[Desktop-packages] [Bug 1310489] Re: xorg.conf overwritten by booting system
@Jeremy: what do you mean by settings? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-drivers-common in Ubuntu. https://bugs.launchpad.net/bugs/1310489 Title: xorg.conf overwritten by booting system Status in The Linux Mint Distribution: New Status in ubuntu-drivers-common package in Ubuntu: Fix Released Status in ubuntu-drivers-common source package in Trusty: Fix Released Bug description: Description: Ubuntu 14.04 LTS Release: 14.04 == SRU Request == There is a regression in the gpu-manager that causes it to revert user changes right before the first reboot after enabling the fglrx driver or the nvidia driver on a system with hybrid graphics (Intel+AMD or Intel+NVIDIA). This causes the gpu-manager to remove the current xorg.conf and to switch to Mesa. [Impact] * This regression makes it almost impossible to use binary drivers on systems with hybrid graphics. [Test Case] * Make sure to be using a hybrid system with Intel+AMD or Intel+NVIDIA GPUs. * Make sure that the gpu-manager is not disabled (only necessary if you disabled it manually). * Remove all fglrx and nvidia drivers (keep the nvidia-common and the nvidia-prime packages): sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove nvidia-331 sudo apt-get --purge remove fglrx sudo apt-get --purge remove fglrx-updates * Install ubuntu-drivers-common from trusty-proposed. * Restart the system. * Install the binary driver (either fglrx or nvidia, according to the available discrete GPU), reboot, and check that the binary driver is enabled (attach your /var/log/gpu-manager.log) - Expected: the (AMD or NVIDIA) discrete GPU is enabled. - Bad behavior: the system switches back to the intel driver and the discrete GPU is not used, despite the fact that the system was configured properly. [Regression Potential] * Low. Systems that currently work will keep working as usual, the ones that currently fail should finally work. [Other Info] * N/A - Hello, I am using a notebook with a quadcore AMD A10 and hybrid graficcard AMD/ATI Radeon HD 8650G / AMD/ATI Sun XT Radeon HD 8670A/8670M/8690M. After installing fglrx I generated the xorg.conf in the terminal with 'sudo aticonfig --adapter=all --initial' and it looked pretty good. Up to this point I was able to switch between the cards with the commands 'sudo aticonfig --px-dgpu' for the discrete card and 'sudo aticonfig --px-igpu' for the intigrated card to save power. After rebooting I realized that I was no longer able to switch between the cards and found that the xorg.conf will be overwritten whenever I modified it and reboot the system. The new (by boot) generated xorg.conf contains not the relevant information for switing between the cards. I attached both configuration in one file (xorg.conf.comparison). I will also provide the atisysteminfo-report.txt so far I will find the place where to attach. Edit: I fixed the error -- AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] but it changed not the bug of overwriting the xorg.conf. Regards, Uwe ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8 ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 NonfreeKernelModules: fglrx .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: Unity Date: Mon Apr 21 08:43:29 2014 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: fglrx, 13.350.1, 3.13.0-24-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G] [1002:990b] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1985] Subsystem: Hewlett-Packard Company Device [103c:1985] InstallationDate: Installed on 2014-04-20 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) MachineType: Hewlett-Packard HP Pavilion 17 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=fdcb1eaf-eda9-48ee-9d5b-b44e1fc06687 ro quiet splash vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/26/2013 dmi.bios.vendor: Insyde dmi.bios.version: F.22 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1985 dmi.board.vendor: Hewlett-Packard dmi.board.version: 01.13 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version
[Desktop-packages] [Bug 1241986] Re: Cannot connect to WPA/WPA2, EAP-PEAP, MSCHAPV2 network
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: unity8 (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1241986 Title: Cannot connect to WPA/WPA2, EAP-PEAP, MSCHAPV2 network Status in the base for Ubuntu mobile products: In Progress Status in indicator-network package in Ubuntu: Confirmed Status in network-manager package in Ubuntu: Triaged Status in ubuntu-system-settings package in Ubuntu: Fix Released Status in unity8 package in Ubuntu: Confirmed Bug description: On Ubuntu for Phones final image on mako I can see a network but cannot connect because I never get prompted for the username/password. https://wiki.ubuntu.com/Networking#wi-fi-authentication-variations: In both the ‘Connect to “{network name}”’ and “Connect to Hidden Network” dialogs, the contents of the dialog, and the behavior of the “Connect” button, should vary depending on the security and authentication methods... To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1241986/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1455097] Re: pm-suspend no longer run since upgrade to vivid
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: grub2 (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pm-utils in Ubuntu. https://bugs.launchpad.net/bugs/1455097 Title: pm-suspend no longer run since upgrade to vivid Status in grub2 package in Ubuntu: Confirmed Status in pm-utils package in Ubuntu: Confirmed Status in unattended-upgrades package in Ubuntu: Confirmed Bug description: I added a new script in /etc/pm/sleep.d/ that worked fine before the upgrade to vivid. I was wondering why it doesn't work and I find out that /var/log/pm-suspend.log is empty, and pm-powersave.log too (last logs from pm-suspend were on Apr 28, when I upgraded from utopic to vivid. The laptop suspends and wakes fine, it just seems that no pm scripts are run after suspend/powersave. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3 Uname: Linux 3.19.0-16-generic x86_64 ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Thu May 14 15:36:26 2015 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 EcryptfsInUse: Yes InstallationDate: Installed on 2013-03-12 (792 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120703-15:08 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1455097/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1327910] Re: gnome-disks should display a copyable disk UUID
Upstream bug report: https://bugzilla.gnome.org/show_bug.cgi?id=752121 ** Bug watch added: GNOME Bug Tracker #752121 https://bugzilla.gnome.org/show_bug.cgi?id=752121 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-disk-utility in Ubuntu. https://bugs.launchpad.net/bugs/1327910 Title: gnome-disks should display a copyable disk UUID Status in gnome-disk-utility package in Ubuntu: Confirmed Bug description: I needed to get the UUID of my swap partition (to compare and/or supply it to the `swapon` command). So I ran Ubuntu `disks`. When I click my swap partition, Disks shows some useful info about the partition (which I can copy, yay, but only field-by-field, boo!). But the panel doesn't show the device UUID. It should. As a poor workaround, if I choose gears icon Edit partition, the dialog has a Type drop-down with Linux Swap (0657fblah-blah-blah) in it. But I can't copy that, so I have to retype it, which is silly on a computer. The advanced workaround is to root around in /dev/disk/by-ThisAndThat. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: gnome-disk-utility 3.10.0-1ubuntu3 ProcVersionSignature: Ubuntu 3.13.0-29.53-generic 3.13.11.2 Uname: Linux 3.13.0-29-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 CurrentDesktop: Unity Date: Sun Jun 8 15:33:02 2014 InstallationDate: Installed on 2014-04-27 (42 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: gnome-disk-utility UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-disk-utility/+bug/1327910/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472523] Re: logical AND with Constant is not logically correct
The attachment libmng_pixels.patch seems to be a patch. If it isn't, please remove the patch flag from the attachment, remove the patch tag, and if you are a member of the ~ubuntu-reviewers, unsubscribe the team. [This is an automated message performed by a Launchpad user owned by ~brian-murray, for any issues please contact him.] ** Tags added: patch -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libmng in Ubuntu. https://bugs.launchpad.net/bugs/1472523 Title: logical AND with Constant is not logically correct Status in libmng package in Ubuntu: New Bug description: libmng version: 2.0.3 In file libmng_pixels.c, there are many functions; those are performing bit format conversion (8bit format to 16 bit, 16bit to 8bit etc.). For format conversion function are doing logical ANDing with Constant that is not logically correct. e.g. At #15692: *(pDstline+1) = (mng_uint8)(iR 0xFF); In above example due to Logical ANDing() in place of bitwise ANDing() there is a loss of information stored in LSB’s of iR. Now, Replaced logical ANDing operator () with bitwise ANDing operator() After correction: At #15692: *(pDstline+1) = (mng_uint8)(iR 0xFF); Many similar changes are applied in libmng_pixel.c, For detail information please check the attached patch file. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libmng/+bug/1472523/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1467609] Re: vibrations on MSI gt72 2qe scren
This issue only appears with the nvidia driver, not with the nouveau driver. However the nouveau driver does not seem to use the geforce, and has very low graphical performances. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1467609 Title: vibrations on MSI gt72 2qe scren Status in xorg package in Ubuntu: Incomplete Bug description: bought it last week, GPU is NVidia Ge Force 980M. With nouveau installed I only use the small intel chipset ; I installed nvidia 352 from their site, and it works good for the external screen I have but now the integrated screen has those problems. The description is, like the front of the screen was vibrating. I think a better term could be used, see attached screenshot. As you can notice, lines are shifted to left/right on several positions of the screen. It makes the use of the screen very unpleasant. So I usually switch it off. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015 GCC version: gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Mon Jun 22 18:40:33 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu DkmsStatus: bbswitch, 0.7, 3.19.0-15-generic, x86_64: installed bbswitch, 0.7, 3.19.0-21-generic, x86_64: installed nvidia-352, 352.21, 3.19.0-21-generic, x86_64: installed GraphicsCard: NVIDIA Corporation GM204M [GeForce GTX 980M] [10de:13d7] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:1129] InstallationDate: Installed on 2015-06-19 (2 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) MachineType: Micro-Star International Co., Ltd. GT72 2QE ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-21-generic root=UUID=4fabaada-02c5-4230-a634-0b88cf228b5f ro quiet splash SourcePackage: xorg Symptom: display UdevLog: Error: [Errno 2] Aucun fichier ou dossier de ce type: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/21/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1781IMS.10H dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MS-1781 dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: REV:0.C dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10H:bd11/21/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnMicro-StarInternationalCo.,Ltd.:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: GT72 2QE dmi.product.version: REV:0.C dmi.sys.vendor: Micro-Star International Co., Ltd. version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.61+git20150614.97be70b4-0ubuntu0ricotz~vivid version.libgl1-mesa-dri: libgl1-mesa-dri 10.6.0~git20150616+10.6.5d327b37-0ubuntu0ricotz~vivid version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.6.0~git20150616+10.6.5d327b37-0ubuntu0ricotz~vivid version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.99+git20150521.d64a13eb-0ubuntu0ricotz~vivid version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20150528.fb1643f0-0ubuntu0sarvatt~vivid version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11+git20150528.27234dbe-0ubuntu0sarvatt~vivid xserver.bootTime: Mon Jun 22 18:11:59 2015 xserver.configfile: default xserver.errors: open /dev/fb0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.17.1-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1467609/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1467609] Re: vibrations on MSI gt72 2qe scren
** Description changed: - bought it last week, GPU is NVidia Ge Force 980M. - With nouveau installed I only use the small intel chipset ; I installed nvidia 352 from their site, and it works good for the external screen I have but now the integrated screen has those problems. - - The description is, like the front of the screen was vibrating. I think a better term could be used, see attached screenshot. - As you can notice, lines are shifted to left/right on several positions of the screen. - - It makes the use of the screen very unpleasant. So I usually switch it - off. + With the nvidia proprietary drivers (ex. nvidia 352 from their site) it + works good for the external screen I have, but now the integrated screen + is vibrating. I think a better term could be used, see attached + screenshot. As you can notice, lines are shifted to left/right on + several positions of the screen. It makes the use of the screen very + unpleasant. So I usually switch it off. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: - NVRM version: NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015 - GCC version: gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) + NVRM version: NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015 + GCC version: gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Mon Jun 22 18:40:33 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu DkmsStatus: - bbswitch, 0.7, 3.19.0-15-generic, x86_64: installed - bbswitch, 0.7, 3.19.0-21-generic, x86_64: installed - nvidia-352, 352.21, 3.19.0-21-generic, x86_64: installed + bbswitch, 0.7, 3.19.0-15-generic, x86_64: installed + bbswitch, 0.7, 3.19.0-21-generic, x86_64: installed + nvidia-352, 352.21, 3.19.0-21-generic, x86_64: installed GraphicsCard: - NVIDIA Corporation GM204M [GeForce GTX 980M] [10de:13d7] (rev a1) (prog-if 00 [VGA controller]) -Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:1129] + NVIDIA Corporation GM204M [GeForce GTX 980M] [10de:13d7] (rev a1) (prog-if 00 [VGA controller]) + Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:1129] InstallationDate: Installed on 2015-06-19 (2 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) MachineType: Micro-Star International Co., Ltd. GT72 2QE ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-21-generic root=UUID=4fabaada-02c5-4230-a634-0b88cf228b5f ro quiet splash SourcePackage: xorg Symptom: display UdevLog: Error: [Errno 2] Aucun fichier ou dossier de ce type: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/21/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1781IMS.10H dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MS-1781 dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: REV:0.C dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10H:bd11/21/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnMicro-StarInternationalCo.,Ltd.:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: GT72 2QE dmi.product.version: REV:0.C dmi.sys.vendor: Micro-Star International Co., Ltd. version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.61+git20150614.97be70b4-0ubuntu0ricotz~vivid version.libgl1-mesa-dri: libgl1-mesa-dri 10.6.0~git20150616+10.6.5d327b37-0ubuntu0ricotz~vivid version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.6.0~git20150616+10.6.5d327b37-0ubuntu0ricotz~vivid version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.99+git20150521.d64a13eb-0ubuntu0ricotz~vivid version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20150528.fb1643f0-0ubuntu0sarvatt~vivid version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11+git20150528.27234dbe-0ubuntu0sarvatt~vivid xserver.bootTime: Mon Jun 22 18:11:59 2015 xserver.configfile: default xserver.errors: open /dev/fb0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: - + xserver.version:
[Desktop-packages] [Bug 1471114] Re: Can't get network connection
This was also solved with yesterday's 4.0.0-4 kernel release: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1471119/comments/15 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1471114 Title: Can't get network connection Status in network-manager package in Ubuntu: New Bug description: Because I wanted a newer systemd version I tested Wily. However during install I had an issue with my network card. The card was recognized fine but it couldn't establish a network connection. DHCP failed and even when I tried to assign network settings manually I was not successful. lspci lists: 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c) This worked fine in 14.10 und 15.04. ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: ubiquity (not installed) ProcVersionSignature: Ubuntu 3.19.0-22.22-generic 3.19.8-ckt1 Uname: Linux 3.19.0-22-generic x86_64 ApportVersion: 2.17.3-0ubuntu4 Architecture: amd64 CurrentDesktop: KDE Date: Fri Jul 3 08:41:24 2015 InstallCmdLine: BOOT_IMAGE=/vmlinuz-3.19.0-22-generic root=UUID=78220e78-a48e-4add-8268-b84e73d2b2cb ro rootflags=subvol=@ splash quiet pcie_aspm=force nomdmonddf nomdmonisw vt.handoff=7 ProcEnviron: LANGUAGE=en_US:de PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=de_CH.UTF-8 SHELL=/bin/bash SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1471114/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1455097] Re: pm-suspend no longer run since upgrade to vivid
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: unattended-upgrades (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pm-utils in Ubuntu. https://bugs.launchpad.net/bugs/1455097 Title: pm-suspend no longer run since upgrade to vivid Status in grub2 package in Ubuntu: Confirmed Status in pm-utils package in Ubuntu: Confirmed Status in unattended-upgrades package in Ubuntu: Confirmed Bug description: I added a new script in /etc/pm/sleep.d/ that worked fine before the upgrade to vivid. I was wondering why it doesn't work and I find out that /var/log/pm-suspend.log is empty, and pm-powersave.log too (last logs from pm-suspend were on Apr 28, when I upgraded from utopic to vivid. The laptop suspends and wakes fine, it just seems that no pm scripts are run after suspend/powersave. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: pm-utils 1.4.1-15 ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3 Uname: Linux 3.19.0-16-generic x86_64 ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity Date: Thu May 14 15:36:26 2015 DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-precise-amd64-20120703-2 EcryptfsInUse: Yes InstallationDate: Installed on 2013-03-12 (792 days ago) InstallationMedia: Ubuntu 12.04 Precise - Build amd64 LIVE Binary 20120703-15:08 PackageArchitecture: all SourcePackage: pm-utils UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1455097/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472598] [NEW] Deja-dup should not propose ssh as storage location when python-paramiko is not installed
Public bug reported: As far as I understand things, duplicity uses paramiko for ssh2 protocol. But python-paramiko is only a suggestion for duplicity package. When the user does not have this package installed on its system, he/she can still select ssh as storage location method in deja-dup. So I guess deja-dup should explicitely depend on python-paramiko, or make ssh option unavailable if the package is not present. Option 2 would be preferred, as the user will get a chance to know something is missing. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: deja-dup 32.0-0ubuntu5 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Wed Jul 8 14:28:27 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2015-02-16 (141 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: deja-dup UpgradeStatus: Upgraded to vivid on 2015-06-05 (32 days ago) ** Affects: deja-dup (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to deja-dup in Ubuntu. https://bugs.launchpad.net/bugs/1472598 Title: Deja-dup should not propose ssh as storage location when python- paramiko is not installed Status in deja-dup package in Ubuntu: New Bug description: As far as I understand things, duplicity uses paramiko for ssh2 protocol. But python-paramiko is only a suggestion for duplicity package. When the user does not have this package installed on its system, he/she can still select ssh as storage location method in deja-dup. So I guess deja-dup should explicitely depend on python-paramiko, or make ssh option unavailable if the package is not present. Option 2 would be preferred, as the user will get a chance to know something is missing. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: deja-dup 32.0-0ubuntu5 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Wed Jul 8 14:28:27 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2015-02-16 (141 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: deja-dup UpgradeStatus: Upgraded to vivid on 2015-06-05 (32 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/deja-dup/+bug/1472598/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1104476] Re: Network manager cannot connect to WPA2/PEAP/MSCHAPv2 network without CA_Certificate
Same on my PC running Vivid (3.19.0-22, BCM4313), both with certificate added and ignored. Thanks for the workaround, though. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager-applet in Ubuntu. https://bugs.launchpad.net/bugs/1104476 Title: Network manager cannot connect to WPA2/PEAP/MSCHAPv2 network without CA_Certificate Status in NetworkManager: Fix Released Status in Release Notes for Ubuntu: Fix Released Status in network-manager-applet package in Ubuntu: Fix Released Status in network-manager-applet source package in Saucy: Won't Fix Status in network-manager-applet source package in Trusty: Fix Released Status in network-manager-applet source package in Utopic: Fix Released Status in Gentoo Linux: Fix Released Status in network-manager package in openSUSE: Confirmed Bug description: SRU Justification: [Impact] When connecting to MPA2/PEAP/MSCHAPv2 wifi networks which do not have a CA Certificate network manager may incorrectly mark the CA certificate as needing verification and fail that verification. [Test Case] Attempt to connect to a WPA2/PEAP/MSCHAPv2 network without CA_Certificate using Network Manager [Regression Potential] This has been fixed in Utopic already and it a backport of an upstream patch. -- === Release Notes Text === When connecting to MPA2/PEAP/MSCHAPv2 wifi networks which do not have a CA Certificate network manager may incorrectly mark the CA certificate as needing verification and fail that verification. See the bug for workarounds. === I can connect to Eduroam in 12.10 and any other previous release, but not in 13.04. I checked, my name and password are correct, all settings are the same as in 12.10. Network properties: security: WPA - WPA2 enterprise authentication: protected EAP (PEAP) CA certificate: none PEAP version: automatic inner autentication: MSCHAPv2 username: (required) password: (required) ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: network-manager 0.9.6.0+git201301021750.e78c3e8-0ubuntu3 ProcVersionSignature: Ubuntu 3.8.0-1.5-generic 3.8.0-rc4 Uname: Linux 3.8.0-1-generic i686 ApportVersion: 2.8-0ubuntu2 Architecture: i386 CasperVersion: 1.330 Date: Thu Jan 24 21:32:25 2013 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IpRoute: default via 192.168.43.1 dev wlan0 proto static 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.149 metric 9 LiveMediaBuild: Ubuntu 13.04 Raring Ringtail - Alpha i386 (20130123) MarkForUpload: True NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-con: NAME UUID TYPE TIMESTAMPTIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH AndroidAP 978da457-563b-4c59-a894-45eb0f74fcb7 802-11-wireless 1359063171 Thu 24 Jan 2013 09:32:51 PM UTCyes no /org/freedesktop/NetworkManager/Settings/2 Wired connection 16703fabc-9519-49bd-a4af-45fbfb7d660e 802-3-ethernet1359062570 Thu 24 Jan 2013 09:22:50 PM UTCyes no /org/freedesktop/NetworkManager/Settings/1 eduroam 00f69a95-4a1b-436c-b462-a284f45fbaa1 802-11-wireless 1359063171 Thu 24 Jan 2013 09:32:51 PM UTCyes no /org/freedesktop/NetworkManager/Settings/0 nmcli-dev: DEVICE TYPE STATE DBUS-PATH wlan0 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernetunavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSIONSTATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.7.0connected enabled enabled enabledenabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1104476/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472573] [NEW] falha no inicio de sessão: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build
Public bug reported: Desconheco os detalhes. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331-uvm 331.113-0ubuntu0.0.4 ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4 Uname: Linux 3.13.0-34-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 DKMSBuildLog: DKMS make.log for nvidia-331-uvm-331.113 for kernel 3.13.0-57-generic (x86_64) Ter Jul 7 09:54:01 BRT 2015 Makefile:216: /var/lib/dkms/nvidia-331/331.113/build/nvidia-modules-common.mk: Arquivo ou diretório não encontrado make: *** Sem regra para processar o alvo `/var/lib/dkms/nvidia-331/331.113/build/nvidia-modules-common.mk'. Pare. DKMSKernelVersion: 3.13.0-57-generic Date: Tue Jul 7 09:54:25 2015 InstallationDate: Installed on 2014-08-18 (323 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) PackageVersion: 331.113-0ubuntu0.0.4 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: nvidia-graphics-drivers-331 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package gnome3-ppa third-party-packages trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu. https://bugs.launchpad.net/bugs/1472573 Title: falha no inicio de sessão: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build Status in nvidia-graphics-drivers-331 package in Ubuntu: New Bug description: Desconheco os detalhes. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331-uvm 331.113-0ubuntu0.0.4 ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4 Uname: Linux 3.13.0-34-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 DKMSBuildLog: DKMS make.log for nvidia-331-uvm-331.113 for kernel 3.13.0-57-generic (x86_64) Ter Jul 7 09:54:01 BRT 2015 Makefile:216: /var/lib/dkms/nvidia-331/331.113/build/nvidia-modules-common.mk: Arquivo ou diretório não encontrado make: *** Sem regra para processar o alvo `/var/lib/dkms/nvidia-331/331.113/build/nvidia-modules-common.mk'. Pare. DKMSKernelVersion: 3.13.0-57-generic Date: Tue Jul 7 09:54:25 2015 InstallationDate: Installed on 2014-08-18 (323 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) PackageVersion: 331.113-0ubuntu0.0.4 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1472573/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1467609] Re: vibrations on MSI gt72 2qe scren
guillaume le louet, just to clarify, does this issue only occur with the upstream nvidia driver, or also with nouveau? I tried the 349.16 free driver instead of 352 but the issue is still the same. Just to clarify, any version of the nvidia driver is not free as in source, but closed and proprietary. ** Tags removed: bios-outdated-310 ** Tags added: bios-outdated-10t ** Changed in: xorg (Ubuntu) Importance: Low = Medium ** Changed in: xorg (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1467609 Title: vibrations on MSI gt72 2qe scren Status in xorg package in Ubuntu: Incomplete Bug description: bought it last week, GPU is NVidia Ge Force 980M. With nouveau installed I only use the small intel chipset ; I installed nvidia 352 from their site, and it works good for the external screen I have but now the integrated screen has those problems. The description is, like the front of the screen was vibrating. I think a better term could be used, see attached screenshot. As you can notice, lines are shifted to left/right on several positions of the screen. It makes the use of the screen very unpleasant. So I usually switch it off. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015 GCC version: gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Mon Jun 22 18:40:33 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu DkmsStatus: bbswitch, 0.7, 3.19.0-15-generic, x86_64: installed bbswitch, 0.7, 3.19.0-21-generic, x86_64: installed nvidia-352, 352.21, 3.19.0-21-generic, x86_64: installed GraphicsCard: NVIDIA Corporation GM204M [GeForce GTX 980M] [10de:13d7] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:1129] InstallationDate: Installed on 2015-06-19 (2 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) MachineType: Micro-Star International Co., Ltd. GT72 2QE ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-21-generic root=UUID=4fabaada-02c5-4230-a634-0b88cf228b5f ro quiet splash SourcePackage: xorg Symptom: display UdevLog: Error: [Errno 2] Aucun fichier ou dossier de ce type: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/21/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1781IMS.10H dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MS-1781 dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: REV:0.C dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10H:bd11/21/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnMicro-StarInternationalCo.,Ltd.:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: GT72 2QE dmi.product.version: REV:0.C dmi.sys.vendor: Micro-Star International Co., Ltd. version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.61+git20150614.97be70b4-0ubuntu0ricotz~vivid version.libgl1-mesa-dri: libgl1-mesa-dri 10.6.0~git20150616+10.6.5d327b37-0ubuntu0ricotz~vivid version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.6.0~git20150616+10.6.5d327b37-0ubuntu0ricotz~vivid version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.99+git20150521.d64a13eb-0ubuntu0ricotz~vivid version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20150528.fb1643f0-0ubuntu0sarvatt~vivid version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11+git20150528.27234dbe-0ubuntu0sarvatt~vivid xserver.bootTime: Mon Jun 22 18:11:59 2015 xserver.configfile: default xserver.errors: open /dev/fb0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.17.1-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1467609/+subscriptions -- Mailing list:
[Desktop-packages] [Bug 1467609] Re: vibrations on MSI gt72 2qe scren
guillaume le louet, just to clarify, have you used any of the Ubuntu repository (not upstream downloaded from nvidia.com) nvidia drivers? If so, which one(s) specifically? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1467609 Title: vibrations on MSI gt72 2qe scren Status in xorg package in Ubuntu: Incomplete Bug description: With the nvidia proprietary drivers (ex. nvidia 352 from their site) it works good for the external screen I have, but now the integrated screen is vibrating. I think a better term could be used, see attached screenshot. As you can notice, lines are shifted to left/right on several positions of the screen. It makes the use of the screen very unpleasant. So I usually switch it off. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015 GCC version: gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Mon Jun 22 18:40:33 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu DkmsStatus: bbswitch, 0.7, 3.19.0-15-generic, x86_64: installed bbswitch, 0.7, 3.19.0-21-generic, x86_64: installed nvidia-352, 352.21, 3.19.0-21-generic, x86_64: installed GraphicsCard: NVIDIA Corporation GM204M [GeForce GTX 980M] [10de:13d7] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:1129] InstallationDate: Installed on 2015-06-19 (2 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) MachineType: Micro-Star International Co., Ltd. GT72 2QE ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-21-generic root=UUID=4fabaada-02c5-4230-a634-0b88cf228b5f ro quiet splash SourcePackage: xorg Symptom: display UdevLog: Error: [Errno 2] Aucun fichier ou dossier de ce type: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/21/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1781IMS.10H dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MS-1781 dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: REV:0.C dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1781IMS.10H:bd11/21/2014:svnMicro-StarInternationalCo.,Ltd.:pnGT722QE:pvrREV0.C:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1781:rvrREV0.C:cvnMicro-StarInternationalCo.,Ltd.:ct10:cvrToBeFilledByO.E.M.: dmi.product.name: GT72 2QE dmi.product.version: REV:0.C dmi.sys.vendor: Micro-Star International Co., Ltd. version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.61+git20150614.97be70b4-0ubuntu0ricotz~vivid version.libgl1-mesa-dri: libgl1-mesa-dri 10.6.0~git20150616+10.6.5d327b37-0ubuntu0ricotz~vivid version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.6.0~git20150616+10.6.5d327b37-0ubuntu0ricotz~vivid version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.99+git20150521.d64a13eb-0ubuntu0ricotz~vivid version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20150528.fb1643f0-0ubuntu0sarvatt~vivid version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11+git20150528.27234dbe-0ubuntu0sarvatt~vivid xserver.bootTime: Mon Jun 22 18:11:59 2015 xserver.configfile: default xserver.errors: open /dev/fb0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.17.1-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1467609/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1471029] Re: ELF programs with R_386_RELATIVE blocks are badly mapped into memory
Let's keep a task for xlstproc to track it. ** Also affects: libxslt (Ubuntu) Importance: Undecided Status: New ** Changed in: libxslt (Ubuntu) Status: New = Triaged -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libxslt in Ubuntu. https://bugs.launchpad.net/bugs/1471029 Title: ELF programs with R_386_RELATIVE blocks are badly mapped into memory Status in glibc package in Ubuntu: New Status in libxslt package in Ubuntu: Triaged Bug description: Running the Samba autobuild tests on a 15.04 openstack image results in a segfault in this command: /usr/bin/xsltproc --nonet -o default/docs-xml/manpages/smb.conf.5 /home/ubuntu/autobuild/b22271/samba/docs-xml/xslt/man.xsl default /docs-xml/manpages/smb.conf.5.xml I reported this upstream as a bug in xsltproc, but it was found to be impossible to reproduce using upstream source on the openstack instance: https://bugzilla.gnome.org/show_bug.cgi?id=751764 Comment 8 (https://bugzilla.gnome.org/show_bug.cgi?id=751764#c8) is particularly informative. The stack trace below shows the segfault actually occurs in libxml's xpath evaluation functions. I see no difference between xpath.c in upstream 2.9.2 and Ubuntu's version. (gdb) bt 12 #0 0xb760f874 in xmlXPathCompOpEval (ctxt=0xba25d3e8, op=0xb86bc818) at ../../xpath.c:13606 #1 0xb760f82e in xmlXPathCompOpEval (ctxt=0xba25d3e8, op=0xb86bc890) at ../../xpath.c:13598 #2 0xb7610244 in xmlXPathCompOpEval (ctxt=0xba25d3e8, op=0xb86bc8b8) at ../../xpath.c:13529 #3 0xb760f9d6 in xmlXPathCompOpEval (ctxt=0xba25d3e8, op=0xb86bc8e0) at ../../xpath.c:13977 #4 0xb7612735 in xmlXPathCompOpEval (op=optimized out, ctxt=0xba25d3e8) at ../../xpath.c:14552 #5 xmlXPathRunEval (ctxt=0xba25d3e8, toBool=optimized out) at ../../xpath.c:14552 #6 0xb76171ed in xmlXPathCompiledEvalInternal (toBool=0, resObj=synthetic pointer, ctxt=optimized out, comp=optimized out) at ../../xpath.c:14915 #7 xmlXPathCompiledEval__internal_alias (comp=0xb866a948, ctx=0xb99bd308) at ../../xpath.c:14978 #8 0xb7787260 in xsltEvalVariable (ctxt=ctxt@entry=0xb9836560, variable=variable@entry=0xba25d3b0, castedComp=0xb86a4238) at ../../../libxslt/variables.c:903 #9 0xb778759a in xsltBuildVariable (ctxt=0xb9836560, castedComp=0xb86a4238, tree=0xb86a6978) at ../../../libxslt/variables.c:1759 #10 0xb7788bfa in xsltParseStylesheetCallerParam (ctxt=0xb86a6978, inst=0xb86a6978) at ../../../libxslt/variables.c:1975 #11 0xb779b9db in xsltCallTemplate (ctxt=0xb9836560, node=0xb85efed8, inst=0xb86a6880, castedComp=0xb86a4148) at ../../../libxslt/transform.c:4739 (More stack frames follow...) (gdb) bt -5 #3311 0xb779a7de in xsltProcessOneNode (ctxt=0xb9836560, contextNode=0xb97586a0, withParams=0x0) at ../../../libxslt/transform.c:2097 #3312 0xb779d818 in xsltApplyStylesheetInternal (style=0xba25d3e8, style@entry=0xb85ee200, doc=0xb86bc7f0, doc@entry=0xb97586a0, params=0xb77ed340 params, output=0xb85e13e0 default/docs-xml/manpages/smb.conf.5, profile=0x0, userCtxt=0xb9836560) at ../../../libxslt/transform.c:6159 #3313 0xb779df8d in xsltRunStylesheetUser (style=0xb85ee200, doc=0xb97586a0, params=0xb77ed340 params, output=0xb85e13e0 default/docs-xml/manpages/smb.conf.5, SAX=0x0, IObuf=0x0, profile=0x0, userCtxt=0xb9836560) at ../../../libxslt/transform.c:6449 #3314 0xb77ea12c in xsltProcess (doc=0xb97586a0, cur=0xb85ee200, filename=0xbfd59812 default/docs-xml/manpages/smb.conf.5.xml) at ../../../xsltproc/xsltproc.c:483 #3315 0xb77e9298 in main (argc=6, argv=0xbfd58f94) at ../../../xsltproc/xsltproc.c:903 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glibc/+bug/1471029/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1471708] Re: For skylake system, u-s-d cause a black screen when resume from S3 via Lid Close
** Changed in: unity-settings-daemon (Ubuntu) Status: New = Triaged ** Changed in: unity-settings-daemon (Ubuntu) Importance: Undecided = High ** Changed in: unity-settings-daemon (Ubuntu) Assignee: (unassigned) = Alberto Milone (albertomilone) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1471708 Title: For skylake system, u-s-d cause a black screen when resume from S3 via Lid Close Status in OEM Priority Project: New Status in OEM Priority Project trusty series: New Status in unity-settings-daemon package in Ubuntu: Triaged Bug description: OEM LP private bug: https://bugs.launchpad.net/bugs/1466441 Title: Sometimes system turns a black screen when resume from S3 via Lid Close Summary: Sometimes system turns a black screen when resume from S3 via Lid Close It only has cursor on screen but still can switch to tty1. Failure rate ~ 1/5 Steps: 1. install Ubuntu 14.04.2 3.19+ kernel and boot to OS 2. Close the lid 3. Open the lid 4. check the display status Expected results: System should resume to the log in screen when open the lid Actual results: System sometimes fails to resume back to the log in screen but blackscreen instead. (Failure rate~ 1/5) Details: unity-settings-deamon will call xinput --map-to-output 11 eDP1 at background, and it's being blocked so only cursor will show on screen. 1. Switch to tty1 when this happen 2. Login with user account on tty1. 3. Use DISPLAY=:0 xrandr on commandline you'll see it's being blocked. Since xinput is being blocked for some unknown reason (in gdb it shows polling on xcb_connect_to_fd() in XOpenDisplay() ), a possible workaround is to set a timeout for xinput in u-s-d. === modified file 'plugins/xrandr/gsd-xrandr-manager.c' --- plugins/xrandr/gsd-xrandr-manager.c 2014-06-05 11:56:15 + +++ plugins/xrandr/gsd-xrandr-manager.c 2015-07-01 08:59:56 + @@ -2199,7 +2199,7 @@ if (gnome_rr_output_info_is_active(output)) { g_debug (Mapping touchscreen %d onto output %s, device_id, name); - sprintf (command, xinput --map-to-output %d %s, + sprintf (command, timeout 3s xinput --map-to-output %d %s, device_id, name); status = system (command); } To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1471708/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 416058] Re: Cannot raise windows from Java (toFront) - meta_window_same_application improvement
** Changed in: metacity (Ubuntu) Status: Triaged = Fix Released ** Patch removed: Patch adapted for 2.22 https://bugs.launchpad.net/ubuntu/+source/metacity/+bug/416058/+attachment/671898/+files/416058.patch -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to metacity in Ubuntu. https://bugs.launchpad.net/bugs/416058 Title: Cannot raise windows from Java (toFront) - meta_window_same_application improvement Status in The Metacity Window Manager: Fix Released Status in metacity package in Ubuntu: Fix Released Bug description: Binary package hint: metacity metacity 2.22.0 and others (package metacity 2.22.0-0ubuntu4) Ubuntu 8.04 Hardy Heron and others Gnome bug report: http://bugzilla.gnome.org/show_bug.cgi?id=567528 Java bug report: http://bugs.sun.com/view_bug.do?bug_id=6472274 Java windows cannot be brought to the front of the screen because they are not identified as belonging to the same application by Metacity. Specifically, they do not have the same group. However, they do have the same leader. By expanding the behavior of meta_window_same_application, Java windows can be raised as expected. Yes, this is a bug filed against Java, but it is not likely going to be fixed because: * It works for other window managers, including compiz, which have more advanced criteria for allowing windows to be raised. * The Java spec says that it should move windows to the top, but doesn't have to. There is a simple patch supplied in the linked Gnome bug report (it doesn't work directly for 2.22, but the logic of the change can be used). This patch has not received attention from the Gnome team but is very small and relatively harmless. This should be included in the Ubuntu Metacity package until Gnome takes the change. I don't see any harm in this change, but I also don't have a very intimate understanding of what meta_window_same_application is used for besides window raise behavior. To manage notifications about this bug go to: https://bugs.launchpad.net/metacity/+bug/416058/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472523] Re: logical AND with Constant is not logically correct
** Description changed: - libmng version: 2.0.2 + libmng version: 2.0.3 In file libmng_pixels.c, there are many functions; those are performing bit format conversion (8bit format to 16 bit, 16bit to 8bit etc.). For format conversion function are doing logical ANDing with Constant that is not logically correct. e.g. At #15692: *(pDstline+1) = (mng_uint8)(iR 0xFF); In above example due to Logical ANDing() in place of bitwise ANDing() there is a loss of information stored in LSB’s of iR. - Now, Replaced logical ANDing operator () with bitwise ANDing operator() After correction: At #15692: *(pDstline+1) = (mng_uint8)(iR 0xFF); Many similar changes are applied in libmng_pixel.c, For detail information please check the attached patch file. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libmng in Ubuntu. https://bugs.launchpad.net/bugs/1472523 Title: logical AND with Constant is not logically correct Status in libmng package in Ubuntu: New Bug description: libmng version: 2.0.3 In file libmng_pixels.c, there are many functions; those are performing bit format conversion (8bit format to 16 bit, 16bit to 8bit etc.). For format conversion function are doing logical ANDing with Constant that is not logically correct. e.g. At #15692: *(pDstline+1) = (mng_uint8)(iR 0xFF); In above example due to Logical ANDing() in place of bitwise ANDing() there is a loss of information stored in LSB’s of iR. Now, Replaced logical ANDing operator () with bitwise ANDing operator() After correction: At #15692: *(pDstline+1) = (mng_uint8)(iR 0xFF); Many similar changes are applied in libmng_pixel.c, For detail information please check the attached patch file. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libmng/+bug/1472523/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 774059] Re: Scale by Window group not working
And still exists in 15.04 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to compiz in Ubuntu. https://bugs.launchpad.net/bugs/774059 Title: Scale by Window group not working Status in Compiz: Triaged Status in compiz package in Ubuntu: Confirmed Bug description: Binary package hint: compiz In the compiz scale plugin, the Initiate window picker for window group is not working. Unity panel is able to do it when we click on launcher icon having multiple windows but adding a keybouard shortcut or screen edge does not work. Steps to reproduce: 1. Install Ubuntu 11.04 2. Install CCSM 3. Go to scale plugin, bindings tab set the desired shortcuts for the window picker for window group 4. None of the set shortcuts will work To manage notifications about this bug go to: https://bugs.launchpad.net/compiz/+bug/774059/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472517] [NEW] unity-settings-daemon crashed with SIGSEGV in g_type_check_instance_is_fundamentally_a()
Public bug reported: The settings daemon just crashed (triggered by a ubuntu-device-flash for whatever reason). It seems to be related to the existence of a Wacom tablet connected to my machine. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: unity-settings-daemon 15.04.1+15.04.20150408-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-22.22-generic 3.19.8-ckt1 Uname: Linux 3.19.0-22-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Wed Jul 8 09:53:32 2015 ExecutablePath: /usr/lib/unity-settings-daemon/unity-settings-daemon ExecutableTimestamp: 1428504897 ProcCmdline: /usr/lib/unity-settings-daemon/unity-settings-daemon ProcCwd: /home/michal RetraceOutdatedPackages: no debug symbol package found for libharfbuzz0b no debug symbol package found for libflac8 no debug symbol package found for libupower-glib3 no debug symbol package found for libthai0 no debug symbol package found for libxkbcommon0 SegvAnalysis: Segfault happened at: 0x7efe5aa23425 g_type_check_instance_is_fundamentally_a+5: mov(%rdi),%rax PC (0x7efe5aa23425) ok source (%rdi) (0x0001) not located in a known VMA region (needed readable region)! destination %rax ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: unity-settings-daemon StacktraceTop: g_type_check_instance_is_fundamentally_a (type_instance=type_instance@entry=0x1, fundamental_type=fundamental_type@entry=80) at /build/buildd/glib2.0-2.44.1/./gobject/gtype.c:4026 g_object_get (_object=0x1, first_property_name=first_property_name@entry=0x7efe346324d5 device-id) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:2312 get_device_id (device=device@entry=0x135c4b0) at gsd-wacom-manager.c:140 open_device (device=device@entry=0x135c4b0) at gsd-wacom-manager.c:150 set_absolute (device=device@entry=0x135c4b0, is_absolute=1) at gsd-wacom-manager.c:312 Title: unity-settings-daemon crashed with SIGSEGV in g_type_check_instance_is_fundamentally_a() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sbuild sudo vboxusers ** Affects: unity-settings-daemon (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-crash vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1472517 Title: unity-settings-daemon crashed with SIGSEGV in g_type_check_instance_is_fundamentally_a() Status in unity-settings-daemon package in Ubuntu: New Bug description: The settings daemon just crashed (triggered by a ubuntu-device-flash for whatever reason). It seems to be related to the existence of a Wacom tablet connected to my machine. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: unity-settings-daemon 15.04.1+15.04.20150408-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-22.22-generic 3.19.8-ckt1 Uname: Linux 3.19.0-22-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Wed Jul 8 09:53:32 2015 ExecutablePath: /usr/lib/unity-settings-daemon/unity-settings-daemon ExecutableTimestamp: 1428504897 ProcCmdline: /usr/lib/unity-settings-daemon/unity-settings-daemon ProcCwd: /home/michal RetraceOutdatedPackages: no debug symbol package found for libharfbuzz0b no debug symbol package found for libflac8 no debug symbol package found for libupower-glib3 no debug symbol package found for libthai0 no debug symbol package found for libxkbcommon0 SegvAnalysis: Segfault happened at: 0x7efe5aa23425 g_type_check_instance_is_fundamentally_a+5: mov(%rdi),%rax PC (0x7efe5aa23425) ok source (%rdi) (0x0001) not located in a known VMA region (needed readable region)! destination %rax ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: unity-settings-daemon StacktraceTop: g_type_check_instance_is_fundamentally_a (type_instance=type_instance@entry=0x1, fundamental_type=fundamental_type@entry=80) at /build/buildd/glib2.0-2.44.1/./gobject/gtype.c:4026 g_object_get (_object=0x1, first_property_name=first_property_name@entry=0x7efe346324d5 device-id) at /build/buildd/glib2.0-2.44.1/./gobject/gobject.c:2312 get_device_id (device=device@entry=0x135c4b0) at gsd-wacom-manager.c:140 open_device (device=device@entry=0x135c4b0) at gsd-wacom-manager.c:150 set_absolute (device=device@entry=0x135c4b0, is_absolute=1) at gsd-wacom-manager.c:312 Title: unity-settings-daemon crashed with SIGSEGV in g_type_check_instance_is_fundamentally_a() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sbuild sudo vboxusers To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-settings-daemon/+bug/1472517/+subscriptions -- Mailing list:
[Desktop-packages] [Bug 1241986] Re: Cannot connect to WPA/WPA2, EAP-PEAP, MSCHAPV2 network
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: indicator-network (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1241986 Title: Cannot connect to WPA/WPA2, EAP-PEAP, MSCHAPV2 network Status in the base for Ubuntu mobile products: In Progress Status in indicator-network package in Ubuntu: Confirmed Status in network-manager package in Ubuntu: Triaged Status in ubuntu-system-settings package in Ubuntu: Fix Released Status in unity8 package in Ubuntu: Confirmed Bug description: On Ubuntu for Phones final image on mako I can see a network but cannot connect because I never get prompted for the username/password. https://wiki.ubuntu.com/Networking#wi-fi-authentication-variations: In both the ‘Connect to “{network name}”’ and “Connect to Hidden Network” dialogs, the contents of the dialog, and the behavior of the “Connect” button, should vary depending on the security and authentication methods... To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1241986/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472523] [NEW] logical AND with Constant is not logically correct
Public bug reported: libmng version: 2.0.2 In file libmng_pixels.c, there are many functions; those are performing bit format conversion (8bit format to 16 bit, 16bit to 8bit etc.). For format conversion function are doing logical ANDing with Constant that is not logically correct. e.g. At #15692: *(pDstline+1) = (mng_uint8)(iR 0xFF); In above example due to Logical ANDing() in place of bitwise ANDing() there is a loss of information stored in LSB’s of iR. Now, Replaced logical ANDing operator () with bitwise ANDing operator() After correction: At #15692: *(pDstline+1) = (mng_uint8)(iR 0xFF); Many similar changes are applied in libmng_pixel.c, For detail information please check the attached patch file. ** Affects: libmng (Ubuntu) Importance: Undecided Status: New ** Patch added: libmng_pixels.patch https://bugs.launchpad.net/bugs/1472523/+attachment/4426207/+files/libmng_pixels.patch -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libmng in Ubuntu. https://bugs.launchpad.net/bugs/1472523 Title: logical AND with Constant is not logically correct Status in libmng package in Ubuntu: New Bug description: libmng version: 2.0.2 In file libmng_pixels.c, there are many functions; those are performing bit format conversion (8bit format to 16 bit, 16bit to 8bit etc.). For format conversion function are doing logical ANDing with Constant that is not logically correct. e.g. At #15692: *(pDstline+1) = (mng_uint8)(iR 0xFF); In above example due to Logical ANDing() in place of bitwise ANDing() there is a loss of information stored in LSB’s of iR. Now, Replaced logical ANDing operator () with bitwise ANDing operator() After correction: At #15692: *(pDstline+1) = (mng_uint8)(iR 0xFF); Many similar changes are applied in libmng_pixel.c, For detail information please check the attached patch file. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libmng/+bug/1472523/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1389336] Re: Use geoclue-2.0
Any progress on this? It's better to finish all porting before 15.10 is released. ** Tags added: wily -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to qtlocation-opensource-src in Ubuntu. https://bugs.launchpad.net/bugs/1389336 Title: Use geoclue-2.0 Status in empathy package in Ubuntu: New Status in gnome-settings-daemon package in Ubuntu: Fix Released Status in libunity-webapps package in Ubuntu: New Status in qtlocation-opensource-src package in Ubuntu: New Status in ubuntu-geoip package in Ubuntu: New Status in webkitgtk package in Ubuntu: New Bug description: Geoclue2 (source package geoclue-2.0) is a separate, parallel- installable version of geoclue1 (source package geoclue). We will likely shortly have both in main (see MIR bug 1388294) and it would be great to be able to demote geoclue1 to universe and only support one version of the service. The packages associated with this bug all have a reverse depends on geoclue1 in some form or patches to remove support for geoclue-2.0 because it wasn't in main yet (e.g. gnome-settings-daemon). Porting from geoclue-1.0 to 2.0 apparently isn't terribly trivial. But we have at least six months to do it. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/1389336/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1468027] Re: change default CJK fonts to Noto CJK
Hi Nobuto Murata, Actually i think that fonts-takao is one of the best Japanese out there.but when its compared to fonts-noto, noto provides more weights, better CJK fonts support with multilingual, and personally, better monospace fonts paring bwtween English letters and CJK fonts, better e-reading experience with unified fonts design. here are some links that they discussed about changing Fedora's Chinese fonts(in Chinese): https://lists.stg.fedoraproject.org/archives/list/chinese%40lists.fedoraproject.org/thread/ATEHR3KTVLOL5WSXV2HZ4BAPPKDELXNF/ https://lists.stg.fedoraproject.org/archives/list/chin...@lists.fedoraproject.org/thread/ABGCWMJK7BDJD6QDZ4UFCHLVJXCCFV7T/ i apologize about uncertain F13 info i posted. its nothing to do with language-selector. i will edit the description. And for those applications lacking locl GSUB feature and lang tagging, setting font family for per locale would be necessary. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1468027 Title: change default CJK fonts to Noto CJK Status in fonts-noto package in Ubuntu: New Status in language-selector package in Ubuntu: New Status in ubuntu-meta package in Ubuntu: New Bug description: just realize that fonts-noto-cjk is available in the repository, finally its packaged. i don't really know about korean community. But for Chinese and Japanese community, i think that the answer is clear. noto-cjk is definitely better what we had before, like fonts- wqy and fonts-droid. Android community had received these complains for years, finally they got them fixed on lollipop. Fedora also set it as default chinese font start from F21. and of course, i still hope that ubuntu could drop those 69-language-selector fontconfig files, just like what F13 did. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fonts-noto/+bug/1468027/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1436330] Re: Network Manager doesn't set metric for local networks any more, causing connection issues
Le 2015-07-03 00:09, Mathieu Trudel-Lapierre a écrit : My understanding was that there would be packet loss all the time without the patches applied, due to packets being sent in a round-robin fashion between two links to the same default gateway. This said, I'm able to reproduce the apparent packet loss, but I say apparent here because it seems to be an issue with ping (or, the kernel does something special, doesn't understand packets coming in to an interface it doesn't expect perhaps), not with the actual packets. I've been able to observe traffic going out to my default gateway and coming back, with no interruption, using tcpdump: sudo tcpdump -i any icmp I don't think at this point we're working with anything different from how it was in Trusty, but just to be on the safe side I'll test that out to confirm we did get the same behavior. I actually use pppoe now as a walk around the problem and my internet connection works fines without network-manager so i remove it. Ghislain Laframboise -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1436330 Title: Network Manager doesn't set metric for local networks any more, causing connection issues Status in NetworkManager: Fix Released Status in network-manager package in Ubuntu: In Progress Status in network-manager source package in Vivid: Triaged Bug description: [Impact] NM changed its method of setting routes on systems, and no longer attaches a metric value specific to the type of device being used. These values were used to prioritize connections, so that for example, when connected to both wired and wireless at the same time, wired can be used in priority over wireless without incurring packet loss. Currently, when connected to both wired and wireless are connected to the same subnet, the user may notice connectivity issues since packets are sent in a round-robin fashion over all default routes on the same subnet with the same metric. [Test Case] 1- Connect to a wireless network. 2- Connect to the same network over Ethernet both connections should come up on the same subnet. 3- Make sure there is no packet loss, and that there are specific metric values for each default route, as displayed by 'ip route'. [Regression Potential] Since handling default routes properly involves correcting the behavior for all device types, VPN behavior may change to pick up the default routes in all cases, over a wired connection. It's also possible that a connection pick up the default route when it is not meant to. --- With Vivid, having two connections to the same network subnet is unstable due to missing metrics for local networks. Example: Being connected to 192.168.1.0/24 via both wired and wireless will cause connectivity issues as sent packets hop between the two interfaces. It used to be that this wasn't an issue. I would go between work and home and plug in and my machine would automatically connect to wireless and it would use the lower metric ethernet interface for all communications, while the wlan interface would remain connected but unused. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu11 ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1 Uname: Linux 3.19.0-9-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.2-0ubuntu4 Architecture: amd64 CurrentDesktop: KDE Date: Wed Mar 25 09:17:27 2015 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2015-01-25 (58 days ago) InstallationMedia: Kubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2015-03-17 (8 days ago) nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/network-manager/+bug/1436330/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472607] Re: gsettings not sticking for Unity dash search
** Attachment added: Dash_online_search_settings_off.png https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1472607/+attachment/4426341/+files/Dash_online_search_settings_off.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1472607 Title: gsettings not sticking for Unity dash search Status in glib2.0 package in Ubuntu: New Bug description: I have recently noticed that when going to System Settings Security Privacy Search, and disabling the online search result option: Dash_online_search_settings_off.png (attached) That after a restart, the option has reset back to its default state: Dash_online_search_settings_on.png (attached) So the only workaround that I have found is to put: /bin/bash -c gsettings set com.canonical.Unity.Lenses remote-content- search 'none' In the startup applications list. But it would be good if the gsetting could just stick, and as this appears to be a bug with the setting not sticking, I am filing this bug report. There is also some talk of this issue here: http://askubuntu.com/questions/645892/how-to-permanantly-turn-off- online-results/ --- OS Information: Description: Ubuntu 15.04 Release: 15.04 Package Information: libglib2.0-bin: Installed: 2.44.1-1ubuntu1 Candidate: 2.44.1-1ubuntu1 Version table: *** 2.44.1-1ubuntu1 0 500 http://gb.archive.ubuntu.com/ubuntu/ vivid-updates/main amd64 Packages 100 /var/lib/dpkg/status 2.44.0-1ubuntu3 0 500 http://gb.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1472607/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472607] Re: gsettings not sticking for Unity dash search
** Attachment added: Dash_online_search_settings_on.png https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1472607/+attachment/4426342/+files/Dash_online_search_settings_on.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1472607 Title: gsettings not sticking for Unity dash search Status in glib2.0 package in Ubuntu: New Bug description: I have recently noticed that when going to System Settings Security Privacy Search, and disabling the online search result option: Dash_online_search_settings_off.png (attached) That after a restart, the option has reset back to its default state: Dash_online_search_settings_on.png (attached) So the only workaround that I have found is to put: /bin/bash -c gsettings set com.canonical.Unity.Lenses remote-content- search 'none' In the startup applications list. But it would be good if the gsetting could just stick, and as this appears to be a bug with the setting not sticking, I am filing this bug report. There is also some talk of this issue here: http://askubuntu.com/questions/645892/how-to-permanantly-turn-off- online-results/ --- OS Information: Description: Ubuntu 15.04 Release: 15.04 Package Information: libglib2.0-bin: Installed: 2.44.1-1ubuntu1 Candidate: 2.44.1-1ubuntu1 Version table: *** 2.44.1-1ubuntu1 0 500 http://gb.archive.ubuntu.com/ubuntu/ vivid-updates/main amd64 Packages 100 /var/lib/dpkg/status 2.44.0-1ubuntu3 0 500 http://gb.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1472607/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1461082] Re: patch - fix crash with long one-line XML documents
This bug was fixed in the package gtksourceview2 - 2.10.5-0ubuntu3.1 --- gtksourceview2 (2.10.5-0ubuntu3.1) precise; urgency=low * fix-invalidate.patch: new patch. Don't invalidate region when text is deleted and engine is disabled. Fixes crash. (LP: #1461082) -- Vlad Orlov mon...@inbox.ru Tue, 02 Jun 2015 14:40:18 +0300 ** Changed in: gtksourceview2 (Ubuntu Precise) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtksourceview2 in Ubuntu. https://bugs.launchpad.net/bugs/1461082 Title: patch - fix crash with long one-line XML documents Status in gtksourceview2 package in Ubuntu: Fix Released Status in gtksourceview2 source package in Precise: Fix Released Status in gtksourceview2 source package in Trusty: Fix Released Status in gtksourceview2 source package in Utopic: Fix Released Status in gtksourceview2 source package in Vivid: Fix Released Status in gtksourceview2 source package in Wily: Fix Released Status in gtksourceview2 package in Debian: Confirmed Bug description: [Impact] When editing a long one-line document with some markup (e.g. XML) with Pluma (or any other editor using gtksourceview2), you cannot delete a selected portion of text because the editor will crash. This has been reported upstream and fixed in [1], but the commit never made it to GTK+2 version of gtksourceview. So, I propose fixing it in current stable Ubuntu releases with the patch which fixes the crash for good. The debdiffs for every stable release are in the attachments below. [Test Case] Steps to reproduce: 1. Open a long one-line XML document (e.g. [2]) with Pluma. Any other editor using gtksourceview2 will also fit I think. 2. Select a portion of text. 3. Press Backspace (or Delete) key. 4. Pluma crashes. The full backtrace is at [3]. If you're running Pluma from the command-line, you'll notice a warning: GtkSourceView-CRITICAL **: Highlighting a single line took too much time, syntax highlighting will be disabled That's the key. The library tries to invalidate the region when text is deleted and the engine is disabled (i.e. syntax highlighting is off). [Regression Potential] After several months of testing the patch in Debian Jessie, I haven't noticed any regressions. [1] https://git.gnome.org/browse/gtksourceview/commit/?id=abef41da8c541c814bf631f69c92e0c431c610ad [2] http://pastebin.com/nNdYzFXE [3] http://pastebin.com/YgDT0iKh To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtksourceview2/+bug/1461082/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1165104] Re: oneconf is only showing the pc you are on in raring and isn't sharing to other machines
Hello Dave, or anyone else affected, Accepted oneconf into trusty-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/oneconf/0.3.7.14.04.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, and change the tag from verification-needed to verification-done. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Changed in: oneconf (Ubuntu Trusty) Status: In Progress = Fix Committed ** Tags added: verification-needed ** Changed in: oneconf (Ubuntu Vivid) Status: In Progress = Fix Committed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to oneconf in Ubuntu. https://bugs.launchpad.net/bugs/1165104 Title: oneconf is only showing the pc you are on in raring and isn't sharing to other machines Status in One Hundred Papercuts: Fix Released Status in oneconf package in Ubuntu: Fix Released Status in oneconf source package in Trusty: Fix Committed Status in oneconf source package in Vivid: Fix Committed Bug description: [Impact] The package synchronization in the Ubuntu Software Center doesn't work, and only the current machine is displayed. [Test Case] At least two computers (or virtual machines) are needed. First, enable software sync in both computers, by opening the Ubuntu Software Center, then clicking File Sync Between Computers in the menu in each computer. Enter your Ubuntu One credentials if asked. Then either use both computers normally for some time (one or two days?) so the package sync occurs naturally, or force the sync to happen in both of them (faster) by running: $ oneconf-query --stop $ oneconf-service --debug (The --debug flag is not necessary, but useful for debugging) Do this for both computers, one at a time. Then open the Software Center and click on the Installed Software tab, or File Sync Between Computers. If all computer are listed, and if clicking on one of them (except the current one) bring up a package comparison, the bug is fixed. If not, you may try to force a sync on both computers one last time and check again, just to be sure. [Regression Potential] Oneconf wasn't working as intended, so there's probably no regression potential. But it suppose it could impact the stability of Oneconf or the Software Center. [Original Report] In Raring I see only the machince I'm on. In the precise box beside it I see a couple of boxes but not this one. Please see the screenshots attached. I have a feeling that some how the sync has broken but I'm not sure what technology it is use on the backend. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: oneconf 0.3.3 ProcVersionSignature: Ubuntu 3.8.0-16.26-generic 3.8.5 Uname: Linux 3.8.0-16-generic x86_64 ApportVersion: 2.9.2-0ubuntu5 Architecture: amd64 Date: Fri Apr 5 18:18:24 2013 InstallationDate: Installed on 2013-04-02 (3 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64 (20130402) MarkForUpload: True PackageArchitecture: all SourcePackage: oneconf UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1165104/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472622] [NEW] Unity doesn't update or freezes contents within application window
Public bug reported: When switching between different application windows there is a chance that the contents of a window just freeze. For me this happens with Firefox quite often, and extremely often when using QtCreator. Once such a window is frozen, scrolling or keyboard input seems to work, but you won't see any effect because the window contents are not updated anymore. You can re-animate such a frozen window again by just resizing it a bit, but it will get stuck again some time later after switching between windows. This bug doesn't happen with openbox or gnome as window manager / compositor. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: unity 7.3.2+15.04.20150420-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-22.22-generic 3.19.8-ckt1 Uname: Linux 3.19.0-22-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 340.76 Thu Jan 22 12:11:08 PST 2015 GCC version: gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CurrentDesktop: Unity Date: Wed Jul 8 15:23:19 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu GraphicsCard: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8343] InstallationDate: Installed on 2014-03-19 (475 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Alpha amd64 (20140319) MachineType: Tarox Prof. Workstation P7Q ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-22-generic root=UUID=403365c1-32ea-4fc9-b389-6a61e48dec7c ro quiet splash SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/02/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0080 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P7Q57-M DO dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev x.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0080:bd08/02/2011:svnTarox:pnProf.WorkstationP7Q:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP7Q57-MDO:rvrRevx.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: Prof. Workstation P7Q dmi.product.version: System Version dmi.sys.vendor: Tarox version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Wed Jul 8 12:50:05 2015 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputLogitech USB-PS/2 Optical Mouse MOUSE, id 8 inputLITEON Technology USB Multimedia Keyboard KEYBOARD, id 9 xserver.errors: open /dev/fb0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.17.1-0ubuntu3 ** Affects: unity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug ubuntu vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1472622 Title: Unity doesn't update or freezes contents within application window Status in unity package in Ubuntu: New Bug description: When switching between different application windows there is a chance that the contents of a window just freeze. For me this happens with Firefox quite often, and extremely often when using QtCreator. Once such a window is frozen, scrolling or keyboard input seems to work, but you won't see any effect because the window contents are not updated anymore. You can re-animate such a frozen window again by just resizing it a bit, but it will get stuck again some time later after switching between windows. This bug doesn't happen with openbox or gnome as window manager / compositor. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: unity 7.3.2+15.04.20150420-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-22.22-generic 3.19.8-ckt1 Uname: Linux 3.19.0-22-generic
[Desktop-packages] [Bug 1471661] Please test proposed package
Hello Alberto, or anyone else affected, Accepted fglrx-installer into trusty-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/fglrx- installer/2:15.200-0ubuntu0.4 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, and change the tag from verification-needed to verification-done. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Also affects: fglrx-installer-updates (Ubuntu) Importance: Undecided Status: New ** Changed in: fglrx-installer-updates (Ubuntu) Status: New = Fix Released ** Changed in: fglrx-installer-updates (Ubuntu Trusty) Status: New = Fix Committed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1471661 Title: [SRU] Regressions in the -core packages split Status in fglrx-installer package in Ubuntu: Fix Released Status in fglrx-installer-updates package in Ubuntu: Fix Released Status in fglrx-installer source package in Trusty: Fix Committed Status in fglrx-installer-updates source package in Trusty: Fix Committed Status in fglrx-installer source package in Vivid: Fix Committed Status in fglrx-installer-updates source package in Vivid: Fix Committed Bug description: [Impact] As per the topic, a couple of regressions were introduced as part of the work on the core package split. This can cause build issues with the packages missing files. The problem is fixed upstream. [Test Case] Install the new packages and check that the amdcccle panel can be launched. [Regression Potential] Low, the patches come from upstream and are already included wily. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1471661/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1471661] Please test proposed package
Hello Alberto, or anyone else affected, Accepted fglrx-installer-updates into vivid-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source /fglrx-installer-updates/2:15.200-0ubuntu4.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, and change the tag from verification-needed to verification-done. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1471661 Title: [SRU] Regressions in the -core packages split Status in fglrx-installer package in Ubuntu: Fix Released Status in fglrx-installer-updates package in Ubuntu: Fix Released Status in fglrx-installer source package in Trusty: Fix Committed Status in fglrx-installer-updates source package in Trusty: Fix Committed Status in fglrx-installer source package in Vivid: Fix Committed Status in fglrx-installer-updates source package in Vivid: Fix Committed Bug description: [Impact] As per the topic, a couple of regressions were introduced as part of the work on the core package split. This can cause build issues with the packages missing files. The problem is fixed upstream. [Test Case] Install the new packages and check that the amdcccle panel can be launched. [Regression Potential] Low, the patches come from upstream and are already included wily. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1471661/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1471661] Please test proposed package
Hello Alberto, or anyone else affected, Accepted fglrx-installer-updates into trusty-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source /fglrx-installer-updates/2:15.200-0ubuntu0.4 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, and change the tag from verification-needed to verification-done. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Changed in: fglrx-installer-updates (Ubuntu Vivid) Status: New = Fix Committed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1471661 Title: [SRU] Regressions in the -core packages split Status in fglrx-installer package in Ubuntu: Fix Released Status in fglrx-installer-updates package in Ubuntu: Fix Released Status in fglrx-installer source package in Trusty: Fix Committed Status in fglrx-installer-updates source package in Trusty: Fix Committed Status in fglrx-installer source package in Vivid: Fix Committed Status in fglrx-installer-updates source package in Vivid: Fix Committed Bug description: [Impact] As per the topic, a couple of regressions were introduced as part of the work on the core package split. This can cause build issues with the packages missing files. The problem is fixed upstream. [Test Case] Install the new packages and check that the amdcccle panel can be launched. [Regression Potential] Low, the patches come from upstream and are already included wily. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1471661/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1471661] Re: [SRU] Regressions in the -core packages split
Hello Alberto, or anyone else affected, Accepted fglrx-installer into vivid-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/fglrx- installer/2:15.200-0ubuntu4.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, and change the tag from verification-needed to verification-done. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Changed in: fglrx-installer (Ubuntu Vivid) Status: In Progress = Fix Committed ** Tags added: verification-needed ** Changed in: fglrx-installer (Ubuntu Trusty) Status: In Progress = Fix Committed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to fglrx-installer in Ubuntu. https://bugs.launchpad.net/bugs/1471661 Title: [SRU] Regressions in the -core packages split Status in fglrx-installer package in Ubuntu: Fix Released Status in fglrx-installer-updates package in Ubuntu: Fix Released Status in fglrx-installer source package in Trusty: Fix Committed Status in fglrx-installer-updates source package in Trusty: Fix Committed Status in fglrx-installer source package in Vivid: Fix Committed Status in fglrx-installer-updates source package in Vivid: Fix Committed Bug description: [Impact] As per the topic, a couple of regressions were introduced as part of the work on the core package split. This can cause build issues with the packages missing files. The problem is fixed upstream. [Test Case] Install the new packages and check that the amdcccle panel can be launched. [Regression Potential] Low, the patches come from upstream and are already included wily. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1471661/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472607] [NEW] gsettings not sticking for Unity dash search
Public bug reported: I have recently noticed that when going to System Settings Security Privacy Search, and disabling the online search result option: Dash_online_search_settings_off.png (attached) That after a restart, the option has reset back to its default state: Dash_online_search_settings_on.png (attached) So the only workaround that I have found is to put: /bin/bash -c gsettings set com.canonical.Unity.Lenses remote-content- search 'none' In the startup applications list. But it would be good if the gsetting could just stick, and as this appears to be a bug with the setting not sticking, I am filing this bug report. There is also some talk of this issue here: http://askubuntu.com/questions/645892/how-to-permanantly-turn-off- online-results/ --- OS Information: Description:Ubuntu 15.04 Release:15.04 Package Information: libglib2.0-bin: Installed: 2.44.1-1ubuntu1 Candidate: 2.44.1-1ubuntu1 Version table: *** 2.44.1-1ubuntu1 0 500 http://gb.archive.ubuntu.com/ubuntu/ vivid-updates/main amd64 Packages 100 /var/lib/dpkg/status 2.44.0-1ubuntu3 0 500 http://gb.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages ** Affects: glib2.0 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to glib2.0 in Ubuntu. https://bugs.launchpad.net/bugs/1472607 Title: gsettings not sticking for Unity dash search Status in glib2.0 package in Ubuntu: New Bug description: I have recently noticed that when going to System Settings Security Privacy Search, and disabling the online search result option: Dash_online_search_settings_off.png (attached) That after a restart, the option has reset back to its default state: Dash_online_search_settings_on.png (attached) So the only workaround that I have found is to put: /bin/bash -c gsettings set com.canonical.Unity.Lenses remote-content- search 'none' In the startup applications list. But it would be good if the gsetting could just stick, and as this appears to be a bug with the setting not sticking, I am filing this bug report. There is also some talk of this issue here: http://askubuntu.com/questions/645892/how-to-permanantly-turn-off- online-results/ --- OS Information: Description: Ubuntu 15.04 Release: 15.04 Package Information: libglib2.0-bin: Installed: 2.44.1-1ubuntu1 Candidate: 2.44.1-1ubuntu1 Version table: *** 2.44.1-1ubuntu1 0 500 http://gb.archive.ubuntu.com/ubuntu/ vivid-updates/main amd64 Packages 100 /var/lib/dpkg/status 2.44.0-1ubuntu3 0 500 http://gb.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1472607/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1392887] Re: serial wacom devices gone after upgrade to utopic/14.10
This bug was fixed in the package xf86-input-wacom - 1:0.25.0-0ubuntu1.1 --- xf86-input-wacom (1:0.25.0-0ubuntu1.1) vivid; urgency=medium * rules, install: Fix udev rules and systemd service install destination. (LP: #1392887) -- Timo Aaltonen tjaal...@debian.org Thu, 21 May 2015 08:18:55 +0300 ** Changed in: xf86-input-wacom (Ubuntu Vivid) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xf86-input-wacom in Ubuntu. https://bugs.launchpad.net/bugs/1392887 Title: serial wacom devices gone after upgrade to utopic/14.10 Status in xf86-input-wacom package in Ubuntu: Fix Released Status in xf86-input-wacom-lts-utopic package in Ubuntu: New Status in xf86-input-wacom source package in Trusty: New Status in xf86-input-wacom-lts-utopic source package in Trusty: New Status in xf86-input-wacom source package in Utopic: Fix Released Status in xf86-input-wacom source package in Vivid: Fix Released Status in xf86-input-wacom source package in Wily: Fix Released Bug description: [Impact] udev rules and systemd service file are installed in the wrong path due to assuming that dh_install can rename files, instead it installed the files under the renamed directory [Test case] try to use a serial wacom device, it fails [Regression potential] none, restore original behaviour -- Recently I upgraded ubuntu from 14.04 to 14.10 on my HP EliteBook 2760p. After that, all serial wacom devices (for the touchscreen) are gone: serial wacom stylus serial wacom eraser serial wacom touch xinput -list and xsetwacom --list don't show these devices and the Wacom Tablet section of the system setings reports 'no tablet detected' rather than showing the usual settings. Booting with the old linux 3.13 kernel makes no difference to the new version 3.16. To find out what happened I played around on a spare partition with the following results: 1) fresh installation of 14.10 - result is the same like reported above: no touch devices 2) fresh installation of 14.04 - touch works out of the box 3) upgraded the fresh installation of trusty to utopic: touch devices gone again 4) manually changed repos to utopic after fresh installation of 14.04 and updated ONLY the xserver-xorg-input-wacom package: apt pulled some dependencies and installed without errors, touch devices gone (so it reproduces the error exactly as the full upgrade) WORKAROUND: Replace the udev rule /lib/udev/rules.d/69-wacom.rules/wacom.rules by the old file from Ubuntu 14.04 by putting it in /lib/udev/rules.d/ : https://bugs.launchpad.net/ubuntu/+source/xf86-input-wacom/+bug/1392887/+attachment/4264135/+files/69-xserver-xorg-input-wacom.rules ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xserver-xorg-input-wacom 1:0.25.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: Unity Date: Fri Nov 14 22:51:05 2014 DistUpgraded: 2014-11-01 04:28:11,674 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu InstallationDate: Installed on 2012-10-16 (759 days ago) InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) MachineType: Hewlett-Packard HP EliteBook 2760p ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=81ff9b66-4d33-49d5-a76f-cf1418c3e354 ro quiet splash vt.handoff=7 SourcePackage: xf86-input-wacom UpgradeStatus: Upgraded to utopic on 2014-11-01 (13 days ago) dmi.bios.date: 08/04/2014 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68SOU Ver. F.50 dmi.board.name: 162A dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 05.40 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68SOUVer.F.50:bd08/04/2014:svnHewlett-Packard:pnHPEliteBook2760p:pvrA0005F02:rvnHewlett-Packard:rn162A:rvrKBCVersion05.40:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP EliteBook 2760p dmi.product.version: A0005F02 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Fri Nov 14
[Desktop-packages] [Bug 1392887] Update Released
The verification of the Stable Release Update for xf86-input-wacom has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regressions. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xf86-input-wacom in Ubuntu. https://bugs.launchpad.net/bugs/1392887 Title: serial wacom devices gone after upgrade to utopic/14.10 Status in xf86-input-wacom package in Ubuntu: Fix Released Status in xf86-input-wacom-lts-utopic package in Ubuntu: New Status in xf86-input-wacom source package in Trusty: New Status in xf86-input-wacom-lts-utopic source package in Trusty: New Status in xf86-input-wacom source package in Utopic: Fix Released Status in xf86-input-wacom source package in Vivid: Fix Released Status in xf86-input-wacom source package in Wily: Fix Released Bug description: [Impact] udev rules and systemd service file are installed in the wrong path due to assuming that dh_install can rename files, instead it installed the files under the renamed directory [Test case] try to use a serial wacom device, it fails [Regression potential] none, restore original behaviour -- Recently I upgraded ubuntu from 14.04 to 14.10 on my HP EliteBook 2760p. After that, all serial wacom devices (for the touchscreen) are gone: serial wacom stylus serial wacom eraser serial wacom touch xinput -list and xsetwacom --list don't show these devices and the Wacom Tablet section of the system setings reports 'no tablet detected' rather than showing the usual settings. Booting with the old linux 3.13 kernel makes no difference to the new version 3.16. To find out what happened I played around on a spare partition with the following results: 1) fresh installation of 14.10 - result is the same like reported above: no touch devices 2) fresh installation of 14.04 - touch works out of the box 3) upgraded the fresh installation of trusty to utopic: touch devices gone again 4) manually changed repos to utopic after fresh installation of 14.04 and updated ONLY the xserver-xorg-input-wacom package: apt pulled some dependencies and installed without errors, touch devices gone (so it reproduces the error exactly as the full upgrade) WORKAROUND: Replace the udev rule /lib/udev/rules.d/69-wacom.rules/wacom.rules by the old file from Ubuntu 14.04 by putting it in /lib/udev/rules.d/ : https://bugs.launchpad.net/ubuntu/+source/xf86-input-wacom/+bug/1392887/+attachment/4264135/+files/69-xserver-xorg-input-wacom.rules ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xserver-xorg-input-wacom 1:0.25.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: Unity Date: Fri Nov 14 22:51:05 2014 DistUpgraded: 2014-11-01 04:28:11,674 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu InstallationDate: Installed on 2012-10-16 (759 days ago) InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) MachineType: Hewlett-Packard HP EliteBook 2760p ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=81ff9b66-4d33-49d5-a76f-cf1418c3e354 ro quiet splash vt.handoff=7 SourcePackage: xf86-input-wacom UpgradeStatus: Upgraded to utopic on 2014-11-01 (13 days ago) dmi.bios.date: 08/04/2014 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68SOU Ver. F.50 dmi.board.name: 162A dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 05.40 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68SOUVer.F.50:bd08/04/2014:svnHewlett-Packard:pnHPEliteBook2760p:pvrA0005F02:rvnHewlett-Packard:rn162A:rvrKBCVersion05.40:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP EliteBook 2760p dmi.product.version: A0005F02 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau:
[Desktop-packages] [Bug 1392887] Re: serial wacom devices gone after upgrade to utopic/14.10
This bug was fixed in the package xf86-input-wacom - 1:0.25.0-0ubuntu1.0.1 --- xf86-input-wacom (1:0.25.0-0ubuntu1.0.1) utopic; urgency=medium * rules, install: Fix udev rules and systemd service install destination. (LP: #1392887) -- Timo Aaltonen tjaal...@debian.org Thu, 21 May 2015 08:18:55 +0300 ** Changed in: xf86-input-wacom (Ubuntu Utopic) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xf86-input-wacom in Ubuntu. https://bugs.launchpad.net/bugs/1392887 Title: serial wacom devices gone after upgrade to utopic/14.10 Status in xf86-input-wacom package in Ubuntu: Fix Released Status in xf86-input-wacom-lts-utopic package in Ubuntu: New Status in xf86-input-wacom source package in Trusty: New Status in xf86-input-wacom-lts-utopic source package in Trusty: New Status in xf86-input-wacom source package in Utopic: Fix Released Status in xf86-input-wacom source package in Vivid: Fix Released Status in xf86-input-wacom source package in Wily: Fix Released Bug description: [Impact] udev rules and systemd service file are installed in the wrong path due to assuming that dh_install can rename files, instead it installed the files under the renamed directory [Test case] try to use a serial wacom device, it fails [Regression potential] none, restore original behaviour -- Recently I upgraded ubuntu from 14.04 to 14.10 on my HP EliteBook 2760p. After that, all serial wacom devices (for the touchscreen) are gone: serial wacom stylus serial wacom eraser serial wacom touch xinput -list and xsetwacom --list don't show these devices and the Wacom Tablet section of the system setings reports 'no tablet detected' rather than showing the usual settings. Booting with the old linux 3.13 kernel makes no difference to the new version 3.16. To find out what happened I played around on a spare partition with the following results: 1) fresh installation of 14.10 - result is the same like reported above: no touch devices 2) fresh installation of 14.04 - touch works out of the box 3) upgraded the fresh installation of trusty to utopic: touch devices gone again 4) manually changed repos to utopic after fresh installation of 14.04 and updated ONLY the xserver-xorg-input-wacom package: apt pulled some dependencies and installed without errors, touch devices gone (so it reproduces the error exactly as the full upgrade) WORKAROUND: Replace the udev rule /lib/udev/rules.d/69-wacom.rules/wacom.rules by the old file from Ubuntu 14.04 by putting it in /lib/udev/rules.d/ : https://bugs.launchpad.net/ubuntu/+source/xf86-input-wacom/+bug/1392887/+attachment/4264135/+files/69-xserver-xorg-input-wacom.rules ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xserver-xorg-input-wacom 1:0.25.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4 Uname: Linux 3.16.0-24-generic x86_64 ApportVersion: 2.14.7-0ubuntu8 Architecture: amd64 CurrentDesktop: Unity Date: Fri Nov 14 22:51:05 2014 DistUpgraded: 2014-11-01 04:28:11,674 DEBUG enabling apt cron job DistroCodename: utopic DistroVariant: ubuntu InstallationDate: Installed on 2012-10-16 (759 days ago) InstallationMedia: Ubuntu 12.04.1 LTS Precise Pangolin - Release amd64 (20120823.1) MachineType: Hewlett-Packard HP EliteBook 2760p ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic root=UUID=81ff9b66-4d33-49d5-a76f-cf1418c3e354 ro quiet splash vt.handoff=7 SourcePackage: xf86-input-wacom UpgradeStatus: Upgraded to utopic on 2014-11-01 (13 days ago) dmi.bios.date: 08/04/2014 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68SOU Ver. F.50 dmi.board.name: 162A dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 05.40 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68SOUVer.F.50:bd08/04/2014:svnHewlett-Packard:pnHPEliteBook2760p:pvrA0005F02:rvnHewlett-Packard:rn162A:rvrKBCVersion05.40:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP EliteBook 2760p dmi.product.version: A0005F02 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.0-0ubuntu3 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.0-0ubuntu3 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Fri Nov 14
[Desktop-packages] [Bug 1406802] Re: Vivid Unity Wallpaper horizontally hashed
@ Martin Wimpress It existed upon first boot after an in-place upgrade to 15.04 It existed upon first boot after a nuke and pave upgrade to 15.04 Try this to reproduce this issue with Ubuntu MATE so you can test it, but it is inconsistent. All you have to do is click around in the wallpaper selector frame. I tried different wallpapers, most of the stock Mate ones seem safe usually. It really hates the default Ubuntu-Mate branded one, AND the one you select after that even if it is a safe one. The second safe one selected seems to work. The wallpaper that worked best for me was a Dalek wallpaper from the BBC I downloaded. Bad news for the Doctor I’m afraid... Ubuntu-Mate favours Daleks -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1406802 Title: Vivid Unity Wallpaper horizontally hashed Status in Nautilus: Confirmed Status in Ubuntu MATE: Incomplete Status in nautilus package in Ubuntu: Confirmed Bug description: Standard wallpaper selection distorted badly cut and displaced sideways. See screenshot. Lenovo Desktop Dual processor: processor : 0 vendor_id : GenuineIntel cpu family: 6 model : 23 model name: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz Standard dropdown windows like terminal, internet etc. normal. DISTRIB_RELEASE=15.04 DISTRIB_CODENAME=vivid DISTRIB_DESCRIPTION=Ubuntu Vivid Vervet (development branch) Linux Lenovo2 3.16.0-28-generic #38-Ubuntu SMP Fri Dec 12 17:37:40 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux model name: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz model name: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) jerry@Lenovo2:~$ ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: unity 7.3.1+15.04.20141216-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1 Uname: Linux 3.16.0-28-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.15.1-0ubuntu1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Wed Dec 31 14:06:16 2014 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu GraphicsCard: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Lenovo ThinkCentre M6258 [17aa:3048] Subsystem: Lenovo Device [17aa:3048] InstallationDate: Installed on 2014-10-27 (65 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20141026) ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic root=UUID=81fa31d4-972b-409f-9b0b-d34528ec9238 ro quiet splash vt.handoff=7 SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/10/2011 dmi.bios.vendor: LENOVO dmi.bios.version: 5CKT69AUS dmi.board.name: LENOVO dmi.chassis.vendor: LENOVO dmi.chassis.version: NONE dmi.modalias: dmi:bvnLENOVO:bvr5CKT69AUS:bd01/10/2011:svnLENOVO:pn6234A1U:pvrThinkCentreM58p:rvnLENOVO:rnLENOVO:rvrNONE:cvnLENOVO:ct3:cvrNONE: dmi.product.name: 6234A1U dmi.product.version: ThinkCentre M58p dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.12.0+15.04.20141219-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.58-2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.16.2.901-1ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.916+git20141119-1~exp1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Wed Dec 31 14:04:58 2014 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.16.2.901-1ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/nautilus/+bug/1406802/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1464722] Re: No longer displays most application icons
This bug was fixed in the package software-center - 13.10-0ubuntu6.1 --- software-center (13.10-0ubuntu6.1) vivid; urgency=medium * softwarecenter/ui/gtk3/models/appstore2.py: - GtkIcon has_icon doesn't work in standard directories, use lookup_icon instead, should fix invalid icons being displayed in the packages list (lp: #1464722) * data/ui/gtk3/submit_review.ui: - don't use the gtkbox n_row property, it's deprecated in the newer gtk version, which leads to runtime errors and a non working reviews dialog (lp: #1445745) -- Sebastien Bacher seb...@ubuntu.com Fri, 12 Jun 2015 18:18:05 +0200 ** Changed in: software-center (Ubuntu Vivid) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to software-center in Ubuntu. https://bugs.launchpad.net/bugs/1464722 Title: No longer displays most application icons Status in software-center package in Ubuntu: Fix Released Status in software-center source package in Vivid: Fix Released Bug description: * Impact: Since Ubuntu 15.04, software-center no longer displays the icons for most applications. See attached screenshot. * Test case: look at icons on the main screen, they should be software specific ones, not the default package icon * Regression potentiel watch for icons issues To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1464722/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1445745] Re: Not able to write a review (Unable to show 'none')
This bug was fixed in the package software-center - 13.10-0ubuntu6.1 --- software-center (13.10-0ubuntu6.1) vivid; urgency=medium * softwarecenter/ui/gtk3/models/appstore2.py: - GtkIcon has_icon doesn't work in standard directories, use lookup_icon instead, should fix invalid icons being displayed in the packages list (lp: #1464722) * data/ui/gtk3/submit_review.ui: - don't use the gtkbox n_row property, it's deprecated in the newer gtk version, which leads to runtime errors and a non working reviews dialog (lp: #1445745) -- Sebastien Bacher seb...@ubuntu.com Fri, 12 Jun 2015 18:18:05 +0200 ** Changed in: software-center (Ubuntu Vivid) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to software-center in Ubuntu. https://bugs.launchpad.net/bugs/1445745 Title: Not able to write a review (Unable to show 'none') Status in software-center package in Ubuntu: Fix Released Status in software-center source package in Vivid: Fix Released Bug description: * Impact reviews can't be added anymore * Test case try to write a review for a software * Impact the change is in the review dialog ui, make sure it looks correct I can't write a new review on the Software Center. Xubuntu 15.04 When I click on Write a new review, nothing happens. Launching software-center from the terminal, the attached error appears when I press the Write a new review button. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: software-center 13.10-0ubuntu6 Uname: Linux 4.0.0-04-generic x86_64 ApportVersion: 2.17.1-0ubuntu2 Architecture: amd64 CurrentDesktop: XFCE Date: Sat Apr 18 11:27:14 2015 InstallationDate: Installed on 2015-03-27 (21 days ago) InstallationMedia: Xubuntu 15.04 Vivid Vervet - Beta amd64 (20150326) PackageArchitecture: all SourcePackage: software-center UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1445745/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1426490] Update Released
The verification of the Stable Release Update for cups has completed successfully and the package has now been released to -updates. Subsequently, the Ubuntu Stable Release Updates Team is being unsubscribed and will not receive messages about this bug report. In the event that you encounter a regression using the package from -updates please report a new bug using ubuntu-bug and tag the bug report regression-update so we can easily find any regressions. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1426490 Title: cups 2.0.2-1 100% cpu usage Status in cups package in Ubuntu: Fix Released Status in cups source package in Vivid: Fix Released Bug description: upgraded from xubuntu 14.10 to 15.04 and now it uses cups 2.x after every print cupsd starts using 100% cpu and don't close. have to kill it every time with sudo pkill cupsd printing still works fine [Impact] CUPS 2.0.x can suddenly take 100% CPU in certain situations, making the system slow and producing fan noise. [Test Case] After printing a job cupsd takes 100% CPU. This does not occur for all users, probably depends on queue type and on timing (computer/network speed). With the proposed package the problem does not occur any more. [Regression Potential] Very low. The patch is very simple. Description: Ubuntu Vivid Vervet (development branch) Release: 15.04 cups: Installiert: 2.0.2-1ubuntu3 Installationskandidat: 2.0.2-1ubuntu3 Versionstabelle: *** 2.0.2-1ubuntu3 0 500 http://de.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages 100 /var/lib/dpkg/status To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1426490/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472614] [NEW] Upload progress bar - Feature request
Public bug reported: It would be really useful, if, like in Google Chrome, for there to be some kind of upload progress bar as well as a download progress bar in Firefox. That is so that you would be able to tell the upload progress of something you are uploading, such as a file. ** Affects: firefox (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1472614 Title: Upload progress bar - Feature request Status in firefox package in Ubuntu: New Bug description: It would be really useful, if, like in Google Chrome, for there to be some kind of upload progress bar as well as a download progress bar in Firefox. That is so that you would be able to tell the upload progress of something you are uploading, such as a file. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1472614/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1165104] Please test proposed package
Hello Dave, or anyone else affected, Accepted oneconf into vivid-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/oneconf/0.3.7.15.04.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, and change the tag from verification-needed to verification-done. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to oneconf in Ubuntu. https://bugs.launchpad.net/bugs/1165104 Title: oneconf is only showing the pc you are on in raring and isn't sharing to other machines Status in One Hundred Papercuts: Fix Released Status in oneconf package in Ubuntu: Fix Released Status in oneconf source package in Trusty: Fix Committed Status in oneconf source package in Vivid: Fix Committed Bug description: [Impact] The package synchronization in the Ubuntu Software Center doesn't work, and only the current machine is displayed. [Test Case] At least two computers (or virtual machines) are needed. First, enable software sync in both computers, by opening the Ubuntu Software Center, then clicking File Sync Between Computers in the menu in each computer. Enter your Ubuntu One credentials if asked. Then either use both computers normally for some time (one or two days?) so the package sync occurs naturally, or force the sync to happen in both of them (faster) by running: $ oneconf-query --stop $ oneconf-service --debug (The --debug flag is not necessary, but useful for debugging) Do this for both computers, one at a time. Then open the Software Center and click on the Installed Software tab, or File Sync Between Computers. If all computer are listed, and if clicking on one of them (except the current one) bring up a package comparison, the bug is fixed. If not, you may try to force a sync on both computers one last time and check again, just to be sure. [Regression Potential] Oneconf wasn't working as intended, so there's probably no regression potential. But it suppose it could impact the stability of Oneconf or the Software Center. [Original Report] In Raring I see only the machince I'm on. In the precise box beside it I see a couple of boxes but not this one. Please see the screenshots attached. I have a feeling that some how the sync has broken but I'm not sure what technology it is use on the backend. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: oneconf 0.3.3 ProcVersionSignature: Ubuntu 3.8.0-16.26-generic 3.8.5 Uname: Linux 3.8.0-16-generic x86_64 ApportVersion: 2.9.2-0ubuntu5 Architecture: amd64 Date: Fri Apr 5 18:18:24 2013 InstallationDate: Installed on 2013-04-02 (3 days ago) InstallationMedia: Ubuntu 13.04 Raring Ringtail - Alpha amd64 (20130402) MarkForUpload: True PackageArchitecture: all SourcePackage: oneconf UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1165104/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 882942] Re: NaCL is missing
The very same problem still occurrs, even on 14.10 edition (Utopic). Seriously??? This is certainly not LOW priority, as Chromium is default browser for Ubuntu! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/882942 Title: NaCL is missing Status in chromium-browser package in Ubuntu: Triaged Status in chromium-browser source package in Lucid: Won't Fix Status in chromium-browser source package in Maverick: Invalid Status in chromium-browser source package in Natty: Invalid Status in chromium-browser source package in Oneiric: Invalid Bug description: Even though is was disabled by default, not shipping it is a regression. There are currently some build issues with it enabled in the build. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/882942/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1426490] Re: cups 2.0.2-1 100% cpu usage
This bug was fixed in the package cups - 2.0.2-1ubuntu3.2 --- cups (2.0.2-1ubuntu3.2) vivid-proposed; urgency=medium * debian/patches/cups-busy-loop.patch: Fixed scheduler sometimes getting caught in a busy loop (LP: #1426490, CUPS STR #4605). -- Till Kamppeter till.kamppe...@gmail.com Fri, 12 Jun 2015 13:18:01 -0300 ** Changed in: cups (Ubuntu Vivid) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1426490 Title: cups 2.0.2-1 100% cpu usage Status in cups package in Ubuntu: Fix Released Status in cups source package in Vivid: Fix Released Bug description: upgraded from xubuntu 14.10 to 15.04 and now it uses cups 2.x after every print cupsd starts using 100% cpu and don't close. have to kill it every time with sudo pkill cupsd printing still works fine [Impact] CUPS 2.0.x can suddenly take 100% CPU in certain situations, making the system slow and producing fan noise. [Test Case] After printing a job cupsd takes 100% CPU. This does not occur for all users, probably depends on queue type and on timing (computer/network speed). With the proposed package the problem does not occur any more. [Regression Potential] Very low. The patch is very simple. Description: Ubuntu Vivid Vervet (development branch) Release: 15.04 cups: Installiert: 2.0.2-1ubuntu3 Installationskandidat: 2.0.2-1ubuntu3 Versionstabelle: *** 2.0.2-1ubuntu3 0 500 http://de.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages 100 /var/lib/dpkg/status To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1426490/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 996304] Re: Typo in manpage of 'xdg-icon-resource'
Typo is still present in xdg-utils 1.1.0~rc1-2ubuntu11 on Ubuntu Wily. ** Tags added: trusty utopic vivid wily -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xdg-utils in Ubuntu. https://bugs.launchpad.net/bugs/996304 Title: Typo in manpage of 'xdg-icon-resource' Status in xdg-utils package in Ubuntu: In Progress Bug description: --noupdate Postpone updating the desktop icon system. If multiple icons are added in sequence this flag can be used to indicate that additional changes will follow and that it is not necassery to update the desktop icon system right away. necassery should be necessary ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xdg-utils 1.1.0~rc1-2ubuntu6 ProcVersionSignature: Ubuntu 3.2.0-15.24-generic 3.2.5 Uname: Linux 3.2.14-kroqernel+ x86_64 ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 CheckboxSubmission: 7f98738f6663bda1ae1c2900a3a1db71 CheckboxSystem: 577751a334467e78ed04da699e5debc9 Date: Mon May 7 22:13:40 2012 Dependencies: InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1) PackageArchitecture: all ProcEnviron: TERM=xterm PATH=(custom, user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: xdg-utils UpgradeStatus: Upgraded to precise on 2012-02-11 (86 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xdg-utils/+bug/996304/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1468027] Re: change default CJK fonts to Noto CJK
Fedora 21 only applies Adobe Source Han Sans / Noto Sans CJK to Chinese locale (zh_CN and zh_TW). Fedora does not use 69-language-selectors-*.conf because they only set one major font for one locale, and they write the relevant configuration in the corresponding fontconfig fille for the major font. That is, they set one font for Serif, Sans-serif, and Monospace (listed below). However, I don't like this method. Using 69-language-selectors-*.conf is more flexible here. ?xml version=1.0? !DOCTYPE fontconfig SYSTEM fonts.dtd fontconfig match test name=family compare=contains stringSource Han Sans/string /test edit name=autohint mode=assign boolfalse/bool /edit edit name=hintstyle mode=assign consthintfull/const /edit /match match test name=lang stringzh-tw/string /test test name=family stringmonospace/string /test edit name=family mode=prepend stringSource Han Sans TW/string stringSource Han Sans CN/string /edit edit name=family mode=prepend binding=strong stringDejaVu Sans Mono/string /edit /match match test name=lang stringzh-hk/string /test test name=family stringmonospace/string /test edit name=family mode=prepend stringSource Han Sans TW/string stringSource Han Sans CN/string /edit edit name=family mode=prepend binding=strong stringDejaVu Sans Mono/string /edit /match alias familySource Han Sans TW/family default familymonospace/family /default /alias match test name=lang stringzh-tw/string /test test name=family stringserif/string /test edit name=family mode=prepend stringSource Han Sans TW/string stringSource Han Sans CN/string /edit /match match test name=lang stringzh-hk/string /test test name=family stringserif/string /test edit name=family mode=prepend stringSource Han Sans TW/string stringSource Han Sans CN/string /edit /match alias familySource Han Sans TW/family default familyserif/family /default /alias match test name=lang stringzh-tw/string /test test name=family stringsans-serif/string /test edit name=family mode=prepend stringSource Han Sans TW/string stringSource Han Sans CN/string /edit /match match test name=lang stringzh-hk/string /test test name=family stringsans-serif/string /test edit name=family mode=prepend stringSource Han Sans TW/string stringSource Han Sans CN/string /edit /match alias familySource Han Sans TW/family default familysans-serif/family /default /alias /fontconfig -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1468027 Title: change default CJK fonts to Noto CJK Status in fonts-noto package in Ubuntu: New Status in language-selector package in Ubuntu: New Status in ubuntu-meta package in Ubuntu: New Bug description: just realize that fonts-noto-cjk is available in the repository, finally its packaged. i don't really know about korean community. But for Chinese and Japanese community, i think that the answer is clear. noto-cjk is definitely better what we had before, like fonts- wqy and fonts-droid. Android community had received these complains for years, finally they got them fixed on lollipop. Fedora also set it as default chinese font start from F21. and of course, i still hope that ubuntu could drop those 69-language-selector fontconfig files, just like what F13 did. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fonts-noto/+bug/1468027/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472633] [NEW] Source-code files have Proprietary Copyright License
Public bug reported: The explicit copyright text in each source file is Proprietary all rights reserved, not open source. The package copyright file /usr/share/doc/nvidia-340/copyright is less than ideal and only purports to repeat extracts from an email exchange, it is not a copyright license. I think we should regularise this by asking Nvidia to re-write the copyright headers of these files AND include a specific open-source license file COPYING or LICENCE in the kernel wedge source. Analysis of Copyright licenses, matching files with identical licence text by SHA hash: $ cd /usr/src/nvidia-340-340.76/; grep -rsl NVRM_COPYRIGHT_BEGIN * | while read F; do gawk 'BEGINFILE{printf %20s , FILENAME /dev/stderr} P==2{P=1} /NVRM_COPYRIGHT_BEGIN/{P=2} /NVRM_COPYRIGHT_END/{P=0} P==1{print $0}' $F | shasum - ; done | sort -k2 | gawk '{HASH=$2; if(OLDHASH == HASH){printf , %s, $1} else { printf \n; system( sed -n '/NVRM_COPYRIGHT_BEGIN/,/NVRM_COPYRIGHT_END/p' $1); printf \n%s %s,$2, $1; OLDHASH=HASH; HASH=$2}}END{printf \n}' /* _NVRM_COPYRIGHT_BEGIN_ * * Copyright 1999-2011 by NVIDIA Corporation. All rights reserved. All * information contained herein is proprietary and confidential to NVIDIA * Corporation. Any use, reproduction, or disclosure without the written * permission of NVIDIA Corporation is prohibited. * * _NVRM_COPYRIGHT_END_ 142a9954255cf621a8b822e57c0df036022f7131 nv-chrdev.c, nv-pat.c, nv-procfs.c, os-smp.c, os-usermap.c /* _NVRM_COPYRIGHT_BEGIN_ * * Copyright 2006-2013 by NVIDIA Corporation. All rights reserved. All * information contained herein is proprietary and confidential to NVIDIA * Corporation. Any use, reproduction, or disclosure without the written * permission of NVIDIA Corporation is prohibited. * * _NVRM_COPYRIGHT_END_ 3566944fad737242312d8117cc0b786c031b8df2 nv-reg.h /* _NVRM_COPYRIGHT_BEGIN_ * * Copyright 2001-2014 by NVIDIA Corporation. All rights reserved. All * information contained herein is proprietary and confidential to NVIDIA * Corporation. Any use, reproduction, or disclosure without the written * permission of NVIDIA Corporation is prohibited. * * _NVRM_COPYRIGHT_END_ 50f87b38c016af7e2adafd46d5f624f2fdde53ee nv-linux.h /* _NVRM_COPYRIGHT_BEGIN_ * * Copyright 1999-2014 by NVIDIA Corporation. All rights reserved. All * information contained herein is proprietary and confidential to NVIDIA * Corporation. Any use, reproduction, or disclosure without the written * permission of NVIDIA Corporation is prohibited. * * _NVRM_COPYRIGHT_END_ 72ec045aa16279c5691a8db32a68517968179b36 nv-dma.c, nv.h, nv-mmap.c, nv- usermap.c, os-interface.h /* _NVRM_COPYRIGHT_BEGIN_ * * Copyright 2013 by NVIDIA Corporation. All rights reserved. All * information contained herein is proprietary and confidential to NVIDIA * Corporation. Any use, reproduction, or disclosure without the written * permission of NVIDIA Corporation is prohibited. * * _NVRM_COPYRIGHT_END_ 7ef766516296a1c2ec11821ec2bde5fc86fbdddc nv-drm.c, nv_gpu_ops.h, nv_uvm_interface.c, nv_uvm_interface.h /* _NVRM_COPYRIGHT_BEGIN_ * * Copyright 2012-2013 by NVIDIA Corporation. All rights reserved. All * information contained herein is proprietary and confidential to NVIDIA * Corporation. Any use, reproduction, or disclosure without the written * permission of NVIDIA Corporation is prohibited. * * _NVRM_COPYRIGHT_END_ 80b82a3e58d12095c15a6f50c2d165376ac71fa8 nv-frontend.c, nv-frontend.h /* _NVRM_COPYRIGHT_BEGIN_ * * Copyright 2000-2001 by NVIDIA Corporation. All rights reserved. All * information contained herein is proprietary and confidential to NVIDIA * Corporation. Any use, reproduction, or disclosure without the written * permission of NVIDIA Corporation is prohibited. * * _NVRM_COPYRIGHT_END_ 8901250a106095785beee8109673eae76fee86b3 os-registry.c /* _NVRM_COPYRIGHT_BEGIN_ * * Copyright 2009 by NVIDIA Corporation. All rights reserved. All * information contained herein is proprietary and confidential to NVIDIA * Corporation. Any use, reproduction, or disclosure without the written * permission of NVIDIA Corporation is prohibited. * * _NVRM_COPYRIGHT_END_ 968e0608c735ef69737440abec5a19e393d63399 nv-gvi.c, rmil.h /* _NVRM_COPYRIGHT_BEGIN_ * * Copyright 1999-2001 by NVIDIA Corporation. All rights reserved. All * information contained herein is proprietary and confidential to NVIDIA * Corporation. Any use, reproduction, or disclosure without the written * permission of NVIDIA Corporation is prohibited. * * _NVRM_COPYRIGHT_END_ 9a6884bd215becac1848c1ebe1acd5b5abb172f2 nv-acpi.c /* _NVRM_COPYRIGHT_BEGIN_ * * Copyright 2005-2013 by NVIDIA Corporation. All rights reserved. All * information contained herein is proprietary and confidential to NVIDIA * Corporation. Any use, reproduction, or disclosure without the written * permission of NVIDIA Corporation is prohibited. * * _NVRM_COPYRIGHT_END_
[Desktop-packages] [Bug 1043740] Re: You need to setup an account is misspelled
Hi, I took a look at this issue. While the upstream bug was closed quite some time ago, a fixed version seems to have landed in Ubuntu only quite recently. The typo is fixed in empathy 3.12.9-1ubuntu1 on Ubuntu 15.04 (see attached screenshot), but it looks like all older releases are still affected. I am not sure what caused the delay, though there was a jump from empathy 3.8 to 3.12 so maybe that explains it. In any case, the bug seems fixed. :) ** Attachment added: set up.png https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/1043740/+attachment/4426404/+files/set%20up.png ** Changed in: empathy (Ubuntu) Status: Triaged = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/1043740 Title: You need to setup an account is misspelled Status in Chat app, and Telepathy user interface: Fix Released Status in empathy package in Ubuntu: Fix Released Bug description: empathy 3.5.90-0ubuntu4, Ubuntu Q 1. Start a guest session. 2. Launch Empathy. What you see: You need to setup an account to see contacts here. What you should see: You need to set up an account to see contacts here. That text is embarrassingly bad -- the font is enormous, and the text shouldn't even exist, instead taking you to a first-time assistant. But if nothing else, at least we could spell set up correctly. To manage notifications about this bug go to: https://bugs.launchpad.net/empathy/+bug/1043740/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1406802] Re: Vivid Unity Wallpaper horizontally hashed
#lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02) 04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder #lsusb Bus 002 Device 002: ID 058f:6377 Alcor Micro Corp. Multimedia Card Reader Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 0a48:3239 I/O Interconnect Multimedia Card Reader Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 046d:09a1 Logitech, Inc. QuickCam Communicate MP/S5500 Bus 001 Device 002: ID 04f9:0016 Brother Industries, Ltd Printer Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub #lshw Upon request, kind of long -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1406802 Title: Vivid Unity Wallpaper horizontally hashed Status in Nautilus: Confirmed Status in Ubuntu MATE: Incomplete Status in nautilus package in Ubuntu: Confirmed Bug description: Standard wallpaper selection distorted badly cut and displaced sideways. See screenshot. Lenovo Desktop Dual processor: processor : 0 vendor_id : GenuineIntel cpu family: 6 model : 23 model name: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz Standard dropdown windows like terminal, internet etc. normal. DISTRIB_RELEASE=15.04 DISTRIB_CODENAME=vivid DISTRIB_DESCRIPTION=Ubuntu Vivid Vervet (development branch) Linux Lenovo2 3.16.0-28-generic #38-Ubuntu SMP Fri Dec 12 17:37:40 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux model name: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz model name: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) jerry@Lenovo2:~$ ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: unity 7.3.1+15.04.20141216-0ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1 Uname: Linux 3.16.0-28-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.15.1-0ubuntu1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Wed Dec 31 14:06:16 2014 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu GraphicsCard: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA
[Desktop-packages] [Bug 1365752] Re: ubuntu-desktop depends on iBus, which is totally broken
** Changed in: unity-control-center (Baltix) Importance: Undecided = High ** Changed in: unity-control-center (Baltix) Assignee: (unassigned) = Mantas Kriaučiūnas (mantas) ** Changed in: unity-control-center (Baltix) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1365752 Title: ubuntu-desktop depends on iBus, which is totally broken Status in ubuntu-meta package in Ubuntu: Confirmed Status in unity-control-center package in Ubuntu: Confirmed Status in unity-control-center package in Baltix: Confirmed Bug description: Upgrading from Ubuntu 12.04 to 14.04 the package iBus has been installed in the system and activated by default. This has caused an amount of pain because it has completely broken the input method (symptoms: no en-uk keyboard available composite not working, backtick to be pressed twice). The problems are reported in a number of places; I've read somewhere I can't remember that Unity has some form of workaround against ibus but I don't use Unity (using Awesome on some systems, lubuntu on another one) and other windows managers are affected. Even disabling ibus (which has to be done via gnome-language-selector, instead of the keyboard panel in gnome-control-center, which is an usability problem that deserves its own bug report) the ibus processes keep on running. Probably this has no consequence but still there is no reason to have unwanted running processes. I have no idea where do these processes start, but I clearly have the idea that they shouldn't be running where not necessary. Uninstalling ibus is not straightforward because the ubuntu-desktop package depends on it. The dependency the core package ubuntu-desktop on ibus is excessive for a package that is 1) unneeded by many users and 2) broken for many users. The best solution to date is to: ibus exit sudo mv /usr/lib/ibus{,.bak} sudo mv /usr/bin/ibus{,.bak} Please remove the dependency of ubuntu-desktop on ibus and avoid installing it for european languages. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-meta/+bug/1365752/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1468027] Re: change default CJK fonts to Noto CJK
According to the README pdf file (https://github.com/adobe-fonts/source- han-sans/raw/release/SourceHanSansReadMe.pdf) of Adobe Source Han Sans, and the experience within LibreOffice, I have to say that Super OTC file is not well supported in Linux desktop. It is suggested using Regional Subset OTF files in Linux for now; however, that will take us a lot of space to keep all the OTF files. This is what Fedora provides for CN and TW locales, 7 files for about 39.6MB for TW locale and about 58.6MB for CN locale. The other way is to endure the poor support of Super OTC and file related issues to those infected packages. And this will be a hard way for us to go. It will benefit the ecosystem better in the long run, but I don't recommend this way. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to language-selector in Ubuntu. https://bugs.launchpad.net/bugs/1468027 Title: change default CJK fonts to Noto CJK Status in fonts-noto package in Ubuntu: New Status in language-selector package in Ubuntu: New Status in ubuntu-meta package in Ubuntu: New Bug description: just realize that fonts-noto-cjk is available in the repository, finally its packaged. i don't really know about korean community. But for Chinese and Japanese community, i think that the answer is clear. noto-cjk is definitely better what we had before, like fonts- wqy and fonts-droid. Android community had received these complains for years, finally they got them fixed on lollipop. Fedora also set it as default chinese font start from F21. and of course, i still hope that ubuntu could drop those 69-language-selector fontconfig files, just like what F13 did. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fonts-noto/+bug/1468027/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1471708] Re: For skylake system, u-s-d cause a black screen when resume from S3 via Lid Close
I created a merge request of Tim's branch into the 14.04 branch. ** Changed in: unity-settings-daemon (Ubuntu) Status: Triaged = In Progress ** Description changed: OEM LP private bug: https://bugs.launchpad.net/bugs/1466441 Title: Sometimes system turns a black screen when resume from S3 via Lid Close - Summary: + [Impact] + Sometimes system turns a black screen when resume from S3 via Lid Close It only has cursor on screen but still can switch to tty1. Failure rate ~ 1/5 - Steps: + [Test Case] 1. install Ubuntu 14.04.2 3.19+ kernel and boot to OS 2. Close the lid 3. Open the lid 4. check the display status Expected results: System should resume to the log in screen when open the lid Actual results: System sometimes fails to resume back to the log in screen but blackscreen instead. (Failure rate~ 1/5) + + [Regression Potential] + Low. Delaying touchscreen mapping by 3 seconds should not affect any other input device. + Details: unity-settings-deamon will call xinput --map-to-output 11 eDP1 at background, and it's being blocked so only cursor will show on screen. 1. Switch to tty1 when this happen 2. Login with user account on tty1. 3. Use DISPLAY=:0 xrandr on commandline you'll see it's being blocked. Since xinput is being blocked for some unknown reason (in gdb it shows polling on xcb_connect_to_fd() in XOpenDisplay() ), a possible workaround is to set a timeout for xinput in u-s-d. === modified file 'plugins/xrandr/gsd-xrandr-manager.c' --- plugins/xrandr/gsd-xrandr-manager.c 2014-06-05 11:56:15 + +++ plugins/xrandr/gsd-xrandr-manager.c 2015-07-01 08:59:56 + @@ -2199,7 +2199,7 @@ - if (gnome_rr_output_info_is_active(output)) { - g_debug (Mapping touchscreen %d onto output %s, - device_id, name); + if (gnome_rr_output_info_is_active(output)) { + g_debug (Mapping touchscreen %d onto output %s, + device_id, name); - sprintf (command, xinput --map-to-output %d %s, + sprintf (command, timeout 3s xinput --map-to-output %d %s, - device_id, name); - status = system (command); - } + device_id, name); + status = system (command); + } ** Summary changed: - For skylake system, u-s-d cause a black screen when resume from S3 via Lid Close + SRU: For skylake system, u-s-d cause a black screen when resume from S3 via Lid Close -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-settings-daemon in Ubuntu. https://bugs.launchpad.net/bugs/1471708 Title: SRU: For skylake system, u-s-d cause a black screen when resume from S3 via Lid Close Status in OEM Priority Project: New Status in OEM Priority Project trusty series: New Status in unity-settings-daemon package in Ubuntu: In Progress Bug description: OEM LP private bug: https://bugs.launchpad.net/bugs/1466441 Title: Sometimes system turns a black screen when resume from S3 via Lid Close [Impact] Sometimes system turns a black screen when resume from S3 via Lid Close It only has cursor on screen but still can switch to tty1. Failure rate ~ 1/5 [Test Case] 1. install Ubuntu 14.04.2 3.19+ kernel and boot to OS 2. Close the lid 3. Open the lid 4. check the display status Expected results: System should resume to the log in screen when open the lid Actual results: System sometimes fails to resume back to the log in screen but blackscreen instead. (Failure rate~ 1/5) [Regression Potential] Low. Delaying touchscreen mapping by 3 seconds should not affect any other input device. Details: unity-settings-deamon will call xinput --map-to-output 11 eDP1 at background, and it's being blocked so only cursor will show on screen. 1. Switch to tty1 when this happen 2. Login with user account on tty1. 3. Use DISPLAY=:0 xrandr on commandline you'll see it's being blocked. Since xinput is being blocked for some unknown reason (in gdb it shows polling on xcb_connect_to_fd() in XOpenDisplay() ), a possible workaround is to set a timeout for xinput in u-s-d. === modified file 'plugins/xrandr/gsd-xrandr-manager.c' --- plugins/xrandr/gsd-xrandr-manager.c 2014-06-05 11:56:15 + +++ plugins/xrandr/gsd-xrandr-manager.c 2015-07-01 08:59:56 + @@ -2199,7 +2199,7 @@ if (gnome_rr_output_info_is_active(output)) { g_debug (Mapping touchscreen %d onto output %s, device_id, name); - sprintf (command, xinput --map-to-output %d %s, + sprintf (command, timeout 3s xinput --map-to-output %d %s, device_id, name); status = system (command); } To manage notifications about this bug
[Desktop-packages] [Bug 1280053] Re: eclipse is a crashy mess on trusty
karsibali's solution did NOT work for me on ubuntu 14.04 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to eclipse in Ubuntu. https://bugs.launchpad.net/bugs/1280053 Title: eclipse is a crashy mess on trusty Status in eclipse package in Ubuntu: Confirmed Bug description: It seems apport has stopped catching eclipse crashes, so I'm reporting this issue by hand. To reproduce, all I have to do is open a medium sized Java project in eclipse and try to navigate around (using F3 and F4 etc.). After 3 or 4 operations, eclipse always crashes. This started right after upgrading to trusty. What can I do to help folks debug this further? ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: eclipse-platform 3.8.1-5.1 ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2 Uname: Linux 3.13.0-8-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.13.2-0ubuntu3 Architecture: amd64 CurrentDesktop: Unity Date: Thu Feb 13 21:11:10 2014 InstallationDate: Installed on 2011-09-18 (879 days ago) InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110426) SourcePackage: eclipse UpgradeStatus: Upgraded to trusty on 2014-02-02 (11 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eclipse/+bug/1280053/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 772709] Re: Network Manager Icon Is not changin when VPN is connected (nm-device-wired-secure icon is missing)
Still exists in Xubuntu 14.04 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-icon-theme in Ubuntu. https://bugs.launchpad.net/bugs/772709 Title: Network Manager Icon Is not changin when VPN is connected (nm-device- wired-secure icon is missing) Status in GNOME Icon Theme: New Status in elementary-icon-theme package in Ubuntu: Confirmed Status in gnome-icon-theme package in Ubuntu: Confirmed Status in lubuntu-artwork package in Ubuntu: Fix Released Status in network-manager-applet package in Ubuntu: Invalid Status in tango-icon-theme package in Ubuntu: Confirmed Bug description: Binary package hint: gnome-icon-theme Ater upgrading to 11.04 in gnome icon the (humanity and unity themes works fine) is see bad icons when connecting VPN and VPN is connected. Connected VPN icon is the same as original Network Manager. And connectin icon doen't show the Network manager icon only the flashing yellow lock (that must be over network manger icon) ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: gnome-icon-theme 2.31.0-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic i686 NonfreeKernelModules: nvidia Architecture: i386 Date: Fri Apr 29 01:05:10 2011 InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5) PackageArchitecture: all ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-icon-theme UpgradeStatus: Upgraded to natty on 2011-04-28 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-icon-theme/+bug/772709/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1361864] Re: add Preferred property to ConnectionContext interface
** Changed in: nuntium (Ubuntu) Status: In Progress = Fix Released ** Changed in: nuntium (Ubuntu RTM) Status: In Progress = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1361864 Title: add Preferred property to ConnectionContext interface Status in the base for Ubuntu mobile products: Confirmed Status in libqofono package in Ubuntu: Fix Released Status in network-manager package in Ubuntu: In Progress Status in nuntium package in Ubuntu: Fix Released Status in ofono package in Ubuntu: Fix Released Status in ubuntu-system-settings package in Ubuntu: In Progress Status in ubuntu-system-settings source package in Vivid: New Status in network-manager package in Ubuntu RTM: In Progress Status in nuntium package in Ubuntu RTM: Fix Released Status in ofono package in Ubuntu RTM: Fix Released Status in ubuntu-system-settings package in Ubuntu RTM: In Progress Bug description: To implement system-settings APN editor reliably there has to be a Tag field with is an arbitrary non user-visible string that can be set for any Context. We also need org.ofono.ConnectionManager.AddContext which takes a variant map with prepopulated values for the context to be created, so we can have a function in QOfono QOfonoConnectionManager::addContextWithTag(QString tag). To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1361864/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1454473] Re: In Ubuntu 15.04, simply moving the mouse via touchpad scrolls the window
This is actually a bug, not a question. The touchpad on Dell XPS 13 9343 sometimes behaves strangely on SOME applications (eg nautilus, evince etc), but NOT chromium for example. It produces clicks when being touched to move (nautilus), or drags the document instead of just moving the pointer (evince). Disabling Tap to Click from unity-control-center actually doesn't resolve the issue, clicks are still being produced on affected applications Workaround: Disable then re-enable the touchpad from unity-control-center, or run the following commands: $ xinput set-prop DLL0665:01 06CB:76AD UNKNOWN --type=int --format=8 Device Enabled 0 $ xinput set-prop DLL0665:01 06CB:76AD UNKNOWN --type=int --format=8 Device Enabled 1 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-input-synaptics in Ubuntu. https://bugs.launchpad.net/bugs/1454473 Title: In Ubuntu 15.04, simply moving the mouse via touchpad scrolls the window Status in xserver-xorg-input-synaptics package in Ubuntu: Confirmed Bug description: Version: Ubuntu 3.19.0-16.16-generic 3.19.3 (This is mostly a copy paste from here: http://askubuntu.com/questions/617117/in-ubuntu-15-04-simply-moving- the-mouse-via-touchpad-scrolls-the-window) When I first boot everything works fine. But then something happens (not sure what triggers it) and many programs start scrolling just by moving the mouse over the window. So far I see this happens in Nautilus, Document Reader, Archive Manager, Ubuntu Software Center, Meld, and System Monitor (what do they all have in common, GTK?). It does NOT happen in web browsers, thunderbird, programs using Mono, Java, etc, for some reason. To be more specific of the issue: if the mouse starting position is over a document in Document Reader, for example, and then I move the mouse via touchpad, it'll scroll the document like an anchor, where the position of the mouse over the document doesn't change (yet it scrolls). I have already tried disabling two finger scroll, disable while typing, and the tap to click options, but they made no difference (after the glitchiness starts). The other odd case is that in Nautilus, if the mouse starting position is over a file or directory, it sometimes selects it instead of scrolling. Single-clicking a directory will open the directory (so the initial touch acts like a clicks, and letting go acts as the second click). The only thing I can do to temporarily fix the problem is restart the computer. There are no issues when using a mouse. Update 2015/05/03: I see how to reproduce it now. It appears to be a glitchy two-finger scroll issue. If you scroll any window with two fingers a lot, eventually it'll start causing this problem. Try various actions with two fingers, like clicking with two fingers, or scrolling in various directions quickly, etc, and it will start happening. It's interesting that it only happens in certain programs and not in others, which makes me wonder whether it is really a trackpad issue or some framework's issue. I can confirm that this is happening on the 15.04 Live CD, so this happens out of the box. The only work-around for this issue is to disable two-finger scroll (if it's already glitchy you'll need to restart). Not sure if it matters, but I'm using the Dell XPS 13 2015 9343. Update 2015/05/05: Apparently this bug can still happen even with two- finger scroll off, though it's more rare. Again, only certain programs have the issue, so it's hard to tell if it's a touchpad issue or something else. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-16-generic 3.19.0-16.16 ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3 Uname: Linux 3.19.0-16-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ephi 1857 F pulseaudio /dev/snd/controlC0: ephi 1857 F pulseaudio CurrentDesktop: Unity Date: Tue May 12 22:06:46 2015 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=270ecec3-b78c-4f85-a337-acd54f5e0b0e InstallationDate: Installed on 2015-05-01 (12 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) Lsusb: Bus 001 Device 004: ID 0bda:5682 Realtek Semiconductor Corp. Bus 001 Device 003: ID 0a5c:216f Broadcom Corp. Bus 001 Device 010: ID 1d57:ac01 Xenta Wireless Receiver (Keyboard and Mouse) Bus 001 Device 002: ID 8087:8001 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS 13 9343 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-16-generic.efi.signed root=UUID=2bf488f3-23aa-4837-8f4d-861be61c94bc ro quiet splash vt.handoff=7 RelatedPackageVersions:
[Desktop-packages] [Bug 1424013] Re: Compiz high CPU and UI freeze on NVIDIA after fix for #269904 in trusty-updates
Hello everybody, This bug still exists. It happens on several of my systems (sysop @ university). My test system: HP Compaq 8200 Elite CMT (hardware spec: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02779501) with an extra video-card: Geforce 7300 GS I've tried nouveau and proprietary drivers. I'm running Ubuntu 14.04.2. Packages are as up-2-date as they're going to get. uname -a: Linux HOSTNAME 3.13.0-55-generic #92-Ubuntu SMP Sun Jun 14 18:32:20 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux We use lightdm, but light-locker is removed, because it causes trouble on other fronts. We also offer a multitude of WM's to our users, with all the trouble that causes :(. We've installed ubuntu-desktop, xubuntu- desktop, kde-workspace, gnome(classic), i3-wm, XMonad, Openbox. Most of our systems have very similar hardware, they're all HP Compaq systems (some a bit older, some newer). The trouble seems to be with the older NVIDIA card, because that's the same on all the troublesome systems. The fix Eloy Paris mentioned in comment #14 is the only thing so far that resolves the issue. Thankfully we use Puppet to manage our workstations, so implementing it wasn't too difficult, but I would very much like to see a more permanent solution. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to compiz in Ubuntu. https://bugs.launchpad.net/bugs/1424013 Title: Compiz high CPU and UI freeze on NVIDIA after fix for #269904 in trusty-updates Status in Compiz: Fix Committed Status in Compiz 0.9.11 series: Fix Committed Status in compiz package in Ubuntu: Fix Released Status in compiz source package in Trusty: Fix Released Bug description: [ Impact ] Immediately after the fix for #269904 landed in trusty-updates via compiz 1:0.9.11.3+14.04.20150122-0ubuntu1, my 14.04 machine with an NVIDIA card and using the nvidia-304 driver became unusable -- symtoms include compiz process high CPU (100%), UI freeze right after logging in (machine still up, reachable via SSH from the network), and a flood of these messages on the system log. [ Test Case ] Requires a GeForce 6150SE or similar integrated GPU from nVidia. Problem manifests immediately on login. [ Regression Potential ] The fix involves a specific hardware blacklist. Anticipated regressions include fixed support for the specific hard in future nVidia driver releases and potentially additional unidentified hardware affected by this bug needing to be added to the blacklist. Note that there is a manual workaround to the problem consisting of disabling the X11 Sync feature through CCSM. [ Other Info ] This fix was cherry-picked from the Ubuntu Vivid Vervet development release where it has been in regular use for some weeks. To manage notifications about this bug go to: https://bugs.launchpad.net/compiz/+bug/1424013/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1468664] Re: Whole session crashes after opening LibreOffice in 15.04
Chris, I don't understand what could I possibly do wrong, since I did exactly what was asked of me - right after the crash I opened /var/crash via Nautilus as root, found one error report that was a huge file (5 MB) and uploaded it here. The settings for automatic bug reporting via Apport are always the first thing I set up on my Ubuntu system for immediate upload to Launchpad - it's the way this bug report was uploaded. I will do what is asked of me and open Libreoffice for it to crash again and have Apport collect the data and generate a new one. I wanted to skip this step initially not to flood Launchpad with duplicates. I will file a new bug report soon. Thank you. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1468664 Title: Whole session crashes after opening LibreOffice in 15.04 Status in xorg package in Ubuntu: Invalid Bug description: In 15.04 when opening Libreoffice I get: starting version 219 [drm:radeon_acpi_init [radeon]] *ERROR* cannot find a backlight controller and the whole session crashes. The session didn't crash in 14.04.2. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Thu Jun 25 10:26:14 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu ExtraDebuggingInterest: No GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] [1002:9851] (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:381a] InstallationDate: Installed on 2015-06-20 (4 days ago) InstallationMedia: Ubuntu-GNOME 15.04 Vivid Vervet - Release amd64 (20150422) MachineType: LENOVO 80E3 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-21-generic root=UUID=db4352a7-efc2-4393-bfe9-7804d7eb71fc ro quiet splash vt.handoff=7 SourcePackage: xorg UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/08/2014 dmi.bios.vendor: LENOVO dmi.bios.version: A2CN23WW(V1.05) dmi.board.asset.tag: No Asset Tag dmi.board.name: Lancer 5B2 dmi.board.vendor: LENOVO dmi.board.version: 31900058 STD dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo G50-45 dmi.modalias: dmi:bvnLENOVO:bvrA2CN23WW(V1.05):bd07/08/2014:svnLENOVO:pn80E3:pvrLenovoG50-45:rvnLENOVO:rnLancer5B2:rvr31900058STD:cvnLENOVO:ct10:cvrLenovoG50-45: dmi.product.name: 80E3 dmi.product.version: Lenovo G50-45 dmi.sys.vendor: LENOVO version.compiz: compiz N/A version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Sun Jun 21 09:24:57 2015 xserver.configfile: default xserver.errors: RADEON(G0): [XvMC] Failed to initialize extension. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.17.1-0ubuntu3 xserver.video_driver: radeon To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1468664/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1168760] Re: Desktop files disappear offscreen when second monitor is connected
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: nautilus (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1168760 Title: Desktop files disappear offscreen when second monitor is connected Status in nautilus package in Ubuntu: Confirmed Bug description: When there is a second monitor attached and when the second monitor is on the right and the top of the second monitor is higher then the top of the primary monitor (on the left), then when one clicks the organize desktop button, the icons will start at where the top of the monitor would be if the tops were both lined up. (see http://picpaste.com/ubuntu_bug-l448hoUU.png). Icons on my computer are arrange top-to-bottom, left-to-right; the default setting. I am using Ubuntu 12.10. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1168760/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1127151] Re: The system network services are not compatible with this version
I realize this is an old thread but this issue persists even on ver 14.04. I am trying to edit the /etc/NetworkManager/NetworkManager.conf to: [ifupdown] managed=false Changed to [ifupdown] managed=true I am unable to save the file however as it is a Root owned read only file. What do I need to do to access root files or change ownership? Jeff -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1127151 Title: The system network services are not compatible with this version Status in network-manager package in Ubuntu: Confirmed Bug description: Network is not working after the upgrade of Ubuntu 12.04 network manager and related packages. First time happened already on June 2012, seems the problem still exists. Error message in Network manager is The system network services are not compatible with this version I needed to downgrade packages, Working versions below, later versions give the error libnm-glib-vpn1_0.9.4.0-0ubuntu3_i386.deb libnm-glib4_0.9.4.0-0ubuntu3_i386.deb libnm-util2_0.9.4.0-0ubuntu3_i386.deb network-manager_0.9.4.0-0ubuntu3_i386.deb network-manager-dbg_0.9.4.0-0ubuntu3_i386.deb Related thread and answer: http://ubuntuforums.org/showthread.php?t=2001421 https://answers.launchpad.net/ubuntu/+source/gnome-nettool/+question/199450 System info: Description: Ubuntu 12.04.2 LTS Release: 12.04 Linux bogey 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux Motherboard is gigabyte GA-E7AUM-DS2H with Nvidia Geforce 9400 chipset with integrated network. According to gigabyte website, network device is Realtek 8211CL chip (10/100/1000 Mbit) # lcpci -v 00:0a.0 Ethernet controller: NVIDIA Corporation MCP79 Ethernet (rev b1) Subsystem: Giga-byte Technology Device e000 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 41 Memory at e4187000 (32-bit, non-prefetchable) [size=4K] I/O ports at c800 [size=8] Memory at e4188000 (32-bit, non-prefetchable) [size=256] Memory at e4189000 (32-bit, non-prefetchable) [size=16] Capabilities: access denied Kernel driver in use: forcedeth Kernel modules: forcedeth To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1127151/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 996639] Re: Remmina fullscreen mode does not work on Unity
I can confirm this issue on 15.04. Viewport fullscreen mode doesn't work. However, you can somewhat workaround by selecting scrolled fullscreen mode. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to remmina in Ubuntu. https://bugs.launchpad.net/bugs/996639 Title: Remmina fullscreen mode does not work on Unity Status in remmina package in Ubuntu: Confirmed Bug description: Ubuntu 12.04 LTS (Precise), upgraded from Lucid LTS Remmina 1.0.0-1ubuntu6 On unity, remmina does not go into fullscreen mode properly. The global menu on the top and dash bar on the left are still visible after pressing the full screen button. This happens when connecting to a RDP server (Windows 7) and the resolution set to the client resolution. Other applications, such as evince, work in full screen mode. WORKAROUND: Use gnome-session-flashback (Compiz). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/remmina/+bug/996639/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472718] [NEW] package chromium-browser (not installed) failed to install/upgrade: Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chr
Public bug reported: Failure during installing chromium-browser with synaptic ProblemType: Package DistroRelease: Ubuntu 14.04 Package: chromium-browser (not installed) ProcVersionSignature: Ubuntu 3.13.0-57.95-generic 3.13.11-ckt21 Uname: Linux 3.13.0-57-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 Date: Wed Jul 8 19:38:02 2015 DuplicateSignature: package:chromium-browser:(not installed):Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms ErrorMessage: Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms InstallationDate: Installed on 2014-10-06 (275 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: chromium-browser Title: package chromium-browser (not installed) failed to install/upgrade: Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: chromium-browser (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package need-duplicate-check trusty -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1472718 Title: package chromium-browser (not installed) failed to install/upgrade: Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms Status in chromium-browser package in Ubuntu: New Bug description: Failure during installing chromium-browser with synaptic ProblemType: Package DistroRelease: Ubuntu 14.04 Package: chromium-browser (not installed) ProcVersionSignature: Ubuntu 3.13.0-57.95-generic 3.13.11-ckt21 Uname: Linux 3.13.0-57-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 Date: Wed Jul 8 19:38:02 2015 DuplicateSignature: package:chromium-browser:(not installed):Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms ErrorMessage: Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms InstallationDate: Installed on 2014-10-06 (275 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: chromium-browser Title: package chromium-browser (not installed) failed to install/upgrade: Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1472718/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472718] Re: package chromium-browser (not installed) failed to install/upgrade: Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chrom
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to chromium-browser in Ubuntu. https://bugs.launchpad.net/bugs/1472718 Title: package chromium-browser (not installed) failed to install/upgrade: Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms Status in chromium-browser package in Ubuntu: New Bug description: Failure during installing chromium-browser with synaptic ProblemType: Package DistroRelease: Ubuntu 14.04 Package: chromium-browser (not installed) ProcVersionSignature: Ubuntu 3.13.0-57.95-generic 3.13.11-ckt21 Uname: Linux 3.13.0-57-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 Date: Wed Jul 8 19:38:02 2015 DuplicateSignature: package:chromium-browser:(not installed):Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms ErrorMessage: Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms InstallationDate: Installed on 2014-10-06 (275 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) SourcePackage: chromium-browser Title: package chromium-browser (not installed) failed to install/upgrade: Extrahierte Daten für »./usr/lib/chromium-browser/icudtl.dat« können nicht nach »/usr/lib/chromium-browser/icudtl.dat.dpkg-new« kopiert werden: Unerwartetes Ende der Datei oder des Datenstroms UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1472718/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1465014] Re: Firefox and Chromium still vulnerable against LOGJAM
** Summary changed: - after update still vulnerable against LOGJAM + Firefox and Chromium still vulnerable against LOGJAM -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1465014 Title: Firefox and Chromium still vulnerable against LOGJAM Status in Network Security Services (NSS): Fix Released Status in firefox package in Ubuntu: Triaged Status in nss package in Ubuntu: Triaged Bug description: Hint: http://www.ubuntu.com/usn/usn-2639-1/ As a security improvement, this update also modifies OpenSSL behaviour to reject DH key sizes below 768 bits, preventing a possible downgrade attack. I installed the update but the test site says, i'm still vulnerable (see attachted screen shot). Site: https://weakdh.org/ - Xubuntu 15.04 -- up-to-date - openSSL 1.0.1f-1ubuntu11.4 -- up-to-date - Firefox 38.0+build3-0ubuntu0.15.04.1 -- up-to-date (even there are the versions 38.0.5 and 38.0.6 on the mozilla server available) - Chromium 43.0.2357.81-0ubuntu0.15.04.1.1170 -- up-to-date ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: openssl 1.0.1f-1ubuntu11.4 ProcVersionSignature: Ubuntu 3.19.0-20.20-generic 3.19.8 Uname: Linux 3.19.0-20-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 Date: Sun Jun 14 15:34:46 2015 InstallationDate: Installed on 2015-05-28 (16 days ago) InstallationMedia: Xubuntu 15.04 Vivid Vervet - Release amd64 (20150422.1) SourcePackage: openssl UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/nss/+bug/1465014/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1270410] Re: package tex-common 4.04 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Still receiving this error, still looking for info on how to implement the fix that was released per above. Anyone? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to tex-common in Ubuntu. https://bugs.launchpad.net/bugs/1270410 Title: package tex-common 4.04 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 Status in tex-common package in Ubuntu: Fix Released Bug description: This was generated while doing upgrade to newest ubuntu, upgrader stopped unity crashed and I had to cntrl/alt f2 to get a terminal and had to sudo killall dpkg and then sudo dpkg --configure -a several times to complete the upgrade to the point it was safe to reboot into a stable environment. ProblemType: Package DistroRelease: Ubuntu 13.10 Package: tex-common 4.04 ProcVersionSignature: Ubuntu 3.11.0-15.23-generic 3.11.10 Uname: Linux 3.11.0-15-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.12.5-0ubuntu2.2 Architecture: amd64 Date: Sat Jan 18 05:00:25 2014 DuplicateSignature: package:tex-common:4.04:subprocess installed post-installation script returned error exit status 1 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationDate: Installed on 2011-05-07 (986 days ago) InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1) MarkForUpload: True PackageArchitecture: all SourcePackage: tex-common Title: package tex-common 4.04 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to saucy on 2014-01-18 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/tex-common/+bug/1270410/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1432194] Re: Graphics unstable on Ubuntu 14.04 and 14.10 using Intel HD Graphics 5500
I was affected by this bug as well, but it was not too annoying to me as it rarely happened, so I did not pay much attention if it were solver or not. In the other hand the resume after suspend used to work well until a software update: Start-Date: 2015-07-01 01:24:16 Commandline: aptdaemon role='role-commit-packages' sender=':1.83' Upgrade: xserver-xorg-video-intel-lts-utopic:amd64 (2.99.914-1~exp1ubuntu4.2~trusty1, 2.99.914-1~exp1ubuntu4.3~trusty1), unattended-upgrades:amd64 (0.82.1ubuntu2.2, 0.82.1ubuntu2.3) End-Date: 2015-07-01 01:24:19 Since then, resume after suspend does not work well and the windows are not drawn properly (the same as bug #1452318 https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video- intel/+bug/1452318 ). I post here because the bugs seems to be related. I tried the proposed 2:2.99.914-1~exp1ubuntu4.5~trusty1 , but the resume after suspend problem persists. The only workaround for the moment is to switch the SNA to UXA as commented in #28, but a lack of performance is noticable as happen to #111. I attach screenshots of the problem with versions 2:2.99.914-1~exp1ubuntu4.3~trusty1 and 2:2.99.914-1~exp1ubuntu4.5~trusty1 ** Attachment added: with_2:2.99.914-1~exp1ubuntu4.5~trusty1.png https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1432194/+attachment/4426566/+files/with_2%3A2.99.914-1%7Eexp1ubuntu4.5%7Etrusty1.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1432194 Title: Graphics unstable on Ubuntu 14.04 and 14.10 using Intel HD Graphics 5500 Status in OEM Priority Project: New Status in X.org xf86-video-intel: Unknown Status in xserver-xorg-video-intel package in Ubuntu: Fix Released Status in xserver-xorg-video-intel-lts-utopic package in Ubuntu: Invalid Status in xserver-xorg-video-intel-lts-utopic source package in Trusty: Fix Committed Status in xserver-xorg-video-intel source package in Utopic: Fix Committed Bug description: Trying to achieve: Get a more stable graphics environment up and running Steps to take: basic ubtuntu 14.04 install. Boot up and run for a few minutes and then ... What happens: After running for a few minutes the graphics gets flacky. What should happen: Graphics should not get flaky. I have just installed ubuntu 14.04 on my new thinkpad t450s. Everything basically works, but something is very flaky about my keyboard or display or both. After running for awhile some apps (E.g., thunderbird and sometimes emacs for example) will display garbage. If I refresh by moving the screen around or changing buffers/tabs/etc. they can often recover. I see that there is an [Intel(R) Graphics Installer for Linux* 1.0.7](https://01.org/linuxgraphics/downloads/2014/intelr-graphics- installer-linux-1.0.7). I am leery about just loading this and running it. Any suggestions about how I should proceed? $ sudo lshw -c video *-display description: VGA compatible controller product: Broadwell-U Integrated Graphics vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:63 memory:e000-e0ff memory:d000-dfff ioport:3000(size=64) $ modinfo i915 | head filename: /lib/modules/3.16.0-31-generic/kernel/drivers/gpu/drm/i915/i915.ko license:GPL and additional rights description:Intel Graphics author: Tungsten Graphics, Inc. srcversion: 9929027A8A6F05972AD6986 alias: pci:v8086d22B3sv*sd*bc03sc*i* alias: pci:v8086d22B2sv*sd*bc03sc*i* alias: pci:v8086d22B1sv*sd*bc03sc*i* alias: pci:v8086d22B0sv*sd*bc03sc*i* alias: pci:v8086d162Dsv*sd*bc03sc*i* $ uname -a Linux mypad 3.16.0-31-generic #43~14.04.1-Ubuntu SMP Tue Mar 10 20:13:38 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1432194/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472758] [NEW] /usr/share/apport/whoopsie-upload-all:AssertionError:/usr/share/apport/whoopsie-upload-all@161:collect_info:process_report:add_gdb_info:gdb_command
Public bug reported: The Ubuntu Error Tracker has been receiving reports about a problem regarding apport. This problem was most recently seen with version 2.17.3-0ubuntu4, the problem page at https://errors.ubuntu.com/problem/bd73cc178a8f334b3cd563f43ec2912dfbf814b5 contains more details. ** Affects: apport (Ubuntu) Importance: Undecided Status: New ** Tags: kylin-14.10 rtm-14.09 trusty utopic vivid wily -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to apport in Ubuntu. https://bugs.launchpad.net/bugs/1472758 Title: /usr/share/apport/whoopsie-upload-all:AssertionError:/usr/share/apport /whoopsie-upload- all@161:collect_info:process_report:add_gdb_info:gdb_command Status in apport package in Ubuntu: New Bug description: The Ubuntu Error Tracker has been receiving reports about a problem regarding apport. This problem was most recently seen with version 2.17.3-0ubuntu4, the problem page at https://errors.ubuntu.com/problem/bd73cc178a8f334b3cd563f43ec2912dfbf814b5 contains more details. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1472758/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 504461] Re: Various Lintian errors
** Changed in: libgdiplus (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libgdiplus in Ubuntu. https://bugs.launchpad.net/bugs/504461 Title: Various Lintian errors Status in libgdiplus package in Ubuntu: Confirmed Bug description: Binary package hint: libgdiplus Just rebuilt libgdiplus for some font issue debugging; noticed that Lintian picked up these at the end: W: libgdiplus: non-dev-pkg-with-shlib-symlink usr/lib/libgdiplus.so.0.0.0 usr/lib/libgdiplus.so E: libgdiplus: no-shlibs-control-file usr/lib/libgdiplus.so.0.0.0 W: libgdiplus: package-name-doesnt-match-sonames libgdiplus0 Ideally they should be fixed, or Lintian overrides included in the package. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libgdiplus/+bug/504461/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1268257] Re: nvidia-331-updates 331.38-0ubuntu3: nvidia-331-updates kernel module failed to build, with only error: objdump: '... .tmp_nv.o': No such file
*** This bug is a duplicate of bug 1431753 *** https://bugs.launchpad.net/bugs/1431753 I created a script to run the common fixes for this problem. All you have to do is run by passing either 1, 2, or 3; e.g fix-nvidia.sh 1 #!/bin/bash # Fix for bug #1268257. # See: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1268257 if [ $# -gt 0 ]; then if [ $1 -eq 1 ]; then echo Running fix 1 (reconfigure). sudo dpkg-reconfigure nvidia-331 sudo dpkg-reconfigure nvidia-331-uvm fi if [ $1 -eq 2 ]; then echo Running fix 2 (reinstall). sudo apt-get install --reinstall nvidia-331 nvidia-331-uvm fi if [ $1 -eq 3 ]; then echo Running fix 1 and 2 (reconfigure and reinstall). sudo dpkg-reconfigure nvidia-331 sudo dpkg-reconfigure nvidia-331-uvm sudo apt-get install --reinstall nvidia-331 nvidia-331-uvm fi else if [ $# -eq 0 ]; then echo Please pick if you would like to run: echo 1 : fix 1 (reconfigure) echo 2 : fix 2 (reinstall) echo 3 : fix 1 2 (reconfigure and reinstall) fi fi ** Attachment added: fix-nvidia.sh https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1268257/+attachment/4426558/+files/fix-nvidia.sh -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu. https://bugs.launchpad.net/bugs/1268257 Title: nvidia-331-updates 331.38-0ubuntu3: nvidia-331-updates kernel module failed to build, with only error: objdump: '... .tmp_nv.o': No such file Status in NVIDIA Drivers Ubuntu: Fix Released Status in nvidia-graphics-drivers-331 package in Ubuntu: In Progress Status in nvidia-graphics-drivers-331-updates package in Ubuntu: In Progress Status in nvidia-graphics-drivers-340 package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-340-updates package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-346 package in Ubuntu: Fix Released Status in nvidia-graphics-drivers-346-updates package in Ubuntu: Fix Released Bug description: 2015-06-16 TJ: I've published a possibly fixed package for Trusty to my PPA at: https://launchpad.net/~tj/+archive/ubuntu/nvidia Please test and report back if that fixes the issue. If it does I can attach the fixed branch to bug #1431753 where the other release fixes are being tracked. --- original bug report follows **WARNING:** This bug has been widely reported and has *many* automatic subscribers. Please be considerate. **If you need help:** try searching and asking on http://discourse.ubuntu.com or http://ubuntuforums.org or contacting a nearby user group (see http://loco.ubuntu.com or search for LUG in your area). Link back to this bug for clarity. --- This seems to fix it (at least for one version upgrade) for many people $ sudo dpkg-reconfigure nvidia-331 after that... $ sudo dpkg-reconfigure nvidia-331-uvm (some users may be on the versions of these packages suffixed with -updates ) Update 2015-05-23: As of the recent kernel update (3.13.0-53), the above two commands followed by a reboot may not fix it. Instead: $ sudo apt-get install --reinstall nvidia-331 nvidia-331-uvm followed by a reboot. --- **If you want to unsubscribe:** see https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics- drivers-331-updates/+bug/1268257/+subscribe. You can also change your settings so you don't get comments but do get notified when the bug is solved - see https://askubuntu.com/questions/576523 for details. **If you want to comment:** Please consider if you have something meaningful to contribute to the 2500+ people who will get an email. **If you are an Ubuntu developer:** thanks for looking into this! :D Nvidia kernel module failed to build on kernel 3.13.0-2 Yesterday when the new kernel was pushed, the dkms process failed. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331-updates 331.20-0ubuntu9 ProcVersionSignature: Ubuntu 3.12.0-7.15-generic 3.12.4 Uname: Linux 3.12.0-7-generic x86_64 ApportVersion: 2.13.1-0ubuntu1 Architecture: amd64 DKMSKernelVersion: 3.13.0-2-generic Date: Sun Jan 12 01:28:35 2014 InstallationDate: Installed on 2013-11-03 (69 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release amd64 (20131016.1) PackageVersion: 331.20-0ubuntu9 SourcePackage: nvidia-graphics-drivers-331-updates Title: nvidia-331-updates 331.20-0ubuntu9: nvidia-331-updates kernel module failed to build UpgradeStatus: Upgraded to trusty on 2013-12-29 (13 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/nvidia-drivers-ubuntu/+bug/1268257/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help :
[Desktop-packages] [Bug 1241986] Re: Cannot connect to WPA/WPA2, EAP-PEAP, MSCHAPV2 network
** Changed in: canonical-devices-system-image Status: Fix Released = In Progress -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1241986 Title: Cannot connect to WPA/WPA2, EAP-PEAP, MSCHAPV2 network Status in the base for Ubuntu mobile products: In Progress Status in indicator-network package in Ubuntu: Confirmed Status in network-manager package in Ubuntu: Triaged Status in ubuntu-system-settings package in Ubuntu: Fix Released Status in unity8 package in Ubuntu: Confirmed Bug description: On Ubuntu for Phones final image on mako I can see a network but cannot connect because I never get prompted for the username/password. https://wiki.ubuntu.com/Networking#wi-fi-authentication-variations: In both the ‘Connect to “{network name}”’ and “Connect to Hidden Network” dialogs, the contents of the dialog, and the behavior of the “Connect” button, should vary depending on the security and authentication methods... To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1241986/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472768] [NEW] horizontal scrollbar overlays obsures bottom line of window
Public bug reported: Limited affect generally can be worked around by resizing window but it should do a better job somehow. When line is obsured it can not be highlighted or clicked on. Seen easily in gedit synaptic, 2 attached picture show in gedit ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: libgtk-3-0 3.16.4-2ubuntu1 ProcVersionSignature: Ubuntu 4.0.0-4.6-generic 4.0.7 Uname: Linux 4.0.0-4-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.3-0ubuntu4 Architecture: amd64 CurrentDesktop: Unity Date: Wed Jul 8 16:15:26 2015 InstallationDate: Installed on 2015-06-15 (22 days ago) InstallationMedia: Ubuntu 15.10 Wily Werewolf - Alpha amd64 (20150603) SourcePackage: gtk+3.0 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gtk+3.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug wily -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1472768 Title: horizontal scrollbar overlays obsures bottom line of window Status in gtk+3.0 package in Ubuntu: New Bug description: Limited affect generally can be worked around by resizing window but it should do a better job somehow. When line is obsured it can not be highlighted or clicked on. Seen easily in gedit synaptic, 2 attached picture show in gedit ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: libgtk-3-0 3.16.4-2ubuntu1 ProcVersionSignature: Ubuntu 4.0.0-4.6-generic 4.0.7 Uname: Linux 4.0.0-4-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.3-0ubuntu4 Architecture: amd64 CurrentDesktop: Unity Date: Wed Jul 8 16:15:26 2015 InstallationDate: Installed on 2015-06-15 (22 days ago) InstallationMedia: Ubuntu 15.10 Wily Werewolf - Alpha amd64 (20150603) SourcePackage: gtk+3.0 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1472768/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472750] [NEW] Connecting to Wi-Fi network stuck at obtaining address
Public bug reported: When I try to connect to my home network, the connection becomes stuck at obtaining address. I dualboot and the connection works fine on Windows. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu15.2 ProcVersionSignature: Ubuntu 3.19.0-22.22-generic 3.19.8-ckt1 Uname: Linux 3.19.0-22-generic i686 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1.1 Architecture: i386 CurrentDesktop: KDE Date: Wed Jul 8 21:24:44 2015 IfupdownConfig: auto lo iface lo inet loopback InstallationDate: Installed on 2012-05-12 (1152 days ago) InstallationMedia: Kubuntu 12.04 LTS Precise Pangolin - Release i386 (20120423) IpRoute: default via 192.168.0.1 dev eth0 proto static metric 100 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.2 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2015-04-23 (75 days ago) mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2014-03-08T14:45:48.205794 nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH karaluh a7555e49-d710-4151-8749-28cbaf6146a8 802-11-wireless 1436303693 wto, 7 lip 2015, 23:14:53 yes no /org/freedesktop/NetworkManager/Settings/1 yes wlan0 activating /org/freedesktop/NetworkManager/ActiveConnection/0 Połączenie przewodowe 1 f3a15bb7-5ba6-4d61-ae24-345593df7986 802-3-ethernet 1436383330 śro, 8 lip 2015, 21:22:10 yes no /org/freedesktop/NetworkManager/Settings/0 yes eth0activated /org/freedesktop/NetworkManager/ActiveConnection/1 nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 package-from-proposed vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1472750 Title: Connecting to Wi-Fi network stuck at obtaining address Status in network-manager package in Ubuntu: New Bug description: When I try to connect to my home network, the connection becomes stuck at obtaining address. I dualboot and the connection works fine on Windows. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: network-manager 0.9.10.0-4ubuntu15.2 ProcVersionSignature: Ubuntu 3.19.0-22.22-generic 3.19.8-ckt1 Uname: Linux 3.19.0-22-generic i686 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1.1 Architecture: i386 CurrentDesktop: KDE Date: Wed Jul 8 21:24:44 2015 IfupdownConfig: auto lo iface lo inet loopback InstallationDate: Installed on 2012-05-12 (1152 days ago) InstallationMedia: Kubuntu 12.04 LTS Precise Pangolin - Release i386 (20120423) IpRoute: default via 192.168.0.1 dev eth0 proto static metric 100 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.2 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true SourcePackage: network-manager UpgradeStatus: Upgraded to vivid on 2015-04-23 (75 days ago) mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2014-03-08T14:45:48.205794 nmcli-con: NAME UUID TYPE TIMESTAMP TIMESTAMP-REAL AUTOCONNECT READONLY DBUS-PATH ACTIVE DEVICE STATE ACTIVE-PATH karaluh a7555e49-d710-4151-8749-28cbaf6146a8 802-11-wireless 1436303693 wto, 7 lip 2015, 23:14:53 yes no /org/freedesktop/NetworkManager/Settings/1 yes wlan0 activating /org/freedesktop/NetworkManager/ActiveConnection/0 Połączenie przewodowe 1 f3a15bb7-5ba6-4d61-ae24-345593df7986 802-3-ethernet 1436383330 śro, 8 lip 2015, 21:22:10 yes no /org/freedesktop/NetworkManager/Settings/0 yes eth0activated /org/freedesktop/NetworkManager/ActiveConnection/1 nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 2: Error: Object 'nm' is unknown, try 'nmcli help'. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1472750/+subscriptions
[Desktop-packages] [Bug 638535] Re: CPU Frequency Scaling Monitor does not keep first chosen preferences after fresh restart
** Changed in: gnome-applets (Ubuntu) Status: Confirmed = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-applets in Ubuntu. https://bugs.launchpad.net/bugs/638535 Title: CPU Frequency Scaling Monitor does not keep first chosen preferences after fresh restart Status in The Gnome Panel Applets: Expired Status in gnome-applets package in Ubuntu: Invalid Bug description: Binary package hint: gnome-applets 1) lsb_release -rd Description: Ubuntu maverick (development branch) Release: 10.10 2) apt-cache policy gnome-applets gnome-applets: Installed: 2.30.0-3ubuntu2 Candidate: 2.30.0-3ubuntu2 Version table: *** 2.30.0-3ubuntu2 0 500 http://us.archive.ubuntu.com/ubuntu/ maverick/main i386 Packages 100 /var/lib/dpkg/status 3) What I expected to happen is when I login from a fresh restart, I right click each core separately then click 1 GHz (50% for my core) this preference is kept until I change it again. 4) What happens instead is that after I choose this, it shows 50% for both cores for about 30 seconds, then changes back to the default. Once I choose it again, then this preference persists. ProblemType: Bug DistroRelease: Ubuntu 10.10 Package: gnome-applets 2.30.0-3ubuntu2 ProcVersionSignature: Ubuntu 2.6.35-21.31-generic 2.6.35.4 Uname: Linux 2.6.35-21-generic i686 Architecture: i386 Date: Tue Sep 14 20:17:28 2010 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: gnome-applets To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-applets/+bug/638535/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1449892] Re: yuv to rgb translation is faulty for Intel Generation 8 Graphics
Hello Uwe, or anyone else affected, Accepted xserver-xorg-video-intel-lts-vivid into trusty-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/xserver-xorg-video-intel-lts- vivid/2:2.99.917-1~exp1ubuntu2.2~trusty1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, and change the tag from verification-needed to verification-done. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Tags removed: verification-done ** Tags added: verification-needed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1449892 Title: yuv to rgb translation is faulty for Intel Generation 8 Graphics Status in X.org xf86-video-intel: Fix Released Status in xserver-xorg-video-intel package in Ubuntu: Fix Released Status in xserver-xorg-video-intel source package in Vivid: Fix Released Status in xserver-xorg-video-intel package in Debian: Confirmed Bug description: [Impact] running mplayer or vlc the video output is incorrect. There are are 2 line steps on edges. The problems is known and there is already an upstream fix available. http://www.spinics.net/lists/intel-gfx/msg65030.html I have rebuild the driver with git from 2015-04-28, and the video output is correct now. The bugfix is for Generation 8 Intel graphics like Intel NUC with Core I5-5250 and HD6000 grahics in my case. The used version is Ubuntu vivid amd64. [Test Case] Launch Skype, VLC or mplayer and use xv as video output. A sample of the corruption can be found here: https://a.disquscdn.com/uploads/mediaembed/images/1942/867/original.jpg [Regression Potential] None. Admittedly I may not be the right one to fully assess the risk. Any help on this matter would be much appreciated. [Other Info] Already fixed upstream. To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1449892/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1241986] Re: Cannot connect to WPA/WPA2, EAP-PEAP, MSCHAPV2 network
** Changed in: canonical-devices-system-image Status: In Progress = Fix Released -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1241986 Title: Cannot connect to WPA/WPA2, EAP-PEAP, MSCHAPV2 network Status in the base for Ubuntu mobile products: Fix Released Status in indicator-network package in Ubuntu: Confirmed Status in network-manager package in Ubuntu: Triaged Status in ubuntu-system-settings package in Ubuntu: Fix Released Status in unity8 package in Ubuntu: Confirmed Bug description: On Ubuntu for Phones final image on mako I can see a network but cannot connect because I never get prompted for the username/password. https://wiki.ubuntu.com/Networking#wi-fi-authentication-variations: In both the ‘Connect to “{network name}”’ and “Connect to Hidden Network” dialogs, the contents of the dialog, and the behavior of the “Connect” button, should vary depending on the security and authentication methods... To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1241986/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1431811] Re: unity-control-center crashed with SIGSEGV in FcitxConfigFree()
This bug is not fixed as far as I can see in unity-control-center (15.04.0+15.04.20150410-0ubuntu1) vivid; 2 updates after the aforementioned 0408 update. was asking me to update libcups2 however no luck after update it. the same exact error appeared; also, it seems causing network icon disappeared as well even in IBUS mode. Please investigate. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity-control-center in Ubuntu. https://bugs.launchpad.net/bugs/1431811 Title: unity-control-center crashed with SIGSEGV in FcitxConfigFree() Status in unity-control-center package in Ubuntu: Fix Released Bug description: Crashed when switching my input keyboard from English US to English UK. ProblemType: Crash DistroRelease: Ubuntu 15.04 Package: unity-control-center 15.04.0+15.04.20150310-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-9.9-generic 3.19.1 Uname: Linux 3.19.0-9-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.16.2-0ubuntu2 Architecture: amd64 CurrentDesktop: Unity Date: Fri Mar 13 11:50:15 2015 ExecutablePath: /usr/bin/unity-control-center InstallationDate: Installed on 2015-03-12 (0 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150306) ProcCmdline: unity-control-center keyboard SegvAnalysis: Segfault happened at: 0x7fa5a4708767 FcitxConfigFree+39: mov (%rax),%rax PC (0x7fa5a4708767) ok source (%rax) (0x) not located in a known VMA region (needed readable region)! destination %rax ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: unity-control-center StacktraceTop: FcitxConfigFree () from /usr/lib/x86_64-linux-gnu/libfcitx-config.so.4 ?? () from /usr/lib/x86_64-linux-gnu/unity-control-center-1/panels/libregion.so ?? () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_object_unref () from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /usr/lib/x86_64-linux-gnu/unity-control-center-1/panels/libregion.so Title: unity-control-center crashed with SIGSEGV in FcitxConfigFree() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo usr_lib_unity-control-center: deja-dup 32.0-0ubuntu5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity-control-center/+bug/1431811/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472786] [NEW] broadwayd man page misses GDK_BACKEND=broadway
Public bug reported: On Lubuntu 15.04 the broadway man page says: Start your applications like this: BROADWAY_DISPLAY=:5 gtk3-demo But the command I had to use is GDK_BACKEND=broadway BROADWAY_DISPLAY=:5 gtk3-demo Is that a bug in man page or in the library? ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: libgtk-3-0 3.14.13-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: LXDE Date: Wed Jul 8 17:08:38 2015 InstallationDate: Installed on 2015-02-09 (149 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: gtk+3.0 UpgradeStatus: Upgraded to vivid on 2015-05-30 (38 days ago) ** Affects: gtk+3.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1472786 Title: broadwayd man page misses GDK_BACKEND=broadway Status in gtk+3.0 package in Ubuntu: New Bug description: On Lubuntu 15.04 the broadway man page says: Start your applications like this: BROADWAY_DISPLAY=:5 gtk3-demo But the command I had to use is GDK_BACKEND=broadway BROADWAY_DISPLAY=:5 gtk3-demo Is that a bug in man page or in the library? ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: libgtk-3-0 3.14.13-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: LXDE Date: Wed Jul 8 17:08:38 2015 InstallationDate: Installed on 2015-02-09 (149 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: gtk+3.0 UpgradeStatus: Upgraded to vivid on 2015-05-30 (38 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1472786/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 12261] [Review update] master
Review in progress for https://review.opencontrail.org/12261 Submitter: Kumar Harsh (hku...@juniper.net) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to openoffice.org in Ubuntu. https://bugs.launchpad.net/bugs/12261 Title: hoary openoffice.org won't build from source Status in openoffice.org package in Ubuntu: Fix Released Bug description: Building openoffice.org_1.1.3-2.3ubuntu7 In a fresh debootstrapped hoary chroot there seems to be a problem with the new eds module: Making: ../../../unxlngi4.pro/lib/libevoab2.so gcc -c -fPIC -o ../../../unxlngi4.pro/slo/evoab2_version.o -DUNX -I../../../unxlngi4.pro/inc /tmp/openoffice.org-1.1.3/solenv/src/version.c gcc -O2 -Bsymbolic -z combreloc -z defs -shared -Wl,-O1 -Wl,--version-script ../../../unxlngi4.pro/misc/evoab1.5_evoab2.map -L../../../unxlngi4.pro/lib -L../lib -L/tmp/openoffice.org-1.1.3/solenv/unxlngi4/lib -L/tmp/openoffice.org-1.1.3/solver/645/unxlngi4.pro/lib -L/tmp/openoffice.org-1.1.3/solenv/unxlngi4/lib -LNO_JAVA_HOME/lib -LNO_JAVA_HOME/jre/lib/i386 -LNO_JAVA_HOME/jre/lib/i386/client -LNO_JAVA_HOME/jre/lib/i386/native_threads -L/usr/lib -L/usr/X11R6/lib ../../../unxlngi4.pro/slo/NDriver.o ../../../unxlngi4.pro/slo/NTables.o ../../../unxlngi4.pro/slo/NCatalog.o ../../../unxlngi4.pro/slo/NConnection.o ../../../unxlngi4.pro/slo/NDatabaseMetaData.o ../../../unxlngi4.pro/slo/NStatement.o ../../../unxlngi4.pro/slo/NPreparedStatement.o ../../../unxlngi4.pro/slo/NServices.o ../../../unxlngi4.pro/slo/NResultSet.o ../../../unxlngi4.pro/slo/NResultSetMetaData.o ../../../unxlngi4.pro/slo/NDebug.o ../../../unxlngi4.pro/slo/evoab2_version.o ../../../unxlngi4.pro/slo/evoab2_description.o -o ../../../unxlngi4.pro/lib/libevoab2.so -lcppu -lcppuhelpergcc3 -lvos3gcc3 -lsvl645li -lvcl645li -ltl645li -lsvt645li -lutl645li -lucbhelper2gcc3 -lsal -ldbtools2 -lfile645li -lcomphelp3gcc3 -Wl,--export-dynamic -pthread -lebook-1.2 -ledataserver-1.2 -lgnome-2 -lpopt -lxml2 -lpthread -lz -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -ldl -lpthread -lm -Wl,-Bdynamic -lstlport_gcc -lstdc++ rm -f ../../../unxlngi4.pro/lib/check_libevoab2.so mv ../../../unxlngi4.pro/lib/libevoab2.so ../../../unxlngi4.pro/lib/check_libevoab2.so /tmp/openoffice.org-1.1.3/solenv/bin/checkdll.sh -L../../../unxlngi4.pro/lib -L../lib -L/tmp/openoffice.org-1.1.3/solenv/unxlngi4/lib -L/tmp/openoffice.org-1.1.3/solver/645/unxlngi4.pro/lib -L/tmp/openoffice.org-1.1.3/solenv/unxlngi4/lib -LNO_JAVA_HOME/lib -LNO_JAVA_HOME/jre/lib/i386 -LNO_JAVA_HOME/jre/lib/i386/client -LNO_JAVA_HOME/jre/lib/i386/native_threads -L/usr/lib -L/usr/X11R6/lib ../../../unxlngi4.pro/lib/check_libevoab2.so Checking DLL ../../../unxlngi4.pro/lib/check_libevoab2.so ...: ERROR: /usr/lib/libsoftokn3.so: undefined symbol: PR_GetLibraryFilePathname dmake: Error code 1, while making '../../../unxlngi4.pro/lib/libevoab2.so' Running checkdll manually I found removing -L/tmp/openoffice.org-1.1.3/solver/645/unxlngi4.pro/lib allowed for a successful check. libsoftokn is part of mozilla so perhaps there is a clash with the openoffice version of the mozilla libraries in /tmp/openoffice.org-1.1.3/solver/645/unxlngi4.pro/lib, e.g. libnspr4.so, which libsoftokn also links with. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openoffice.org/+bug/12261/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 12261] [Review update] master
Review in progress for https://review.opencontrail.org/12261 Submitter: Kumar Harsh (hku...@juniper.net) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to openoffice.org in Ubuntu. https://bugs.launchpad.net/bugs/12261 Title: hoary openoffice.org won't build from source Status in openoffice.org package in Ubuntu: Fix Released Bug description: Building openoffice.org_1.1.3-2.3ubuntu7 In a fresh debootstrapped hoary chroot there seems to be a problem with the new eds module: Making: ../../../unxlngi4.pro/lib/libevoab2.so gcc -c -fPIC -o ../../../unxlngi4.pro/slo/evoab2_version.o -DUNX -I../../../unxlngi4.pro/inc /tmp/openoffice.org-1.1.3/solenv/src/version.c gcc -O2 -Bsymbolic -z combreloc -z defs -shared -Wl,-O1 -Wl,--version-script ../../../unxlngi4.pro/misc/evoab1.5_evoab2.map -L../../../unxlngi4.pro/lib -L../lib -L/tmp/openoffice.org-1.1.3/solenv/unxlngi4/lib -L/tmp/openoffice.org-1.1.3/solver/645/unxlngi4.pro/lib -L/tmp/openoffice.org-1.1.3/solenv/unxlngi4/lib -LNO_JAVA_HOME/lib -LNO_JAVA_HOME/jre/lib/i386 -LNO_JAVA_HOME/jre/lib/i386/client -LNO_JAVA_HOME/jre/lib/i386/native_threads -L/usr/lib -L/usr/X11R6/lib ../../../unxlngi4.pro/slo/NDriver.o ../../../unxlngi4.pro/slo/NTables.o ../../../unxlngi4.pro/slo/NCatalog.o ../../../unxlngi4.pro/slo/NConnection.o ../../../unxlngi4.pro/slo/NDatabaseMetaData.o ../../../unxlngi4.pro/slo/NStatement.o ../../../unxlngi4.pro/slo/NPreparedStatement.o ../../../unxlngi4.pro/slo/NServices.o ../../../unxlngi4.pro/slo/NResultSet.o ../../../unxlngi4.pro/slo/NResultSetMetaData.o ../../../unxlngi4.pro/slo/NDebug.o ../../../unxlngi4.pro/slo/evoab2_version.o ../../../unxlngi4.pro/slo/evoab2_description.o -o ../../../unxlngi4.pro/lib/libevoab2.so -lcppu -lcppuhelpergcc3 -lvos3gcc3 -lsvl645li -lvcl645li -ltl645li -lsvt645li -lutl645li -lucbhelper2gcc3 -lsal -ldbtools2 -lfile645li -lcomphelp3gcc3 -Wl,--export-dynamic -pthread -lebook-1.2 -ledataserver-1.2 -lgnome-2 -lpopt -lxml2 -lpthread -lz -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -ldl -lpthread -lm -Wl,-Bdynamic -lstlport_gcc -lstdc++ rm -f ../../../unxlngi4.pro/lib/check_libevoab2.so mv ../../../unxlngi4.pro/lib/libevoab2.so ../../../unxlngi4.pro/lib/check_libevoab2.so /tmp/openoffice.org-1.1.3/solenv/bin/checkdll.sh -L../../../unxlngi4.pro/lib -L../lib -L/tmp/openoffice.org-1.1.3/solenv/unxlngi4/lib -L/tmp/openoffice.org-1.1.3/solver/645/unxlngi4.pro/lib -L/tmp/openoffice.org-1.1.3/solenv/unxlngi4/lib -LNO_JAVA_HOME/lib -LNO_JAVA_HOME/jre/lib/i386 -LNO_JAVA_HOME/jre/lib/i386/client -LNO_JAVA_HOME/jre/lib/i386/native_threads -L/usr/lib -L/usr/X11R6/lib ../../../unxlngi4.pro/lib/check_libevoab2.so Checking DLL ../../../unxlngi4.pro/lib/check_libevoab2.so ...: ERROR: /usr/lib/libsoftokn3.so: undefined symbol: PR_GetLibraryFilePathname dmake: Error code 1, while making '../../../unxlngi4.pro/lib/libevoab2.so' Running checkdll manually I found removing -L/tmp/openoffice.org-1.1.3/solver/645/unxlngi4.pro/lib allowed for a successful check. libsoftokn is part of mozilla so perhaps there is a clash with the openoffice version of the mozilla libraries in /tmp/openoffice.org-1.1.3/solver/645/unxlngi4.pro/lib, e.g. libnspr4.so, which libsoftokn also links with. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openoffice.org/+bug/12261/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472792] [NEW] evince does not open with broadway backend
Public bug reported: On Lubuntu 15.04, when trying to open Evince with GTK+ Broadway backend, Evince reports incomplete errors and then ends. In first terminal: $ broadwayd -a 127.0.0.1 -p 8889 :2 Listening on /run/user/1000/broadway3.socket In second terminal: $ GDK_BACKEND=broadway BROADWAY_DISPLAY=:2 evince Unable to init server: Could not connect: Permission denied Cannot parse arguments: Cannot open display: (There is nothing more in the output, program ends.) gtk3-demo or gitg have GUI in a browser as expected. Not sure if related or if it is perhaps expected, but I cannot see the socket file (with sudo or without): $ ls /run/user/1000/broadway3.socket ls: cannot access /run/user/1000/broadway3.socket: No such file or directory ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: libgtk-3-0 3.14.13-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: LXDE Date: Wed Jul 8 17:13:25 2015 InstallationDate: Installed on 2015-02-09 (149 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: gtk+3.0 UpgradeStatus: Upgraded to vivid on 2015-05-30 (38 days ago) ** Affects: gtk+3.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1472792 Title: evince does not open with broadway backend Status in gtk+3.0 package in Ubuntu: New Bug description: On Lubuntu 15.04, when trying to open Evince with GTK+ Broadway backend, Evince reports incomplete errors and then ends. In first terminal: $ broadwayd -a 127.0.0.1 -p 8889 :2 Listening on /run/user/1000/broadway3.socket In second terminal: $ GDK_BACKEND=broadway BROADWAY_DISPLAY=:2 evince Unable to init server: Could not connect: Permission denied Cannot parse arguments: Cannot open display: (There is nothing more in the output, program ends.) gtk3-demo or gitg have GUI in a browser as expected. Not sure if related or if it is perhaps expected, but I cannot see the socket file (with sudo or without): $ ls /run/user/1000/broadway3.socket ls: cannot access /run/user/1000/broadway3.socket: No such file or directory ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: libgtk-3-0 3.14.13-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-21.21-generic 3.19.8 Uname: Linux 3.19.0-21-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: LXDE Date: Wed Jul 8 17:13:25 2015 InstallationDate: Installed on 2015-02-09 (149 days ago) InstallationMedia: Lubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) SourcePackage: gtk+3.0 UpgradeStatus: Upgraded to vivid on 2015-05-30 (38 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1472792/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1471565] Re: Mint 13: Firefox 39.0 crashes right on startup
** Tags added: third-party-packages -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1471565 Title: Mint 13: Firefox 39.0 crashes right on startup Status in firefox package in Ubuntu: New Bug description: Mint 13 32-bit: Firefox 39.0 crashes right on startup with the error message printed twice: [NPAPI 8734] ###!!! ABORT: Aborting on channel error.: file /build/firefox-ALgUKk/firefox-39.0+build5/ipc/glue/MessageChannel.cpp, line 1597 This affects the Firefox package Firefox 39.0-build5-0ubuntu0.12.04.1 provided by the Ubuntu Mozilla Security team. The problematic file in the firefox package seems to be the file libxul.so. This is where the crash actually occurs. Note: This crash seems to happen on any 32-bit version of Linux Mint 13. It does not seem, however, to affect Ubuntu 12.04.x 32-bit, on which Mint 13 32-bit is based. The file libxul.so installed as part of Firefox 39.0-build5-0ubuntu0.12.04.1 is dated 29-Jun 2015 14:19. The file libxul.so that comes as part of the genuine Mozilla tarball has got the date 01-Jul-2015 02:49. Replacing the libxul.so installed through the PPA by the genuine Mozilla file solves the isse, as far as I can test and tell. For more details, please, see this report in the Linux Mint forum: http://forums.linuxmint.com/viewtopic.php?f=47t=199433 (Mint 13: Firefox 39.0 crashes right on startup) It would be greatly appreciated if this problem could by investigated and hopefully solved before Firefox 39.0 will be made available on the normal Ubuntu repos, because this is where Mint13, too, like Ubuntu 12.0.4x, fetches most of it software from. And up to Firefox 38.0, the Ubuntu provided Firefox has always run perfectly fine on Mint 13, too. --- Requested details: (1) ~$ lsb_release -rd Description: Linux Mint 13 Maya Release: 13 ~$ cat /etc/os-release NAME=Ubuntu VERSION=12.04.5 LTS, Precise Pangolin ID=ubuntu ID_LIKE=debian PRETTY_NAME=Ubuntu precise (12.04.5 LTS) VERSION_ID=12.04 ~$ (2) ~$ apt-cache policy firefox firefox: Installiert: 39.0+build5-0ubuntu0.12.04.1 Kandidat:39.0+build5-0ubuntu0.12.04.1 Versionstabelle: *** 39.0+build5-0ubuntu0.12.04.1 0 500 http://ppa.launchpad.net/ubuntu-mozilla-security/ppa/ubuntu/ precise/main i386 Packages 100 /var/lib/dpkg/status 38.0+build3-0ubuntu0.12.04.1 0 500 http://archive.ubuntu.com/ubuntu/ precise-updates/main i386 Packages 500 http://security.ubuntu.com/ubuntu/ precise-security/main i386 Packages 11.0+build1-0ubuntu4 0 500 http://archive.ubuntu.com/ubuntu/ precise/main i386 Packages (3) Firefox 39 should start up as Firefox 38 did (4) Yet, instead it crashes on startup all you can do is decide to send a bug report or not. No chance of using Firefox 39. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1471565/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1471563] Re: I can't type messages in the chat function when installing thunderbird-locale-zh-hant.
** Changed in: thunderbird (Ubuntu) Assignee: Leo (x50908) = (unassigned) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/1471563 Title: I can't type messages in the chat function when installing thunderbird-locale-zh-hant. Status in thunderbird package in Ubuntu: New Bug description: I use chat function to send messages to my facebook friends in the Windows thunderbird version very well. However, I do the same thing in the Linux Ubuntu, and it can be a nightmare! There's no space to type the messages! After asking for the Ubuntu community, I think this is a bug. ※The most important thing is, this bug only appear when you install the language pack thunderbird-locale-zh-hant! ※There is no problem when installing other language pack. The release of Ubuntu : unspecified The version of the package : unspecified To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/1471563/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1010421] Re: Text antialiasing is green.....
The workaround in #5 worked for me (Kubuntu 14.04, KDE 4.14.2). I guess I'll have to remember to disable sub-pixel rendering before starting GIMP :( -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gimp in Ubuntu. https://bugs.launchpad.net/bugs/1010421 Title: Text antialiasing is green. Status in gimp package in Ubuntu: Confirmed Bug description: g. So upgraded to Gimp 2.8 and now text antialaising is green. Use white text on a black background to check it out. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gimp/+bug/1010421/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472842] [NEW] Driver Blacklist
Public bug reported: Bug ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-22.22-generic 3.19.8-ckt1 Uname: Linux 3.19.0-22-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Thu Jul 9 10:21:49 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0152] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7788] InstallationDate: Installed on 2015-06-25 (13 days ago) InstallationMedia: It MachineType: MSI MS-7788 ProcEnviron: LANGUAGE=en_PH:en PATH=(custom, no user) LANG=en_PH.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-22-generic root=UUID=6e853639-c518-4298-873b-85f73833ffda ro vesafb.invalid=1 splash quiet nopat plymouth:debug=1=1=1 vt.handoff=7 SourcePackage: xorg UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/29/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V3.6 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H61M-P31/W8 (MS-7788) dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV3.6:bd09/29/2013:svnMSI:pnMS-7788:pvr1.0:rvnMSI:rnH61M-P31/W8(MS-7788):rvr1.0:cvnMSI:ct3:cvr1.0: dmi.product.name: MS-7788 dmi.product.version: 1.0 dmi.sys.vendor: MSI version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Thu Jul 9 10:19:02 2015 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputVideo BusKEYBOARD, id 7 inputPower Button KEYBOARD, id 8 input USB OPTICAL MOUSE MOUSE, id 9 inputAT Translated Set 2 keyboard KEYBOARD, id 10 xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.17.1-0ubuntu3 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug compiz-0.9 ubuntu vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1472842 Title: Driver Blacklist Status in xorg package in Ubuntu: New Bug description: Bug ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-22.22-generic 3.19.8-ckt1 Uname: Linux 3.19.0-22-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Thu Jul 9 10:21:49 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0152] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7788] InstallationDate: Installed on 2015-06-25 (13 days ago) InstallationMedia: It MachineType: MSI MS-7788 ProcEnviron: LANGUAGE=en_PH:en PATH=(custom, no user) LANG=en_PH.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-22-generic root=UUID=6e853639-c518-4298-873b-85f73833ffda ro vesafb.invalid=1 splash quiet nopat plymouth:debug=1=1=1 vt.handoff=7 SourcePackage: xorg UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/29/2013
[Desktop-packages] [Bug 1472890] [NEW] Enchant can't find en_US dictionary.
Public bug reported: When I start geany (which uses libenchant), I get the following message in a dialog window: The Enchant library couldn't be initialized (unknown error (maybe the chosen language is not available)). So I try to install enchant (a CLI interface to libenchant) $ sudo apt-get install enchant # no problems $ enchant -l IF\ FOUND.txt Couldn't create a dictionary for en_US.UTF-8 I looked around and couldn't find a missing dictionary I needed to install. I checked, and the problem recurs on a brand new LiveCD run. Any ideas on how to get enchant working again? It started about April, maybe when the 14.04.2 release came out (I'm still running 14.04.0, but with some upgraded packages). Sorry I didn't report it sooner. ** Affects: enchant (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to enchant in Ubuntu. https://bugs.launchpad.net/bugs/1472890 Title: Enchant can't find en_US dictionary. Status in enchant package in Ubuntu: New Bug description: When I start geany (which uses libenchant), I get the following message in a dialog window: The Enchant library couldn't be initialized (unknown error (maybe the chosen language is not available)). So I try to install enchant (a CLI interface to libenchant) $ sudo apt-get install enchant # no problems $ enchant -l IF\ FOUND.txt Couldn't create a dictionary for en_US.UTF-8 I looked around and couldn't find a missing dictionary I needed to install. I checked, and the problem recurs on a brand new LiveCD run. Any ideas on how to get enchant working again? It started about April, maybe when the 14.04.2 release came out (I'm still running 14.04.0, but with some upgraded packages). Sorry I didn't report it sooner. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/enchant/+bug/1472890/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1469089] Re: libxul.so cannot open shared object file
** Changed in: firefox (Ubuntu) Status: Confirmed = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to firefox in Ubuntu. https://bugs.launchpad.net/bugs/1469089 Title: libxul.so cannot open shared object file Status in firefox package in Ubuntu: Invalid Bug description: I am using firefox on ubuntu 12.04 and the current installed binary is firefox_38.0+build3-0ubuntu0.12.04.1_amd64.deb. STarting firefox from the dash fails and I get the error message: XPCOMGlueLoad error for file /usr/lib/firefox/libxul.so: /usr/lib/firefox/libxul.so: cannot open shared object file: Timer expired Couldn't load XPCOM. when attempting to start from the command line. I have not done anything recently other than run apt-get dist-upgrade and do not know what could be causing this. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1469089/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1416186] Re: Periodically loss of backlight control
[Expired for xorg (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xorg (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1416186 Title: Periodically loss of backlight control Status in xorg package in Ubuntu: Expired Bug description: Periodically there is a loss of control of the backlight control where trying to brighten the screen or dim it with the keyboard controls does not function and remains in its current state. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: xorg 1:7.7+7ubuntu2 ProcVersionSignature: Ubuntu 3.16.0-29.39-generic 3.16.7-ckt2 Uname: Linux 3.16.0-29-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.14.7-0ubuntu8.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Thu Jan 29 21:05:25 2015 DistUpgraded: Fresh install DistroCodename: utopic DistroVariant: ubuntu EcryptfsInUse: Yes ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G] [1002:990b] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:198a] Advanced Micro Devices, Inc. [AMD/ATI] Mars [Radeon HD 8670A/8670M/8750M] [1002:6600] (rev ff) (prog-if ff) InstallationDate: Installed on 2015-01-29 (0 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Alpha amd64 (20141015) MachineType: Hewlett-Packard HP ENVY TS 15 Notebook PC ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-29-generic.efi.signed root=UUID=1cc26cb0-3476-4abf-a12e-acac53ba8537 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/06/2014 dmi.bios.vendor: Insyde dmi.bios.version: F.18 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 198A dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 03.14 dmi.chassis.asset.tag: 5CG32129MN dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.18:bd11/06/2014:svnHewlett-Packard:pnHPENVYTS15NotebookPC:pvr088810305B032:rvnHewlett-Packard:rn198A:rvrKBCVersion03.14:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP ENVY TS 15 Notebook PC dmi.product.version: 088810305B032 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1 version.libgl1-mesa-dri: libgl1-mesa-dri 10.3.2-0ubuntu0.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.3.2-0ubuntu0.1 version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.4.0-2ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.914-1~exp1ubuntu4.1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2 xserver.bootTime: Thu Jan 29 20:59:15 2015 xserver.configfile: default xserver.errors: RADEON(G0): [XvMC] Failed to initialize extension. xserver.logfile: /var/log/Xorg.0.log xserver.version: 2:1.16.0-1ubuntu1.2 xserver.video_driver: radeon To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1416186/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1451109] Re: Probe is error
[Expired for xorg (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xorg (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1451109 Title: Probe is error Status in xorg package in Ubuntu: Expired Bug description: Error Time: boot time ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Sun May 3 07:37:38 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:17f3] InstallationDate: Installed on 2015-04-28 (4 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) MachineType: Hewlett-Packard HP ProBook 4440s ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-15-generic root=UUID=7c2d60f9-fb5e-4d55-ae77-66dd38cf0b6e ro splash quiet SourcePackage: xorg UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/07/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68IRR Ver. F.43 dmi.board.name: 17F3 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 58.20 dmi.chassis.asset.tag: hung dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68IRRVer.F.43:bd10/07/2013:svnHewlett-Packard:pnHPProBook4440s:pvrA1018C1100:rvnHewlett-Packard:rn17F3:rvrKBCVersion58.20:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4440s dmi.product.version: A1018C1100 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2build1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Sun May 3 07:31:36 2015 xserver.configfile: default xserver.errors: xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 901 vendor LGD xserver.version: 2:1.17.1-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1451109/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1451723] Re: Ubuntu 14.04 crush to login screen
[Expired for xorg (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xorg (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1451723 Title: Ubuntu 14.04 crush to login screen Status in xorg package in Ubuntu: Expired Bug description: This is turning to happen quite a lot lately, every time I login to and say click on Firefox, after say a few minutes browsing, Firefox freezes then the system crashes and throws me back to login screen.. If I log in again it does the same. Have to shut off computer and unplug leaving it for a few minutes before switching it back on with fingers crossed that it wont crash immediately. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-36.48~14.04.1-generic 3.16.7-ckt9 Uname: Linux 3.16.0-36-generic i686 NonfreeKernelModules: nvidia .proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0' .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86 Kernel Module 304.125 Mon Dec 1 19:55:52 PST 2014 GCC version: gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) .tmp.unity.support.test.0: ApportVersion: 2.14.1-0ubuntu3.10 Architecture: i386 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity Date: Tue May 5 09:49:35 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu DkmsStatus: nvidia-304, 304.125, 3.16.0-31-generic, i686: installed nvidia-304, 304.125, 3.16.0-33-generic, i686: installed nvidia-304, 304.125, 3.16.0-34-generic, i686: installed nvidia-304, 304.125, 3.16.0-36-generic, i686: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: NVIDIA Corporation G71 [GeForce 7900 GS] [10de:0292] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device [10de:0370] InstallationDate: Installed on 2015-03-17 (48 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release i386 (20150218.1) MachineType: Dell Inc. Dell DXP051 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-36-generic root=UUID=0c61d87e-ac8a-4b5a-9506-502e4287158b ro quiet splash SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/08/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: A07 dmi.board.name: 0FJ030 dmi.board.vendor: Dell Inc. dmi.chassis.type: 7 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA07:bd01/08/2007:svnDellInc.:pnDellDXP051:pvr:rvnDellInc.:rn0FJ030:rvr:cvnDellInc.:ct7:cvr: dmi.product.name: Dell DXP051 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.11.3+14.04.20150122-0ubuntu1 version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Tue May 5 09:30:35 2015 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputPixArt USB Optical Mouse MOUSE, id 8 inputDELL DELL USB Keyboard KEYBOARD, id 9 xserver.errors: open /dev/fb0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1451723/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1451255] Re: ubunku will boot only in recovery mode
[Expired for xorg (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xorg (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1451255 Title: ubunku will boot only in recovery mode Status in xorg package in Ubuntu: Expired Bug description: Help please. I am new with Ubuntu. I installed Ubuntu as my main and only operate system on my Lenovo leptop. But when I try to restart I can do it only in recovery mode. I tryied to reinstall Ubundo, but the issue didn't resolve. I can't restart and work with the computer normaly. Please assit. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: xorg 1:7.7+1ubuntu8.1 ProcVersionSignature: Ubuntu 3.16.0-36.48~14.04.1-generic 3.16.7-ckt9 Uname: Linux 3.16.0-36-generic x86_64 .tmp.unity.support.test.1: ApportVersion: 2.14.1-0ubuntu3.10 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Sun May 3 16:27:50 2015 DistUpgraded: Fresh install DistroCodename: trusty DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:381c] Subsystem: Lenovo Device [17aa:381c] InstallationDate: Installed on 2015-05-03 (0 days ago) InstallationMedia: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) MachineType: LENOVO 80FG ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-36-generic.efi.signed root=UUID=cb6de1e2-83f4-4e14-b431-e03cdcec8069 ro recovery nomodeset Renderer: Software SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/20/2014 dmi.bios.vendor: LENOVO dmi.bios.version: ABCN32WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: Lenovo Z70-80 dmi.board.vendor: LENOVO dmi.board.version: 31900058WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo Z70-80 dmi.modalias: dmi:bvnLENOVO:bvrABCN32WW:bd06/20/2014:svnLENOVO:pn80FG:pvrLenovoZ70-80:rvnLENOVO:rnLenovoZ70-80:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoZ70-80: dmi.product.name: 80FG dmi.product.version: Lenovo Z70-80 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.56-1~ubuntu2 version.libgl1-mesa-dri: libgl1-mesa-dri N/A version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A xserver.bootTime: Sun May 3 16:26:50 2015 xserver.configfile: default xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.16.0-1ubuntu1.2~trusty2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1451255/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1452255] Re: Xorg freeze - on lockscreen
[Expired for xorg (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xorg (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1452255 Title: Xorg freeze - on lockscreen Status in xorg package in Ubuntu: Expired Bug description: What I know for sure: Locked screen - machine was frozen when I got back after minutes/seconds. Has happened several times before but does not happen most/all of the time. Of course very annoying (so I'll switch from nouveau to propriatary as a desperate move.. I really do not want to, would rather file bugs and see them fixed. Filing is what I can do, do not trust myself to fix or debug as random. I may move back if it helps with debugging). I wouldn't have thought Xorg was to blame (maybe it isn't) as machine only freezes this way when I lock screen (yes, I get oom for chrome and almost freezes, but can get to a virtual terminal - eventually, but that is different). Also I've reported other bug about lockscreen where password field if missing. This seems unrelated as here it is not. In hte other bug the mouse pointer may not have been frozen (I can't remember for sure). [I have dual-screen, not sure if important - seemed to be for other bug..] CAPS LOCK etc. lights are frozen and can't go to virtual screen. Still FLock light toggles, I think only the keyboard handles that.. Going over updates not installed, nothing important seems missing (as the update-manager shows *now*), I frequently do not update everything. E.g. libdrm-intel1 should not matter, I updated nouveau version recently: 2015-04-21 13:47:52 status installed libdrm-nouveau2:amd64 2.4.60-2~ubuntu14.04.1 and booted before getting the freeze but at least this was updated but not rebooted before the freeze: 2015-05-04 09:35:32 upgrade libmetacity-private0a:amd64 1:2.34.13-0ubuntu4 1:2.34.13-0ubuntu4.1 2015-05-04 09:35:33 upgrade metacity-common:all 1:2.34.13-0ubuntu4 1:2.34.13-0ubuntu4.1 Last rebootprior to freeze(?): $ who -b /var/log/wtmp.1 |tail -1 system boot 2015-04-28 14:11 While I get no response to (other) keys, I see that the kernel sees them in syslog (all relevant there starting w/nouveau):. May 6 09:55:01 Vinnuryksugan CRON[14155]: (root) CMD (command -v debian-sa1 /dev/null debian-sa1 1 1) May 6 10:05:01 Vinnuryksugan CRON[14305]: (root) CMD (command -v debian-sa1 /dev/null debian-sa1 1 1) May 6 10:10:27 Vinnuryksugan kernel: [677054.614186] nouveau E[compiz[2344]] fail ttm_validate May 6 10:10:27 Vinnuryksugan kernel: [677054.614191] nouveau E[compiz[2344]] validate vram_list May 6 10:10:27 Vinnuryksugan kernel: [677054.614201] nouveau E[compiz[2344]] validate: -12 May 6 10:10:28 Vinnuryksugan kernel: [677055.299662] nouveau E[ PFIFO][:01:00.0] read fault at 0x000774 [PAGE_NOT_PRESENT] from PGRAPH/GPC0/TEX on channel 0x001fcba000 [compiz[2344]] May 6 10:10:28 Vinnuryksugan kernel: [677055.299688] nouveau E[ PGRAPH][:01:00.0] TRAP ch 4 [0x001fcba000 compiz[2344]] May 6 10:10:28 Vinnuryksugan kernel: [677055.299699] nouveau E[ PGRAPH][:01:00.0] GPC0/TPC0/TEX: 0x8049 May 6 10:10:28 Vinnuryksugan kernel: [677055.299703] nouveau E[ PGRAPH][:01:00.0] GPC0/TPC1/TEX: 0x8049 May 6 10:12:01 Vinnuryksugan CRON[14409]: (root) CMD (export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin [ -x /usr/sbin/uptrack-upgrade ] /usr/sbin/uptrack-upgrade --cron) May 6 10:12:09 Vinnuryksugan kernel: [677156.263221] nouveau E[Xorg[1177]] failed to idle channel 0x0001 [Xorg[1177]] May 6 10:12:24 Vinnuryksugan kernel: [677171.270132] nouveau E[Xorg[1177]] failed to idle channel 0x0001 [Xorg[1177]] May 6 10:12:26 Vinnuryksugan kernel: [677173.271187] nouveau E[ PFIFO][:01:00.0] playlist update failed May 6 10:12:41 Vinnuryksugan kernel: [677188.277961] nouveau E[Xorg[1177]] failed to idle channel 0x [Xorg[1177]] May 6 10:12:56 Vinnuryksugan kernel: [677203.284882] nouveau E[Xorg[1177]] failed to idle channel 0x [Xorg[1177]] May 6 10:12:58 Vinnuryksugan kernel: [677205.285829] nouveau E[ PFIFO][:01:00.0] channel 2 [Xorg[1177]] kick timeout May 6 10:12:58 Vinnuryksugan kernel: [677205.286008] nouveau W[ PFIFO][:01:00.0] INTR 0x0100: 0x000d May 6 10:13:00 Vinnuryksugan kernel: [677207.286827] nouveau E[ PFIFO][:01:00.0] playlist update failed May 6 10:13:04 Vinnuryksugan colord: device removed: xrandr-Dell Inc.-DELL P2312H-YJ3JX33IAFJM May 6 10:13:04 Vinnuryksugan colord: device removed: xrandr-Dell Inc.-DELL P2312H-YJ3JX33IAF8M May 6 10:13:04 Vinnuryksugan colord: Profile removed: icc-9b9c44d46f4e90a2402855cc59555af8 May 6 10:13:04 Vinnuryksugan colord: Profile
[Desktop-packages] [Bug 1451470] Re: :(
[Expired for xorg (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xorg (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1451470 Title: :( Status in xorg package in Ubuntu: Expired Bug description: nope ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.16.0-33.44-generic 3.16.7-ckt7 Uname: Linux 3.16.0-33-generic x86_64 NonfreeKernelModules: nvidia .proc.driver.nvidia.registry: Binary: .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 340.76 Thu Jan 22 12:11:08 PST 2015 GCC version: gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 Date: Mon May 4 17:37:30 2015 DistUpgraded: 2015-04-23 21:11:41,646 DEBUG enabling apt cron job DistroCodename: vivid DistroVariant: ubuntu DkmsStatus: bbswitch, 0.7, 3.16.0-33-generic, x86_64: installed nvidia-340, 340.76, 3.16.0-33-generic, x86_64: installed virtualbox, 4.3.26, 3.16.0-33-generic, x86_64: installed GraphicsCard: NVIDIA Corporation G98 [GeForce 8400 GS Rev. 2] [10de:06e4] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:34ed] InstallationDate: Installed on 2015-04-02 (32 days ago) InstallationMedia: Ubuntu 14.10 Utopic Unicorn - Release amd64 (20141022.1) MachineType: System manufacturer P5K-E ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-33-generic root=UUID=27248789-1fd5-435f-ad54-bdff681fcd91 ro quiet splash nomdmonddf nomdmonisw nomdmonddf nomdmonisw SourcePackage: xorg UpgradeStatus: Upgraded to vivid on 2015-04-23 (10 days ago) dmi.bios.date: 06/19/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1305 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P5K-E dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1305:bd06/19/2009:svnSystemmanufacturer:pnP5K-E:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5K-E:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: P5K-E dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2build1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Mon May 4 17:28:53 2015 xserver.configfile: default xserver.devices: inputPower Button KEYBOARD, id 6 inputPower Button KEYBOARD, id 7 inputA4TECH USB DeviceKEYBOARD, id 8 inputA4TECH USB DeviceMOUSE, id 9 inputCHICONY HP Basic USB Keyboard KEYBOARD, id 10 xserver.errors: open /dev/fb0: No such file or directory xserver.logfile: /var/log/Xorg.0.log xserver.outputs: xserver.version: 2:1.17.1-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1451470/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1452244] Re: Xorg does not work properly after suspend
[Expired for xorg (Ubuntu) because there has been no activity for 60 days.] ** Changed in: xorg (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1452244 Title: Xorg does not work properly after suspend Status in xorg package in Ubuntu: Expired Bug description: When woken up from suspend (either manually or by opening the lid), xorg will not display the screen properly: The frames will be shown, but text and buttons won't until a mouse over or new text is written. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3 Uname: Linux 3.19.0-16-generic x86_64 ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: MATE Date: Wed May 6 13:21:34 2015 InstallationDate: Installed on 2015-04-26 (9 days ago) InstallationMedia: Ubuntu-MATE 15.04 Vivid Vervet - Release amd64 (20150422.1) SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1452244/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1472573] Re: falha no inicio de sessão: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build
*** This bug is a duplicate of bug 1373136 *** https://bugs.launchpad.net/bugs/1373136 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug 1373136, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 1373136 nvidia-331-uvm 331.38-0ubuntu7.1: nvidia-331-uvm kernel module failed to build [nvidia-modules-common.mk: No such file or directory] -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu. https://bugs.launchpad.net/bugs/1472573 Title: falha no inicio de sessão: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build Status in nvidia-graphics-drivers-331 package in Ubuntu: New Bug description: Desconheco os detalhes. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331-uvm 331.113-0ubuntu0.0.4 ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4 Uname: Linux 3.13.0-34-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.1-0ubuntu3.11 Architecture: amd64 DKMSBuildLog: DKMS make.log for nvidia-331-uvm-331.113 for kernel 3.13.0-57-generic (x86_64) Ter Jul 7 09:54:01 BRT 2015 Makefile:216: /var/lib/dkms/nvidia-331/331.113/build/nvidia-modules-common.mk: Arquivo ou diretório não encontrado make: *** Sem regra para processar o alvo `/var/lib/dkms/nvidia-331/331.113/build/nvidia-modules-common.mk'. Pare. DKMSKernelVersion: 3.13.0-57-generic Date: Tue Jul 7 09:54:25 2015 InstallationDate: Installed on 2014-08-18 (323 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) PackageVersion: 331.113-0ubuntu0.0.4 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331-uvm 331.113-0ubuntu0.0.4: nvidia-331-uvm kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1472573/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1205511] Re: The lpr and lp can not print Multilingual (Japanese) characters .
[Expired for cups (Ubuntu) because there has been no activity for 60 days.] ** Changed in: cups (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1205511 Title: The lpr and lp can not print Multilingual (Japanese) characters . Status in cups package in Ubuntu: Expired Bug description: 1) The release of Ubuntu you are using, via 'lsb_release -rd' or System - About Ubuntu $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.04 Release: 13.04 Codename: raring 2) The version of the package you are using, via 'apt-cache policy pkgname' or by checking in Software Center cups-bsd: 1.6.2-1ubuntu5 cups-client: 1.6.2-1ubuntu5 cups-filters: 1.0.34-0ubuntu1.1 3) What you expected to happen I expected to print Japanese characters . ex. $ echo '星' | lpr I expected to lpr and lp to be able to print multilingual characters . 4) What happened instead But the printer printed '?' . ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: cups-bsd 1.6.2-1ubuntu5 ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2 Uname: Linux 3.8.0-26-generic i686 ApportVersion: 2.9.2-0ubuntu8.1 Architecture: i386 CupsErrorLog: W [27/Jul/2013:07:14:32 +0900] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_MG6200LAN W [27/Jul/2013:07:14:32 +0900] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_MG6200LAN W [27/Jul/2013:07:14:32 +0900] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_MG6200LAN W [27/Jul/2013:07:14:32 +0900] AddProfile failed: org.freedesktop.DBus.Error.UnknownMethod:No such interface `org.freedesktop.ColorManager' on object at path /org/freedesktop/ColorManager/devices/cups_MG6200LAN Date: Sat Jul 27 07:15:41 2013 InstallationDate: Installed on 2013-05-14 (73 days ago) InstallationMedia: Ubuntu 13.04 Raring - Build i386 LIVE Binary 20130430-17:57 Lpstat: device for MG6200LAN: cnijnet:/2C-9E-FC-03-2C-14 Lsusb: Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: innotek GmbH VirtualBox MarkForUpload: True Papersize: a4 PpdFiles: MG6200LAN: Canon MG6200 series Ver.3.60 ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=ja_JP.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-26-generic root=/dev/mapper/ubuntu--vg-root ro SourcePackage: cups UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr: dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH --- ApportVersion: 2.17.2-0ubuntu1 Architecture: amd64 CurrentDesktop: Unity DistroRelease: Ubuntu 15.04 InstallationDate: Installed on 2015-04-29 (10 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) Lpstat: device for Canon-PIXMA-MG6220: dnssd://Canon%20MG6200%20series._printer._tcp.local/ device for Generic-CUPS-PDF-Printer: cups-pdf:/ Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: innotek GmbH VirtualBox Package: cups 2.0.2-1ubuntu3 PackageArchitecture: amd64 Papersize: a4 PpdFiles: Error: command ['fgrep', '-H', '*NickName', 'Generic-CUPS-PDF-Printer.ppd', '/etc/cups/ppd/Canon-PIXMA-MG6220.ppd'] failed with exit code 2: /etc/cups/ppd/Generic-CUPS-PDF-Printer: Generic CUPS-PDF Printer grep: /etc/cups/ppd/Canon-PIXMA-MG6220.ppd: Permission denied ProcCmdline: BOOT_IMAGE=/boot/vmlinuz-3.19.0-16-generic root=UUID=87bf2e08-71a5-4d97-98b5-a3150b93acfa ro quiet splash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-16-generic root=UUID=87bf2e08-71a5-4d97-98b5-a3150b93acfa ro quiet splash ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3 Tags: vivid apparmor apparmor apparmor apparmor apparmor apparmor UdevLog: Error: [Errno 2] そのようなファイルやディレクトリはありません: '/var/log/udev' Uname: Linux 3.19.0-16-generic x86_64
[Desktop-packages] [Bug 1470997] Re: dhclient tries to send request over non-existent interface, floods syslog
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: network-manager (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1470997 Title: dhclient tries to send request over non-existent interface, floods syslog Status in network-manager package in Ubuntu: Confirmed Bug description: From time to time I'm using a Bluetooth network device (my cellphone). In Linux it shows as bnep0. However when disconnected, this device disappears from ifconfig -a output. Still dclient floods syslog with the following: Jul 2 22:09:59 void dhclient: DHCPDISCOVER on bnep0 to 255.255.255.255 port 67 interval 8 (xid=0x2c92a43c) Jul 2 22:09:59 void dhclient: send_packet: No such device or address Jul 2 22:09:59 void dhclient: dhclient.c:2094: Failed to send 300 byte long packet over bnep0 interface. That continues even after networking is disabled altogether. Also, every 15 seconds the following is logged: Jul 2 22:29:03 void dhclient: PRC: Renewing lease on wlan0. Jul 2 22:29:03 void dhclient: XMT: Renew on wlan0, interval 10180ms. Jul 2 22:29:03 void dhclient: RCV: Reply message on wlan0 from fe80::5a23:8cff:fea3:1ec5. Jul 2 22:29:03 void NetworkManager[948]: info (wlan0): DHCPv6 state changed renew6 - renew6 Jul 2 22:29:03 void NetworkManager[948]: info valid_lft 60 Jul 2 22:29:03 void NetworkManager[948]: info preferred_lft 30 Jul 2 22:29:03 void NetworkManager[948]: info address 2001:14ba:21f8:c00:e8b:fdff:fea1:4a1e Jul 2 22:29:03 void NetworkManager[948]: info nameserver '2001:14b8:1000::1' Jul 2 22:29:03 void NetworkManager[948]: info nameserver '2001:14b8:1000::2' Jul 2 22:29:03 void NetworkManager[948]: info domain search 'bb.dnainternet.fi.' Jul 2 22:29:03 void dbus[1025]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jul 2 22:29:03 void systemd[1]: Starting Network Manager Script Dispatcher Service... Jul 2 22:29:03 void dbus[1025]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jul 2 22:29:03 void systemd[1]: Started Network Manager Script Dispatcher Service. Given that bnep0 interface does not exist, the problem most likely is not in the dhclient itself, but something else that configures it to use non-existent interface. System information: # lsb_release -rd Description: Ubuntu 15.04 Release: 15.04 # uname -a Linux void 3.19.0-21-generic #21-Ubuntu SMP Sun Jun 14 18:31:11 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source interfaces.d/* # ls /etc/network/interfaces.d virbr0 # cat /etc/network/interfaces.d/virbr0 auto br0 iface br0 inet static address 10.21.32.1 network 10.21.32.0 netmask 255.255.255.0 broadcast 10.21.32.255 #gateway 10.21.32.1 bridge_ports dummy0 ##bridge_fd 9 ##bridge_hello 2 ##bridge_maxage 12 bridge_max_wait 0 bridge_stp off # apt-cache policy isc-dhcp-client isc-dhcp-client: Installed: 4.3.1-5ubuntu2.2 Candidate: 4.3.1-5ubuntu2.2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1470997/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1068803] Re: clipboard sync is not always working
Still an issue in 15.04. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to remmina in Ubuntu. https://bugs.launchpad.net/bugs/1068803 Title: clipboard sync is not always working Status in remmina package in Ubuntu: Confirmed Bug description: The clipboard syn on 12.10 remmina 1.0.0-1ubuntu8 is not always working correctly, after some while it doesn't sync anymore. The workaround I found is when I downgrade to remmina 1.0.0-1ubuntu6.1 from 12.04 clipboard aync works correctly again. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: remmina 1.0.0-1ubuntu8 Uname: Linux 3.6.2-030602-generic x86_64 ApportVersion: 2.6.1-0ubuntu3 Architecture: amd64 Date: Fri Oct 19 21:09:53 2012 InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Beta amd64 (20120926) SourcePackage: remmina UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/remmina/+bug/1068803/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 160311] Re: Resizing windows by grabbing window borders is difficult
Alt + F8 on MATE will activate resize for the currently selected window. ** Changed in: ubuntu-mate Status: New = Opinion -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to light-themes in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/160311 Title: Resizing windows by grabbing window borders is difficult Status in Ayatana Design: Fix Released Status in Decorator for compiz-fusion: New Status in One Hundred Papercuts: Fix Released Status in The Metacity Window Manager: In Progress Status in Ubuntu MATE: Opinion Status in Release Notes for Ubuntu: Fix Released Status in Unity: Fix Released Status in Unity 2D: Invalid Status in light-themes package in Ubuntu: Fix Released Status in unity package in Ubuntu: Confirmed Bug description: This bug is fixed in unity-3d since ubuntu 11.04. It still exists in unity-2d and will never be fixed as unity-2d is no longer supported since ubuntu 12.10 (see comment #343). * This should mostly be fixed for Natty and might get backported to earlier releases as well. For Precise (12.04) this is again broken for unity-2d (as of 17.7.2012 unity-2d 5.12.0-0ubuntu1.1). Note that if the window has a scrollbar, you can grab that to resize the window. If not, you are stuck with the 1px border. Workaround: NONE KNOWN (see comment 320)? * *Blueprint for Natty, Ubuntu 11.04: https://blueprints.edge.launchpad.net/ubuntu/+spec/packageselection- dx-n-resizing-windows Work items1 * Make sure the new resize grip fits in current applications; doesn't interfere with anything. We should make some noise about this during the Natty cycle so people keep their eyes open and file bugs. 2 * Invisible window resize area - around 3px invisible area to allow resize on all sides. * Working grip backported to gtk2 already available in ppa : https://launchpad.net/~bratsche/+archive/gtk * Workaround for Compiz/Unity: Alt+Middlemousebutton resizes a window most comfortably. Workaround: Edit /usr/share/themes/Ambiance/metacity-1/metacity- theme-1.xml. Set the following values in frame_geometry_normal as desired: distance name=left_width value=3/ distance name=right_width value=3/ distance name=bottom_height value=3/ Binary package hint: metacity - The issue has been an issue for users (especially of large) screens for several releases- Trackpad users seem to be particularly impacted by this- The issue appears to have been significantly aggravated in Lucid by changing the border width from 3 pixels to 1 pixel The window borders in metacity are far too thin to be used for comfortable window resizing, and resize handles are not available in all applications (or even most). In fact, of all the windows I have open right now, not a single one of them has a resize handle. The result is that I get a lot of misses when I try to drag a window border, which usually results in my clicking on the wrong window altogether. The best fix for this usability bug is to create an invisible region around each non-maximized window about 4px thick that can be used for resizing (in addition to the visible border). Or perhaps there should be a border thickness option on the System Preferences Windows dialog (although the default thickness should still be increased considerably). Ideally all windows would also have a resize handle but I realize that these have to be application controlled (at least that seems to be the position of the metacity team). To manage notifications about this bug go to: https://bugs.launchpad.net/ayatana-design/+bug/160311/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp