date:20141213

raggar, thank you for reporting this and helping make Ubuntu better. Please 
execute the following command, as it will automatically gather debugging 
information, in a terminal:
apport-collect 1401935

** Package changed: xinput (Ubuntu) = linux (Ubuntu)

** Changed in: linux (Ubuntu)
   Importance: Undecided = Low

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xinput in Ubuntu.
https://bugs.launchpad.net/bugs/1401935

Title:
  Touchpad stops working after suspend

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  On a acer v3 371 the touchpad stops working after suspend. I can get the 
touchpad back to work by removing and then enable the i2c_hid module. 
   I type:
  sudo modprobe -r i2c_hid
  sudo modprobe i2c_hid

  From /proc/bus/input/devices:
  I: Bus=0018 Vendor=06cb Product=2991 Version=0100
  N: Name=SYN1B7F:01 06CB:2991 UNKNOWN
  P: Phys=
  S: 
Sysfs=/devices/pci:00/INT33C3:00/i2c-7/i2c-SYN1B7F:01/0018:06CB:2991.0002/input/input15
  U: Uniq=
  H: Handlers=mouse0 event13 
  B: PROP=1
  B: EV=b
  B: KEY=6420 1 0 0 0 0
  B: ABS=2608003

  
  Hope this helps a bit! :)

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: xinput 1.6.1-1
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Uname: Linux 3.16.0-28-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Fri Dec 12 16:13:35 2014
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroVariant: ubuntu
  EcryptfsInUse: Yes
  GraphicsCard:
   Intel Corporation Device [8086:0a2e] (rev 09) (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0918]
  InstallationDate: Installed on 2014-12-08 (3 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire V3-371
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic.efi.signed 
root=UUID=c404c12a-11b8-47c7-a6bc-24e7a572025b ro i8042.nomux=1 i8042.reset 
quiet splash vt.handoff=7
  SourcePackage: xinput
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 09/05/2014
  dmi.bios.vendor: Insyde Corp.
  dmi.bios.version: V1.12
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: Aspire V3-371
  dmi.board.vendor: Acer
  dmi.board.version: V1.12
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.12
  dmi.modalias: 
dmi:bvnInsydeCorp.:bvrV1.12:bd09/05/2014:svnAcer:pnAspireV3-371:pvrV1.12:rvnAcer:rnAspireV3-371:rvrV1.12:cvnAcer:ct10:cvrV1.12:
  dmi.product.name: Aspire V3-371
  dmi.product.version: V1.12
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Fri Dec 12 16:11:42 2014
  xserver.configfile: default
  xserver.errors: SYN1B7F:01 06CB:2991 UNKNOWN: Read error 19
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id4397 
   vendor AUO
  xserver.version: 2:1.16.0-1ubuntu1.2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1401935/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401884] Re: pad is unfunctionnal sur fujitsu lifebook serie A 544

Alain BOURDEAU, this bug report is being closed due to your last comment
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401884/comments/2
regarding this being fixed with an update. For future reference you can
manage the status of your own bugs by clicking on the current status in
the yellow line and then choosing a new status in the revealed drop down
box. You can learn more about bug statuses at
https://wiki.ubuntu.com/Bugs/Status. Thank you again for taking the time
to report this bug and helping to make Ubuntu better. Please submit any
future bugs you may find.

** Changed in: xorg (Ubuntu)
   Status: New = Invalid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401884

Title:
  pad is unfunctionnal sur fujitsu lifebook serie A 544

Status in xorg package in Ubuntu:
  Invalid

Bug description:
  Bonjour,Alain Bourdeau

  Sur cet ordinateur, le pad ne fonctionne pas malgrès toutes les
  tentatives en suvant les listes d'informations.

  Que faire ?

  Merci

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-43.72-generic 3.13.11.11
  Uname: Linux 3.13.0-43-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Fri Dec 12 14:18:37 2014
  DistUpgraded: 2014-09-17 13:25:56,451 DEBUG enabling apt cron job
  DistroCodename: trusty
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes, including running git bisection searches
  GraphicsCard:
   Intel Corporation 4th Gen Core Processor Integrated Graphics Controller 
[8086:0416] (rev 06) (prog-if 00 [VGA controller])
 Subsystem: Fujitsu Limited. Device [10cf:17a9]
  InstallationDate: Installed on 2012-06-10 (915 days ago)
  InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 
20120425-15:28
  MachineType: FUJITSU LIFEBOOK A544
  ProcEnviron:
   LANGUAGE=fr_FR
   PATH=(custom, no user)
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic 
root=UUID=f3967c6f-eef4-4562-b7f7-3efed53f1833 ro quiet splash i8042.nomux 
vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: Upgraded to trusty on 2014-09-17 (86 days ago)
  dmi.bios.date: 05/09/2014
  dmi.bios.vendor: FUJITSU // Phoenix Technologies Ltd.
  dmi.bios.version: Version 1.17
  dmi.board.name: FJNBB35
  dmi.board.vendor: FUJITSU
  dmi.chassis.type: 10
  dmi.chassis.vendor: FUJITSU
  dmi.modalias: 
dmi:bvnFUJITSU//PhoenixTechnologiesLtd.:bvrVersion1.17:bd05/09/2014:svnFUJITSU:pnLIFEBOOKA544:pvr:rvnFUJITSU:rnFJNBB35:rvr:cvnFUJITSU:ct10:cvr:
  dmi.product.name: LIFEBOOK A544
  dmi.sys.vendor: FUJITSU
  version.compiz: compiz 1:0.9.11.3+14.04.20141104-0ubuntu1
  version.ia32-libs: ia32-libs 20090808ubuntu36
  version.libdrm2: libdrm2 2.4.52-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.2
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.5
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.3
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Fri Dec 12 14:11:30 2014
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   13890 
   vendor SEC
  xserver.version: 2:1.15.1-0ubuntu2.5

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401884/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1398444] Re: Missing dependency on gir1.2-gtk-3.0

** Description changed:

  When trying to start system-config-printer from the command-line, I get
  an error
  
  Traceback (most recent call last):
-   File /usr/share/system-config-printer/system-config-printer.py, line 32, 
in module
- from gi.repository import Gdk
+   File /usr/share/system-config-printer/system-config-printer.py, line 32, 
in module
+ from gi.repository import Gdk
  ImportError: cannot import name Gdk
  
  After installing gir1.2-gtk-3.0 the error disappears.
+ 
+ [Impact]
+ 
+ The gir1.2-gtk-3.0 can be uninstalled or system-config-printer can be
+ installed on a system with no gir1.2-gtk-3.0, leading to a non-working
+ system-config-printer.
+ 
+ [Test Case]
+ 
+ Try to uninstall gir1.2-gtk-3.0 on a Trusty system with system-config-
+ printer installed. It will work or if not, the dependencies shown will
+ not include system-config-printer-gnome.
+ 
+ With the proposed package system-config-printer-gnome depends on
+ gir1.2-gtk-3.0.
+ 
+ [Regression Potential]
+ 
+ No regression potential at all as there is no code change.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to system-config-printer in Ubuntu.
https://bugs.launchpad.net/bugs/1398444

Title:
  Missing dependency on gir1.2-gtk-3.0

Status in system-config-printer package in Ubuntu:
  Fix Released
Status in system-config-printer source package in Trusty:
  Triaged

Bug description:
  When trying to start system-config-printer from the command-line, I
  get an error

  Traceback (most recent call last):
    File /usr/share/system-config-printer/system-config-printer.py, line 32, 
in module
  from gi.repository import Gdk
  ImportError: cannot import name Gdk

  After installing gir1.2-gtk-3.0 the error disappears.

  [Impact]

  The gir1.2-gtk-3.0 can be uninstalled or system-config-printer can be
  installed on a system with no gir1.2-gtk-3.0, leading to a non-working
  system-config-printer.

  [Test Case]

  Try to uninstall gir1.2-gtk-3.0 on a Trusty system with system-config-
  printer installed. It will work or if not, the dependencies shown will
  not include system-config-printer-gnome.

  With the proposed package system-config-printer-gnome depends on
  gir1.2-gtk-3.0.

  [Regression Potential]

  No regression potential at all as there is no code change.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1398444/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401863] Re: nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 kernel module failed to build

** Summary changed:

- installing a new driver:  nvidia-331 331.113
+ nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 kernel module failed to build

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1401863

Title:
  nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 kernel module failed to
  build

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  New

Bug description:
  driver problem??

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-331 331.113-0ubuntu0.0.4
  ProcVersionSignature: Ubuntu 3.13.0-31.55-generic 3.13.11.4
  Uname: Linux 3.13.0-31-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  DKMSKernelVersion: 3.13.0-43-generic
  Date: Fri Dec 12 07:48:22 2014
  InstallationDate: Installed on 2014-07-08 (157 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  PackageVersion: 331.113-0ubuntu0.0.4
  SourcePackage: nvidia-graphics-drivers-331
  Title: nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 kernel module failed to 
build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1401863/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401839] Re: Nvidia 820M operating in a high temperature

Luiz Cantoni, thank you for reporting this and helping make Ubuntu better. As 
per 
http://www.dell.com/support/home/us/en/19/product-support/product/inspiron-14-3442-laptop/drivers
 an update to your BIOS is available (A05). If you update to this following 
https://help.ubuntu.com/community/BIOSUpdate does it change anything?  If it 
doesn't, could you please both specify what happened, and provide the output of 
the following terminal command:
sudo dmidecode -s bios-version  sudo dmidecode -s bios-release-date

For more on BIOS updates and linux, please see
https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette
.

Please note your current BIOS is already in the Bug Description, so
posting this on the old BIOS would not be helpful. As well, you don't
have to create a new bug report.

Once the BIOS is updated, then please mark this report Status Confirmed.

Thank you for your understanding.

** Tags added: bios-outdated-a05

** Changed in: xorg (Ubuntu)
   Importance: Undecided = Low

** Changed in: xorg (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401839

Title:
  Nvidia 820M operating in a high temperature

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Laptop: DELL Inspiron 3000 Series I14-3442-A40 (Core i5)

  GPU: Nvidia 820M (2GB 64 bits)

  Nvidia Driver: 331.38

  Description:  Ubuntu 14.04.1 LTS
  Release:  14.04

  Problem: My GPU temperature is reaching 90-93 degrees Celsius (°C) and
  the fan is always operating in the maximum rpm

  If I change to the Intel integrated graphics the problem doesn't
  happen and the processor operates in 62 degrees Celsius (°C)

  After noting this behavior my Ubuntu was updated. The NVIDIA Driver
  now is 331.113. I'm playing now and my temperature is 88 degrees
  Celsius (°C).

  
  What you expected to happen:

  A temperature between 75 and 80 degrees Celsius (°C)

  What happened instead

  A temperature between 88 and 93 degrees Celsius (°C)

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8
  Uname: Linux 3.13.0-39-generic x86_64
  NonfreeKernelModules: nvidia
  .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: 
'/proc/driver/nvidia/gpus/0'
  .proc.driver.nvidia.registry: Binary: 
  .proc.driver.nvidia.version:
   NVRM version: NVIDIA UNIX x86_64 Kernel Module  331.113  Mon Dec  1 21:08:13 
PST 2014
   GCC version:  gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1)
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Fri Dec 12 08:18:55 2014
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 0b) (prog-if 00 [VGA controller])
 Subsystem: Dell Device [1028:0652]
 Subsystem: Dell Device [1028:0652]
  InstallationDate: Installed on 2014-06-12 (183 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  MachineType: Dell Inc. Inspiron 3442
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-39-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/05/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A04
  dmi.board.name: 0C1F3F
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A04
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: Not Specified
  dmi.modalias: 
dmi:bvnDellInc.:bvrA04:bd08/05/2014:svnDellInc.:pnInspiron3442:pvrNotSpecified:rvnDellInc.:rn0C1F3F:rvrA04:cvnDellInc.:ct8:cvrNotSpecified:
  dmi.product.name: Inspiron 3442
  dmi.product.version: Not Specified
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.52-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.2
  version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.5
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.3
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2

[Desktop-packages] [Bug 1401743] Re: HP Z210 workstation with nvidia Quadro 600 card thinks 32 inch sharp TV/monitor is 37 inch

John Ellis, thank you for reporting this and helping make Ubuntu better. As per 
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5053191swLangOid=8swEnvOid=4060
 an update to your BIOS is available (1.47). If you update to this following 
https://help.ubuntu.com/community/BIOSUpdate does it change anything?  If it 
doesn't, could you please both specify what happened, and provide the output of 
the following terminal command:
sudo dmidecode -s bios-version  sudo dmidecode -s bios-release-date

For more on BIOS updates and linux, please see
https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette
.

Please note your current BIOS is already in the Bug Description, so
posting this on the old BIOS would not be helpful. As well, you don't
have to create a new bug report.

Once the BIOS is updated, then please mark this report Status Confirmed.

Thank you for your understanding.

** Tags added: bios-outdated-1.47

** Changed in: xorg (Ubuntu)
   Importance: Undecided = Low

** Changed in: xorg (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401743

Title:
  HP Z210 workstation with nvidia Quadro 600 card thinks 32 inch  sharp
  TV/monitor is 37 inch

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  I am dual booting with windows 8.1 and I am able to tweak the same
  misconfiguration with the nvidia console in windows by shrinking (down
  scaling) the display from 1920 X1080 to 1824 X 1026 resolution
  preserving the aspect ratio.

   Is it possible to enable the correct identification of the monitor as
  a 32 inch diagonal instead of an oversized 37 inch diagonal which
  makes my top menu bar and application side bar offscreen? I tried to
  install the nvidia (updates driver) but tweaking resulted in a
  missconfiguration forcing a lockup and reinstall.

  Since Windows also misidentifies this display it may be a
  communication error sourced from the display itself or documentation
  annomalies in an obscure monitor ...any advice or direction would be
  appreciated.

  John Ellis

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: xorg 1:7.7+7ubuntu2
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Uname: Linux 3.16.0-28-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Thu Dec 11 21:50:04 2014
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes, including running git bisection searches
  GraphicsCard:
   NVIDIA Corporation GF108GL [Quadro 600] [10de:0df8] (rev a1) (prog-if 00 
[VGA controller])
 Subsystem: Hewlett-Packard Company Device [103c:0835]
  InstallationDate: Installed on 2014-12-12 (0 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Hewlett-Packard HP Z210 Workstation
  ProcEnviron:
   LANGUAGE=en_CA:en
   PATH=(custom, no user)
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic.efi.signed 
root=UUID=6240f369-971d-4d13-b37d-b64e3abe7964 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/11/2012
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: J51 v01.41
  dmi.board.asset.tag: 2UA12307FK-XM857AV
  dmi.board.name: 1588h
  dmi.board.vendor: Hewlett-Packard
  dmi.chassis.asset.tag: 2UA12307FK-XM857AV
  dmi.chassis.type: 6
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrJ51v01.41:bd07/11/2012:svnHewlett-Packard:pnHPZ210Workstation:pvr:rvnHewlett-Packard:rn1588h:rvr:cvnHewlett-Packard:ct6:cvr:
  dmi.product.name: HP Z210 Workstation
  dmi.sys.vendor: Hewlett-Packard
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Thu Dec 11 21:20:56 2014
  xserver.configfile: default
  xserver.errors:
   Failed to load module nvidia (module does not exist, 0)
   Failed

[Desktop-packages] [Bug 645695] Re: Gedit 2.30.3 does not highlight the first spelling error found. Subsequent spelling errors are highlighted correctly.

2014-12-13 Thread Bug Watch Updater

** Changed in: gedit
   Status: New = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gedit in Ubuntu.
https://bugs.launchpad.net/bugs/645695

Title:
  Gedit 2.30.3 does not highlight the first spelling error found.
  Subsequent spelling errors are highlighted correctly.

Status in Light-Weight Text Editor for Gnome:
  Fix Released
Status in gedit package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: gedit

  Thank You for your much needed help.

  Chazbo

To manage notifications about this bug go to:
https://bugs.launchpad.net/gedit/+bug/645695/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 245206] Re: Presentation mode displays only one page and not two (in two page mode)

2014-12-13 Thread jpka

Yes, this is working, thank you. But we can be even more happy, when
Presentation also will work in predictable/intuitive manner (not ignore
user settings, like Fullscreen mode does). That will conforms to Look
And Feel.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to evince in Ubuntu.
https://bugs.launchpad.net/bugs/245206

Title:
  Presentation mode displays only one page and not two (in two page
  mode)

Status in Evince document viewer:
  Fix Released
Status in evince package in Ubuntu:
  Invalid

Bug description:
  Binary package hint: evince

  When evince displays a document in windowed-mode and 2-pages-mode,
  pressing F5 goes to presentation-mode and 1-page-mode.

  This could be the correct behaviour for presentation but presentation-
  mode is useful also for normal document. (in full-screen-mode there is
  the toolbar, that can be removed, but this seems ugly to me, so
  presentation mode is the only sane way to use all the screen for
  reading - and is also much more stylish with the black background...)

  Anyway I think this behaviour is not correct even for presentation,
  since I could view them in 2-pages-mode when windowed. If one would
  like to inhibit 2-pages-mode, it should be for document with more
  width then height, not for a particular viewing mode.

  Thanks.

To manage notifications about this bug go to:
https://bugs.launchpad.net/evince/+bug/245206/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1400232] Re: system-config-printer crash UnicodeDecodeError: 'utf-8' codec can't decode byte 0xe9 in position 1441: invalid continuation byte (only UTF-8-encoded PPD files can

Uploaded packages fixing bug 1398444, bug 1400232, and bug 1401835 to
trusty-proposed and utopic-proposed. As soon as the packages are
approved they will be available for download and testing and
instructions will get posted here. Please test the packages and give
your feedback here, otherwise they will not get available as official
update.

** Changed in: system-config-printer (Ubuntu Trusty)
   Status: Triaged = In Progress

** Changed in: system-config-printer (Ubuntu Utopic)
   Status: Triaged = In Progress

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to system-config-printer in Ubuntu.
https://bugs.launchpad.net/bugs/1400232

Title:
  system-config-printer crash UnicodeDecodeError: 'utf-8' codec can't
  decode byte 0xe9 in position 1441: invalid continuation byte (only
  UTF-8-encoded PPD files can be used)

Status in system-config-printer package in Ubuntu:
  Fix Released
Status in system-config-printer source package in Trusty:
  In Progress
Status in system-config-printer source package in Utopic:
  In Progress

Bug description:
  system-config-printer crash with the following traceback :

  sramage@japc09:~$ system-config-printer
  Traceback (most recent call last):
    File /usr/share/system-config-printer/asyncipp.py, line 191, in send_reply
  handler (self._conn, result)
    File /usr/share/system-config-printer/asyncpk1.py, line 164, in 
_ipp_reply_handler
  self._client_reply_handler (self._conn, *args)
    File /usr/share/system-config-printer/asyncconn.py, line 91, in 
reply_handler
  self._reply_handler (self, self._reply_data, *args)
    File /usr/share/system-config-printer/asyncconn.py, line 209, in 
_subst_reply_handler
  reply_handler (self, *args)
    File /usr/share/system-config-printer/ppdcache.py, line 79, in lambda
  self._got_ppd3 (c, name, r, callback),
    File /usr/share/system-config-printer/ppdcache.py, line 153, in _got_ppd3
  self.fetch_ppd (name, callback, check_uptodate=False)
    File /usr/share/system-config-printer/ppdcache.py, line 90, in fetch_ppd
  tmpf.writelines (f.readlines ())
    File /usr/lib/python3.4/codecs.py, line 313, in decode
  (result, consumed) = self._buffer_decode(data, self.errors, final)
  UnicodeDecodeError: 'utf-8' codec can't decode byte 0xe9 in position 1441: 
invalid continuation byte

  [Impact]

  It is impossible to set up or manipulate a printer with a PPD file
  which is not UTF-8-encoded and no plain ASCII. Even worse, if such a
  PPD is installed into the system's PPD repository, the corresponding
  printer(s) will not auto-setup.

  [Test Case]

  Take a PPD file which is not UTF-8-encoded, for example a PPD file for
  Windows with Windows-1252 encoding. Try to set up a que with it or to
  change an existing queue to use it by means of system-config-printer.
  system-config-printer will crash.

  With the proposed package the PPD can be used without problems.

  [Regression Potential]

  The changes are very simple and therefore the regression potential is
  low.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1400232/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401835] Re: system-config-printer does not automatically download and install printer driver packages any more

Uploaded packages fixing bug 1398444, bug 1400232, and bug 1401835 to
trusty-proposed and utopic-proposed. As soon as the packages are
approved they will be available for download and testing and
instructions will get posted here. Please test the packages and give
your feedback here, otherwise they will not get available as official
update.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to system-config-printer in Ubuntu.
https://bugs.launchpad.net/bugs/1401835

Title:
  system-config-printer does not automatically download and install
  printer driver packages any more

Status in system-config-printer package in Ubuntu:
  Fix Released
Status in system-config-printer source package in Trusty:
  In Progress
Status in system-config-printer source package in Utopic:
  In Progress

Bug description:
  The transition from Python2 to Python3, the replacement of the
  OpenPrinting web server by a new VM running Ubuntu 12.04 instead of
  10.04 (which was done bevause the old VM was completely overloaded and
  so contributed a part of the inability to auto-install drivers), and
  code restructuring in system-config-printer has broken automatic
  driver package download at several points. This is now fixed in the
  Vivid package of system-config-printer but (at least part) of the
  fixes needs to get backported to Utopic and Trusty, for which I have
  posted this bug report.

  [Impact]

  With the OpenPrinting web server change (Utopic, Trusty) and the
  transition to Python3 (Utopic) automatic driver download stopped
  working. So users of Utopic and Trusty who connect a printer only
  supported by a downloadable driver package listed at OpenPrinting
  (mostly newer Epson inkjets but also new PostScript/PCL printers from
  Ricoh and OEM, Samsung, ...) will not get the correct driver letting
  the printer not work at all or work with an inferior generic driver.

  [Test Case]

  If you do not have one of the mentioned printers, create a file named
  /usr/lib/cups/backend/testbackend containing the line

  echo 'direct usb://EPSON/EP-801A EPSON EP-801A EPSON EP-801A
  MFG:EPSON;CMD:ESCPL2,BDC,D4,D4PX,ESCPR2;MDL:EP-
  801A;CLS:PRINTER;DES:EPSON EP-801A; '

  and make iot world-readable and -executable:

  sudo chmod a+rx /usr/lib/cups/backend/testbackend

  This emulates an Epson EP-801A printer on USB, at least for CUPS'
  printer discovery facility.

  Start system-config-printer and click the Add button. In the printer
  setup wizard choose the Epson EP-801A under the detected printers.
  There will pop up Searching driver messages several times but in the
  end the manual make/model/driver selection screen appears as system-
  config-printer was not able to find a driver for this printer.

  With the proposed packages for Utopic and Trusty a driver is find via
  OpenPrinting (epson-escpr) and offered for download. Accepting this
  leads to the driver being installed (and the Debian package repository
  at Epson being locally registered for future updates by Ubuntu's
  update mechanism) and afterwards automatically being assigned to the
  new print queue. The user is only asked for setting the queue name and
  comments before the wizard completes.

  [Regression Potential]

  Regression potential is low, as the fix consists of several small,
  independent changes, and most of them are not hit if the newly added
  printer is supported by a locally available driver.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1401835/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1398444] Re: Missing dependency on gir1.2-gtk-3.0

Uploaded a package fixing bug 1398444, bug 1400232, and bug 1401835 to
trusty-proposed. As soon as the package is approved it will be available
for download and testing and instructions will get posted here. Please
test the package and give your feedback here, otherwise it will not get
available as official update.

** Changed in: system-config-printer (Ubuntu Trusty)
   Status: Triaged = In Progress

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to system-config-printer in Ubuntu.
https://bugs.launchpad.net/bugs/1398444

Title:
  Missing dependency on gir1.2-gtk-3.0

Status in system-config-printer package in Ubuntu:
  Fix Released
Status in system-config-printer source package in Trusty:
  In Progress

Bug description:
  When trying to start system-config-printer from the command-line, I
  get an error

  Traceback (most recent call last):
    File /usr/share/system-config-printer/system-config-printer.py, line 32, 
in module
  from gi.repository import Gdk
  ImportError: cannot import name Gdk

  After installing gir1.2-gtk-3.0 the error disappears.

  [Impact]

  The gir1.2-gtk-3.0 can be uninstalled or system-config-printer can be
  installed on a system with no gir1.2-gtk-3.0, leading to a non-working
  system-config-printer.

  [Test Case]

  Try to uninstall gir1.2-gtk-3.0 on a Trusty system with system-config-
  printer installed. It will work or if not, the dependencies shown will
  not include system-config-printer-gnome.

  With the proposed package system-config-printer-gnome depends on
  gir1.2-gtk-3.0.

  [Regression Potential]

  No regression potential at all as there is no code change.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/1398444/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402170] [NEW] Publishing on Picasa shows empty window

2014-12-13 Thread Daniele Besana

Public bug reported:

Version: 0.18.0-0ubuntu4.3 amd

If I try to publish a picture on Picasa, the dialog window is empty and I can 
only click on Cancel.
I can't even switch to another export option.

The debug shows this messages:

L 16024 2014-12-13 11:06:29 [DBG] ConfigurationInterfaces.vala:323: 
ConfigurationFacade: engine reports property 'LAST_USED_SERVICE' changed.
L 16024 2014-12-13 11:06:29 [DBG] PublishingPluginHost.vala:114: 
ConcretePublishingHost.start_publishing( ): invoked.
L 16024 2014-12-13 11:06:29 [DBG] PicasaPublishing.vala:403: PicasaPublisher: 
start( ) invoked.
L 16024 2014-12-13 11:06:29 [DBG] accounts.vala:147: ACTION: authentication 
requested.
L 16024 2014-12-13 11:06:29 [DBG] accounts.vala:159: ACTION: authenticating.
L 16024 2014-12-13 11:06:29 [DBG] accounts.vala:19: Signon-id: 9
L 16024 2014-12-13 11:06:29 [DBG] accounts.vala:168: Got account data
L 16024 2014-12-13 11:06:29 [DBG] signon-auth-session.c:734: Object path 
received: /com/google/code/AccountsSSO/SingleSignOn/AuthSession_12
L 16024 2014-12-13 11:07:00 [DBG] signon-auth-session.c:763: remote object 
unregistered


Thanks

** Affects: shotwell (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to shotwell in Ubuntu.
https://bugs.launchpad.net/bugs/1402170

Title:
  Publishing on Picasa shows empty window

Status in shotwell package in Ubuntu:
  New

Bug description:
  Version: 0.18.0-0ubuntu4.3 amd

  If I try to publish a picture on Picasa, the dialog window is empty and I can 
only click on Cancel.
  I can't even switch to another export option.

  The debug shows this messages:

  L 16024 2014-12-13 11:06:29 [DBG] ConfigurationInterfaces.vala:323: 
ConfigurationFacade: engine reports property 'LAST_USED_SERVICE' changed.
  L 16024 2014-12-13 11:06:29 [DBG] PublishingPluginHost.vala:114: 
ConcretePublishingHost.start_publishing( ): invoked.
  L 16024 2014-12-13 11:06:29 [DBG] PicasaPublishing.vala:403: PicasaPublisher: 
start( ) invoked.
  L 16024 2014-12-13 11:06:29 [DBG] accounts.vala:147: ACTION: authentication 
requested.
  L 16024 2014-12-13 11:06:29 [DBG] accounts.vala:159: ACTION: authenticating.
  L 16024 2014-12-13 11:06:29 [DBG] accounts.vala:19: Signon-id: 9
  L 16024 2014-12-13 11:06:29 [DBG] accounts.vala:168: Got account data
  L 16024 2014-12-13 11:06:29 [DBG] signon-auth-session.c:734: Object path 
received: /com/google/code/AccountsSSO/SingleSignOn/AuthSession_12
  L 16024 2014-12-13 11:07:00 [DBG] signon-auth-session.c:763: remote object 
unregistered

  
  Thanks

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/shotwell/+bug/1402170/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1277641] Re: German keyboard layout loses tilde dead key

2014-12-13 Thread mariano

+1

German (legacy) brings back the dead key function for now, but I agree
with umehlig. A possible removal in the future should not happen, and
shunting the dead key function to the legacy keyboard layout is not a
nice solution.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/1277641

Title:
  German keyboard layout loses tilde dead key

Status in gnome-control-center package in Ubuntu:
  Confirmed

Bug description:
  I'm used to the tilde (~) key being a dead key that can be used to
  type ñ or Ĩ. This changed with a recent update where it stopped
  connecting to the next typed character. After considerable effort I
  found Deutsch (veraltet) ie. German (deprecated).

  There used to be a way to tweak layout settings which also disappeared
  so there's no way for me to change this behavior.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: gnome-control-center 1:3.6.3-0ubuntu50
  ProcVersionSignature: Ubuntu 3.13.0-6.23-generic 3.13.0
  Uname: Linux 3.13.0-6-generic x86_64
  ApportVersion: 2.13.2-0ubuntu2
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Fri Feb  7 13:34:21 2014
  InstallationDate: Installed on 2013-07-03 (219 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  SourcePackage: gnome-control-center
  UpgradeStatus: Upgraded to trusty on 2013-11-21 (78 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1277641/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401716] Re: segfault when trying to play a video after suspend

mathew thomas, thank you for reporting this and helping make Ubuntu better. 
Please execute the following command, as it will automatically gather debugging 
information, in a terminal:
apport-collect 1401716
When reporting bugs in the future please use apport by using 'ubuntu-bug' and 
the name of the package affected. You can learn more about this functionality 
at https://wiki.ubuntu.com/ReportingBugs.

** Package changed: xserver-xorg-video-nouveau (Ubuntu) = linux
(Ubuntu)

** Changed in: linux (Ubuntu)
   Importance: Undecided = Low

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu.
https://bugs.launchpad.net/bugs/1401716

Title:
  segfault when trying to play a video after suspend

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  after returning from suspend i try to play a video  (tried varoius players) 
and i get a crash
  Dec 12 11:01:28 lap002 kernel: [124707.154880] multiqueue0:src[14358]: 
segfault at 12de ip b2c23d04 sp b20fea60 error 6 in 
libgstlibav.so[b2c0b000+37000]
  Dec 12 11:03:33 lap002 kernel: [124832.372175] nouveau E[Xorg[2300]] failed 
to idle channel 0x [Xorg[2300]]
  Dec 12 11:03:33 lap002 kernel: [124832.372380] nouveau E[ 
PFB][:01:00.0] trapped read at 0x002001e020 on channel 0x0003fb24 [unknown] 
SEMAPHORE_BG/PFIFO_READ/00 reason: PAGE_NOT_PRESENT
  Dec 12 11:03:33 lap002 kernel: [124832.372869] nouveau E[  
PGRAPH][:01:00.0] TRAP_M2MF NOTIFY
  Dec 12 11:03:33 lap002 kernel: [124832.372983] nouveau E[  
PGRAPH][:01:00.0] TRAP_M2MF 00304041 4360  06000432
  Dec 12 11:03:33 lap002 kernel: [124832.373051] nouveau E[  
PGRAPH][:01:00.0]  TRAP
  Dec 12 11:03:33 lap002 kernel: [124832.374797] nouveau E[  
PGRAPH][:01:00.0] ch 3 [0x003fb24000 Xorg[2300]] subc 0 class 0x5039 mthd 
0x023c data 0x
  Dec 12 11:03:33 lap002 kernel: [124832.376610] nouveau E[ 
PFB][:01:00.0] trapped write at 0x002001e010 on channel 0x0003fb24 
[Xorg[2300]] PGRAPH/DISPATCH/M2M_NOTIFY reason: PAGE_NOT_PRESENT
  Dec 12 11:03:33 lap002 kernel: [124832.378539] nouveau E[  
PGRAPH][:01:00.0] TRAP_M2MF IN
  Dec 12 11:03:33 lap002 kernel: [124832.380381] nouveau E[  
PGRAPH][:01:00.0] TRAP_M2MF 00320151 0100  0400
  Dec 12 11:03:33 lap002 kernel: [124832.382185] nouveau E[  
PGRAPH][:01:00.0]  TRAP
  Dec 12 11:03:33 lap002 kernel: [124832.383966] nouveau E[  
PGRAPH][:01:00.0] ch 3 [0x003fb24000 Xorg[2300]] subc 0 class 0x5039 mthd 
0x0328 data 0x
  Dec 12 11:03:33 lap002 kernel: [124832.385817] nouveau E[ 
PFB][:01:00.0] trapped write at 0x002001e020 on channel 0x0003fb24 
[unknown] PFIFO/PFIFO_READ/SEMAPHORE reason: PAGE_NOT_PRESENT
  Dec 12 11:03:33 lap002 kernel: [124832.387815] nouveau E[ 
PFB][:01:00.0] trapped read at 0x002001e024 on channel 0x0003fb24 [unknown] 
PFIFO/PFIFO_READ/SEMAPHORE reason: PAGE_NOT_PRESENT
  Dec 12 11:03:33 lap002 kernel: [124832.389838] nouveau E[  
PGRAPH][:01:00.0] TRAP_M2MF NOTIFY
  Dec 12 11:03:33 lap002 kernel: [124832.391725] nouveau E[  
PGRAPH][:01:00.0] TRAP_M2MF 00304041 4360  06000432
  Dec 12 11:03:33 lap002 kernel: [124832.393613] nouveau E[  
PGRAPH][:01:00.0]  TRAP
  Dec 12 11:03:33 lap002 kernel: [124832.395447] nouveau E[  
PGRAPH][:01:00.0] ch 3 [0x003fb24000 Xorg[2300]] subc 0 class 0x5039 mthd 
0x023c data 0x
  Dec 12 11:03:33 lap002 kernel: [124832.397335] nouveau E[ 
PFB][:01:00.0] trapped write at 0x002001e010 on channel 0x0003fb24 
[Xorg[2300]] PGRAPH/DISPATCH/M2M_NOTIFY reason: PAGE_NOT_PRESENT
  Dec 12 11:03:33 lap002 kernel: [124832.399322] nouveau E[  
PGRAPH][:01:00.0] TRAP_M2MF IN
  Dec 12 11:03:33 lap002 kernel: [124832.401242] nouveau E[  
PGRAPH][:01:00.0] TRAP_M2MF 00320151 05c0  0400
  Dec 12 11:03:33 lap002 kernel: [124832.403130] nouveau E[  
PGRAPH][:01:00.0]  TRAP
  Dec 12 11:03:33 lap002 kernel: [124832.405016] nouveau E[  
PGRAPH][:01:00.0] ch 3 [0x003fb24000 Xorg[2300]] subc 0 class 0x5039 mthd 
0x0328 data 0x
  Dec 12 11:03:33 lap002 kernel: [124832.406941] nouveau E[ 
PFB][:01:00.0] trapped write at 0x002001e020 on channel 0x0003fb24 
[unknown] PFIFO/PFIFO_READ/SEMAPHORE reason: PAGE_NOT_PRESENT
  Dec 12 11:03:33 lap002 kernel: [124832.409047] nouveau E[ 
PFB][:01:00.0] trapped read at 0x002001e024 on channel 0x0003fb24 [unknown] 
PFIFO/PFIFO_READ/SEMAPHORE reason: PAGE_NOT_PRESENT
  Dec 12 11:03:33 lap002 kernel: [124832.411284] nouveau E[  
PGRAPH][:01:00.0] TRAP_M2MF NOTIFY
  Dec 12 11:03:33 lap002 kernel: [124832.413285] nouveau E[  
PGRAPH][:01:00.0] TRAP_M2MF 00304041 4360  06000432
  Dec 12 11:03:33 lap002 kernel: [124832.415238] nouveau E[  
PGRAPH][:01:00.0]  TRAP
  Dec 12 11:03:33 lap002 kernel: [124832.417180]

[Desktop-packages] [Bug 241781] Re: hp photosmart 7450 communication problems.

Can someone of the HPLIP developers at HP check what is going on here?
Thanks.

** Also affects: hplip
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to hplip in Ubuntu.
https://bugs.launchpad.net/bugs/241781

Title:
  hp photosmart 7450 communication problems.

Status in HP Linux Imaging and Printing:
  New
Status in hplip package in Ubuntu:
  Incomplete

Bug description:
  My HP photosmart 7450 printer has been showing some communication problems 
since using Hardy.  Prior to this, I've been running Debian stable on exactly 
the same hardware without any printer problems.  The symptoms are:
  printer is detected as photosmart 7400  appears to install correctly.  I can 
sometimes initially print one or two pages, then it locks up completely, I get 
a pop-up notice on the top panel about printer supplies low (although it 
isn't).  At this point, the printer firmware appears to have hung - it doesn't 
respond to front-panel button presses  the only way to get it to respond is to 
pull the power supply for a few seconds.  On reconnecting, it sometimes prints, 
sometimes doesn't.  
  I've tried uninstalling the hplip package and installing the latest version 
(2.8.5) from the hp website.  It didn't make any difference, the symptoms are 
unchanged.  

  It looks like there's another user with the same problem:
  http://ubuntuforums.org/showthread.php?t=809469highlight=photosmart+7450 

  Following the advice from the debugging printer problems page:
  mike@badger:~$ lsmod |grep usb
  usb_storage73664  0 
  libusual   19108  1 usb_storage
  usblp  15872  0 
  usbhid 31872  0 
  hid38784  1 usbhid
  usbcore   146028  8 
usb_storage,libusual,usblp,usbhid,ehci_hcd,uhci_hcd
  scsi_mod  151436  5 usb_storage,sg,sr_mod,sd_mod,libata

  mike@badger:~$ tail -f /var/log/messages
  Jun 20 20:24:37 badger kernel: [  476.217222] scsi 2:0:0:0: [sdb] Sense not 
available.
  Jun 20 20:24:37 badger kernel: [  476.217230] scsi 2:0:0:0: [sdb] Write 
Protect is off
  Jun 20 20:24:37 badger kernel: [  476.324885] usb 4-1: new full speed USB 
device using uhci_hcd and address 3
  Jun 20 20:24:38 badger kernel: [  476.888758] usb 4-1: new full speed USB 
device using uhci_hcd and address 4
  Jun 20 20:24:39 badger kernel: [  477.456648] usb 4-1: new full speed USB 
device using uhci_hcd and address 5
  Jun 20 20:24:39 badger kernel: [  477.976533] usb 4-1: new full speed USB 
device using uhci_hcd and address 6
  Jun 20 20:37:20 badger -- MARK --
  Jun 20 20:57:20 badger -- MARK --
  Jun 20 21:17:20 badger -- MARK --
  Jun 20 21:37:20 badger -- MARK --
  Jun 20 21:41:19 badger kernel: [ 5077.147105] usb 4-1: new full speed USB 
device using uhci_hcd and address 7
  Jun 20 21:41:19 badger kernel: [ 5077.341241] usb 4-1: configuration #1 
chosen from 1 choice
  Jun 20 21:41:19 badger kernel: [ 5077.349158] usblp0: USB Bidirectional 
printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB802
  Jun 20 21:41:19 badger kernel: [ 5077.363071] scsi3 : SCSI emulation for USB 
Mass Storage devices
  Jun 20 21:41:24 badger kernel: [ 5082.381468] scsi 3:0:0:0: Direct-Access 
HP   Photosmart 7400  1.00 PQ: 0 ANSI: 2
  Jun 20 21:41:24 badger kernel: [ 5082.398537] sd 3:0:0:0: [sdb] Attached SCSI 
removable disk
  Jun 20 21:41:24 badger kernel: [ 5082.398592] sd 3:0:0:0: Attached scsi 
generic sg3 type 0
  Jun 20 21:57:20 badger -- MARK --
  Jun 20 22:17:20 badger -- MARK --
  Jun 20 22:37:20 badger -- MARK --

  mike@badger:~$ lpinfo -v
  network socket
  network beh
  direct hpfax
  direct 
hal:///org/freedesktop/Hal/devices/usb_device_3f0_b802_CN4B82V0WBUJ_if0_printer_CN4B82V0WBUJ
  direct usb://HP/Photosmart%207400%20series?serial=CN4B82V0WBUJ
  direct hp:/usb/Photosmart_7400_series?serial=CN4B82V0WBUJ
  network http
  network ipp
  network lpd
  direct parallel:/dev/lp0
  file cups-pdf:/
  direct scsi
  network smb
  mike@badger:~$

To manage notifications about this bug go to:
https://bugs.launchpad.net/hplip/+bug/241781/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401635] Re: NVIDIA driver makes internet very slow

Adrians Netlis, thank you for reporting this and helping make Ubuntu better. 
Please execute the following command, as it will automatically gather debugging 
information, in a terminal:
apport-collect 1401635
When reporting bugs in the future please use apport by using 'ubuntu-bug' and 
the name of the package affected. You can learn more about this functionality 
at https://wiki.ubuntu.com/ReportingBugs.

** Package changed: nvidia-graphics-drivers-331-updates (Ubuntu) = xorg
(Ubuntu)

** Changed in: xorg (Ubuntu)
   Importance: Undecided = Low

** Changed in: xorg (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401635

Title:
  NVIDIA driver makes internet very slow

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Here is information about bug:
  I am not a good computer spec, so I could not find reason of it, but, when I 
installed NVIDIA bin-331.89 driver from additional drivers, it appeared a bug 
so my internet became very slow. I use Realtek RTL8111/RTL8168... ethernet 
adapter. I have r8169 kernel driver in use(I am not allowed to modify internet 
stuff in this computer, cause this is actually my parent's PC). Wehn I 
installed NVIDIA driver, internet appeared to work very, very slow. After 
getting rid of it, it became nice again. Could you, please, look trought this 
and find something to fix this. Maybe you could gimme full tutorial on how to 
do it if I have:
  01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] 
(rev a1)
  03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401635/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401635] Re: NVIDIA driver makes internet very slow

Please ensure you have xdiagnose installed, and that you click the Yes
button for attaching additional debugging information.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401635

Title:
  NVIDIA driver makes internet very slow

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Here is information about bug:
  I am not a good computer spec, so I could not find reason of it, but, when I 
installed NVIDIA bin-331.89 driver from additional drivers, it appeared a bug 
so my internet became very slow. I use Realtek RTL8111/RTL8168... ethernet 
adapter. I have r8169 kernel driver in use(I am not allowed to modify internet 
stuff in this computer, cause this is actually my parent's PC). Wehn I 
installed NVIDIA driver, internet appeared to work very, very slow. After 
getting rid of it, it became nice again. Could you, please, look trought this 
and find something to fix this. Maybe you could gimme full tutorial on how to 
do it if I have:
  01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] 
(rev a1)
  03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401635/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1366381] Re: Importing ICC color profile fails: failed to get imported profile: The profile was not added in time

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: unity-control-center (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/1366381

Title:
  Importing ICC color profile fails: failed to get imported profile:
  The profile was not added in time

Status in unity-control-center package in Ubuntu:
  Confirmed

Bug description:
  Steps to reproduce:

  1) Run the command unity-control-center color in a terminal, to open the 
Color profile management dialog
  2) Click Add profile
  3) Select Other profile... from the drop down list
  4) Select the ICC color profile attached to this bug report
  5) Click Add

  Wait a couple of seconds, and the following line should appear in the
  terminal:

  (unity-control-center:20636): color-cc-panel-WARNING **: failed to
  get imported profile: The profile was not added in time

  This is the complete command line output:

  rune@pc:~$ unity-control-center color

  (unity-control-center:24164): color-cc-panel-WARNING **: failed to
  get the active profile

  (unity-control-center:24164): color-cc-panel-WARNING **: failed to
  get imported profile: The profile was not added in time

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: unity-control-center 14.04.3+14.04.20140604-0ubuntu1
  ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6
  Uname: Linux 3.13.0-35-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Sat Sep  6 20:17:30 2014
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2014-04-09 (150 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Daily amd64 (20140409)
  SourcePackage: unity-control-center
  UpgradeStatus: No upgrade log present (probably fresh install)
  usr_lib_unity-control-center:
   activity-log-manager 0.9.7-0ubuntu14
   deja-dup 30.0-0ubuntu4

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-control-center/+bug/1366381/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 241781] Re: hp photosmart 7450 communication problems.

2014-12-13 Thread dino99

An other feedback with a c4585 here running on vivid and/or utopic/precise i386:
- same issue as described
- i get around by unplug/plug the usb cord

so im thinking about how the 'usb' device is monitored:
- at the login session (gnome-shell here) the hp printer is well identified 
(icon in the systray for a few seconds then disappear)
- when a print job is sent later, the printer does not awake: need to 
unplug/plug the usb cord, then i need to reload the printing job, choose the 
printer, then the job is done. But then the printer is again deactivated and 
the next print job needs the previous workaround.

That is; so as i understand, sending a print job SHOULD also first
reinitiate the device to make it active. Is it a
udev/systemd/script/else missing/not implemented mandatory job ? (seems
not be a hplip issue per se)


** Tags added: utopic vivid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to hplip in Ubuntu.
https://bugs.launchpad.net/bugs/241781

Title:
  hp photosmart 7450 communication problems.

Status in HP Linux Imaging and Printing:
  New
Status in hplip package in Ubuntu:
  Incomplete

Bug description:
  My HP photosmart 7450 printer has been showing some communication problems 
since using Hardy.  Prior to this, I've been running Debian stable on exactly 
the same hardware without any printer problems.  The symptoms are:
  printer is detected as photosmart 7400  appears to install correctly.  I can 
sometimes initially print one or two pages, then it locks up completely, I get 
a pop-up notice on the top panel about printer supplies low (although it 
isn't).  At this point, the printer firmware appears to have hung - it doesn't 
respond to front-panel button presses  the only way to get it to respond is to 
pull the power supply for a few seconds.  On reconnecting, it sometimes prints, 
sometimes doesn't.  
  I've tried uninstalling the hplip package and installing the latest version 
(2.8.5) from the hp website.  It didn't make any difference, the symptoms are 
unchanged.  

  It looks like there's another user with the same problem:
  http://ubuntuforums.org/showthread.php?t=809469highlight=photosmart+7450 

  Following the advice from the debugging printer problems page:
  mike@badger:~$ lsmod |grep usb
  usb_storage73664  0 
  libusual   19108  1 usb_storage
  usblp  15872  0 
  usbhid 31872  0 
  hid38784  1 usbhid
  usbcore   146028  8 
usb_storage,libusual,usblp,usbhid,ehci_hcd,uhci_hcd
  scsi_mod  151436  5 usb_storage,sg,sr_mod,sd_mod,libata

  mike@badger:~$ tail -f /var/log/messages
  Jun 20 20:24:37 badger kernel: [  476.217222] scsi 2:0:0:0: [sdb] Sense not 
available.
  Jun 20 20:24:37 badger kernel: [  476.217230] scsi 2:0:0:0: [sdb] Write 
Protect is off
  Jun 20 20:24:37 badger kernel: [  476.324885] usb 4-1: new full speed USB 
device using uhci_hcd and address 3
  Jun 20 20:24:38 badger kernel: [  476.888758] usb 4-1: new full speed USB 
device using uhci_hcd and address 4
  Jun 20 20:24:39 badger kernel: [  477.456648] usb 4-1: new full speed USB 
device using uhci_hcd and address 5
  Jun 20 20:24:39 badger kernel: [  477.976533] usb 4-1: new full speed USB 
device using uhci_hcd and address 6
  Jun 20 20:37:20 badger -- MARK --
  Jun 20 20:57:20 badger -- MARK --
  Jun 20 21:17:20 badger -- MARK --
  Jun 20 21:37:20 badger -- MARK --
  Jun 20 21:41:19 badger kernel: [ 5077.147105] usb 4-1: new full speed USB 
device using uhci_hcd and address 7
  Jun 20 21:41:19 badger kernel: [ 5077.341241] usb 4-1: configuration #1 
chosen from 1 choice
  Jun 20 21:41:19 badger kernel: [ 5077.349158] usblp0: USB Bidirectional 
printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB802
  Jun 20 21:41:19 badger kernel: [ 5077.363071] scsi3 : SCSI emulation for USB 
Mass Storage devices
  Jun 20 21:41:24 badger kernel: [ 5082.381468] scsi 3:0:0:0: Direct-Access 
HP   Photosmart 7400  1.00 PQ: 0 ANSI: 2
  Jun 20 21:41:24 badger kernel: [ 5082.398537] sd 3:0:0:0: [sdb] Attached SCSI 
removable disk
  Jun 20 21:41:24 badger kernel: [ 5082.398592] sd 3:0:0:0: Attached scsi 
generic sg3 type 0
  Jun 20 21:57:20 badger -- MARK --
  Jun 20 22:17:20 badger -- MARK --
  Jun 20 22:37:20 badger -- MARK --

  mike@badger:~$ lpinfo -v
  network socket
  network beh
  direct hpfax
  direct 
hal:///org/freedesktop/Hal/devices/usb_device_3f0_b802_CN4B82V0WBUJ_if0_printer_CN4B82V0WBUJ
  direct usb://HP/Photosmart%207400%20series?serial=CN4B82V0WBUJ
  direct hp:/usb/Photosmart_7400_series?serial=CN4B82V0WBUJ
  network http
  network ipp
  network lpd
  direct parallel:/dev/lp0
  file cups-pdf:/
  direct scsi
  network smb
  mike@badger:~$

To manage notifications about this bug go to:
https://bugs.launchpad.net/hplip/+bug/241781/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to :

[Desktop-packages] [Bug 1401508] Re: Empty desktop

Ricardo Manuel Ribeiro Duarte, thank you for reporting this and helping make 
Ubuntu better.  Please execute the following command, as it will automatically 
gather debugging information, in a terminal:
apport-collect 1401508

Please ensure you have xdiagnose installed, and that you click the Yes
button for attaching additional debugging information.

When reporting bugs in the future please use apport by using 'ubuntu-
bug' and the name of the package affected. You can learn more about this
functionality at https://wiki.ubuntu.com/ReportingBugs.

** Package changed: xserver-xorg-video-nouveau (Ubuntu) = xorg (Ubuntu)

** Changed in: xorg (Ubuntu)
   Importance: Undecided = Low

** Changed in: xorg (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1352975] Re: GUI symbol for Wi-fi in 14.10 shows not connected even when connected

2014-12-13 Thread Artem

The same for me - question mark instead of connection strength.
Ubuntu 14.10, GNOME Shell 3.12.2, asus ux303ln.
iwlist scan shows the strength.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1352975

Title:
  GUI symbol for Wi-fi in 14.10 shows not connected even when connected

Status in One Hundred Papercuts:
  Confirmed
Status in network-manager package in Ubuntu:
  Confirmed
Status in wifi-radar package in Ubuntu:
  Invalid

Bug description:
  Using Ubuntu 14.10 alpha 2 with all updates. Clean install.
  Network manager 0.9.8.8-0ubuntu23
  Wifi-card: Intel Wireless 7260 (Rev 73)

  The Wi-fi symbol in the top right corner does not indicate that it is
  connected to Wi-fi even when it is connected. (It shows a question
  mark instead)

  Expected behavior is that it would show signal strength, or at the
  very least make it grey and remove the question mark.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: network-manager 0.9.8.8-0ubuntu23
  ProcVersionSignature: Ubuntu 3.16.0-6.11-generic 3.16.0-rc7
  Uname: Linux 3.16.0-6-generic x86_64
  NonfreeKernelModules: fglrx
  ApportVersion: 2.14.5-0ubuntu3
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Tue Aug  5 17:42:57 2014
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  InstallationDate: Installed on 2014-08-05 (0 days ago)
  InstallationMedia: Ubuntu-GNOME 14.10 Utopic Unicorn - Alpha amd64 
(20140730)
  IpRoute:
   default via 192.168.0.1 dev wlan0  proto static 
   192.168.0.0/24 dev wlan0  proto kernel  scope link  src 192.168.0.110  
metric 9
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-con:
   NAME  UUID   TYPE
  TIMESTAMPTIMESTAMP-REAL AUTOCONNECT   READONLY   
DBUS-PATH 
   Wired connection 18b6987c1-3f15-4b41-be88-ea9f5ae9eff6   
802-3-ethernet1407252000   ti. 05. aug. 2014 kl. 17.20 +0200  yes   
no /org/freedesktop/NetworkManager/Settings/1
   Diskokatt 5Ghz6a2433b7-9e20-4c4a-9c9d-455fee3505ef   
802-11-wireless   1407253201   ti. 05. aug. 2014 kl. 17.40 +0200  yes   
no /org/freedesktop/NetworkManager/Settings/0
  nmcli-dev:
   DEVICE TYPE  STATE DBUS-PATH 
 
   wlan0  802-11-wireless   connected 
/org/freedesktop/NetworkManager/Devices/1  
   eth0   802-3-ethernetunavailable   
/org/freedesktop/NetworkManager/Devices/0
  nmcli-nm:
   RUNNING VERSIONSTATE   NET-ENABLED   WIFI-HARDWARE   
WIFI   WWAN-HARDWARE   WWAN  
   running 0.9.8.8connected   enabled   enabled 
enabledenabled disabled

To manage notifications about this bug go to:
https://bugs.launchpad.net/hundredpapercuts/+bug/1352975/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402181] [NEW] nvidia-331-updates 331.113-0ubuntu0.0.4: nvidia-331-updates kernel module failed to build

2014-12-13 Thread Markus

Public bug reported:

after actualisation I was informed about the bug, I didn't notice any
reaction/problem (system note)

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: nvidia-331-updates 331.113-0ubuntu0.0.4
ProcVersionSignature: Ubuntu 3.13.0-41.70-generic 3.13.11.11
Uname: Linux 3.13.0-41-generic i686
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: i386
DKMSKernelVersion: 3.13.0-43-generic
Date: Sat Dec 13 11:21:32 2014
InstallationDate: Installed on 2014-08-18 (116 days ago)
InstallationMedia: Ubuntu 12.04.5 LTS Precise Pangolin - Release i386 
(20140807.1)
PackageVersion: 331.113-0ubuntu0.0.4
SourcePackage: nvidia-graphics-drivers-331-updates
Title: nvidia-331-updates 331.113-0ubuntu0.0.4: nvidia-331-updates kernel 
module failed to build
UpgradeStatus: Upgraded to trusty on 2014-08-19 (115 days ago)

** Affects: nvidia-graphics-drivers-331-updates (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-package i386 trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331-updates in
Ubuntu.
https://bugs.launchpad.net/bugs/1402181

Title:
  nvidia-331-updates 331.113-0ubuntu0.0.4: nvidia-331-updates kernel
  module failed to build

Status in nvidia-graphics-drivers-331-updates package in Ubuntu:
  New

Bug description:
  after actualisation I was informed about the bug, I didn't notice any
  reaction/problem (system note)

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-331-updates 331.113-0ubuntu0.0.4
  ProcVersionSignature: Ubuntu 3.13.0-41.70-generic 3.13.11.11
  Uname: Linux 3.13.0-41-generic i686
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: i386
  DKMSKernelVersion: 3.13.0-43-generic
  Date: Sat Dec 13 11:21:32 2014
  InstallationDate: Installed on 2014-08-18 (116 days ago)
  InstallationMedia: Ubuntu 12.04.5 LTS Precise Pangolin - Release i386 
(20140807.1)
  PackageVersion: 331.113-0ubuntu0.0.4
  SourcePackage: nvidia-graphics-drivers-331-updates
  Title: nvidia-331-updates 331.113-0ubuntu0.0.4: nvidia-331-updates kernel 
module failed to build
  UpgradeStatus: Upgraded to trusty on 2014-08-19 (115 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331-updates/+bug/1402181/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1389858] Re: Libreoffice calc 4.2.7-0ubuntu1 not updating references after sort

2014-12-13 Thread Manuel Iglesias Alonso

I know that this bug is closed. But should not you wait for some user
feedback?

In my opinion the updated Libreoffice calc still doesn't work correctly.
As I stated above: sorting is a tool that allows me to do painlessly what I 
could do 'manually' by, laboriously, inserting/removing, cutting and pasting 
rows.
For me the correct sorting behaviour should be undistinguishable from sorting 
'by hand'.

Find attached an spreadsheet document that, using the updated LibreOffice, 
behaves differently depending on the way ('by hand' or 'Data/Sort') a table is 
sorted.
Behaviour is the same if '/usr/lib/libreoffice/share/registry/main.xcd' is 
edited according to Björn Michaelsen's instructions in #11.

** Attachment added: LibreOffice calc document
   
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1389858/+attachment/4280240/+files/Test2.ods

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1389858

Title:
  Libreoffice calc 4.2.7-0ubuntu1 not updating references after sort

Status in LibreOffice Productivity Suite:
  Unknown
Status in libreoffice package in Ubuntu:
  Fix Released
Status in libreoffice source package in Trusty:
  Fix Released

Bug description:
  Update to LibreOffice 4.2.7 is causing incorrect sort behaviour in
  Calc.

  As initially reported here:

  
http://www.reddit.com/r/Ubuntu/comments/2le7qu/libreoffice_calc_update_a_few_hours_ago_is_buggy/

  Attached is sample Calc document. To reproduce, highlight B6 to E14,
  select Sort and sort by Column D, see that column E didn't get sorted.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: libreoffice (not installed)
  ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4
  Uname: Linux 3.16.0-24-generic x86_64
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Nov  5 15:49:03 2014
  InstallationDate: Installed on 2013-11-26 (344 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 
(20131016.1)
  SourcePackage: libreoffice
  UpgradeStatus: Upgraded to utopic on 2014-10-08 (27 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/df-libreoffice/+bug/1389858/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1369673] Re: LibreOffice kde file dialog integration broken (not working) in 14.04

2014-12-13 Thread Kruse

It seems to be also a problem in Qt. See Debian Bug #752230

https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752230

** Bug watch added: Debian Bug tracker #752230
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752230

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1369673

Title:
  LibreOffice kde file dialog integration broken (not working) in 14.04

Status in libreoffice package in Ubuntu:
  Confirmed

Bug description:
  Screenshot: http://www.dodaj.rs/f/22/pb/1Vu8cW0n/snapshot58.png

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: libreoffice-kde (not installed)
  Uname: Linux 3.16.2-031602-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.4
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Mon Sep 15 19:17:48 2014
  InstallationDate: Installed on 2014-02-02 (224 days ago)
  InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140202)
  SourcePackage: libreoffice
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1369673/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402184] [NEW] nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build

2014-12-13 Thread Richard

Public bug reported:

Error when installing nvidia-331-uvm

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: nvidia-331-uvm 331.113-0ubuntu0.0.4
ProcVersionSignature: Ubuntu 3.13.0-43.72-generic 3.13.11.11
Uname: Linux 3.13.0-43-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
DKMSKernelVersion: 3.13.0-43-generic
Date: Sat Dec 13 12:18:34 2014
InstallationDate: Installed on 2014-09-21 (82 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2)
PackageVersion: 331.113-0ubuntu0.0.4
SourcePackage: nvidia-graphics-drivers-331
Title: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed 
to build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: nvidia-graphics-drivers-331 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1402184

Title:
  nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module
  failed to build

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  New

Bug description:
  Error when installing nvidia-331-uvm

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-331-uvm 331.113-0ubuntu0.0.4
  ProcVersionSignature: Ubuntu 3.13.0-43.72-generic 3.13.11.11
  Uname: Linux 3.13.0-43-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  DKMSKernelVersion: 3.13.0-43-generic
  Date: Sat Dec 13 12:18:34 2014
  InstallationDate: Installed on 2014-09-21 (82 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
  PackageVersion: 331.113-0ubuntu0.0.4
  SourcePackage: nvidia-graphics-drivers-331
  Title: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1402184/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 241781] Re: hp photosmart 7450 communication problems.

This seems to be a wake-up problem on some (probably older) printer
models.

Usually, a printer should wake up from power-saving mode simply by
sending a job (or even any kind of status or ink level request) to the
printer, a special wake-up command should not be needed. But one never
knows whether there are printers needing a wake-up command or printers
with a hardware/firmware bug.

Can someone of the HPLIP developers at HP have a look into this and
perhaps let HPLIP somehow precede print jobs with some wake-up command,
at least for printer groups where this is needed or even to all printers
where it is safe?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to hplip in Ubuntu.
https://bugs.launchpad.net/bugs/241781

Title:
  hp photosmart 7450 communication problems.

Status in HP Linux Imaging and Printing:
  New
Status in hplip package in Ubuntu:
  Incomplete

Bug description:
  My HP photosmart 7450 printer has been showing some communication problems 
since using Hardy.  Prior to this, I've been running Debian stable on exactly 
the same hardware without any printer problems.  The symptoms are:
  printer is detected as photosmart 7400  appears to install correctly.  I can 
sometimes initially print one or two pages, then it locks up completely, I get 
a pop-up notice on the top panel about printer supplies low (although it 
isn't).  At this point, the printer firmware appears to have hung - it doesn't 
respond to front-panel button presses  the only way to get it to respond is to 
pull the power supply for a few seconds.  On reconnecting, it sometimes prints, 
sometimes doesn't.  
  I've tried uninstalling the hplip package and installing the latest version 
(2.8.5) from the hp website.  It didn't make any difference, the symptoms are 
unchanged.  

  It looks like there's another user with the same problem:
  http://ubuntuforums.org/showthread.php?t=809469highlight=photosmart+7450 

  Following the advice from the debugging printer problems page:
  mike@badger:~$ lsmod |grep usb
  usb_storage73664  0 
  libusual   19108  1 usb_storage
  usblp  15872  0 
  usbhid 31872  0 
  hid38784  1 usbhid
  usbcore   146028  8 
usb_storage,libusual,usblp,usbhid,ehci_hcd,uhci_hcd
  scsi_mod  151436  5 usb_storage,sg,sr_mod,sd_mod,libata

  mike@badger:~$ tail -f /var/log/messages
  Jun 20 20:24:37 badger kernel: [  476.217222] scsi 2:0:0:0: [sdb] Sense not 
available.
  Jun 20 20:24:37 badger kernel: [  476.217230] scsi 2:0:0:0: [sdb] Write 
Protect is off
  Jun 20 20:24:37 badger kernel: [  476.324885] usb 4-1: new full speed USB 
device using uhci_hcd and address 3
  Jun 20 20:24:38 badger kernel: [  476.888758] usb 4-1: new full speed USB 
device using uhci_hcd and address 4
  Jun 20 20:24:39 badger kernel: [  477.456648] usb 4-1: new full speed USB 
device using uhci_hcd and address 5
  Jun 20 20:24:39 badger kernel: [  477.976533] usb 4-1: new full speed USB 
device using uhci_hcd and address 6
  Jun 20 20:37:20 badger -- MARK --
  Jun 20 20:57:20 badger -- MARK --
  Jun 20 21:17:20 badger -- MARK --
  Jun 20 21:37:20 badger -- MARK --
  Jun 20 21:41:19 badger kernel: [ 5077.147105] usb 4-1: new full speed USB 
device using uhci_hcd and address 7
  Jun 20 21:41:19 badger kernel: [ 5077.341241] usb 4-1: configuration #1 
chosen from 1 choice
  Jun 20 21:41:19 badger kernel: [ 5077.349158] usblp0: USB Bidirectional 
printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB802
  Jun 20 21:41:19 badger kernel: [ 5077.363071] scsi3 : SCSI emulation for USB 
Mass Storage devices
  Jun 20 21:41:24 badger kernel: [ 5082.381468] scsi 3:0:0:0: Direct-Access 
HP   Photosmart 7400  1.00 PQ: 0 ANSI: 2
  Jun 20 21:41:24 badger kernel: [ 5082.398537] sd 3:0:0:0: [sdb] Attached SCSI 
removable disk
  Jun 20 21:41:24 badger kernel: [ 5082.398592] sd 3:0:0:0: Attached scsi 
generic sg3 type 0
  Jun 20 21:57:20 badger -- MARK --
  Jun 20 22:17:20 badger -- MARK --
  Jun 20 22:37:20 badger -- MARK --

  mike@badger:~$ lpinfo -v
  network socket
  network beh
  direct hpfax
  direct 
hal:///org/freedesktop/Hal/devices/usb_device_3f0_b802_CN4B82V0WBUJ_if0_printer_CN4B82V0WBUJ
  direct usb://HP/Photosmart%207400%20series?serial=CN4B82V0WBUJ
  direct hp:/usb/Photosmart_7400_series?serial=CN4B82V0WBUJ
  network http
  network ipp
  network lpd
  direct parallel:/dev/lp0
  file cups-pdf:/
  direct scsi
  network smb
  mike@badger:~$

To manage notifications about this bug go to:
https://bugs.launchpad.net/hplip/+bug/241781/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401884] Re: pad is unfunctionnal sur fujitsu lifebook serie A 544

2014-12-13 Thread Alain BOURDEAU

** Changed in: xorg (Ubuntu)
   Status: Invalid = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401884

Title:
  pad is unfunctionnal sur fujitsu lifebook serie A 544

Status in xorg package in Ubuntu:
  Fix Released

Bug description:
  Bonjour,Alain Bourdeau

  Sur cet ordinateur, le pad ne fonctionne pas malgrès toutes les
  tentatives en suvant les listes d'informations.

  Que faire ?

  Merci

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-43.72-generic 3.13.11.11
  Uname: Linux 3.13.0-43-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Fri Dec 12 14:18:37 2014
  DistUpgraded: 2014-09-17 13:25:56,451 DEBUG enabling apt cron job
  DistroCodename: trusty
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes, including running git bisection searches
  GraphicsCard:
   Intel Corporation 4th Gen Core Processor Integrated Graphics Controller 
[8086:0416] (rev 06) (prog-if 00 [VGA controller])
 Subsystem: Fujitsu Limited. Device [10cf:17a9]
  InstallationDate: Installed on 2012-06-10 (915 days ago)
  InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 
20120425-15:28
  MachineType: FUJITSU LIFEBOOK A544
  ProcEnviron:
   LANGUAGE=fr_FR
   PATH=(custom, no user)
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-43-generic 
root=UUID=f3967c6f-eef4-4562-b7f7-3efed53f1833 ro quiet splash i8042.nomux 
vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: Upgraded to trusty on 2014-09-17 (86 days ago)
  dmi.bios.date: 05/09/2014
  dmi.bios.vendor: FUJITSU // Phoenix Technologies Ltd.
  dmi.bios.version: Version 1.17
  dmi.board.name: FJNBB35
  dmi.board.vendor: FUJITSU
  dmi.chassis.type: 10
  dmi.chassis.vendor: FUJITSU
  dmi.modalias: 
dmi:bvnFUJITSU//PhoenixTechnologiesLtd.:bvrVersion1.17:bd05/09/2014:svnFUJITSU:pnLIFEBOOKA544:pvr:rvnFUJITSU:rnFJNBB35:rvr:cvnFUJITSU:ct10:cvr:
  dmi.product.name: LIFEBOOK A544
  dmi.sys.vendor: FUJITSU
  version.compiz: compiz 1:0.9.11.3+14.04.20141104-0ubuntu1
  version.ia32-libs: ia32-libs 20090808ubuntu36
  version.libdrm2: libdrm2 2.4.52-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.2
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.5
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.3
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Fri Dec 12 14:11:30 2014
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   13890 
   vendor SEC
  xserver.version: 2:1.15.1-0ubuntu2.5

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401884/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1396851] Re: [needs-packaging] Add package containing Unity Greeter badges

2014-12-13 Thread Doug Torrance

Thank you!  I unsubscribed ubuntu-sponsors.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-greeter in Ubuntu.
https://bugs.launchpad.net/bugs/1396851

Title:
  [needs-packaging] Add package containing Unity Greeter badges

Status in motif package in Ubuntu:
  Fix Released
Status in unity-greeter package in Ubuntu:
  In Progress
Status in motif package in Debian:
  Fix Released

Bug description:
  Currently, only a small number of potential desktops have badges
  shipped with Unity Greeter.  Other desktops are supposed to ship their
  own [1].  However, some desktop packagers would prefer not to do this.
  For example, the MATE packagers would prefer to keep the packages the
  same in Debian and Ubuntu, and therefore would like to avoid an
  Ubuntu-specific patch like adding a Unity Greeter badge [2].

  One solution, which would keep these badges both out of the unity-
  greeter package and out of the various desktop packages, would be to
  package the badges available at [3] together in a single package.  I
  am an experienced Debian maintainer and plan to create such a package
  soon.

  [1] https://lists.ubuntu.com/archives/ubuntu-devel/2012-February/034800.html
  [2] 
https://code.launchpad.net/~profzoom/ubuntu/vivid/mate-session-manager/mate-session-manager-fix-1393010/+merge/241874
  [3] http://gnome-look.org/content/show.php/?content=158764

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/motif/+bug/1396851/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402194] [NEW] PCI/internal sound card not detected

2014-12-13 Thread David Chatterton

Public bug reported:

This bug relates to the internal sound hardware in a Dell XPS 13 laptop.
Since accepting an upgrade to the latest Ubuntu Extra software today,
the Systems Settings  Sound  Output no longer show the internal
speakers, despite numerous attempts to shut down and restart.

Before accepting the upgrade, the sound played normally through the
speakers.

Having upgraded the system from the Ubuntu 12.10 originally installed
with the laptop and finding comments relating to the software drivers
for the Intel WiFi and Bluetooth chip (Intel AC 7520) and touch screen,
I tried out an installation straight from a Ubuntu 14.04 bootable USB
stick. The system worked well enough without these drivers so I went
ahead and replaced the whole installation from the USB stick and
subsequently accepted the upgrade to 14.10.

I tried plugging in a headset and this produced a screen allowing me to
select the type of headset (mono, with or without mic or stereo). An
extra entry appeared in the System Settings  Sound  Output pane
allowing me to choose between the headset or the speakers and to test
the audio on each one. However, unplugging the headset seemed to produce
intermittent behaviour, the system being uncertain as to whether the
headset was in use. This was solved by re-booting and the system and
speakers behaved as expected.

Now I have the situation that the speakers are not shown in the Sound 
Output pane and the Output Volume slider stays at zero and is unable to
be moved with the pointer. The volume control slider in the dropdown
panel from the speaker symbol in the system tray appears to respond to
movement from the pointer and the Fn-F11  F12 keys. However, with no
output device shown, there is no sound output to the speakers.

Several attempts to restart the system have failed to restore the
speaker functionality.

ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: alsa-base 1.0.25+dfsg-0ubuntu4
ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1
Uname: Linux 3.16.0-28-generic x86_64
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  david  2172 F pulseaudio
CurrentDesktop: Unity
Date: Sat Dec 13 13:28:32 2014
InstallationDate: Installed on 2014-12-11 (1 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2)
PackageArchitecture: all
ProcEnviron:
 LANGUAGE=en_GB:en
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=set
 LANG=en_GB.UTF-8
 SHELL=/bin/bash
SourcePackage: alsa-driver
Symptom: audio
Title: PCI/internal sound card not detected
UpgradeStatus: Upgraded to utopic on 2014-12-11 (1 days ago)
dmi.bios.date: 09/11/2014
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A05
dmi.board.name: 0D13CR
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: 0.1
dmi.modalias: 
dmi:bvnDellInc.:bvrA05:bd09/11/2014:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0D13CR:rvrA00:cvnDellInc.:ct8:cvr0.1:
dmi.product.name: XPS13 9333
dmi.sys.vendor: Dell Inc.

** Affects: alsa-driver (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug utopic

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1402194

Title:
  PCI/internal sound card not detected

Status in alsa-driver package in Ubuntu:
  New

Bug description:
  This bug relates to the internal sound hardware in a Dell XPS 13
  laptop. Since accepting an upgrade to the latest Ubuntu Extra software
  today, the Systems Settings  Sound  Output no longer show the
  internal speakers, despite numerous attempts to shut down and restart.

  Before accepting the upgrade, the sound played normally through the
  speakers.

  Having upgraded the system from the Ubuntu 12.10 originally installed
  with the laptop and finding comments relating to the software drivers
  for the Intel WiFi and Bluetooth chip (Intel AC 7520) and touch
  screen, I tried out an installation straight from a Ubuntu 14.04
  bootable USB stick. The system worked well enough without these
  drivers so I went ahead and replaced the whole installation from the
  USB stick and subsequently accepted the upgrade to 14.10.

  I tried plugging in a headset and this produced a screen allowing me
  to select the type of headset (mono, with or without mic or stereo).
  An extra entry appeared in the System Settings  Sound  Output pane
  allowing me to choose between the headset or the speakers and to test
  the audio on each one. However, unplugging the headset seemed to
  produce intermittent behaviour, the system being uncertain as to
  whether the headset was in use. This was solved by re-booting and the
  system and speakers behaved as expected.

  Now I have the situation that the speakers are not shown in the Sound
   Output pane and the Output Volume slider stays at zero and is unable
  to

[Desktop-packages] [Bug 1372172] Re: Network manager should connect to access point with strongest signal

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: network-manager (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1372172

Title:
  Network manager should connect to access point with strongest signal

Status in network-manager package in Ubuntu:
  Confirmed

Bug description:
  I work in an office with a number of access points and I work in
  different offices. Depending on the room  I'm in the access point with
  the strongest signal is not the same.

  What you expected to happen:
  Network Manager should try to connect to the stored wifi network with the 
strongest signal and not follow the list blindly.

  What happened instead:
  When I put my laptop on sleep and go to another office, Network Manager tries 
to connect to the first network that was added instead of the one with the 
strongest signal.

  ---
  Maybe one could check how Android manages Wifi connection and copy its code 
(it's a linux OS), because Android seems to connect to the strongest signal 
instead.

  Using Ubuntu 14.04.1 LTS 64 bit.
  network-manager version: 0.9.8.8-0ubuntu7

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1372172/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402194] Re: PCI/internal sound card not detected

2014-12-13 Thread David Chatterton

Just to add even more complication to the issue:

Having restarted the system yet again, I find that the Sound  Output
pane is now showing the Speakers, Built-in Audio under the Play sound
through list. The Test Sound button now works as expected and the Fn-F11
 F12 keys control the Output Volume slider (producing the adjustment
pop from the speakers into the bargain).

The problem really is one of intermittent detection and operation of the
sound hardware.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1402194

Title:
  PCI/internal sound card not detected

Status in alsa-driver package in Ubuntu:
  New

Bug description:
  This bug relates to the internal sound hardware in a Dell XPS 13
  laptop. Since accepting an upgrade to the latest Ubuntu Extra software
  today, the Systems Settings  Sound  Output no longer show the
  internal speakers, despite numerous attempts to shut down and restart.

  Before accepting the upgrade, the sound played normally through the
  speakers.

  Having upgraded the system from the Ubuntu 12.10 originally installed
  with the laptop and finding comments relating to the software drivers
  for the Intel WiFi and Bluetooth chip (Intel AC 7520) and touch
  screen, I tried out an installation straight from a Ubuntu 14.04
  bootable USB stick. The system worked well enough without these
  drivers so I went ahead and replaced the whole installation from the
  USB stick and subsequently accepted the upgrade to 14.10.

  I tried plugging in a headset and this produced a screen allowing me
  to select the type of headset (mono, with or without mic or stereo).
  An extra entry appeared in the System Settings  Sound  Output pane
  allowing me to choose between the headset or the speakers and to test
  the audio on each one. However, unplugging the headset seemed to
  produce intermittent behaviour, the system being uncertain as to
  whether the headset was in use. This was solved by re-booting and the
  system and speakers behaved as expected.

  Now I have the situation that the speakers are not shown in the Sound
   Output pane and the Output Volume slider stays at zero and is unable
  to be moved with the pointer. The volume control slider in the
  dropdown panel from the speaker symbol in the system tray appears to
  respond to movement from the pointer and the Fn-F11  F12 keys.
  However, with no output device shown, there is no sound output to the
  speakers.

  Several attempts to restart the system have failed to restore the
  speaker functionality.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1
  Uname: Linux 3.16.0-28-generic x86_64
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  david  2172 F pulseaudio
  CurrentDesktop: Unity
  Date: Sat Dec 13 13:28:32 2014
  InstallationDate: Installed on 2014-12-11 (1 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_GB:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Title: PCI/internal sound card not detected
  UpgradeStatus: Upgraded to utopic on 2014-12-11 (1 days ago)
  dmi.bios.date: 09/11/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A05
  dmi.board.name: 0D13CR
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnDellInc.:bvrA05:bd09/11/2014:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0D13CR:rvrA00:cvnDellInc.:ct8:cvr0.1:
  dmi.product.name: XPS13 9333
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1402194/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401635] Re: NVIDIA driver makes internet very slow

apport information

** Tags added: apport-collected compiz-0.9 ubuntu utopic

** Description changed:

  Here is information about bug:
  I am not a good computer spec, so I could not find reason of it, but, when I 
installed NVIDIA bin-331.89 driver from additional drivers, it appeared a bug 
so my internet became very slow. I use Realtek RTL8111/RTL8168... ethernet 
adapter. I have r8169 kernel driver in use(I am not allowed to modify internet 
stuff in this computer, cause this is actually my parent's PC). Wehn I 
installed NVIDIA driver, internet appeared to work very, very slow. After 
getting rid of it, it became nice again. Could you, please, look trought this 
and find something to fix this. Maybe you could gimme full tutorial on how to 
do it if I have:
  01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] 
(rev a1)
  03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
+ --- 
+ .tmp.unity.support.test.0:
+  
+ ApportVersion: 2.14.7-0ubuntu8
+ Architecture: amd64
+ CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
+ CompositorRunning: compiz
+ CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
+ CompositorUnredirectFSW: true
+ CurrentDesktop: Unity
+ DistUpgraded: 2014-12-01 17:54:03,868 DEBUG enabling apt cron job
+ DistroCodename: utopic
+ DistroRelease: Ubuntu 14.10
+ DistroVariant: ubuntu
+ GraphicsCard:
+  NVIDIA Corporation GF119 [GeForce GT 610] [10de:104a] (rev a1) (prog-if 00 
[VGA controller])
+Subsystem: CardExpert Technology Gainward GeForce GT 610 [10b0:104a]
+ InstallationDate: Installed on 2014-11-26 (17 days ago)
+ InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
+ MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
+ Package: xorg 1:7.7+7ubuntu2
+ PackageArchitecture: amd64
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=2e2221b2-b6c7-4553-815f-67afdc924a98 ro quiet splash vt.handoff=7
+ ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
+ Tags:  utopic ubuntu compiz-0.9
+ Uname: Linux 3.16.0-28-generic x86_64
+ UpgradeStatus: Upgraded to utopic on 2014-12-01 (11 days ago)
+ UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
+ _MarkForUpload: True
+ dmi.bios.date: 07/11/2013
+ dmi.bios.vendor: American Megatrends Inc.
+ dmi.bios.version: P1.90
+ dmi.board.name: H61M-VG3
+ dmi.board.vendor: ASRock
+ dmi.chassis.asset.tag: To Be Filled By O.E.M.
+ dmi.chassis.type: 3
+ dmi.chassis.vendor: To Be Filled By O.E.M.
+ dmi.chassis.version: To Be Filled By O.E.M.
+ dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP1.90:bd07/11/2013:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnH61M-VG3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
+ dmi.product.name: To Be Filled By O.E.M.
+ dmi.product.version: To Be Filled By O.E.M.
+ dmi.sys.vendor: To Be Filled By O.E.M.
+ version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
+ version.ia32-libs: ia32-libs N/A
+ version.libdrm2: libdrm2 2.4.56-1
+ version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
+ version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
+ version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
+ version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
+ version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
+ version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
+ version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
+ version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
+ xserver.bootTime: Sat Dec 13 10:47:27 2014
+ xserver.configfile: default
+ xserver.devices:
+  inputPower Button KEYBOARD, id 6
+  inputPower Button KEYBOARD, id 7
+  inputPIXART USB OPTICAL MOUSE MOUSE, id 8
+  inputUSB USB Keykoard KEYBOARD, id 9
+  inputUSB USB Keykoard KEYBOARD, id 10
+ xserver.errors:
+  Failed to load module nvidia (module does not exist, 0)
+  Failed to load module nvidia (module does not exist, 0)
+ xserver.logfile: /var/log/Xorg.0.log
+ xserver.version: 2:1.16.0-1ubuntu1.2
+ xserver.video_driver: nouveau

** Attachment added: BootDmesg.txt
   
https://bugs.launchpad.net/bugs/1401635/+attachment/4280292/+files/BootDmesg.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401635

Title:
  NVIDIA driver makes internet very slow

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Here is information about bug:
  I am not a good computer spec, so I could not find reason of it, but, when I 
installed NVIDIA bin-331.89

[Desktop-packages] [Bug 1401635] Re: NVIDIA driver makes internet very slow

P.S. I haven't installed NVIDIA bin driver now.
P.P.S. Should I also add my ethernet drivers apport and if so- how?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401635

Title:
  NVIDIA driver makes internet very slow

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Here is information about bug:
  I am not a good computer spec, so I could not find reason of it, but, when I 
installed NVIDIA bin-331.89 driver from additional drivers, it appeared a bug 
so my internet became very slow. I use Realtek RTL8111/RTL8168... ethernet 
adapter. I have r8169 kernel driver in use(I am not allowed to modify internet 
stuff in this computer, cause this is actually my parent's PC). Wehn I 
installed NVIDIA driver, internet appeared to work very, very slow. After 
getting rid of it, it became nice again. Could you, please, look trought this 
and find something to fix this. Maybe you could gimme full tutorial on how to 
do it if I have:
  01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] 
(rev a1)
  03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  DistUpgraded: 2014-12-01 17:54:03,868 DEBUG enabling apt cron job
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  GraphicsCard:
   NVIDIA Corporation GF119 [GeForce GT 610] [10de:104a] (rev a1) (prog-if 00 
[VGA controller])
 Subsystem: CardExpert Technology Gainward GeForce GT 610 [10b0:104a]
  InstallationDate: Installed on 2014-11-26 (17 days ago)
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
  MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=2e2221b2-b6c7-4553-815f-67afdc924a98 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: Upgraded to utopic on 2014-12-01 (11 days ago)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 07/11/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P1.90
  dmi.board.name: H61M-VG3
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP1.90:bd07/11/2013:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnH61M-VG3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To Be Filled By O.E.M.
  dmi.product.version: To Be Filled By O.E.M.
  dmi.sys.vendor: To Be Filled By O.E.M.
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 10:47:27 2014
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputPIXART USB OPTICAL MOUSE MOUSE, id 8
   inputUSB USB Keykoard KEYBOARD, id 9
   inputUSB USB Keykoard KEYBOARD, id 10
  xserver.errors:
   Failed to load module nvidia (module does not exist, 0)
   Failed to load module nvidia (module does not exist, 0)
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: nouveau

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401635/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe :

[Desktop-packages] [Bug 1401635] CurrentDmesg.txt

apport information

** Attachment added: CurrentDmesg.txt
   
https://bugs.launchpad.net/bugs/1401635/+attachment/4280294/+files/CurrentDmesg.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401635

Title:
  NVIDIA driver makes internet very slow

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Here is information about bug:
  I am not a good computer spec, so I could not find reason of it, but, when I 
installed NVIDIA bin-331.89 driver from additional drivers, it appeared a bug 
so my internet became very slow. I use Realtek RTL8111/RTL8168... ethernet 
adapter. I have r8169 kernel driver in use(I am not allowed to modify internet 
stuff in this computer, cause this is actually my parent's PC). Wehn I 
installed NVIDIA driver, internet appeared to work very, very slow. After 
getting rid of it, it became nice again. Could you, please, look trought this 
and find something to fix this. Maybe you could gimme full tutorial on how to 
do it if I have:
  01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] 
(rev a1)
  03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  DistUpgraded: 2014-12-01 17:54:03,868 DEBUG enabling apt cron job
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  GraphicsCard:
   NVIDIA Corporation GF119 [GeForce GT 610] [10de:104a] (rev a1) (prog-if 00 
[VGA controller])
 Subsystem: CardExpert Technology Gainward GeForce GT 610 [10b0:104a]
  InstallationDate: Installed on 2014-11-26 (17 days ago)
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
  MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=2e2221b2-b6c7-4553-815f-67afdc924a98 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: Upgraded to utopic on 2014-12-01 (11 days ago)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 07/11/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P1.90
  dmi.board.name: H61M-VG3
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP1.90:bd07/11/2013:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnH61M-VG3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To Be Filled By O.E.M.
  dmi.product.version: To Be Filled By O.E.M.
  dmi.sys.vendor: To Be Filled By O.E.M.
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 10:47:27 2014
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputPIXART USB OPTICAL MOUSE MOUSE, id 8
   inputUSB USB Keykoard KEYBOARD, id 9
   inputUSB USB Keykoard KEYBOARD, id 10
  xserver.errors:
   Failed to load module nvidia (module does not exist, 0)
   Failed to load module nvidia (module does not exist, 0)
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: nouveau

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401635/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to :

[Desktop-packages] [Bug 1401635] Re: NVIDIA driver makes internet very slow

OK! I sent that apport...

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401635

Title:
  NVIDIA driver makes internet very slow

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Here is information about bug:
  I am not a good computer spec, so I could not find reason of it, but, when I 
installed NVIDIA bin-331.89 driver from additional drivers, it appeared a bug 
so my internet became very slow. I use Realtek RTL8111/RTL8168... ethernet 
adapter. I have r8169 kernel driver in use(I am not allowed to modify internet 
stuff in this computer, cause this is actually my parent's PC). Wehn I 
installed NVIDIA driver, internet appeared to work very, very slow. After 
getting rid of it, it became nice again. Could you, please, look trought this 
and find something to fix this. Maybe you could gimme full tutorial on how to 
do it if I have:
  01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] 
(rev a1)
  03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  DistUpgraded: 2014-12-01 17:54:03,868 DEBUG enabling apt cron job
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  GraphicsCard:
   NVIDIA Corporation GF119 [GeForce GT 610] [10de:104a] (rev a1) (prog-if 00 
[VGA controller])
 Subsystem: CardExpert Technology Gainward GeForce GT 610 [10b0:104a]
  InstallationDate: Installed on 2014-11-26 (17 days ago)
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
  MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=2e2221b2-b6c7-4553-815f-67afdc924a98 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: Upgraded to utopic on 2014-12-01 (11 days ago)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 07/11/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P1.90
  dmi.board.name: H61M-VG3
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP1.90:bd07/11/2013:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnH61M-VG3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To Be Filled By O.E.M.
  dmi.product.version: To Be Filled By O.E.M.
  dmi.sys.vendor: To Be Filled By O.E.M.
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 10:47:27 2014
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputPIXART USB OPTICAL MOUSE MOUSE, id 8
   inputUSB USB Keykoard KEYBOARD, id 9
   inputUSB USB Keykoard KEYBOARD, id 10
  xserver.errors:
   Failed to load module nvidia (module does not exist, 0)
   Failed to load module nvidia (module does not exist, 0)
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: nouveau

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401635/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401635] BootLog.txt

apport information

** Attachment added: BootLog.txt
   
https://bugs.launchpad.net/bugs/1401635/+attachment/4280293/+files/BootLog.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401635

Title:
  NVIDIA driver makes internet very slow

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Here is information about bug:
  I am not a good computer spec, so I could not find reason of it, but, when I 
installed NVIDIA bin-331.89 driver from additional drivers, it appeared a bug 
so my internet became very slow. I use Realtek RTL8111/RTL8168... ethernet 
adapter. I have r8169 kernel driver in use(I am not allowed to modify internet 
stuff in this computer, cause this is actually my parent's PC). Wehn I 
installed NVIDIA driver, internet appeared to work very, very slow. After 
getting rid of it, it became nice again. Could you, please, look trought this 
and find something to fix this. Maybe you could gimme full tutorial on how to 
do it if I have:
  01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] 
(rev a1)
  03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell]
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  DistUpgraded: 2014-12-01 17:54:03,868 DEBUG enabling apt cron job
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  GraphicsCard:
   NVIDIA Corporation GF119 [GeForce GT 610] [10de:104a] (rev a1) (prog-if 00 
[VGA controller])
 Subsystem: CardExpert Technology Gainward GeForce GT 610 [10b0:104a]
  InstallationDate: Installed on 2014-11-26 (17 days ago)
  InstallationMedia: Ubuntu 12.04.3 LTS Precise Pangolin - Release amd64 
(20130820.1)
  MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=2e2221b2-b6c7-4553-815f-67afdc924a98 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: Upgraded to utopic on 2014-12-01 (11 days ago)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 07/11/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P1.90
  dmi.board.name: H61M-VG3
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP1.90:bd07/11/2013:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnH61M-VG3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To Be Filled By O.E.M.
  dmi.product.version: To Be Filled By O.E.M.
  dmi.sys.vendor: To Be Filled By O.E.M.
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 10:47:27 2014
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputPIXART USB OPTICAL MOUSE MOUSE, id 8
   inputUSB USB Keykoard KEYBOARD, id 9
   inputUSB USB Keykoard KEYBOARD, id 10
  xserver.errors:
   Failed to load module nvidia (module does not exist, 0)
   Failed to load module nvidia (module does not exist, 0)
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: nouveau

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401635/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net

[Desktop-packages] [Bug 1402199] [NEW] nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to build

2014-12-13 Thread Hary Schneider

Public bug reported:

system starting with this error

ProblemType: Package
DistroRelease: Ubuntu 14.10
Package: nvidia-331 331.113-0ubuntu0.1
ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4
Uname: Linux 3.16.0-24-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
DKMSKernelVersion: 3.16.0-28-generic
Date: Fri Dec 12 12:49:58 2014
InstallationDate: Installed on 2013-11-21 (386 days ago)
InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1)
PackageVersion: 331.113-0ubuntu0.1
SourcePackage: nvidia-graphics-drivers-331
Title: nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: nvidia-graphics-drivers-331 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package utopic

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1402199

Title:
  nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to
  build

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  New

Bug description:
  system starting with this error

  ProblemType: Package
  DistroRelease: Ubuntu 14.10
  Package: nvidia-331 331.113-0ubuntu0.1
  ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4
  Uname: Linux 3.16.0-24-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  DKMSKernelVersion: 3.16.0-28-generic
  Date: Fri Dec 12 12:49:58 2014
  InstallationDate: Installed on 2013-11-21 (386 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 
(20131016.1)
  PackageVersion: 331.113-0ubuntu0.1
  SourcePackage: nvidia-graphics-drivers-331
  Title: nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1402199/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402201] [NEW] nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 kernel module failed to build

2014-12-13 Thread cber...@gmail.com

Public bug reported:

screen freezes constantly. close to initiate hibernation and then reopen
is the fastest way I know to temporarily fix the issue. can happen every
minute or so. but sometimes not for hours.

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: nvidia-331 331.113-0ubuntu0.0.4
ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
Uname: Linux 3.13.0-37-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
DKMSKernelVersion: 3.13.0-43-generic
Date: Fri Dec 12 18:00:45 2014
InstallationDate: Installed on 2014-10-19 (55 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2)
PackageVersion: 331.113-0ubuntu0.0.4
SourcePackage: nvidia-graphics-drivers-331
Title: nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 kernel module failed to build
UpgradeStatus: No upgrade log present (probably fresh install)
modified.conffile..etc.modprobe.d.nvidia.331.hybrid.conf: [deleted]

** Affects: nvidia-graphics-drivers-331 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package gnome3-ppa third-party-packages trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1402201

Title:
  nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 kernel module failed to
  build

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  New

Bug description:
  screen freezes constantly. close to initiate hibernation and then
  reopen is the fastest way I know to temporarily fix the issue. can
  happen every minute or so. but sometimes not for hours.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-331 331.113-0ubuntu0.0.4
  ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
  Uname: Linux 3.13.0-37-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  DKMSKernelVersion: 3.13.0-43-generic
  Date: Fri Dec 12 18:00:45 2014
  InstallationDate: Installed on 2014-10-19 (55 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
  PackageVersion: 331.113-0ubuntu0.0.4
  SourcePackage: nvidia-graphics-drivers-331
  Title: nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 kernel module failed to 
build
  UpgradeStatus: No upgrade log present (probably fresh install)
  modified.conffile..etc.modprobe.d.nvidia.331.hybrid.conf: [deleted]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1402201/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1386620] Re: re-enable rotation for the intel driver in optimus mode

This bug was fixed in the package xorg-server - 2:1.16.2.901-1ubuntu2

---
xorg-server (2:1.16.2.901-1ubuntu2) vivid; urgency=medium

  * Fix FTBFS with the bool redefinition by undef'ing it after including mir.
 -- Maarten Lankhorst maarten.lankho...@ubuntu.com   Sat, 13 Dec 2014 
14:13:17 +0100

** Changed in: xorg-server (Ubuntu Vivid)
   Status: New = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1386620

Title:
  re-enable rotation for the intel driver in optimus mode

Status in HWE Next Project:
  Fix Released
Status in HWE Next trusty series:
  Fix Committed
Status in HWE Next utopic series:
  Fix Released
Status in HWE Next vivid series:
  Fix Released
Status in OEM Priority Project:
  New
Status in OEM Priority Project trusty series:
  New
Status in xorg-server package in Ubuntu:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Fix Released
Status in xserver-xorg-video-intel-lts-trusty package in Ubuntu:
  Invalid
Status in xorg-server source package in Precise:
  Invalid
Status in xserver-xorg-video-intel source package in Precise:
  Invalid
Status in xserver-xorg-video-intel-lts-trusty source package in Precise:
  Fix Released
Status in xorg-server source package in Trusty:
  Fix Committed
Status in xserver-xorg-video-intel source package in Trusty:
  Fix Released
Status in xserver-xorg-video-intel-lts-trusty source package in Trusty:
  Invalid
Status in xorg-server source package in Utopic:
  New
Status in xserver-xorg-video-intel source package in Utopic:
  Fix Released
Status in xserver-xorg-video-intel-lts-trusty source package in Utopic:
  Invalid
Status in xorg-server source package in Vivid:
  Fix Released
Status in xserver-xorg-video-intel source package in Vivid:
  Fix Released
Status in xserver-xorg-video-intel-lts-trusty source package in Vivid:
  Invalid

Bug description:
  [Impact] 
   * The fix for bug #1308515 prevents rotation from being used.
   * Rotation support should be added to the intel driver to maintain feature 
parity when optimus is used vs when not in use.

  [Test Case]
   * Run xrandr --output SOMEOUTPUT --rotation left
  - Expected: Screen should rotate.
  - Bad behavior: Succeeds, but causes a black screen. OR the call fails, 
and screen is not rotated.

  [Regression Potential] 
   * Will probably regress when modesetting is used, a separate patch might be 
needed to disable transforms on modesetting. Will have to be tested.

  [Other Info]
   n/a

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1386620/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402202] [NEW] nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build

2014-12-13 Thread Andreas

Public bug reported:

dont know

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: nvidia-331-uvm 331.113-0ubuntu0.0.4
ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
Uname: Linux 3.13.0-40-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
DKMSKernelVersion: 3.13.0-43-generic
Date: Sat Dec 13 15:27:08 2014
InstallationDate: Installed on 2014-11-17 (25 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.2)
PackageVersion: 331.113-0ubuntu0.0.4
SourcePackage: nvidia-graphics-drivers-331
Title: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed 
to build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: nvidia-graphics-drivers-331 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1402202

Title:
  nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module
  failed to build

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  New

Bug description:
  dont know

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-331-uvm 331.113-0ubuntu0.0.4
  ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
  Uname: Linux 3.13.0-40-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  DKMSKernelVersion: 3.13.0-43-generic
  Date: Sat Dec 13 15:27:08 2014
  InstallationDate: Installed on 2014-11-17 (25 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
  PackageVersion: 331.113-0ubuntu0.0.4
  SourcePackage: nvidia-graphics-drivers-331
  Title: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module 
failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1402202/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402204] [NEW] package nvidia-331-updates 331.113-0ubuntu0.1 failed to install/upgrade: Unterprozess installiertes post-removal-Skript gab den Fehlerwert 8 zurück

2014-12-13 Thread Markus

Public bug reported:

wanted to change from the updates-version to the non-updates version.

ProblemType: Package
DistroRelease: Ubuntu 14.10
Package: nvidia-331-updates 331.113-0ubuntu0.1
ProcVersionSignature: Ubuntu 3.16.0-28.37-lowlatency 3.16.7-ckt1
Uname: Linux 3.16.0-28-lowlatency x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.7-0ubuntu8
AptOrdering:
 nvidia-331-updates: Remove
 nvidia-331: Install
 nvidia-331: Configure
Architecture: amd64
Date: Sat Dec 13 15:27:50 2014
DuplicateSignature: package:nvidia-331-updates:331.113-0ubuntu0.1:Unterprozess 
installiertes post-removal-Skript gab den Fehlerwert 8 zurück
ErrorMessage: Unterprozess installiertes post-removal-Skript gab den Fehlerwert 
8 zurück
SourcePackage: nvidia-graphics-drivers-331-updates
Title: package nvidia-331-updates 331.113-0ubuntu0.1 failed to install/upgrade: 
Unterprozess installiertes post-removal-Skript gab den Fehlerwert 8 zurück
UpgradeStatus: Upgraded to utopic on 2014-10-20 (54 days ago)
modified.conffile..etc.modprobe.d.nvidia.331.updates.hybrid.conf: [deleted]

** Affects: nvidia-graphics-drivers-331-updates (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package utopic

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331-updates in
Ubuntu.
https://bugs.launchpad.net/bugs/1402204

Title:
  package nvidia-331-updates 331.113-0ubuntu0.1 failed to
  install/upgrade: Unterprozess installiertes post-removal-Skript gab
  den Fehlerwert 8 zurück

Status in nvidia-graphics-drivers-331-updates package in Ubuntu:
  New

Bug description:
  wanted to change from the updates-version to the non-updates
  version.

  ProblemType: Package
  DistroRelease: Ubuntu 14.10
  Package: nvidia-331-updates 331.113-0ubuntu0.1
  ProcVersionSignature: Ubuntu 3.16.0-28.37-lowlatency 3.16.7-ckt1
  Uname: Linux 3.16.0-28-lowlatency x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.7-0ubuntu8
  AptOrdering:
   nvidia-331-updates: Remove
   nvidia-331: Install
   nvidia-331: Configure
  Architecture: amd64
  Date: Sat Dec 13 15:27:50 2014
  DuplicateSignature: 
package:nvidia-331-updates:331.113-0ubuntu0.1:Unterprozess installiertes 
post-removal-Skript gab den Fehlerwert 8 zurück
  ErrorMessage: Unterprozess installiertes post-removal-Skript gab den 
Fehlerwert 8 zurück
  SourcePackage: nvidia-graphics-drivers-331-updates
  Title: package nvidia-331-updates 331.113-0ubuntu0.1 failed to 
install/upgrade: Unterprozess installiertes post-removal-Skript gab den 
Fehlerwert 8 zurück
  UpgradeStatus: Upgraded to utopic on 2014-10-20 (54 days ago)
  modified.conffile..etc.modprobe.d.nvidia.331.updates.hybrid.conf: [deleted]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331-updates/+bug/1402204/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402204] Re: package nvidia-331-updates 331.113-0ubuntu0.1 failed to install/upgrade: Unterprozess installiertes post-removal-Skript gab den Fehlerwert 8 zurück

2014-12-13 Thread Apport retracing service

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331-updates in
Ubuntu.
https://bugs.launchpad.net/bugs/1402204

Title:
  package nvidia-331-updates 331.113-0ubuntu0.1 failed to
  install/upgrade: Unterprozess installiertes post-removal-Skript gab
  den Fehlerwert 8 zurück

Status in nvidia-graphics-drivers-331-updates package in Ubuntu:
  New

Bug description:
  wanted to change from the updates-version to the non-updates
  version.

  ProblemType: Package
  DistroRelease: Ubuntu 14.10
  Package: nvidia-331-updates 331.113-0ubuntu0.1
  ProcVersionSignature: Ubuntu 3.16.0-28.37-lowlatency 3.16.7-ckt1
  Uname: Linux 3.16.0-28-lowlatency x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.7-0ubuntu8
  AptOrdering:
   nvidia-331-updates: Remove
   nvidia-331: Install
   nvidia-331: Configure
  Architecture: amd64
  Date: Sat Dec 13 15:27:50 2014
  DuplicateSignature: 
package:nvidia-331-updates:331.113-0ubuntu0.1:Unterprozess installiertes 
post-removal-Skript gab den Fehlerwert 8 zurück
  ErrorMessage: Unterprozess installiertes post-removal-Skript gab den 
Fehlerwert 8 zurück
  SourcePackage: nvidia-graphics-drivers-331-updates
  Title: package nvidia-331-updates 331.113-0ubuntu0.1 failed to 
install/upgrade: Unterprozess installiertes post-removal-Skript gab den 
Fehlerwert 8 zurück
  UpgradeStatus: Upgraded to utopic on 2014-10-20 (54 days ago)
  modified.conffile..etc.modprobe.d.nvidia.331.updates.hybrid.conf: [deleted]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331-updates/+bug/1402204/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1176647]

2014-12-13 Thread Adf-lists

(In reply to Andy Furniss from comment #16)
 (In reply to Andy Furniss from comment #15)
 
  I only recently started seeing locks - turns out that dri3 was OK for me,
  but of course it then got disabled by default and I started getting locks.
 
 It seems I was a bit hasty in calling dri3 OK - I can lock if I try long
 enough, just that it takes about 20x longer than dri2.

Looks like the locks were a mesa issue which is now fixed.

I can't point to a commit, but the reason I suspect mesa is that I
changed my test case to s/w decode no de-int fps  refresh and could
lock/not lock depending on the level of gl output chosen in kodi.

dri2 is still  dri3 - neither lock but 2 glitches occasionally.

Anyway, I guess I am in the wrong bug, sorry for the noise.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1176647

Title:
  [snb] random hard lockup whilst using Xv

Status in X.org xf86-video-intel:
  Incomplete
Status in xserver-xorg-video-intel package in Ubuntu:
  Incomplete

Bug description:
  When using the system for some time, at some point display freezes. The 
system seems to continue working as mplayer remains streaming internet radio 
and also the audio output works properly. During this lock-up the mouse can be 
moved but any click is ignored. Furthermore any attempt to switch to a TTY is 
ignored as well. Even worse the power button does not trigger a shutdown. 
Therefore I usually hard reset by pressing the power button for several seconds.
  I first witnessed this bug after upgrading to 13.04 (from 12.04). To make 
sure, I freshly installed Ubuntu, but unfortunately this did not help avoing 
the bug.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: xorg 1:7.7+1ubuntu4
  ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8
  Uname: Linux 3.8.0-19-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.9.2-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  Date: Sun May  5 21:27:55 2013
  DistUpgraded: Fresh install
  DistroCodename: raring
  DistroVariant: ubuntu
  DkmsStatus: virtualbox, 4.2.10, 3.8.0-19-generic, x86_64: installed
  ExtraDebuggingInterest: I just need to know a workaround
  GpuHangFrequency: Several times a day
  GpuHangReproducibility: Seems to happen randomly
  GpuHangStarted: Immediately after installing this version of Ubuntu
  GraphicsCard:
   Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:21da]
  InstallationDate: Installed on 2013-05-05 (0 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  MachineType: LENOVO 4290W4H
  MarkForUpload: True
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-19-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  SourcePackage: xorg
  Symptom: display
  Title: Xorg freeze
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/02/2011
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 8DET51WW (1.21 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 4290W4H
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr8DET51WW(1.21):bd08/02/2011:svnLENOVO:pn4290W4H:pvrThinkPadX220:rvnLENOVO:rn4290W4H:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 4290W4H
  dmi.product.version: ThinkPad X220
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.43-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 9.1.1-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 9.1.1-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.13.3-0ubuntu6
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.3-0ubuntu2b2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.1.0-0ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.21.6-0ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.7-0ubuntu1
  xserver.bootTime: Sun May  5 21:09:18 2013
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.13.3-0ubuntu6
  xserver.video_driver: intel

To manage notifications about this bug go to:
https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1176647/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More

[Desktop-packages] [Bug 1340272] Re: Synergy stuck bottom right

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: xorg-server (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1340272

Title:
  Synergy stuck bottom right

Status in xorg-server package in Ubuntu:
  Confirmed

Bug description:
  I have been using synergy for some time, between a Windows 8.1 machine
  to control a Ubuntu 12.04 LTS, from today I can use it properly, the
  mouse icon is stuck in bottom right screen, keyboard works fine, but
  not the mouse.

  Windows Machine is the server and is placed in the right side, Ubuntu
  12.04 is the client, and is placed in the left side. I´ve tried
  uninstalling, rebooting, using different versions of synergy (1.4.10,
  1.4.18 and 1.5) all of them present the same bug.

  synergy logs show me this information when I move the cursor to the
  Ubuntu Machine:

  
  DEBUG1: try to leave ericom-T420 on right
  DEBUG1: no neighbor right
  DEBUG2: clamp to right of ericom-T420
  DEBUG2: clamp to bottom of ericom-T420
  DEBUG2: onMouseMoveSecondary +176,+101
  DEBUG2: find neighbor on right of ericom-T420
  DEBUG2: no neighbor on right of ericom-T420
  DEBUG1: try to leave ericom-T420 on right

  (ericom-T420 is the Ubuntu Machine)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1340272/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1340272] Re: Synergy stuck bottom right

2014-12-13 Thread Joshua Issac

The correspondng issue on the Synergy project is Issue 4041:
https://github.com/synergy/synergy/issues/4041

The following workaround (for the server running Windows) described
there worked for me:

1. Locate synergys.exe in the Program Files (or Program Files (x86)) directory
2. Open the Properties dialogue box and switch to the Compatibility tab
3. Click the Change settings for all users button, and tick Disable display 
scaling on high DPI settings
4. Accept the changes and restart the computer

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1340272

Title:
  Synergy stuck bottom right

Status in xorg-server package in Ubuntu:
  Confirmed

Bug description:
  I have been using synergy for some time, between a Windows 8.1 machine
  to control a Ubuntu 12.04 LTS, from today I can use it properly, the
  mouse icon is stuck in bottom right screen, keyboard works fine, but
  not the mouse.

  Windows Machine is the server and is placed in the right side, Ubuntu
  12.04 is the client, and is placed in the left side. I´ve tried
  uninstalling, rebooting, using different versions of synergy (1.4.10,
  1.4.18 and 1.5) all of them present the same bug.

  synergy logs show me this information when I move the cursor to the
  Ubuntu Machine:

  
  DEBUG1: try to leave ericom-T420 on right
  DEBUG1: no neighbor right
  DEBUG2: clamp to right of ericom-T420
  DEBUG2: clamp to bottom of ericom-T420
  DEBUG2: onMouseMoveSecondary +176,+101
  DEBUG2: find neighbor on right of ericom-T420
  DEBUG2: no neighbor on right of ericom-T420
  DEBUG1: try to leave ericom-T420 on right

  (ericom-T420 is the Ubuntu Machine)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1340272/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402214] [NEW] Buttons do not respond in Ubuntu

2014-12-13 Thread Jeb E.

Public bug reported:

Buttons fail to respond to the click on a mouse in Ubuntu for AMD64.

ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: gwibber 3.7.0bzr13.04.05-0ubuntu1
ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4
Uname: Linux 3.16.0-24-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
CurrentDesktop: Unity
Date: Sat Dec 13 10:08:41 2014
InstallationDate: Installed on 2014-11-08 (35 days ago)
InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
PackageArchitecture: all
ProcEnviron:
 LANGUAGE=en_US
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=set
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: gwibber
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: gwibber (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug utopic

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gwibber in Ubuntu.
https://bugs.launchpad.net/bugs/1402214

Title:
  Buttons do not respond in Ubuntu

Status in gwibber package in Ubuntu:
  New

Bug description:
  Buttons fail to respond to the click on a mouse in Ubuntu for AMD64.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: gwibber 3.7.0bzr13.04.05-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4
  Uname: Linux 3.16.0-24-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Sat Dec 13 10:08:41 2014
  InstallationDate: Installed on 2014-11-08 (35 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: gwibber
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gwibber/+bug/1402214/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402215] [NEW] App needs to be antialiased

2014-12-13 Thread Jeb E.

Public bug reported:

Icons, buttons, and other artifacts of the desktop version of the app
need to be antialiased

ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: gwibber 3.7.0bzr13.04.05-0ubuntu1
ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4
Uname: Linux 3.16.0-24-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
CurrentDesktop: Unity
Date: Sat Dec 13 10:10:27 2014
InstallationDate: Installed on 2014-11-08 (35 days ago)
InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
PackageArchitecture: all
ProcEnviron:
 LANGUAGE=en_US
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=set
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: gwibber
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: gwibber (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug utopic

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gwibber in Ubuntu.
https://bugs.launchpad.net/bugs/1402215

Title:
  App needs to be antialiased

Status in gwibber package in Ubuntu:
  New

Bug description:
  Icons, buttons, and other artifacts of the desktop version of the app
  need to be antialiased

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: gwibber 3.7.0bzr13.04.05-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4
  Uname: Linux 3.16.0-24-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Sat Dec 13 10:10:27 2014
  InstallationDate: Installed on 2014-11-08 (35 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: gwibber
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gwibber/+bug/1402215/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1284308] Re: Can't copy files from a bluetooth device: Another operation in progress

2014-12-13 Thread Dylan Coakley

Bug still here in 14.04. This is just ridiculous. I can't transfer with
a cable because MTP doesn't work and now bluetooth transfer doesn't work
either.

When is a fix being released??

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/1284308

Title:
  Can't copy files from a bluetooth device: Another operation in
  progress

Status in GVFS:
  New
Status in gvfs package in Ubuntu:
  Triaged

Bug description:
  1)  lsb_release -rd
  Description:  Ubuntu 14.04.1 LTS
  Release:  14.04

  2) apt-cache policy gvfs
  gvfs:
    Installed: 1.20.1-1ubuntu1
    Candidate: 1.20.1-1ubuntu1
    Version table:
   *** 1.20.1-1ubuntu1 0
  500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages
  100 /var/lib/dpkg/status

  3) What is expected to happen is when one pairs their bluetooth phone,
  browses it, and attempt to copy a file from the phone to Ubuntu, it
  does so successfully.

  4) What happens instead is a window pops up noting:
  Error while copying “example.txt”.
  There was an error copying the file into /home/test/
  Show more details
  Another operation in progress

  Originally reproduced in 13.10.

  /usr/lib/gvfs/gvfsd-obexftp 'host=[XX:XX:XX:XX:XX:XX]'
  ** Message: transfer of example.txt to /tmp/gvfsobexftp-tmp-NTNMQX started
  ** Message: filename: /Internal storage/Download/example.txt (example.txt) 
copying to /tmp/gvfsobexftp-tmp-NTNMQX (retval 2)
  ** Message: ChangeCurrentFolderToRoot failed
  ** Message: transfer got cancelled
  ** Message: ChangeCurrentFolderToRoot failed

  WORKAROUND: Connect phone via USB cord to transfer files from the
  phone to Ubuntu.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: bluetooth (not installed)
  ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3
  Uname: Linux 3.11.0-17-generic x86_64
  ApportVersion: 2.12.5-0ubuntu2.2
  Architecture: amd64
  Date: Mon Feb 24 21:24:05 2014
  InstallationDate: Installed on 2013-10-11 (136 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  InterestingModules: bnep rfcomm btusb bluetooth
  MachineType: Acer Aspire V3-571G
  MarkForUpload: True
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic 
root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7
  SourcePackage: bluez
  UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago)
  dmi.bios.date: 10/15/2012
  dmi.bios.vendor: Acer
  dmi.bios.version: V2.07
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: VA50_HC_CR
  dmi.board.vendor: Acer
  dmi.board.version: Type2 - Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V2.07
  dmi.modalias: 
dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07:
  dmi.product.name: Aspire V3-571G
  dmi.product.version: V2.07
  dmi.sys.vendor: Acer
  hciconfig:
   hci0:Type: BR/EDR  Bus: USB
    BD Address: A4:17:31:0D:4A:70  ACL MTU: 1022:8  SCO MTU: 183:5
    UP RUNNING PSCAN ISCAN
    RX bytes:44318 acl:198 sco:0 events:355 errors:0
    TX bytes:6132 acl:178 sco:0 commands:82 errors:0

To manage notifications about this bug go to:
https://bugs.launchpad.net/gvfs/+bug/1284308/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1363680] Re: My popup gwibber is too small What do I do?

2014-12-13 Thread Adolfo Jayme

*** This bug is a duplicate of bug 1363679 ***
https://bugs.launchpad.net/bugs/1363679

** This bug has been marked a duplicate of bug 1363679
   My popup gwibber is too small What do I do?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gwibber in Ubuntu.
https://bugs.launchpad.net/bugs/1363680

Title:
  My popup gwibber is too small What do I do?

Status in gwibber package in Ubuntu:
  New

Bug description:
  Every time I try to connect to my facebook account I get an error
  Your Popup is too small please broaden to continue

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gwibber/+bug/1363680/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1364630] Re: init: Error while reading from descriptor: Broken pipe

2014-12-13 Thread rik

this started 12-13-2014 after Ubuntu 14.10 regular system update which also 
incorporated nvidia update.
i now have a black screen and  broken pipe !

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-304 in Ubuntu.
https://bugs.launchpad.net/bugs/1364630

Title:
  init: Error while reading from descriptor: Broken pipe

Status in Upstart:
  New
Status in nvidia-graphics-drivers-304 package in Ubuntu:
  Confirmed

Bug description:
  [   16.934379] init: Error while reading from descriptor: Broken pipe

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: init 1.20ubuntu3
  ProcVersionSignature: Ubuntu 3.16.0-11.16-generic 3.16.1
  Uname: Linux 3.16.0-11-generic x86_64
  ApportVersion: 2.14.7-0ubuntu1
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Tue Sep  2 17:23:15 2014
  InstallationDate: Installed on 2014-04-27 (128 days ago)
  InstallationMedia: Ubuntu-GNOME 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  SourcePackage: init-system-helpers
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/upstart/+bug/1364630/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402194] Re: PCI/internal sound card not detected

2014-12-13 Thread Raymond

Default sink name: alsa_output.pci-_00_03.0.hdmi-stereo
Default source name: alsa_output.pci-_00_03.0.hdmi-stereo.monitor


it was because  hdmi was selected by pulseaudio as default sink

** Changed in: alsa-driver (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1402194

Title:
  PCI/internal sound card not detected

Status in alsa-driver package in Ubuntu:
  Incomplete

Bug description:
  This bug relates to the internal sound hardware in a Dell XPS 13
  laptop. Since accepting an upgrade to the latest Ubuntu Extra software
  today, the Systems Settings  Sound  Output no longer show the
  internal speakers, despite numerous attempts to shut down and restart.

  Before accepting the upgrade, the sound played normally through the
  speakers.

  Having upgraded the system from the Ubuntu 12.10 originally installed
  with the laptop and finding comments relating to the software drivers
  for the Intel WiFi and Bluetooth chip (Intel AC 7520) and touch
  screen, I tried out an installation straight from a Ubuntu 14.04
  bootable USB stick. The system worked well enough without these
  drivers so I went ahead and replaced the whole installation from the
  USB stick and subsequently accepted the upgrade to 14.10.

  I tried plugging in a headset and this produced a screen allowing me
  to select the type of headset (mono, with or without mic or stereo).
  An extra entry appeared in the System Settings  Sound  Output pane
  allowing me to choose between the headset or the speakers and to test
  the audio on each one. However, unplugging the headset seemed to
  produce intermittent behaviour, the system being uncertain as to
  whether the headset was in use. This was solved by re-booting and the
  system and speakers behaved as expected.

  Now I have the situation that the speakers are not shown in the Sound
   Output pane and the Output Volume slider stays at zero and is unable
  to be moved with the pointer. The volume control slider in the
  dropdown panel from the speaker symbol in the system tray appears to
  respond to movement from the pointer and the Fn-F11  F12 keys.
  However, with no output device shown, there is no sound output to the
  speakers.

  Several attempts to restart the system have failed to restore the
  speaker functionality.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1
  Uname: Linux 3.16.0-28-generic x86_64
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  david  2172 F pulseaudio
  CurrentDesktop: Unity
  Date: Sat Dec 13 13:28:32 2014
  InstallationDate: Installed on 2014-12-11 (1 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS Trusty Tahr - Release amd64 
(20140722.2)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=en_GB:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Title: PCI/internal sound card not detected
  UpgradeStatus: Upgraded to utopic on 2014-12-11 (1 days ago)
  dmi.bios.date: 09/11/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A05
  dmi.board.name: 0D13CR
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnDellInc.:bvrA05:bd09/11/2014:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0D13CR:rvrA00:cvnDellInc.:ct8:cvr0.1:
  dmi.product.name: XPS13 9333
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1402194/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402149] Re: After update lightdm doesn't start

2014-12-13 Thread Mirto Silvio Busico

Found an error in Xorg.0.log:
---
[28.605] (==) Log file: /var/log/Xorg.0.log, Time: Sat Dec 13 17:09:02 
2014
[28.605] (==) Using config file: /etc/X11/xorg.conf
[28.605] (==) Using system config directory /usr/share/X11/xorg.conf.d
[28.605] Data incomplete in file /etc/X11/xorg.conf
Undefined Screen nvidia referenced by ServerLayout layout.
[28.605] (EE) Problem parsing the config file
[28.605] (EE) Error parsing the config file
[28.605] (EE)
Fatal server error:
[28.605] (EE) no screens found(EE)
[28.605] (EE)
---

The xorg.conf file contains:
---
Section ServerLayout
Identifier layout
Screen 0 nvidia
Inactive intel
EndSection

Section Device
Identifier intel
Driver intel
BusID PCI:0@0:2:0
Option AccelMethod SNA
EndSection

Section Screen
Identifier intel
Device intel
EndSection
---

The last 2 automatically saved xorg.conf files have the same content

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1402149

Title:
  After update lightdm doesn't start

Status in lightdm package in Ubuntu:
  New

Bug description:
  Updateted 14 Dec 2014 Kubuntu 14.10 64Bit
  After reboot there is no gui.
  From dmesg I see an error in ligthdm

  This is the error reported:
  [   16.777309] init: lightdm main process (2534) terminated with status 1
  [   16.777317] init: lightdm main process ended, respawning
  [   22.866231] init: lightdm main process (2642) terminated with status 1
  [   22.866239] init: lightdm main process ended, respawning
  [   23.742651] systemd-logind[981]: Failed to start unit user@1000.service: 
Unknown unit: user@1000.service
  [   23.742688] systemd-logind[981]: Failed to start user service: Unknown 
unit: user@1000.service
  [   23.745586] systemd-logind[981]: New session c1 of user mirto.
  [   28.947789] init: lightdm main process (2895) terminated with status 1
  [   28.947797] init: lightdm respawning too fast, stopped
  [   28.951276] init: plymouth-ready (startup) main process (264) terminated 
with status 1
  [   33.762569] audit_printk_skb: 57 callbacks suppressed

  Trier another update this morning but nothing chenged

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: lightdm 1.12.2-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1
  Uname: Linux 3.16.0-28-generic x86_64
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  Date: Sat Dec 13 07:50:08 2014
  InstallationDate: Installed on 2014-11-24 (18 days ago)
  InstallationMedia: Kubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  LightdmGreeterLog:
   QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: File o 
directory non esistente
   QFileSystemWatcher: failed to add paths: /var/lib/lightdm/.config/ibus/bus
   Bus::open: Can not get ibus-daemon's address. 
   IBusInputContext::createInputContext: no connection to ibus-daemon
  LightdmGreeterLogOld:
   QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: File o 
directory non esistente
   QFileSystemWatcher: failed to add paths: /var/lib/lightdm/.config/ibus/bus
   Bus::open: Can not get ibus-daemon's address. 
   IBusInputContext::createInputContext: no connection to ibus-daemon
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  SourcePackage: lightdm
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1402149/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402052] Re: [USB-Audio - PnP Audio Device, playback] Background noise or low volume

2014-12-13 Thread Raymond

post output of

aplay -D hw:1,0 --dump-hw-params any.wav

pulseaudio drop support of multichannel volume control


http://cgit.freedesktop.org/pulseaudio/pulseaudio/commit/src/modules/alsa/alsa-mixer.c?id=527078523815587bfd021bc1d10782403e9b3e84



Simple mixer control 'Speaker',0
  Capabilities: pvolume pswitch pswitch-joined penum
  Playback channels: Front Left - Front Right - Rear Left - Rear Right - Front 
Center - Woofer - Side Left - Side Right
  Limits: Playback 0 - 197
  Mono:
  Front Left: Playback 90 [46%] [-20.06dB] [on]
  Front Right: Playback 90 [46%] [-20.06dB] [on]
  Rear Left: Playback 90 [46%] [-20.06dB] [on]
  Rear Right: Playback 90 [46%] [-20.06dB] [on]
  Front Center: Playback 90 [46%] [-20.06dB] [on]
  Woofer: Playback 90 [46%] [-20.06dB] [on]
  Side Left: Playback 90 [46%] [-20.06dB] [on]
  Side Right: Playback 90 [46%] [-20.06dB] [on]

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1402052

Title:
  [USB-Audio - PnP Audio Device, playback] Background noise or low
  volume

Status in alsa-driver package in Ubuntu:
  New

Bug description:
  I hear noise only. Tried changing audio configuration. Worked ok
  before.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.2.0-74.109-generic-pae 3.2.64
  Uname: Linux 3.2.0-74-generic-pae i686
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  AplayDevices:
    List of PLAYBACK Hardware Devices 
   card 1: Device [PnP Audio Device], device 0: USB Audio [USB Audio]
     Subdevices: 1/1
     Subdevice #0: subdevice #0
  ApportVersion: 2.0.1-0ubuntu17.8
  Architecture: i386
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 1: Device [PnP Audio Device], device 0: USB Audio [USB Audio]
     Subdevices: 1/1
     Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  bringout   2189 F pulseaudio
  Card1.Amixer.info:
   Card hw:1 'Device'/'PnP Audio Device at usb-:00:02.0-7, full speed'
     Mixer name : 'USB Mixer'
     Components : 'USB0d8c:0201'
     Controls  : 17
     Simple ctrls  : 6
  Date: Fri Dec 12 21:38:49 2014
  MarkForUpload: True
  PackageArchitecture: all
  PciMultimedia:

  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   LANG=bs_BA.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Device failed
  Symptom_Card: CM6501 - PnP Audio Device
  Symptom_Type: High background noise, or volume is too low
  Title: [USB-Audio - PnP Audio Device, playback] Background noise or low volume
  UpgradeStatus: Upgraded to precise on 2013-09-24 (443 days ago)
  dmi.bios.date: 04/22/2010
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: ASUS M2N SLI ACPI BIOS Revision 1103
  dmi.board.name: M2N-SLI
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: 1.XX
  dmi.chassis.asset.tag: 123456789000
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvrASUSM2NSLIACPIBIOSRevision1103:bd04/22/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM2N-SLI:rvr1.XX:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1402052/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402149] Re: After update lightdm doesn't start

2014-12-13 Thread Mirto Silvio Busico

ATTENTION: workaround found.

The problem is an xorg.conf corrupted file created automatically.

To use X you have to:

1) boot the system (you have only the command line)
2) remove the file /etc/X11/xorg.conf
3) issue the command sudo startx

Noe the GUI works; but you have to do this everytime you reboot

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1402149

Title:
  After update lightdm doesn't start

Status in lightdm package in Ubuntu:
  New

Bug description:
  Updateted 14 Dec 2014 Kubuntu 14.10 64Bit
  After reboot there is no gui.
  From dmesg I see an error in ligthdm

  This is the error reported:
  [   16.777309] init: lightdm main process (2534) terminated with status 1
  [   16.777317] init: lightdm main process ended, respawning
  [   22.866231] init: lightdm main process (2642) terminated with status 1
  [   22.866239] init: lightdm main process ended, respawning
  [   23.742651] systemd-logind[981]: Failed to start unit user@1000.service: 
Unknown unit: user@1000.service
  [   23.742688] systemd-logind[981]: Failed to start user service: Unknown 
unit: user@1000.service
  [   23.745586] systemd-logind[981]: New session c1 of user mirto.
  [   28.947789] init: lightdm main process (2895) terminated with status 1
  [   28.947797] init: lightdm respawning too fast, stopped
  [   28.951276] init: plymouth-ready (startup) main process (264) terminated 
with status 1
  [   33.762569] audit_printk_skb: 57 callbacks suppressed

  Trier another update this morning but nothing chenged

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: lightdm 1.12.2-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1
  Uname: Linux 3.16.0-28-generic x86_64
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  Date: Sat Dec 13 07:50:08 2014
  InstallationDate: Installed on 2014-11-24 (18 days ago)
  InstallationMedia: Kubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  LightdmGreeterLog:
   QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: File o 
directory non esistente
   QFileSystemWatcher: failed to add paths: /var/lib/lightdm/.config/ibus/bus
   Bus::open: Can not get ibus-daemon's address. 
   IBusInputContext::createInputContext: no connection to ibus-daemon
  LightdmGreeterLogOld:
   QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: File o 
directory non esistente
   QFileSystemWatcher: failed to add paths: /var/lib/lightdm/.config/ibus/bus
   Bus::open: Can not get ibus-daemon's address. 
   IBusInputContext::createInputContext: no connection to ibus-daemon
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=it_IT.UTF-8
   SHELL=/bin/bash
  SourcePackage: lightdm
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1402149/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401355] Re: package nvidia-opencl-icd-331-updates (not installed) failed to install/upgrade: trying to overwrite '/usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113', which i

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: nvidia-graphics-drivers-331-updates (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331-updates in
Ubuntu.
https://bugs.launchpad.net/bugs/1401355

Title:
  package nvidia-opencl-icd-331-updates (not installed) failed to
  install/upgrade: trying to overwrite '/usr/lib/i386-linux-gnu
  /libnvidia-opencl.so.331.113', which is also in package nvidia-opencl-
  icd-331 331.113-0ubuntu0.0.4

Status in nvidia-graphics-drivers-331-updates package in Ubuntu:
  Confirmed

Bug description:
  There was an update of the driver this morning; since then I have been
  having difficulties with my CUDA code. I tried installing this
  alternative driver from the Additional Drivers manager, but the
  installation encountered this problem.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-opencl-icd-331-updates (not installed)
  ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
  Uname: Linux 3.13.0-40-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  Date: Thu Dec 11 11:31:01 2014
  DuplicateSignature: package:nvidia-opencl-icd-331-updates:(not 
installed):trying to overwrite 
'/usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113', which is also in package 
nvidia-opencl-icd-331 331.113-0ubuntu0.0.4
  ErrorMessage: trying to overwrite 
'/usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113', which is also in package 
nvidia-opencl-icd-331 331.113-0ubuntu0.0.4
  InstallationDate: Installed on 2014-08-04 (128 days ago)
  InstallationMedia: Lubuntu 14.04 LTS Trusty Tahr - Release amd64 
(20140416.2)
  SourcePackage: nvidia-graphics-drivers-331-updates
  Title: package nvidia-opencl-icd-331-updates (not installed) failed to 
install/upgrade: trying to overwrite 
'/usr/lib/i386-linux-gnu/libnvidia-opencl.so.331.113', which is also in package 
nvidia-opencl-icd-331 331.113-0ubuntu0.0.4
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331-updates/+bug/1401355/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402248] [NEW] package libreoffice-calc 1:4.2.7-0ubuntu1 failed to install/upgrade: cannot copy extracted data for './usr/lib/libreoffice/program/libscopencllo.so' to '/usr/lib

2014-12-13 Thread Bill Kotrotsos

Public bug reported:

I was trying to update

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: libreoffice-calc 1:4.2.7-0ubuntu1
ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
Uname: Linux 3.13.0-40-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
Date: Sat Dec 13 19:47:19 2014
DuplicateSignature: package:libreoffice-calc:1:4.2.7-0ubuntu1:cannot copy 
extracted data for './usr/lib/libreoffice/program/libscopencllo.so' to 
'/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected end of 
file or stream
ErrorMessage: cannot copy extracted data for 
'./usr/lib/libreoffice/program/libscopencllo.so' to 
'/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected end of 
file or stream
InstallationDate: Installed on 2014-03-01 (286 days ago)
InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1)
SourcePackage: libreoffice
Title: package libreoffice-calc 1:4.2.7-0ubuntu1 failed to install/upgrade: 
cannot copy extracted data for './usr/lib/libreoffice/program/libscopencllo.so' 
to '/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected end of 
file or stream
UpgradeStatus: Upgraded to trusty on 2014-04-18 (239 days ago)

** Affects: libreoffice (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1402248

Title:
  package libreoffice-calc 1:4.2.7-0ubuntu1 failed to install/upgrade:
  cannot copy extracted data for
  './usr/lib/libreoffice/program/libscopencllo.so' to
  '/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected
  end of file or stream

Status in libreoffice package in Ubuntu:
  New

Bug description:
  I was trying to update

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: libreoffice-calc 1:4.2.7-0ubuntu1
  ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
  Uname: Linux 3.13.0-40-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  Date: Sat Dec 13 19:47:19 2014
  DuplicateSignature: package:libreoffice-calc:1:4.2.7-0ubuntu1:cannot copy 
extracted data for './usr/lib/libreoffice/program/libscopencllo.so' to 
'/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected end of 
file or stream
  ErrorMessage: cannot copy extracted data for 
'./usr/lib/libreoffice/program/libscopencllo.so' to 
'/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected end of 
file or stream
  InstallationDate: Installed on 2014-03-01 (286 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 
(20131016.1)
  SourcePackage: libreoffice
  Title: package libreoffice-calc 1:4.2.7-0ubuntu1 failed to install/upgrade: 
cannot copy extracted data for './usr/lib/libreoffice/program/libscopencllo.so' 
to '/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected end of 
file or stream
  UpgradeStatus: Upgraded to trusty on 2014-04-18 (239 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1402248/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402248] Re: package libreoffice-calc 1:4.2.7-0ubuntu1 failed to install/upgrade: cannot copy extracted data for './usr/lib/libreoffice/program/libscopencllo.so' to '/usr/lib/l

2014-12-13 Thread Apport retracing service

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1402248

Title:
  package libreoffice-calc 1:4.2.7-0ubuntu1 failed to install/upgrade:
  cannot copy extracted data for
  './usr/lib/libreoffice/program/libscopencllo.so' to
  '/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected
  end of file or stream

Status in libreoffice package in Ubuntu:
  New

Bug description:
  I was trying to update

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: libreoffice-calc 1:4.2.7-0ubuntu1
  ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
  Uname: Linux 3.13.0-40-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  Date: Sat Dec 13 19:47:19 2014
  DuplicateSignature: package:libreoffice-calc:1:4.2.7-0ubuntu1:cannot copy 
extracted data for './usr/lib/libreoffice/program/libscopencllo.so' to 
'/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected end of 
file or stream
  ErrorMessage: cannot copy extracted data for 
'./usr/lib/libreoffice/program/libscopencllo.so' to 
'/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected end of 
file or stream
  InstallationDate: Installed on 2014-03-01 (286 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 
(20131016.1)
  SourcePackage: libreoffice
  Title: package libreoffice-calc 1:4.2.7-0ubuntu1 failed to install/upgrade: 
cannot copy extracted data for './usr/lib/libreoffice/program/libscopencllo.so' 
to '/usr/lib/libreoffice/program/libscopencllo.so.dpkg-new': unexpected end of 
file or stream
  UpgradeStatus: Upgraded to trusty on 2014-04-18 (239 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1402248/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401350] Re: package nvidia-opencl-icd-331 (not installed) failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/libnvidia-opencl.so.331.113', which is also

2014-12-13 Thread David Anderson

Installed latest 14.04 update (incl kernel) and now CUDA no longer works. 
Linux Dseti3 3.13.0-43-generic #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 2014 
x86_64 x86_64 x86_64 GNU/Linux

Nvidia listed is 331.113.  boinc cannot see GPUs to do CUDA work.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1401350

Title:
  package nvidia-opencl-icd-331 (not installed) failed to
  install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu
  /libnvidia-opencl.so.331.113', which is also in package nvidia-opencl-
  icd-331-updates 331.113-0ubuntu0.0.4

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  Confirmed

Bug description:
  I had installed the following 2 things from nvidia's website:

  1) The driver NVIDIA-Linux-x86_64-343.36.run

  2) cuda_6.5.19_linux_64.run (skipping the driver)

  
  I have a new computer with a GTX 980 and I haven't been able to run anything 
with CUDA yet. Installing `nvidia-331' was a somewhat desperate attempt to get 
the CUDA samples to run.

  In any case, dpkg should probably not bomb, no matter how misguided my
  attempts are.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-opencl-icd-331 (not installed)
  ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
  Uname: Linux 3.13.0-40-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  Date: Wed Dec 10 20:54:53 2014
  DuplicateSignature: package:nvidia-opencl-icd-331:(not installed):trying to 
overwrite '/usr/lib/x86_64-linux-gnu/libnvidia-opencl.so.331.113', which is 
also in package nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  ErrorMessage: trying to overwrite 
'/usr/lib/x86_64-linux-gnu/libnvidia-opencl.so.331.113', which is also in 
package nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  InstallationDate: Installed on 2014-12-10 (0 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  SourcePackage: nvidia-graphics-drivers-331
  Title: package nvidia-opencl-icd-331 (not installed) failed to 
install/upgrade: trying to overwrite 
'/usr/lib/x86_64-linux-gnu/libnvidia-opencl.so.331.113', which is also in 
package nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1401350/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401350] Re: package nvidia-opencl-icd-331 (not installed) failed to install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu/libnvidia-opencl.so.331.113', which is also

2014-12-13 Thread David Anderson

More on CUDA/nvidia: installed 14.04 21 July. Driver then was 331.28 according 
to my notes
at the time.

CUDA continued to work through at least 5 kernel updates since then.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1401350

Title:
  package nvidia-opencl-icd-331 (not installed) failed to
  install/upgrade: trying to overwrite '/usr/lib/x86_64-linux-gnu
  /libnvidia-opencl.so.331.113', which is also in package nvidia-opencl-
  icd-331-updates 331.113-0ubuntu0.0.4

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  Confirmed

Bug description:
  I had installed the following 2 things from nvidia's website:

  1) The driver NVIDIA-Linux-x86_64-343.36.run

  2) cuda_6.5.19_linux_64.run (skipping the driver)

  
  I have a new computer with a GTX 980 and I haven't been able to run anything 
with CUDA yet. Installing `nvidia-331' was a somewhat desperate attempt to get 
the CUDA samples to run.

  In any case, dpkg should probably not bomb, no matter how misguided my
  attempts are.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-opencl-icd-331 (not installed)
  ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
  Uname: Linux 3.13.0-40-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  Date: Wed Dec 10 20:54:53 2014
  DuplicateSignature: package:nvidia-opencl-icd-331:(not installed):trying to 
overwrite '/usr/lib/x86_64-linux-gnu/libnvidia-opencl.so.331.113', which is 
also in package nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  ErrorMessage: trying to overwrite 
'/usr/lib/x86_64-linux-gnu/libnvidia-opencl.so.331.113', which is also in 
package nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  InstallationDate: Installed on 2014-12-10 (0 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  SourcePackage: nvidia-graphics-drivers-331
  Title: package nvidia-opencl-icd-331 (not installed) failed to 
install/upgrade: trying to overwrite 
'/usr/lib/x86_64-linux-gnu/libnvidia-opencl.so.331.113', which is also in 
package nvidia-opencl-icd-331-updates 331.113-0ubuntu0.0.4
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1401350/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1382462] Re: Desktop/windows painted incorrectly in dual monitor configuration

2014-12-13 Thread Morten Hundevad

do anyone know of a unofficial fix ? =//

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1382462

Title:
  Desktop/windows painted incorrectly in dual monitor configuration

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  My setup: Dell M4600 laptop with Dell U3011 2560x1600 monitor attached
  to DisplayPort.

  I was using Nvidia 331.38 prioprietary driver for quite a long time
  with Ubuntu 14.04 LTS and everything worked perfectly. Today I
  upgraded to Ubuntu 14.10, which comes with Nvidia 331.89 and observed
  the following problem:

  1. When I boot up the computer with the monitor connected, the login
  screen looks fine. Both displays get detected properly and resolutions
  are ok (1920x1080 on the builtin laptop display and 2560x1600 on
  U3011) and screen contents scaled properly.

  2. Then I log into my account, for 3 seconds U3011 displays some
  rubbish (but it was always like that) and when it finally logs in, it
  displays everything stretched horizontally through both my screens. It
  looks as if it tried to paint the contents of a single display on two
  of them, by stretching the content horizontally, so everything (icons,
  windows, wallpaper) has wrong aspect-ratio. Funny, the top status bar
  seem to render correctly and the resolution/size of the top menu is
  correct. Physical resolution of both screens is ok. I'll attach a
  photo, because it is hard to describe how it looks.

  3. I cannot use system in this state - mouse click position seems to
  not be synchronized with what's on the display - e.g. I can start
  applications, but then they don't react to mouseclicks.

  However: booting up without the second display connected, logging in
  and *then* connecting the second display works fine.

  If I boot up with connected monitor and log in (desktop distorted), 
disconnecting and connecting monitor does *not* help. After disconnecting the 
U3011, the builtin display is painted ok, but after connecting, it returns back 
to the incorrect state and both are rendered incorrectly.
  The only thing that helps recovering from this state seems to be 
disconnecting the second monitor, reboot, logging in and then connecting.

  Suspending to memory and waking up does not change the layout of the
  screen (neither fixes the broken one nor destroys the good one).

  Using a Guest session instead of my account does not fix my problem (I
  was hoping this was something screwed up in my .config).

  Switching to a Guest user account while I'm using both monitors in the
  good layout creates a session with a broken layout. Then logging out
  from Guest and switching back to my original session restores the good
  layout. The good layout seems to not be forgotten until I finish the
  session and logout. The bad layout is created whenever I start a new
  session with both monitors plugged in.

  BTW: I'm using a docking station - not sure if it is related - if you
  think it might be, I can try with connecting the monitor directly.

  I tried deleting ~/.compiz and ~/.config/compiz-1 directories but the problem 
remains.
  I also tried to go into the Displays configuration when everything is ok, 
apply the settings there (without any changes) in hope it will persist them 
somehow, but after restart it is broken again.

  I also tried reinstalling nvidia 331.89 drivers, because it complained
  about not being able to install nvidia-uvm during the upgrade process
  (reported separately), and now all nvidia packages installed cleanly.
  Before that I also got rid of all the ppa mainline kernels I had, just
  in case they mess something up.

  I remember the same problem happened on Ubuntu 14.04 when I tried to
  upgrade nvidia from ppa/xorg-edgers to 331.89, but then the easy
  workaround was to downgrade back to official 331.38. Now I have no
  choice :(

  Some other observations that may or may not be related to the problem,
  but I disclose them anyway, maybe they are helpful:

  * Notifications (e.g. network connection) displayed on the login
  screen in dual screen mode seem to be misplaced and instead of being
  painted in the upper right corner of one of the displays they get
  painted in some hard to logically explain position - neither at the
  center, nor in any corner.

  * The splash screen of IntelliJ IDEA (this is using Java / AWT
  probably) is also rendered in a strange position - below the center of
  the laptop screen, moved to the right (but not touching the edge),
  instead of exact center as it should be.

  * GMail notification just displayed at the moment when I'm writing it
  exactly at the left-lower corner of the bigger screen (U3011).

  * Nvidia settings lists only U3011 in the list of the devices
  (attached screenshot).

  * Ubuntu Display configuration dialog detects both displays correctly
  and their positions and resolutions are ok

[Desktop-packages] [Bug 1322925] Re: Copy, paste stops working randomly in Ubuntu 14.04 nautilus

2014-12-13 Thread Lance Hankins

please mark this as high priority - its maddening... happens to me
several times a day

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1322925

Title:
  Copy, paste stops working randomly in Ubuntu 14.04 nautilus

Status in nautilus package in Ubuntu:
  Confirmed

Bug description:
  The title says it.

  Since upgrade to 14.04, copy / cut / paste of files among various
  folders I have write rights on does not work most of the times.

  Using the terminal to copy / move does work normally.

  nautilus:
    Installed: 1:3.10.1-0ubuntu9.1
    Candidate: 1:3.10.1-0ubuntu9.1
    Version table:
   *** 1:3.10.1-0ubuntu9.1 0
  500 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/main i386 
Packages
  100 /var/lib/dpkg/status
   1:3.10.1-0ubuntu8 0
  500 http://de.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages

  
  WORKAROUND:

  When the bug appears, you can close all instances of nautilus to restore 
normal behavior.
  Command line: killall nautilus

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1322925/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1389858] Re: Libreoffice calc 4.2.7-0ubuntu1 not updating references after sort

2014-12-13 Thread Luke

@Manuel Iglesias Alonso

Please refer to:
http://www.dummies.com/how-to/content/looking-up-data-in-excel-2007-with-hlookup-and-vlo.navId-323123.html

Your attached document is designed wrong. This is a classic mistake made
by people who don't understand how spreadsheets function. If you sort it
with Google Sheets, Excel, Open Office Calc, LO Calc 4.2.8, Gnumeric, or
WPS sheets they will all produce the same, correct results. Why?  You
used references when you should be using a table lookup function.


If we change the default sorting behavior to fix your broken spreadsheet, all 
spreadsheets through out the history of spreadsheets software would be 
incompatible with Libreoffice's sorting routine. You can have your broken 
sorting behavior by changing the option UpdateRef=TRUE. But be warned: your 
spreadsheet will NOT sort correctly on any other spreadsheet software, include 
libreoffice with default settings. A much better solution is to design your 
spreadsheets correctly by using a lookup function.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1389858

Title:
  Libreoffice calc 4.2.7-0ubuntu1 not updating references after sort

Status in LibreOffice Productivity Suite:
  Unknown
Status in libreoffice package in Ubuntu:
  Fix Released
Status in libreoffice source package in Trusty:
  Fix Released

Bug description:
  Update to LibreOffice 4.2.7 is causing incorrect sort behaviour in
  Calc.

  As initially reported here:

  
http://www.reddit.com/r/Ubuntu/comments/2le7qu/libreoffice_calc_update_a_few_hours_ago_is_buggy/

  Attached is sample Calc document. To reproduce, highlight B6 to E14,
  select Sort and sort by Column D, see that column E didn't get sorted.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: libreoffice (not installed)
  ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4
  Uname: Linux 3.16.0-24-generic x86_64
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Nov  5 15:49:03 2014
  InstallationDate: Installed on 2013-11-26 (344 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 
(20131016.1)
  SourcePackage: libreoffice
  UpgradeStatus: Upgraded to utopic on 2014-10-08 (27 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/df-libreoffice/+bug/1389858/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 628992] Re: Unicode blocks can no longer be sorted in Unicode order

2014-12-13 Thread Bug Watch Updater

** Changed in: gucharmap
   Status: New = Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gucharmap in Ubuntu.
https://bugs.launchpad.net/bugs/628992

Title:
  Unicode blocks can no longer be sorted in Unicode order

Status in GUCharMap - Unicode Font Viewer:
  Fix Released
Status in gucharmap package in Ubuntu:
  Triaged

Bug description:
  Binary package hint: gucharmap

  Ubuntu version: Ubuntu 10.04.1 LTS
  Package version: 1:2.30.0-0ubuntu1
  What I expected to happen: Unicode blocks are sortable in Unicode order, like 
in previous versions.
  What happened instead: Unicode blocks are only sortable alphabetically.

  Up until 1:2.28.0-0ubuntu1, all the versions of gucharmap I've used
  have displayed the blocks in Unicode order, but when I upgraded to
  1:2.30.0-0ubuntu1 it now only sorts them alphabetically. This seems to
  be the opposite of bug #479330.

  I found the old behaviour very useful because related blocks are
  generally grouped together (e.g. hiragana and katakana are next to
  each other, the Indian scripts are together, ...). After all, if I'm
  viewing by blocks, I'm probably quite interested in the actual Unicode
  structure, because I can just use view by script if I don't care about
  that.

  Perhaps it could be split into two separate options, so that there's view by 
script, view by Unicode block (alphabetical) (new behaviour) and view by 
Unicode block (Unicode order) (old behaviour).
  To make it clearer that the Unicode order one is ordered by the position in 
Unicode, it could maybe even include the first codepoint in the name (something 
like U+ Basic Latin followed by U+0080 Latin-1 Supplement followed by 
U+0100 Latin Extended-A, etc).

To manage notifications about this bug go to:
https://bugs.launchpad.net/gucharmap/+bug/628992/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 241781] Re: hp photosmart 7450 communication problems.

dino99, thank you for your comment. So your hardware and problem may be 
tracked, could you please file a new report by executing the following in a 
terminal:
ubuntu-bug cups

For more on this, please see the official Ubuntu documentation:
Ubuntu Bug Control, and Ubuntu Bug Squad: 
https://wiki.ubuntu.com/Bugs/BestPractices#X.2BAC8-Reporting.Focus_on_One_Issue
Ubuntu Community: 
https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette

When opening up the new report, please feel free to subscribe me to it.

As well, please do not announce in this report you created a new bug
report.

Thank you for your understanding.

** Tags removed: utopic vivid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to hplip in Ubuntu.
https://bugs.launchpad.net/bugs/241781

Title:
  hp photosmart 7450 communication problems.

Status in HP Linux Imaging and Printing:
  New
Status in hplip package in Ubuntu:
  Incomplete

Bug description:
  My HP photosmart 7450 printer has been showing some communication problems 
since using Hardy.  Prior to this, I've been running Debian stable on exactly 
the same hardware without any printer problems.  The symptoms are:
  printer is detected as photosmart 7400  appears to install correctly.  I can 
sometimes initially print one or two pages, then it locks up completely, I get 
a pop-up notice on the top panel about printer supplies low (although it 
isn't).  At this point, the printer firmware appears to have hung - it doesn't 
respond to front-panel button presses  the only way to get it to respond is to 
pull the power supply for a few seconds.  On reconnecting, it sometimes prints, 
sometimes doesn't.  
  I've tried uninstalling the hplip package and installing the latest version 
(2.8.5) from the hp website.  It didn't make any difference, the symptoms are 
unchanged.  

  It looks like there's another user with the same problem:
  http://ubuntuforums.org/showthread.php?t=809469highlight=photosmart+7450 

  Following the advice from the debugging printer problems page:
  mike@badger:~$ lsmod |grep usb
  usb_storage73664  0 
  libusual   19108  1 usb_storage
  usblp  15872  0 
  usbhid 31872  0 
  hid38784  1 usbhid
  usbcore   146028  8 
usb_storage,libusual,usblp,usbhid,ehci_hcd,uhci_hcd
  scsi_mod  151436  5 usb_storage,sg,sr_mod,sd_mod,libata

  mike@badger:~$ tail -f /var/log/messages
  Jun 20 20:24:37 badger kernel: [  476.217222] scsi 2:0:0:0: [sdb] Sense not 
available.
  Jun 20 20:24:37 badger kernel: [  476.217230] scsi 2:0:0:0: [sdb] Write 
Protect is off
  Jun 20 20:24:37 badger kernel: [  476.324885] usb 4-1: new full speed USB 
device using uhci_hcd and address 3
  Jun 20 20:24:38 badger kernel: [  476.888758] usb 4-1: new full speed USB 
device using uhci_hcd and address 4
  Jun 20 20:24:39 badger kernel: [  477.456648] usb 4-1: new full speed USB 
device using uhci_hcd and address 5
  Jun 20 20:24:39 badger kernel: [  477.976533] usb 4-1: new full speed USB 
device using uhci_hcd and address 6
  Jun 20 20:37:20 badger -- MARK --
  Jun 20 20:57:20 badger -- MARK --
  Jun 20 21:17:20 badger -- MARK --
  Jun 20 21:37:20 badger -- MARK --
  Jun 20 21:41:19 badger kernel: [ 5077.147105] usb 4-1: new full speed USB 
device using uhci_hcd and address 7
  Jun 20 21:41:19 badger kernel: [ 5077.341241] usb 4-1: configuration #1 
chosen from 1 choice
  Jun 20 21:41:19 badger kernel: [ 5077.349158] usblp0: USB Bidirectional 
printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB802
  Jun 20 21:41:19 badger kernel: [ 5077.363071] scsi3 : SCSI emulation for USB 
Mass Storage devices
  Jun 20 21:41:24 badger kernel: [ 5082.381468] scsi 3:0:0:0: Direct-Access 
HP   Photosmart 7400  1.00 PQ: 0 ANSI: 2
  Jun 20 21:41:24 badger kernel: [ 5082.398537] sd 3:0:0:0: [sdb] Attached SCSI 
removable disk
  Jun 20 21:41:24 badger kernel: [ 5082.398592] sd 3:0:0:0: Attached scsi 
generic sg3 type 0
  Jun 20 21:57:20 badger -- MARK --
  Jun 20 22:17:20 badger -- MARK --
  Jun 20 22:37:20 badger -- MARK --

  mike@badger:~$ lpinfo -v
  network socket
  network beh
  direct hpfax
  direct 
hal:///org/freedesktop/Hal/devices/usb_device_3f0_b802_CN4B82V0WBUJ_if0_printer_CN4B82V0WBUJ
  direct usb://HP/Photosmart%207400%20series?serial=CN4B82V0WBUJ
  direct hp:/usb/Photosmart_7400_series?serial=CN4B82V0WBUJ
  network http
  network ipp
  network lpd
  direct parallel:/dev/lp0
  file cups-pdf:/
  direct scsi
  network smb
  mike@badger:~$

To manage notifications about this bug go to:
https://bugs.launchpad.net/hplip/+bug/241781/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1402268] [NEW] nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 hostname module failed to build

2014-12-13 Thread carlos huaman

Public bug reported:

muestra el anterior

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: nvidia-331 331.113-0ubuntu0.0.4
ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
Uname: Linux 3.13.0-37-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
DKMSKernelVersion: 3.13.0-43-generic
Date: Fri Dec 12 21:14:47 2014
InstallationDate: Installed on 2014-07-24 (141 days ago)
InstallationMedia: It
PackageVersion: 331.113-0ubuntu0.0.4
SourcePackage: nvidia-graphics-drivers-331
Title: nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 hostname module failed to 
build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: nvidia-graphics-drivers-331 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1402268

Title:
  nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 hostname module failed to
  build

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  New

Bug description:
  muestra el anterior

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-331 331.113-0ubuntu0.0.4
  ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
  Uname: Linux 3.13.0-37-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  DKMSKernelVersion: 3.13.0-43-generic
  Date: Fri Dec 12 21:14:47 2014
  InstallationDate: Installed on 2014-07-24 (141 days ago)
  InstallationMedia: It
  PackageVersion: 331.113-0ubuntu0.0.4
  SourcePackage: nvidia-graphics-drivers-331
  Title: nvidia-331 331.113-0ubuntu0.0.4: nvidia-331 hostname module failed to 
build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1402268/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1284308] Re: Can't copy files from a bluetooth device: Another operation in progress

Dylan Coakley, regarding you not being able to transfer via MTP, this bug is 
not scoped to that problem. If you would like that problem addressed, please 
file a new report via a terminal:
ubuntu-bug linux

Please feel free to subscribe me to it.

Regarding a fix time line, as one will notice at the top of this report
page, this is a reported upstream issue. Hence, it will be fixed when
developer resources are available for it.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/1284308

Title:
  Can't copy files from a bluetooth device: Another operation in
  progress

Status in GVFS:
  New
Status in gvfs package in Ubuntu:
  Triaged

Bug description:
  1)  lsb_release -rd
  Description:  Ubuntu 14.04.1 LTS
  Release:  14.04

  2) apt-cache policy gvfs
  gvfs:
    Installed: 1.20.1-1ubuntu1
    Candidate: 1.20.1-1ubuntu1
    Version table:
   *** 1.20.1-1ubuntu1 0
  500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages
  100 /var/lib/dpkg/status

  3) What is expected to happen is when one pairs their bluetooth phone,
  browses it, and attempt to copy a file from the phone to Ubuntu, it
  does so successfully.

  4) What happens instead is a window pops up noting:
  Error while copying “example.txt”.
  There was an error copying the file into /home/test/
  Show more details
  Another operation in progress

  Originally reproduced in 13.10.

  /usr/lib/gvfs/gvfsd-obexftp 'host=[XX:XX:XX:XX:XX:XX]'
  ** Message: transfer of example.txt to /tmp/gvfsobexftp-tmp-NTNMQX started
  ** Message: filename: /Internal storage/Download/example.txt (example.txt) 
copying to /tmp/gvfsobexftp-tmp-NTNMQX (retval 2)
  ** Message: ChangeCurrentFolderToRoot failed
  ** Message: transfer got cancelled
  ** Message: ChangeCurrentFolderToRoot failed

  WORKAROUND: Connect phone via USB cord to transfer files from the
  phone to Ubuntu.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.10
  Package: bluetooth (not installed)
  ProcVersionSignature: Ubuntu 3.11.0-17.31-generic 3.11.10.3
  Uname: Linux 3.11.0-17-generic x86_64
  ApportVersion: 2.12.5-0ubuntu2.2
  Architecture: amd64
  Date: Mon Feb 24 21:24:05 2014
  InstallationDate: Installed on 2013-10-11 (136 days ago)
  InstallationMedia: Ubuntu 13.04 Raring Ringtail - Release amd64 (20130424)
  InterestingModules: bnep rfcomm btusb bluetooth
  MachineType: Acer Aspire V3-571G
  MarkForUpload: True
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-17-generic 
root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7
  SourcePackage: bluez
  UpgradeStatus: Upgraded to saucy on 2014-02-23 (1 days ago)
  dmi.bios.date: 10/15/2012
  dmi.bios.vendor: Acer
  dmi.bios.version: V2.07
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: VA50_HC_CR
  dmi.board.vendor: Acer
  dmi.board.version: Type2 - Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V2.07
  dmi.modalias: 
dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07:
  dmi.product.name: Aspire V3-571G
  dmi.product.version: V2.07
  dmi.sys.vendor: Acer
  hciconfig:
   hci0:Type: BR/EDR  Bus: USB
    BD Address: A4:17:31:0D:4A:70  ACL MTU: 1022:8  SCO MTU: 183:5
    UP RUNNING PSCAN ISCAN
    RX bytes:44318 acl:198 sco:0 events:355 errors:0
    TX bytes:6132 acl:178 sco:0 commands:82 errors:0

To manage notifications about this bug go to:
https://bugs.launchpad.net/gvfs/+bug/1284308/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401434] Re: Desktop is distorted after update to 331.113

Tantibus Vulgaris, thank you for reporting this and helping make Ubuntu better.
As per
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-w-series-laptops/thinkpad-w520
an update to your BIOS is available (1.42). If you update to this following
https://help.ubuntu.com/community/BIOSUpdate does it change anything? If it
doesn't, could you please both specify what happened, and provide the output of
the following terminal command:
sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date

For more on BIOS updates and linux, please see
https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette
.

Please note your current BIOS is already in the Bug Description, so
posting this on the old BIOS would not be helpful. As well, you don't
have to create a new bug report.

Once the BIOS is updated, then please mark this report Status New.

Thank you for your understanding.

** Tags added: bios-outdated-1.42

** Changed in: xorg (Ubuntu)
Importance: Undecided = Low

** Changed in: xorg (Ubuntu)
Status: Confirmed = Incomplete

--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401434

Title:
Desktop is distorted after update to 331.113

Status in xorg package in Ubuntu:
Incomplete

Bug description:
After upgrading to 331.113 I have experienced distorted desktop. I
have also experienced the same problem after trying to upgrade to
14.10 and that's why I've reverted to backup of 14.04.

I is quite strange. Unity controls are ok. I.e. Dash and panel on top
look ok. But desktop itself and application windows are stretched to
multi-monitor setup. If I arrange monitors side by side, desktop and
applications are distorted horizontally. If I arrange them top to
bottom, desktop is distorted vertically.

It is interesting, that even screenshot is taken as is, i.e. showing
distortion.

On my current setup I have Dash on both (or three) screens and top
panel repeating. In the screenshot with distortion, however, there's
only one Dash and top panel is not visible (only line seen) on laptop
screen.

Mouse cursor is ok, but it is impossible to point to correct location
on desktop or application window: some hit and miss involved.

I am using Nvidia Optimus with nvidia-prime and lightdm for dual or
three monitor setup (with docking station), laptop screen running on
Intel card.

I suppose this might be simply old configuration files or some package
version, that is not compatible with 331.113. I've reverted to 331.38
and everything's ok. Note, that upgrading to 14.10 had exactly the
same effect.

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: xorg 1:7.7+1ubuntu8
Uname: Linux 3.14.1-031401-generic x86_64
NonfreeKernelModules: nvidia
.proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory:
'/proc/driver/nvidia/gpus/0'
.proc.driver.nvidia.registry: Binary:
.proc.driver.nvidia.version:
NVRM version: NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30
PST 2014
GCC version: gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1)
.tmp.unity.support.test.0:

ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
CompizPlugins: [core,compiztoolbox,mousepoll,vpswitch,imgpng]
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
CurrentDesktop: Unity
Date: Thu Dec 11 10:34:04 2014
DistUpgraded: Fresh install
DistroCodename: trusty
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes
GraphicsCard:
Intel Corporation 2nd Generation Core Processor Family Integrated Graphics
Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21d1]
NVIDIA Corporation GF106GLM [Quadro 2000M] [10de:0dda] (rev a1) (prog-if 00
[VGA controller])
Subsystem: Lenovo Device [17aa:21d1]
InstallationDate: Installed on 2014-04-18 (236 days ago)
InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
MachineType: LENOVO 4282A72
ProcKernelCmdLine: root=UUID=a7ac0cbe-9ae3-433b-8b76-d00c20786809 ro
SourcePackage: xorg
Symptom: display
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 07/06/2012
dmi.bios.vendor: LENOVO
dmi.bios.version: 8BET58WW (1.38 )
dmi.board.asset.tag: Not Available
dmi.board.name: 4282A72
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias:
dmi:bvnLENOVO:bvr8BET58WW(1.38):bd07/06/2012:svnLENOVO:pn4282A72:pvrThinkPadW520:rvnLENOVO:rn4282A72:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 4282A72
dmi.product.version: ThinkPad W520
dmi.sys.vendor: LENOVO
version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1

[Desktop-packages] [Bug 1209008] Re: [SRU] X doesn't work for video cards with non-KMS drivers on non-seat0 seats

2014-12-13 Thread Andrzej Pietrasiewicz

Does NOT work for me :-(

I'm still getting the no screens found error, which, if I understand 
correctly, is supposed to be fixed with:
http://bazaar.launchpad.net/~ubuntu-multiseat/xorg-server/trusty-matchseat/revision/287/debian/patches/xfree86_allow_fallback_to_pci_bus_probe_for_non_seat0.patch

$ cat /etc/apt/sources.list
deb http://archive.ubuntu.com/ubuntu/ trusty-proposed restricted main 
multiverse universe
deb http://pl.archive.ubuntu.com/ubuntu trusty-updates restricted universe main 
multiverse
deb http://security.ubuntu.com/ubuntu/ trusty-security restricted universe main 
multiverse
deb http://pl.archive.ubuntu.com/ubuntu trusty main restricted universe 
multiverse

$ dpkg -l xserver-xorg-core
...
ii  xserver-xorg-core 2:1.15.1-0ubuntu2.6

$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 8400 GS Rev. 
2] (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation G86 [Quadro NVS 290] (rev 
a1)

$ cat /etc/udev/rules.d/99-multiseat.rules
SUBSYSTEM==drm, KERNEL==card[0-9]*, ATTRS{vendor}==0x10de, 
TAG+=master-of-seat

TAG==seat, DEVPATH==/devices/pci:00/:00:01.0/:01:00.0/*, 
ENV{ID_SEAT}=seat0, TAG+=seat0
TAG==seat, DEVPATH==/devices/pci:00/:00:1c.2/:03:00.0/*, 
ENV{ID_SEAT}=seat-1, TAG+=seat-1

TAG==seat, SUBSYSTEM==usb, ATTR{name}==DELL Dell USB Entry Keyboard, 
ENV{ID_SEAT}=seat0, TAG+=seat0
TAG==seat, SUBSYSTEM==usb, ATTR{name}==Logitech USB-PS/2 Optical Mouse, 
ENV{ID_SEAT}=seat0, TAG+=seat0

TAG==seat, SUBSYSTEM==input, ATTR{name}==AT Translated Set 2 keyboard, 
ENV{ID_SEAT}=seat-1, TAG+=seat-1
TAG==seat, SUBSYSTEM==input, ATTR{name}==ImPS/2 Generic Wheel Mouse, 
ENV{ID_SEAT}=seat-1, TAG+=seat-1

$ loginctl list-seats
SEAT
seat0   
seat-1  

2 seats listed.

$ loginctl show-seat seat0
Id=seat0
ActiveSession=c2
CanMultiSession=yes
CanTTY=yes
CanGraphical=yes
Sessions=c2
IdleHint=no
IdleSinceHint=0
IdleSinceHintMonotonic=0

$ loginctl show-seat seat-1
Id=seat-1
CanMultiSession=no
CanTTY=no
CanGraphical=yes
IdleHint=yes
IdleSinceHint=0
IdleSinceHintMonotonic=0

$ loginctl list-sessions
   SESSIONUID USER SEAT
c2   1000 andrzejtpseat0   

1 sessions listed.

$ loginctl seat-status seat0
seat0
Sessions: *c2
 Devices:
  /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
   input:input1 Power Button
  /sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
   input:input0 Power Button
  /sys/devices/pci:00/:00:01.0/:01:00.0/drm/card0
   [MASTER] drm:card0
  /sys/devices/pci:00/:00:1a.0/usb3
   usb:usb3
  /sys/devices/pci:00/:00:1a.1/usb4
   usb:usb4
  /sys/devices/pci:00/:00:1a.2/usb5
   usb:usb5
  /sys/devices/pci:00/:00:1a.7/usb1
   usb:usb1
  /sys/devices/pci:00/:00:1b.0/sound/card0
   sound:card0 Intel
  /sys/devices/pci:00/:00:1b.0/sound/card0/input10
   input:input10 HDA Intel Line Out CLFE
  /sys/devices/pci:00/:00:1b.0/sound/card0/input11
   input:input11 HDA Intel Line Out Side
  /sys/devices/pci:00/:00:1b.0/sound/card0/input12
   input:input12 HDA Intel Front Headphone
  /sys/devices/pci:00/:00:1b.0/sound/card0/input5
   input:input5 HDA Intel Rear Mic
  /sys/devices/pci:00/:00:1b.0/sound/card0/input6
   input:input6 HDA Intel Front Mic
  /sys/devices/pci:00/:00:1b.0/sound/card0/input7
   input:input7 HDA Intel Line
  /sys/devices/pci:00/:00:1b.0/sound/card0/input8
   input:input8 HDA Intel Line Out Front
  /sys/devices/pci:00/:00:1b.0/sound/card0/input9
 input:input9 HDA Intel Line Out Surround
  
/sys/devices/pci:00/:00:1c.4/:04:00.0/ata5/host4/target4:0:0/4:0:0:0/block/sr0
   block:sr0
  
/sys/devices/pci:00/:00:1c.4/:04:00.0/ata5/host4/target4:0:0/4:0:0:0/scsi_generic/sg1
   scsi_generic:sg1
  
/sys/devices/pci:00/:00:1c.4/:04:00.0/ata5/host4/target4:0:1/4:0:1:0/block/sr1
   block:sr1
  
/sys/devices/pci:00/:00:1c.4/:04:00.0/ata5/host4/target4:0:1/4:0:1:0/scsi_generic/sg2
   scsi_generic:sg2
  /sys/devices/pci:00/:00:1d.0/usb6
   usb:usb6
  /sys/devices/pci:00/:00:1d.1/usb7
   usb:usb7

[Desktop-packages] [Bug 1401351] [NEW] sshfs/gvfs mount consumes 100% cpu on local and remote computer

You have been subscribed to a public bug:

After upgrade from 14.04 to 14.10 I am having very slow file transfers
when I use Connect to Server in  Files (nautilus?) over gigabit LAN.
(10 mb/sec max) This is fixed by mounting folder with sshfs and I can
transfer 3 gb file in a few seconds BUT on CPU single core on local and
remote host has 100% CPU utilization and very high memory usage by gvfs.

sshfs user@remote:/home/folder/ /home/folder

fusermount -u ~/folder kills the 100% single core CPU and memory usage
on local but on remote machine 100% CPU of single core of CPU and large
amounts of memory still being utilized by gvfs.

Local machine is Ubuntu 14.10 64 bit (Upgrade from 14.04) and remote is
Ubuntu Server 14.10 64bit (Upgrade from 14.04 also)

(I don't know which program being used under gvfs is causing the high
memory and 100% single CPU core utilization.)

** Affects: gvfs (Ubuntu)
 Importance: Medium
 Status: Incomplete


** Tags: gvfs sshfs
-- 
sshfs/gvfs mount consumes 100% cpu on local and remote computer
https://bugs.launchpad.net/bugs/1401351
You received this bug notification because you are a member of Desktop 
Packages, which is subscribed to gvfs in Ubuntu.

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1399900] Re: screen brightness cannot be changed anymore

** No longer affects: unity (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-settings-daemon in Ubuntu.
Matching subscriptions: dp-unity
https://bugs.launchpad.net/bugs/1399900

Title:
  screen brightness cannot be changed anymore

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  The screen brightness does not reliably respond to adjustments anymore since 
14.10 release. 
  Previously in 14.04 it was adjustable via a slider in Ubuntu Control Center 
and via the keyboard buttons (so there is driver and keyboard support for this 
laptop). 
  Now the keyboard buttons as well as the slider have no effect and the 
brightness defaults to 100% which is on this device about five times brighter 
than the comfortable level, and strains the battery.

  However about 1 in 20 bootups/logins, the brightness is adjustable,
  but when I logout/login again in the user session, it might again
  become locked to 100%. I have the suspicion that it depends on the
  loading of desktop configs or the time I wait before typing my
  password to login.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity 7.3.1+14.10.20141016-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7
  Uname: Linux 3.16.0-25-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Sat Dec  6 12:20:50 2014
  DistUpgraded: 2014-11-04 18:35:56,188 DEBUG enabling apt cron job
  DistroCodename: utopic
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.3.18, 3.16.0-24-generic, x86_64: installed
   virtualbox, 4.3.18, 3.16.0-25-generic, x86_64: installed
  EcryptfsInUse: Yes
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:3978]
  InstallationDate: Installed on 2014-02-02 (306 days ago)
  InstallationMedia: Ubuntu-GNOME 14.04 Trusty Tahr - Alpha amd64 (20140201)
  MachineType: LENOVO 20266
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed 
root=UUID=4bfb3686-b9f7-487d-81f6-eceb41097ad9 ro quiet splash 
acpi_backlight=vendor vt.handoff=7
  SourcePackage: unity
  UpgradeStatus: Upgraded to utopic on 2014-11-04 (31 days ago)
  XorgConf:
   
  dmi.bios.date: 10/31/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 76CN31WW
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: Yoga2
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058STD
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo Yoga 2 Pro
  dmi.modalias: 
dmi:bvnLENOVO:bvr76CN31WW:bd10/31/2013:svnLENOVO:pn20266:pvrLenovoYoga2Pro:rvnLENOVO:rnYoga2:rvr31900058STD:cvnLENOVO:ct10:cvrLenovoYoga2Pro:
  dmi.product.name: 20266
  dmi.product.version: Lenovo Yoga 2 Pro
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec  6 12:19:59 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   16970 
   vendor SDC
  xserver.version: 2:1.16.0-1ubuntu1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1399900/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1399900] Re: screen brightness cannot be changed anymore

** Project changed: unity-settings-daemon = unity (Ubuntu)

** Changed in: unity (Ubuntu)
   Status: New = Invalid

** No longer affects: unity (Ubuntu)

** Project changed: unity = unity (Ubuntu)

** No longer affects: unity (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-settings-daemon in Ubuntu.
Matching subscriptions: dp-unity
https://bugs.launchpad.net/bugs/1399900

Title:
  screen brightness cannot be changed anymore

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  The screen brightness does not reliably respond to adjustments anymore since 
14.10 release. 
  Previously in 14.04 it was adjustable via a slider in Ubuntu Control Center 
and via the keyboard buttons (so there is driver and keyboard support for this 
laptop). 
  Now the keyboard buttons as well as the slider have no effect and the 
brightness defaults to 100% which is on this device about five times brighter 
than the comfortable level, and strains the battery.

  However about 1 in 20 bootups/logins, the brightness is adjustable,
  but when I logout/login again in the user session, it might again
  become locked to 100%. I have the suspicion that it depends on the
  loading of desktop configs or the time I wait before typing my
  password to login.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity 7.3.1+14.10.20141016-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7
  Uname: Linux 3.16.0-25-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Sat Dec  6 12:20:50 2014
  DistUpgraded: 2014-11-04 18:35:56,188 DEBUG enabling apt cron job
  DistroCodename: utopic
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.3.18, 3.16.0-24-generic, x86_64: installed
   virtualbox, 4.3.18, 3.16.0-25-generic, x86_64: installed
  EcryptfsInUse: Yes
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:3978]
  InstallationDate: Installed on 2014-02-02 (306 days ago)
  InstallationMedia: Ubuntu-GNOME 14.04 Trusty Tahr - Alpha amd64 (20140201)
  MachineType: LENOVO 20266
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed 
root=UUID=4bfb3686-b9f7-487d-81f6-eceb41097ad9 ro quiet splash 
acpi_backlight=vendor vt.handoff=7
  SourcePackage: unity
  UpgradeStatus: Upgraded to utopic on 2014-11-04 (31 days ago)
  XorgConf:
   
  dmi.bios.date: 10/31/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 76CN31WW
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: Yoga2
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058STD
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo Yoga 2 Pro
  dmi.modalias: 
dmi:bvnLENOVO:bvr76CN31WW:bd10/31/2013:svnLENOVO:pn20266:pvrLenovoYoga2Pro:rvnLENOVO:rnYoga2:rvr31900058STD:cvnLENOVO:ct10:cvrLenovoYoga2Pro:
  dmi.product.name: 20266
  dmi.product.version: Lenovo Yoga 2 Pro
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec  6 12:19:59 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   16970 
   vendor SDC
  xserver.version: 2:1.16.0-1ubuntu1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1399900/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1399900] Re: screen brightness cannot be changed anymore

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: unity (Ubuntu)
   Status: New = Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/1399900

Title:
  screen brightness cannot be changed anymore

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  The screen brightness does not reliably respond to adjustments anymore since 
14.10 release. 
  Previously in 14.04 it was adjustable via a slider in Ubuntu Control Center 
and via the keyboard buttons (so there is driver and keyboard support for this 
laptop). 
  Now the keyboard buttons as well as the slider have no effect and the 
brightness defaults to 100% which is on this device about five times brighter 
than the comfortable level, and strains the battery.

  However about 1 in 20 bootups/logins, the brightness is adjustable,
  but when I logout/login again in the user session, it might again
  become locked to 100%. I have the suspicion that it depends on the
  loading of desktop configs or the time I wait before typing my
  password to login.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity 7.3.1+14.10.20141016-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7
  Uname: Linux 3.16.0-25-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Sat Dec  6 12:20:50 2014
  DistUpgraded: 2014-11-04 18:35:56,188 DEBUG enabling apt cron job
  DistroCodename: utopic
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.3.18, 3.16.0-24-generic, x86_64: installed
   virtualbox, 4.3.18, 3.16.0-25-generic, x86_64: installed
  EcryptfsInUse: Yes
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:3978]
  InstallationDate: Installed on 2014-02-02 (306 days ago)
  InstallationMedia: Ubuntu-GNOME 14.04 Trusty Tahr - Alpha amd64 (20140201)
  MachineType: LENOVO 20266
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed 
root=UUID=4bfb3686-b9f7-487d-81f6-eceb41097ad9 ro quiet splash 
acpi_backlight=vendor vt.handoff=7
  SourcePackage: unity
  UpgradeStatus: Upgraded to utopic on 2014-11-04 (31 days ago)
  XorgConf:
   
  dmi.bios.date: 10/31/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 76CN31WW
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: Yoga2
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058STD
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo Yoga 2 Pro
  dmi.modalias: 
dmi:bvnLENOVO:bvr76CN31WW:bd10/31/2013:svnLENOVO:pn20266:pvrLenovoYoga2Pro:rvnLENOVO:rnYoga2:rvr31900058STD:cvnLENOVO:ct10:cvrLenovoYoga2Pro:
  dmi.product.name: 20266
  dmi.product.version: Lenovo Yoga 2 Pro
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec  6 12:19:59 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   16970 
   vendor SDC
  xserver.version: 2:1.16.0-1ubuntu1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1399900/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1399900] Re: screen brightness cannot be changed anymore

Andreas E., as per 
http://support.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-2-pro-lenovo
 an update to your BIOS is available (76cn38ww). If you update to this 
following https://help.ubuntu.com/community/BIOSUpdate does it change anything? 
 If it doesn't, could you please both specify what happened, and provide the 
output of the following terminal command:
sudo dmidecode -s bios-version  sudo dmidecode -s bios-release-date

For more on BIOS updates and linux, please see
https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette
.

Please note your current BIOS is already in the Bug Description, so
posting this on the old BIOS would not be helpful. As well, you don't
have to create a new bug report.

Once the BIOS is updated, then please mark this report Status Confirmed.

Thank you for your understanding.

** Package changed: unity-settings-daemon (Ubuntu) = linux (Ubuntu)

** Changed in: linux (Ubuntu)
   Importance: Undecided = Low

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/1399900

Title:
  screen brightness cannot be changed anymore

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  The screen brightness does not reliably respond to adjustments anymore since 
14.10 release. 
  Previously in 14.04 it was adjustable via a slider in Ubuntu Control Center 
and via the keyboard buttons (so there is driver and keyboard support for this 
laptop). 
  Now the keyboard buttons as well as the slider have no effect and the 
brightness defaults to 100% which is on this device about five times brighter 
than the comfortable level, and strains the battery.

  However about 1 in 20 bootups/logins, the brightness is adjustable,
  but when I logout/login again in the user session, it might again
  become locked to 100%. I have the suspicion that it depends on the
  loading of desktop configs or the time I wait before typing my
  password to login.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: unity 7.3.1+14.10.20141016-0ubuntu1
  ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7
  Uname: Linux 3.16.0-25-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Sat Dec  6 12:20:50 2014
  DistUpgraded: 2014-11-04 18:35:56,188 DEBUG enabling apt cron job
  DistroCodename: utopic
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.3.18, 3.16.0-24-generic, x86_64: installed
   virtualbox, 4.3.18, 3.16.0-25-generic, x86_64: installed
  EcryptfsInUse: Yes
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:3978]
  InstallationDate: Installed on 2014-02-02 (306 days ago)
  InstallationMedia: Ubuntu-GNOME 14.04 Trusty Tahr - Alpha amd64 (20140201)
  MachineType: LENOVO 20266
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic.efi.signed 
root=UUID=4bfb3686-b9f7-487d-81f6-eceb41097ad9 ro quiet splash 
acpi_backlight=vendor vt.handoff=7
  SourcePackage: unity
  UpgradeStatus: Upgraded to utopic on 2014-11-04 (31 days ago)
  XorgConf:
   
  dmi.bios.date: 10/31/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 76CN31WW
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: Yoga2
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058STD
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo Yoga 2 Pro
  dmi.modalias: 
dmi:bvnLENOVO:bvr76CN31WW:bd10/31/2013:svnLENOVO:pn20266:pvrLenovoYoga2Pro:rvnLENOVO:rnYoga2:rvr31900058STD:cvnLENOVO:ct10:cvrLenovoYoga2Pro:
  dmi.product.name: 20266
  dmi.product.version: Lenovo Yoga 2 Pro
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec  6 12:19:59 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   
  xserver.logfile:

[Desktop-packages] [Bug 1244087] Re: Ubuntu 13.10 Main Menu editor Problem

2014-12-13 Thread leanid chaika

Bug still exist in Ubuntu 14.10 Can't create new Items! Disappointing in
ubuntu...

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alacarte in Ubuntu.
https://bugs.launchpad.net/bugs/1244087

Title:
  Ubuntu 13.10 Main Menu editor Problem

Status in One Hundred Papercuts:
  Incomplete
Status in alacarte package in Ubuntu:
  Fix Released

Bug description:
  I just ungraded to *Ubuntu 13.10* using ) *Gnome (classic) Desktop*.

  The [Main Menu] editor does NOT work properly.

  I cannot ADD items.

  I CAN edit and move existing items only.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hundredpapercuts/+bug/1244087/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401351] Re: sshfs/gvfs mount consumes 100% cpu on local and remote computer

thecure, thank you for taking the time to report this bug and helping to make 
Ubuntu better. Please execute the following command, as it will automatically 
gather debugging information, in a terminal:
apport-collect 1401351
When reporting bugs in the future please use apport by using 'ubuntu-bug' and 
the name of the package affected. You can learn more about this functionality 
at https://wiki.ubuntu.com/ReportingBugs.

Also, if you only downgrade either the client or server (not both) is
the problem either not reproducible, or only reproducible on one of the
clients?

** Package changed: usbmuxd (Ubuntu) = gvfs (Ubuntu)

** Changed in: gvfs (Ubuntu)
   Importance: Undecided = Medium

** Changed in: gvfs (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gvfs in Ubuntu.
https://bugs.launchpad.net/bugs/1401351

Title:
  sshfs/gvfs mount consumes 100% cpu on local and remote computer

Status in gvfs package in Ubuntu:
  Incomplete

Bug description:
  After upgrade from 14.04 to 14.10 I am having very slow file transfers
  when I use Connect to Server in  Files (nautilus?) over gigabit
  LAN. (10 mb/sec max) This is fixed by mounting folder with sshfs and I
  can transfer 3 gb file in a few seconds BUT on CPU single core on
  local and remote host has 100% CPU utilization and very high memory
  usage by gvfs.

  sshfs user@remote:/home/folder/ /home/folder

  fusermount -u ~/folder kills the 100% single core CPU and memory usage
  on local but on remote machine 100% CPU of single core of CPU and
  large amounts of memory still being utilized by gvfs.

  Local machine is Ubuntu 14.10 64 bit (Upgrade from 14.04) and remote
  is Ubuntu Server 14.10 64bit (Upgrade from 14.04 also)

  (I don't know which program being used under gvfs is causing the high
  memory and 100% single CPU core utilization.)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1401351/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401329] Re: Brightness

Igor Daniel, thank you for reporting this and helping make Ubuntu
better. Could you please test the latest upstream kernel available from
the very top line at the top of the page (the release names are
irrelevant for testing, and please do not test the daily folder)
following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow
additional upstream developers to examine the issue.

If the test did not allow you to test to the issue (ex. you couldn't boot into 
the OS) please make a comment in your report about this, and continue to test 
the next most recent kernel version until you can test to the issue. Once 
you've tested the upstream kernel, please comment on which kernel version 
specifically you tested. If this bug is fixed in the mainline kernel, please 
add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested exactly 
shown as:
kernel-fixed-upstream-3.18

This can be done by clicking on the yellow circle with a black pencil
icon next to the word Tags located at the bottom of the bug description.

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.

** Package changed: xorg (Ubuntu) = linux (Ubuntu)

** Changed in: linux (Ubuntu)
   Importance: Undecided = Medium

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401329

Title:
  Brightness

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Since I upgraded my Ubuntu form version 14.04 to 14.10 the Screen
  Brightness is always the highest and I can't change it.  Even  when I
  go to the settings and change the Brightness it keeps the same

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: xorg 1:7.7+7ubuntu2
  ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7
  Uname: Linux 3.16.0-25-generic i686
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: i386
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Wed Dec 10 21:31:27 2014
  DistUpgraded: 2014-12-04 01:27:04,588 DEBUG enabling apt cron job
  DistroCodename: utopic
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.3.18, 3.13.0-40-generic, i686: installed
   virtualbox, 4.3.18, 3.16.0-25-generic, i686: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:2027]
  InstallationDate: Installed on 2014-07-03 (160 days ago)
  InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1)
  MachineType: Standard Standard
  ProcEnviron:
   LANGUAGE=pt_BR:pt:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=set
   LANG=pt_BR.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  SourcePackage: xorg
  Symptom: display
  UpgradeStatus: Upgraded to utopic on 2014-12-04 (6 days ago)
  dmi.bios.date: 05/06/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1.07
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: Standard
  dmi.board.vendor: Standard
  dmi.board.version: To be filled by O.E.M.
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 10
  dmi.chassis.vendor: Standard
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1.07:bd05/06/2013:svnStandard:pnStandard:pvrTobefilledbyO.E.M.:rvnStandard:rnStandard:rvrTobefilledbyO.E.M.:cvnStandard:ct10:cvrToBeFilledByO.E.M.:
  dmi.product.name: Standard
  dmi.product.version: To be filled by O.E.M.
  dmi.sys.vendor: Standard
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau

[Desktop-packages] [Bug 1401284] Re: Bug causes xorg to crash and system to require hard reboot.

SImon, thank you for reporting this and helping make Ubuntu better. Please 
answer the following questions:
+ Did this just start happening recently, or has it been happening since 
installing Trusty?
+ Did this problem not occur in a release prior to Trusty?
+ How often does this crash occur?
+ Is the crash correlated to using any particular program(s) (ex. more likely 
when use Virtualbox and Firefox)?
+ Is this reproducible on the latest release of Ubuntu available from 
http://cdimage.ubuntu.com/daily-live/current/ ?

** Tags added: latest-bios-2.33

** Description changed:

+ Xorg backtrace:
+ https://launchpadlibrarian.net/192287995/XorgLog.txt
+ 
  These seem similar:
- 
  https://www.libreoffice.org/bugzilla/show_bug.cgi?id=62912
  https://www.libreoffice.org/bugzilla/show_bug.cgi?id=74420
  
  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
  Uname: Linux 3.13.0-40-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  Date: Thu Dec 11 10:54:19 2014
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  DkmsStatus: virtualbox, 4.3.10, 3.13.0-40-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
-  Subsystem: Hewlett-Packard Company Device [103c:1998]
-  NVIDIA Corporation GT218 [NVS 300] [10de:10d8] (rev a2) (prog-if 00 [VGA 
controller])
-Subsystem: Hewlett-Packard Company Device [103c:0862]
+  Subsystem: Hewlett-Packard Company Device [103c:1998]
+  NVIDIA Corporation GT218 [NVS 300] [10de:10d8] (rev a2) (prog-if 00 [VGA 
controller])
+    Subsystem: Hewlett-Packard Company Device [103c:0862]
  MachineType: Hewlett-Packard HP EliteDesk 800 G1 SFF
  ProcEnviron:
-  LANGUAGE=en_NZ:en
-  TERM=xterm
-  PATH=(custom, no user)
-  LANG=en_NZ.UTF-8
-  SHELL=/bin/bash
+  LANGUAGE=en_NZ:en
+  TERM=xterm
+  PATH=(custom, no user)
+  LANG=en_NZ.UTF-8
+  SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-40-generic 
root=UUID=5586976c-f92f-4793-9cba-6408416e6deb ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 07/15/2014
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: L01 v02.33
  dmi.board.asset.tag: AUD445047Q
  dmi.board.name: 1998
  dmi.board.vendor: Hewlett-Packard
  dmi.chassis.asset.tag: AUD445047Q
  dmi.chassis.type: 4
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrL01v02.33:bd07/15/2014:svnHewlett-Packard:pnHPEliteDesk800G1SFF:pvr:rvnHewlett-Packard:rn1998:rvr:cvnHewlett-Packard:ct4:cvr:
  dmi.product.name: HP EliteDesk 800 G1 SFF
  dmi.sys.vendor: Hewlett-Packard
  version.compiz: compiz 1:0.9.11.3+14.04.20141104-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.52-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.2
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.3
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Thu Dec 11 09:41:33 2014
  xserver.configfile: default
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.15.1-0ubuntu2.1
  xserver.video_driver: nouveau

** Changed in: xorg (Ubuntu)
   Importance: Undecided = Medium

** Changed in: xorg (Ubuntu)
   Status: New = Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401284

Title:
  Bug causes xorg to crash and system to require hard reboot.

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Xorg backtrace:
  https://launchpadlibrarian.net/192287995/XorgLog.txt

  These seem similar:
  https://www.libreoffice.org/bugzilla/show_bug.cgi?id=62912
  https://www.libreoffice.org/bugzilla/show_bug.cgi?id=74420

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
  Uname: Linux 3.13.0-40-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.6
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  Date: Thu Dec 11 10:54:19 2014
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  DkmsStatus: virtualbox, 4.3.10, 3.13.0-40-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Subsystem: Hewlett-Packard Company Device [103c:1998]
   NVIDIA Corporation

[Desktop-packages] [Bug 1209008] Re: [SRU] X doesn't work for video cards with non-KMS drivers on non-seat0 seats

2014-12-13 Thread Andrzej Pietrasiewicz

** Tags added: verification-failed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1209008

Title:
  [SRU] X doesn't work for video cards with non-KMS drivers on non-seat0
  seats

Status in X.Org X server:
  Fix Released
Status in xorg-server package in Ubuntu:
  Fix Released
Status in xorg-server source package in Trusty:
  Fix Committed

Bug description:
  [Impact]

  * In Xorg-server versions older than 1.16, if Xorg is started as a
  non-seat0 X server (i.e. if it was started with -seat  option
  where  != seat0), it only probes platform bus for graphics
  devices, leaving devices with non-KMS drivers (like NVIDIA proprietary
  drivers and old ones like xf86-video-siliconmotion) unreachable.

  Patch xfree86_allow_fallback_to_pci_bus_probe_for_non_seat0.patch
  from lp:~ubuntu-multiseat/xorg-server/trusty-matchseat fixes this.

  * systemd-logind has no intrinsic mechanism to assign non-KMS graphics
  devices to seats. In this case, one should tag another seat device
  (keyboard, USB hub, etc.) in udev as master-of-seat, and provide a
  suitable xorg.conf for that seat. In order to avoid that a given
  xorg.conf affects other seats, it should be passed to Xorg via
  -config xorg.conf.custom option, which requires X server command
  line customization support in DM in use (GDM, for example, has no such
  support).

  Patch xfree86_add_matchseat_key_to_xorg_conf.patch from lp:~ubuntu-
  multiseat/xorg-server/trusty-matchseat introduces a new MatchSeat key
  for xorg.conf sections Device, Screen, and ServerLayout, which
  will target a given seat only. Example file
  /etc/X11/xorg.conf.d/90-seat-1.conf:

  Section Device
  Identifier card0
  Driver nvidia
  Option NoLogo True
  # This section will only apply for seat-1
  MatchSeat seat-1
  EndSection

  * systemd-logind can't handle any VT switching for non-seat0 seats,
  but Xorg-server older than 1.16 still opens VT even if it's started as
  a non-seat0 X server. This may lead to a race condition between X
  servers: if a non-seat0 one is started before a seat0 one, the former
  steals VTs from the later. If a seat0 X server can't open VTs,
  systemd-logind can't activate sessions for seat0, leaving user without
  sound or usb input support, for example.

  Patch xfree86_keep_non_seat0_from_touching_vts.patch from lp
  :~ubuntu-multiseat/xorg-server/trusty-matchseat fixes this.

  [Test Case]

  * Set up a multiseat system where your non-seat0 seats use non-KMS
  video drivers (you may need to tag another device in udev as master-
  of-seat in order to achieve it).

  * When LightDM/GDM tries to start a Xorg server for your non-seat0
  seats, it will end up with the following error: (EE) No devices
  found.

  * After applying
  xfree86_allow_fallback_to_pci_bus_probe_for_non_seat0.patch, you can
  configure your seats in LightDM by setting appropriate xserver-
  config properties for each seat. However, you can't configure them in
  GDM.

  * After applying xfree86_add_matchseat_key_to_xorg_conf.patch,
  configure your seats properly and restart LightDM/GDM services (or
  reboot your computer) repeatedly. In some iterations, it may happen
  that logind can't activate graphical sessions for seat0. If it occurs,
  check output of command ps -FC Xorg and you'll see that a non-seat0
  Xorg server has a lower PID than seat0 one. Moreover, the non-seat0
  has opened a TTY, while the seat0 hasn't.

  [Regression Potential]

  * Very low. All these patches were well tested in xorg-server trusty
  package available in ppa:ubuntu-multiseat/ppa.

To manage notifications about this bug go to:
https://bugs.launchpad.net/xorg-server/+bug/1209008/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1373363] Re: 1002:9830 [Lenovo Ideapad S415 Touch] Screen corruption in Firefox via Radeon

Still happens after upgrading to linux-generic-lts-utopic stack in Trusty, and 
BIOS update:
uname -a
Linux monikerpc 3.16.0-28-generic #37-Ubuntu SMP Tue Dec 9 11:06:13 UTC 2014 
x86_64 x86_64 x86_64 GNU/Linux

sudo dmidecode -s bios-version  sudo dmidecode -s bios-release-date
8CCN34WW(V3.04)
10/14/2014

** Tags removed: latest-bios-2.03
** Tags added: latest-bios-3.04

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1373363

Title:
  1002:9830 [Lenovo Ideapad S415 Touch] Screen corruption in Firefox via
  Radeon

Status in xorg package in Ubuntu:
  New

Bug description:
  I get intermittent screen corruption in Firefox using the Radeon
  driver. It's typically a character here and there, once every few
  minutes. A screenshot of this is attached.

  WORKAROUND: While the fglrx driver doesn't exhibit this exact problem,
  I get heavy screen corruption when having a lot of different flash
  based videos play simultaneously in chromium.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8
  ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6
  Uname: Linux 3.13.0-35-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.4
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Wed Sep 24 05:41:20 2014
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8400] [1002:9830] 
(prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:3802]
  InstallationDate: Installed on 2014-06-21 (94 days ago)
  InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417)
  MachineType: LENOVO 20319
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic.efi.signed 
root=UUID=a2db89ed-d599-4138-8838-0b950b6c3fbb ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/14/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 8CCN29WW(V2.03)
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: Lenovo IdeaPad S415 Touch
  dmi.board.vendor: LENOVO
  dmi.board.version: 31900058Std
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo IdeaPad S415 Touch
  dmi.modalias: 
dmi:bvnLENOVO:bvr8CCN29WW(V2.03):bd11/14/2013:svnLENOVO:pn20319:pvrLenovoIdeaPadS415Touch:rvnLENOVO:rnLenovoIdeaPadS415Touch:rvr31900058Std:cvnLENOVO:ct10:cvrLenovoIdeaPadS415Touch:
  dmi.product.name: 20319
  dmi.product.version: Lenovo IdeaPad S415 Touch
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.11.2+14.04.20140714-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.52-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.1
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.1
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Mon Sep 22 22:28:04 2014
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.15.1-0ubuntu2.1
  xserver.video_driver: radeon

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1373363/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] Re: Empty desktop

apport information

** Tags added: apport-collected compiz-0.9 ubuntu utopic

** Description changed:

  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
+ --- 
+ .tmp.unity.support.test.0:
+  
+ ApportVersion: 2.14.7-0ubuntu8
+ Architecture: amd64
+ CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
+ CompositorRunning: compiz
+ CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
+ CompositorUnredirectFSW: true
+ DistUpgraded: Fresh install
+ DistroCodename: utopic
+ DistroRelease: Ubuntu 14.10
+ DistroVariant: ubuntu
+ DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
+ ExtraDebuggingInterest: Yes, if not too technical
+ GraphicsCard:
+  Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
+Subsystem: Acer Incorporated [ALI] Device [1025:0487]
+ InstallationDate: Installed on 2014-12-08 (5 days ago)
+ InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
+ MachineType: Acer Aspire 5742G
+ NonfreeKernelModules: fglrx
+ Package: xorg 1:7.7+7ubuntu2
+ PackageArchitecture: amd64
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
+ ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
+ Tags:  utopic ubuntu compiz-0.9
+ Uname: Linux 3.16.0-28-generic x86_64
+ UpgradeStatus: No upgrade log present (probably fresh install)
+ UserGroups:
+  
+ _MarkForUpload: True
+ dmi.bios.date: 08/11/2010
+ dmi.bios.vendor: Acer
+ dmi.bios.version: V1.04
+ dmi.board.asset.tag: Base Board Asset Tag
+ dmi.board.name: Aspire 5742G
+ dmi.board.vendor: Acer
+ dmi.board.version: V1.04
+ dmi.chassis.type: 10
+ dmi.chassis.vendor: Acer
+ dmi.chassis.version: V1.04
+ dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
+ dmi.product.name: Aspire 5742G
+ dmi.product.version: V1.04
+ dmi.sys.vendor: Acer
+ version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
+ version.fglrx-installer: fglrx-installer N/A
+ version.ia32-libs: ia32-libs N/A
+ version.libdrm2: libdrm2 2.4.56-1
+ version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
+ version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
+ version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
+ version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
+ version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
+ version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
+ version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
+ version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
+ xserver.bootTime: Sat Dec 13 20:11:13 2014
+ xserver.configfile: /etc/X11/xorg.conf
+ xserver.errors:
+  AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
+  AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
+  AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
+ xserver.logfile: /var/log/Xorg.0.log
+ xserver.version: 2:1.16.0-1ubuntu1.2
+ xserver.video_driver: fglrx

** Attachment added: BootDmesg.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280508/+files/BootDmesg.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic

[Desktop-packages] [Bug 1401508] BootLog.txt

apport information

** Attachment added: BootLog.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280509/+files/BootLog.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] DpkgLog.txt

apport information

** Attachment added: DpkgLog.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280512/+files/DpkgLog.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] Dependencies.txt

apport information

** Attachment added: Dependencies.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280511/+files/Dependencies.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] CurrentDmesg.txt

apport information

** Attachment added: CurrentDmesg.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280510/+files/CurrentDmesg.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] MonitorsUser.xml.txt

apport information

** Attachment added: MonitorsUser.xml.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280518/+files/MonitorsUser.xml.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] ProcCpuinfo.txt

apport information

** Attachment added: ProcCpuinfo.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280519/+files/ProcCpuinfo.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] ProcInterrupts.txt

apport information

** Attachment added: ProcInterrupts.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280521/+files/ProcInterrupts.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] ProcEnviron.txt

apport information

** Attachment added: ProcEnviron.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280520/+files/ProcEnviron.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] GconfCompiz.txt

apport information

** Attachment added: GconfCompiz.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280513/+files/GconfCompiz.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] LightdmDisplayLog.txt

apport information

** Attachment added: LightdmDisplayLog.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280514/+files/LightdmDisplayLog.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] Lsusb.txt

apport information

** Attachment added: Lsusb.txt
   https://bugs.launchpad.net/bugs/1401508/+attachment/4280517/+files/Lsusb.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] Lspci.txt

apport information

** Attachment added: Lspci.txt
   https://bugs.launchpad.net/bugs/1401508/+attachment/4280516/+files/Lspci.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] LightdmLog.txt

apport information

** Attachment added: LightdmLog.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280515/+files/LightdmLog.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] XorgLogOld.txt

apport information

** Attachment added: XorgLogOld.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280528/+files/XorgLogOld.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] Xrandr.txt

apport information

** Attachment added: Xrandr.txt
   https://bugs.launchpad.net/bugs/1401508/+attachment/4280529/+files/Xrandr.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] xdpyinfo.txt

apport information

** Attachment added: xdpyinfo.txt
   
https://bugs.launchpad.net/bugs/1401508/+attachment/4280530/+files/xdpyinfo.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1401508

Title:
  Empty desktop

Status in xorg package in Ubuntu:
  Incomplete

Bug description:
  Hi i just installed ubuntu 14.10,after booting i can see my desktop 
background i also can log in,changing from desktop to terminal, but every time 
i go to desktop i only see the background image with no icons or menu bar.
  I've tried sudo apt-get update,upgrade,xserver-xorg-core,ubuntu-desktop,etc 
and i only see background image,any ideias?the grephic card is ati 5470
  --- 
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.7-0ubuntu8
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  DistUpgraded: Fresh install
  DistroCodename: utopic
  DistroRelease: Ubuntu 14.10
  DistroVariant: ubuntu
  DkmsStatus: fglrx-core, 14.201, 3.16.0-28-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 
5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller])
 Subsystem: Acer Incorporated [ALI] Device [1025:0487]
  InstallationDate: Installed on 2014-12-08 (5 days ago)
  InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1)
  MachineType: Acer Aspire 5742G
  NonfreeKernelModules: fglrx
  Package: xorg 1:7.7+7ubuntu2
  PackageArchitecture: amd64
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=5b47d254-cbe2-4cc8-acb2-0f0a81fff137 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.16.0-28.37-generic 3.16.7-ckt1
  Tags:  utopic ubuntu compiz-0.9
  Uname: Linux 3.16.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 08/11/2010
  dmi.bios.vendor: Acer
  dmi.bios.version: V1.04
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Aspire 5742G
  dmi.board.vendor: Acer
  dmi.board.version: V1.04
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V1.04
  dmi.modalias: 
dmi:bvnAcer:bvrV1.04:bd08/11/2010:svnAcer:pnAspire5742G:pvrV1.04:rvnAcer:rnAspire5742G:rvrV1.04:cvnAcer:ct10:cvrV1.04:
  dmi.product.name: Aspire 5742G
  dmi.product.version: V1.04
  dmi.sys.vendor: Acer
  version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.56-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3
  version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.914-1~exp1ubuntu4.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2
  xserver.bootTime: Sat Dec 13 20:11:13 2014
  xserver.configfile: /etc/X11/xorg.conf
  xserver.errors:
   AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object 
file: No such file or directory]
   AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, 
error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file 
or directory]
   AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, 
error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: 
No such file or directory]
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.16.0-1ubuntu1.2
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1401508/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1401508] xserver.devices.txt