTeX traditional compilers. I assume this is a bug as Adobe Acrobat Reader correctly display them both in Linux and Mac OS X. Evince shows no common error related to those files. The version I am using is 3.4.0 under Ubuntu 12.04 Precise LTS. Here is an example of bug that occurs in Evince 3.4.0. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/poppler/+bug/1390494/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390494] Re: Unable to correctly render many Ghostscript/LaTeX produced files
** Attachment added: The second sample correctly rendered in Adobe Acrobat Reader https://bugs.launchpad.net/ubuntu/+source/poppler/+bug/1390494/+attachment/4255262/+files/sample2.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to poppler in Ubuntu. https://bugs.launchpad.net/bugs/1390494 Title: Unable to correctly render many Ghostscript/LaTeX produced files Status in “poppler” package in Ubuntu: New Bug description: Hi everyone, For months at least, Evince has been unable to render many PDF files that have been - I suppose - produced by Ghostcript/LaTeX traditional compilers. I assume this is a bug as Adobe Acrobat Reader correctly display them both in Linux and Mac OS X. Evince shows no common error related to those files. The version I am using is 3.4.0 under Ubuntu 12.04 Precise LTS. Here is an example of bug that occurs in Evince 3.4.0. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/poppler/+bug/1390494/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390494] [NEW] Unable to correctly render many Ghostscript/LaTeX produced files
Public bug reported: Hi everyone, For months at least, Evince has been unable to render many PDF files that have been - I suppose - produced by Ghostcript/LaTeX traditional compilers. I assume this is a bug as Adobe Acrobat Reader correctly display them both in Linux and Mac OS X. Evince shows no common error related to those files. The version I am using is 3.4.0 under Ubuntu 12.04 Precise LTS. Here is an example of bug that occurs in Evince 3.4.0. ** Affects: poppler (Ubuntu) Importance: Undecided Status: New ** Tags: evince ghostscript latex pdf ** Attachment added: Sample of PDF that incorrectly renders https://bugs.launchpad.net/bugs/1390494/+attachment/4255259/+files/sample1.pdf -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to poppler in Ubuntu. https://bugs.launchpad.net/bugs/1390494 Title: Unable to correctly render many Ghostscript/LaTeX produced files Status in “poppler” package in Ubuntu: New Bug description: Hi everyone, For months at least, Evince has been unable to render many PDF files that have been - I suppose - produced by Ghostcript/LaTeX traditional compilers. I assume this is a bug as Adobe Acrobat Reader correctly display them both in Linux and Mac OS X. Evince shows no common error related to those files. The version I am using is 3.4.0 under Ubuntu 12.04 Precise LTS. Here is an example of bug that occurs in Evince 3.4.0. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/poppler/+bug/1390494/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390494] Re: Unable to correctly render many Ghostscript/LaTeX produced files
** Attachment added: The first sample correctly rendered in Adobe Acrobat Reader https://bugs.launchpad.net/ubuntu/+source/poppler/+bug/1390494/+attachment/4255260/+files/sample1.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to poppler in Ubuntu. https://bugs.launchpad.net/bugs/1390494 Title: Unable to correctly render many Ghostscript/LaTeX produced files Status in “poppler” package in Ubuntu: New Bug description: Hi everyone, For months at least, Evince has been unable to render many PDF files that have been - I suppose - produced by Ghostcript/LaTeX traditional compilers. I assume this is a bug as Adobe Acrobat Reader correctly display them both in Linux and Mac OS X. Evince shows no common error related to those files. The version I am using is 3.4.0 under Ubuntu 12.04 Precise LTS. Here is an example of bug that occurs in Evince 3.4.0. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/poppler/+bug/1390494/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1386241] Re: Add the full IPP Everywhere support from Utopic to Trusty
Hello Till I'm still testing but something appears wrong. When I plug the printer in I get Missing sysattr idVendor in the syslog. Which means the device path udev-configure-printer is trying to find the vendor, product ids, and serial number from, is not the device's root. udev-configure-printer is reporting the device as /devices/pci:00/:00:14.0/usb3/3-4/3-4:1.1 which is not the device's root but instead the path to one of the device's interfaces. But the patch I included should be navigating up the tree to the device's root. This is one of the existing bugs I tried to fix that occured before I made my patch. If I unplug and plug the printer into a different usb port it correctly finds the vendor id. This second time when it worked the path was: /devices/pci:00/:00:14.0/usb3/3-10/3-10:1.1 I've even removed the ippusbxd binary from /usr/sbin so it is oing through ippusb scanning. Which means, at least for this printer, something more fundamental is broken. Sorry, I do not had much time to work on printer stuff so I'm slowly testing the patches. Daniel 2014-11-07 7:48 GMT+09:00 Till Kamppeter 1386...@bugs.launchpad.net: Daniel, can you test whether all is working correctly with IPP-over-USB on both Utopic and Trusty? -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1386241 Title: Add the full IPP Everywhere support from Utopic to Trusty Status in “cups” package in Ubuntu: Fix Released Status in “cups-filters” package in Ubuntu: Fix Released Status in “system-config-printer” package in Ubuntu: Fix Released Status in “cups” source package in Trusty: Fix Committed Status in “cups-filters” source package in Trusty: Fix Committed Status in “system-config-printer” source package in Trusty: Fix Committed Bug description: This is a hardware enablement SRU for Ubuntu 14.04 LTS (Trusty). From 14.10 (Utopic) on Ubuntu has full support for IPP Everywhere printing: 1. Printing on IPP Everywhere printers 2. Printing on IPP-over-USB printers 3. When sharing a printer to the network the shared print queue emulates an IPP Everywhere printer 4. PPD-less printing on IPP network printers (IPP Everywhere, PDF, PostScript, PCL) without need of a printer setup tool 14.04 *Trusty), the current LTS, supports only (4). An OEM asked whether we could backport the full IPP Everywhere support to Trusty. This bug report is about the backport of IPP Everywhere support into Trusty as an SRU. Affected are the source packages cups-filters, cups, and system- config-printer: cups-filters: - Add ippusbxd (Support for IPP-over-USB printers), generating the new binary package cups-filters-ippusbxd. Its installation in Trusty will be assured by a dependency on it in system-config-printer-udev - Add rastertopdf filter. This filter allows PWG Raster as input format for a CUPS queue. This is needed to make shared CUPS printers fully emulating IPP Everywhere printers (all other requirements are fulfilled by CUPS itself). - Add conversion rule for rastertopdf filter to the MIME conversion rules. - Add PPD file for a generic IPP Everywhere printer (on-the-fly auto-generation by cupsfilters.drv). - Support for PWG-Raster output activation via a keyword in the PPD file. - pdftoraster filter: Support for output in the color spaces 18 (sGray), 19 (sRGB), and 20 (Adobe RGB). No color management appropriate to these color spaces is added yet. system-config-printer: - Add auto-setup for UDEV-discovered IPP-over-USB printers using ippusbxd. cups: - Fix priority setting of PWG Raster MIME type, so that PWG Raster input is actually recognized. [Impact] Trusty has a total support life of 5 years, ending in April 2019, but it does not support the new PWG standard IPP Everywhere for driverless printing. So in the near future many new printer models which can get easily supported under Linux as they are fulfilling an open standard are not supported by Trusty. This is especially very bad for Trusty being used as pre-installed OS on new PC/notebook/server hardware and on mobile devices. [Test Case] 1. Connect an IPP Everywhere printer to the network and try to set it up. There is no suitable selection in the Make/Model lists (no Generic IPP Everywhere Printer). 2. Connect an IPP-over-USB printer to the USB. It gets set up automatically but with the conventional USB interface, not giving access to the printer's configuration web interface and other network-printer-typical features. 3. Share a local print queue on your box and try to access this queue with a mobile device which supports printing on IPP Everywhere printers. The printer will not be found or be found based on older mobile printing protocols. After installing this SRU (all
[Desktop-packages] [Bug 1366400] Re: vlc crashes on wmv files
Affects also totem, so not VLC related. ** Package changed: vlc (Ubuntu) = libav (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libav in Ubuntu. https://bugs.launchpad.net/bugs/1366400 Title: vlc crashes on wmv files Status in “libav” package in Ubuntu: Confirmed Bug description: Example file: https://archive.org/download/Windows7WildlifeSampleVideo/Wildlife.wmv $ vlc --version VLC media player 2.1.4 Rincewind (revision 2.1.4-0-g2a072be) VLC version 2.1.4 Rincewind (2.1.4-0-g2a072be) Compiled by buildd on brownie.buildd (May 17 2014 14:52:46) Compiler: gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) This program comes with NO WARRANTY, to the extent permitted by law. You may redistribute it under the terms of the GNU General Public License; see the file named COPYING for details. Written by the VideoLAN team; see the AUTHORS file. $ gdb vlc GNU gdb (Ubuntu 7.7-0ubuntu3.1) 7.7 Copyright (C) 2014 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as x86_64-linux-gnu. Type show configuration for configuration details. For bug reporting instructions, please see: http://www.gnu.org/software/gdb/bugs/. Find the GDB manual and other documentation resources online at: http://www.gnu.org/software/gdb/documentation/. For help, type help. Type apropos word to search for commands related to word... Reading symbols from vlc...Reading symbols from /usr/lib/debug/.build-id/63/a2c2e7d5b12db4ad69cc38da86622492649af9.debug...done. done. (gdb) run Wildlife.wmv Starting program: /usr/bin/vlc Wildlife.wmv [Thread debugging using libthread_db enabled] Using host libthread_db library /lib/x86_64-linux-gnu/libthread_db.so.1. VLC media player 2.1.4 Rincewind (revision 2.1.4-0-g2a072be) [New Thread 0x7fffeba6d700 (LWP 6004)] [New Thread 0x77fd5700 (LWP 6005)] [New Thread 0x749f4700 (LWP 6006)] [New Thread 0x73771700 (LWP 6007)] [0x605118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. [New Thread 0x7fffeb26c700 (LWP 6008)] [Thread 0x749f4700 (LWP 6006) exited] [New Thread 0x7fffe8462700 (LWP 6009)] [Thread 0x7fffeb26c700 (LWP 6008) exited] [New Thread 0x7fffcc5e7700 (LWP 6081)] [New Thread 0x7fffcbde6700 (LWP 6086)] [New Thread 0x7fffcb180700 (LWP 6095)] [New Thread 0x7fffca97f700 (LWP 6096)] [New Thread 0x7fffca17e700 (LWP 6097)] [New Thread 0x7fffeb26c700 (LWP 6159)] [New Thread 0x749f4700 (LWP 6163)] [Thread 0x7fffca17e700 (LWP 6097) exited] [New Thread 0x7fffe815e700 (LWP 6244)] [New Thread 0x7fffdc108700 (LWP 6247)] Fontconfig warning: FcPattern object size does not accept value 0 Fontconfig warning: FcPattern object size does not accept value 0 [New Thread 0x7fffc8158700 (LWP 6308)] Fontconfig warning: FcPattern object size does not accept value 0 Fontconfig warning: FcPattern object size does not accept value 0 [0x7fffa0001248] main vout display error: Failed to resize display [0x7fffb9b8] main input error: ES_OUT_SET_(GROUP_)PCR is called too late (pts_delay increased to 300 ms) [0x7fffb9b8] main input error: ES_OUT_RESET_PCR called [vc1 @ 0x7fffa8c580e0] warning: first frame is no keyframe Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffe815e700 (LWP 6244)] DecoderDecodeAudio (p_dec=0x, p_dec@entry=0x7fffa8c09f38, p_block=0x0, p_block@entry=0x7fffa8c5ef10) at input/decoder.c:1251 1251 input/decoder.c: No such file or directory. (gdb) c Continuing. [Thread 0x749f4700 (LWP 6163) exited] [Thread 0x7fffeb26c700 (LWP 6159) exited] [Thread 0x7fffca97f700 (LWP 6096) exited] [Thread 0x7fffcb180700 (LWP 6095) exited] [Thread 0x7fffcbde6700 (LWP 6086) exited] [Thread 0x7fffcc5e7700 (LWP 6081) exited] [Thread 0x73771700 (LWP 6007) exited] [Thread 0x77fd5700 (LWP 6005) exited] [Thread 0x7fffeba6d700 (LWP 6004) exited] [Thread 0x77fd6740 (LWP 6000) exited] [Thread 0x7fffe815e700 (LWP 6244) exited] [Thread 0x7fffe8462700 (LWP 6009) exited] [Thread 0x7fffc8158700 (LWP 6308) exited] Program terminated with signal SIGSEGV, Segmentation fault. The program no longer exists. (gdb) q To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libav/+bug/1366400/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1324243] Re: Several applications crashes when reading a mpeg4 video
VLC 2.2.0 is in Utopic. ** Changed in: vlc (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1324243 Title: Several applications crashes when reading a mpeg4 video Status in “nautilus” package in Ubuntu: New Status in “vlc” package in Ubuntu: Fix Released Bug description: I am reporting this bug on the Ubuntu section as it affects several programs. Yesterday (2014-05-27) I started experiencing crashes with HD channels on my DVB-T tuner and the latest version of Kaffeine that uses VLC facilites for decoding. My Ubuntu version is a 14.04 LTS x64 and is up to date. I had a small video recorded one week ago when the HD video decoding was still working. Now if I play it with Kaffeine - crash. If I try to read it in VLC - crash, if I try to check properties in Nautilus - crash, try to play in Totem - crash So it looks like a low level component was updated and is now causing a crash on all software relying on it. Kaffeine version: 1.3-git VLC version: 2.1.5 Rincewind Nautilus version: 3.10.1 Totem : 3.10.1 With Kaffeine and VLC I get a stack trace that looks like that: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fdeb2847700 (LWP 29065)] 0x7fdef766849a in ?? () from /usr/lib/libvlccore.so.7 (gdb) bt #0 0x7fdef766849a in ?? () from /usr/lib/libvlccore.so.7 #1 0x7fdef766a519 in ?? () from /usr/lib/libvlccore.so.7 #2 0x7fdef7ee9182 in start_thread (arg=0x7fdeb2847700) at pthread_create.c:312 #3 0x7fdef7a1230d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111 And on Nautilus I get a different one: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7f499318e700 (LWP 8826)] 0x7f49ac14bf12 in ?? () from /usr/lib/x86_64-linux-gnu/gstreamer-1.0/libgstlibav.so (gdb) bt #0 0x7f49ac14bf12 in ?? () from /usr/lib/x86_64-linux-gnu/gstreamer-1.0/libgstlibav.so #1 0x7f49ac14c671 in ?? () from /usr/lib/x86_64-linux-gnu/gstreamer-1.0/libgstlibav.so #2 0x7f49cce8fc73 in ?? () from /usr/lib/x86_64-linux-gnu/libgstaudio-1.0.so.0 #3 0x7f49cce9004b in ?? () from /usr/lib/x86_64-linux-gnu/libgstaudio-1.0.so.0 #4 0x7f49cce91036 in ?? () from /usr/lib/x86_64-linux-gnu/libgstaudio-1.0.so.0 #5 0x7f49cd791d08 in ?? () from /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so.0 #6 0x7f49c3bc82a9 in ?? () from /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 #7 0x7f49cd791d08 in ?? () from /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so.0 #8 0x7f49c3baab09 in gst_base_parse_push_frame () from /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 #9 0x7f49c3bae1c3 in gst_base_parse_finish_frame () from /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 #10 0x7f49ac373c33 in ?? () from /usr/lib/x86_64-linux-gnu/gstreamer-1.0/libgstaudioparsers.so #11 0x7f49c3ba81e4 in ?? () from /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 #12 0x7f49c3bab74a in ?? () from /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 #13 0x7f49cd791d08 in ?? () from /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so.0 #14 0x7f49ae35da23 in ?? () from /usr/lib/x86_64-linux-gnu/gstreamer-1.0/libgstcoreelements.so #15 0x7f49cd7bf549 in ?? () from /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so.0 #16 0x7f49df50989c in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #17 0x7f49df508f15 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #18 0x7f49ded64182 in start_thread (arg=0x7f499318e700) at pthread_create.c:312 #19 0x7f49dea9130d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1324243/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 508063] Re: Please warn the user when VPN is disconnected
** Changed in: network-manager Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/508063 Title: Please warn the user when VPN is disconnected Status in NetworkManager: Fix Released Status in “network-manager” package in Ubuntu: Triaged Bug description: Binary package hint: network-manager I sometimes use VPN for security reasons. I connect to an (insecure) WLAN or ethernet internet uplink and then tunnel all my traffic through VPN. Generally, this works fine using Network manager. For various reasons though, this connection can drop at times (Flakey WLAN, Re-plugging a cable, and so forth). While Network-Manager notifies me of this using the notification system, BY DEFAULT it reconnects to the WLAN or ethernet and tunnels everything through that. There should be a are you sure? clickbox before this happens! Thank you! To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/508063/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1374871] Re: upgrade from 0.2.91.6 to 0.2.91.7 breaks my X.org (nvidia)
I've recently upgraded my ubuntu to 14.10 and problem also occurred. I've removed bumblebee and primus (just remove not purge) and it didn't help. Downgrading ubuntu-drivers-common to 0.2.91.4 also failed. But I've found out that my X.org is complaining about missing nvidia module, and indeed there was no such file in /usr/lib/xorg/modules/drivers. Re-installing nvidia-331 did not helped. So I simply copied nvidia_drv.so to drivers and libglx* to /usr/lib and it now works! Although it lacks hardware acceleration but I'm able to finish my work for now. Maybe somebody will guide me - which package is responsible for linking appropriate nvidia_drv.so to X.org modules? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1374871 Title: upgrade from 0.2.91.6 to 0.2.91.7 breaks my X.org (nvidia) Status in “ubuntu-drivers-common” package in Ubuntu: New Bug description: After upgrading to version 0.2.91.7 my X.org stopped working - it could not find nvidia drivers. Downgrading to 0.2.91.4 (from releease) fixes this problem. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1374871/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1027410] Re: Crash when opening a WMV file
** Changed in: vlc (Ubuntu) Status: Confirmed = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libav in Ubuntu. https://bugs.launchpad.net/bugs/1027410 Title: Crash when opening a WMV file Status in “libav” package in Ubuntu: Confirmed Status in “vlc” package in Ubuntu: Invalid Bug description: There is a WMV file I am trying to play but VLC crashes when I open it : VLC media player 2.0.1 Twoflower (revision 2.0.1-0-gf432547) [0x9cbd908] main libvlc: Lancement de vlc avec l'interface par défaut. Utilisez « cvlc » pour démarrer VLC sans interface. [vc1 @ 0xb5304200] Bits overconsumption: 102040 102032 [vc1 @ 0xb5304200] concealing 837 DC, 837 AC, 837 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 22776 22768 [vc1 @ 0xb5304200] concealing 980 DC, 980 AC, 980 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 74392 74384 [vc1 @ 0xb5304200] concealing 366 DC, 366 AC, 366 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 39104 39096 at 38x19 [vc1 @ 0xb5304200] concealing 369 DC, 369 AC, 369 MV errors [0xb5100618] main input error: ES_OUT_SET_(GROUP_)PCR is called too late (pts_delay increased to 300 ms) [0xb5100618] main input error: ES_OUT_RESET_PCR called [wmav2 @ 0xb5322a20] prev_block_len_bits 6 out of range [wmav2 @ 0xb5322a20] next_block_len_bits 5 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 4 out of range [wmav2 @ 0xb5322a20] block_len_bits 6 out of range [vc1 @ 0xb5304200] Bits overconsumption: 94824 94816 [vc1 @ 0xb5304200] concealing 1004 DC, 1004 AC, 1004 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 69064 69056 [vc1 @ 0xb5304200] concealing 630 DC, 630 AC, 630 MV errors [wmav2 @ 0xb5322a20] prev_block_len_bits 6 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 4 out of range [wmav2 @ 0xb5322a20] frame_len overflow [wmav2 @ 0xb5322a20] prev_block_len_bits 4 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 5 out of range [wmav2 @ 0xb5322a20] overflow in spectral RLE, ignoring [wmav2 @ 0xb5322a20] next_block_len_bits 5 out of range [wmav2 @ 0xb5322a20] next_block_len_bits 5 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 5 out of range [wmav2 @ 0xb5322a20] next_block_len_bits 4 out of range [wmav2 @ 0xb5322a20] block_len_bits 5 out of range [wmav2 @ 0xb5322a20] block_len_bits 6 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 6 out of range [wmav2 @ 0xb5322a20] prev_block_len_bits 4 out of range [wmav2 @ 0xb5322a20] block_len_bits 4 out of range [wmav2 @ 0xb5322a20] next_block_len_bits 4 out of range [vc1 @ 0xb5304200] Bits overconsumption: 80344 80336 [vc1 @ 0xb5304200] concealing 411 DC, 411 AC, 411 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 61368 61360 [vc1 @ 0xb5304200] concealing 753 DC, 753 AC, 753 MV errors [vc1 @ 0xb5304200] Bits overconsumption: 53624 53616 at 0x22 [vc1 @ 0xb5304200] concealing 229 DC, 229 AC, 229 MV errors Erreur de segmentation (core dumped) ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: vlc 2.0.1-4 ProcVersionSignature: Ubuntu 3.2.0-26.41-generic-pae 3.2.19 Uname: Linux 3.2.0-26-generic-pae i686 ApportVersion: 2.0.1-0ubuntu11 Architecture: i386 Date: Sat Jul 21 16:00:32 2012 ProcEnviron: LANGUAGE=fr_FR:en TERM=xterm PATH=(custom, no user) LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: vlc UpgradeStatus: Upgraded to precise on 2012-04-27 (85 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libav/+bug/1027410/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1187896] Re: Launcher cannot be reached in 'auto-hide' mode with Touchscreen
The gesture for opening the hidden launcher in Unity 7 is a four-finger horizontal swipe (see https://wiki.ubuntu.com/Multitouch for more gestures). This works well on all of my test hardware. We have no plans to retrofit Unity 8 UI designs onto Unity 7. ** Changed in: unity (Ubuntu) Status: Confirmed = Won't Fix ** Changed in: unity Status: New = Won't Fix -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1187896 Title: Launcher cannot be reached in 'auto-hide' mode with Touchscreen Status in Unity: Won't Fix Status in “unity” package in Ubuntu: Won't Fix Bug description: Ubuntu 13.04, 3.8.0-24-generic When launcher is in 'auto-hide' mode, it appears to be inaccessible when solely using Touchscreen input to slide, or even tap, the farthest edge of the screen (whether left, or top-left is selected). I've adjusted the sensitivity all the way down to the Highest, but it still does not appear. Instead, it appears to hold focus on whatever application is currently on top. In the situation where no apps are open/near the hotspot, it is assumed I am either simply tapping the desktop, or attempting to drag-highlight a group selection instead. It should be noted that the cursor appears on the far edge, as I would expect typical mouse behavior to emulate bringing the Launcher into view. To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1187896/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390466] Re: Evolution fail to decode TNEF attachments
Existing matching bug in Gnome bugzilla : https://bugzilla.gnome.org/show_bug.cgi?id=700778 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/1390466 Title: Evolution fail to decode TNEF attachments Status in Ubuntu GNOME: New Status in “evolution” package in Ubuntu: New Bug description: When receiving an email from user using outlook, the attached files are grouped all in one tnef file. The content-type of this part of the email is as below: Content-Type: application/ms-tnef; name=winmail.dat Old version of evolution decode correctly this kind of email up to version 3.4.0 of evolution when TNEF attachement are handled bu evolution plug-ins. At this time, the TNEF plugin handle mime_type = application/ms-tnef and application/vnd.ms-tnef. Since this commit for evolution 3.5, https://git.gnome.org/browse/evolution/commit/?id=931191474643164e96b5778c790e42cca517e729, the mime_type handled by the TNEF module are application/ms-tnefl and application/vnd.ms-tnef. There is an additionnal letter 'l' that prevent this module from working correctly!!! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-gnome/+bug/1390466/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390466] Re: Evolution fail to decode TNEF attachments
After patched the binary file directly with the following command, it's work again!!! sudo sed -i 's#application/ms-tnefl#application/ms-tnef\x00#' /usr/lib/evolution/3.10/modules/module-tnef-attachment.so ** Bug watch added: GNOME Bug Tracker #700778 https://bugzilla.gnome.org/show_bug.cgi?id=700778 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/1390466 Title: Evolution fail to decode TNEF attachments Status in Ubuntu GNOME: New Status in “evolution” package in Ubuntu: New Bug description: When receiving an email from user using outlook, the attached files are grouped all in one tnef file. The content-type of this part of the email is as below: Content-Type: application/ms-tnef; name=winmail.dat Old version of evolution decode correctly this kind of email up to version 3.4.0 of evolution when TNEF attachement are handled bu evolution plug-ins. At this time, the TNEF plugin handle mime_type = application/ms-tnef and application/vnd.ms-tnef. Since this commit for evolution 3.5, https://git.gnome.org/browse/evolution/commit/?id=931191474643164e96b5778c790e42cca517e729, the mime_type handled by the TNEF module are application/ms-tnefl and application/vnd.ms-tnef. There is an additionnal letter 'l' that prevent this module from working correctly!!! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-gnome/+bug/1390466/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390508] [NEW] Lightdm asks for wireless password for eduroam on each start
Public bug reported: 1) The release of Ubuntu you are using, via 'lsb_release -rd' or System - About Ubuntu: Happens on Ubuntu 14.04 amd64, Ubuntu 14.10 amd64 2) The version of the package you are using, via 'apt-cache policy pkgname' or by checking in Software Center uptodate 14.10 package 3) What you expected to happen Save the password of the wireless eduroam (PEAP/MSCHAPv2 without CA certificate) network when entered on lightdm 4) What happened instead The problem I have is connected with my university's eduroam wireless network. When I connect to it the first time I have to choose PEAP and MSCHAPv2, when I want to save the connection it tells about the missing CA certificate, so I tell it to ignore it. This works fine but when I start up the system in lightdm I get asked to reinsert the password of the eduroam connection, but even when I insert the password and click on ignore the CA certificate message I have to do this procedure on each restart of the system. I'm not alone with this problem: http://askubuntu.com/questions/516406/ubuntu-14-04-disable-automatic- network-connection-until-after-login / https://bugs.launchpad.net/ubuntu/+source/network-manager- applet/+bug/1104476/comments/156 - So my problem is somehow related to this bugreport ( https://bugs.launchpad.net/ubuntu/+source/network- manager-applet/+bug/1104476 ), when ignoring the CA certificate message it will connect but not save the password at the login-screen. So how do I get rid of this nagging request at each login? A user on askubuntu.com told me to file a bug report ( http://askubuntu.com/questions/546837/lightdm-asks-for-wireless- password-for-eduroam-on-each-start ) ** Affects: network-manager-applet (Ubuntu) Importance: Undecided Status: New ** Tags: eduroam wireless ** Description changed: 1) The release of Ubuntu you are using, via 'lsb_release -rd' or System - About Ubuntu: Happens on Ubuntu 14.04 amd64, Ubuntu 14.10 amd64 2) The version of the package you are using, via 'apt-cache policy pkgname' or by checking in Software Center uptodate 14.10 package 3) What you expected to happen - Save the password of the wireless eduroam (PEAP/MSCHAPv2 without CA certificate) network when entered on lightdm + Save the password of the wireless eduroam (PEAP/MSCHAPv2 without CA certificate) network when entered on lightdm 4) What happened instead The problem I have is connected with my university's eduroam wireless network. When I connect to it the first time I have to choose PEAP and MSCHAPv2, when I want to save the connection it tells about the missing CA certificate, so I tell it to ignore it. This works fine but when I start up the system in lightdm I get asked to reinsert the password of the eduroam connection, but even when I insert the password and click on ignore the CA certificate message I have to do this procedure on each restart of the system. I'm not alone with this problem: + http://askubuntu.com/questions/516406/ubuntu-14-04-disable-automatic- + network-connection-until-after-login / https://bugs.launchpad.net/ubuntu/+source/network-manager- - applet/+bug/1104476/comments/156 So my problem is somehow related to + applet/+bug/1104476/comments/156 - So my problem is somehow related to this bugreport ( https://bugs.launchpad.net/ubuntu/+source/network- manager-applet/+bug/1104476 ), when ignoring the CA certificate message it will connect but not save the password at the login-screen. So how do I get rid of this nagging request at each login? A user on askubuntu.com told me to file a bug report ( http://askubuntu.com/questions/546837/lightdm-asks-for-wireless- password-for-eduroam-on-each-start ) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager-applet in Ubuntu. https://bugs.launchpad.net/bugs/1390508 Title: Lightdm asks for wireless password for eduroam on each start Status in “network-manager-applet” package in Ubuntu: New Bug description: 1) The release of Ubuntu you are using, via 'lsb_release -rd' or System - About Ubuntu: Happens on Ubuntu 14.04 amd64, Ubuntu 14.10 amd64 2) The version of the package you are using, via 'apt-cache policy pkgname' or by checking in Software Center uptodate 14.10 package 3) What you expected to happen Save the password of the wireless eduroam (PEAP/MSCHAPv2 without CA certificate) network when entered on lightdm 4) What happened instead The problem I have is connected with my university's eduroam wireless network. When I connect to it the first time I have to choose PEAP and MSCHAPv2, when I want to save the connection it tells about the missing CA certificate, so I tell it to ignore it. This works fine but when I start up the system in lightdm I get asked to reinsert the password of the eduroam connection, but even when I insert the password and click on ignore the CA certificate
[Desktop-packages] [Bug 1390022] Re: “Allow different input sources per window” is broken in Ubuntu 14.10 gnome-session-fallback and Compiz
** Package changed: gnome-panel (Ubuntu) = compiz (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to compiz in Ubuntu. https://bugs.launchpad.net/bugs/1390022 Title: “Allow different input sources per window” is broken in Ubuntu 14.10 gnome-session-fallback and Compiz Status in “compiz” package in Ubuntu: New Bug description: I installed Ubuntu 14.10 and then installed gnome-session-fallback. Then I configured 2 input sources and enabled Allow different input sources per window. It works fine in Metacity but in Compiz layout is changed globally, completelly ignoring different sources for each window setting. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: gnome-session-fallback 1:3.8.1-2ubuntu4 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: Unity Date: Thu Nov 6 11:39:41 2014 GsettingsChanges: b'org.gnome.gnome-panel.run-dialog' b'history' b['audacious', 'mate', 'keepassx', 'audacious', 'skype', 'pidgin', 'audacious', 'skype', 'audacious', 'pidgin', '/usr/lib/x86_64-linux-gnu/indicator-application/indicator-application-service', 'clipit', 'parcellite', 'nautilus', 'pidgin', 'skype', 'gnome-session-quit', 'ccsm', 'keepassx', 'skype'] InstallationDate: Installed on 2014-10-21 (15 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) PackageArchitecture: all SourcePackage: gnome-panel UpgradeStatus: Upgraded to utopic on 2014-10-30 (7 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/1390022/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1264368] Re: GLib-CRITICAL **: Source ID was not found when attempting to remove it - warning when leaving Network menu of g-c-c
(Android SDK Manager:8715): GLib-CRITICAL **: Source ID 684 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 782 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 1464 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 1493 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 1603 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 1887 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 3106 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 3207 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 3584 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 3794 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 3892 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 4204 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 4541 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 4806 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 4814 was not found when attempting to remove it (Android SDK Manager:8715): GLib-CRITICAL **: Source ID 4817 was not found when attempting to remove it martijn@martijn-Ubuntu:~/workspace/Android/android-sdk-linux/tools$ ./android (Android SDK Manager:8887): GLib-CRITICAL **: Source ID 968 was not found when attempting to remove it (Android SDK Manager:8887): GLib-CRITICAL **: Source ID 1229 was not found when attempting to remove it ** Also affects: androidsdk Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1264368 Title: GLib-CRITICAL **: Source ID was not found when attempting to remove it - warning when leaving Network menu of g-c-c Status in AndroidSDK enviorment install: New Status in GNOME Control Center: Incomplete Status in “gnome-control-center” package in Ubuntu: Triaged Bug description: Steps to recreate: 1. Open gnome-control-center in terminal. 2. Go to Network. 3. Go back to All preferences. 4. Notice that in terminal there is a warning: $ gnome-control-center (gnome-control-center:13519): GLib-CRITICAL **: Source ID 166 was not found when attempting to remove it ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gnome-control-center 1:3.6.3-0ubuntu49 ProcVersionSignature: Ubuntu 3.12.0-7.15-generic 3.12.4 Uname: Linux 3.12.0-7-generic x86_64 ApportVersion: 2.12.7-0ubuntu3 Architecture: amd64 CurrentDesktop: GNOME Date: Thu Dec 26 21:03:52 2013 InstallationDate: Installed on 2013-10-15 (71 days ago) InstallationMedia: Ubuntu-GNOME 13.10 Saucy Salamander - Release amd64 (20131015) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=pl_PL.UTF-8 SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: Upgraded to trusty on 2013-11-05 (51 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/androidsdk/+bug/1264368/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390514] [NEW] Incorrect page margins for HP Officejet 6700 Premium
Public bug reported: Using default Ubuntu ppd a ~1cm margin is added to the top of every page. Fixed by installing latest hplip from HP ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: hplip 3.14.3-0ubuntu3.2 [modified: usr/lib/cups/backend/hp usr/lib/cups/filter/hpps usr/lib/cups/filter/pstotiff usr/lib/python2.7/dist-packages/cupsext.la usr/lib/python2.7/dist-packages/cupsext.so usr/lib/python2.7/dist-packages/hpmudext.la usr/lib/python2.7/dist-packages/hpmudext.so usr/lib/python2.7/dist-packages/pcardext.la usr/lib/python2.7/dist-packages/pcardext.so usr/lib/python2.7/dist-packages/scanext.la usr/lib/python2.7/dist-packages/scanext.so] ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CurrentDesktop: Unity Date: Fri Nov 7 15:57:28 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-17 (174 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) Lpstat: device for HP-Officejet-6700: hp:/net/Officejet_6700?ip=192.168.1.10 device for Officejet_6700_fax: hpfax:/net/Officejet_6700?ip=192.168.1.10 device for Officejet_6700x2: hp:/net/Officejet_6700?ip=192.168.1.10 device for Officejet_6700x3: hp:/net/Officejet_6700?ip=192.168.1.10 MachineType: LENOVO 20334 Papersize: a4 PpdFiles: Officejet_6700x3: HP Officejet 6700, hpcups 3.14.10 HP-Officejet-6700: HP Officejet 6700, hpcups 3.14.3 Officejet_6700x2: HP Officejet 6700, hpcups 3.14.3 Officejet_6700_fax: HP Fax4 hpcups ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=dd7609c8-4868-41ba-8527-15a3d743d292 ro quiet splash vt.handoff=7 SourcePackage: hplip UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/14/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 94CN05WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Strawberry 5E dmi.board.vendor: LENOVO dmi.board.version: 3193Std dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo Ideapad Flex 15D dmi.modalias: dmi:bvnLENOVO:bvr94CN05WW:bd10/14/2013:svnLENOVO:pn20334:pvrLenovoIdeapadFlex15D:rvnLENOVO:rnStrawberry5E:rvr3193Std:cvnLENOVO:ct10:cvrLenovoIdeapadFlex15D: dmi.product.name: 20334 dmi.product.version: Lenovo Ideapad Flex 15D dmi.sys.vendor: LENOVO ** Affects: hplip (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1390514 Title: Incorrect page margins for HP Officejet 6700 Premium Status in “hplip” package in Ubuntu: New Bug description: Using default Ubuntu ppd a ~1cm margin is added to the top of every page. Fixed by installing latest hplip from HP ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: hplip 3.14.3-0ubuntu3.2 [modified: usr/lib/cups/backend/hp usr/lib/cups/filter/hpps usr/lib/cups/filter/pstotiff usr/lib/python2.7/dist-packages/cupsext.la usr/lib/python2.7/dist-packages/cupsext.so usr/lib/python2.7/dist-packages/hpmudext.la usr/lib/python2.7/dist-packages/hpmudext.so usr/lib/python2.7/dist-packages/pcardext.la usr/lib/python2.7/dist-packages/pcardext.so usr/lib/python2.7/dist-packages/scanext.la usr/lib/python2.7/dist-packages/scanext.so] ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CurrentDesktop: Unity Date: Fri Nov 7 15:57:28 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-17 (174 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) Lpstat: device for HP-Officejet-6700: hp:/net/Officejet_6700?ip=192.168.1.10 device for Officejet_6700_fax: hpfax:/net/Officejet_6700?ip=192.168.1.10 device for Officejet_6700x2: hp:/net/Officejet_6700?ip=192.168.1.10 device for Officejet_6700x3: hp:/net/Officejet_6700?ip=192.168.1.10 MachineType: LENOVO 20334 Papersize: a4 PpdFiles: Officejet_6700x3: HP Officejet 6700, hpcups 3.14.10 HP-Officejet-6700: HP Officejet 6700, hpcups 3.14.3 Officejet_6700x2: HP Officejet 6700, hpcups 3.14.3 Officejet_6700_fax: HP Fax4 hpcups ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=dd7609c8-4868-41ba-8527-15a3d743d292 ro quiet splash vt.handoff=7 SourcePackage: hplip UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/14/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 94CN05WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Strawberry 5E dmi.board.vendor: LENOVO dmi.board.version: 3193Std dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo Ideapad Flex 15D dmi.modalias:
[Desktop-packages] [Bug 1341241] Re: unable to clone mac address
*** This bug is a duplicate of bug 1320752 *** https://bugs.launchpad.net/bugs/1320752 ** This bug has been marked a duplicate of bug 1320752 after upgrading to 14.04 wireless mac spoofing wont work -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1341241 Title: unable to clone mac address Status in “network-manager” package in Ubuntu: New Bug description: I am unable to spoof a mac address using either the command line, or editing a network connection with the gui. I have not tried using a program such as macchanger, but according to this post on the forums (http://ubuntuforums.org/showthread.php?t=2221802) that doesn't work either. When I try to access my network (using wifi), it tries, but ultimately fails to connect. When I connect to different network without a spoofed mac address, it connects perfectly. p.s. I have the same problem on my rooted android smartphone running 4.4 kitkat. It used to work fine on 4.2, but spoofing hasn't worked since I updated. 1 Ubuntu 14.04 2 network-manager version: 0.9.8.8-0ubuntu7 3 Connect to the network with a spoofed mac address 4 Connection is rejected b/c of mac address filtering (computer reports mac as spoofed, router sees original address) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1341241/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 982546] Re: soffice.bin crashed with SIGSEGV in exit()
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: libreoffice (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/982546 Title: soffice.bin crashed with SIGSEGV in exit() Status in “libreoffice” package in Ubuntu: Incomplete Bug description: Crashed at startup after desktop freeze (thank you unity3D). ProblemType: Crash DistroRelease: Ubuntu 12.04 Package: libreoffice-core 1:3.5.2-2ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 ApportVersion: 2.0.1-0ubuntu2 Architecture: amd64 Date: Sat Apr 14 00:26:43 2012 Disassembly: = 0x7fb597074c90: Cannot access memory at address 0x7fb597074c90 ExecutablePath: /usr/lib/libreoffice/program/soffice.bin ExecutableTimestamp: 1334087811 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110425) ProcCmdline: /usr/lib/libreoffice/program/soffice.bin --calc /home/alex/Dropbox/exptrader/backtests.ods --splash-pipe=6 ProcCwd: /home/alex SegvAnalysis: Segfault happened at: 0x7fb597074c90:Cannot access memory at address 0x7fb597074c90 PC (0x7fb597074c90) not located in a known VMA region (needed executable region)! Stack memory exhausted (SP below stack segment) SegvReason: executing unknown VMA Signal: 11 SourcePackage: libreoffice StacktraceTop: ?? () ?? () from /lib/x86_64-linux-gnu/libc.so.6 exit () from /lib/x86_64-linux-gnu/libc.so.6 ?? () from /usr/lib/x86_64-linux-gnu/libgdk-x11-2.0.so.0 _XIOError () from /usr/lib/x86_64-linux-gnu/libX11.so.6 Title: soffice.bin crashed with SIGSEGV in exit() UpgradeStatus: Upgraded to precise on 2012-03-08 (36 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare users vboxusers To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/982546/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 982546] Re: soffice.bin crashed with SIGSEGV in exit()
Does anyone still experience this issue with the latest LibreOffice updates on 12.04? ** Changed in: libreoffice (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/982546 Title: soffice.bin crashed with SIGSEGV in exit() Status in “libreoffice” package in Ubuntu: Incomplete Bug description: Crashed at startup after desktop freeze (thank you unity3D). ProblemType: Crash DistroRelease: Ubuntu 12.04 Package: libreoffice-core 1:3.5.2-2ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 ApportVersion: 2.0.1-0ubuntu2 Architecture: amd64 Date: Sat Apr 14 00:26:43 2012 Disassembly: = 0x7fb597074c90: Cannot access memory at address 0x7fb597074c90 ExecutablePath: /usr/lib/libreoffice/program/soffice.bin ExecutableTimestamp: 1334087811 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110425) ProcCmdline: /usr/lib/libreoffice/program/soffice.bin --calc /home/alex/Dropbox/exptrader/backtests.ods --splash-pipe=6 ProcCwd: /home/alex SegvAnalysis: Segfault happened at: 0x7fb597074c90:Cannot access memory at address 0x7fb597074c90 PC (0x7fb597074c90) not located in a known VMA region (needed executable region)! Stack memory exhausted (SP below stack segment) SegvReason: executing unknown VMA Signal: 11 SourcePackage: libreoffice StacktraceTop: ?? () ?? () from /lib/x86_64-linux-gnu/libc.so.6 exit () from /lib/x86_64-linux-gnu/libc.so.6 ?? () from /usr/lib/x86_64-linux-gnu/libgdk-x11-2.0.so.0 _XIOError () from /usr/lib/x86_64-linux-gnu/libX11.so.6 Title: soffice.bin crashed with SIGSEGV in exit() UpgradeStatus: Upgraded to precise on 2012-03-08 (36 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare users vboxusers To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/982546/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390526] [NEW] Merge with Debian 1.1.1-1
Public bug reported: patch for vte 2.91 ** Affects: remmina (Ubuntu) Importance: Undecided Assignee: Iain Lane (laney) Status: In Progress ** Tags: upgrade-software-version ** Changed in: remmina (Ubuntu) Status: New = In Progress ** Changed in: remmina (Ubuntu) Assignee: (unassigned) = Iain Lane (laney) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to remmina in Ubuntu. https://bugs.launchpad.net/bugs/1390526 Title: Merge with Debian 1.1.1-1 Status in “remmina” package in Ubuntu: In Progress Bug description: patch for vte 2.91 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/remmina/+bug/1390526/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1320752] Re: after upgrading to 14.04 wireless mac spoofing wont work
This bug persists in 14.10 and affects all Ubuntu based distributions As far as i can tell it the Cloned MAC address feature is just broken, the type of WiFi adapter or any other settings are irrelevant. http://ubuntuforums.org/showthread.php?t=2221802 The bug has been around for 7 months, it has me looking into switching to a different distro at this point. How do we get it fixed? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1320752 Title: after upgrading to 14.04 wireless mac spoofing wont work Status in “network-manager” package in Ubuntu: Confirmed Bug description: after setting the mac to change in networkmanager i try to connect yet it never will, when looking at the logs it says it got disconnected by local choice (reason 3), it appeared it was because the mac wasnt effectively changed but then again i tried to do so disabling network-manager - macchanger -m - enabling network-manager, i checked with ifconfig if the mac has changed and it did however the result was the same maybe its because of this http://people.canonical.com/~ubuntu-security/cve/2013/CVE-2013-4579.html? **UPDATE** now works doing the macchanger procedure, directly from network- manager it doesnt ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-release-upgrader-core 1:0.220.2 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: KDE Date: Mon May 19 02:00:41 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-06 (12 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: release-upgrade UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 14.04 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-06 (13 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Hewlett-Packard HP Pavilion g7 Notebook PC NonfreeKernelModules: fglrx Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=UUID=b249fe00-d117-42dc-a2a4-e2b8763b5b7c ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 RelatedPackageVersions: linux-restricted-modules-3.13.0-24-generic N/A linux-backports-modules-3.13.0-24-generic N/A linux-firmware 1.127.2 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: trusty Uname: Linux 3.13.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/24/2012 dmi.bios.vendor: Insyde dmi.bios.version: F.53 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3568 dmi.board.vendor: Hewlett-Packard dmi.board.version: 21.3A dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.53:bd10/24/2012:svnHewlett-Packard:pnHPPaviliong7NotebookPC:pvr06901320461620100:rvnHewlett-Packard:rn3568:rvr21.3A:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion g7 Notebook PC dmi.product.version: 06901320461620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1320752/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1320752] Re: after upgrading to 14.04 wireless mac spoofing wont work
mint 17 discussion, same issue http://forums.linuxmint.com/viewtopic.php?f=157t=179147 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1320752 Title: after upgrading to 14.04 wireless mac spoofing wont work Status in “network-manager” package in Ubuntu: Confirmed Bug description: after setting the mac to change in networkmanager i try to connect yet it never will, when looking at the logs it says it got disconnected by local choice (reason 3), it appeared it was because the mac wasnt effectively changed but then again i tried to do so disabling network-manager - macchanger -m - enabling network-manager, i checked with ifconfig if the mac has changed and it did however the result was the same maybe its because of this http://people.canonical.com/~ubuntu-security/cve/2013/CVE-2013-4579.html? **UPDATE** now works doing the macchanger procedure, directly from network- manager it doesnt ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-release-upgrader-core 1:0.220.2 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: KDE Date: Mon May 19 02:00:41 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-06 (12 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: release-upgrade UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 14.04 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-06 (13 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Hewlett-Packard HP Pavilion g7 Notebook PC NonfreeKernelModules: fglrx Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=UUID=b249fe00-d117-42dc-a2a4-e2b8763b5b7c ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 RelatedPackageVersions: linux-restricted-modules-3.13.0-24-generic N/A linux-backports-modules-3.13.0-24-generic N/A linux-firmware 1.127.2 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: trusty Uname: Linux 3.13.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/24/2012 dmi.bios.vendor: Insyde dmi.bios.version: F.53 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3568 dmi.board.vendor: Hewlett-Packard dmi.board.version: 21.3A dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.53:bd10/24/2012:svnHewlett-Packard:pnHPPaviliong7NotebookPC:pvr06901320461620100:rvnHewlett-Packard:rn3568:rvr21.3A:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion g7 Notebook PC dmi.product.version: 06901320461620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1320752/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390466] Re: Evolution fail to decode TNEF attachments
The attachment Fix bad mime_type seems to be a patch. If it isn't, please remove the patch flag from the attachment, remove the patch tag, and if you are a member of the ~ubuntu-reviewers, unsubscribe the team. [This is an automated message performed by a Launchpad user owned by ~brian-murray, for any issues please contact him.] ** Tags added: patch -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to evolution in Ubuntu. https://bugs.launchpad.net/bugs/1390466 Title: Evolution fail to decode TNEF attachments Status in Ubuntu GNOME: New Status in “evolution” package in Ubuntu: New Bug description: When receiving an email from user using outlook, the attached files are grouped all in one tnef file. The content-type of this part of the email is as below: Content-Type: application/ms-tnef; name=winmail.dat Old version of evolution decode correctly this kind of email up to version 3.4.0 of evolution when TNEF attachement are handled bu evolution plug-ins. At this time, the TNEF plugin handle mime_type = application/ms-tnef and application/vnd.ms-tnef. Since this commit for evolution 3.5, https://git.gnome.org/browse/evolution/commit/?id=931191474643164e96b5778c790e42cca517e729, the mime_type handled by the TNEF module are application/ms-tnefl and application/vnd.ms-tnef. There is an additionnal letter 'l' that prevent this module from working correctly!!! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-gnome/+bug/1390466/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1320752] Re: after upgrading to 14.04 (or 14.10) wireless mac spoofing wont work
** Summary changed: - after upgrading to 14.04 wireless mac spoofing wont work + after upgrading to 14.04 (or 14.10) wireless mac spoofing wont work -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1320752 Title: after upgrading to 14.04 (or 14.10) wireless mac spoofing wont work Status in “network-manager” package in Ubuntu: Confirmed Bug description: after setting the mac to change in networkmanager i try to connect yet it never will, when looking at the logs it says it got disconnected by local choice (reason 3), it appeared it was because the mac wasnt effectively changed but then again i tried to do so disabling network-manager - macchanger -m - enabling network-manager, i checked with ifconfig if the mac has changed and it did however the result was the same maybe its because of this http://people.canonical.com/~ubuntu-security/cve/2013/CVE-2013-4579.html? **UPDATE** now works doing the macchanger procedure, directly from network- manager it doesnt ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-release-upgrader-core 1:0.220.2 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: KDE Date: Mon May 19 02:00:41 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-06 (12 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: release-upgrade UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 14.04 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-06 (13 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Hewlett-Packard HP Pavilion g7 Notebook PC NonfreeKernelModules: fglrx Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=UUID=b249fe00-d117-42dc-a2a4-e2b8763b5b7c ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 RelatedPackageVersions: linux-restricted-modules-3.13.0-24-generic N/A linux-backports-modules-3.13.0-24-generic N/A linux-firmware 1.127.2 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: trusty Uname: Linux 3.13.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/24/2012 dmi.bios.vendor: Insyde dmi.bios.version: F.53 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3568 dmi.board.vendor: Hewlett-Packard dmi.board.version: 21.3A dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.53:bd10/24/2012:svnHewlett-Packard:pnHPPaviliong7NotebookPC:pvr06901320461620100:rvnHewlett-Packard:rn3568:rvr21.3A:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion g7 Notebook PC dmi.product.version: 06901320461620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1320752/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1378416] Re: [krillin] disable WiFi, Mobile Data not available
Everytime I add the debug stuff to this it doesn't seem to die I will try it again tonight and see if dies over the weekend and leave it on the one image -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1378416 Title: [krillin] disable WiFi, Mobile Data not available Status in “network-manager” package in Ubuntu: Incomplete Status in “ofono” package in Ubuntu: Incomplete Bug description: STEPS: 1. Install RTM88 on krillin 2. Use the system a litlle on wifi 3. Pull down the indicator network 4. Disable Wifi EXPECTED: I expect the system to seemless flip over to using 3g ACTUAL: I got no page (see screen shot) I tried pinging google and got ping: unknown host google.com ip route gave no feedback phablet@ubuntu-phablet:~$ nmcli dev DEVICE TYPE STATE /ril_1 gsm disconnected /ril_0 gsm connected wlan0 802-11-wireless unavailable Devices is correct. The debug.txt in comment #3 clearly shows that mobile data is connected via the list-modems output and list-contexts output. This output also agrees with the nmcli output which shows /ril_0 as connected. The smoking gun here looks to be the routing table, which is empty. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1378416/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1364630] Re: init: Error while reading from descriptor: Broken pipe
I can make it disappear, but I'm not sure what is the real cause : $ sudo sed -i s,or starting rc-sysinit,or spawned rc-sysinit, /etc/init/failsafe.conf A patch in failsafe.conf and its gone. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-304 in Ubuntu. https://bugs.launchpad.net/bugs/1364630 Title: init: Error while reading from descriptor: Broken pipe Status in “nvidia-graphics-drivers-304” package in Ubuntu: Confirmed Bug description: [ 16.934379] init: Error while reading from descriptor: Broken pipe ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: init 1.20ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-11.16-generic 3.16.1 Uname: Linux 3.16.0-11-generic x86_64 ApportVersion: 2.14.7-0ubuntu1 Architecture: amd64 CurrentDesktop: GNOME Date: Tue Sep 2 17:23:15 2014 InstallationDate: Installed on 2014-04-27 (128 days ago) InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) SourcePackage: init-system-helpers UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-304/+bug/1364630/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1364630] Re: init: Error while reading from descriptor: Broken pipe
I don't have nvidia driver nor nvidia anything. This bugreport is in wrong place, it affects others as well, not the nvidia-driver. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-304 in Ubuntu. https://bugs.launchpad.net/bugs/1364630 Title: init: Error while reading from descriptor: Broken pipe Status in “nvidia-graphics-drivers-304” package in Ubuntu: Confirmed Bug description: [ 16.934379] init: Error while reading from descriptor: Broken pipe ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: init 1.20ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-11.16-generic 3.16.1 Uname: Linux 3.16.0-11-generic x86_64 ApportVersion: 2.14.7-0ubuntu1 Architecture: amd64 CurrentDesktop: GNOME Date: Tue Sep 2 17:23:15 2014 InstallationDate: Installed on 2014-04-27 (128 days ago) InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) SourcePackage: init-system-helpers UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-304/+bug/1364630/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1320752] Re: after upgrading to 14.04 (or 14.10) wireless mac spoofing wont work
** Description changed: + **SHORT OVERVIEW** + + + Cloned MAC Address feature doesn't work with any USB WiFi adapters + in 14.04, 14.10, Mint 17 and likely many others based on Ubuntu. + + This is not an upgrade issues, i did a clean install to test. + + The only symptoms are WiFi not connecting and the followinf dmesg + output: + + [ 214.296350] wlan0: authenticate with 98:fc:11:f2:f7:43 + [ 214.305098] wlan0: send auth to 98:fc:11:f2:f7:43 (try 1/3) + [ 214.307421] wlan0: authenticated + [ 219.367559] wlan0: deauthenticating from 98:fc:11:f2:f7:43 by local choice (reason=3) + + + + Original bug report info: + + after setting the mac to change in networkmanager i try to connect yet it never will, when looking at the logs it says it got disconnected by local choice (reason 3), it appeared it was because the mac wasnt effectively changed but then again i tried to do so disabling network-manager - macchanger -m - enabling network-manager, i checked with ifconfig if the mac has changed and it did however the result was the same maybe its because of this http://people.canonical.com/~ubuntu-security/cve/2013/CVE-2013-4579.html? **UPDATE** now works doing the macchanger procedure, directly from network-manager it doesnt ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-release-upgrader-core 1:0.220.2 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: KDE Date: Mon May 19 02:00:41 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-06 (12 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: release-upgrade UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 14.04 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-06 (13 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Hewlett-Packard HP Pavilion g7 Notebook PC NonfreeKernelModules: fglrx Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=UUID=b249fe00-d117-42dc-a2a4-e2b8763b5b7c ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 RelatedPackageVersions: linux-restricted-modules-3.13.0-24-generic N/A linux-backports-modules-3.13.0-24-generic N/A linux-firmware 1.127.2 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: trusty Uname: Linux 3.13.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/24/2012 dmi.bios.vendor: Insyde dmi.bios.version: F.53 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3568 dmi.board.vendor: Hewlett-Packard dmi.board.version: 21.3A dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.53:bd10/24/2012:svnHewlett-Packard:pnHPPaviliong7NotebookPC:pvr06901320461620100:rvnHewlett-Packard:rn3568:rvr21.3A:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion g7 Notebook PC dmi.product.version: 06901320461620100 dmi.sys.vendor: Hewlett-Packard ** Description changed: **SHORT OVERVIEW** - Cloned MAC Address feature doesn't work with any USB WiFi adapters - in 14.04, 14.10, Mint 17 and likely many others based on Ubuntu. + in 14.04, 14.10, Mint 17 and likely all others based on Ubuntu. This is not an upgrade issues, i did a clean install to test. The only symptoms are WiFi not connecting and the followinf dmesg output: [ 214.296350] wlan0: authenticate with 98:fc:11:f2:f7:43 [ 214.305098] wlan0: send auth to 98:fc:11:f2:f7:43 (try 1/3) [ 214.307421] wlan0: authenticated [ 219.367559] wlan0: deauthenticating from 98:fc:11:f2:f7:43 by local choice (reason=3) Original bug report info: - after setting the mac to change in networkmanager i try to connect yet it never will, when looking at the logs it says it got disconnected by local choice (reason 3), it appeared it was because the mac wasnt effectively changed but then again i tried to do so disabling network-manager - macchanger -m - enabling
[Desktop-packages] [Bug 1364630] Re: init: Error while reading from descriptor: Broken pipe
In my experience this bug will occur in Utopic (not in Trusty) upstart network initializaton, if DHCP is set ( not static ) It has nothing to do with the display drivers. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-304 in Ubuntu. https://bugs.launchpad.net/bugs/1364630 Title: init: Error while reading from descriptor: Broken pipe Status in “nvidia-graphics-drivers-304” package in Ubuntu: Confirmed Bug description: [ 16.934379] init: Error while reading from descriptor: Broken pipe ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: init 1.20ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-11.16-generic 3.16.1 Uname: Linux 3.16.0-11-generic x86_64 ApportVersion: 2.14.7-0ubuntu1 Architecture: amd64 CurrentDesktop: GNOME Date: Tue Sep 2 17:23:15 2014 InstallationDate: Installed on 2014-04-27 (128 days ago) InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) SourcePackage: init-system-helpers UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-304/+bug/1364630/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1320752] Re: MAC Spoofing / Cloning for WiFi is broken in Trusty 14.04 / 14.10 and all others including Mint 17
** Description changed: **SHORT OVERVIEW** Cloned MAC Address feature doesn't work with any USB WiFi adapters in 14.04, 14.10, Mint 17 and likely all others based on Ubuntu. This is not an upgrade issue, i did a clean install to test. + Atheros, Realtek, Ralink adapters tested, this has nothing to do with the driver type. The only symptoms are WiFi not connecting and the following dmesg output: [ 214.296350] wlan0: authenticate with 98:fc:11:f2:f7:43 [ 214.305098] wlan0: send auth to 98:fc:11:f2:f7:43 (try 1/3) [ 214.307421] wlan0: authenticated [ 219.367559] wlan0: deauthenticating from 98:fc:11:f2:f7:43 by local choice (reason=3) Original bug report info: after setting the mac to change in networkmanager i try to connect yet it never will, when looking at the logs it says it got disconnected by local choice (reason 3), it appeared it was because the mac wasnt effectively changed but then again i tried to do so disabling network-manager - macchanger -m - enabling network-manager, i checked with ifconfig if the mac has changed and it did however the result was the same maybe its because of this http://people.canonical.com/~ubuntu-security/cve/2013/CVE-2013-4579.html? **UPDATE** now works doing the macchanger procedure, directly from network-manager it doesnt ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubuntu-release-upgrader-core 1:0.220.2 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: KDE Date: Mon May 19 02:00:41 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-06 (12 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: release-upgrade UpgradeStatus: No upgrade log present (probably fresh install) --- ApportVersion: 2.14.1-0ubuntu3.1 Architecture: amd64 CurrentDesktop: KDE DistroRelease: Ubuntu 14.04 EcryptfsInUse: Yes InstallationDate: Installed on 2014-05-06 (13 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Hewlett-Packard HP Pavilion g7 Notebook PC NonfreeKernelModules: fglrx Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=UUID=b249fe00-d117-42dc-a2a4-e2b8763b5b7c ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 RelatedPackageVersions: linux-restricted-modules-3.13.0-24-generic N/A linux-backports-modules-3.13.0-24-generic N/A linux-firmware 1.127.2 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: trusty Uname: Linux 3.13.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 10/24/2012 dmi.bios.vendor: Insyde dmi.bios.version: F.53 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3568 dmi.board.vendor: Hewlett-Packard dmi.board.version: 21.3A dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.53:bd10/24/2012:svnHewlett-Packard:pnHPPaviliong7NotebookPC:pvr06901320461620100:rvnHewlett-Packard:rn3568:rvr21.3A:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion g7 Notebook PC dmi.product.version: 06901320461620100 dmi.sys.vendor: Hewlett-Packard ** Description changed: **SHORT OVERVIEW** Cloned MAC Address feature doesn't work with any USB WiFi adapters in 14.04, 14.10, Mint 17 and likely all others based on Ubuntu. + It worked under 13.10 and was broken from day one in 14.04+. This is not an upgrade issue, i did a clean install to test. Atheros, Realtek, Ralink adapters tested, this has nothing to do with the driver type. The only symptoms are WiFi not connecting and the following dmesg output: [ 214.296350] wlan0: authenticate with 98:fc:11:f2:f7:43 [ 214.305098] wlan0: send auth to 98:fc:11:f2:f7:43 (try 1/3) [ 214.307421] wlan0: authenticated [ 219.367559] wlan0: deauthenticating from 98:fc:11:f2:f7:43 by local choice (reason=3) Original bug report info: after setting the mac to change in networkmanager i try to connect yet it never will, when looking at the logs it says it got disconnected by local
[Desktop-packages] [Bug 1389858] Re: Libreoffice calc 4.2.7-0ubuntu1 not updating references after sort
Hi, this update broke several of my spreadsheets that I use regularly, and have been using even back with StarOffice, then OpenOffice and finally LibreOffice for years. While the Ubuntu patch makes it sort in some way different from the New LO way of updating References, it still breaks. This is a major break/change in functionality on an LTS platform and just should not happen(TM). For the time being, I have reverted the upgrade and put the libreoffice packages on hold using apt-mark. Regards Matthias -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1389858 Title: Libreoffice calc 4.2.7-0ubuntu1 not updating references after sort Status in “libreoffice” package in Ubuntu: Triaged Bug description: Update to LibreOffice 4.2.7 is causing incorrect sort behaviour in Calc. As initially reported here: http://www.reddit.com/r/Ubuntu/comments/2le7qu/libreoffice_calc_update_a_few_hours_ago_is_buggy/ Attached is sample Calc document. To reproduce, highlight B6 to E14, select Sort and sort by Column D, see that column E didn't get sorted. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: libreoffice (not installed) ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: Unity Date: Wed Nov 5 15:49:03 2014 InstallationDate: Installed on 2013-11-26 (344 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) SourcePackage: libreoffice UpgradeStatus: Upgraded to utopic on 2014-10-08 (27 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1389858/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390537] [NEW] gdm depends on evolution-data-server-common
You have been subscribed to a public bug: lsb_release -rd Description:Ubuntu 14.04.1 LTS Release:14.04 apt-cache policy gdm gdm: Εγκατεστημένα: 3.10.0.1-0ubuntu3 Υποψήφιο: 3.10.0.1-0ubuntu3 Πίνακας Έκδοσης: *** 3.10.0.1-0ubuntu3 0 500 http://gr.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages 100 /var/lib/dpkg/status uname -a Linux ilias-desktop 3.13.0-39-generic #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux evolution-data-server-common version 3.10.4-0ubuntu1.5 to totally remove evolution-data-server-common and/or requires removing also gdm. But since: The data server, called Evolution Data Server is responsible for managing mail, calendar, addressbook, tasks and memo information. why gdm depends on it? ** Affects: gdm (Ubuntu) Importance: Undecided Status: New -- gdm depends on evolution-data-server-common https://bugs.launchpad.net/bugs/1390537 You received this bug notification because you are a member of Desktop Packages, which is subscribed to gdm in Ubuntu. -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390537] Re: gdm depends on evolution-data-server-common
** Package changed: aptitude (Ubuntu) = gdm (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gdm in Ubuntu. https://bugs.launchpad.net/bugs/1390537 Title: gdm depends on evolution-data-server-common Status in “gdm” package in Ubuntu: New Bug description: lsb_release -rd Description: Ubuntu 14.04.1 LTS Release: 14.04 apt-cache policy gdm gdm: Εγκατεστημένα: 3.10.0.1-0ubuntu3 Υποψήφιο: 3.10.0.1-0ubuntu3 Πίνακας Έκδοσης: *** 3.10.0.1-0ubuntu3 0 500 http://gr.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages 100 /var/lib/dpkg/status uname -a Linux ilias-desktop 3.13.0-39-generic #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux evolution-data-server-common version 3.10.4-0ubuntu1.5 to totally remove evolution-data-server-common and/or requires removing also gdm. But since: The data server, called Evolution Data Server is responsible for managing mail, calendar, addressbook, tasks and memo information. why gdm depends on it? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm/+bug/1390537/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1350052] Re: Unity FTBFS - gcc 4.9
** Changed in: unity Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1350052 Title: Unity FTBFS - gcc 4.9 Status in Unity: Fix Released Status in “unity” package in Ubuntu: Fix Released Bug description: Confirmed gcc/g++ 4.9 causes this FTBFS [ 17%] Building CXX object UnityCore/CMakeFiles/unity-core-6.0.dir/GLibDBusProxy.cpp.o In file included from /home/bschaefer/src/unity/UnityCore/CheckOptionFilter.cpp:22:0: /home/bschaefer/src/unity/UnityCore/CheckOptionFilter.cpp:28:16: error: ‘nux::logging::Logger unity::dash::{anonymous}::logger()’ defined but not used [-Werror=unused-function] DECLARE_LOGGER(logger, unity.dash.filter.checkoption); ^ /usr/include/Nux-4.0/NuxCore/Logger.h:75:27: note: in definition of macro ‘DECLARE_LOGGER’ ::nux::logging::Logger logger() \ ^ In file included from /home/bschaefer/src/unity/UnityCore/Model-inl.h:23:0, from /home/bschaefer/src/unity/UnityCore/Model.h:107, from /home/bschaefer/src/unity/UnityCore/Filters.h:26, from /home/bschaefer/src/unity/UnityCore/Filter.cpp:21: /home/bschaefer/src/unity/UnityCore/Filter.cpp:35:16: error: ‘nux::logging::Logger unity::dash::{anonymous}::logger()’ defined but not used [-Werror=unused-function] DECLARE_LOGGER(logger, unity.dash.filter); ^ /usr/include/Nux-4.0/NuxCore/Logger.h:75:27: note: in definition of macro ‘DECLARE_LOGGER’ ::nux::logging::Logger logger() \ ^ cc1plus: all warnings being treated as errors UnityCore/CMakeFiles/unity-core-6.0.dir/build.make:169: recipe for target 'UnityCore/CMakeFiles/unity-core-6.0.dir/CheckOptionFilter.cpp.o' failed make[2]: *** [UnityCore/CMakeFiles/unity-core-6.0.dir/CheckOptionFilter.cpp.o] Error 1 make[2]: *** Waiting for unfinished jobs cc1plus: all warnings being treated as errors UnityCore/CMakeFiles/unity-core-6.0.dir/build.make:238: recipe for target 'UnityCore/CMakeFiles/unity-core-6.0.dir/Filter.cpp.o' failed make[2]: *** [UnityCore/CMakeFiles/unity-core-6.0.dir/Filter.cpp.o] Error 1 CMakeFiles/Makefile2:6381: recipe for target 'UnityCore/CMakeFiles/unity-core-6.0.dir/all' failed make[1]: *** [UnityCore/CMakeFiles/unity-core-6.0.dir/all] Error 2 Makefile:113: recipe for target 'all' failed make: *** [all] Error 2 To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1350052/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 953515] Re: compiz crashed with SIGSEGV in nux::WindowThread::GetWindowCompositor() from nux::BaseWindow::BaseWindow() from unity::dash::Controller::SetupWindow()
** No longer affects: nux (Ubuntu) ** No longer affects: nux ** No longer affects: unity/6.0 ** Changed in: unity (Ubuntu) Status: Confirmed = Fix Released ** Changed in: unity/5.0 Status: New = Incomplete ** Changed in: unity Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/953515 Title: compiz crashed with SIGSEGV in nux::WindowThread::GetWindowCompositor() from nux::BaseWindow::BaseWindow() from unity::dash::Controller::SetupWindow() Status in Unity: Fix Released Status in Unity 5.0 series: Incomplete Status in “unity” package in Ubuntu: Fix Released Bug description: Gconf-cleaner crashed as soon as I tried to save the original config ProblemType: Crash DistroRelease: Ubuntu 12.04 Package: libnux-2.0-0 2.6.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-18.29-generic-pae 3.2.9 Uname: Linux 3.2.0-18-generic-pae i686 ApportVersion: 1.94.1-0ubuntu2 Architecture: i386 Date: Mon Mar 12 18:45:29 2012 ExecutablePath: /usr/bin/compiz InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta i386 (20120301) ProcCmdline: compiz ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0xb45940c4 _ZNK3nux12WindowThread19GetWindowCompositorEv+4: mov0xdc(%eax),%eax PC (0xb45940c4) ok source 0xdc(%eax) (0x00dc) not located in a known VMA region (needed readable region)! destination %eax ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: nux StacktraceTop: nux::WindowThread::GetWindowCompositor() const () from /usr/lib/libnux-2.0.so.0 nux::BaseWindow::BaseWindow(char const*, char const*, int) () from /usr/lib/libnux-2.0.so.0 unity::dash::Controller::SetupWindow() () from /usr/lib/compiz/libunityshell.so unity::dash::Controller::EnsureDash() () from /usr/lib/compiz/libunityshell.so ?? () from /usr/lib/compiz/libunityshell.so Title: compiz crashed with SIGSEGV in nux::WindowThread::GetWindowCompositor() UpgradeStatus: Upgraded to precise on 2012-03-12 (0 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/953515/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 972390] Re: compiz crashed with SIGSEGV in ObjectPtrunity::launcher::LauncherIcon() from unity::launcher::LauncherIcon::EmitNeedsRedraw() from unity::launcher::LauncherIcon::
** Changed in: unity Status: Confirmed = Fix Released ** Changed in: unity (Ubuntu) Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/972390 Title: compiz crashed with SIGSEGV in ObjectPtrunity::launcher::LauncherIcon() from unity::launcher::LauncherIcon::EmitNeedsRedraw() from unity::launcher::LauncherIcon::OnDelayedUpdateTimeout() Status in Unity: Fix Released Status in “unity” package in Ubuntu: Fix Released Bug description: I was using ubuntu tweak, and config compiz to add mouse shortcuts like on the top left to show desktop. ProblemType: Crash DistroRelease: Ubuntu 12.04 Package: unity 5.8.0-0ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-21.34-generic 3.2.13 Uname: Linux 3.2.0-21-generic x86_64 ApportVersion: 2.0-0ubuntu3 Architecture: amd64 Date: Tue Apr 3 14:22:03 2012 Disassembly: = 0x1b0:Cannot access memory at address 0x1b0 ExecutablePath: /usr/bin/compiz InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120401) ProcCmdline: compiz SegvReason: executing NULL VMA Signal: 11 SourcePackage: unity Title: compiz crashed with SIGSEGV in unity::launcher::LauncherIcon::EmitNeedsRedraw() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/972390/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1389798] Re: Using Bluetooth PAN leaves broken resolv.conf
Okay, so now I verified that the nameserver was added to resolv.conf. Then I rechecked before disconnecting and noted that the extra resolv.conf entry had disappeared (without changes to network configuration in the meanwhile). nm-tool reported the correct nameserver address still, and it seemed to work through the local proxy (one presumes). So the generated resolv.conf entry seems both unnecessary and possibly transient, though as said, it has persisted beyond disconnecting the Bluetooth PAN at least two times. Everything working even without the entry indicates that it probably shouldn't be generated at all. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1389798 Title: Using Bluetooth PAN leaves broken resolv.conf Status in “network-manager” package in Ubuntu: New Bug description: Having paired an Android phone, the network manager menu in Unity displays the GT-I9300 Network appropriately and I can tether over the phone's mobile broadband just fine. However, the PAN's nameserver setting is put directly into /etc/resolv.conf (instead of doing the dnsmasq thing) _and_ is left there, like so, even after disconnecting and connecting to a different (WiFi) network: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.44.1 nameserver 127.0.1.1 (The 127.0.1.1 part isn't there before connecting to WiFi, it is added at that point, but the now-defunct BT PAN nameserver address persists.) This greatly interferes with DNS queries. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: network-manager 0.9.8.8-0ubuntu7 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDesktop: Unity Date: Wed Nov 5 19:23:27 2014 IpRoute: default via 192.168.0.1 dev wlan0 proto static 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.17 metric 9 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: nmcli-dev: DEVICE TYPE STATE DBUS-PATH 4C:BC:A5:EC:12:83 bluetooth disconnected /org/freedesktop/NetworkManager/Devices/4 wlan0 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.8.8connected enabled enabled enabledenabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1389798/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 982196] Re: compiz crashed with SIGSEGV in std::basic_stringchar, std::char_traitschar, std::allocatorchar ::basic_string() from operator() from operator!=nux::Property,
** Changed in: unity Status: Incomplete = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/982196 Title: compiz crashed with SIGSEGV in std::basic_stringchar, std::char_traitschar, std::allocatorchar ::basic_string() from operator() from operator!=nux::Property, std::basic_stringchar, std::basic_stringchar, std::basic_stringchar from operator() Status in Unity: Fix Released Status in Unity 5.0 series: Confirmed Status in “unity” package in Ubuntu: Confirmed Bug description: I was trying to figure out why the scale feature didn't show all windows when pressing super+w. I was on an empty workspace, summoned scale for all windows (super+w) and saw the window fading but no window previews appeared. I open CCSM an clicked around to check if the button bindings were set correct, and all of a sudden the system froze and compiz restartet. ProblemType: Crash DistroRelease: Ubuntu 12.04 Package: unity 5.10.0-0ubuntu3 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic-pae 3.2.14 Uname: Linux 3.2.0-23-generic-pae i686 NonfreeKernelModules: nvidia ApportVersion: 2.0.1-0ubuntu3 Architecture: i386 Date: Sun Apr 15 11:45:58 2012 ExecutablePath: /usr/bin/compiz InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta i386 (20120413) ProcCmdline: compiz ProcEnviron: LANGUAGE=en_US:en PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SegvAnalysis: Segfault happened at: 0xb7696375 _ZNSsC2ERKSs+21: mov-0x4(%eax),%edx PC (0xb7696375) ok source -0x4(%eax) (0xfffc) not located in a known VMA region (needed readable region)! destination %edx ok SegvReason: reading unknown VMA Signal: 11 SourcePackage: unity StacktraceTop: std::basic_stringchar, std::char_traitschar, std::allocatorchar ::basic_string(std::string const) () from /usr/lib/i386-linux-gnu/libstdc++.so.6 ?? () from /usr/lib/compiz/libunityshell.so unity::UBusManager::OnCallback(_GVariant*, void*) () from /usr/lib/compiz/libunityshell.so ?? () from /usr/lib/compiz/libunityshell.so ?? () from /lib/i386-linux-gnu/libglib-2.0.so.0 Title: compiz crashed with SIGSEGV in std::basic_stringchar, std::char_traitschar, std::allocatorchar ::basic_string() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/982196/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1160972] Re: [in-dash-payment] incorrect wrapping on the no-payment-method-selected text
** Changed in: unity Status: In Progress = Won't Fix ** Changed in: unity (Ubuntu) Status: New = Won't Fix -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1160972 Title: [in-dash-payment] incorrect wrapping on the no-payment-method-selected text Status in Unity: Won't Fix Status in “unity” package in Ubuntu: Won't Fix Bug description: Testing the current version of the 100scopes ppa/in-dash-payement: - open the music lens - search for something (e.g john) - click on an online album - click buy You get the text from the attached screenshot To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1160972/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 953963] Re: compiz crashed with SIGSEGV in ObjectPtr() from unity::launcher::Launcher::DesaturateIcons() from unity::launcher::Launcher::OnOverlayShown()
** Also affects: unity/5.0 Importance: Undecided Status: New ** Changed in: unity/5.0 Status: New = Incomplete ** Changed in: unity Status: Triaged = Fix Released ** Changed in: unity (Ubuntu) Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/953963 Title: compiz crashed with SIGSEGV in ObjectPtr() from unity::launcher::Launcher::DesaturateIcons() from unity::launcher::Launcher::OnOverlayShown() Status in Unity: Fix Released Status in Unity 5.0 series: Incomplete Status in “unity” package in Ubuntu: Fix Released Bug description: In Compiz config settings manager I've just reenabled Unity plugin when crash happened. ProblemType: Crash DistroRelease: Ubuntu 12.04 Package: unity 5.6.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-18.29-generic 3.2.9 Uname: Linux 3.2.0-18-generic x86_64 ApportVersion: 1.94.1-0ubuntu2 Architecture: amd64 Date: Tue Mar 13 12:53:34 2012 ExecutablePath: /usr/bin/compiz InstallationMedia: Ubuntu-Server 12.04 LTS Precise Pangolin - Alpha amd64 (20120313) ProcCmdline: compiz SegvAnalysis: Segfault happened at: 0x7fda626982e0 _ZN5unity8launcher8Launcher15DesaturateIconsEv+48:mov(%rbx),%rax PC (0x7fda626982e0) ok source (%rbx) (0x0061) not located in a known VMA region (needed readable region)! destination %rax ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: unity StacktraceTop: unity::launcher::Launcher::DesaturateIcons() () from /usr/lib/compiz/libunityshell.so unity::launcher::Launcher::OnOverlayShown(_GVariant*) () from /usr/lib/compiz/libunityshell.so unity::UBusManager::OnCallback(_GVariant*, void*) () from /usr/lib/compiz/libunityshell.so ?? () from /usr/lib/compiz/libunityshell.so g_main_context_dispatch () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 Title: compiz crashed with SIGSEGV in unity::launcher::Launcher::DesaturateIcons() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/953963/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1386721] Re: Graphics Slow After Upgrade 14.04 - 14.10
I'm having the same issue - but only since upgrading from 14.04 to 14.10. I've been a long time gnome3-team ppa and gnome3 user. The *big* difference I'm seeing is that it's not consistent. Maybe 1 out of 10 boots the UI is so sluggish it's unusable. Otherwise my issues match everyone else's: once I open Chrome or switch virtual desktops, the UI starts crawling. Some games work fine, others play at less than 1 fps. I'm on a sys76 w/ Intel Corporation Crystal Well Integrated Graphics Controller (rev 08) for graphics. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1386721 Title: Graphics Slow After Upgrade 14.04 - 14.10 Status in “xorg” package in Ubuntu: Confirmed Bug description: Using Gnome Ubuntu 14.10, Dell XPS 13, intel 915 Graphics After upgrading from 14.04 to 14.10 there are a lot of places where the graphics are working much slower than they were before: - Gnome Shell Interface is very sluggish, visible chops (redrawing) when pressing the [Super] key. - Selecting text in Gedit takes a full second pr. line Experiences some subjective improvement when I booted kernel 3.13.0-37 instead of 3.16.0-23, but that may be my imagination as the problem persists. I've searched google, forums, found a couple of relevant links that point to the issue being the Intel drivers. http://askubuntu.com/questions/53962...E2%86%92-14-10 http://www.webupd8.org/2014/10/ubunt...ent-1652086424 But the drivers currently in 14.10 should be newer than those supplied by Intel to 14.04 so that doesn't make sense to me. As one Intel developer wrote: I would like to point out that since what we do is bring more ecent versions of the software to the target distributions than they ship with, a 14.04 targeted installer is unlikely to bring much to a 14.10 installation, which most likely has the same or more recent versions already anyway. Source: https://01.org/linuxgraphics/node/375 ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.16.0-23.31-generic 3.16.4 Uname: Linux 3.16.0-23-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Tue Oct 28 15:24:30 2014 DistUpgraded: 2014-10-25 20:59:36,052 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu DkmsStatus: i915-3.15-3.13, 0.01, 3.13.0-37-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:060a] InstallationDate: Installed on 2014-06-14 (135 days ago) InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) MachineType: Dell Inc. XPS13 9333 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-23-generic root=UUID=105bbbd1-365e-4063-bdca-fc5431faf5dc ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to utopic on 2014-10-25 (2 days ago) dmi.bios.date: 12/11/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A02 dmi.board.name: 0GFTRT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA02:bd12/11/2013:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS13 9333 dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Tue Oct 28 13:44:57 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id4933 vendor CMN xserver.version: 2:1.16.0-1ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1386721/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe :
[Desktop-packages] [Bug 1193236] Re: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-*
I am getting the error on fresh installation of lubuntu 14.10 amd64 when I try to use zenity. ** Tags added: utopic -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to at-spi2-core in Ubuntu. https://bugs.launchpad.net/bugs/1193236 Title: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-* Status in Assistive Technology Service Provider Interface: New Status in “at-spi2-core” package in Ubuntu: Confirmed Status in “at-spi2-core” package in Debian: Confirmed Bug description: Since a few days, xsession-errors is fullfilled by that kind of errors: ** (nautilus:22621): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-uUkE07qdBK: Connection refused ** (gedit:22640): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-uUkE07qdBK: Connection refused Similar errors are reported all over the net, but Debian have tried to fix it already: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=702517 But some other devs seems to blame an atk-bridge: https://groups.google.com/forum/#!topic/yad-common/nYP0RutlxNA And some others suggest a dbus/gdbus race; the good thing is that seems not disturbing that much the system. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: libgdk-pixbuf2.0-0 2.28.1-1ubuntu2 ProcVersionSignature: Ubuntu 3.9.0-6.14-generic 3.9.6 Uname: Linux 3.9.0-6-generic i686 NonfreeKernelModules: nvidia ApportVersion: 2.10.2-0ubuntu1 Architecture: i386 Date: Fri Jun 21 08:35:40 2013 MarkForUpload: True SourcePackage: gdk-pixbuf UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/at-spi/+bug/1193236/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1386721] Re: Graphics Slow After Upgrade 14.04 - 14.10
Sorry for the double-post. Launchpad was giving me 500s and timeouts. Please delete this and one of the duplicate comments. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1386721 Title: Graphics Slow After Upgrade 14.04 - 14.10 Status in “xorg” package in Ubuntu: Confirmed Bug description: Using Gnome Ubuntu 14.10, Dell XPS 13, intel 915 Graphics After upgrading from 14.04 to 14.10 there are a lot of places where the graphics are working much slower than they were before: - Gnome Shell Interface is very sluggish, visible chops (redrawing) when pressing the [Super] key. - Selecting text in Gedit takes a full second pr. line Experiences some subjective improvement when I booted kernel 3.13.0-37 instead of 3.16.0-23, but that may be my imagination as the problem persists. I've searched google, forums, found a couple of relevant links that point to the issue being the Intel drivers. http://askubuntu.com/questions/53962...E2%86%92-14-10 http://www.webupd8.org/2014/10/ubunt...ent-1652086424 But the drivers currently in 14.10 should be newer than those supplied by Intel to 14.04 so that doesn't make sense to me. As one Intel developer wrote: I would like to point out that since what we do is bring more ecent versions of the software to the target distributions than they ship with, a 14.04 targeted installer is unlikely to bring much to a 14.10 installation, which most likely has the same or more recent versions already anyway. Source: https://01.org/linuxgraphics/node/375 ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.16.0-23.31-generic 3.16.4 Uname: Linux 3.16.0-23-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Tue Oct 28 15:24:30 2014 DistUpgraded: 2014-10-25 20:59:36,052 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu DkmsStatus: i915-3.15-3.13, 0.01, 3.13.0-37-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:060a] InstallationDate: Installed on 2014-06-14 (135 days ago) InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) MachineType: Dell Inc. XPS13 9333 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-23-generic root=UUID=105bbbd1-365e-4063-bdca-fc5431faf5dc ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to utopic on 2014-10-25 (2 days ago) dmi.bios.date: 12/11/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A02 dmi.board.name: 0GFTRT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA02:bd12/11/2013:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS13 9333 dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Tue Oct 28 13:44:57 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id4933 vendor CMN xserver.version: 2:1.16.0-1ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1386721/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1386721] Re: Graphics Slow After Upgrade 14.04 - 14.10
I'm having the same issue - but only since upgrading from 14.04 to 14.10. I've been a long time gnome3-team ppa and gnome3 user. The *big* difference I'm seeing is that it's not consistent. Maybe 1 out of 10 boots the UI is so sluggish it's unusable. Otherwise my issues match everyone else's: once I open Chrome or switch virtual desktops, the UI starts crawling. Some games work fine, others play at less than 1 fps. I'm on a sys76 w/ Intel Corporation Crystal Well Integrated Graphics Controller (rev 08) for graphics. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1386721 Title: Graphics Slow After Upgrade 14.04 - 14.10 Status in “xorg” package in Ubuntu: Confirmed Bug description: Using Gnome Ubuntu 14.10, Dell XPS 13, intel 915 Graphics After upgrading from 14.04 to 14.10 there are a lot of places where the graphics are working much slower than they were before: - Gnome Shell Interface is very sluggish, visible chops (redrawing) when pressing the [Super] key. - Selecting text in Gedit takes a full second pr. line Experiences some subjective improvement when I booted kernel 3.13.0-37 instead of 3.16.0-23, but that may be my imagination as the problem persists. I've searched google, forums, found a couple of relevant links that point to the issue being the Intel drivers. http://askubuntu.com/questions/53962...E2%86%92-14-10 http://www.webupd8.org/2014/10/ubunt...ent-1652086424 But the drivers currently in 14.10 should be newer than those supplied by Intel to 14.04 so that doesn't make sense to me. As one Intel developer wrote: I would like to point out that since what we do is bring more ecent versions of the software to the target distributions than they ship with, a 14.04 targeted installer is unlikely to bring much to a 14.10 installation, which most likely has the same or more recent versions already anyway. Source: https://01.org/linuxgraphics/node/375 ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.16.0-23.31-generic 3.16.4 Uname: Linux 3.16.0-23-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Tue Oct 28 15:24:30 2014 DistUpgraded: 2014-10-25 20:59:36,052 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu DkmsStatus: i915-3.15-3.13, 0.01, 3.13.0-37-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:060a] InstallationDate: Installed on 2014-06-14 (135 days ago) InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) MachineType: Dell Inc. XPS13 9333 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-23-generic root=UUID=105bbbd1-365e-4063-bdca-fc5431faf5dc ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to utopic on 2014-10-25 (2 days ago) dmi.bios.date: 12/11/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A02 dmi.board.name: 0GFTRT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnDellInc.:bvrA02:bd12/11/2013:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: dmi.product.name: XPS13 9333 dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Tue Oct 28 13:44:57 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id4933 vendor CMN xserver.version: 2:1.16.0-1ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1386721/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe :
[Desktop-packages] [Bug 1374871] Re: upgrade from 0.2.91.6 to 0.2.91.7 breaks my X.org (nvidia)
*** This bug is a duplicate of bug 1365695 *** https://bugs.launchpad.net/bugs/1365695 Forcibly uninstalling installing of this package seems to fix my missing alternatives to provide nvidia_drv.so ** Package changed: ubuntu-drivers-common (Ubuntu) = nvidia-graphics- drivers-331 (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu. https://bugs.launchpad.net/bugs/1374871 Title: alternatives to nvidia_drv.so lost during upgrade Status in “nvidia-graphics-drivers-331” package in Ubuntu: New Bug description: During my update cycle I've lost alternatives to provide nvidia_drv.so. This situation persisted even during distribution upgrade. Forcing nvidia-331 to reinstall fixed this issue - which I mistakenly connected to “ubuntu-drivers-common” package To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1374871/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1374871] Re: upgrade from 0.2.91.6 to 0.2.91.7 breaks my X.org (nvidia)
*** This bug is a duplicate of bug 1365695 *** https://bugs.launchpad.net/bugs/1365695 ** Description changed: - After upgrading to version 0.2.91.7 my X.org stopped working - it could - not find nvidia drivers. Downgrading to 0.2.91.4 (from releease) fixes - this problem. + During my update cycle I've lost alternatives to provide nvidia_drv.so. + This situation persisted even during distribution upgrade. Forcing + nvidia-331 to reinstall fixed this issue - which I mistakenly connected + to “ubuntu-drivers-common” package ** Summary changed: - upgrade from 0.2.91.6 to 0.2.91.7 breaks my X.org (nvidia) + alternatives to nvidia_drv.so lost during upgrade ** This bug has been marked a duplicate of bug 1365695 No longer able to use GUI after update -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu. https://bugs.launchpad.net/bugs/1374871 Title: alternatives to nvidia_drv.so lost during upgrade Status in “nvidia-graphics-drivers-331” package in Ubuntu: New Bug description: During my update cycle I've lost alternatives to provide nvidia_drv.so. This situation persisted even during distribution upgrade. Forcing nvidia-331 to reinstall fixed this issue - which I mistakenly connected to “ubuntu-drivers-common” package To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1374871/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1359486]
Never confirmed by QA team - moving to UNCONFIRMED. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1359486 Title: [PPA] Use LibreOffice Dialogs setting is ignored in KDE Status in LibreOffice Productivity Suite: Won't Fix Status in “libreoffice” package in Ubuntu: Fix Released Status in “qt4-x11” package in Ubuntu: Confirmed Bug description: Kubuntu 14.04 (KDE Desktop Environment) Packages from this ppa: https://launchpad.net/~libreoffice Version: 4.3.0-3ubuntu2~trusty1 (as reported by dpkg, note updated packages as of about 1 hour ago) or 4.3.0.4 Build ID: 430m0(Build:4) as reported by LibreOffice about dialog. LibreOffice uses it's native filepicker/save dialogs, regardless of whether the config option Use LibreOffice Dialogs is ticked or not. This is a regression from 4.2.4-0ubuntu2 currently in the main ubuntu security repository. Related Bugs: https://bugreports.qt-project.org/browse/QTBUG-38585 https://bugreports.qt-project.org/browse/QTBUG-34614 According to the LO team, both these bugs have patches that address the automatic disabling of Qt dialogs at runtime (if buggy Qt is detected.) Initial report/discussion on LO bugtracker (now closed) here: https://bugs.freedesktop.org/show_bug.cgi?id=82598 To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1359486/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1324243] Re: Several applications crashes when reading a mpeg4 video
Nautilus does not crah anymore when looking at the file properties on Ubuntu 14.10. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1324243 Title: Several applications crashes when reading a mpeg4 video Status in “nautilus” package in Ubuntu: New Status in “vlc” package in Ubuntu: Fix Released Bug description: I am reporting this bug on the Ubuntu section as it affects several programs. Yesterday (2014-05-27) I started experiencing crashes with HD channels on my DVB-T tuner and the latest version of Kaffeine that uses VLC facilites for decoding. My Ubuntu version is a 14.04 LTS x64 and is up to date. I had a small video recorded one week ago when the HD video decoding was still working. Now if I play it with Kaffeine - crash. If I try to read it in VLC - crash, if I try to check properties in Nautilus - crash, try to play in Totem - crash So it looks like a low level component was updated and is now causing a crash on all software relying on it. Kaffeine version: 1.3-git VLC version: 2.1.5 Rincewind Nautilus version: 3.10.1 Totem : 3.10.1 With Kaffeine and VLC I get a stack trace that looks like that: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fdeb2847700 (LWP 29065)] 0x7fdef766849a in ?? () from /usr/lib/libvlccore.so.7 (gdb) bt #0 0x7fdef766849a in ?? () from /usr/lib/libvlccore.so.7 #1 0x7fdef766a519 in ?? () from /usr/lib/libvlccore.so.7 #2 0x7fdef7ee9182 in start_thread (arg=0x7fdeb2847700) at pthread_create.c:312 #3 0x7fdef7a1230d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111 And on Nautilus I get a different one: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7f499318e700 (LWP 8826)] 0x7f49ac14bf12 in ?? () from /usr/lib/x86_64-linux-gnu/gstreamer-1.0/libgstlibav.so (gdb) bt #0 0x7f49ac14bf12 in ?? () from /usr/lib/x86_64-linux-gnu/gstreamer-1.0/libgstlibav.so #1 0x7f49ac14c671 in ?? () from /usr/lib/x86_64-linux-gnu/gstreamer-1.0/libgstlibav.so #2 0x7f49cce8fc73 in ?? () from /usr/lib/x86_64-linux-gnu/libgstaudio-1.0.so.0 #3 0x7f49cce9004b in ?? () from /usr/lib/x86_64-linux-gnu/libgstaudio-1.0.so.0 #4 0x7f49cce91036 in ?? () from /usr/lib/x86_64-linux-gnu/libgstaudio-1.0.so.0 #5 0x7f49cd791d08 in ?? () from /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so.0 #6 0x7f49c3bc82a9 in ?? () from /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 #7 0x7f49cd791d08 in ?? () from /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so.0 #8 0x7f49c3baab09 in gst_base_parse_push_frame () from /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 #9 0x7f49c3bae1c3 in gst_base_parse_finish_frame () from /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 #10 0x7f49ac373c33 in ?? () from /usr/lib/x86_64-linux-gnu/gstreamer-1.0/libgstaudioparsers.so #11 0x7f49c3ba81e4 in ?? () from /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 #12 0x7f49c3bab74a in ?? () from /usr/lib/x86_64-linux-gnu/libgstbase-1.0.so.0 #13 0x7f49cd791d08 in ?? () from /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so.0 #14 0x7f49ae35da23 in ?? () from /usr/lib/x86_64-linux-gnu/gstreamer-1.0/libgstcoreelements.so #15 0x7f49cd7bf549 in ?? () from /usr/lib/x86_64-linux-gnu/libgstreamer-1.0.so.0 #16 0x7f49df50989c in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #17 0x7f49df508f15 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0 #18 0x7f49ded64182 in start_thread (arg=0x7f499318e700) at pthread_create.c:312 #19 0x7f49dea9130d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1324243/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1359486]
(In reply to Joel Madero from comment #15) Never confirmed by QA team - moving to UNCONFIRMED. Actually NOTABUG/NOTOURBUG could be a better resolution for this bug. See comment 6 and comment 9. From our side it seems to work as designed. And we have several confirmations that it actually works - see comment 12, and the openSUSE bug that in 'See Also'. I also can confirm that it works for me in Fedora 20. So WORKSFORME also would be appropriate here. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1359486 Title: [PPA] Use LibreOffice Dialogs setting is ignored in KDE Status in LibreOffice Productivity Suite: Won't Fix Status in “libreoffice” package in Ubuntu: Fix Released Status in “qt4-x11” package in Ubuntu: Confirmed Bug description: Kubuntu 14.04 (KDE Desktop Environment) Packages from this ppa: https://launchpad.net/~libreoffice Version: 4.3.0-3ubuntu2~trusty1 (as reported by dpkg, note updated packages as of about 1 hour ago) or 4.3.0.4 Build ID: 430m0(Build:4) as reported by LibreOffice about dialog. LibreOffice uses it's native filepicker/save dialogs, regardless of whether the config option Use LibreOffice Dialogs is ticked or not. This is a regression from 4.2.4-0ubuntu2 currently in the main ubuntu security repository. Related Bugs: https://bugreports.qt-project.org/browse/QTBUG-38585 https://bugreports.qt-project.org/browse/QTBUG-34614 According to the LO team, both these bugs have patches that address the automatic disabling of Qt dialogs at runtime (if buggy Qt is detected.) Initial report/discussion on LO bugtracker (now closed) here: https://bugs.freedesktop.org/show_bug.cgi?id=82598 To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1359486/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1359486] Re: [PPA] Use LibreOffice Dialogs setting is ignored in KDE
** Changed in: df-libreoffice Status: Confirmed = Won't Fix -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1359486 Title: [PPA] Use LibreOffice Dialogs setting is ignored in KDE Status in LibreOffice Productivity Suite: Won't Fix Status in “libreoffice” package in Ubuntu: Fix Released Status in “qt4-x11” package in Ubuntu: Confirmed Bug description: Kubuntu 14.04 (KDE Desktop Environment) Packages from this ppa: https://launchpad.net/~libreoffice Version: 4.3.0-3ubuntu2~trusty1 (as reported by dpkg, note updated packages as of about 1 hour ago) or 4.3.0.4 Build ID: 430m0(Build:4) as reported by LibreOffice about dialog. LibreOffice uses it's native filepicker/save dialogs, regardless of whether the config option Use LibreOffice Dialogs is ticked or not. This is a regression from 4.2.4-0ubuntu2 currently in the main ubuntu security repository. Related Bugs: https://bugreports.qt-project.org/browse/QTBUG-38585 https://bugreports.qt-project.org/browse/QTBUG-34614 According to the LO team, both these bugs have patches that address the automatic disabling of Qt dialogs at runtime (if buggy Qt is detected.) Initial report/discussion on LO bugtracker (now closed) here: https://bugs.freedesktop.org/show_bug.cgi?id=82598 To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1359486/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390579] [NEW] [K40IN, Realtek ALC662 rev1, Speaker, Internal] fails after a while
Public bug reported: Try different gopro-made video or galaxy s4-made video , and every time the same: normally at start and sound brakes in few seconds. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: archer 1937 F pulseaudio /dev/snd/pcmC0D0p: archer 1937 F...m pulseaudio CurrentDesktop: GNOME Date: Fri Nov 7 21:26:30 2014 InstallationDate: Installed on 2014-05-29 (162 days ago) InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_Card: Built-in Audio - HDA NVidia Symptom_Jack: Speaker, Internal Symptom_Type: Sound works for a while, then breaks Title: [K40IN, Realtek ALC662 rev1, Speaker, Internal] fails after a while UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/22/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 222 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K40IN dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr222:bd01/22/2010:svnASUSTeKComputerInc.:pnK40IN:pvr1.0:rvnASUSTeKComputerInc.:rnK40IN:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr: dmi.product.name: K40IN dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1390579 Title: [K40IN, Realtek ALC662 rev1, Speaker, Internal] fails after a while Status in “alsa-driver” package in Ubuntu: New Bug description: Try different gopro-made video or galaxy s4-made video , and every time the same: normally at start and sound brakes in few seconds. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: archer 1937 F pulseaudio /dev/snd/pcmC0D0p: archer 1937 F...m pulseaudio CurrentDesktop: GNOME Date: Fri Nov 7 21:26:30 2014 InstallationDate: Installed on 2014-05-29 (162 days ago) InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) PackageArchitecture: all SourcePackage: alsa-driver Symptom: audio Symptom_Card: Built-in Audio - HDA NVidia Symptom_Jack: Speaker, Internal Symptom_Type: Sound works for a while, then breaks Title: [K40IN, Realtek ALC662 rev1, Speaker, Internal] fails after a while UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/22/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 222 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K40IN dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr222:bd01/22/2010:svnASUSTeKComputerInc.:pnK40IN:pvr1.0:rvnASUSTeKComputerInc.:rnK40IN:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr: dmi.product.name: K40IN dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1390579/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1389904] Re: With the recent update to xserver-xorg-video-intel, system boots to a black screen
I made a fresh install into an old IBM Thinkcentre 8187-73G with Intel 82865G Integrated Graphics Controller. Lubuntu 14.04.1 and updated/dist-upgraded it. The only tweak I tested was UXA acceleration. Section Device Identifier Intel Graphics Driver intel Option AccelMethod uxa EndSection The computer works and seems not affected by this bug (with a clean up to date Lubuntu 14.04). ** Attachment added: lshw hardware and driver data https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1389904/+attachment/4255380/+files/lshw-ibm-thinkcentre-8187-73G.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1389904 Title: With the recent update to xserver-xorg-video-intel, system boots to a black screen Status in “xserver-xorg-video-intel” package in Ubuntu: Incomplete Bug description: The latest system updates for Lubuntu 14.04 includes an update to the i915 display driver, which this machine uses. After applying updates and rebooting, at the end of the boot process, where normally the login screen appears, the screen remains blank (with a black background color). That change has rendered my Lubuntu 14.04 partition completely unusable, even when booting earlier versions of the kernel. Regardless the kernel level booted, the system now boots to a blank screen. Because of this, I had to report the error on my UbuntuStudio 14.04 partition, to which I have not yet applied updates. So the level of the Intel i915 driver package in this error report is the version prior to the updated version that (probably) caused the problem. 1. The release of ubuntu with the problem is Lubuntu 14.04.1, with a kernel version ending in .39. 2. The last working version of xserver-xorg-video-intel is 2:2.99.910-0ubuntu1 I can't boot by Lubuntu partition anymore to tell you the version number that fails, but it is later than the indicated version. 3. Prior to installing system updates, my Lubuntu 14.04.01 system worked fine, and I was able to boot it and perform my suite of tests (it's a test system). After applying updates, it boots to a blank screen, and I cannot do anything with it. I expected the login screen to appear, but it doesn't, and there is no error message. 4. After applying system updates I expected my system to reboot normally, allowing me to login. Instead, a blank screen is displayed, with no error message, and the login screen does not appear after many minutes of waiting. If I hit the power button, it initiates shutdown. Hitting several keyboard characters (or typing my password to the blank screen) had no effect. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-32.57-lowlatency 3.13.11.4 Uname: Linux 3.13.0-32-lowlatency i686 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: i386 CurrentDesktop: XFCE Date: Wed Nov 5 16:13:54 2014 InstallationDate: Installed on 2014-04-28 (191 days ago) InstallationMedia: Ubuntu-Studio 14.04 LTS Trusty Tahr - Release i386 (20140416.3) SourcePackage: xserver-xorg-video-intel UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1389904/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390587] [NEW] 'xrandr --output LVDS1 --rotate inverted' causes screen splitting and glitches
Public bug reported: The upper half of the screen flickers, and is inverted, the bottom half is not inverted. After setting the screen to normal, it appears normal except for my mouse pointer being followed by an upside down mouse pointer. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Fri Nov 7 14:03:30 2014 DistUpgraded: 2014-11-05 11:58:52,669 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.18, 3.13.0-39-generic, x86_64: installed virtualbox, 4.3.18, 3.16.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:2203] InstallationDate: Installed on 2014-09-06 (61 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) MachineType: LENOVO 3434CTO ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-24-generic.efi.signed root=/dev/mapper/linuxVG-rootLV ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to utopic on 2014-11-05 (2 days ago) dmi.bios.date: 02/25/2013 dmi.bios.vendor: LENOVO dmi.bios.version: GCET92WW (2.52 ) dmi.board.asset.tag: Not Available dmi.board.name: 3434CTO dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrGCET92WW(2.52):bd02/25/2013:svnLENOVO:pn3434CTO:pvrThinkPadX230Tablet:rvnLENOVO:rn3434CTO:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3434CTO dmi.product.version: ThinkPad X230 Tablet dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Thu Nov 6 20:29:35 2014 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 728 vendor LGD xserver.version: 2:1.16.0-1ubuntu1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 corruption ubuntu utopic ** Attachment added: top half is inverted, bottom half is not inverted, top half flickers. https://bugs.launchpad.net/bugs/1390587/+attachment/4255388/+files/Screenshot%20from%202014-11-07%2014%3A04%3A16.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1390587 Title: 'xrandr --output LVDS1 --rotate inverted' causes screen splitting and glitches Status in “xorg” package in Ubuntu: New Bug description: The upper half of the screen flickers, and is inverted, the bottom half is not inverted. After setting the screen to normal, it appears normal except for my mouse pointer being followed by an upside down mouse pointer. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Fri Nov 7 14:03:30 2014 DistUpgraded: 2014-11-05 11:58:52,669 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu DkmsStatus: virtualbox, 4.3.18, 3.13.0-39-generic, x86_64: installed virtualbox, 4.3.18, 3.16.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller
[Desktop-packages] [Bug 1378969] Re: pulseaudio doesn't enforce remembered volume when changing to HDMI output
** Changed in: pulseaudio (Ubuntu) Status: Incomplete = New ** Description changed: When I change my sound output to use a HDMI output, even though `pactl list` reports the correct volume level, the output volume is in fact 100%. Executing the following command afterwards solves the problem. $ pactl set-sink-volume SINK-NUM +0 Attached is three outputs of `pactl list`: 1) hdmi-before : taken when HDMI output is working as it should 2) hdmi-after : this is taken after changing away from the HDMI output (to laptop speaker), and back to HDMI again -- reported volume level is 50%, but real output level is 100%. 3) hdmi-after-adjust : taken after executing the command listed above (which sets real output level to 50%) If it has any interest, I used the built in system settings to change sound output (even though the same problem occurs when doing so from the command line). I'm using Ubuntu 14.04.1 $ pulseaudio --version pulseaudio 4.0 $ pactl --version pactl 4.0 Compiled with libpulse 4.0.0 Linked with libpulse 4.0.0 + + + + Please see comment below if the problem still seems unclear + + = ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 Uname: Linux 3.13.0-36-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: rasmus 2685 F pulseaudio /dev/snd/pcmC0D0c: rasmus 2685 F...m pulseaudio /dev/snd/pcmC0D3p: rasmus 2685 F...m pulseaudio CurrentDesktop: Unity Date: Wed Oct 8 19:49:58 2014 InstallationDate: Installed on 2014-05-23 (138 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/04/2012 dmi.bios.vendor: LENOVO dmi.bios.version: GAET35WW (1.12 ) dmi.board.asset.tag: Not Available dmi.board.name: 33643EG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrGAET35WW(1.12):bd07/04/2012:svnLENOVO:pn33643EG:pvrThinkPadEdgeS430:rvnLENOVO:rn33643EG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 33643EG dmi.product.version: ThinkPad Edge S430 dmi.sys.vendor: LENOVO -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1378969 Title: pulseaudio doesn't enforce remembered volume when changing to HDMI output Status in “pulseaudio” package in Ubuntu: New Bug description: When I change my sound output to use a HDMI output, even though `pactl list` reports the correct volume level, the output volume is in fact 100%. Executing the following command afterwards solves the problem. $ pactl set-sink-volume SINK-NUM +0 Attached is three outputs of `pactl list`: 1) hdmi-before : taken when HDMI output is working as it should 2) hdmi-after : this is taken after changing away from the HDMI output (to laptop speaker), and back to HDMI again -- reported volume level is 50%, but real output level is 100%. 3) hdmi-after-adjust : taken after executing the command listed above (which sets real output level to 50%) If it has any interest, I used the built in system settings to change sound output (even though the same problem occurs when doing so from the command line). I'm using Ubuntu 14.04.1 $ pulseaudio --version pulseaudio 4.0 $ pactl --version pactl 4.0 Compiled with libpulse 4.0.0 Linked with libpulse 4.0.0 Please see comment below if the problem still seems unclear = ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 Uname: Linux 3.13.0-36-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: rasmus 2685 F pulseaudio /dev/snd/pcmC0D0c: rasmus 2685 F...m pulseaudio /dev/snd/pcmC0D3p: rasmus 2685 F...m pulseaudio CurrentDesktop: Unity Date: Wed Oct 8 19:49:58 2014 InstallationDate: Installed on 2014-05-23 (138 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/04/2012 dmi.bios.vendor: LENOVO dmi.bios.version: GAET35WW (1.12 ) dmi.board.asset.tag: Not Available dmi.board.name: 33643EG
[Desktop-packages] [Bug 1390590] [NEW] ModemManager Crushes after GPRS connection is established (MediaTek modem)
Public bug reported: If i i exstablish a GPRS connection with my Phillips X620 (MediaTek chip), modemmnager crushes. syslog in attachment. lspci -vvnn 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0201] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at ffa8 (32-bit, non-prefetchable) [size=1K] Capabilities: access denied Kernel driver in use: ehci-pci ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: modemmanager 1.0.0-2ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CurrentDesktop: XFCE Date: Fri Nov 7 22:24:02 2014 InstallationDate: Installed on 2014-04-07 (214 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326) SourcePackage: modemmanager UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: modemmanager (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty ** Attachment added: syslog.txt https://bugs.launchpad.net/bugs/1390590/+attachment/4255434/+files/syslog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to modemmanager in Ubuntu. https://bugs.launchpad.net/bugs/1390590 Title: ModemManager Crushes after GPRS connection is established (MediaTek modem) Status in “modemmanager” package in Ubuntu: New Bug description: If i i exstablish a GPRS connection with my Phillips X620 (MediaTek chip), modemmnager crushes. syslog in attachment. lspci -vvnn 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0201] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at ffa8 (32-bit, non-prefetchable) [size=1K] Capabilities: access denied Kernel driver in use: ehci-pci ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: modemmanager 1.0.0-2ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CurrentDesktop: XFCE Date: Fri Nov 7 22:24:02 2014 InstallationDate: Installed on 2014-04-07 (214 days ago) InstallationMedia: Xubuntu 14.04 LTS Trusty Tahr - Beta amd64 (20140326) SourcePackage: modemmanager UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/modemmanager/+bug/1390590/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390596] [NEW] Sync jbigkit 2.1-3.1 (main) from Debian unstable (main)
Public bug reported: Please sync jbigkit 2.1-3.1 (main) from Debian unstable (main) Explanation of the Ubuntu delta and why it can be dropped: * Merge with Debian; remaining changes: - Allow the package to cross build, remove libtool usage. Closes: #761760. Merged into Debian. Changelog entries since current vivid version 2.1-3ubuntu1: jbigkit (2.1-3.1) unstable; urgency=medium * Non maintainer upload. * Allow the package to cross build, remove libtool usage. Closes: #761760. -- Matthias Klose d...@debian.org Mon, 13 Oct 2014 21:07:40 +0200 ** Affects: jbigkit (Ubuntu) Importance: Wishlist Status: New ** Changed in: jbigkit (Ubuntu) Importance: Undecided = Wishlist -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to jbigkit in Ubuntu. https://bugs.launchpad.net/bugs/1390596 Title: Sync jbigkit 2.1-3.1 (main) from Debian unstable (main) Status in “jbigkit” package in Ubuntu: New Bug description: Please sync jbigkit 2.1-3.1 (main) from Debian unstable (main) Explanation of the Ubuntu delta and why it can be dropped: * Merge with Debian; remaining changes: - Allow the package to cross build, remove libtool usage. Closes: #761760. Merged into Debian. Changelog entries since current vivid version 2.1-3ubuntu1: jbigkit (2.1-3.1) unstable; urgency=medium * Non maintainer upload. * Allow the package to cross build, remove libtool usage. Closes: #761760. -- Matthias Klose d...@debian.org Mon, 13 Oct 2014 21:07:40 +0200 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/jbigkit/+bug/1390596/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1184699] Re: Canon LIDE 110 can only scan once, then I need to replug the usb cable
I also have a Lide 110 that won't work the second time (bought it because my old Lide 25 broke on USB3 and the 110 was rated as 'complete support'). Sane-utils 1.0.23-3ubuntu3.1. I have Mint 17. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to sane-backends in Ubuntu. https://bugs.launchpad.net/bugs/1184699 Title: Canon LIDE 110 can only scan once, then I need to replug the usb cable Status in Simple Scan: New Status in “sane-backends” package in Ubuntu: Confirmed Bug description: I have a Canon LIDE 110 scanner which works by default on ubuntu 13.04. The problem is after first scan, I can not scan for second time. I need to reconnect the USB cable to use the scanner again. # TEST 1 : without reconnecting the usb cable francois@pc:~$ scanimage -v test1.jpg # success scanimage: scanning image of size 636x885 pixels at 8 bits/pixel scanimage: acquiring gray frame scanimage: min/max graylevel value = 0/255 scanimage: read 562860 bytes in total # I don't unplug plug the usb cable. francois@pc:~$ scanimage -v test2.jpg # FAIL scanimage: no SANE devices found # TEST 2 : reconnect usb cable between scan attempts francois@pc:~$ scanimage -v test1.jpg # success scanimage: scanning image of size 636x885 pixels at 8 bits/pixel scanimage: acquiring gray frame scanimage: min/max graylevel value = 0/255 scanimage: read 562860 bytes in total # I unplug and replug the usb cable. francois@pc:~$ scanimage -v test2.jpg # SUCCESS scanimage: scanning image of size 636x885 pixels at 8 bits/pixel scanimage: acquiring gray frame scanimage: min/max graylevel value = 0/255 scanimage: read 562860 bytes in total francois@pc:~$ dmesg # extract [ 829.365158] usb 3-1: USB disconnect, device number 2 [ 834.935000] usb 3-1: new high-speed USB device number 4 using xhci_hcd [ 834.952515] usb 3-1: New USB device found, idVendor=04a9, idProduct=1909 [ 834.952519] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 834.952522] usb 3-1: Product: CanoScan [ 834.952524] usb 3-1: Manufacturer: Canon [ 1623.738811] usb 3-1: USB disconnect, device number 4 [ 1623.739072] xhci_hcd :00:14.0: Slot 3 endpoint 6 not removed from BW list! [ 1625.528827] usb 3-1: new high-speed USB device number 5 using xhci_hcd [ 1625.546327] usb 3-1: New USB device found, idVendor=04a9, idProduct=1909 [ 1625.546331] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1625.546334] usb 3-1: Product: CanoScan [ 1625.546336] usb 3-1: Manufacturer: Canon francois@pc:~$ uname -a cat /etc/issue Linux pc 3.8.0-22-generic #33-Ubuntu SMP Thu May 16 15:17:14 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Ubuntu 13.04 \n \l The problem was reported here by someone else : http://askubuntu.com/questions/278473/canon-lide-110-should-reconnect- usb-for-each-scan Thanks François To manage notifications about this bug go to: https://bugs.launchpad.net/simple-scan/+bug/1184699/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1364630] Re: init: Error while reading from descriptor: Broken pipe
yes, same here - Trusty was OK, error only started in Utopic, and I'm using DHCP. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-304 in Ubuntu. https://bugs.launchpad.net/bugs/1364630 Title: init: Error while reading from descriptor: Broken pipe Status in “nvidia-graphics-drivers-304” package in Ubuntu: Confirmed Bug description: [ 16.934379] init: Error while reading from descriptor: Broken pipe ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: init 1.20ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-11.16-generic 3.16.1 Uname: Linux 3.16.0-11-generic x86_64 ApportVersion: 2.14.7-0ubuntu1 Architecture: amd64 CurrentDesktop: GNOME Date: Tue Sep 2 17:23:15 2014 InstallationDate: Installed on 2014-04-27 (128 days ago) InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 (20140416.2) SourcePackage: init-system-helpers UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-304/+bug/1364630/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1296133] Re: Suspend and hibernate missing from KMenu and Power Management in System settings
I had the same problem but, following some clues from the comments in this bug, have found a fix. I had disabled Power Management in System Settings - Startup and Shutdown - Service Manager - Startup Services. Simply restarting the service immediately gave me back my Suspend buttons! To restart the service - Select the Power Management service - Enable the 'Use' checkbox - Click the 'Start' button!! (the 'Status' should change to 'Running' and your buttons should now be available) - Click the 'Apply' button Hope this works for you. Some more system info ... upower -d Daemon: daemon-version: 0.9.23 can-suspend: yes can-hibernate: no on-battery: no on-low-battery: no lid-is-closed: no lid-is-present: no is-docked: no uname -a Linux marvin 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to upower in Ubuntu. https://bugs.launchpad.net/bugs/1296133 Title: Suspend and hibernate missing from KMenu and Power Management in System settings Status in “upower” package in Ubuntu: Confirmed Bug description: I have used install scripts to install Kubuntu 14.04 on three completely different systems. Although the packages installed are basically the same, one of the system has no Suspend/hibernate options in the KMenu nor in the Power management in the KDE System settings. Since this is a laptop, this also means that the battery life is greatly reduced, because it cannot go to standby when lid is closed or when it's idle. Interestingly, If I logout, there is a Standby button on the lighdm login screen. If I click it, the laptop goes to standby and wakes up without problems. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: upower 0.9.23-2ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-18.38-generic 3.13.6 Uname: Linux 3.13.0-18-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.13.3-0ubuntu1 Architecture: amd64 CurrentDesktop: KDE Date: Sat Mar 22 21:18:53 2014 EcryptfsInUse: Yes InstallationDate: Installed on 2014-03-14 (8 days ago) InstallationMedia: Ubuntu-Server 14.04 LTS Trusty Tahr - Alpha amd64 (20140130) SourcePackage: upower UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upower/+bug/1296133/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1382865] Re: Dell Latitude E6330 Touchpad stops working
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: xserver-xorg-input-synaptics (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-input-synaptics in Ubuntu. https://bugs.launchpad.net/bugs/1382865 Title: Dell Latitude E6330 Touchpad stops working Status in “xserver-xorg-input-synaptics” package in Ubuntu: Confirmed Bug description: After login, at some point the touchpad stops working. Have to use a USB mouse, which works fine. $ lsb_release -rd Description: Ubuntu 14.10 Release: 14.10 Will attach files per instructions here https://wiki.ubuntu.com/DebuggingTouchpadDetection ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xserver-xorg-input-synaptics 1.8.1-1ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-23.30-generic 3.16.4 Uname: Linux 3.16.0-23-generic x86_64 ApportVersion: 2.14.7-0ubuntu7 Architecture: amd64 Date: Sat Oct 18 15:42:48 2014 DistUpgraded: 2014-09-26 07:30:34,394 DEBUG enabling apt cron job DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 DistroCodename: utopic DistroVariant: ubuntu InstallationDate: Installed on 2013-09-17 (396 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120703-15:08 MachineType: Dell Inc. Latitude E6330 ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=C SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-23-generic root=UUID=870ded82-2482-4ff3-a3f1-5258247f795f ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-input-synaptics UpgradeStatus: Upgraded to utopic on 2014-09-26 (22 days ago) dmi.bios.date: 05/20/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A10 dmi.board.name: 0YRP01 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA10:bd05/20/2013:svnDellInc.:pnLatitudeE6330:pvr01:rvnDellInc.:rn0YRP01:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E6330 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Sat Oct 18 14:21:14 2014 xserver.configfile: default xserver.errors: AlpsPS/2 ALPS DualPoint TouchPad: Read error 19 xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 12588 vendor AUO xserver.version: 2:1.16.0-1ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/1382865/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1371834] Re: Chrome causes segfault in i965_dri.so
This happens in chrome-stable 38.0.2125.111-1, chrome-beta 39.0.2171.52-1, and chrome unstable 40.0.2209.0-1 when browsing chrome webstore (with this graphics card). It does not happen when browsing chrome webstore with chromium 37.0.2062.120 or firefox 33. http://ubuntuforums.org/showthread.php?t=2248299 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1371834 Title: Chrome causes segfault in i965_dri.so Status in Chromium Browser: Unknown Status in “mesa” package in Ubuntu: Confirmed Status in Debian GNU/Linux: New Bug description: Running chrome 38.0.2125.66-1 on Ubuntu 14.10, on Lenovo X230 When I start a new instance of chrome, it cannot enable WebGL. I have reported that bug separately to chrome at https://code.google.com/p/chromium/issues/detail?id=416207 I suspect the cause of the bug is in mesa, as dmesg contains evidence of a segfault: [31979.398090] chrome[24013]: segfault at 20 ip 7fbbd5ca5d83 sp 7fffd7669ab0 error 4 in i965_dri.so[7fbbd59c4000+50a000] [31979.585606] chrome[24104]: segfault at 20 ip 7f7550c26d83 sp 7fff970b4630 error 4 in i965_dri.so[7f7550945000+50a000] [31979.737378] chrome[24117]: segfault at 20 ip 7ffd06e45d83 sp 7fffc989f440 error 4 in i965_dri.so[7ffd06b64000+50a000] ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: libgl1-mesa-dri 10.2.6-1ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-16.22-generic 3.16.2 Uname: Linux 3.16.0-16-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sat Sep 20 11:17:41 2014 DistUpgraded: 2014-09-02 14:59:08,481 DEBUG failed to SystemUnLock() (E:Not locked) DistroCodename: utopic DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:21fa] MachineType: LENOVO 23301B9 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-16-generic root=/dev/mapper/hostname--vg-root ro splash quiet crashkernel=384M-:128M crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M vt.handoff=7 SourcePackage: mesa UpgradeStatus: Upgraded to utopic on 2014-09-02 (17 days ago) dmi.bios.date: 07/09/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET95WW (2.55 ) dmi.board.asset.tag: Not Available dmi.board.name: 23301B9 dmi.board.vendor: LENOVO dmi.board.version: 0B98401 Pro dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET95WW(2.55):bd07/09/2013:svnLENOVO:pn23301B9:pvrThinkPadX230:rvnLENOVO:rn23301B9:rvr0B98401Pro:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23301B9 dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.2.6-1ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.2.6-1ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Fri Sep 19 15:45:16 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id4204 vendor AUO xserver.version: 2:1.16.0-1ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/chromium-browser/+bug/1371834/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1371834] Re: Chrome causes segfault in i965_dri.so
Btw. Those result were from a test in ubuntu 12.04.5 on both the 3.13 (trusty) and the 3.2 (precise) kernel and libgl1-mesa-dri 8.0.4-0ubuntu0.7 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to mesa in Ubuntu. https://bugs.launchpad.net/bugs/1371834 Title: Chrome causes segfault in i965_dri.so Status in Chromium Browser: Unknown Status in “mesa” package in Ubuntu: Confirmed Status in Debian GNU/Linux: New Bug description: Running chrome 38.0.2125.66-1 on Ubuntu 14.10, on Lenovo X230 When I start a new instance of chrome, it cannot enable WebGL. I have reported that bug separately to chrome at https://code.google.com/p/chromium/issues/detail?id=416207 I suspect the cause of the bug is in mesa, as dmesg contains evidence of a segfault: [31979.398090] chrome[24013]: segfault at 20 ip 7fbbd5ca5d83 sp 7fffd7669ab0 error 4 in i965_dri.so[7fbbd59c4000+50a000] [31979.585606] chrome[24104]: segfault at 20 ip 7f7550c26d83 sp 7fff970b4630 error 4 in i965_dri.so[7f7550945000+50a000] [31979.737378] chrome[24117]: segfault at 20 ip 7ffd06e45d83 sp 7fffc989f440 error 4 in i965_dri.so[7ffd06b64000+50a000] ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: libgl1-mesa-dri 10.2.6-1ubuntu3 ProcVersionSignature: Ubuntu 3.16.0-16.22-generic 3.16.2 Uname: Linux 3.16.0-16-generic x86_64 ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sat Sep 20 11:17:41 2014 DistUpgraded: 2014-09-02 14:59:08,481 DEBUG failed to SystemUnLock() (E:Not locked) DistroCodename: utopic DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:21fa] MachineType: LENOVO 23301B9 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-16-generic root=/dev/mapper/hostname--vg-root ro splash quiet crashkernel=384M-:128M crashkernel=384M-:128M nomdmonddf nomdmonisw crashkernel=384M-:128M vt.handoff=7 SourcePackage: mesa UpgradeStatus: Upgraded to utopic on 2014-09-02 (17 days ago) dmi.bios.date: 07/09/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET95WW (2.55 ) dmi.board.asset.tag: Not Available dmi.board.name: 23301B9 dmi.board.vendor: LENOVO dmi.board.version: 0B98401 Pro dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET95WW(2.55):bd07/09/2013:svnLENOVO:pn23301B9:pvrThinkPadX230:rvnLENOVO:rn23301B9:rvr0B98401Pro:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 23301B9 dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.2.6-1ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.2.6-1ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Fri Sep 19 15:45:16 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id4204 vendor AUO xserver.version: 2:1.16.0-1ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/chromium-browser/+bug/1371834/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1382865] Re: Dell Latitude E6330 Touchpad stops working
I seem to have the same problem on a Dell Latitude e7440 since the update to 14.10. After some time the touchpad and the trackpoint stop working, i.e., the mouse cursor is frozen and there's no reaction to clicks. Similar to the reporter Xorg.0.log contains the following error: [...] (EE) AlpsPS/2 ALPS GlidePoint: Read error 19 [11.296] (II) config/udev: removing device AlpsPS/2 ALPS GlidePoint [11.320] (II) UnloadModule: synaptics [...] I noticed, that the touchpad is functional again after waking up from suspend (e.g. by closing the lid). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-input-synaptics in Ubuntu. https://bugs.launchpad.net/bugs/1382865 Title: Dell Latitude E6330 Touchpad stops working Status in “xserver-xorg-input-synaptics” package in Ubuntu: Confirmed Bug description: After login, at some point the touchpad stops working. Have to use a USB mouse, which works fine. $ lsb_release -rd Description: Ubuntu 14.10 Release: 14.10 Will attach files per instructions here https://wiki.ubuntu.com/DebuggingTouchpadDetection ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xserver-xorg-input-synaptics 1.8.1-1ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-23.30-generic 3.16.4 Uname: Linux 3.16.0-23-generic x86_64 ApportVersion: 2.14.7-0ubuntu7 Architecture: amd64 Date: Sat Oct 18 15:42:48 2014 DistUpgraded: 2014-09-26 07:30:34,394 DEBUG enabling apt cron job DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 DistroCodename: utopic DistroVariant: ubuntu InstallationDate: Installed on 2013-09-17 (396 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120703-15:08 MachineType: Dell Inc. Latitude E6330 ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=C SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-23-generic root=UUID=870ded82-2482-4ff3-a3f1-5258247f795f ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-input-synaptics UpgradeStatus: Upgraded to utopic on 2014-09-26 (22 days ago) dmi.bios.date: 05/20/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A10 dmi.board.name: 0YRP01 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA10:bd05/20/2013:svnDellInc.:pnLatitudeE6330:pvr01:rvnDellInc.:rn0YRP01:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E6330 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Sat Oct 18 14:21:14 2014 xserver.configfile: default xserver.errors: AlpsPS/2 ALPS DualPoint TouchPad: Read error 19 xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 12588 vendor AUO xserver.version: 2:1.16.0-1ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/1382865/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390537] Re: gdm depends on evolution-data-server-common
Thank you for taking the time to report this bug and helping to make Ubuntu better. gdm doesnt depend on evolution-data-server, it depends on gnome-shell (which draws the login screen). evolution-data-server is a hard dependency of gnome-shell, so you can't remove it. ** Changed in: gdm (Ubuntu) Status: New = Incomplete ** Changed in: gdm (Ubuntu) Status: Incomplete = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gdm in Ubuntu. https://bugs.launchpad.net/bugs/1390537 Title: gdm depends on evolution-data-server-common Status in “gdm” package in Ubuntu: Invalid Bug description: lsb_release -rd Description: Ubuntu 14.04.1 LTS Release: 14.04 apt-cache policy gdm gdm: Εγκατεστημένα: 3.10.0.1-0ubuntu3 Υποψήφιο: 3.10.0.1-0ubuntu3 Πίνακας Έκδοσης: *** 3.10.0.1-0ubuntu3 0 500 http://gr.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages 100 /var/lib/dpkg/status uname -a Linux ilias-desktop 3.13.0-39-generic #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux evolution-data-server-common version 3.10.4-0ubuntu1.5 to totally remove evolution-data-server-common and/or requires removing also gdm. But since: The data server, called Evolution Data Server is responsible for managing mail, calendar, addressbook, tasks and memo information. why gdm depends on it? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm/+bug/1390537/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390618] Re: Uniy8 crashed when creating a wireless connection with an access point
The stack trace, it seems to be actually a bug on media-hub/dbus-cpp. #0 __libc_do_syscall () at ../ports/sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:44 44 ../ports/sysdeps/unix/sysv/linux/arm/libc-do-syscall.S: No such file or directory. (gdb) bt full #0 __libc_do_syscall () at ../ports/sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:44 No locals. #1 0xb6154e5e in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 _a1 = 0 _a3tmp = 6 _a1tmp = 0 _a3 = 6 _nametmp = 268 _a2tmp = 3747 _a2 = 3747 _name = 268 _sys_result = optimized out pd = 0xb6f77000 pid = 0 selftid = 3747 #2 0xb6155b4e in __GI_abort () at abort.c:89 save_stage = 2 act = {__sigaction_handler = {sa_handler = 0x0, sa_sigaction = 0x0}, sa_mask = {__val = {1, 3055655487, 3055655416, 3055255819, 3055022821, 3069680328, 3069669376, 3069680504, 3069669376, 3055841280, 729240, 0, 1, 33527928, 40034132, 3069594101, 3069680504, 1, 5, 0, 3198701360, 3054717864, 1, 3055656472, 1, 36773876, 3056202129, 40338480, 3198701360, 3069612528, 40338360, 3069670608}}, sa_flags = 1, sa_restorer = 0x0} sigs = {__val = {32, 0 repeats 31 times}} #3 0xb62920fc in __gnu_cxx::__verbose_terminate_handler () at ../../../../src/libstdc++-v3/libsupc++/vterminate.cc:84 w = optimized out exc = @0x0: error reading variable name = optimized out terminating = true t = optimized out #4 0xb6290920 in std::rethrow_exception (ep=...) at ../../../../src/libstdc++-v3/libsupc++/eh_ptr.cc:246 obj = optimized out dep = 0x2678430 #5 0xb6290b96 in __GXX_INIT_PRIMARY_EXCEPTION_CLASS (c=0xb629091f std::rethrow_exception(std::__exception_ptr::exception_ptr)+86 b\204\370#\020\204\370$\020\204\370% \204\370 \340`(F\374\367\220\350(F\373\367\200\352\375\367, incomplete sequence \352) at ../../../../src/libstdc++-v3/libsupc++/unwind-cxx.h:271 No locals. #6 __cxxabiv1::__cxa_throw (obj=0xb6290977 std::set_terminate(void (*)())+30, tinfo=0xb62f7260 typeinfo for std::runtime_error, dest=0xb629f191 std::out_of_range::~out_of_range()+4) at ../../../../src/libstdc++-v3/libsupc++/eh_throw.cc:76 globals = optimized out #7 0xad96371e in core::dbus::Bus::remove_match (this=optimized out, rule=...) at /build/buildd/dbus-cpp-4.2.0+15.04.20141105/src/core/dbus/bus.cpp:317 se = {d = std::unique_ptrcore::dbus::Error::Private containing 0x29c85f8} #8 0xad96d3d2 in core::dbus::Service::remove_match (this=this@entry=0x1ff9878, rule=...) at /build/buildd/dbus-cpp-4.2.0+15.04.20141105/src/core/dbus/service.cpp:82 No locals. #9 0xa7bd1852 in remove_match (rule=..., this=optimized out) at /usr/include/core/dbus/impl/object.h:331 No locals. #10 ~Signal (this=0x25635f0, __in_chrg=optimized out) at /usr/include/core/dbus/impl/signal.h:35 No locals. #11 std::_Sp_counted_ptrcore::dbus::Signalmpris::Player::Signals::EndOfStream, void*, (__gnu_cxx::_Lock_policy)2::_M_dispose (this=optimized out) at /usr/include/c++/4.9/bits/shared_ptr_base.h:373 No locals. #12 0xa7bafb92 in std::_Sp_counted_base(__gnu_cxx::_Lock_policy)2::_M_release (this=0x26ed138) at /usr/include/c++/4.9/bits/shared_ptr_base.h:149 No locals. #13 0xa7bac65e in ~__shared_count (this=0x26a8ea4, __in_chrg=optimized out) at /usr/include/c++/4.9/bits/shared_ptr_base.h:666 No locals. #14 ~__shared_ptr (this=0x26a8ea0, __in_chrg=optimized out) at /usr/include/c++/4.9/bits/shared_ptr_base.h:914 No locals. #15 ~shared_ptr (this=0x26a8ea0, __in_chrg=optimized out) at /usr/include/c++/4.9/bits/shared_ptr.h:93 No locals. #16 ~DBus (this=0x26a8e98, __in_chrg=optimized out) at /build/buildd/media-hub-2.0.0+15.04.20141105.1/src/core/media/player_stub.cpp:238 No locals. #17 ~Signals (this=0x26a8e70, __in_chrg=optimized out) at /build/buildd/media-hub-2.0.0+15.04.20141105.1/src/core/media/player_stub.cpp:173 No locals. #18 ~Private (this=0x26a8da0, __in_chrg=optimized out) at /build/buildd/media-hub-2.0.0+15.04.20141105.1/src/core/media/player_stub.cpp:95 No locals. #19 operator() (this=optimized out, __ptr=0x26a8da0) at /usr/include/c++/4.9/bits/unique_ptr.h:76 No locals. #20 ~unique_ptr (this=0x26f3b0c, __in_chrg=optimized out) at /usr/include/c++/4.9/bits/unique_ptr.h:236 No locals. #21 core::ubuntu::media::PlayerStub::~PlayerStub (this=0x26f3b00, __in_chrg=optimized out) at /build/buildd/media-hub-2.0.0+15.04.20141105.1/src/core/media/player_stub.cpp:255 No locals. #22 0xa7bac6c8 in core::ubuntu::media::PlayerStub::~PlayerStub (this=0x26f3b00, __in_chrg=optimized out) at /build/buildd/media-hub-2.0.0+15.04.20141105.1/src/core/media/player_stub.cpp:257 No locals. ---Type return to continue, or q return to quit--- #23 0xa8558cfc in maybeSpace (this=0xb6f81f10 __stack_chk_guard) at /usr/include/arm-linux-gnueabihf/qt5/QtCore/qdebug.h:99 No locals. #24 operator (t=0xa8563048 Streams are
[Desktop-packages] [Bug 1382865] Re: Dell Latitude E6330 Touchpad stops working
I never noticed, but this is same situation for me: the touchpad is functional again after waking up from suspend (e.g. by closing the lid) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-input-synaptics in Ubuntu. https://bugs.launchpad.net/bugs/1382865 Title: Dell Latitude E6330 Touchpad stops working Status in “xserver-xorg-input-synaptics” package in Ubuntu: Confirmed Bug description: After login, at some point the touchpad stops working. Have to use a USB mouse, which works fine. $ lsb_release -rd Description: Ubuntu 14.10 Release: 14.10 Will attach files per instructions here https://wiki.ubuntu.com/DebuggingTouchpadDetection ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xserver-xorg-input-synaptics 1.8.1-1ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-23.30-generic 3.16.4 Uname: Linux 3.16.0-23-generic x86_64 ApportVersion: 2.14.7-0ubuntu7 Architecture: amd64 Date: Sat Oct 18 15:42:48 2014 DistUpgraded: 2014-09-26 07:30:34,394 DEBUG enabling apt cron job DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 DistroCodename: utopic DistroVariant: ubuntu InstallationDate: Installed on 2013-09-17 (396 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120703-15:08 MachineType: Dell Inc. Latitude E6330 ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=C SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-23-generic root=UUID=870ded82-2482-4ff3-a3f1-5258247f795f ro quiet splash vt.handoff=7 SourcePackage: xserver-xorg-input-synaptics UpgradeStatus: Upgraded to utopic on 2014-09-26 (22 days ago) dmi.bios.date: 05/20/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A10 dmi.board.name: 0YRP01 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA10:bd05/20/2013:svnDellInc.:pnLatitudeE6330:pvr01:rvnDellInc.:rn0YRP01:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: Latitude E6330 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Sat Oct 18 14:21:14 2014 xserver.configfile: default xserver.errors: AlpsPS/2 ALPS DualPoint TouchPad: Read error 19 xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 12588 vendor AUO xserver.version: 2:1.16.0-1ubuntu1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/1382865/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1389888] Re: unity not shown only desktop with new nvida 970 card
** Changed in: unity Status: New = Fix Released ** Changed in: unity (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1389888 Title: unity not shown only desktop with new nvida 970 card Status in Unity: Fix Released Status in “unity” package in Ubuntu: Fix Released Bug description: Hi I have a new Nvidia 970 card. This card is supported starting nvidia-343, so I installed them using ppa:xorg-edgers/ppa . After a reboot I see the login screen, I'm able to login but the top-right menu and the unity bar on the left side is missing. But I'm able to see my mouse and on a right-click I get a pop-menu. What I've done so far: - reinstalled ubuntu-desktop unity compizconfig-settings-manager I'm added my log files to help you. Can I do anything else to help you? I hope you can help me. To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1389888/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390619] [NEW] Can't add launcher icon for git gui
Public bug reported: This is a usability issue in 2 parts: 1. I would like to add a Launcher icon for git-gui, however when I use the 'Lock to Launcher' option and close the GUI, the launcher icon disappears. 2. There is no easy way to create a custom launcher icon (Creating a .desktop file in a non-obvious location is not an easy way! Not least because I have no idea what icon to use, and the default icon is gly!) I'm assuming my system info is filed with this bug via apport, but just in case, I am on Ubuntu 14.04 (Unity 7) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity 7.2.2+14.04.20140714-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.13.0-32.57-lowlatency 3.13.11.4 Uname: Linux 3.13.0-32-lowlatency x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CurrentDesktop: Unity Date: Fri Nov 7 20:47:27 2014 InstallationDate: Installed on 2013-11-03 (368 days ago) InstallationMedia: Ubuntu-Studio 13.10 Saucy Salamander - Release amd64 (20131016.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: unity UpgradeStatus: Upgraded to trusty on 2014-04-26 (195 days ago) ** Affects: unity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1390619 Title: Can't add launcher icon for git gui Status in “unity” package in Ubuntu: New Bug description: This is a usability issue in 2 parts: 1. I would like to add a Launcher icon for git-gui, however when I use the 'Lock to Launcher' option and close the GUI, the launcher icon disappears. 2. There is no easy way to create a custom launcher icon (Creating a .desktop file in a non-obvious location is not an easy way! Not least because I have no idea what icon to use, and the default icon is gly!) I'm assuming my system info is filed with this bug via apport, but just in case, I am on Ubuntu 14.04 (Unity 7) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: unity 7.2.2+14.04.20140714-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.13.0-32.57-lowlatency 3.13.11.4 Uname: Linux 3.13.0-32-lowlatency x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CurrentDesktop: Unity Date: Fri Nov 7 20:47:27 2014 InstallationDate: Installed on 2013-11-03 (368 days ago) InstallationMedia: Ubuntu-Studio 13.10 Saucy Salamander - Release amd64 (20131016.1) ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: unity UpgradeStatus: Upgraded to trusty on 2014-04-26 (195 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1390619/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390623] [NEW] VPN with IPv6 connectivity but no IPv6 DNS server results in broken DNS config
Public bug reported: When connecting to a VPN that provides both a default route over IPv4 and IPv6, but only DNS servers over IPv4, you can end up with the IPv4 DNS servers set up as split DNS. When that happens, the user is left without a working DNS configuration. See the attached log file for an example. I think the cause is that the patch for avoiding split DNS on VPNs with default routes[1] stops looking when it finds the first VPN configuration with a default route. If that configuration happens to be the IPv6-side of the VPN connection, then it will still add the IPv4 configuration with split DNS. A workaround is to simply add a IPv6 DNS server to the configuration in addition to the IPv4 DNS servers. In that case, the IPv6 DNS server is added without split DNS. This has been tested with both Ubuntu 14.04 LTS and Xubuntu 14.04. Package versions (on Xubuntu 14.04): network-manager 0.9.8.8-0ubuntu7 network-manager-openvpn 0.9.8.2-1ubuntu4 openvpn 2.3.2-7ubuntu3 [1] http://bazaar.launchpad.net/~network-manager/network- manager/ubuntu/view/head:/debian/patches/dnsmasq-vpn-dns-filtering.patch ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Attachment added: Log from VPN DNS setup https://bugs.launchpad.net/bugs/1390623/+attachment/4255469/+files/vpnlog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1390623 Title: VPN with IPv6 connectivity but no IPv6 DNS server results in broken DNS config Status in “network-manager” package in Ubuntu: New Bug description: When connecting to a VPN that provides both a default route over IPv4 and IPv6, but only DNS servers over IPv4, you can end up with the IPv4 DNS servers set up as split DNS. When that happens, the user is left without a working DNS configuration. See the attached log file for an example. I think the cause is that the patch for avoiding split DNS on VPNs with default routes[1] stops looking when it finds the first VPN configuration with a default route. If that configuration happens to be the IPv6-side of the VPN connection, then it will still add the IPv4 configuration with split DNS. A workaround is to simply add a IPv6 DNS server to the configuration in addition to the IPv4 DNS servers. In that case, the IPv6 DNS server is added without split DNS. This has been tested with both Ubuntu 14.04 LTS and Xubuntu 14.04. Package versions (on Xubuntu 14.04): network-manager 0.9.8.8-0ubuntu7 network-manager-openvpn 0.9.8.2-1ubuntu4 openvpn 2.3.2-7ubuntu3 [1] http://bazaar.launchpad.net/~network-manager/network- manager/ubuntu/view/head:/debian/patches/dnsmasq-vpn-dns- filtering.patch To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1390623/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1390625] [NEW] mouse cursor gets corrupted
Public bug reported: In Ubuntu 14.10, the mouse cursor graphic gets corrupted under certain occasions. It then looks flipped, sheared or shows fragments of a previews cursor. * when switching the cursor them forth and back in Gnome Tweak Tool * when dragdropping a document icon Maybe related, the cursor does not always show the correct image scale on a high-dpi display (this was working right in 14.04). For example after login, or when hovering specific areas, or on mouse down to start a dragdrop, the cursor appears 1/4 the expected size. Attached is a photo of a corrupted cursor (whereas a screenshot with Gimp showed the uncorrupted cursor). ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: unity 7.3.1+14.10.20141016-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 BootLog: * Setting up X socket directories... [400G [394G[ OK ] CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Fri Nov 7 22:12:52 2014 DistUpgraded: 2014-11-04 18:35:56,188 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu EcryptfsInUse: Yes GraphicsCard: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:3978] InstallationDate: Installed on 2014-02-02 (278 days ago) InstallationMedia: Ubuntu-GNOME 14.04 Trusty Tahr - Alpha amd64 (20140201) MachineType: LENOVO 20266 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic.efi.signed root=UUID=4bfb3686-b9f7-487d-81f6-eceb41097ad9 ro quiet splash acpi_backlight=vendor SourcePackage: unity UpgradeStatus: Upgraded to utopic on 2014-11-04 (3 days ago) dmi.bios.date: 10/31/2013 dmi.bios.vendor: LENOVO dmi.bios.version: 76CN31WW dmi.board.asset.tag: No Asset Tag dmi.board.name: Yoga2 dmi.board.vendor: LENOVO dmi.board.version: 31900058STD dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo Yoga 2 Pro dmi.modalias: dmi:bvnLENOVO:bvr76CN31WW:bd10/31/2013:svnLENOVO:pn20266:pvrLenovoYoga2Pro:rvnLENOVO:rnYoga2:rvr31900058STD:cvnLENOVO:ct10:cvrLenovoYoga2Pro: dmi.product.name: 20266 dmi.product.version: Lenovo Yoga 2 Pro dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Fri Nov 7 14:54:59 2014 xserver.configfile: /etc/X11/xorg.conf xserver.errors: [dix] ELAN Touchscreen: unable to find touch point 1 xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 16970 vendor SDC xserver.version: 2:1.16.0-1ubuntu1 ** Affects: unity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 third-party-packages ubuntu utopic ** Attachment added: photo of a corrupted cursor https://bugs.launchpad.net/bugs/1390625/+attachment/4255470/+files/20141107_171621.jpg -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1390625 Title: mouse cursor gets corrupted Status in “unity” package in Ubuntu: New Bug description: In Ubuntu 14.10, the mouse cursor graphic gets corrupted under certain occasions. It then looks flipped, sheared or shows fragments of a previews cursor. * when switching the cursor them forth and back in Gnome Tweak Tool * when dragdropping a document icon Maybe related, the cursor does not always show the correct image scale on a high-dpi display (this was working right in 14.04). For example after login, or when hovering specific areas, or on mouse down to start a dragdrop, the cursor appears 1/4 the expected size. Attached is a photo of a corrupted cursor (whereas a screenshot with Gimp showed the uncorrupted cursor). ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: unity 7.3.1+14.10.20141016-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64
[Desktop-packages] [Bug 1390626] [NEW] [945GCT-M, SigmaTel STAC9221 A2, Black SPDIF Out, Rear] No sound at all
Public bug reported: no reconoce la tarjeta interna de audio ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: saul 1900 F pulseaudio /dev/snd/controlC0: saul 1900 F pulseaudio CurrentDesktop: Unity Date: Fri Nov 7 16:23:09 2014 InstallationDate: Installed on 2014-08-08 (91 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) ProcEnviron: LANGUAGE=es_CO:es PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=es_CO.UTF-8 SHELL=/bin/bash SourcePackage: pulseaudio Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel successful Symptom_Card: Audio Interno - HDA Intel Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: saul 1900 F pulseaudio /dev/snd/controlC0: saul 1900 F pulseaudio Symptom_Jack: Black SPDIF Out, Rear Symptom_PulsePlaybackTest: PulseAudio playback test failed Symptom_Type: No sound at all Title: [945GCT-M, SigmaTel STAC9221 A2, Black SPDIF Out, Rear] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/14/2007 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 080012 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 945GCT-M dmi.board.vendor: Intel dmi.board.version: 2.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: ECS dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr080012:bd06/14/2007:svnECS:pn945GCT-M:pvr2.0:rvnIntel:rn945GCT-M:rvr2.0:cvnECS:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: 945GCT-M dmi.product.version: 2.0 dmi.sys.vendor: ECS ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1390626 Title: [945GCT-M, SigmaTel STAC9221 A2, Black SPDIF Out, Rear] No sound at all Status in “pulseaudio” package in Ubuntu: New Bug description: no reconoce la tarjeta interna de audio ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: pulseaudio 1:4.0-0ubuntu11 ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8 Uname: Linux 3.13.0-39-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: saul 1900 F pulseaudio /dev/snd/controlC0: saul 1900 F pulseaudio CurrentDesktop: Unity Date: Fri Nov 7 16:23:09 2014 InstallationDate: Installed on 2014-08-08 (91 days ago) InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2) ProcEnviron: LANGUAGE=es_CO:es PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=es_CO.UTF-8 SHELL=/bin/bash SourcePackage: pulseaudio Symptom: audio Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Intel successful Symptom_Card: Audio Interno - HDA Intel Symptom_DevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: saul 1900 F pulseaudio /dev/snd/controlC0: saul 1900 F pulseaudio Symptom_Jack: Black SPDIF Out, Rear Symptom_PulsePlaybackTest: PulseAudio playback test failed Symptom_Type: No sound at all Title: [945GCT-M, SigmaTel STAC9221 A2, Black SPDIF Out, Rear] No sound at all UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/14/2007 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 080012 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 945GCT-M dmi.board.vendor: Intel dmi.board.version: 2.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: ECS dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr080012:bd06/14/2007:svnECS:pn945GCT-M:pvr2.0:rvnIntel:rn945GCT-M:rvr2.0:cvnECS:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: 945GCT-M dmi.product.version: 2.0 dmi.sys.vendor: ECS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1390626/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1263326]
The steps noted in the Description https://bugs.freedesktop.org/show_bug.cgi?id=72969#c0 are still confirmed verbatim in MASTER: Version: 4.4.0.0.alpha1+ Build ID: b7d8a58ff2698ffc6e22943f64aa97c5ea253bd9 TinderBox: Win-x86@42, Branch:master, Time: 2014-11-05_00:40:38 Microsoft Windows Vista Business x86 6.0.6002 Service Pack 2 Build 6002 As I'm a member of LibreOffice QA, I've marked myself the QA contact if you would have any further questions on the scope of this report. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1263326 Title: [Upstream] IF function not evaluating correctly with cell borders in .ods Status in LibreOffice Productivity Suite: Confirmed Status in “libreoffice” package in Ubuntu: Triaged Bug description: 1) lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 2) apt-cache policy libreoffice-calc libreoffice-calc: Installed: 1:4.1.3-0ubuntu2 Candidate: 1:4.1.3-0ubuntu2 Version table: *** 1:4.1.3-0ubuntu2 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status 3) What is expected to happen via a terminal: cd ~/Desktop wget https://bugs.launchpad.net/df-libreoffice/+bug/1263326/+attachment/3934242/+files/bug-format-affects-value.ods localc --nologo bug-format-affects-value.ods is that cells C1 and C2 both show Passed. 4) What happens instead is that cell C2 shows Failed. WORKAROUND: Insert a row, and then remove the row. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: libreoffice-calc 1:4.1.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Sat Dec 21 07:59:29 2013 InstallationDate: Installed on 2012-11-18 (397 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MarkForUpload: True ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: libreoffice UpgradeStatus: Upgraded to saucy on 2013-11-10 (40 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1263326/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1263326]
Apologies Christopher - didn't recognize your name :) Thanks for confirming! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1263326 Title: [Upstream] IF function not evaluating correctly with cell borders in .ods Status in LibreOffice Productivity Suite: Confirmed Status in “libreoffice” package in Ubuntu: Triaged Bug description: 1) lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 2) apt-cache policy libreoffice-calc libreoffice-calc: Installed: 1:4.1.3-0ubuntu2 Candidate: 1:4.1.3-0ubuntu2 Version table: *** 1:4.1.3-0ubuntu2 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status 3) What is expected to happen via a terminal: cd ~/Desktop wget https://bugs.launchpad.net/df-libreoffice/+bug/1263326/+attachment/3934242/+files/bug-format-affects-value.ods localc --nologo bug-format-affects-value.ods is that cells C1 and C2 both show Passed. 4) What happens instead is that cell C2 shows Failed. WORKAROUND: Insert a row, and then remove the row. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: libreoffice-calc 1:4.1.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Sat Dec 21 07:59:29 2013 InstallationDate: Installed on 2012-11-18 (397 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MarkForUpload: True ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: libreoffice UpgradeStatus: Upgraded to saucy on 2013-11-10 (40 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1263326/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1263326]
There is some confusion about this issue as Kohei couldn't reproduce. Moving to UNCONFIRMED to get fresh eyes on it. Thanks for understanding. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1263326 Title: [Upstream] IF function not evaluating correctly with cell borders in .ods Status in LibreOffice Productivity Suite: Confirmed Status in “libreoffice” package in Ubuntu: Triaged Bug description: 1) lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 2) apt-cache policy libreoffice-calc libreoffice-calc: Installed: 1:4.1.3-0ubuntu2 Candidate: 1:4.1.3-0ubuntu2 Version table: *** 1:4.1.3-0ubuntu2 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status 3) What is expected to happen via a terminal: cd ~/Desktop wget https://bugs.launchpad.net/df-libreoffice/+bug/1263326/+attachment/3934242/+files/bug-format-affects-value.ods localc --nologo bug-format-affects-value.ods is that cells C1 and C2 both show Passed. 4) What happens instead is that cell C2 shows Failed. WORKAROUND: Insert a row, and then remove the row. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: libreoffice-calc 1:4.1.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Sat Dec 21 07:59:29 2013 InstallationDate: Installed on 2012-11-18 (397 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MarkForUpload: True ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: libreoffice UpgradeStatus: Upgraded to saucy on 2013-11-10 (40 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1263326/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1263326] Re: [Upstream] IF function not evaluating correctly with cell borders in .ods
** Bug watch added: freedesktop.org Bugzilla #72969 https://bugs.freedesktop.org/show_bug.cgi?id=72969 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1263326 Title: [Upstream] IF function not evaluating correctly with cell borders in .ods Status in LibreOffice Productivity Suite: Confirmed Status in “libreoffice” package in Ubuntu: Triaged Bug description: 1) lsb_release -rd Description: Ubuntu Trusty Tahr (development branch) Release: 14.04 2) apt-cache policy libreoffice-calc libreoffice-calc: Installed: 1:4.1.3-0ubuntu2 Candidate: 1:4.1.3-0ubuntu2 Version table: *** 1:4.1.3-0ubuntu2 0 500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status 3) What is expected to happen via a terminal: cd ~/Desktop wget https://bugs.launchpad.net/df-libreoffice/+bug/1263326/+attachment/3934242/+files/bug-format-affects-value.ods localc --nologo bug-format-affects-value.ods is that cells C1 and C2 both show Passed. 4) What happens instead is that cell C2 shows Failed. WORKAROUND: Insert a row, and then remove the row. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: libreoffice-calc 1:4.1.3-0ubuntu1 ProcVersionSignature: Ubuntu 3.11.0-14.21-generic 3.11.7 Uname: Linux 3.11.0-14-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Sat Dec 21 07:59:29 2013 InstallationDate: Installed on 2012-11-18 (397 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MarkForUpload: True ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: libreoffice UpgradeStatus: Upgraded to saucy on 2013-11-10 (40 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1263326/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1366351] Re: compiz crashed with SIGSEGV in g_closure_invoke() if unity-settings-daemon goes away
I downloaded a new .iso. same bug occurred on both booting the .iso and booting the install. In Comment #70 Marco suggested: Can you please open another bug (like unity crashes in unity::UnityScreen::paintDisplay, using ubuntu-bug /var/crash/_usr_bin_compiz.1000.crash)? Does not work. I get the drop down window Sorry. ubuntu has experienced an internal error... I select Continue, and nothing visible happens. There are two new files: _usr_bin_compiz.1000.upload _usr_bin_compiz.1000.uploaded but a bug is never processed. I think ubuntu-bug has found a way to reduce the number of bugs reported Thanks anyway, Jerry -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to compiz in Ubuntu. https://bugs.launchpad.net/bugs/1366351 Title: compiz crashed with SIGSEGV in g_closure_invoke() if unity-settings- daemon goes away Status in Compiz: Invalid Status in Unity: Fix Committed Status in “compiz” package in Ubuntu: Invalid Status in “unity” package in Ubuntu: Fix Released Bug description: Compiz crashes when unity-settings-daemon goes away. Simple reproducer: killall -SEGV unity-settings-daemon. ProblemType: Crash DistroRelease: Ubuntu 14.10 Package: compiz-core 1:0.9.12+14.10.20140812-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-13.19-generic 3.16.1 Uname: Linux 3.16.0-13-generic x86_64 NonfreeKernelModules: fglrx .tmp.unity.support.test.0: ApportVersion: 2.14.7-0ubuntu2 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Sat Sep 6 10:48:43 2014 Disassembly: = 0x0: Cannot access memory at address 0x0 DistUpgraded: 2014-09-01 18:03:23,330 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu ExecutablePath: /usr/bin/compiz GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Curacao XT [Radeon R9 270X] [1002:6810] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:04a1] InstallationDate: Installed on 2014-03-24 (166 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) MachineType: MSI MS-7640 ProcCmdline: compiz ProcEnviron: PATH=(custom, no user) SHELL=/bin/bash LD_LIBRARY_PATH=set LANG=en_US.UTF-8 XDG_RUNTIME_DIR=set ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-13-generic root=UUID=2696ea28-d88b-431c-a1fa-1e0f297ee664 ro quiet splash vt.handoff=7 SegvAnalysis: Segfault happened at: 0x0: Cannot access memory at address 0x0 PC (0x) not located in a known VMA region (needed executable region)! SegvReason: executing NULL VMA Signal: 11 SourcePackage: compiz StacktraceTop: ?? () g_closure_invoke () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit_valist () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: compiz crashed with SIGSEGV in g_closure_invoke() UpgradeStatus: Upgraded to utopic on 2014-09-01 (4 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 10/31/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V1.15 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 890FXA-GD70 (MS-7640) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV1.15:bd10/31/2012:svnMSI:pnMS-7640:pvr1.0:rvnMSI:rn890FXA-GD70(MS-7640):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.name: MS-7640 dmi.product.version: 1.0 dmi.sys.vendor: MSI version.compiz: compiz 1:0.9.12+14.10.20140812-0ubuntu1 version.fglrx-installer: fglrx-installer N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.2.6-1ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.2.6-1ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu9 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu1 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Sat Sep 6 10:48:05 2014 xserver.configfile: default xserver.errors: open /dev/dri/card0: No such file or directory AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object
[Desktop-packages] [Bug 1390637] [NEW] newest libxml2 update in vivid breaks libvirt build
Public bug reported: Building libvirt in vivid currently results in qemuxml2argvtest failing. It says that it expected a '\\V' and got a 'V' Downgrading by doing dpkg -i libxml2_2.9.1+dfsg1-3ubuntu4.4_amd64.deb allows the build to complete. ** Affects: libxml2 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libxml2 in Ubuntu. https://bugs.launchpad.net/bugs/1390637 Title: newest libxml2 update in vivid breaks libvirt build Status in “libxml2” package in Ubuntu: New Bug description: Building libvirt in vivid currently results in qemuxml2argvtest failing. It says that it expected a '\\V' and got a 'V' Downgrading by doing dpkg -i libxml2_2.9.1+dfsg1-3ubuntu4.4_amd64.deb allows the build to complete. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libxml2/+bug/1390637/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1389858] Re: Libreoffice calc 4.2.7-0ubuntu1 not updating references after sort
As a clarification TDFs 4.2.7 release _does_ update references, while Ubuntus 4.2.7-0ubuntu1 by default does not (see comment #17 on how to change that). So: - TDFs 4.2.7 release shows fdo#81633, but not fdo#81309 - Ubuntus 4.2.7-0ubuntu1 by default shows fdo#81309, but not fdo#81633 Both bugs are mutually exclusive. For completeness it shall be noted that the original poster on reddit complains about references not being updated after sort in Ubuntu 4.2.7-0ubuntu1 (so he agrees with the reporter of fdo#81309: Sorting should automatically adjust references.), to which the first commenter on reddit links to fdo#85614 against TDFs builds, which says: Sorting should automatically adjust references is an ill conceived enhancement.. Apparently these two reddit users are not aware that they have exactly opposing opinions on the expected behaviour. In fact, switching back Ubuntu default behaviour to the one of TDFs upstream 4.2.7 release by default, while making the reporters of fdo#81309 happy, would just exchange that for those who want fdo#81633 to be resolved. Repeating again: Comment #17 has a quick way to toggle the default behaviour. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/1389858 Title: Libreoffice calc 4.2.7-0ubuntu1 not updating references after sort Status in “libreoffice” package in Ubuntu: Triaged Bug description: Update to LibreOffice 4.2.7 is causing incorrect sort behaviour in Calc. As initially reported here: http://www.reddit.com/r/Ubuntu/comments/2le7qu/libreoffice_calc_update_a_few_hours_ago_is_buggy/ Attached is sample Calc document. To reproduce, highlight B6 to E14, select Sort and sort by Column D, see that column E didn't get sorted. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: libreoffice (not installed) ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: Unity Date: Wed Nov 5 15:49:03 2014 InstallationDate: Installed on 2013-11-26 (344 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) SourcePackage: libreoffice UpgradeStatus: Upgraded to utopic on 2014-10-08 (27 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1389858/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1075923] Re: nautilus hangs copying large directories from a samba share
Hello there this bug seems to resurface with version 1.20.1-1ubuntu1 The copy of large files fails (4GB) with a i/o error. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1075923 Title: nautilus hangs copying large directories from a samba share Status in GVFS: Fix Released Status in “gvfs” package in Ubuntu: Fix Released Status in “gvfs” source package in Precise: Invalid Status in “gvfs” source package in Raring: Fix Released Bug description: Impact: copies from/to samba share often end up hanging Test case: - visit a smb location in nautilus - copies data from/to it (some non trivial directories makes the issues easier to trigger) - the copy should complete without hanging Regression potentiel: Check that nautilus is still working correctly and than you don't have issues copying data from/to remote locations --- Problem === Copying files to and from samba shares (this includes Windows shares) is unreliable in Ubuntu 12.10 and Ubuntu 13.04 when using nautilus' integrated samba client (gvfs-smb): The copy randomly hangs after a few files or a few GB. Workaround == Until gvfs-smb is fixed, use the kernel samba client (cifs) that works reliably, is faster, but needs some terminal commands to get going: # sudo -s # mkdir /mnt/cifs # mount -t cifs -o user=YOUR_SAMBA_USER -o uid=YOUR_LINUX_USER //SAMBA_SERVER/SAMBA_SHARE /mnt/cifs It will ask for you password, you can then access the shared files at /mnt/cifs. To manage notifications about this bug go to: https://bugs.launchpad.net/gvfs/+bug/1075923/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1389904] Re: With the recent update to xserver-xorg-video-intel, system boots to a black screen
I tried a system-recovery boot of the '-39' kernel. I could 'drop to root prompt', and do apt-get commands, but on attempting that, it complained that it was not using a read-only lock file, and the apt-get commands would fail because it could not get the lock. The root command prompt is in my dvorak keyboard layout, so I can easily type things. What do I need to type to remove the latest version of the package (xserver-xorg-video-intel 2:2.99.910-0ubuntu1.2), so it goes back to using the xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version? If I could do that, I could at least verify that it is this package version that is causing the problem. At this point, I am only guessing that is the culprit. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1389904 Title: With the recent update to xserver-xorg-video-intel, system boots to a black screen Status in “xserver-xorg-video-intel” package in Ubuntu: Incomplete Bug description: The latest system updates for Lubuntu 14.04 includes an update to the i915 display driver, which this machine uses. After applying updates and rebooting, at the end of the boot process, where normally the login screen appears, the screen remains blank (with a black background color). That change has rendered my Lubuntu 14.04 partition completely unusable, even when booting earlier versions of the kernel. Regardless the kernel level booted, the system now boots to a blank screen. Because of this, I had to report the error on my UbuntuStudio 14.04 partition, to which I have not yet applied updates. So the level of the Intel i915 driver package in this error report is the version prior to the updated version that (probably) caused the problem. 1. The release of ubuntu with the problem is Lubuntu 14.04.1, with a kernel version ending in .39. 2. The last working version of xserver-xorg-video-intel is 2:2.99.910-0ubuntu1 I can't boot by Lubuntu partition anymore to tell you the version number that fails, but it is later than the indicated version. 3. Prior to installing system updates, my Lubuntu 14.04.01 system worked fine, and I was able to boot it and perform my suite of tests (it's a test system). After applying updates, it boots to a blank screen, and I cannot do anything with it. I expected the login screen to appear, but it doesn't, and there is no error message. 4. After applying system updates I expected my system to reboot normally, allowing me to login. Instead, a blank screen is displayed, with no error message, and the login screen does not appear after many minutes of waiting. If I hit the power button, it initiates shutdown. Hitting several keyboard characters (or typing my password to the blank screen) had no effect. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-32.57-lowlatency 3.13.11.4 Uname: Linux 3.13.0-32-lowlatency i686 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: i386 CurrentDesktop: XFCE Date: Wed Nov 5 16:13:54 2014 InstallationDate: Installed on 2014-04-28 (191 days ago) InstallationMedia: Ubuntu-Studio 14.04 LTS Trusty Tahr - Release i386 (20140416.3) SourcePackage: xserver-xorg-video-intel UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1389904/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1389336] Re: Use geoclue-2.0
Seb, That is correct its no longer possible to provide custom providers, so it would either require teaching the ubuntu GeoIP server the Geolocate API or merging ubuntu-geoip directly into geoclue as a location source. There was a one point a geoip client in geoclue-2.0 but it got dropped when GNOME switched to using Mozilla Location Service. It should be possible to do something similar for ubuntu-geoip support http://cgit.freedesktop.org/geoclue/commit/?id=b6563179f55b44b9b566c11c8c4bc0870d50879f -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to qtlocation-opensource-src in Ubuntu. https://bugs.launchpad.net/bugs/1389336 Title: Use geoclue-2.0 Status in “empathy” package in Ubuntu: New Status in “gnome-settings-daemon” package in Ubuntu: New Status in “libunity-webapps” package in Ubuntu: New Status in “qtlocation-opensource-src” package in Ubuntu: New Status in “ubuntu-geoip” package in Ubuntu: New Status in “webkitgtk” package in Ubuntu: New Bug description: Geoclue2 (source package geoclue-2.0) is a separate, parallel- installable version of geoclue1 (source package geoclue). We will likely shortly have both in main (see MIR bug 1388294) and it would be great to be able to demote geoclue1 to universe and only support one version of the service. The packages associated with this bug all have a reverse depends on geoclue1 in some form or patches to remove support for geoclue-2.0 because it wasn't in main yet (e.g. gnome-settings-daemon). Porting from geoclue-1.0 to 2.0 apparently isn't terribly trivial. But we have at least six months to do it. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/1389336/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1389904] Re: With the recent update to xserver-xorg-video-intel, system boots to a black screen
When I boot Lubuntu 14.10 from a live-USB, it appears to do the same thing as when I rebooted after the system updates. It goes through the boot process, displaying Lubuntu 14.10 with the 4 flashing dots (displayed in text-mode with a light-blue background). Eventually, the background changes to black, then some text messages flash-by (to quick to read), and then I get the blank, black screen (which doesn't respond to input) at the point I should see the Lubuntu live-USB desktop. When I hit the power button, it initiates shut-down, shutting-down normally. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1389904 Title: With the recent update to xserver-xorg-video-intel, system boots to a black screen Status in “xserver-xorg-video-intel” package in Ubuntu: Incomplete Bug description: The latest system updates for Lubuntu 14.04 includes an update to the i915 display driver, which this machine uses. After applying updates and rebooting, at the end of the boot process, where normally the login screen appears, the screen remains blank (with a black background color). That change has rendered my Lubuntu 14.04 partition completely unusable, even when booting earlier versions of the kernel. Regardless the kernel level booted, the system now boots to a blank screen. Because of this, I had to report the error on my UbuntuStudio 14.04 partition, to which I have not yet applied updates. So the level of the Intel i915 driver package in this error report is the version prior to the updated version that (probably) caused the problem. 1. The release of ubuntu with the problem is Lubuntu 14.04.1, with a kernel version ending in .39. 2. The last working version of xserver-xorg-video-intel is 2:2.99.910-0ubuntu1 I can't boot by Lubuntu partition anymore to tell you the version number that fails, but it is later than the indicated version. 3. Prior to installing system updates, my Lubuntu 14.04.01 system worked fine, and I was able to boot it and perform my suite of tests (it's a test system). After applying updates, it boots to a blank screen, and I cannot do anything with it. I expected the login screen to appear, but it doesn't, and there is no error message. 4. After applying system updates I expected my system to reboot normally, allowing me to login. Instead, a blank screen is displayed, with no error message, and the login screen does not appear after many minutes of waiting. If I hit the power button, it initiates shutdown. Hitting several keyboard characters (or typing my password to the blank screen) had no effect. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-32.57-lowlatency 3.13.11.4 Uname: Linux 3.13.0-32-lowlatency i686 ApportVersion: 2.14.1-0ubuntu3.2 Architecture: i386 CurrentDesktop: XFCE Date: Wed Nov 5 16:13:54 2014 InstallationDate: Installed on 2014-04-28 (191 days ago) InstallationMedia: Ubuntu-Studio 14.04 LTS Trusty Tahr - Release i386 (20140416.3) SourcePackage: xserver-xorg-video-intel UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1389904/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1075974] Re: nvidia driver install fails, etc, etc
** Changed in: nvidia-graphics-drivers-updates (Ubuntu) Status: Incomplete = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-updates in Ubuntu. https://bugs.launchpad.net/bugs/1075974 Title: nvidia driver install fails, etc, etc Status in “nvidia-graphics-drivers-updates” package in Ubuntu: Invalid Bug description: I used the the software sources to install the nvidia drivers (updates version), and it failed. I have noticed several things that are buggy-ish. I'll just list them off, leave it to you to find the bug. BTW, this is a fresh 64bit install, and I am willing to do a clean install to re-test if that helps. - X seems to start, along with network-manager. Unity does not. - The software sources installer reported success, even though I could tell the install failed by checking `dkms status` - headers package was missing, and that was the issue according to `dkms autoinstall` - 'linux-headers' is a virtual package and an unenforced dependency for dkms I feel like each of those things could be regarded as a bug. I leave that to someone else. Ultimately, the driver failed to install. FWIW, I already fixed the issue by installing linux-headers-generic, and running `dkms autoinstall`, and that was the state when I file this report. If it helps, I am happy to reinstall and re-test, or just remove the drivers/headers and retest. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: nvidia-current-updates 304.51-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7 Uname: Linux 3.5.0-18-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012 GCC version: gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) .tmp.unity.support.test.0: ApportVersion: 2.6.1-0ubuntu6 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz Date: Wed Nov 7 09:03:00 2012 DistUpgraded: Fresh install DistroCodename: quantal DistroVariant: ubuntu DkmsStatus: nvidia-current-updates, 304.51, 3.5.0-18-generic, x86_64: installed GraphicsCard: NVIDIA Corporation G73 [GeForce 7600 GS] [10de:0392] (rev a1) (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Device [1682:222c] InstallationDate: Installed on 2012-11-07 (0 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: Gigabyte Technology Co., Ltd. G31M-ES2L MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=062d2696-bc77-4194-878c-7dac2b2dbab8 ro quiet splash SourcePackage: nvidia-graphics-drivers-updates UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/09/2010 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FI dmi.board.name: G31M-ES2L dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFI:bd08/09/2010:svnGigabyteTechnologyCo.,Ltd.:pnG31M-ES2L:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnG31M-ES2L:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: G31M-ES2L dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz 1:0.9.8.4+bzr3407-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.39-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.99.99~git20120913.8637f772-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.2-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-updates/+bug/1075974/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1075974] Re: nvidia driver install fails, etc, etc
** Changed in: nvidia-graphics-drivers-updates (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-updates in Ubuntu. https://bugs.launchpad.net/bugs/1075974 Title: nvidia driver install fails, etc, etc Status in “nvidia-graphics-drivers-updates” package in Ubuntu: Invalid Bug description: I used the the software sources to install the nvidia drivers (updates version), and it failed. I have noticed several things that are buggy-ish. I'll just list them off, leave it to you to find the bug. BTW, this is a fresh 64bit install, and I am willing to do a clean install to re-test if that helps. - X seems to start, along with network-manager. Unity does not. - The software sources installer reported success, even though I could tell the install failed by checking `dkms status` - headers package was missing, and that was the issue according to `dkms autoinstall` - 'linux-headers' is a virtual package and an unenforced dependency for dkms I feel like each of those things could be regarded as a bug. I leave that to someone else. Ultimately, the driver failed to install. FWIW, I already fixed the issue by installing linux-headers-generic, and running `dkms autoinstall`, and that was the state when I file this report. If it helps, I am happy to reinstall and re-test, or just remove the drivers/headers and retest. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: nvidia-current-updates 304.51-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-18.29-generic 3.5.7 Uname: Linux 3.5.0-18-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012 GCC version: gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) .tmp.unity.support.test.0: ApportVersion: 2.6.1-0ubuntu6 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz Date: Wed Nov 7 09:03:00 2012 DistUpgraded: Fresh install DistroCodename: quantal DistroVariant: ubuntu DkmsStatus: nvidia-current-updates, 304.51, 3.5.0-18-generic, x86_64: installed GraphicsCard: NVIDIA Corporation G73 [GeForce 7600 GS] [10de:0392] (rev a1) (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Device [1682:222c] InstallationDate: Installed on 2012-11-07 (0 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MachineType: Gigabyte Technology Co., Ltd. G31M-ES2L MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=062d2696-bc77-4194-878c-7dac2b2dbab8 ro quiet splash SourcePackage: nvidia-graphics-drivers-updates UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/09/2010 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FI dmi.board.name: G31M-ES2L dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFI:bd08/09/2010:svnGigabyteTechnologyCo.,Ltd.:pnG31M-ES2L:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnG31M-ES2L:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: G31M-ES2L dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz 1:0.9.8.4+bzr3407-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.39-0ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 9.0-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 9.0-0ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.13.0-0ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.99.99~git20120913.8637f772-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.20.9-0ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.2-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-updates/+bug/1075974/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 323358] Re: [Upstream] Vertical alignment of text relative to table cell doesn't work properly in frames
I removed the bug watch because I don't want it in my bug list. Here is the link for reference: http://qa.openoffice.org/issues/show_bug.cgi?id=98669 ** No longer affects: openoffice -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to openoffice.org in Ubuntu. https://bugs.launchpad.net/bugs/323358 Title: [Upstream] Vertical alignment of text relative to table cell doesn't work properly in frames Status in “openoffice.org” package in Ubuntu: Won't Fix Bug description: Binary package hint: openoffice.org This document is an Avery design template. Its for business cards. It consists of what seems to be a collection of single cell tables, one for each card on their sheet. Each cell is supposed to have its text start from the middle. The top two tables do this properly. Every other table is locked into starting the text at the top. I tried several options, and buttons, but nothing could make it work. This is present in both intrepid and jaunty alpha (ie openoffice2.4 and openoffice3.0) I know that this bug should be filed upstream, but I don't know how to do that with openoffice. I will have to figure that out. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openoffice.org/+bug/323358/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 323358] Re: [Upstream] Vertical alignment of text relative to table cell doesn't work properly in frames
Daniel Hollocher, as Ubuntu no longer supports OpenOffice.org, would this be an issue for you in LibreOffice? If so, would the document you attached been something you downloaded from an original source (please provide link if so), or something you created yourself from scratch? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to openoffice.org in Ubuntu. https://bugs.launchpad.net/bugs/323358 Title: [Upstream] Vertical alignment of text relative to table cell doesn't work properly in frames Status in “openoffice.org” package in Ubuntu: Won't Fix Bug description: Binary package hint: openoffice.org This document is an Avery design template. Its for business cards. It consists of what seems to be a collection of single cell tables, one for each card on their sheet. Each cell is supposed to have its text start from the middle. The top two tables do this properly. Every other table is locked into starting the text at the top. I tried several options, and buttons, but nothing could make it work. This is present in both intrepid and jaunty alpha (ie openoffice2.4 and openoffice3.0) I know that this bug should be filed upstream, but I don't know how to do that with openoffice. I will have to figure that out. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openoffice.org/+bug/323358/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1038479] Re: [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a while
I have the same situation on Lenovo G460. I've opened a thread on ubuntu forum: ubuntuforums.org/showthread.php?t=2245350p=13127322#post13127322 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1038479 Title: [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a while Status in “alsa-driver” package in Ubuntu: Confirmed Bug description: Restart will fix the issue, but sound always quits from internal speaker. Headphones work always. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: alsa-base 1.0.25+dfsg-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24 Uname: Linux 3.2.0-29-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bernie 1838 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 44' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:14f15069,1179fc50,00100302 HDA:80862805,1179fc50,0010' Controls : 24 Simple ctrls : 11 Date: Sat Aug 18 11:18:34 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) PackageArchitecture: all ProcEnviron: LANGUAGE=en_US:en PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_Card: Built-in Audio - HDA Intel PCH Symptom_Jack: Speaker, Internal Symptom_Type: Sound works for a while, then breaks Title: [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a while UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/13/2011 dmi.bios.vendor: INSYDE dmi.bios.version: 2.20 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: Base Board Product Name dmi.board.vendor: Intel Corp. dmi.board.version: Base Board Version dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: OEM Chassis Manufacturer dmi.chassis.version: OEM Chassis Version dmi.modalias: dmi:bvnINSYDE:bvr2.20:bd07/13/2011:svnTOSHIBA:pnSatelliteL755:pvrPSK1WU-05N004:rvnIntelCorp.:rnBaseBoardProductName:rvrBaseBoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion: dmi.product.name: Satellite L755 dmi.product.version: PSK1WU-05N004 dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1038479/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1291168] Re: [965gm mesa] Google Chrome Stable GPU hang
Same issue here with Lenovo R61. It happens on youtube sometimes too, turn the display off included a second display. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1291168 Title: [965gm mesa] Google Chrome Stable GPU hang Status in “xserver-xorg-video-intel” package in Ubuntu: Confirmed Bug description: this is the 2nd time i opened google chrome stable on my pc. i just opened google store and was browsing some apps. i dont know what happened it just turned the display off. i couldn't do anything. ProblemType: Crash DistroRelease: Ubuntu 14.04 Package: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 ProcVersionSignature: Ubuntu 3.13.0-16.36-generic 3.13.5 Uname: Linux 3.13.0-16-generic i686 .tmp.unity.support.test.0: ApportVersion: 2.13.3-0ubuntu1 Architecture: i386 Chipset: i965gm CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Wed Mar 12 08:54:33 2014 DistUpgraded: 2014-03-08 15:26:51,012 DEBUG enabling apt cron job DistroCodename: trusty DistroVariant: ubuntu DuplicateSignature: [i965gm] GPU lockup IPEHR: 0x60020100 Ubuntu 14.04 ExecutablePath: /usr/share/apport/apport-gpu-error-intel.py ExtraDebuggingInterest: No GpuHangFrequency: This is the first time GraphicsCard: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Dell Inspiron 1420 [1028:01f3] Subsystem: Dell Dell Inspiron 1420 [1028:01f3] InstallationDate: Installed on 2013-11-04 (127 days ago) InstallationMedia: Edubuntu 10.04 Lucid Lynx - Release i386 (20100429.1) InterpreterPath: /usr/bin/python3.4 MachineType: Dell Inc. Inspiron 1420 ProcCmdline: /usr/bin/python3 /usr/share/apport/apport-gpu-error-intel.py ProcEnviron: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-16-generic root=UUID=93cf8f15-6f93-4a71-bf40-dc15c4ba1c48 ro quiet splash vt.handoff=7 RelatedPackageVersions: xserver-xorg 1:7.7+1ubuntu8 libdrm2 2.4.52-1 xserver-xorg-video-intel 2:2.99.910-0ubuntu1 SourcePackage: xserver-xorg-video-intel Title: [i965gm] GPU lockup IPEHR: 0x60020100 UpgradeStatus: Upgraded to trusty on 2014-03-08 (3 days ago) UserGroups: dmi.bios.date: 11/08/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A04 dmi.board.name: 0DT492 dmi.board.vendor: Dell Inc. dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA04:bd11/08/2007:svnDellInc.:pnInspiron1420:pvr:rvnDellInc.:rn0DT492:rvr:cvnDellInc.:ct8:cvr: dmi.product.name: Inspiron 1420 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.11+14.04.20140305-0ubuntu1 version.libdrm2: libdrm2 2.4.52-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.0~rc3-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.0~rc3-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.15.0-1ubuntu6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.910-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.10-1ubuntu2 xserver.bootTime: Wed Mar 12 08:56:15 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 12631 vendor SEC xserver.version: 2:1.15.0-1ubuntu6 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1291168/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1038479] Re: [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a while
Doing this, the sound come back again, even for a while: sudo hda-verb /dev/snd/hwC0D1 0x1f SET_POWER_STATE 0 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to alsa-driver in Ubuntu. https://bugs.launchpad.net/bugs/1038479 Title: [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a while Status in “alsa-driver” package in Ubuntu: Confirmed Bug description: Restart will fix the issue, but sound always quits from internal speaker. Headphones work always. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: alsa-base 1.0.25+dfsg-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24 Uname: Linux 3.2.0-29-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bernie 1838 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc060 irq 44' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:14f15069,1179fc50,00100302 HDA:80862805,1179fc50,0010' Controls : 24 Simple ctrls : 11 Date: Sat Aug 18 11:18:34 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) PackageArchitecture: all ProcEnviron: LANGUAGE=en_US:en PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: alsa-driver Symptom: audio Symptom_Card: Built-in Audio - HDA Intel PCH Symptom_Jack: Speaker, Internal Symptom_Type: Sound works for a while, then breaks Title: [Satellite L755, Conexant CX20585, Speaker, Internal] fails after a while UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/13/2011 dmi.bios.vendor: INSYDE dmi.bios.version: 2.20 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: Base Board Product Name dmi.board.vendor: Intel Corp. dmi.board.version: Base Board Version dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: OEM Chassis Manufacturer dmi.chassis.version: OEM Chassis Version dmi.modalias: dmi:bvnINSYDE:bvr2.20:bd07/13/2011:svnTOSHIBA:pnSatelliteL755:pvrPSK1WU-05N004:rvnIntelCorp.:rnBaseBoardProductName:rvrBaseBoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion: dmi.product.name: Satellite L755 dmi.product.version: PSK1WU-05N004 dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1038479/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 929128] Re: deja-dup backup window is white on lightgrey, white text on white background in details
** Changed in: gtk Status: New = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to deja-dup in Ubuntu. https://bugs.launchpad.net/bugs/929128 Title: deja-dup backup window is white on lightgrey, white text on white background in details Status in Déjà Dup Backup Tool: Fix Released Status in GTK+ GUI Toolkit: Expired Status in “deja-dup” package in Ubuntu: Fix Released Status in “ubuntu-themes” package in Ubuntu: Confirmed Status in “deja-dup” package in Debian: Fix Released Status in “deja-dup” package in Fedora: Unknown Bug description: Deja-dup Backup now is white on light grey. The details widget draws white text on white background. Screenshot is attached. gtk3-engines-unico: Installed: 1.0.1-0ubuntu2 Candidate: 1.0.1-0ubuntu2 ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: light-themes 0.1.8.28.1 ProcVersionSignature: Ubuntu 3.2.0-14.23-generic-pae 3.2.3 Uname: Linux 3.2.0-14-generic-pae i686 ApportVersion: 1.91-0ubuntu1 Architecture: i386 Date: Wed Feb 8 23:27:53 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha i386 (20120119) PackageArchitecture: all SourcePackage: light-themes UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/deja-dup/+bug/929128/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 420411] [NEW] vpn connection handshake times out too soon
You have been subscribed to a public bug: Binary package hint: network-manager-openvpn NetworkManager only waits 40 seconds for the VPN to come up. This is too short when using a slow connection as for instance a 64kbps GPRS connection. Calling openvpn manually also timeouts sometimes with the default timeout (60s?), but I am able to override it using the connect-timeout option in the configuration file and solve the problem. ProblemType: Bug Architecture: i386 Date: Fri Aug 28 10:55:21 2009 DistroRelease: Ubuntu 9.10 Package: network-manager-openvpn 0.7.1-0ubuntu2 ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-7.27-generic SourcePackage: network-manager-openvpn Uname: Linux 2.6.31-7-generic i686 ** Affects: network-manager (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: apport-bug i386 -- vpn connection handshake times out too soon https://bugs.launchpad.net/bugs/420411 You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp