[Desktop-packages] [Bug 1520887] Re: Workaround Ubuntu 15.10. Network manager applet cannot stably activate mobile broadband using 4G USB modem ZTE MF820D.

2016-01-06 Thread Launchpad Bug Tracker
Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: network-manager (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1520887

Title:
  Workaround Ubuntu 15.10. Network manager applet cannot stably activate
  mobile broadband using 4G USB modem ZTE MF820D.

Status in network-manager package in Ubuntu:
  Confirmed

Bug description:
  Hi,

  I use Ubuntu 15.10, I have done a fresh install formerly using 14.04
  on the same hardware setup.

  If I boot Ubuntu from power-off, then I must sometimes enter the PIN-
  code for the mobile broadband SIM-card, I also get prompted for my
  password (to make changes to the mobile broadband device); however,
  most of the time only my password is needed, and the saved PIN-code is
  used.

  After entering my password the 4G-USB-modem gets green light for
  establishing an 4G (or 3G) connection, but it is impossible to connect
  to the 4G-internet from the desktop drop down menu of network manager
  at this stage; I get an error message: "(Translated from Swedish-
  Activate connection failure) Creating object for path
  '/org/freedesktop/NetworkManager/ActiveConnection/1' failed in libnm-
  glib."

  (I have set up this 4G-internet-connention with help from the network-
  manager wizard, using defaults, except turning off roaming and setting
  "allow all users to connect.")

  However, if I choose to reboot without power-off, the green light on
  the USB-modem stays on during the reboot (keeps 4G-connected I
  presume), then it is possible to connect to internet from the drop
  down menu, most of the time. Some times I also had to deactivate-
  activate mobile broadband from the drop down menu before internet
  connection could be established.

  It is also not possible to edit the connections of the mobile broadband in 
the network manager applet; I get an error message: "(Translated from 
Swedish-Error initiating editor) settings/nm-settings-connection.c.955 - 
Connection didn't have requested setting 'ppp'".
  Editing the wifi-connection works just fine.

  Regards

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: network-manager 1.0.4-0ubuntu5.1
  ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
  Uname: Linux 4.2.0-18-generic x86_64
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Sun Nov 29 07:44:12 2015
  IfupdownConfig:
   # interfaces(5) file used by ifup(8) and ifdown(8)
   auto lo
   iface lo inet loopback
  IpRoute:
   default via 95.192.135.45 dev wwx0eb79c89dc58  proto static  metric 750
   95.192.135.44/30 dev wwx0eb79c89dc58  proto kernel  scope link  src 
95.192.135.46  metric 750
   169.254.0.0/16 dev wwx0eb79c89dc58  scope link  metric 1000
  NetworkManager.state:
   [main]
   NetworkingEnabled=true
   WirelessEnabled=true
   WWANEnabled=true
   WimaxEnabled=true
  ProcEnviron:
   LANGUAGE=sv
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=sv_SE.UTF-8
   SHELL=/bin/bash
  SourcePackage: network-manager
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-dev:
   DEVICETYPE  STATE DBUS-PATH  
CONNECTION  CON-UUID  CON-PATH
   cdc-wdm1  gsm   connected /org/freedesktop/NetworkManager/Devices/3  
Telia Telia 4G  d851a986-be40-488b-9f96-36d2c9387b57  
/org/freedesktop/NetworkManager/ActiveConnection/5
   wlp3s0wifi  disconnected  /org/freedesktop/NetworkManager/Devices/2  
--  ----
   enp4s0ethernet  unavailable   /org/freedesktop/NetworkManager/Devices/1  
--  ----
   loloopback  unmanaged /org/freedesktop/NetworkManager/Devices/0  
--  ----
  nmcli-nm: Error: command ['nmcli', '-f', 'all', 'nm'] failed with exit code 
2: Error: Object 'nm' is unknown, try 'nmcli help'.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1520887/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 942255] Re: Ability to save or export results

2016-01-06 Thread Daniel Antonio
What about k4dirstat?, is not the "cache file" something similar?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to baobab in Ubuntu.
https://bugs.launchpad.net/bugs/942255

Title:
  Ability to save or export results

Status in baobab package in Ubuntu:
  Confirmed

Bug description:
  It would be nice if Baobab had the ability to save or export disk
  usage analysis results.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/baobab/+bug/942255/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1512394] Re: Desktop icons are places outside visible area on a dual monitor system.

2016-01-06 Thread Launchpad Bug Tracker
[Expired for xorg (Ubuntu) because there has been no activity for 60
days.]

** Changed in: xorg (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1512394

Title:
  Desktop icons are places outside visible area on a dual monitor
  system.

Status in xorg package in Ubuntu:
  Expired

Bug description:
  Some of the desktop icons are placed outside of the visible area. It
  seems as if the actual desktop area is greater than what is displayed
  by the screen.

  I have a dual monitor setup. The primary screen is connected to the
  VGA port of my laptop. The laptop's screen is configured as secondary
  and is placed on the left.

  The native resolution of both screens is 1920x1080. However, since the
  built in screen of my laptop is small, it is set to 1360x768. The
  primary screen is set to its native resolution.

  If I sort the icons by name, the are moved to the secondary screen
  with the lower resolution and some of the icons are out of the visible
  range so I cannot access them.

  If I change the resolution of the secondary screen to its native
  resolution, I do find the icons in the top corner of the desktop.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  ProcVersionSignature: Ubuntu 3.16.0-50.67~14.04.1-generic 3.16.7-ckt16
  Uname: Linux 3.16.0-50-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.15
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Mon Nov  2 14:59:16 2015
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  DpkgLog:
   
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 0b) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:220c]
  InstallationDate: Installed on 2015-02-25 (249 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 
(20150218.1)
  MachineType: LENOVO 20ARS1NW00
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-50-generic.efi.signed 
root=UUID=6d760634-ce0e-46e1-aa6f-ec5438dfbf34 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  Symptom: display
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 01/09/2015
  dmi.bios.vendor: LENOVO
  dmi.bios.version: GJET82WW (2.32 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20ARS1NW00
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0E50512 STD
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrGJET82WW(2.32):bd01/09/2015:svnLENOVO:pn20ARS1NW00:pvrThinkPadT440s:rvnLENOVO:rn20ARS1NW00:rvrSDK0E50512STD:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 20ARS1NW00
  dmi.product.version: ThinkPad T440s
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri N/A
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx N/A
  version.xserver-xorg-core: xserver-xorg-core N/A
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
  version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
  version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A
  xserver.bootTime: Mon Nov  2 14:42:39 2015
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id2093 
   vendor SAM
  xserver.version: 2:1.16.0-1ubuntu1.2~trusty2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1512394/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1512634] Re: Mouse pointer gets distorted / broken on dual screen setup

2016-01-06 Thread Launchpad Bug Tracker
[Expired for xorg (Ubuntu) because there has been no activity for 60
days.]

** Changed in: xorg (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1512634

Title:
  Mouse pointer gets distorted / broken on dual screen setup

Status in xorg package in Ubuntu:
  Expired

Bug description:
  The mouse pointer is fine at boot, but after working a couple of
  minutes it gets distorted. I move my mouse pointer back and forth
  between my two screens all the time. The actual distortion happends
  randomly on the "screen swich" and when I move my pointer on one of my
  screens. Sometimes I can see a slightly distortion and if I move my
  mouse pointer on top of a scrollbar its back to normal. But just for a
  little while, then its permanently distorted. And it happends only on
  one of the screens, never on both at the same time.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  ProcVersionSignature: Ubuntu 3.13.0-66.108-generic 3.13.11-ckt27
  Uname: Linux 3.13.0-66-generic x86_64
  NonfreeKernelModules: fglrx
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.18
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Tue Nov  3 10:39:02 2015
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  DkmsStatus:
   fglrx-core, 15.200, 3.13.0-62-generic, x86_64: installed
   fglrx-core, 15.200, 3.13.0-63-generic, x86_64: installed
   fglrx-core, 15.200, 3.13.0-65-generic, x86_64: installed
   fglrx-core, 15.200, 3.13.0-66-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Hawaii PRO [Radeon R9 290] 
[1002:67b1] (prog-if 00 [VGA controller])
 Subsystem: XFX Pine Group Inc. Device [1682:9295]
  InstallationDate: Installed on 2014-12-19 (318 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  MachineType: To be filled by O.E.M. To be filled by O.E.M.
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-66-generic 
root=UUID=f0b5450d-3c23-49f1-b3e8-4544b9af89d7 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/22/2011
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 0705
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: SABERTOOTH 990FX
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev 1.xx
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr0705:bd08/22/2011:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKComputerINC.:rnSABERTOOTH990FX:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To be filled by O.E.M.
  dmi.product.version: To be filled by O.E.M.
  dmi.sys.vendor: To be filled by O.E.M.
  version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
  version.fglrx-installer: fglrx-installer N/A
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.5
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.5
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.6
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Tue Nov  3 08:41:57 2015
  xserver.configfile: default
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.15.1-0ubuntu2.7
  xserver.video_driver: fglrx

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1512634/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1512402] Re: Corrupted display of Qt4 Applications

2016-01-06 Thread Launchpad Bug Tracker
[Expired for xorg (Ubuntu) because there has been no activity for 60
days.]

** Changed in: xorg (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1512402

Title:
  Corrupted display of Qt4 Applications

Status in xorg package in Ubuntu:
  Expired

Bug description:
  When I run Qt4 based Applications either from konsole or from Creator the 
windows' content will look very disturbed, rendering the program absolutely 
useless. This happens only if Android Studio is running at the same time 
(Version 1.4, JDK 1.7.0_79). If I close Ansroid Studio (almost) everything is 
fine again. (Well almost, as there's also a problem with Qt4 command link 
buttons and HiDPI displays, but that's another story.)
  The applies for file dialogs in chromium (it uses kde4 libs, I suppose?). 
When AS is running, the file dialogs will be unusable, if I close it all is 
good.
  I haven't tested it with other Java based applications yet, so it might just 
be the JDK. (It's the Oracle one, I think, or whatever Google makes you 
download.)

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 4.2.0-16.19-generic 4.2.3
  Uname: Linux 4.2.0-16-generic x86_64
  NonfreeKernelModules: wl
  ApportVersion: 2.19.1-0ubuntu4
  Architecture: amd64
  CurrentDesktop: KDE
  Date: Mon Nov  2 17:05:36 2015
  InstallationDate: Installed on 2015-06-01 (154 days ago)
  InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  ProcEnviron:
   LANGUAGE=
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: xorg
  Symptom: display
  UpgradeStatus: Upgraded to wily on 2015-10-26 (6 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1512402/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1512066] Re: Desktop screen and icon corruption

2016-01-06 Thread Launchpad Bug Tracker
[Expired for xorg (Ubuntu) because there has been no activity for 60
days.]

** Changed in: xorg (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1512066

Title:
  Desktop screen and icon corruption

Status in xorg package in Ubuntu:
  Expired

Bug description:
  This is now the 3 rd time to reinstall 15.10.  Previously the 15.04 version 
has been re-installed.
  Under 15.04 the problem (bug) was restricted to the desktop background image 
in that after a few days and new updates loaded the screen became corrupted 
with the appearance of a view like looking through opaque reed glass. The blame 
was put on 'Variety' which was in use. Peter Levi terms this problem a 'low key 
bug'? It makes no difference whether 'Variety' is in use or not
  As the problem (bug) only affected the desktop background then it was 
workable.
  The new release of 15.10 was hoped to iron out the problem, but once again 
after receiving updates corruption began, and is much more severe in that icons 
become distorted when the mouse passes over them sections of text work become 
a. invisible or b. distorted to be unreadable.
  To date I have re-installed 15.10 four times. Everything is stable until I 
begin to accept updates. and the corruption begins.
  I have brought up this problem before since 23 rd October. 
  I cannot be the only individual suffering from this problem. I have two 
machines and the results are the same on both. I have changed monitors to no 
avail. 
  The programme was re-installed yesterday and is stable without any updates.
  I run also windows 10 on this machine but have experienced no problems with 
display or documents text/ icons

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
  Uname: Linux 3.19.0-15-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Sun Nov  1 08:34:28 2015
  DistUpgraded: Fresh install
  DistroCodename: vivid
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Intel Corporation 4 Series Chipset Integrated Graphics Controller 
[8086:2e12] (rev 03) (prog-if 00 [VGA controller])
 Subsystem: Hewlett-Packard Company Device [103c:3034]
 Subsystem: Hewlett-Packard Company Device [103c:3034]
  InstallationDate: Installed on 2015-10-31 (0 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  MachineType: Hewlett-Packard HP Compaq dc7900 Small Form Factor
  ProcEnviron:
   LANGUAGE=en_GB:en
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-15-generic 
root=UUID=551edabd-9342-4276-8f47-bf3c3b2b5894 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  Symptom: display
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/25/2009
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: 786G1 v01.22
  dmi.board.asset.tag: CZC9468YXF
  dmi.board.name: 3031h
  dmi.board.vendor: Hewlett-Packard
  dmi.chassis.asset.tag: CZC9468YXF
  dmi.chassis.type: 4
  dmi.chassis.vendor: Hewlett-Packard
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvr786G1v01.22:bd08/25/2009:svnHewlett-Packard:pnHPCompaqdc7900SmallFormFactor:pvr:rvnHewlett-Packard:rn3031h:rvr:cvnHewlett-Packard:ct4:cvr:
  dmi.product.name: HP Compaq dc7900 Small Form Factor
  dmi.sys.vendor: Hewlett-Packard
  version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917-1~exp1ubuntu2build1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2build1
  xserver.bootTime: Sun Nov  1 06:50:42 2015
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   
  xserver.version: 2:1.17.1-0ubuntu3

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1512066/+subscriptions

-- 
Mailing list: htt

[Desktop-packages] [Bug 1511380] Re: bug report was sent automaticly by computer bug report

2016-01-06 Thread Launchpad Bug Tracker
[Expired for xorg (Ubuntu) because there has been no activity for 60
days.]

** Changed in: xorg (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1511380

Title:
  bug report was sent automaticly by computer bug report

Status in xorg package in Ubuntu:
  Expired

Bug description:
  font issue kept coming up on boot

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  ProcVersionSignature: Ubuntu 3.19.0-32.37~14.04.1-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-32-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.18
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: kwin
  Date: Thu Oct 29 03:39:56 2015
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  DkmsStatus:
   ndiswrapper, 1.59, 3.19.0-31-generic, x86_64: installed
   ndiswrapper, 1.59, 3.19.0-32-generic, x86_64: installed
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] RS780 [Radeon HD 3200] [1002:9610] 
(prog-if 00 [VGA controller])
 Subsystem: Dell Device [1028:040f]
  InstallationDate: Installed on 2015-10-14 (15 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  MachineType: Dell Inc. Inspiron 400
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-32-generic 
root=UUID=185e2afa-a11e-4f55-9c48-6ffd2c8f6a4a ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 09/04/2009
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A01
  dmi.board.name: 03D1TV
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 3
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: Not Specified
  dmi.modalias: 
dmi:bvnDellInc.:bvrA01:bd09/04/2009:svnDellInc.:pnInspiron400:pvr00:rvnDellInc.:rn03D1TV:rvrA00:cvnDellInc.:ct3:cvrNotSpecified:
  dmi.product.name: Inspiron 400
  dmi.product.version: 00
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri N/A
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx N/A
  version.xserver-xorg-core: xserver-xorg-core N/A
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
  version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
  version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A
  xserver.bootTime: Thu Oct 29 03:16:28 2015
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputUSB Optical MouseMOUSE, id 8
   inputLogitech K360KEYBOARD, id 9
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.17.1-0ubuntu3.1~trusty1
  xserver.video_driver: radeon

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1511380/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1499138] Re: Firefox versions since 28.0 need too much memory

2016-01-06 Thread Launchpad Bug Tracker
[Expired for firefox (Ubuntu) because there has been no activity for 60
days.]

** Changed in: firefox (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1499138

Title:
  Firefox versions since 28.0 need too much memory

Status in firefox package in Ubuntu:
  Expired

Bug description:
  I use Firefox 28, because on every single version since then, it crashes 
after trying to load up my windows/tabs.
  It seems very slow to even display the windows, then it sits there for a 
while, then everything disappears and the "Firefox has crashed" window comes up.

  The most recent version of FF available to me is now 39.

  Just today, I thought of invoking FF from a terminal, to see if any useful 
messages would be displayed.
  (Yes, I should have thought of it long before!)

  In fact, there was: twice, "out of memory:" was displayed, with a different 
number of "bytes requested"
  (once with "0x00165159" (1462617), the other time with 
"0x0023FFE3" (2359267) )

  The last time, 
  "Assertion failure: [unhandlable oom] Failed to allocate object while 
tenuring., at /build/firefox-D3pzHr/firefox-39.0+build5/js/src/jscntxt.cpp:1195"
  was printed.
  "Failed to allocate object" smacks of not enough memory, also...(although I 
have no idea what the rest of the message means...)

  I used htop to try to track memory usage as FF was being loaded, after all 
windows were started 
  (trying to do it before is useless, as it just displays them on top of htop 
and I cannot see it).

  I have 4GB of memory.

  Anyway, htop shows about 650MB in use before FF 28, then as it loads, it goes 
up to ~1800MB, then drops back to ~1400MB.
  with FF39, it is over 3000MB when FF crashes, then of course drops back down.

  This is with the exact same number of windows (8) and tabs (many).

  Why would FF 39 need ~2350MB, when FF 28 only needs ~1150MB.  This is
  about double the usage!

  -Scott Jacobs
  --
  scott@scott-ASUS-M2N68-AM-PLUS:~$ uname -a
  Linux scott-ASUS-M2N68-AM-PLUS 3.16.0-44-generic #59-Ubuntu SMP Tue Jul 7 
02:14:37 UTC 2015 i686 athlon i686 GNU/Linux
  scott@scott-ASUS-M2N68-AM-PLUS:~$ lsb_release -dsc
  Ubuntu 14.10
  utopic
  scott@scott-ASUS-M2N68-AM-PLUS:~$ echo $DESKTOP_SESSION
  Lubuntu
  Firefox versions:
  Installed version: 28.0+build2-0ubuntu2
  Available version: 39.0+build5-0ubuntu0.14.10.1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1499138/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1512104] Re: video driver broken

2016-01-06 Thread Launchpad Bug Tracker
[Expired for xorg (Ubuntu) because there has been no activity for 60
days.]

** Changed in: xorg (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1512104

Title:
  video driver broken

Status in xorg package in Ubuntu:
  Expired

Bug description:
  since kernel update(3.16.0-51-generic), intel video driver not loaded, 
unity_support_test shows 
  OpenGL vendor string:   VMware, Inc.
  OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits)

  graphics performance really slow.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  ProcVersionSignature: Ubuntu 3.16.0-51.69~14.04.1-generic 3.16.7-ckt17
  Uname: Linux 3.16.0-51-generic x86_64
  .tmp.unity.support.test.1:
   
  ApportVersion: 2.14.1-0ubuntu3.18
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Sun Nov  1 15:46:55 2015
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] 
(rev 02) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:215a]
  InstallationDate: Installed on 2015-05-08 (177 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 
(20150218.1)
  MachineType: LENOVO 36805B8
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-51-generic 
root=UUID=89e51720-795c-4552-afd6-a51269a8a429 ro splash quiet vt.handoff=7
  Renderer: Software
  SourcePackage: xorg
  Symptom: display
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 10/11/2012
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 6QET70WW (1.40 )
  dmi.board.name: 36805B8
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr6QET70WW(1.40):bd10/11/2012:svnLENOVO:pn36805B8:pvrThinkPadX201:rvnLENOVO:rn36805B8:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 36805B8
  dmi.product.version: ThinkPad X201
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri N/A
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx N/A
  version.xserver-xorg-core: xserver-xorg-core N/A
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
  version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
  version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A
  xserver.bootTime: Sun Nov  1 15:34:11 2015
  xserver.configfile: default
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   
  xserver.version: 2:1.16.0-1ubuntu1.2~trusty2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1512104/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1509689] Re: the system running low graphics mode

2016-01-06 Thread Launchpad Bug Tracker
[Expired for xorg (Ubuntu) because there has been no activity for 60
days.]

** Changed in: xorg (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1509689

Title:
  the system running low graphics mode

Status in xorg package in Ubuntu:
  Expired

Bug description:
  I installed ubuntu 4.14 with xfce, but the message "the system running
  low graphics mode" appears and now I can not get into the Graphical
  Ubuntu mode.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  ProcVersionSignature: Ubuntu 3.16.0-51.69~14.04.1-generic 3.16.7-ckt17
  Uname: Linux 3.16.0-51-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.16
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  CurrentDesktop: XFCE
  Date: Sat Oct 24 15:35:57 2015
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  DkmsStatus: nvidia-304, 304.128, 3.16.0-51-generic, x86_64: installed
  GraphicsCard:
   Intel Corporation 2nd Generation Core Processor Family Integrated Graphics 
Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:3977]
  InstallationDate: Installed on 2015-03-13 (224 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 
(20150218.1)
  MachineType: LENOVO 20149
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-51-generic 
root=UUID=45388c46-5638-4327-bdaf-25ee64a3f3ea ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 12/19/2012
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 5ECN95WW(V9.00)
  dmi.board.asset.tag: No Asset Tag
  dmi.board.name: INVALID
  dmi.board.vendor: LENOVO
  dmi.board.version: 3194WIN8 STD SGL
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Lenovo G480
  dmi.modalias: 
dmi:bvnLENOVO:bvr5ECN95WW(V9.00):bd12/19/2012:svnLENOVO:pn20149:pvrLenovoG480:rvnLENOVO:rnINVALID:rvr3194WIN8STDSGL:cvnLENOVO:ct10:cvrLenovoG480:
  dmi.product.name: 20149
  dmi.product.version: Lenovo G480
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.65+git20151019.3045523d-0ubuntu0ricotz~trusty
  version.libgl1-mesa-dri: libgl1-mesa-dri 
11.0.2+git20151008+11.0.b1230e3e-0ubuntu0ricotz~trusty
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 
11.0.2+git20151008+11.0.b1230e3e-0ubuntu0ricotz~trusty
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20151015.6861391f-0ubuntu0sarvatt~trusty
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A
  xserver.bootTime: Sat Oct 24 15:28:08 2015
  xserver.configfile: default
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   17740 
   vendor SEC
  xserver.version: 2:1.15.1-0ubuntu2.7

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1509689/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1512748] Re: blabla

2016-01-06 Thread Launchpad Bug Tracker
[Expired for xorg (Ubuntu) because there has been no activity for 60
days.]

** Changed in: xorg (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1512748

Title:
  blabla

Status in xorg package in Ubuntu:
  Expired

Bug description:
  bla bla

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  ProcVersionSignature: Ubuntu 3.13.0-55.94-generic 3.13.11-ckt20
  Uname: Linux 3.13.0-55-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.18
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Tue Nov  3 16:18:27 2015
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  GraphicsCard:
   Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] 
(rev 02) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:215a]
  InstallationDate: Installed on 2014-08-20 (439 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  MachineType: LENOVO 2537KL6
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-55-generic 
root=/dev/mapper/ubuntu--vg-root ro drm.debug=0xe plymouth:debug
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 05/09/2011
  dmi.bios.vendor: LENOVO
  dmi.bios.version: 6IET77WW (1.37 )
  dmi.board.name: 2537KL6
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Available
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvr6IET77WW(1.37):bd05/09/2011:svnLENOVO:pn2537KL6:pvrThinkPadT410:rvnLENOVO:rn2537KL6:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 2537KL6
  dmi.product.version: ThinkPad T410
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.5
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.5
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.6
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Tue Nov  3 10:34:37 2015
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id   16438 
   vendor LEN
  xserver.version: 2:1.15.1-0ubuntu2.7

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1512748/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 808752] Re: GLib-ERROR **: Cannot create pipe main loop wake-up: Too many open files

2016-01-06 Thread Chelmite
I'm still getting truncated messages when they are moved to folders by my 
message filters.
security/limits.conf contains:
@skelem hard nofile 16384
@skelem soft nofile 16384

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/808752

Title:
  GLib-ERROR **: Cannot create pipe main loop wake-up: Too many open
  files

Status in thunderbird package in Ubuntu:
  Confirmed

Bug description:
  Since the weekend, thunderbird has become very unstable.  Crashing
  within a minute of every startup.

  $ thunderbird 
  enigmail.js: Registered components

  (thunderbird-bin:4807): Gtk-WARNING **: Error loading theme icon
  'dialog-warning' for stock: Error opening file: Too many open files

  (thunderbird-bin:4807): GLib-GObject-CRITICAL **: g_object_unref:
  assertion `G_IS_OBJECT (object)' failed

  ** (thunderbird-bin:4807): CRITICAL **:
  murrine_style_draw_render_icon: assertion `base_pixbuf != NULL' failed

  (thunderbird-bin:4807): Gtk-CRITICAL **: IA__gtk_style_render_icon:
  assertion `pixbuf != NULL' failed

  (thunderbird-bin:4807): GLib-GObject-CRITICAL **: g_object_ref:
  assertion `G_IS_OBJECT (object)' failed

  GLib-ERROR **: Cannot create pipe main loop wake-up: Too many open files
  Trace/breakpoint trap (core dumped)

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: thunderbird 5.0+build1+nobinonly-0ubuntu5
  ProcVersionSignature: Ubuntu 3.0-3.4-generic 3.0.0-rc5
  Uname: Linux 3.0-3-generic x86_64
  NonfreeKernelModules: wl
  Architecture: amd64
  Date: Mon Jul 11 13:12:18 2011
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Alpha amd64+mac (20101218)
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: thunderbird
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/808752/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 808752] Re: GLib-ERROR **: Cannot create pipe main loop wake-up: Too many open files

2016-01-06 Thread Chelmite
Every so often, thunderbird asks to compact my folders. Is it keeping
them open after compacting? It shouldn't.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/808752

Title:
  GLib-ERROR **: Cannot create pipe main loop wake-up: Too many open
  files

Status in thunderbird package in Ubuntu:
  Confirmed

Bug description:
  Since the weekend, thunderbird has become very unstable.  Crashing
  within a minute of every startup.

  $ thunderbird 
  enigmail.js: Registered components

  (thunderbird-bin:4807): Gtk-WARNING **: Error loading theme icon
  'dialog-warning' for stock: Error opening file: Too many open files

  (thunderbird-bin:4807): GLib-GObject-CRITICAL **: g_object_unref:
  assertion `G_IS_OBJECT (object)' failed

  ** (thunderbird-bin:4807): CRITICAL **:
  murrine_style_draw_render_icon: assertion `base_pixbuf != NULL' failed

  (thunderbird-bin:4807): Gtk-CRITICAL **: IA__gtk_style_render_icon:
  assertion `pixbuf != NULL' failed

  (thunderbird-bin:4807): GLib-GObject-CRITICAL **: g_object_ref:
  assertion `G_IS_OBJECT (object)' failed

  GLib-ERROR **: Cannot create pipe main loop wake-up: Too many open files
  Trace/breakpoint trap (core dumped)

  ProblemType: Bug
  DistroRelease: Ubuntu 11.10
  Package: thunderbird 5.0+build1+nobinonly-0ubuntu5
  ProcVersionSignature: Ubuntu 3.0-3.4-generic 3.0.0-rc5
  Uname: Linux 3.0-3-generic x86_64
  NonfreeKernelModules: wl
  Architecture: amd64
  Date: Mon Jul 11 13:12:18 2011
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Alpha amd64+mac (20101218)
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: thunderbird
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/808752/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1477838] Re: [MX4] Crackling sound after playing audio and suspended

2016-01-06 Thread Kamikaze
Also affected. I can reproduce this perhaps near 50% of the time by opening a 
terminal and running:
aplay /usr/share/sounds/alsa/Front_Left.wav
And immediately on pressing enter turning the screen off. 

You should do this somewhere reasonably quiet and you will hear the
crackle/static/hissing sound a few seconds after the sound finishes.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1477838

Title:
  [MX4] Crackling sound after playing audio and suspended

Status in Canonical System Image:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  The Meizu MX4 is doing a weird "tic tic tic..." after receive a
  notification (from telegram, mail...) and it's suspended.

  --

  When I press the screen lock button on the MX4 shortly after playing
  music or ending a phone call I hear a radio/fuzzy distorted noise
  coming from the phone. To make it stop I need to unlock and lock the
  screen again but this is not ideal.

  -

  When the screen is locked and the playing song is finished and waiting
  for a stopped signal, MX4 will do a weird lower sound.

  -

  How to reproduce (Note this does not always work, the phone needs to
  be in some specific state yet to be determined)

  Ensure MX4 is not plugged into USB
  Call the MX4 and hear the ringtone
  Dismiss the call
  Push the power button to turn off the screen
  Tick Tick Tick
  Push the power button to turn on the screen
  hissing
  Push the power button to turn off the screen
  Tick Tick Tick
  etc

  It will not clear until you play another sound
  Does not happen in silent mode of course

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1477838/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1462647] Re: Native Client (NaCl) not working in Chromium Dev

2016-01-06 Thread dnord
Also dmesg get spammed with
traps: nacl_helper[18399] general protection ip:7fd7f5992227 sp:7ffdfd86f100 
error:0 in libc-2.19.so[7fd7f5958000+1bb000]

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to chromium-browser in Ubuntu.
https://bugs.launchpad.net/bugs/1462647

Title:
  Native Client (NaCl) not working in Chromium Dev

Status in chromium-browser package in Ubuntu:
  Confirmed

Bug description:
  Native Client isn't working in Chromium Browser dev ppa. Everything
  that requires Native Client will either silently fail, or display a
  gray box with a plug icon.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: chromium-browser 45.0.2414.0-0ubuntu1~ppa1~vivid1 [origin: 
LP-PPA-saiarcot895-chromium-dev]
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CrashDB: ubuntu
  Date: Sat Jun  6 12:17:10 2015
  ExecutablePath: /usr/lib/chromium-browser/chromium-browser
  InstallationDate: Installed on 2015-05-02 (34 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  ProcEnviron: Error: [Errno 13] Permission denied: '/proc/18807/environ'
  SourcePackage: chromium-browser
  ThirdParty: True
  UpgradeStatus: No upgrade log present (probably fresh install)
  modified.conffile..etc.default.chromium.browser: [deleted]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1462647/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531686] Re: Xorg crashed with SIGABRT

2016-01-06 Thread Apport retracing service
*** This bug is a duplicate of bug 1521268 ***
https://bugs.launchpad.net/bugs/1521268

Thank you for taking the time to report this crash and helping to make
this software better.  This particular crash has already been reported
and is a duplicate of bug #1521268, so is being marked as such.  Please
look at the other bug report to see if there is any missing information
that you can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report.  Please continue to report any other bugs you may
find.

** Attachment removed: "CoreDump.gz"
   
https://bugs.launchpad.net/bugs/1531686/+attachment/4545293/+files/CoreDump.gz

** Attachment removed: "Disassembly.txt"
   
https://bugs.launchpad.net/bugs/1531686/+attachment/4545296/+files/Disassembly.txt

** Attachment removed: "ProcMaps.txt"
   
https://bugs.launchpad.net/bugs/1531686/+attachment/4545306/+files/ProcMaps.txt

** Attachment removed: "ProcStatus.txt"
   
https://bugs.launchpad.net/bugs/1531686/+attachment/4545308/+files/ProcStatus.txt

** Attachment removed: "Registers.txt"
   
https://bugs.launchpad.net/bugs/1531686/+attachment/4545309/+files/Registers.txt

** Attachment removed: "Stacktrace.txt"
   
https://bugs.launchpad.net/bugs/1531686/+attachment/4545310/+files/Stacktrace.txt

** Attachment removed: "ThreadStacktrace.txt"
   
https://bugs.launchpad.net/bugs/1531686/+attachment/4545311/+files/ThreadStacktrace.txt

** This bug has been marked a duplicate of private bug 1521268

** Information type changed from Private to Public

** Tags removed: need-amd64-retrace

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1531686

Title:
  Xorg crashed with SIGABRT

Status in xorg-server package in Ubuntu:
  New

Bug description:
  Lightdm crashes after Thunderbird new reply window tries to open.

  ProblemType: Crash
  DistroRelease: Ubuntu 15.10
  Package: xserver-xorg-core 2:1.17.2-1ubuntu9.1
  ProcVersionSignature: Ubuntu 4.2.0-22.27-generic 4.2.6
  Uname: Linux 4.2.0-22-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CrashCounter: 1
  Date: Wed Jan  6 18:01:37 2016
  DistUpgraded: 2015-11-05 09:26:17,127 DEBUG enabling apt cron job
  DistroCodename: wily
  DistroVariant: ubuntu
  DkmsStatus:
   acpi-call, 1.1.0, 4.2.0-19-generic, x86_64: installed
   acpi-call, 1.1.0, 4.2.0-22-generic, x86_64: installed
  DpkgLog:
   
  ExecutablePath: /usr/bin/Xorg
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Lenovo Device [17aa:220c]
  InstallationDate: Installed on 2014-08-30 (494 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  Lsusb:
   Bus 003 Device 002: ID 8087:8000 Intel Corp. 
   Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 20AQCTO1WW
  ProcCmdline: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 
-nolisten tcp vt7 -novtswitch
  ProcEnviron:
   
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.2.0-22-generic.efi.signed 
root=/dev/mapper/ubuntu--vg-root ro quiet splash drm.vblankoffdelay=1 
i915.lvds_downclock=1 i915.i915_enable_fbc=1 intel_pstate=enable vt.handoff=7
  Signal: 6
  SourcePackage: xorg-server
  StacktraceTop:
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
  Title: Xorg crashed with SIGABRT
  UpgradeStatus: Upgraded to wily on 2015-11-05 (62 days ago)
  UserGroups:
   
  dmi.bios.date: 05/20/2014
  dmi.bios.vendor: LENOVO
  dmi.bios.version: GJET77WW (2.27 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20AQCTO1WW
  dmi.board.vendor: LENOVO
  dmi.board.version: SDK0E50512 STD
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: Not Available
  dmi.modalias: 
dmi:bvnLENOVO:bvrGJET77WW(2.27):bd05/20/2014:svnLENOVO:pn20AQCTO1WW:pvrThinkPadT440s:rvnLENOVO:rn20AQCTO1WW:rvrSDK0E50512STD:cvnLENOVO:ct10:cvrNotAvailable:
  dmi.product.name: 20AQCTO1WW
  dmi.product.version: ThinkPad T440s
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.12.2+15.10.20151015-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2

[Desktop-packages] [Bug 1531684] Re: unity-settings-daemon crashed with SIGSEGV in malloc_consolidate()

2016-01-06 Thread Apport retracing service
*** This bug is a duplicate of bug 1300463 ***
https://bugs.launchpad.net/bugs/1300463

Thank you for taking the time to report this crash and helping to make
this software better.  This particular crash has already been reported
and is a duplicate of bug #1300463, so is being marked as such.  Please
look at the other bug report to see if there is any missing information
that you can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report.  Please continue to report any other bugs you may
find.

** Attachment removed: "CoreDump.gz"
   
https://bugs.launchpad.net/bugs/1531684/+attachment/4545275/+files/CoreDump.gz

** Attachment removed: "Disassembly.txt"
   
https://bugs.launchpad.net/bugs/1531684/+attachment/4545277/+files/Disassembly.txt

** Attachment removed: "ProcMaps.txt"
   
https://bugs.launchpad.net/bugs/1531684/+attachment/4545280/+files/ProcMaps.txt

** Attachment removed: "ProcStatus.txt"
   
https://bugs.launchpad.net/bugs/1531684/+attachment/4545281/+files/ProcStatus.txt

** Attachment removed: "Registers.txt"
   
https://bugs.launchpad.net/bugs/1531684/+attachment/4545282/+files/Registers.txt

** Attachment removed: "Stacktrace.txt"
   
https://bugs.launchpad.net/bugs/1531684/+attachment/4545283/+files/Stacktrace.txt

** Attachment removed: "ThreadStacktrace.txt"
   
https://bugs.launchpad.net/bugs/1531684/+attachment/4545284/+files/ThreadStacktrace.txt

** This bug has been marked a duplicate of bug 1300463
   unity-settings-daemon crashed with SIGSEGV in malloc_consolidate()

** Information type changed from Private to Public

** Tags removed: need-amd64-retrace

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/1531684

Title:
  unity-settings-daemon crashed with SIGSEGV in malloc_consolidate()

Status in unity-settings-daemon package in Ubuntu:
  New

Bug description:
  lightdm crashes after opening window in Thunderbird.

  ProblemType: Crash
  DistroRelease: Ubuntu 15.10
  Package: unity-settings-daemon 15.04.1+15.10.20151029-0ubuntu1
  ProcVersionSignature: Ubuntu 4.2.0-22.27-generic 4.2.6
  Uname: Linux 4.2.0-22-generic x86_64
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Jan  6 18:03:07 2016
  ExecutablePath: /usr/lib/unity-settings-daemon/unity-settings-daemon
  InstallationDate: Installed on 2014-08-30 (494 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  ProcCmdline: /usr/lib/unity-settings-daemon/unity-settings-daemon
  SegvAnalysis:
   Segfault happened at: 0x7f90f45dd1e9 :   cmp
0x18(%r11),%rbx
   PC (0x7f90f45dd1e9) ok
   source "0x18(%r11)" (0x27521d00018) not located in a known VMA region 
(needed readable region)!
   destination "%rbx" ok
  SegvReason: reading unknown VMA
  Signal: 11
  SourcePackage: unity-settings-daemon
  StacktraceTop:
   malloc_consolidate (av=av@entry=0x7f90f4922c00 ) at malloc.c:4142
   _int_malloc (av=av@entry=0x7f90f4922c00 , 
bytes=bytes@entry=4096) at malloc.c:3417
   __libc_calloc (n=, elem_size=) at malloc.c:3213
   g_malloc0 () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
  Title: unity-settings-daemon crashed with SIGSEGV in malloc_consolidate()
  UpgradeStatus: Upgraded to wily on 2015-11-05 (62 days ago)
  UserGroups: adm audio cdrom dip fuse lpadmin plugdev pulse pulse-access 
sambashare sudo video
  upstart.unity-settings-daemon.log:
   (unity-settings-daemon:3042): GLib-GIO-CRITICAL **: 
g_dbus_proxy_get_object_path: assertion 'G_IS_DBUS_PROXY (proxy)' failed
   
   (unity-settings-daemon:3042): GLib-GIO-CRITICAL **: 
g_dbus_proxy_get_object_path: assertion 'G_IS_DBUS_PROXY (proxy)' failed

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-settings-daemon/+bug/1531684/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1300463] Re: unity-settings-daemon crashed with SIGSEGV in malloc_consolidate()

2016-01-06 Thread Apport retracing service
** Tags added: wily

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/1300463

Title:
  unity-settings-daemon crashed with SIGSEGV in malloc_consolidate()

Status in unity-settings-daemon package in Ubuntu:
  Confirmed

Bug description:
  i wakeup from suspend, and password checked to desktop.

  ProblemType: Crash
  DistroRelease: Ubuntu 14.04
  Package: unity-settings-daemon 14.04.0+14.04.20140310-0ubuntu2
  ProcVersionSignature: Ubuntu 3.13.0-20.42-generic 3.13.7
  Uname: Linux 3.13.0-20-generic x86_64
  ApportVersion: 2.13.3-0ubuntu1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Tue Apr  1 06:35:21 2014
  ExecutablePath: /usr/lib/unity-settings-daemon/unity-settings-daemon
  InstallationDate: Installed on 2014-03-20 (11 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140207)
  ProcCmdline: /usr/lib/unity-settings-daemon/unity-settings-daemon
  ProcEnviron:
   PATH=(custom, no user)
   LANGUAGE=ja
   XDG_RUNTIME_DIR=
   LANG=ja_JP.UTF-8
   SHELL=/bin/bash
  SegvAnalysis:
   Segfault happened at: 0x7f63660b7733 :   cmp
0x18(%rax),%rbx
   PC (0x7f63660b7733) ok
   source "0x18(%rax)" (0x105fa500018) not located in a known VMA region 
(needed readable region)!
   destination "%rbx" ok
  SegvReason: reading unknown VMA
  Signal: 11
  SourcePackage: unity-settings-daemon
  StacktraceTop:
   malloc_consolidate (av=av@entry=0x7f63663f7760 ) at malloc.c:4157
   _int_malloc (av=av@entry=0x7f63663f7760 , 
bytes=bytes@entry=16384) at malloc.c:3423
   __libc_calloc (n=, elem_size=) at malloc.c:3219
   g_malloc0 () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
   ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
  Title: unity-settings-daemon crashed with SIGSEGV in malloc_consolidate()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-settings-daemon/+bug/1300463/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1462647] Re: Native Client (NaCl) not working in Chromium Dev

2016-01-06 Thread dnord
Still not working for me on Trusty with ppa:saiarcot895/chromium-beta.
Look like native client extension exists, but none of NaCL applications
are actually working. I tested Native Client SDK and even Hello World
did not worked.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to chromium-browser in Ubuntu.
https://bugs.launchpad.net/bugs/1462647

Title:
  Native Client (NaCl) not working in Chromium Dev

Status in chromium-browser package in Ubuntu:
  Confirmed

Bug description:
  Native Client isn't working in Chromium Browser dev ppa. Everything
  that requires Native Client will either silently fail, or display a
  gray box with a plug icon.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: chromium-browser 45.0.2414.0-0ubuntu1~ppa1~vivid1 [origin: 
LP-PPA-saiarcot895-chromium-dev]
  Uname: Linux 4.1.0-040100rc6-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: amd64
  CrashDB: ubuntu
  Date: Sat Jun  6 12:17:10 2015
  ExecutablePath: /usr/lib/chromium-browser/chromium-browser
  InstallationDate: Installed on 2015-05-02 (34 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  ProcEnviron: Error: [Errno 13] Permission denied: '/proc/18807/environ'
  SourcePackage: chromium-browser
  ThirdParty: True
  UpgradeStatus: No upgrade log present (probably fresh install)
  modified.conffile..etc.default.chromium.browser: [deleted]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1462647/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531683] [NEW] package libtidy-0.99-0 (not installed) failed to install/upgrade: trying to overwrite '/usr/lib/libtidy.so', which is also in package tidy 5.0.0

2016-01-06 Thread Alice Rose
Public bug reported:

I manually updated to HTML5 tidy yesterday the sudo apt-get update just
gave an installation error that's all

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: libtidy-0.99-0 (not installed)
ProcVersionSignature: Ubuntu 3.19.0-42.48~14.04.1-generic 3.19.8-ckt10
Uname: Linux 3.19.0-42-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.19
AptOrdering:
 libtidy-0.99-0: Install
 tidy: Install
 libtidy-0.99-0: Configure
 tidy: Configure
Architecture: amd64
Date: Wed Jan  6 20:02:12 2016
DpkgTerminalLog:
 Preparing to unpack .../libtidy-0.99-0_20091223cvs-1.2ubuntu1.1_amd64.deb ...
 Unpacking libtidy-0.99-0 (20091223cvs-1.2ubuntu1.1) ...
DuplicateSignature: package:libtidy-0.99-0:(not installed):trying to overwrite 
'/usr/lib/libtidy.so', which is also in package tidy 5.0.0
ErrorMessage: trying to overwrite '/usr/lib/libtidy.so', which is also in 
package tidy 5.0.0
InstallationDate: Installed on 2015-12-30 (8 days ago)
InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
RelatedPackageVersions:
 dpkg 1.17.5ubuntu5.5
 apt  1.0.1ubuntu2.10
SourcePackage: tidy
Title: package libtidy-0.99-0 (not installed) failed to install/upgrade: trying 
to overwrite '/usr/lib/libtidy.so', which is also in package tidy 5.0.0
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: tidy (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package need-duplicate-check package-conflict trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to tidy in Ubuntu.
https://bugs.launchpad.net/bugs/1531683

Title:
  package libtidy-0.99-0 (not installed) failed to install/upgrade:
  trying to overwrite '/usr/lib/libtidy.so', which is also in package
  tidy 5.0.0

Status in tidy package in Ubuntu:
  New

Bug description:
  I manually updated to HTML5 tidy yesterday the sudo apt-get update
  just gave an installation error that's all

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: libtidy-0.99-0 (not installed)
  ProcVersionSignature: Ubuntu 3.19.0-42.48~14.04.1-generic 3.19.8-ckt10
  Uname: Linux 3.19.0-42-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.19
  AptOrdering:
   libtidy-0.99-0: Install
   tidy: Install
   libtidy-0.99-0: Configure
   tidy: Configure
  Architecture: amd64
  Date: Wed Jan  6 20:02:12 2016
  DpkgTerminalLog:
   Preparing to unpack .../libtidy-0.99-0_20091223cvs-1.2ubuntu1.1_amd64.deb ...
   Unpacking libtidy-0.99-0 (20091223cvs-1.2ubuntu1.1) ...
  DuplicateSignature: package:libtidy-0.99-0:(not installed):trying to 
overwrite '/usr/lib/libtidy.so', which is also in package tidy 5.0.0
  ErrorMessage: trying to overwrite '/usr/lib/libtidy.so', which is also in 
package tidy 5.0.0
  InstallationDate: Installed on 2015-12-30 (8 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  RelatedPackageVersions:
   dpkg 1.17.5ubuntu5.5
   apt  1.0.1ubuntu2.10
  SourcePackage: tidy
  Title: package libtidy-0.99-0 (not installed) failed to install/upgrade: 
trying to overwrite '/usr/lib/libtidy.so', which is also in package tidy 5.0.0
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/tidy/+bug/1531683/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1365200] Re: nvidia-331 331.38-0ubuntu7.1: nvidia-331 kernel module failed to build [Makefile: No such file or directory]

2016-01-06 Thread Daniel van Vugt
** Also affects: nvidia-graphics-drivers-352 (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: nvidia-graphics-drivers-352 (Ubuntu)
   Status: New => Confirmed

** Summary changed:

- nvidia-331 331.38-0ubuntu7.1: nvidia-331 kernel module failed to build 
[Makefile: No such file or directory]
+ nvidia-* kernel module failed to build [Makefile: No such file or directory]

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu.
https://bugs.launchpad.net/bugs/1365200

Title:
  nvidia-* kernel module failed to build [Makefile: No such file or
  directory]

Status in nvidia-graphics-drivers-331 package in Ubuntu:
  Confirmed
Status in nvidia-graphics-drivers-340-updates package in Ubuntu:
  Confirmed
Status in nvidia-graphics-drivers-352 package in Ubuntu:
  Confirmed
Status in nvidia-graphics-drivers-352-updates package in Ubuntu:
  Confirmed

Bug description:
  I was updating my kernel package to 3.14.1 and this showed up.

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: nvidia-331 331.38-0ubuntu7.1
  ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9
  Uname: Linux 3.13.0-24-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  DKMSKernelVersion: 3.14.1-031401-lowlatency
  Date: Wed Sep  3 17:05:36 2014
  InstallationDate: Installed on 2014-05-31 (95 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  PackageVersion: 331.38-0ubuntu7.1
  SourcePackage: nvidia-graphics-drivers-331
  Title: nvidia-331 331.38-0ubuntu7.1: nvidia-331 kernel module failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1365200/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1377653] Re: HDMI sound output not detected / NVIDIA optimus laptop

2016-01-06 Thread Raymond
** Changed in: alsa-driver (Ubuntu)
   Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1377653

Title:
  HDMI sound output not detected / NVIDIA optimus laptop

Status in alsa-driver package in Ubuntu:
  Incomplete

Bug description:
  Hi,

  not sure if this is an alsa or nvidia/nouveau bug.
  HDMI audio output doesn't appear in sound settings output panel.
  Audio works well on internal speakers, but it seems there is no way to make 
it output to hdmi...

  The laptop has optimus NVIDIA+Intel.
  The behaviour is the same with nouveau or nvidia proprietary driver.

  Please let me know if further testing is required

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6
  Uname: Linux 3.13.0-36-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  sam2295 F pulseaudio
  CurrentDesktop: Unity
  CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order 
/var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission 
denied
  Date: Sun Oct  5 17:05:35 2014
  InstallationDate: Installed on 2014-04-21 (166 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Title: PCI/internal sound card not detected
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/02/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: N56VZ.215
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: N56VZ
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrN56VZ.215:bd11/02/2012:svnASUSTeKCOMPUTERINC.:pnN56VZ:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN56VZ:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: N56VZ
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1377653/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1377653] Re: HDMI sound output not detected / NVIDIA optimus laptop

2016-01-06 Thread Raymond
Post output of

xrandr --verbose


Did the graphic driver support audio?

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1377653

Title:
  HDMI sound output not detected / NVIDIA optimus laptop

Status in alsa-driver package in Ubuntu:
  Confirmed

Bug description:
  Hi,

  not sure if this is an alsa or nvidia/nouveau bug.
  HDMI audio output doesn't appear in sound settings output panel.
  Audio works well on internal speakers, but it seems there is no way to make 
it output to hdmi...

  The laptop has optimus NVIDIA+Intel.
  The behaviour is the same with nouveau or nvidia proprietary driver.

  Please let me know if further testing is required

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6
  Uname: Linux 3.13.0-36-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  sam2295 F pulseaudio
  CurrentDesktop: Unity
  CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order 
/var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission 
denied
  Date: Sun Oct  5 17:05:35 2014
  InstallationDate: Installed on 2014-04-21 (166 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Title: PCI/internal sound card not detected
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/02/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: N56VZ.215
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: N56VZ
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrN56VZ.215:bd11/02/2012:svnASUSTeKCOMPUTERINC.:pnN56VZ:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN56VZ:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: N56VZ
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1377653/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531654] Re: Calc almost freezes on full table operations

2016-01-06 Thread Christopher M. Penalver
dronus, thank you for reporting this and helping make Ubuntu better.

Could you please attach an example file that demonstrates the problem?

Also, as a WORKAROUND, one may see if one of the following PPAs
alleviates the issue via https://launchpad.net/~libreoffice.

** Changed in: libreoffice (Ubuntu)
   Importance: Undecided => Low

** Changed in: libreoffice (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1531654

Title:
  Calc almost freezes on full table operations

Status in libreoffice package in Ubuntu:
  Incomplete

Bug description:
  When Calc as of Ubuntu 14.04 LTS  is forced to do some calculation on
  complete columns or tables, it can take a very long time or freeze
  altogether, even if there is very little data in the table.

  For example, create a table with some number series about 1000 rows in
  some columns. Press Ctrl+A to select the whole table. Press 'Sort'.
  Calc does not respond to user interaction for a very long time now.

  If the used part of the table is selected by Shift+Ctrl+End instead,
  the sorting completes almost instantly.

  This problem may happen with many other operations too, and also
  triggers on full column selections (just click the column header) too.

  I think this is a mayor issue, as users can run into this in several
  ways (column- or full table selection, several operations) and may
  force them to force-quit Calc, loosing data.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: libreoffice-calc 1:4.2.8-0ubuntu3
  ProcVersionSignature: Ubuntu 3.19.0-42.48~14.04.1-generic 3.19.8-ckt10
  Uname: Linux 3.19.0-42-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Jan  6 23:03:40 2016
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2015-11-22 (45 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  SourcePackage: libreoffice
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1531654/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 137687] Re: "apport" automatic bug-reporting system doesn't (apparently) let you see what it reports to launchpad

2016-01-06 Thread Mathew Hodson
** Package changed: ubuntu => apport (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/137687

Title:
  "apport" automatic bug-reporting system doesn't (apparently) let you
  see what it reports to launchpad

Status in Apport:
  Invalid
Status in apport package in Ubuntu:
  Invalid

Bug description:
  Kubuntu gutsy has this nice feature that if something crashed on
  startup, logout or adept-upgrade, there will be a dialog box appearing
  (apport?) , that lets you automatically file info about the crash to
  launchpad.

  Wanting to be a "good citizen", I occasionally clicked yes on this,
  and went through with reporting the problem. However, apart from the
  subject, it doesn't let you see _what_ it reports... Most notably, the
  actual output (DpkgTerminalLog.gz etc.) is not easily visible, and so
  you've got no way of deciding whether what you are reporting is
  actually a bug, or is rather due to some local circumstances. I've
  been bitten by this on bug #137442 .

  Would it be possible to add a possibility to "view attachment" that is
  available before "Submit Bug Report"?

To manage notifications about this bug go to:
https://bugs.launchpad.net/apport/+bug/137687/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1519254] Re: undo/redo operation forget on copy of directory

2016-01-06 Thread Bug Watch Updater
** Changed in: nautilus
   Status: Fix Released => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1519254

Title:
  undo/redo operation forget on copy of directory

Status in Nautilus:
  Confirmed
Status in nautilus package in Ubuntu:
  Triaged

Bug description:
  Recently, I found the one bug releated with Undo/Redo feature of
  Nautilus on Ubuntu 15.10.

  How to reproduce the bug:
  Let's say, there are three directories called a, b, c under the same 
directory.
  Op 1. Copy a to b
  Op 2. Under the Edit menu, do "Undo Copy".
  Op 3. Copy c to b
  4. Under the Edit menu, You can see "Redo copy" for Op 1 is enabled

  Expected result:
  I think "Undo Copy" for Op 3 should be enabled under the Edit menu.
  Hope to any direction to solve this issue.

To manage notifications about this bug go to:
https://bugs.launchpad.net/nautilus/+bug/1519254/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 137687] [NEW] "apport" automatic bug-reporting system doesn't (apparently) let you see what it reports to launchpad

2016-01-06 Thread Launchpad Bug Tracker
You have been subscribed to a public bug:

Kubuntu gutsy has this nice feature that if something crashed on
startup, logout or adept-upgrade, there will be a dialog box appearing
(apport?) , that lets you automatically file info about the crash to
launchpad.

Wanting to be a "good citizen", I occasionally clicked yes on this, and
went through with reporting the problem. However, apart from the
subject, it doesn't let you see _what_ it reports... Most notably, the
actual output (DpkgTerminalLog.gz etc.) is not easily visible, and so
you've got no way of deciding whether what you are reporting is actually
a bug, or is rather due to some local circumstances. I've been bitten by
this on bug #137442 .

Would it be possible to add a possibility to "view attachment" that is
available before "Submit Bug Report"?

** Affects: apport
 Importance: Undecided
 Status: Invalid

** Affects: apport (Ubuntu)
 Importance: Undecided
 Status: Invalid

-- 
"apport" automatic bug-reporting system doesn't (apparently) let you see what 
it reports to launchpad
https://bugs.launchpad.net/bugs/137687
You received this bug notification because you are a member of Desktop 
Packages, which is subscribed to apport in Ubuntu.

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1268595] Re: Apport does not use default web browser

2016-01-06 Thread Mathew Hodson
I can't reproduce either. Feel free to reopen if anyone can provide
reproduction steps.

** Changed in: apport
   Status: Incomplete => Invalid

** Changed in: apport (Ubuntu)
   Importance: High => Medium

** Changed in: apport (Ubuntu)
   Status: Incomplete => Invalid

** Changed in: hundredpapercuts
   Status: Triaged => Invalid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to apport in Ubuntu.
https://bugs.launchpad.net/bugs/1268595

Title:
  Apport does not use default web browser

Status in Apport:
  Invalid
Status in One Hundred Papercuts:
  Invalid
Status in apport package in Ubuntu:
  Invalid

Bug description:
  Apport does not use default web browser, here i'm using Firefox as
  default (and i checked it in Firefox menu Edition --> Preferences -->
  Advanced, General tab). I save any web page in a folder, then open it
  with double click, and Firefox opens.

  Apport insists on using Google Chrome.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: apport 2.13.1-0ubuntu1
  ProcVersionSignature: Ubuntu 3.13.0-2.17-generic 3.13.0-rc7
  Uname: Linux 3.13.0-2-generic x86_64
  ApportVersion: 2.13.1-0ubuntu1
  Architecture: amd64
  CrashReports:
   600:109:116:0:2014-01-10 14:55:37.287999178 +0100:2014-01-10 
14:55:37.287999178 +0100:/var/crash/_usr_sbin_lightdm-gtk-greeter.112.uploaded
   644:0:116:0:2014-01-10 14:21:57.65419 +0100:2014-01-13 
11:09:53.956548620 +0100:/var/crash/_usr_sbin_lightdm-gtk-greeter.112.upload
   640:112:116:4872917:2014-01-10 14:22:56.587999343 +0100:2014-01-10 
14:32:39.163999342 +0100:/var/crash/_usr_sbin_lightdm-gtk-greeter.112.crash
  Date: Mon Jan 13 14:24:47 2014
  InstallationDate: Installed on 2014-01-09 (3 days ago)
  InstallationMedia: Xubuntu 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140109)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=fr_FR
   TERM=xterm
   PATH=(custom, no user)
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  SourcePackage: apport
  UpgradeStatus: No upgrade log present (probably fresh install)
  mtime.conffile..etc.apport.crashdb.conf: 2014-01-10T14:24:35.15

To manage notifications about this bug go to:
https://bugs.launchpad.net/apport/+bug/1268595/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531654] [NEW] Calc almost freezes on full table operations

2016-01-06 Thread dronus
Public bug reported:

When Calc as of Ubuntu 14.04 LTS  is forced to do some calculation on
complete columns or tables, it can take a very long time or freeze
altogether, even if there is very little data in the table.

For example, create a table with some number series about 1000 rows in
some columns. Press Ctrl+A to select the whole table. Press 'Sort'. Calc
does not respond to user interaction for a very long time now.

If the used part of the table is selected by Shift+Ctrl+End instead, the
sorting completes almost instantly.

This problem may happen with many other operations too, and also
triggers on full column selections (just click the column header) too.

I think this is a mayor issue, as users can run into this in several
ways (column- or full table selection, several operations) and may force
them to force-quit Calc, loosing data.

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: libreoffice-calc 1:4.2.8-0ubuntu3
ProcVersionSignature: Ubuntu 3.19.0-42.48~14.04.1-generic 3.19.8-ckt10
Uname: Linux 3.19.0-42-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.19
Architecture: amd64
CurrentDesktop: Unity
Date: Wed Jan  6 23:03:40 2016
EcryptfsInUse: Yes
InstallationDate: Installed on 2015-11-22 (45 days ago)
InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
SourcePackage: libreoffice
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: libreoffice (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1531654

Title:
  Calc almost freezes on full table operations

Status in libreoffice package in Ubuntu:
  New

Bug description:
  When Calc as of Ubuntu 14.04 LTS  is forced to do some calculation on
  complete columns or tables, it can take a very long time or freeze
  altogether, even if there is very little data in the table.

  For example, create a table with some number series about 1000 rows in
  some columns. Press Ctrl+A to select the whole table. Press 'Sort'.
  Calc does not respond to user interaction for a very long time now.

  If the used part of the table is selected by Shift+Ctrl+End instead,
  the sorting completes almost instantly.

  This problem may happen with many other operations too, and also
  triggers on full column selections (just click the column header) too.

  I think this is a mayor issue, as users can run into this in several
  ways (column- or full table selection, several operations) and may
  force them to force-quit Calc, loosing data.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: libreoffice-calc 1:4.2.8-0ubuntu3
  ProcVersionSignature: Ubuntu 3.19.0-42.48~14.04.1-generic 3.19.8-ckt10
  Uname: Linux 3.19.0-42-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Jan  6 23:03:40 2016
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2015-11-22 (45 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  SourcePackage: libreoffice
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1531654/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 969359] Re: [keyboard]: gnome-settings-daemon consumes 100% cpu (and blinking numlock)

2016-01-06 Thread elichai2
Same thing for me in WIly 15.10.
gnome-settings-daemon - 3.16.3-0ubuntu1

I have 12GB RAM and i7 4700MQ cpu and my laptop is stuck.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-settings-daemon in Ubuntu.
https://bugs.launchpad.net/bugs/969359

Title:
  [keyboard]: gnome-settings-daemon consumes 100% cpu (and blinking
  numlock)

Status in gnome-settings-daemon:
  Fix Released
Status in gnome-settings-daemon package in Ubuntu:
  Fix Released
Status in gnome-settings-daemon source package in Precise:
  Fix Released
Status in gnome-settings-daemon source package in Quantal:
  Fix Released
Status in gnome-settings-daemon package in Fedora:
  Unknown

Bug description:
  Impact:
  gnome-settings-daemon uses 100% cpu for ever in some cases

  Test Case:
  Seems to happen sometimes after docking or connecting with vnc, try to 
connect to the machine using a vnc client a few times and check there is no 
numlock cycle and cpu usage loop starting

  Regression potential:
  The numlock state could be wrongly set,restored on login in some cases

  -

  Original message:
  -

  I don't know how to reproduce this bug, but after varying amounts of
  normal usage of my laptop, I notice gnome-settings-daemon is consuming
  100% (approx) CPU.

  I am not sure how to restart gnome-settings-daemon, I tried opening a
  terminal and running gnome-settings-daemon again but this crashes my
  system - my external monitor switches off and my laptop locks up. I am
  able to reboot with SysRq+REISUB.

  Sorry I cannot provide more information - it happens twice now, maybe
  someone can tell me how to get more information for the next time this
  happens.

  $ lsb_release -rd
  Description:  Ubuntu precise (development branch)
  Release:  12.04

  $ apt-cache policy gnome-settings-daemon
  gnome-settings-daemon:
    Installed: 3.4.0-0ubuntu2
    Candidate: 3.4.0-0ubuntu2
    Version table:
   *** 3.4.0-0ubuntu2 0
  500 http://gb.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages
  100 /var/lib/dpkg/status

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: gnome-settings-daemon 3.4.0-0ubuntu2
  ProcVersionSignature: Ubuntu 3.2.0-20.33-generic 3.2.12
  Uname: Linux 3.2.0-20-generic x86_64
  ApportVersion: 1.95-0ubuntu1
  Architecture: amd64
  Date: Fri Mar 30 17:16:02 2012
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120301)
  ProcEnviron:
   LANGUAGE=en_GB:en
   TERM=xterm
   PATH=(custom, user)
   LANG=en_GB.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-settings-daemon
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-settings-daemon/+bug/969359/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531647] [NEW] Dependency hell: "libgl1-mesa-dri-lts-vivid : Conflicts: libgl1-mesa-dri"

2016-01-06 Thread macho
Public bug reported:

I'm not entirely sure whether it's package updates or something I did
that caused this problem, but I'm getting this:

$ sudo aptitude dist-upgrade
The following NEW packages will be installed:
  libgl1-mesa-dri{a} libllvm3.6v5{ab} libxatracker2{a} xserver-xorg{a} 
  xserver-xorg-core{a} xserver-xorg-video-all{a} xserver-xorg-video-ati{a} 
  xserver-xorg-video-cirrus{a} xserver-xorg-video-fbdev{a} 
  xserver-xorg-video-intel{a} xserver-xorg-video-mach64{a} 
  xserver-xorg-video-mga{a} xserver-xorg-video-neomagic{a} 
  xserver-xorg-video-nouveau{a} xserver-xorg-video-openchrome{a} 
  xserver-xorg-video-qxl{a} xserver-xorg-video-r128{a} 
  xserver-xorg-video-radeon{a} xserver-xorg-video-savage{a} 
  xserver-xorg-video-siliconmotion{a} xserver-xorg-video-sisusb{a} 
  xserver-xorg-video-tdfx{a} xserver-xorg-video-trident{a} 
  xserver-xorg-video-vesa{a} xserver-xorg-video-vmware{a} 
The following packages will be upgraded:
  libgbm1 xorg 
2 packages upgraded, 25 newly installed, 0 to remove and 0 not upgraded.
Need to get 16.5 MB of archives. After unpacking 139 MB will be used.
The following packages have unmet dependencies:
 libgl1-mesa-dri-lts-vivid : Conflicts: libgl1-mesa-dri but 11.0.2-1ubuntu4 is 
to be installed.
 xserver-xorg-lts-vivid : Conflicts: libgl1-mesa-dri (>= 0~) but 
11.0.2-1ubuntu4 is to be installed.
  Conflicts: libxatracker2 (>= 0~) but 11.0.2-1ubuntu4 
is to be installed.
  Conflicts: xserver-xorg but 1:7.7+7ubuntu4 is to be 
installed.
  Conflicts: xserver-xorg-core (>= 0~) but 
2:1.17.2-1ubuntu9.1 is to be installed.
  Conflicts: xserver-xorg-video-all (>= 0~) but 
1:7.7+7ubuntu4 is to be installed.
 libllvm3.6v5 : Conflicts: libllvm3.6 but 1:3.6-2ubuntu1 is installed.
 xserver-xorg-core-lts-vivid : Conflicts: xserver-xorg-core but 
2:1.17.2-1ubuntu9.1 is to be installed.
   Conflicts: xserver-xorg-video-modesetting which 
is a virtual package, provided by:
   - xserver-xorg-core, but 
2:1.17.2-1ubuntu9.1 is to be installed. 
  - xserver-xorg-core, but 2:1.17.2-1ubuntu9.1 is to be installed.
The following actions will resolve these dependencies: 


Not sure how to proceed.
Thanks!

I'm running Ubuntu 15.10.

$ ubuntu-bug mesa # gives "The problem cannot be reported: \ The report
belongs to a package that is not installed."

$ dpkg -l | grep -e mesa -e xorg
ii  libegl1-mesa-lts-vivid:amd64
10.5.9-2ubuntu1~trusty2amd64free implementation of 
the EGL API -- runtime
ii  libgl1-mesa-dri-lts-vivid:amd64 
10.5.9-2ubuntu1~trusty2amd64free implementation of 
the OpenGL API -- DRI modules
ii  libgl1-mesa-glx-lts-vivid:amd64 
10.5.9-2ubuntu1~trusty2amd64free implementation of 
the OpenGL API -- GLX runtime
ii  libglapi-mesa-lts-vivid:amd64   
10.5.9-2ubuntu1~trusty2amd64free implementation of 
the GL API -- shared library
rc  libgles1-mesa-lts-vivid:amd64   
10.5.9-2ubuntu1~trusty2amd64free implementation of 
the OpenGL|ES 1.x API -- runtime
rc  libgles2-mesa-lts-vivid:amd64   
10.5.9-2ubuntu1~trusty2amd64free implementation of 
the OpenGL|ES 2.x API -- runtime
ii  libglu1-mesa:amd64  9.0.0-2 
   amd64Mesa OpenGL utility library (GLU)
ii  libwayland-egl1-mesa-lts-vivid:amd64
10.5.9-2ubuntu1~trusty2amd64implementation of the 
Wayland EGL platform -- runtime
ii  mesa-utils  8.2.0-1ubuntu1  
   amd64Miscellaneous Mesa GL utilities
rc  mir-client-platform-mesa2:amd64 
0.12.1+15.04.20150324-0ubuntu1 amd64Display server for 
Ubuntu - client platform library for Mesa
ii  python3-xkit0.5.0ubuntu2
   all  library for the manipulation of 
xorg.conf files (Python 3)
ii  xorg
1:7.7+1ubuntu8.1   amd64X.Org X Window System
ii  xorg-docs-core  
1:1.7.1-0ubuntu1   all  Core documentation for 
the X.org X Window System
ii  xserver-xorg-core-lts-vivid 
2:1.17.1-0ubuntu3.1~trusty1amd64Xorg X server - core 
server
ii  xserver-xorg-input-evdev-lts-vivid  
1:2.9.0-1ubuntu2~trusty1 

[Desktop-packages] [Bug 1441503] Re: Xorg crashed with SIGABRT in DRI2CopyRegion()

2016-01-06 Thread Launchpad Bug Tracker
*** This bug is a duplicate of bug 1433460 ***
https://bugs.launchpad.net/bugs/1433460

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: xorg-server (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1441503

Title:
  Xorg crashed with SIGABRT in DRI2CopyRegion()

Status in xorg-server package in Ubuntu:
  Confirmed

Bug description:
  It happened when I started Chromium.

  ProblemType: Crash
  DistroRelease: Ubuntu 15.04
  Package: xserver-xorg-core 2:1.17.1-0ubuntu3
  ProcVersionSignature: Ubuntu 3.19.0-12.12-generic 3.19.3
  Uname: Linux 3.19.0-12-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.17-0ubuntu1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CrashCounter: 1
  Date: Wed Apr  8 18:44:17 2015
  DistUpgraded: 2015-04-03 11:00:14,482 DEBUG enabling apt cron job
  DistroCodename: vivid
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.3.26, 3.16.0-33-generic, x86_64: installed
   virtualbox, 4.3.26, 3.19.0-11-generic, x86_64: installed
   virtualbox, 4.3.26, 3.19.0-12-generic, x86_64: installed
  ExecutablePath: /usr/bin/Xorg
  ExtraDebuggingInterest: Yes, if not too technical
  GraphicsCard:
   Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] 
(rev 09) (prog-if 00 [VGA controller])
 Subsystem: Samsung Electronics Co Ltd Device [144d:c0d7]
  InstallationDate: Installed on 2013-04-27 (711 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C
  ProcCmdline: /usr/bin/X -core :1 -seat seat0 -auth /var/run/lightdm/root/:1 
-mir x-1 -mirSocket /run/mir_socket -nolisten tcp
  ProcEnviron:
   
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-12-generic 
root=UUID=7ca4099c-8063-4ecb-bbf0-16f0ef0d29e1 ro quiet splash 
i915.lvds_downclock=1 drm.vblankoffdelay=1 vt.handoff=7
  Signal: 6
  SourcePackage: xorg-server
  StacktraceTop:
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
   ?? ()
   DRI2CopyRegion ()
   ?? ()
  Title: Xorg crashed with SIGABRT in DRI2CopyRegion()
  UpgradeStatus: Upgraded to vivid on 2015-04-03 (5 days ago)
  UserGroups:
   
  dmi.bios.date: 08/03/2012
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: P05AAJ
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: SAMSUNG_NP1234567890
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvrP05AAJ:bd08/03/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn530U3C/530U4C:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1:
  dmi.product.name: 530U3C/530U4C
  dmi.product.version: 0.1
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.
  version.compiz: compiz 1:0.9.12.1+15.04.20150330-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.59-0ubuntu1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917-1~exp1ubuntu2build1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2build1
  xserver.bootTime: Wed Apr  8 18:44:34 2015
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs: OutputDP-0  
HDMI-0   VGA-0
  xserver.version: 2:1.17.1-0ubuntu3
  xserver.video_driver: intel

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1441503/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531316] Re: Totem in full screen crashes Xorg

2016-01-06 Thread forteller
Output of lshw says:

 *-display
 description: VGA compatible controller
 product: Haswell-ULT Integrated Graphics Controller
 vendor: Intel Corporation
 physical id: 2
 bus info: pci@:00:02.0
 version: 09
 width: 64 bits
 clock: 33MHz
 capabilities: msi pm vga_controller bus_master cap_list rom
 configuration: driver=i915 latency=0
 resources: irq:44 memory:f780-f7bf 
memory:e000-efff ioport:f000(size=64)

Not sure how to do the log and backtrace thing. I'd appreciate it if you
could walk me trough it or point me in the right direction to find out.
Thanks!

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1531316

Title:
  Totem in full screen crashes Xorg

Status in xorg package in Ubuntu:
  New

Bug description:
  I tried reporting this to Totem[1], but they assured me this is an
  issue with X.

  I've tried playing both mkv and avi files in Totem in a almost totally
  newly installed Ubuntu Gnome 15.10 64 bit, updated to Gnome 3.18 with
  the Gnome Staging PPA.

  Every time I play the files in full screen mode the screen turns black
  and I'm logged out of my session. When I log back in I see that all
  programs are closed.

  This happens at different times after going to full screen mode. Some
  times after a second, other times after a few minutes.

  It only happens in full screen, I can play the video for as long as I
  want if I don't go full screen. It also only happens in Totem, I don't
  experience it in full screen in VLC.

  I don't know how to find the log files from the crash, but please let
  me know how to do that if it can help.

  This is quite critical for the adaptation of (Ubuntu) Gnome. Non
  technical people will soon give up Linux if their first meeting with
  it is that they can't play videos in full screen mode (they won't
  think of the possibility of installing some other video player). So I
  hope you will look into this closely even though it's a bit vague. If
  there's anything I can do to help, please let me know!

  Thanks!

  [1] https://bugzilla.gnome.org/show_bug.cgi?id=760078

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531316/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1332875]

2016-01-06 Thread Miguelangelrv
*** Bug 96904 has been marked as a duplicate of this bug. ***

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1332875

Title:
  [UPSTREAM] Writer: unable to select multiple pictures with SHIFT

Status in LibreOffice:
  Confirmed
Status in libreoffice package in Ubuntu:
  Confirmed

Bug description:
  I am unable to select multiple pictures with SHIFT. It used to work
  normally aprx. a year-two ago, what've happened? This is VERY
  unpleasant bug!

  You may reproduce it easily:
  1) create a new document
  2) insert two PNG images via Insert -> Image
  3) try to select them both with SHIFT

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: libreoffice-core 1:4.2.3~rc3-0ubuntu2
  ProcVersionSignature: Ubuntu 3.13.0-29.53-generic 3.13.11.2
  Uname: Linux 3.13.0-29-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.2
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Sat Jun 21 22:17:58 2014
  ExecutablePath: /usr/lib/libreoffice/program/soffice.bin
  InstallationDate: Installed on 2013-10-26 (238 days ago)
  InstallationMedia: Xubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016)
  SourcePackage: libreoffice
  UpgradeStatus: Upgraded to trusty on 2014-06-11 (10 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/df-libreoffice/+bug/1332875/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 49579] Re: screen doesn't lock when some menu is open

2016-01-06 Thread Robert Hönig
So under xenial, I can't reproduce the bug, it seems to be fixed.

** Changed in: gnome-screensaver (Ubuntu Xenial)
   Status: Triaged => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-screensaver in Ubuntu.
https://bugs.launchpad.net/bugs/49579

Title:
  screen doesn't lock when some menu is open

Status in GNOME Screensaver:
  Expired
Status in OEM Priority Project:
  Won't Fix
Status in OEM Priority Project precise series:
  Won't Fix
Status in Unity:
  Triaged
Status in Unity 7.2 series:
  Triaged
Status in X.Org X server:
  Confirmed
Status in gnome-screensaver package in Ubuntu:
  Fix Released
Status in unity package in Ubuntu:
  Triaged
Status in gnome-screensaver source package in Precise:
  Triaged
Status in unity source package in Precise:
  Triaged
Status in gnome-screensaver source package in Xenial:
  Fix Released
Status in unity source package in Xenial:
  Triaged
Status in xorg-server package in Debian:
  Confirmed

Bug description:
  Binary package hint: gnome-screensaver

  I'm running a fresh install of Dapper with screensaver set to 'blank
  screen', and 'lock screen when screensaver is active' enabled.

  If a panel menu (e.g. Applications) is open and the machine is left
  idle, the screen fails to lock. It fades out after the time period as
  expected, but the desktop reappears after a few seconds.

  Ben (comments / criticism welcome, this is my first bug report)

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-screensaver/+bug/49579/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531592] [NEW] low grafics

2016-01-06 Thread Josue Jauregui
Public bug reported:

it's to slow at run the laptop

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: xorg 1:7.7+1ubuntu8.1
Uname: Linux 4.3.0-040300-generic x86_64
.tmp.unity.support.test.1:
 
ApportVersion: 2.14.1-0ubuntu3.19
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
Date: Wed Jan  6 13:30:10 2016
DistUpgraded: Fresh install
DistroCodename: trusty
DistroVariant: ubuntu
DkmsStatus:
 bcmwl, 6.30.223.248+bdcom, 3.13.0-74-generic, x86_64: installed
 bcmwl, 6.30.223.248+bdcom, 3.19.0-43-generic, x86_64: installed
 fglrx-core, 15.200: added
ExtraDebuggingInterest: I just need to know a workaround
GraphicsCard:
 Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6620G] 
[1002:9641] (prog-if 00 [VGA controller])
   Subsystem: Samsung Electronics Co Ltd Device [144d:c608]
InstallationDate: Installed on 2015-01-03 (368 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2)
MachineType: SAMSUNG ELECTRONICS CO., LTD. 305V4A/305V5A/3415VA
ProcEnviron:
 LANGUAGE=es_MX:es
 TERM=xterm
 PATH=(custom, no user)
 LANG=es_MX.UTF-8
 SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.3.0-040300-generic 
root=UUID=29348bdd-813e-4c29-9d8b-eb1ba9cc3c3b ro recovery nomodeset
Renderer: Software
SourcePackage: xorg
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 11/01/2012
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 06QN.MI13.20121101.SKK
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: 305V4A/305V4A
dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
dmi.board.version: 06QN
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 9
dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
dmi.chassis.version: N/A
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr06QN.MI13.20121101.SKK:bd11/01/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn305V4A/305V5A/3415VA:pvr06QN:rvnSAMSUNGELECTRONICSCO.,LTD.:rn305V4A/305V4A:rvr06QN:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A:
dmi.product.name: 305V4A/305V5A/3415VA
dmi.product.version: 06QN
dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.
version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.65+git20151026.c745e541-0ubuntu0ricotz~trusty
version.libgl1-mesa-dri: libgl1-mesa-dri 
11.0.4~git20151026+11.0.ec14e6f8-0ubuntu0ricotz~trusty
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 
11.0.4~git20151026+11.0.ec14e6f8-0ubuntu0ricotz~trusty
version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:7.4.99+git20140806.fbf575cb-0ubuntu0sarvatt~trusty
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20151202.da9ad388-0ubuntu0sarvatt~trusty
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11+git20141030.3fb97d78-0ubuntu0sarvatt~trusty2
xserver.bootTime: Wed Jan  6 13:23:08 2016
xserver.configfile: default
xserver.logfile: /var/log/Xorg.0.log
xserver.version: 2:1.15.1-0ubuntu2.7

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 third-party-packages trusty ubuntu

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1531592

Title:
  low grafics

Status in xorg package in Ubuntu:
  New

Bug description:
  it's to slow at run the laptop

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xorg 1:7.7+1ubuntu8.1
  Uname: Linux 4.3.0-040300-generic x86_64
  .tmp.unity.support.test.1:
   
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Wed Jan  6 13:30:10 2016
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  DkmsStatus:
   bcmwl, 6.30.223.248+bdcom, 3.13.0-74-generic, x86_64: installed
   bcmwl, 6.30.223.248+bdcom, 3.19.0-43-generic, x86_64: installed
   fglrx-core, 15.200: added
  ExtraDebuggingInterest: I just need to know a workaround
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6620G] 
[1002:9641] (prog-if 00 [VGA controller])
 Subsystem: Samsung Electronics Co Ltd Device [144d:c608]
  InstallationDate: Installed on 2015-01-03 (368 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 305V4A/305V5A/3415VA
  ProcEnviron:
   LANGUAGE=es_MX:es
   TERM=xterm
   PATH=(custom,

[Desktop-packages] [Bug 1456326] Re: XServer eats up 100% cpu and is very slow on specific tasks with xfce desktop

2016-01-06 Thread Alexander Zubkov
I have same behaviour on notebook with AMD A4-5000 APU with embedded [AMD/ATI] 
Kabini [Radeon HD 8330].
When I press "Log Out ..." button or make screenshot - Xorg starts eating 100% 
of one CPU core for long time.
Ctrl-Alt-F1, Ctrl-Alt-F7 pop ups logout selector window immediately. Changing 
driver to proprietary fglrx is helped too.
I have tried to install 4.2 kernel with "apt-get install 
linux-generic-lts-wily", but it does not helped.
$ uname -a
Linux hp17 4.2.0-23-generic #28~14.04.1-Ubuntu SMP Thu Dec 31 13:40:42 UTC 2015 
x86_64 x86_64 x86_64 GNU/Linux

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1456326

Title:
  XServer eats up 100% cpu and is very slow on specific tasks with xfce
  desktop

Status in xorg-server package in Ubuntu:
  Confirmed

Bug description:
  I am using xfce desktop.

  Issue:

  When I want to log out, after clicking on the log-out button from the
  start menu (that one which looks like the power button on a tv-
  remote), nothing happens for several seconds before the window to
  confirm the logout/lock screen/shutdown appears and the X process is
  eating up 100% CPU during that time.

  The same issue I have experienced when I took the screenshot: After
  pressing the key combination to take a screenshot, I had to wait
  several seconds before the screenshot has been presented. During the
  waiting period, 100% CPU was used.

  Even some other things seem to react somehow sluggishly while others are 
working as expected.
  But when logging out, it is always annoying to wait so long for the window to 
choose to log out/lock the screen/shutdown. 

  Expected behaviour:
  * The logout window is displayed immediately (as before).
  * The Screenshot is displayed immediately after taking it.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xserver-xorg-core 2:1.15.1-0ubuntu2.7
  ProcVersionSignature: Ubuntu 3.13.0-52.86-generic 3.13.11-ckt18
  Uname: Linux 3.13.0-52-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.10
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  Date: Mon May 18 22:09:46 2015
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  ExecutablePath: /usr/bin/Xorg
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8280] [1002:9836] 
(prog-if 00 [VGA controller])
 Subsystem: ASRock Incorporation Device [1849:9836]
  InstallationDate: Installed on 2014-02-25 (446 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
  ProcEnviron:
   
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-52-generic 
root=UUID=5e706392-b33a-488d-bd51-fc1d86c7ed43 ro quiet splash vt.handoff=7
  SourcePackage: xorg-server
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/21/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P1.10
  dmi.board.name: AM1B-ITX
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP1.10:bd02/21/2014:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnAM1B-ITX:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To Be Filled By O.E.M.
  dmi.product.version: To Be Filled By O.E.M.
  dmi.sys.vendor: To Be Filled By O.E.M.
  version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.4
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.4
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.6
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Mon May 18 21:30:52 2015
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputLite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint 
KEYBOARD, id 8
   inputLite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint 
KEYBOARD, id 9
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs: Output  HDMI-0 

[Desktop-packages] [Bug 1456326] Re: XServer eats up 100% cpu and is very slow on specific tasks with xfce desktop

2016-01-06 Thread Alexander Zubkov
I have also found similar problem during googling here:
http://ubuntuforums.org/showthread.php?t=2232737

** Changed in: xorg-server (Ubuntu)
   Status: Expired => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1456326

Title:
  XServer eats up 100% cpu and is very slow on specific tasks with xfce
  desktop

Status in xorg-server package in Ubuntu:
  Confirmed

Bug description:
  I am using xfce desktop.

  Issue:

  When I want to log out, after clicking on the log-out button from the
  start menu (that one which looks like the power button on a tv-
  remote), nothing happens for several seconds before the window to
  confirm the logout/lock screen/shutdown appears and the X process is
  eating up 100% CPU during that time.

  The same issue I have experienced when I took the screenshot: After
  pressing the key combination to take a screenshot, I had to wait
  several seconds before the screenshot has been presented. During the
  waiting period, 100% CPU was used.

  Even some other things seem to react somehow sluggishly while others are 
working as expected.
  But when logging out, it is always annoying to wait so long for the window to 
choose to log out/lock the screen/shutdown. 

  Expected behaviour:
  * The logout window is displayed immediately (as before).
  * The Screenshot is displayed immediately after taking it.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: xserver-xorg-core 2:1.15.1-0ubuntu2.7
  ProcVersionSignature: Ubuntu 3.13.0-52.86-generic 3.13.11-ckt18
  Uname: Linux 3.13.0-52-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.14.1-0ubuntu3.10
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: None
  Date: Mon May 18 22:09:46 2015
  DistUpgraded: Fresh install
  DistroCodename: trusty
  DistroVariant: ubuntu
  ExecutablePath: /usr/bin/Xorg
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8280] [1002:9836] 
(prog-if 00 [VGA controller])
 Subsystem: ASRock Incorporation Device [1849:9836]
  InstallationDate: Installed on 2014-02-25 (446 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M.
  ProcEnviron:
   
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-52-generic 
root=UUID=5e706392-b33a-488d-bd51-fc1d86c7ed43 ro quiet splash vt.handoff=7
  SourcePackage: xorg-server
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/21/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: P1.10
  dmi.board.name: AM1B-ITX
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrP1.10:bd02/21/2014:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnAM1B-ITX:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To Be Filled By O.E.M.
  dmi.product.version: To Be Filled By O.E.M.
  dmi.sys.vendor: To Be Filled By O.E.M.
  version.compiz: compiz 1:0.9.11.3+14.04.20150313-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2~ubuntu14.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.1.3-0ubuntu0.4
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.1.3-0ubuntu0.4
  version.xserver-xorg-core: xserver-xorg-core 2:1.15.1-0ubuntu2.7
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.8.2-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.3.0-1ubuntu3.1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.910-0ubuntu1.6
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.10-1ubuntu2
  xserver.bootTime: Mon May 18 21:30:52 2015
  xserver.configfile: default
  xserver.devices:
   inputPower Button KEYBOARD, id 6
   inputPower Button KEYBOARD, id 7
   inputLite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint 
KEYBOARD, id 8
   inputLite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint 
KEYBOARD, id 9
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs: Output  HDMI-0  
HDMI-1   VGA-0
  xserver.version: 2:1.15.1-0ubuntu2.7
  xserver.video_driver: radeon

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1456326/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
Mo

[Desktop-packages] [Bug 1351227] Re: libwebp ftbfs on arm64

2016-01-06 Thread Steve Langasek
This is a bug specific to the C language, which is not applicable to the
in-progress gccgo-4.9 SRU. Marking as resolved.

** Tags removed: verification-needed
** Tags added: verification-done

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libwebp in Ubuntu.
https://bugs.launchpad.net/bugs/1351227

Title:
  libwebp ftbfs on arm64

Status in gcc:
  Invalid
Status in gcc-4.9 package in Ubuntu:
  Fix Released
Status in libwebp package in Ubuntu:
  Confirmed

Bug description:
  ICE

To manage notifications about this bug go to:
https://bugs.launchpad.net/gcc/+bug/1351227/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1530558] Re: Xorg crash when using VLC and google chrome

2016-01-06 Thread Robert Hönig
This bug does not happen anymore in xenial, having lxde installed

** Changed in: xorg-server (Ubuntu)
   Status: Confirmed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1530558

Title:
  Xorg crash when using VLC and google chrome

Status in xorg-server package in Ubuntu:
  Fix Released

Bug description:
  Ubuntu 15.10, Lubuntu flavor, running LXDE.

  To reproduce
  1. Start Google Chrome (latest official version, google-chrome-stable 
 47.0.2526.106-1 ), can contain just a single empty tab
  2. Start VLC (regular distribution version, 2.2.1-3, video output set to 
automatic and other settings are defaults) and load a video.
  3. Move cursor over the video position slider.
  4. Xorg crash
4336.541] (EE) Backtrace:
  [  4336.541] (EE) 0: /usr/bin/X (xorg_backtrace+0x4e) [0x55de7a03d68e]
  [  4336.541] (EE) 1: /usr/bin/X (0x55de79e89000+0x1b89f9) [0x55de7a0419f9]
  [  4336.541] (EE) 2: /lib/x86_64-linux-gnu/libc.so.6 (0x7f61909ca000+0x352f0) 
[0x7f61909ff2f0]
  [  4336.541] (EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so 
(0x7f618cda1000+0x24f18) [0x7f618cdc5f18]
  [  4336.541] (EE) 4: /usr/lib/xorg/modules/drivers/intel_drv.so 
(0x7f618cda1000+0x26157) [0x7f618cdc7157]
  [  4336.541] (EE) 5: /usr/lib/xorg/modules/drivers/intel_drv.so 
(0x7f618cda1000+0x2e161) [0x7f618cdcf161]
  [  4336.541] (EE) 6: /usr/lib/xorg/modules/drivers/intel_drv.so 
(0x7f618cda1000+0x80335) [0x7f618ce21335]
  [  4336.541] (EE) 7: /usr/lib/xorg/modules/drivers/intel_drv.so 
(0x7f618cda1000+0x80e2c) [0x7f618ce21e2c]
  [  4336.541] (EE) 8: /usr/lib/xorg/modules/drivers/intel_drv.so 
(0x7f618cda1000+0x82e1a) [0x7f618ce23e1a]
  [  4336.541] (EE) 9: /usr/lib/xorg/modules/drivers/intel_drv.so 
(0x7f618cda1000+0x58337) [0x7f618cdf9337]
  [  4336.541] (EE) 10: /usr/lib/xorg/modules/drivers/intel_drv.so 
(0x7f618cda1000+0x3979f) [0x7f618cdda79f]
  [  4336.541] (EE) 11: /usr/lib/xorg/modules/drivers/intel_drv.so 
(0x7f618cda1000+0x399a2) [0x7f618cdda9a2]
  [  4336.541] (EE) 12: /usr/bin/X (0x55de79e89000+0x13f981) [0x55de79fc8981]
  [  4336.541] (EE) 13: /usr/bin/X (0x55de79e89000+0xf492c) [0x55de79f7d92c]
  [  4336.541] (EE) 14: /usr/bin/X (0x55de79e89000+0xf5f35) [0x55de79f7ef35]
  [  4336.541] (EE) 15: /usr/bin/X (0x55de79e89000+0x5818f) [0x55de79ee118f]
  [  4336.541] (EE) 16: /usr/bin/X (0x55de79e89000+0x5c34b) [0x55de79ee534b]
  [  4336.541] (EE) 17: /lib/x86_64-linux-gnu/libc.so.6 
(__libc_start_main+0xf0) [0x7f61909eaa40]
  [  4336.541] (EE) 18: /usr/bin/X (_start+0x29) [0x55de79ecf6c9]
  [  4336.541] (EE) 
  [  4336.541] (EE) Segmentation fault at address 0x0

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: xserver-xorg-core 2:1.17.2-1ubuntu9.1
  ProcVersionSignature: Ubuntu 4.2.0-22.27-generic 4.2.6
  Uname: Linux 4.2.0-22-generic x86_64
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CurrentDesktop: LXDE
  Date: Sat Jan  2 17:22:17 2016
  InstallationDate: Installed on 2015-03-19 (288 days ago)
  InstallationMedia: Lubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
  SourcePackage: xorg-server
  UpgradeStatus: Upgraded to wily on 2015-12-11 (22 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1530558/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1477838] Re: [MX4] Crackling sound after playing audio and suspended

2016-01-06 Thread Pat McGowan
** Description changed:

  The Meizu MX4 is doing a weird "tic tic tic..." after receive a
  notification (from telegram, mail...) and it's suspended.
  
  --
  
  When I press the screen lock button on the MX4 shortly after playing
  music or ending a phone call I hear a radio/fuzzy distorted noise coming
  from the phone. To make it stop I need to unlock and lock the screen
  again but this is not ideal.
  
  -
  
  When the screen is locked and the playing song is finished and waiting
  for a stopped signal, MX4 will do a weird lower sound.
  
- How to reproduce
+ -
+ 
+ How to reproduce (Note this does not always work, the phone needs to be
+ in some specific state yet to be determined)
  
  Ensure MX4 is not plugged into USB
  Call the MX4 and hear the ringtone
  Dismiss the call
  Push the power button to turn off the screen
  Tick Tick Tick
  Push the power button to turn on the screen
  hissing
  Push the power button to turn off the screen
  Tick Tick Tick
  etc
  
  It will not clear until you play another sound
  Does not happen in silent mode of course

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1477838

Title:
  [MX4] Crackling sound after playing audio and suspended

Status in Canonical System Image:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  The Meizu MX4 is doing a weird "tic tic tic..." after receive a
  notification (from telegram, mail...) and it's suspended.

  --

  When I press the screen lock button on the MX4 shortly after playing
  music or ending a phone call I hear a radio/fuzzy distorted noise
  coming from the phone. To make it stop I need to unlock and lock the
  screen again but this is not ideal.

  -

  When the screen is locked and the playing song is finished and waiting
  for a stopped signal, MX4 will do a weird lower sound.

  -

  How to reproduce (Note this does not always work, the phone needs to
  be in some specific state yet to be determined)

  Ensure MX4 is not plugged into USB
  Call the MX4 and hear the ringtone
  Dismiss the call
  Push the power button to turn off the screen
  Tick Tick Tick
  Push the power button to turn on the screen
  hissing
  Push the power button to turn off the screen
  Tick Tick Tick
  etc

  It will not clear until you play another sound
  Does not happen in silent mode of course

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1477838/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531292] Re: startup applications overwrites entries

2016-01-06 Thread Duckshavings
Ok, here you go:

https://bugzilla.gnome.org/show_bug.cgi?id=760233


** Bug watch added: GNOME Bug Tracker #760233
   https://bugzilla.gnome.org/show_bug.cgi?id=760233

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-session in Ubuntu.
https://bugs.launchpad.net/bugs/1531292

Title:
  startup applications overwrites entries

Status in gnome-session package in Ubuntu:
  New

Bug description:
  When using the startup applications GUI, scripts with the same file name but 
different paths will overwrite each other. For instance, if I added an entry as:
  Name: program1
  Command: /home/user/scripts/program1/run
  Comment: program 1

  I can exit the startup applications window and everything saves fine.

  But if I later reopen and add an entry:
  Name: program2
  Command: /home/user/scripts/program2/run
  Comment: program 2

  both records will display on the main menu, but after closing and
  reopening the window, only program2 will be listed. The record for
  program2 overwrites the record for program1 when the startup
  applications window closes, but it looks like it works fine before you
  close it. If I named my script for program2, 'run2', as in:
  '/home/user/scripts/program2/run2', both records will be kept.

  
  Additional info:--
  apt-cache policy gnome-session-bin
  gnome-session-bin:
Installed: 3.9.90-0ubuntu12.1
Candidate: 3.9.90-0ubuntu12.1
Version table:
   *** 3.9.90-0ubuntu12.1 0
  500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   3.9.90-0ubuntu12 0
  500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages

  
  lsb_release -rd
  Description:  Ubuntu 14.04.3 LTS
  Release:  14.04

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: gnome-session-bin 3.9.90-0ubuntu12.1
  ProcVersionSignature: Ubuntu 3.16.0-55.74~14.04.1-generic 3.16.7-ckt19
  Uname: Linux 3.16.0-55-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Tue Jan  5 16:13:00 2016
  InstallationDate: Installed on 2015-12-07 (29 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 
(20150218.1)
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-session
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-session/+bug/1531292/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531579] [NEW] package texlive-binaries 2013.20130729.30972-2build3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- try

2016-01-06 Thread Katherine Hajer
Public bug reported:

tex-common did not update correctly when I upgraded from 12.04 LTS to
14.04 LTS. Every time I update packages, I get the same error.

I have reported this before, and supposedly a fix was made, but no steps
to implement the fix were provided in the bug report.

I found the following steps on askubuntu.com and tried them:

sudo apt-get remove tex-common
sudo apt-get install tex-common
sudo apt-get install texlive-*

Steps 1 and 2 worked. Step 3 caused the errors. The errors repeated
until the apt-get aborted. I couldn't save all of the warnings and
errors, but here's the last part:

Warning: found file: /etc/texmf/updmap.d/10texlive-math-extra.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-omega.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-pictures.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-science.cfg
Warning: found file: /etc/texmf/updmap.d/20latex-fonts-thai-tlwg.cfg
Warning: found file: /etc/texmf/updmap.d/20tex-gyre.cfg
Warning: found file: /etc/texmf/updmap.d/50cm-super-minimal.cfg
Warning: found file: /etc/texmf/updmap.d/50cm-super.cfg

Setting up latex-cjk-chinese-arphic-gbsn00lp (1.23) ...


Warning: Old configuration style found in /etc/texmf/updmap.d
Warning: For now these files have been included, 
Warning: but expect inconsistencies.
Warning: These packages should be rebuild with tex-common.
Warning: Please see /usr/share/doc/tex-common/NEWS.Debian.gz
Warning: found file: /etc/texmf/updmap.d/00updmap.cfg
Warning: found file: /etc/texmf/updmap.d/10lmodern.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-base.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-fonts-extra.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-fonts-recommended.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-games.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-african.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-arabic.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-cyrillic.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-czechslovak.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-french.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-greek.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-hebrew.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-indic.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-lithuanian.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-mongolian.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-polish.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-vietnamese.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-latex-base.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-latex-extra.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-math-extra.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-omega.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-pictures.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-science.cfg
Warning: found file: /etc/texmf/updmap.d/20latex-fonts-thai-tlwg.cfg
Warning: found file: /etc/texmf/updmap.d/20tex-gyre.cfg
Warning: found file: /etc/texmf/updmap.d/50cm-super-minimal.cfg
Warning: found file: /etc/texmf/updmap.d/50cm-super.cfg

Setting up latex-cjk-chinese-arphic-gkai00mp (1.23) ...


Warning: Old configuration style found in /etc/texmf/updmap.d
Warning: For now these files have been included, 
Warning: but expect inconsistencies.
Warning: These packages should be rebuild with tex-common.
Warning: Please see /usr/share/doc/tex-common/NEWS.Debian.gz
Warning: found file: /etc/texmf/updmap.d/00updmap.cfg
Warning: found file: /etc/texmf/updmap.d/10lmodern.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-base.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-fonts-extra.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-fonts-recommended.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-games.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-african.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-arabic.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-cyrillic.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-czechslovak.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-french.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-greek.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-hebrew.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-indic.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-lithuanian.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-mongolian.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-polish.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-lang-vietnamese.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-latex-base.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-latex-extra.cfg
Warning: found file: /etc/texmf/updmap.d/10texlive-math-extra.cfg
Warning: found file:

[Desktop-packages] [Bug 85332] Re: places menu doesn't close on desktop right click

2016-01-06 Thread Robert Hönig
This bug does not apply anymore to Ubuntu 15.10 or Ubuntu 16.04. After
right-clicking on the desktop, nothing happens except the Places-Menu to
disappear.

** Changed in: gnome-panel (Ubuntu)
   Status: Triaged => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-panel in Ubuntu.
https://bugs.launchpad.net/bugs/85332

Title:
  places menu doesn't close on desktop right click

Status in GNOME Panel:
  Confirmed
Status in gnome-panel package in Ubuntu:
  Fix Released

Bug description:
  Issue: Gnome's "Places" menu stays visible after right-clicking on the
  desktop.

  Steps to reproduce:

  1. Click on the Places menu;
  2. Right-click somewhere on the desktop;

  The context menu of the "Menu Bar" appears, instead of the Places menu
  disappearance. After that, the Places menu stays visible until the
  mouse gets over Applications or System.

  This bug was reproduced on two Edgy machines and one Dapper machine.

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-panel/+bug/85332/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 29894] Re: can't take screenshot when menu on panel is opened

2016-01-06 Thread Robert Hönig
This bug was fixed with the fix of bug #10905. Also, it is not possible
to reproduce it given the instructions: Taking a screenshot with the
PrtSc-Key works now even with gnome-panel opened.

** Changed in: gnome-panel (Ubuntu)
   Status: Triaged => Fix Released

** Changed in: gnome-screenshot (Ubuntu)
   Status: Confirmed => Fix Released

** Changed in: unity (Ubuntu)
   Status: Triaged => Fix Released

** Changed in: gnome-shell (Ubuntu)
   Status: Confirmed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-screenshot in Ubuntu.
https://bugs.launchpad.net/bugs/29894

Title:
  can't take screenshot when menu on panel is opened

Status in GNOME Panel:
  In Progress
Status in Unity:
  Triaged
Status in gnome-panel package in Ubuntu:
  Fix Released
Status in gnome-screenshot package in Ubuntu:
  Fix Released
Status in gnome-shell package in Ubuntu:
  Fix Released
Status in unity package in Ubuntu:
  Fix Released

Bug description:
  I can always press the "Print screen" key to take a screenshot of my
  desktop. When i click on say, the System menu in the gnome-panel, it
  just doesn't work anymore.

  Note: this is in fact only a symptom of bug 10905 that states that no
  hotkeys/shortcuts whatsoever can be triggered when a menu is open.
  there seems to be a dispute if that is a bug or an intended design
  decision. thus bug 10905 and its duplicates always get closed. people
  seem to agree that not being able to take screenshots is not intended
  bahavior and considered a bug. thus this report is allowed to stay
  open :)

  a known workaround for taking screenshots of menus is to directly launch the 
screengrabber with a delay like so:
  gnome-screenshot --delay=5

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-panel/+bug/29894/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1477838] Re: [MX4] Crackling sound after playing audio and suspended

2016-01-06 Thread Pat McGowan
could be related to bug #1518122

** Description changed:

  The Meizu MX4 is doing a weird "tic tic tic..." after receive a
  notification (from telegram, mail...) and it's suspended.
  
  --
  
  When I press the screen lock button on the MX4 shortly after playing
  music or ending a phone call I hear a radio/fuzzy distorted noise coming
  from the phone. To make it stop I need to unlock and lock the screen
  again but this is not ideal.
  
  -
  
  When the screen is locked and the playing song is finished and waiting
  for a stopped signal, MX4 will do a weird lower sound.
+ 
+ How to reproduce
+ 
+ Call the MX4 and hear the ringtone
+ Dismiss the call
+ Push the power button to turn off the screen
+ Tick Tick Tick
+ Push the power button to turn on the screen
+ hissing
+ Push the power button to turn off the screen
+ Tick Tick Tick
+ etc
+ 
+ It will not clear until you play another sound
+ Does not happen in silent mode of course

** Description changed:

  The Meizu MX4 is doing a weird "tic tic tic..." after receive a
  notification (from telegram, mail...) and it's suspended.
  
  --
  
  When I press the screen lock button on the MX4 shortly after playing
  music or ending a phone call I hear a radio/fuzzy distorted noise coming
  from the phone. To make it stop I need to unlock and lock the screen
  again but this is not ideal.
  
  -
  
  When the screen is locked and the playing song is finished and waiting
  for a stopped signal, MX4 will do a weird lower sound.
  
  How to reproduce
  
+ Ensure MX4 is not plugged into USB
  Call the MX4 and hear the ringtone
  Dismiss the call
  Push the power button to turn off the screen
  Tick Tick Tick
  Push the power button to turn on the screen
  hissing
  Push the power button to turn off the screen
  Tick Tick Tick
  etc
  
  It will not clear until you play another sound
  Does not happen in silent mode of course

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1477838

Title:
  [MX4] Crackling sound after playing audio and suspended

Status in Canonical System Image:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  The Meizu MX4 is doing a weird "tic tic tic..." after receive a
  notification (from telegram, mail...) and it's suspended.

  --

  When I press the screen lock button on the MX4 shortly after playing
  music or ending a phone call I hear a radio/fuzzy distorted noise
  coming from the phone. To make it stop I need to unlock and lock the
  screen again but this is not ideal.

  -

  When the screen is locked and the playing song is finished and waiting
  for a stopped signal, MX4 will do a weird lower sound.

  How to reproduce

  Ensure MX4 is not plugged into USB
  Call the MX4 and hear the ringtone
  Dismiss the call
  Push the power button to turn off the screen
  Tick Tick Tick
  Push the power button to turn on the screen
  hissing
  Push the power button to turn off the screen
  Tick Tick Tick
  etc

  It will not clear until you play another sound
  Does not happen in silent mode of course

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1477838/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531548] Re: Xorg crashed with SIGSEGV

2016-01-06 Thread Apport retracing service
*** This bug is a duplicate of bug 1522109 ***
https://bugs.launchpad.net/bugs/1522109

Thank you for taking the time to report this crash and helping to make
this software better.  This particular crash has already been reported
and is a duplicate of bug #1522109, so is being marked as such.  Please
look at the other bug report to see if there is any missing information
that you can provide, or to see if there is a workaround for the bug.
Additionally, any further discussion regarding the bug should occur in
the other report.  Please continue to report any other bugs you may
find.

** Attachment removed: "CoreDump.gz"
   
https://bugs.launchpad.net/bugs/1531548/+attachment/4545032/+files/CoreDump.gz

** Attachment removed: "Disassembly.txt"
   
https://bugs.launchpad.net/bugs/1531548/+attachment/4545035/+files/Disassembly.txt

** Attachment removed: "ProcMaps.txt"
   
https://bugs.launchpad.net/bugs/1531548/+attachment/4545048/+files/ProcMaps.txt

** Attachment removed: "ProcStatus.txt"
   
https://bugs.launchpad.net/bugs/1531548/+attachment/4545050/+files/ProcStatus.txt

** Attachment removed: "Registers.txt"
   
https://bugs.launchpad.net/bugs/1531548/+attachment/4545051/+files/Registers.txt

** Attachment removed: "Stacktrace.txt"
   
https://bugs.launchpad.net/bugs/1531548/+attachment/4545052/+files/Stacktrace.txt

** Attachment removed: "ThreadStacktrace.txt"
   
https://bugs.launchpad.net/bugs/1531548/+attachment/4545053/+files/ThreadStacktrace.txt

** This bug has been marked a duplicate of private bug 1522109

** Information type changed from Private to Public

** Tags removed: need-amd64-retrace

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1531548

Title:
  Xorg crashed with SIGSEGV

Status in xorg-server package in Ubuntu:
  New

Bug description:
  I don't believe I was doing anything special when my login session
  crashed.

  ProblemType: Crash
  DistroRelease: Ubuntu 15.10
  Package: xserver-xorg-core 2:1.17.2-1ubuntu9.1
  ProcVersionSignature: Ubuntu 4.2.0-23.28-generic 4.2.6
  Uname: Linux 4.2.0-23-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Wed Jan  6 11:28:20 2016
  DistUpgraded: 2015-11-29 23:31:11,663 DEBUG enabling apt cron job
  DistroCodename: wily
  DistroVariant: ubuntu
  ExecutablePath: /usr/bin/Xorg
  ExecutableTimestamp: 1447349866
  ExtraDebuggingInterest: Yes, including running git bisection searches
  GraphicsCard:
   Intel Corporation Crystal Well Integrated Graphics Controller [8086:0d26] 
(rev 08) (prog-if 00 [VGA controller])
 Subsystem: CLEVO/KAPOK Computer Device [1558:7410]
  MachineType: System76, Inc. Galago UltraPro
  ProcCmdline: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 
-nolisten tcp vt7 -novtswitch
  ProcCwd: /
  ProcEnviron:
   
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-23-generic 
root=UUID=9a35e457-d298-41c4-9274-a5e8eb9f78c5 ro i915.disable_power_well=0 
quiet splash vt.handoff=7
  SegvAnalysis:
   Segfault happened at: 0x7f0fec08fcf9:cmpb   $0x48,(%rax)
   PC (0x7f0fec08fcf9) ok
   source "$0x48" ok
   destination "(%rax)" (0x0071) not located in a known VMA region (needed 
writable region)!
  SegvReason: writing NULL VMA
  Signal: 11
  SourcePackage: xorg-server
  StacktraceTop:
   ?? ()
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
   ?? () from /usr/lib/xorg/modules/drivers/intel_drv.so
  Title: Xorg crashed with SIGSEGV
  UpgradeStatus: Upgraded to wily on 2015-11-30 (37 days ago)
  UserGroups:
   
  dmi.bios.date: 07/09/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.5
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: Galago UltraPro
  dmi.board.vendor: System76, Inc.
  dmi.board.version: galu1
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: System76, Inc,
  dmi.chassis.version: galu1
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd07/09/2013:svnSystem76,Inc.:pnGalagoUltraPro:pvrgalu1:rvnSystem76,Inc.:rnGalagoUltraPro:rvrgalu1:cvnSystem76,Inc,:ct9:cvrgalu1:
  dmi.product.name: Galago UltraPro
  dmi.product.version: galu1
  dmi.sys.vendor: System76, Inc.
  version.compiz: compiz 1:0.9.12.2+15.10.20151015-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.64-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.2-1ubuntu4
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.2-1ubuntu4
  version.xserver-xorg-core: xserver-xorg-core

[Desktop-packages] [Bug 322271] Re: Sorting by name doesn't work well with digits or special chars

2016-01-06 Thread Tomas Petricek
I simply don't believe this is a design choice:
a a.txt
aa a.txt
a b.txt
k a.txt
k b.txt
kk a.txt

There should be at least an option for the simple alphabetical ordering.
Also, I believe the priority should be higher since listing files is the main 
function of a file browser...

** Attachment added: "A screenshot of an unexpected file ordering."
   
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/322271/+attachment/4545062/+files/nautilus_wrong_file_ordering.png

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/322271

Title:
  Sorting by name doesn't work well with digits or special chars

Status in Nautilus:
  Confirmed
Status in nautilus package in Ubuntu:
  Triaged

Bug description:
  Binary package hint: nautilus

  On my local disk there is a folder with the following contents:

  stefan@ubuntu:~/Dokumente/*/*/*/FLASCHEN_15cm$ ls
  0,2LMW  0,33LMW  0,5LMW  0,5LMWPET  1,0LEWPET  1,5LEWPET

  I did not include the full path for legal reasons, since it includes
  names of my customers and brand names. Instead of these, I put * to
  indicate another subdirectory.

  However, when I display this folder in nautilus sorting alphabetically
  by file name, the resulting order is:

  0,2LMW  0,5LMW  0,5LMWPET  0,33LMW  1,0LEWPET  1,5LEWPET

  ProblemType: Bug
  Architecture: i386
  DistroRelease: Ubuntu 8.10
  ExecutablePath: /usr/bin/nautilus
  NonfreeKernelModules: ath_hal
  Package: nautilus 1:2.24.1-0ubuntu1
  ProcEnviron:
   PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  Uname: Linux 2.6.27-9-generic i686

To manage notifications about this bug go to:
https://bugs.launchpad.net/nautilus/+bug/322271/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1518411] Re: "Maximum number of clients reached", new in Ubuntu 15.10

2016-01-06 Thread Jonathan Kamens
This has something to do with the fact that I have a script running in
the background that changes my background image every couple minutes.
When I disable that script, the problem goes away.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1518411

Title:
  "Maximum number of clients reached", new in Ubuntu 15.10

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  In my newly upgraded (from 15.04) Ubuntu 15.10 system, after I've been
  logged in for a while I can no longer open new windows and instead get
  a "Maximum number of clients reached" error.

  This did not happen in 15.04.

  I ran "lsof" on the X server and did not see an excessive number of
  open file descriptors. I ran it again on a newly restarted X server
  and the number of open file descriptors looked about the same.

  I also ran "xlsclients" when the X server was reporting "Maximum
  number of clients reached" and the list of clients looked correct and
  reasonable (and there were less than 30 of them).

  I am happy to collect any additional logs or debugging information to
  help track this down. I don't know where to look further.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: xserver-xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
  Uname: Linux 4.2.0-18-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Fri Nov 20 13:00:09 2015
  DistUpgraded: 2015-11-17 11:59:09,835 DEBUG enabling apt cron job
  DistroCodename: wily
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 5.0.4, 3.19.0-33-generic, x86_64: installed
   virtualbox, 5.0.4, 4.2.0-18-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation Crystal Well Integrated Graphics Controller [8086:0d26] 
(rev 08) (prog-if 00 [VGA controller])
 Subsystem: CLEVO/KAPOK Computer Device [1558:7410]
  MachineType: System76, Inc. Galago UltraPro
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic 
root=UUID=821f94aa-97e2-4384-8494-9f510a75877b ro i915.disable_power_well=0 
quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: Upgraded to wily on 2015-11-17 (3 days ago)
  dmi.bios.date: 12/12/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.5
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: W740SU
  dmi.board.vendor: Notebook
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: Notebook
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd12/12/2013:svnSystem76,Inc.:pnGalagoUltraPro:pvrgalu1:rvnNotebook:rnW740SU:rvrNotApplicable:cvnNotebook:ct9:cvrN/A:
  dmi.product.name: Galago UltraPro
  dmi.product.version: galu1
  dmi.sys.vendor: System76, Inc.
  version.compiz: compiz 1:0.9.12.2+15.10.20151015-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.64-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.2-1ubuntu4
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.2-1ubuntu4
  version.xserver-xorg-core: xserver-xorg-core 2:1.17.2-1ubuntu9
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:7.5.0+git20150819-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20150808-0ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu3
  xserver.bootTime: Fri Nov 20 12:51:23 2015
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.17.2-1ubuntu9
  xserver.video_driver: intel

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1518411/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1477838] Re: [MX4] Crackling sound after playing audio and suspended

2016-01-06 Thread Pat McGowan
Lets take a closer look this week

** Changed in: canonical-devices-system-image
Milestone: backlog => ww02-2016

** Changed in: canonical-devices-system-image
 Assignee: Yuan-Chen Cheng (ycheng-twn) => John McAleely (john.mcaleely)

** Changed in: pulseaudio (Ubuntu)
 Assignee: (unassigned) => David Henningsson (diwic)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1477838

Title:
  [MX4] Crackling sound after playing audio and suspended

Status in Canonical System Image:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  The Meizu MX4 is doing a weird "tic tic tic..." after receive a
  notification (from telegram, mail...) and it's suspended.

  --

  When I press the screen lock button on the MX4 shortly after playing
  music or ending a phone call I hear a radio/fuzzy distorted noise
  coming from the phone. To make it stop I need to unlock and lock the
  screen again but this is not ideal.

  -

  When the screen is locked and the playing song is finished and waiting
  for a stopped signal, MX4 will do a weird lower sound.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1477838/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1518411] Re: "Maximum number of clients reached", new in Ubuntu 15.10

2016-01-06 Thread MP Momo
Makes two..  I've got the same problem

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1518411

Title:
  "Maximum number of clients reached", new in Ubuntu 15.10

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  In my newly upgraded (from 15.04) Ubuntu 15.10 system, after I've been
  logged in for a while I can no longer open new windows and instead get
  a "Maximum number of clients reached" error.

  This did not happen in 15.04.

  I ran "lsof" on the X server and did not see an excessive number of
  open file descriptors. I ran it again on a newly restarted X server
  and the number of open file descriptors looked about the same.

  I also ran "xlsclients" when the X server was reporting "Maximum
  number of clients reached" and the list of clients looked correct and
  reasonable (and there were less than 30 of them).

  I am happy to collect any additional logs or debugging information to
  help track this down. I don't know where to look further.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: xserver-xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
  Uname: Linux 4.2.0-18-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Fri Nov 20 13:00:09 2015
  DistUpgraded: 2015-11-17 11:59:09,835 DEBUG enabling apt cron job
  DistroCodename: wily
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 5.0.4, 3.19.0-33-generic, x86_64: installed
   virtualbox, 5.0.4, 4.2.0-18-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation Crystal Well Integrated Graphics Controller [8086:0d26] 
(rev 08) (prog-if 00 [VGA controller])
 Subsystem: CLEVO/KAPOK Computer Device [1558:7410]
  MachineType: System76, Inc. Galago UltraPro
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic 
root=UUID=821f94aa-97e2-4384-8494-9f510a75877b ro i915.disable_power_well=0 
quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: Upgraded to wily on 2015-11-17 (3 days ago)
  dmi.bios.date: 12/12/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.5
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: W740SU
  dmi.board.vendor: Notebook
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: Notebook
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd12/12/2013:svnSystem76,Inc.:pnGalagoUltraPro:pvrgalu1:rvnNotebook:rnW740SU:rvrNotApplicable:cvnNotebook:ct9:cvrN/A:
  dmi.product.name: Galago UltraPro
  dmi.product.version: galu1
  dmi.sys.vendor: System76, Inc.
  version.compiz: compiz 1:0.9.12.2+15.10.20151015-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.64-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.2-1ubuntu4
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.2-1ubuntu4
  version.xserver-xorg-core: xserver-xorg-core 2:1.17.2-1ubuntu9
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:7.5.0+git20150819-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20150808-0ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu3
  xserver.bootTime: Fri Nov 20 12:51:23 2015
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.17.2-1ubuntu9
  xserver.video_driver: intel

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1518411/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1518411] Re: "Maximum number of clients reached", new in Ubuntu 15.10

2016-01-06 Thread Launchpad Bug Tracker
Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: xorg (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1518411

Title:
  "Maximum number of clients reached", new in Ubuntu 15.10

Status in xorg package in Ubuntu:
  Confirmed

Bug description:
  In my newly upgraded (from 15.04) Ubuntu 15.10 system, after I've been
  logged in for a while I can no longer open new windows and instead get
  a "Maximum number of clients reached" error.

  This did not happen in 15.04.

  I ran "lsof" on the X server and did not see an excessive number of
  open file descriptors. I ran it again on a newly restarted X server
  and the number of open file descriptors looked about the same.

  I also ran "xlsclients" when the X server was reporting "Maximum
  number of clients reached" and the list of clients looked correct and
  reasonable (and there were less than 30 of them).

  I am happy to collect any additional logs or debugging information to
  help track this down. I don't know where to look further.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: xserver-xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 4.2.0-18.22-generic 4.2.3
  Uname: Linux 4.2.0-18-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Fri Nov 20 13:00:09 2015
  DistUpgraded: 2015-11-17 11:59:09,835 DEBUG enabling apt cron job
  DistroCodename: wily
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 5.0.4, 3.19.0-33-generic, x86_64: installed
   virtualbox, 5.0.4, 4.2.0-18-generic, x86_64: installed
  ExtraDebuggingInterest: Yes
  GraphicsCard:
   Intel Corporation Crystal Well Integrated Graphics Controller [8086:0d26] 
(rev 08) (prog-if 00 [VGA controller])
 Subsystem: CLEVO/KAPOK Computer Device [1558:7410]
  MachineType: System76, Inc. Galago UltraPro
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-18-generic 
root=UUID=821f94aa-97e2-4384-8494-9f510a75877b ro i915.disable_power_well=0 
quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: Upgraded to wily on 2015-11-17 (3 days ago)
  dmi.bios.date: 12/12/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.5
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: W740SU
  dmi.board.vendor: Notebook
  dmi.board.version: Not Applicable
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: Notebook
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd12/12/2013:svnSystem76,Inc.:pnGalagoUltraPro:pvrgalu1:rvnNotebook:rnW740SU:rvrNotApplicable:cvnNotebook:ct9:cvrN/A:
  dmi.product.name: Galago UltraPro
  dmi.product.version: galu1
  dmi.sys.vendor: System76, Inc.
  version.compiz: compiz 1:0.9.12.2+15.10.20151015-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.64-1
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.2-1ubuntu4
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.2-1ubuntu4
  version.xserver-xorg-core: xserver-xorg-core 2:1.17.2-1ubuntu9
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:7.5.0+git20150819-0ubuntu1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20150808-0ubuntu4
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu3
  xserver.bootTime: Fri Nov 20 12:51:23 2015
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.17.2-1ubuntu9
  xserver.video_driver: intel

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1518411/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1506107] Update Released

2016-01-06 Thread Chris J Arges
The verification of the Stable Release Update for xserver-xorg-video-
intel has completed successfully and the package has now been released
to -updates.  Subsequently, the Ubuntu Stable Release Updates Team is
being unsubscribed and will not receive messages about this bug report.
In the event that you encounter a regression using the package from
-updates please report a new bug using ubuntu-bug and tag the bug report
regression-update so we can easily find any regressions.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1506107

Title:
  Bad webcam video rendering when using XV acceleration on Skylake gpus.

Status in HWE Next:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Fix Released
Status in xserver-xorg-video-intel-lts-vivid source package in Trusty:
  In Progress
Status in xserver-xorg-video-intel source package in Vivid:
  Fix Released

Bug description:
  CPU: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz
  GPU: Intel Corporation Device [8086:1916] (rev 07)
  Webcam: 0bda:57e3 Realtek Semiconductor Corp.

  [Impact] 
  We noticed that webcam output on a wide range of skylake systems contained 
corruption during certification testing of OEM machines which uses a certain 
gstreamer pipeline. An example of the corruption is attached.

  [Test Case]
  1. Boot ubuntu 14.04.3 or 15.04 on a machine with a skylake intel GPU and a 
webcam
  2. Login system and open a terminal.
  4. Execute '$ gst-launch-0.10 v4l2src ! xvimagesink'

  Expect result:
  There should be no visual artifacts during video playing.  The artifacts will 
look like the attached video and be very obvious in the unfixed package.

  [Regression Potential] 
  Low, the fix is very minimal was included immediately after the 2.99.917 
release was made. It consists of 2 parts, a small patch 
(http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/commit/?id=cc9d7f603037d0d7eff346dd350f4d8b3f31)
 and a configure option change. The configure option change was in lieu of 
http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/commit/?id=986cb2335c30792e24a7e2b930ecaa3fa051809a
 which flipped it on unconditionally and only affects i915_bpo in both of these 
releases as it requires a 4.0 or newer kernel (i915_bpo is a backport of i915 
from 4.2 that is only used on skylake). Both of these changes are already in 
wily's xserver-xorg-video-intel.

  It has been tested on a large number of machines during certification,
  and also by me on sandybridge, ivybridge, broadwell and skylake
  machines.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1506107/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1506107] Re: Bad webcam video rendering when using XV acceleration on Skylake gpus.

2016-01-06 Thread Launchpad Bug Tracker
This bug was fixed in the package xserver-xorg-video-intel -
2:2.99.917-1~exp1ubuntu2.3

---
xserver-xorg-video-intel (2:2.99.917-1~exp1ubuntu2.3) vivid-proposed; 
urgency=medium

  * Add sna-reject-cpu-blits-that-require-format-conversions.patch and build 
with
--enable-wc-mmap: Fix webcam problems on Skylake (LP: #1506107)

 -- Robert Hooker   Tue, 13 Oct 2015 12:25:21 -0400

** Changed in: xserver-xorg-video-intel (Ubuntu Vivid)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1506107

Title:
  Bad webcam video rendering when using XV acceleration on Skylake gpus.

Status in HWE Next:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Fix Released
Status in xserver-xorg-video-intel-lts-vivid source package in Trusty:
  In Progress
Status in xserver-xorg-video-intel source package in Vivid:
  Fix Released

Bug description:
  CPU: Intel(R) Core(TM) i3-6100U CPU @ 2.30GHz
  GPU: Intel Corporation Device [8086:1916] (rev 07)
  Webcam: 0bda:57e3 Realtek Semiconductor Corp.

  [Impact] 
  We noticed that webcam output on a wide range of skylake systems contained 
corruption during certification testing of OEM machines which uses a certain 
gstreamer pipeline. An example of the corruption is attached.

  [Test Case]
  1. Boot ubuntu 14.04.3 or 15.04 on a machine with a skylake intel GPU and a 
webcam
  2. Login system and open a terminal.
  4. Execute '$ gst-launch-0.10 v4l2src ! xvimagesink'

  Expect result:
  There should be no visual artifacts during video playing.  The artifacts will 
look like the attached video and be very obvious in the unfixed package.

  [Regression Potential] 
  Low, the fix is very minimal was included immediately after the 2.99.917 
release was made. It consists of 2 parts, a small patch 
(http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/commit/?id=cc9d7f603037d0d7eff346dd350f4d8b3f31)
 and a configure option change. The configure option change was in lieu of 
http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/commit/?id=986cb2335c30792e24a7e2b930ecaa3fa051809a
 which flipped it on unconditionally and only affects i915_bpo in both of these 
releases as it requires a 4.0 or newer kernel (i915_bpo is a backport of i915 
from 4.2 that is only used on skylake). Both of these changes are already in 
wily's xserver-xorg-video-intel.

  It has been tested on a large number of machines during certification,
  and also by me on sandybridge, ivybridge, broadwell and skylake
  machines.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1506107/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1377653] Re: HDMI sound output not detected / NVIDIA optimus laptop

2016-01-06 Thread Sagar GV
I am facing the same issue in Ubuntu 14.04 of audio not working over
HDMI on Dell L502x with nVidia GT525M (Optimus), and the workaround
suggested by (bcmpinc) above resolves the problem (although the
workaround needs to be applied after each reboot).

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1377653

Title:
  HDMI sound output not detected / NVIDIA optimus laptop

Status in alsa-driver package in Ubuntu:
  Confirmed

Bug description:
  Hi,

  not sure if this is an alsa or nvidia/nouveau bug.
  HDMI audio output doesn't appear in sound settings output panel.
  Audio works well on internal speakers, but it seems there is no way to make 
it output to hdmi...

  The laptop has optimus NVIDIA+Intel.
  The behaviour is the same with nouveau or nvidia proprietary driver.

  Please let me know if further testing is required

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: alsa-base 1.0.25+dfsg-0ubuntu4
  ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6
  Uname: Linux 3.13.0-36-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  sam2295 F pulseaudio
  CurrentDesktop: Unity
  CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order 
/var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission 
denied
  Date: Sun Oct  5 17:05:35 2014
  InstallationDate: Installed on 2014-04-21 (166 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Title: PCI/internal sound card not detected
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/02/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: N56VZ.215
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: N56VZ
  dmi.board.vendor: ASUSTeK COMPUTER INC.
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 10
  dmi.chassis.vendor: ASUSTeK COMPUTER INC.
  dmi.chassis.version: 1.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrN56VZ.215:bd11/02/2012:svnASUSTeKCOMPUTERINC.:pnN56VZ:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN56VZ:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0:
  dmi.product.name: N56VZ
  dmi.product.version: 1.0
  dmi.sys.vendor: ASUSTeK COMPUTER INC.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1377653/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1522177] Re: nautilus sporadically very slow to start/refresh

2016-01-06 Thread Reece
Figured this out. Closing.

Cause:
I had intentionally put my home directory under mercurial, primarily to track 
config files. .hgignore ignored everything.

The tortoisehg extension apparently ignores .hgignore. When I ran
nautilus with strace, the problem became clear: tortoisehg was
recursively stat'ing my entire home directory.


** Changed in: nautilus (Ubuntu)
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1522177

Title:
  nautilus sporadically very slow to start/refresh

Status in nautilus package in Ubuntu:
  Invalid

Bug description:
  System: Ubuntu 15.10, x86_64, SSD drive

  Nautilus is sporadically extremely slow to start up or refresh a view
  even when already running. The effect is bimodal: response is either
  nearly immediate or extremely slow. For example, "nautilus ~/" is
  either immediately responsive or takes ~10 seconds.

  The behavior is independent of directory and invocation method; for
  example, invoking via Unity Dash or Chrome's "show in folder" exhibits
  similar bimodal responsiveness.

  The bimodal switch seems to be related to a combination of when the
  directory was last read (likely a cache effect) and whether the
  directory had been modified (e.g., perhaps based on directory mtime).

  The attached script and output demonstrate the effect on my laptop. It
  executes "nautilus ~/" ten times, with sleep times of 0-5 seconds
  between each. The data suggest that the bimodal switch due to a
  putative cache timeout is ~5 seconds. That is, *all* invocations
  separated by more that 5 seconds exhibit the slow mode responsiveness.

  This is consistent with my experience, namely that nautilus startup is
  *always* slow because real-world use invocations are always more than
  5 seconds apart.

  Access to the same directories in the terminal are never slow. I am
  not aware of any general filesystem sluggishness (e.g., with
  libreoffice, emacs, etc).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1522177/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531292] Re: startup applications overwrites entries

2016-01-06 Thread Sebastien Bacher
Thank you for taking the time to report this bug and helping to make
Ubuntu better. The issue you are reporting is an upstream one and it
would be nice if somebody having it could send the bug to the developers
of the software by following the instructions at
https://wiki.ubuntu.com/Bugs/Upstream/GNOME. If you have done so, please
tell us the number of the upstream bug (or the link), so we can add a
bugwatch that will inform us about its status. Thanks in advance.

** Changed in: gnome-session (Ubuntu)
   Importance: Undecided => Low

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-session in Ubuntu.
https://bugs.launchpad.net/bugs/1531292

Title:
  startup applications overwrites entries

Status in gnome-session package in Ubuntu:
  New

Bug description:
  When using the startup applications GUI, scripts with the same file name but 
different paths will overwrite each other. For instance, if I added an entry as:
  Name: program1
  Command: /home/user/scripts/program1/run
  Comment: program 1

  I can exit the startup applications window and everything saves fine.

  But if I later reopen and add an entry:
  Name: program2
  Command: /home/user/scripts/program2/run
  Comment: program 2

  both records will display on the main menu, but after closing and
  reopening the window, only program2 will be listed. The record for
  program2 overwrites the record for program1 when the startup
  applications window closes, but it looks like it works fine before you
  close it. If I named my script for program2, 'run2', as in:
  '/home/user/scripts/program2/run2', both records will be kept.

  
  Additional info:--
  apt-cache policy gnome-session-bin
  gnome-session-bin:
Installed: 3.9.90-0ubuntu12.1
Candidate: 3.9.90-0ubuntu12.1
Version table:
   *** 3.9.90-0ubuntu12.1 0
  500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 
Packages
  100 /var/lib/dpkg/status
   3.9.90-0ubuntu12 0
  500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages

  
  lsb_release -rd
  Description:  Ubuntu 14.04.3 LTS
  Release:  14.04

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: gnome-session-bin 3.9.90-0ubuntu12.1
  ProcVersionSignature: Ubuntu 3.16.0-55.74~14.04.1-generic 3.16.7-ckt19
  Uname: Linux 3.16.0-55-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Tue Jan  5 16:13:00 2016
  InstallationDate: Installed on 2015-12-07 (29 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 
(20150218.1)
  ProcEnviron:
   LANGUAGE=en_US
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-session
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-session/+bug/1531292/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531316] Re: Totem in full screen crashes Xorg

2016-01-06 Thread Sebastien Bacher
Thanks, could you provide details on your video card and driver? Adding
your xorg log and a backtrace of the issue could also be needed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1531316

Title:
  Totem in full screen crashes Xorg

Status in xorg package in Ubuntu:
  New

Bug description:
  I tried reporting this to Totem[1], but they assured me this is an
  issue with X.

  I've tried playing both mkv and avi files in Totem in a almost totally
  newly installed Ubuntu Gnome 15.10 64 bit, updated to Gnome 3.18 with
  the Gnome Staging PPA.

  Every time I play the files in full screen mode the screen turns black
  and I'm logged out of my session. When I log back in I see that all
  programs are closed.

  This happens at different times after going to full screen mode. Some
  times after a second, other times after a few minutes.

  It only happens in full screen, I can play the video for as long as I
  want if I don't go full screen. It also only happens in Totem, I don't
  experience it in full screen in VLC.

  I don't know how to find the log files from the crash, but please let
  me know how to do that if it can help.

  This is quite critical for the adaptation of (Ubuntu) Gnome. Non
  technical people will soon give up Linux if their first meeting with
  it is that they can't play videos in full screen mode (they won't
  think of the possibility of installing some other video player). So I
  hope you will look into this closely even though it's a bit vague. If
  there's anything I can do to help, please let me know!

  Thanks!

  [1] https://bugzilla.gnome.org/show_bug.cgi?id=760078

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531316/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1477838] Re: [MX4] Crackling sound after playing audio and suspended

2016-01-06 Thread Launchpad Bug Tracker
Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: pulseaudio (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1477838

Title:
  [MX4] Crackling sound after playing audio and suspended

Status in Canonical System Image:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  The Meizu MX4 is doing a weird "tic tic tic..." after receive a
  notification (from telegram, mail...) and it's suspended.

  --

  When I press the screen lock button on the MX4 shortly after playing
  music or ending a phone call I hear a radio/fuzzy distorted noise
  coming from the phone. To make it stop I need to unlock and lock the
  screen again but this is not ideal.

  -

  When the screen is locked and the playing song is finished and waiting
  for a stopped signal, MX4 will do a weird lower sound.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1477838/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1477838] Re: [MX4] Crackling sound after playing audio and suspended

2016-01-06 Thread Bill Filler
** Also affects: pulseaudio (Ubuntu)
   Importance: Undecided
   Status: New

** No longer affects: telephony-service (Ubuntu)

** Changed in: canonical-devices-system-image
   Importance: Medium => High

** Changed in: pulseaudio (Ubuntu)
   Importance: Undecided => High

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1477838

Title:
  [MX4] Crackling sound after playing audio and suspended

Status in Canonical System Image:
  Confirmed
Status in pulseaudio package in Ubuntu:
  New

Bug description:
  The Meizu MX4 is doing a weird "tic tic tic..." after receive a
  notification (from telegram, mail...) and it's suspended.

  --

  When I press the screen lock button on the MX4 shortly after playing
  music or ending a phone call I hear a radio/fuzzy distorted noise
  coming from the phone. To make it stop I need to unlock and lock the
  screen again but this is not ideal.

  -

  When the screen is locked and the playing song is finished and waiting
  for a stopped signal, MX4 will do a weird lower sound.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1477838/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1530554] Re: pavucontrol (pavucontrol_3.0-3build1_amd64.deb) not run:

2016-01-06 Thread Phillip Susi
** Changed in: pavucontrol (Ubuntu)
   Status: New => Invalid

** Project changed: pulseaudio => ubuntu

** No longer affects: ubuntu

** Project changed: gnome-system-monitor => gnome-system-monitor
(Ubuntu)

** Changed in: gnome-system-monitor (Ubuntu)
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-system-monitor in Ubuntu.
https://bugs.launchpad.net/bugs/1530554

Title:
  pavucontrol (pavucontrol_3.0-3build1_amd64.deb) not run:

Status in gnome-system-monitor package in Ubuntu:
  Invalid
Status in pavucontrol package in Ubuntu:
  Invalid

Bug description:
  pavucontrol CAN NOT be RUN on Ubuntu 15.10 (Xubuntu):

  # pavucontrol 
  pavucontrol: symbol lookup error: 
/usr/lib/x86_64-linux-gnu/libgiomm-2.4.so.1: undefined symbol: 
_ZN4Glib11VariantTypeD1Ev

  ~~~

  # uname -a
  Linux Dell-XPS-L502X 4.2.0-22-generic #27-Ubuntu SMP Thu Dec 17 22:57:08 UTC 
2015 x86_64 x86_64 x86_64 GNU/Linux

  # cat /proc/version
  Linux version 4.2.0-22-generic (buildd@lcy01-22) (gcc version 5.2.1 20151010 
(Ubuntu 5.2.1-22ubuntu2) ) #27-Ubuntu SMP Thu Dec 17 22:57:08 UTC 2015

  # lsb_release 
  LSB Version:  
core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch:core-4.1-amd64:core-4.1-noarch

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-system-monitor/+bug/1530554/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531504] Re: please merge xdg-utils from debian

2016-01-06 Thread LocutusOfBorg
** Attachment added: "debdiff"
   
https://bugs.launchpad.net/ubuntu/+source/xdg-utils/+bug/1531504/+attachment/4544983/+files/debdiff

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xdg-utils in Ubuntu.
https://bugs.launchpad.net/bugs/1531504

Title:
  please merge xdg-utils from debian

Status in xdg-utils package in Ubuntu:
  New

Bug description:
  debdiff attached.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xdg-utils/+bug/1531504/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531504] [NEW] please merge xdg-utils from debian

2016-01-06 Thread LocutusOfBorg
Public bug reported:

debdiff attached.

** Affects: xdg-utils (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xdg-utils in Ubuntu.
https://bugs.launchpad.net/bugs/1531504

Title:
  please merge xdg-utils from debian

Status in xdg-utils package in Ubuntu:
  New

Bug description:
  debdiff attached.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xdg-utils/+bug/1531504/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1530554] [NEW] pavucontrol (pavucontrol_3.0-3build1_amd64.deb) not run:

2016-01-06 Thread Launchpad Bug Tracker
You have been subscribed to a public bug:

pavucontrol CAN NOT be RUN on Ubuntu 15.10 (Xubuntu):

# pavucontrol 
pavucontrol: symbol lookup error: /usr/lib/x86_64-linux-gnu/libgiomm-2.4.so.1: 
undefined symbol: _ZN4Glib11VariantTypeD1Ev

~~~

# uname -a
Linux Dell-XPS-L502X 4.2.0-22-generic #27-Ubuntu SMP Thu Dec 17 22:57:08 UTC 
2015 x86_64 x86_64 x86_64 GNU/Linux

# cat /proc/version
Linux version 4.2.0-22-generic (buildd@lcy01-22) (gcc version 5.2.1 20151010 
(Ubuntu 5.2.1-22ubuntu2) ) #27-Ubuntu SMP Thu Dec 17 22:57:08 UTC 2015

# lsb_release 
LSB Version:
core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch:core-4.1-amd64:core-4.1-noarch

** Affects: gnome-system-monitor (Ubuntu)
 Importance: Undecided
 Status: Invalid

** Affects: pavucontrol (Ubuntu)
 Importance: Undecided
 Status: Invalid

-- 
pavucontrol (pavucontrol_3.0-3build1_amd64.deb) not run: 
https://bugs.launchpad.net/bugs/1530554
You received this bug notification because you are a member of Desktop 
Packages, which is subscribed to gnome-system-monitor in Ubuntu.

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1515711] Re: lightdm hangs, windows freeze, lightdm restart helps most of the times.

2016-01-06 Thread Xtien
I am still experiencing this issue. Not just with Android Studio, it also 
happened when loading a file in Gedit. CPU2 goes to 100% and stays there, while 
Gedit or AS stops responding. In the System Monitor "Processes" tab, no 
processes are taking more than 1 or 2% of a CPU. The process that froze has 0%, 
but >600Mb memory usage. The process unfreezes typically after 5 minutes. 
Almost always it's cpu2, once it was 9, occasionally it's cpu3. 
I have a 6core cpu, 16G of memory.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1515711

Title:
  lightdm hangs, windows freeze, lightdm restart helps most of the
  times.

Status in lightdm package in Ubuntu:
  New

Bug description:
  Since a few days, when I use Android Studio, my screens freeze.
  Nothing works. With alt-crtrl-F2 I log in to a shell window, restart
  lightdm, then it works. Except on the last freeze, now I had to
  restart the computer. When restarting lightdm, a popup said "system in
  low graphics res, cannot detect your settings".

  I have reported the but to Android Studio developers. But a program,
  even a big one like an IDE, should not be able to crash my computer.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: lightdm 1.14.2-0ubuntu1.1
  ProcVersionSignature: Ubuntu 3.19.0-33.38-generic 3.19.8-ckt7
  Uname: Linux 3.19.0-33-generic x86_64
  NonfreeKernelModules: nvidia
  ApportVersion: 2.17.2-0ubuntu1.7
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Thu Nov 12 18:22:33 2015
  EcryptfsInUse: Yes
  InstallationDate: Installed on 2015-10-02 (41 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  SourcePackage: lightdm
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1515711/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


Re: [Desktop-packages] [Bug 1245805] Re: Crash with stacktrace, error code 30 in validate_encryption_settings

2016-01-06 Thread Kenneth Loafman
This error is due to missing volumes.  Try doing a 'duplicity cleanup
--force ', then run the backup again.


On Sun, Jan 3, 2016 at 3:06 AM, macho <1245...@bugs.launchpad.net> wrote:

> I'm still getting this crash on Ubuntu 15.10 with duplicity 0.7.02.
>
> My initial full backup seemed to be stalled (destination stopped
> growing), so I did ^C and restarted:
>
> # duplicity --full-if-older-than 2W --no-encryption
> --exclude-other-filesystems $home_source $home_target
> Local and Remote metadata are synchronized, no sync needed.
> Last full backup left a partial set, restarting.
> Last full backup date: Sat Jan  2 02:14:14 2016
> RESTART: Volumes 82 to 525 failed to upload before termination.
>  Restarting backup at volume 82.
> Traceback (most recent call last):
>   File "/usr/bin/duplicity", line 1519, in 
> with_tempdir(main)
>   File "/usr/bin/duplicity", line 1513, in with_tempdir
> fn()
>   File "/usr/bin/duplicity", line 1370, in main
> do_backup(action)
>   File "/usr/bin/duplicity", line 1483, in do_backup
> full_backup(col_stats)
>   File "/usr/bin/duplicity", line 560, in full_backup
> globals.backend)
>   File "/usr/bin/duplicity", line 375, in write_multivol
> validate_encryption_settings(globals.restart.last_backup, mf)
>   File "/usr/bin/duplicity", line 354, in validate_encryption_settings
> if vol1_filename != backup_set.volume_name_dict[1]:
> KeyError: 1
>
> I'll try a fresh full backup, but I fear it will stall and/or crash
> again.
>
> --
> You received this bug notification because you are subscribed to
> duplicity in Ubuntu.
> https://bugs.launchpad.net/bugs/1245805
>
> Title:
>   Crash with stacktrace, error code 30 in validate_encryption_settings
>
> Status in Duplicity:
>   New
> Status in duplicity package in Ubuntu:
>   Confirmed
>
> Bug description:
>   While running duplicity through duply, I get:
>
>   [...]
>   Found primary backup chain with matching signature chain:
>   -
>   Chain start time: Fri Oct 25 17:41:51 2013
>   Chain end time: Fri Oct 25 17:41:51 2013
>   Number of contained backup sets: 1
>   Total number of contained volumes: 13
>Type of backup set:Time:  Num volumes:
>   Full Fri Oct 25 17:41:51 201313
>   -
>   No orphaned or incomplete backup sets found.
>   Reuse configured PASSPHRASE as SIGN_PASSPHRASE
>   RESTART: Volumes 13 to 473 failed to upload before termination.
>Restarting backup at volume 13.
>   Removing still remembered temporary file
> /tmp/duplicity-H1PRj7-tempdir/mkstemp-Bvibdh-1
>   Traceback (most recent call last):
> File "/usr/bin/duplicity", line 1411, in 
>   with_tempdir(main)
> File "/usr/bin/duplicity", line 1404, in with_tempdir
>   fn()
> File "/usr/bin/duplicity", line 1374, in main
>   full_backup(col_stats)
> File "/usr/bin/duplicity", line 509, in full_backup
>   globals.backend)
> File "/usr/bin/duplicity", line 346, in write_multivol
>   validate_encryption_settings(globals.restart.last_backup, mf)
> File "/usr/bin/duplicity", line 325, in validate_encryption_settings
>   if vol1_filename != backup_set.volume_name_dict[1]:
>   KeyError: 1
>
>   09:03:40.631 Task 'BKP' failed with exit code '30'.
>
>   ProblemType: Bug
>   DistroRelease: Ubuntu 13.10
>   Package: duplicity 0.6.21-0ubuntu4
>   ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3
>   Uname: Linux 3.11.0-12-generic x86_64
>   NonfreeKernelModules: wl
>   ApportVersion: 2.12.5-0ubuntu2.1
>   Architecture: amd64
>   Date: Tue Oct 29 09:04:56 2013
>   InstallationDate: Installed on 2013-10-21 (7 days ago)
>   InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64
> (20131016.1)
>   MarkForUpload: True
>   SourcePackage: duplicity
>   UpgradeStatus: No upgrade log present (probably fresh install)
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/duplicity/+bug/1245805/+subscriptions
>

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to duplicity in Ubuntu.
https://bugs.launchpad.net/bugs/1245805

Title:
  Crash with stacktrace, error code 30 in validate_encryption_settings

Status in Duplicity:
  New
Status in duplicity package in Ubuntu:
  Confirmed

Bug description:
  While running duplicity through duply, I get:

  [...]
  Found primary backup chain with matching signature chain:
  -
  Chain start time: Fri Oct 25 17:41:51 2013
  Chain end time: Fri Oct 25 17:41:51 2013
  Number of contained backup sets: 1
  Total number of contained volumes: 13
   Type of backup set:Time:  Num volumes:
  Full Fri Oct 25 17:41:51 201313
  -
  No orphaned or incomplete backup sets found.
  Reuse configured PASSPHRASE as SIGN_PASSPHRASE
  RESTART:

[Desktop-packages] [Bug 1514195] Re: changing border style closes libreoffice calc in i3-wm

2016-01-06 Thread Adolfo Jayme
** Changed in: libreoffice (Ubuntu)
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1514195

Title:
  changing border style closes libreoffice calc in i3-wm

Status in LibreOffice:
  Fix Released
Status in libreoffice package in Ubuntu:
  Triaged
Status in libreoffice package in Debian:
  Fix Released

Bug description:
  Hello,
  details are the same as in Debian bug #801504 
(https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=801504)
  
  Dear Maintainer,

  The same libreoffice used by the same user on the same machine works fine,
  when used in Gnome3. When used in i3-wm, after opening new spreadsheet:

  1. select any cell,
  2. click `border style` icon in menu,
  3. from the list select any border style (solid line for example).

  Libreoffice will be closed immediately. Recovery will be possible
  after relaunch.

  There is movie with crash: https://imgrush.com/LK72Y6-9xXQM
  Best,
  JS

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: libreoffice-calc 1:5.0.2-0ubuntu1
  ProcVersionSignature: Ubuntu 4.2.0-17.21-generic 4.2.3
  Uname: Linux 4.2.0-17-generic x86_64
  ApportVersion: 2.19.1-0ubuntu4
  Architecture: amd64
  CurrentDesktop: i3
  Date: Sun Nov  8 15:00:30 2015
  InstallationDate: Installed on 2015-11-04 (3 days ago)
  InstallationMedia: Ubuntu-GNOME 15.10 "Wily Werewolf" - Release amd64 
(20151021)
  SourcePackage: libreoffice
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/df-libreoffice/+bug/1514195/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1457311] Re: Xorg crash

2016-01-06 Thread Christopher M. Penalver
** Tags removed: bios-outdated-a07
** Tags added: bios-outdated-a08

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1457311

Title:
  Xorg crash

Status in xorg package in Ubuntu:
  Expired

Bug description:
  python tkinter causes xorg to crash.

  I was using this http://ai.berkeley.edu/search.html

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 3.19.0-16.16-generic 3.19.3
  Uname: Linux 3.19.0-16-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.17.2-0ubuntu1
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Thu May 21 00:46:12 2015
  DistUpgraded: 2015-05-01 13:48:55,426 DEBUG enabling apt cron job
  DistroCodename: vivid
  DistroVariant: ubuntu
  DkmsStatus:
   virtualbox, 4.3.26, 3.19.0-15-generic, x86_64: installed
   virtualbox, 4.3.26, 3.19.0-16-generic, x86_64: installed
  EcryptfsInUse: Yes
  ExtraDebuggingInterest: Yes, including running git bisection searches
  GraphicsCard:
   Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] 
(rev 0b) (prog-if 00 [VGA controller])
 Subsystem: Dell Device [1028:060a]
  InstallationDate: Installed on 2014-10-01 (232 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  MachineType: Dell Inc. XPS13 9333
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-16-generic.efi.signed 
root=UUID=25791661-9127-4464-b96a-9a016f64e1f7 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  Symptom: display
  Title: Xorg crash
  UpgradeStatus: Upgraded to vivid on 2015-05-01 (19 days ago)
  dmi.bios.date: 03/19/2014
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A04
  dmi.board.name: 0D13CR
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 8
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnDellInc.:bvrA04:bd03/19/2014:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0D13CR:rvrA00:cvnDellInc.:ct8:cvr0.1:
  dmi.product.name: XPS13 9333
  dmi.sys.vendor: Dell Inc.
  version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.60-2
  version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917-1~exp1ubuntu2.1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu2build1
  xserver.bootTime: Thu May 21 00:22:19 2015
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   product id4933 
   vendor CMN
  xserver.version: 2:1.17.1-0ubuntu3

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1457311/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531471] [NEW] Xorg suddenly closes

2016-01-06 Thread shemgp
Public bug reported:

Was just clicking around when the screen suddenly when black--went to
the virtual terminal-- after a few seconds lightdm started back up.  I
had to login and launch my apps again.  It happened a few times already.

Looked at the logs and there's a backtrace in /var/log/Xorg.0.log.old.
The new Xorg.0.log didn't have it.

Description:Ubuntu 15.10
Release:15.10

xorg:
  Installed: 1:7.7+7ubuntu4

ProblemType: Bug
DistroRelease: Ubuntu 15.10
Package: xorg 1:7.7+7ubuntu4
ProcVersionSignature: Ubuntu 4.2.0-22.27-generic 4.2.6
Uname: Linux 4.2.0-22-generic x86_64
.tmp.unity.support.test.0:
 
ApportVersion: 2.19.1-0ubuntu5
Architecture: amd64
CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,staticswitcher,workarounds,scale,expo,ezoom,dbus]
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
CurrentDesktop: Unity
Date: Wed Jan  6 19:25:15 2016
DistUpgraded: 2016-01-06 19:17:28,240 DEBUG found components: 
{'xenial-updates': {'multiverse', 'restricted', 'main', 'universe'}, 
'xenial-security': {'multiverse', 'restricted', 'main', 'universe'}, 'xenial': 
{'multiverse', 'restricted', 'main', 'universe'}}
DistroCodename: wily
DistroVariant: ubuntu
DkmsStatus: webcamstudio, 0.73, 4.2.0-22-generic, x86_64: installed
EcryptfsInUse: Yes
ExtraDebuggingInterest: Yes, including running git bisection searches
GraphicsCard:
 Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 
09) (prog-if 00 [VGA controller])
   Subsystem: Lenovo Device [17aa:2203]
InstallationDate: Installed on 2015-09-28 (99 days ago)
InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
MachineType: LENOVO 34361A0
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-22-generic.efi.signed 
root=UUID=da81a856-84d5-4ca7-8c0a-4f20006730bc ro quiet splash vt.handoff=7
SourcePackage: xorg
UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
UpgradeStatus: Upgraded to wily on 2016-01-06 (0 days ago)
dmi.bios.date: 04/09/2015
dmi.bios.vendor: LENOVO
dmi.bios.version: GCETA2WW (2.62 )
dmi.board.asset.tag: Not Available
dmi.board.name: 34361A0
dmi.board.vendor: LENOVO
dmi.board.version: Not Defined
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: 
dmi:bvnLENOVO:bvrGCETA2WW(2.62):bd04/09/2015:svnLENOVO:pn34361A0:pvrThinkPadX230Tablet:rvnLENOVO:rn34361A0:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 34361A0
dmi.product.version: ThinkPad X230 Tablet
dmi.sys.vendor: LENOVO
version.compiz: compiz 1:0.9.12.2+15.10.20151015-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.64-1
version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.2-1ubuntu4
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.2-1ubuntu4
version.xserver-xorg-core: xserver-xorg-core 2:1.17.2-1ubuntu9.1
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1
version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:7.5.0+git20150819-0ubuntu1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20150808-0ubuntu4
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu3
xserver.bootTime: Wed Jan  6 19:12:53 2016
xserver.configfile: default
xserver.logfile: /var/log/Xorg.0.log
xserver.outputs:
 product id 728 
 vendor LGD
xserver.version: 2:1.17.2-1ubuntu9.1

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 third-party-packages ubuntu wily

** Attachment added: "Xorg.0.log.old"
   
https://bugs.launchpad.net/bugs/1531471/+attachment/4544899/+files/Xorg.0.log.old

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1531471

Title:
  Xorg suddenly closes

Status in xorg package in Ubuntu:
  New

Bug description:
  Was just clicking around when the screen suddenly when black--went to
  the virtual terminal-- after a few seconds lightdm started back up.  I
  had to login and launch my apps again.  It happened a few times
  already.

  Looked at the logs and there's a backtrace in /var/log/Xorg.0.log.old.
  The new Xorg.0.log didn't have it.

  Description:  Ubuntu 15.10
  Release:  15.10

  xorg:
Installed: 1:7.7+7ubuntu4

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 4.2.0-22.27-generic 4.2.6
  Uname: Linux 4.2.0-22-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CompizPlugins: 
[core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepol

[Desktop-packages] [Bug 1531419] Re: nmcli always report the presence of a non-exisiting WWAN device

2016-01-06 Thread Po-Hsu Lin
** Summary changed:

- nmcli always report the presence of WWAN device
+ nmcli always report the presence of a non-exisiting WWAN device

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1531419

Title:
  nmcli always report the presence of a non-exisiting WWAN device

Status in network-manager package in Ubuntu:
  New

Bug description:
  When running the following command on a system without any WWAN device:
  $ nmcli radio

  It still report that the WWAN is enabled, which is quite confusing.
  WIFI-HW  WIFI WWAN-HW  WWAN
  enabled  enabled  enabled  enabled 

  Tested on 201409-15490 Dell Latitude E5550 with Xenial dailylive
  (4.3.0-5-generic #16), network-manager version: 1.0.4-0ubuntu7

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1531419/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531462] [NEW] package accountsservice 0.6.37-1ubuntu10.1 failed to install/upgrade: le sous-processus nouveau script pre-removal a retourné une erreur de sortie d'état 1

2016-01-06 Thread piotr58
Public bug reported:

on a Guest ubuntu VM, during an upgrade from 15.04 to 15.10 with "do-
realese-upgrade" command.

My configuration :
- iMac 27" Late 2012 - 3.4 GHz Intel Core i7 - 32 Gb RAM
- Mac OS X 10.11.2 "El Capitan"
- VMware Fusion 8.1.0 (3272237)
- VM Ubuntu with 3072 Mo RAM - 1 core

ProblemType: Package
DistroRelease: Ubuntu 15.10
Package: accountsservice 0.6.37-1ubuntu10.1
ProcVersionSignature: Ubuntu 3.19.0-43.49-generic 3.19.8-ckt10
Uname: Linux 3.19.0-43-generic x86_64
ApportVersion: 2.17.2-0ubuntu1.8
Architecture: amd64
Date: Wed Jan  6 11:14:10 2016
DuplicateSignature: package:accountsservice:0.6.37-1ubuntu10.1:le 
sous-processus nouveau script pre-removal a retourné une erreur de sortie 
d'état 1
ErrorMessage: le sous-processus nouveau script pre-removal a retourné une 
erreur de sortie d'état 1
InstallationDate: Installed on 2013-01-27 (1073 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
RelatedPackageVersions:
 dpkg 1.17.25ubuntu1.1
 apt  1.0.10.2ubuntu1
SourcePackage: accountsservice
Title: package accountsservice 0.6.37-1ubuntu10.1 failed to install/upgrade: le 
sous-processus nouveau script pre-removal a retourné une erreur de sortie 
d'état 1
UpgradeStatus: Upgraded to wily on 2016-01-06 (0 days ago)

** Affects: accountsservice (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package need-duplicate-check third-party-packages wily

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to accountsservice in Ubuntu.
https://bugs.launchpad.net/bugs/1531462

Title:
  package accountsservice 0.6.37-1ubuntu10.1 failed to install/upgrade:
  le sous-processus nouveau script pre-removal a retourné une erreur de
  sortie d'état 1

Status in accountsservice package in Ubuntu:
  New

Bug description:
  on a Guest ubuntu VM, during an upgrade from 15.04 to 15.10 with "do-
  realese-upgrade" command.

  My configuration :
  - iMac 27" Late 2012 - 3.4 GHz Intel Core i7 - 32 Gb RAM
  - Mac OS X 10.11.2 "El Capitan"
  - VMware Fusion 8.1.0 (3272237)
  - VM Ubuntu with 3072 Mo RAM - 1 core

  ProblemType: Package
  DistroRelease: Ubuntu 15.10
  Package: accountsservice 0.6.37-1ubuntu10.1
  ProcVersionSignature: Ubuntu 3.19.0-43.49-generic 3.19.8-ckt10
  Uname: Linux 3.19.0-43-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.8
  Architecture: amd64
  Date: Wed Jan  6 11:14:10 2016
  DuplicateSignature: package:accountsservice:0.6.37-1ubuntu10.1:le 
sous-processus nouveau script pre-removal a retourné une erreur de sortie 
d'état 1
  ErrorMessage: le sous-processus nouveau script pre-removal a retourné une 
erreur de sortie d'état 1
  InstallationDate: Installed on 2013-01-27 (1073 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  RelatedPackageVersions:
   dpkg 1.17.25ubuntu1.1
   apt  1.0.10.2ubuntu1
  SourcePackage: accountsservice
  Title: package accountsservice 0.6.37-1ubuntu10.1 failed to install/upgrade: 
le sous-processus nouveau script pre-removal a retourné une erreur de sortie 
d'état 1
  UpgradeStatus: Upgraded to wily on 2016-01-06 (0 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/accountsservice/+bug/1531462/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1522316] Re: Icons are too big

2016-01-06 Thread Silvio Bierman
What is the status of this bug? The current 16.04 still has huge desktop
icons and no way to make them smaller. The Nautilus icon size options
are also way too limited. The smallest setting is too small and both
larger settings are too big for list mode.

Reducing the options to three sizes is a big mistake IMHO. Where we used
to have slowly increasing resolutions on computer screens the high res
screens today are twice the resolution of main stream screens. If
anything we need more options than before. Unity allows pixel sizes for
the launcher icons and Nautilus chooses to dumb down.

Together with the unfortunate choice of making Nautilus another horrible
CSD window desktop usability has taken a huge plunge in 16.04.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1522316

Title:
  Icons are too big

Status in Nautilus:
  Incomplete
Status in nautilus package in Ubuntu:
  Triaged
Status in ubuntu-settings package in Ubuntu:
  Fix Released

Bug description:
  On xenial the icons in nautilus (also on the Desktop) are too big.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: nautilus 1:3.18.2-1ubuntu1
  ProcVersionSignature: Ubuntu 4.2.0-19.23-generic 4.2.6
  Uname: Linux 4.2.0-19-generic x86_64
  ApportVersion: 2.19.2-0ubuntu8
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Thu Dec  3 09:37:55 2015
  GsettingsChanges:
   b'org.gnome.nautilus.list-view' b'default-visible-columns' b"['name', 
'size', 'type', 'date_modified']"
   b'org.gnome.nautilus.list-view' b'default-column-order' b"['name', 'size', 
'type', 'date_modified', 'owner', 'group', 'permissions', 'mime_type', 'where']"
  InstallationDate: Installed on 2015-04-30 (216 days ago)
  InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422)
  SourcePackage: nautilus
  SystemImageInfo: Error: command ['system-image-cli', '-i'] failed with exit 
code 2:
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/nautilus/+bug/1522316/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1285044] Re: every times browser showing untrusted connection, why/

2016-01-06 Thread DiagonalArg
Just going by the title, I am similarly effected.  This is a new install
of 15.10, (Gnome).  I can access sites fine from other machines on the
LAN, but my new install tells me that all connections are untrusted.  I
have also installed chromium browser and I have the same problem.  For
both, if I allow the exception, I can get through fine.  (Though not to
google.com which doesn't allow security exceptions, apparently.)  I have
checked /etc/ssl/certs, and all looks fine.  (There is, at least, a long
list of certs there.)

So, this is not a firefox issue.  It's something deeper.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1285044

Title:
  every  times browser showing untrusted connection,why/

Status in Ubuntu:
  Confirmed

Bug description:
  I cant access email in my laptop.secure cloud destop is not connected
  internet.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: firefox 13.0.1+build1-0ubuntu0.12.04.1
  ProcVersionSignature: Ubuntu 3.2.0-26.41-generic-pae 3.2.19
  Uname: Linux 3.2.0-26-generic-pae i686
  AddonCompatCheckDisabled: False
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu8
  Architecture: i386
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: VT1705 Analog [VT1705 Analog]
 Subdevices: 2/2
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
  AudioDevicesInUse:
   Cannot open /proc/net/unix: Permission denied
USERPID ACCESS COMMAND
   /dev/snd/controlC0:  guest-gvEs9b   2579 F pulseaudio
  BuildID: 20120615064004
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0x4030 irq 45'
 Mixer name : 'VIA VT1705'
 Components : 'HDA:11064397,1106,0010'
 Controls  : 26
 Simple ctrls  : 16
  Channel: release
  Date: Sat Jun 30 14:23:53 2012
  ForcedLayersAccel: False
  IfupdownConfig:
   auto lo
   iface lo inet loopback
  InstallationMedia: Custom 12.04 - Release i386
  IpRoute:
   default via 192.168.42.129 dev usb0  proto static 
   10.149.192.0/24 dev pan1  proto kernel  scope link  src 10.149.192.1 
   169.254.0.0/16 dev usb0  scope link  metric 1000 
   192.168.42.0/24 dev usb0  proto kernel  scope link  src 192.168.42.136  
metric 1
  IwConfig:
   lono wireless extensions.
   
   pan1  no wireless extensions.
   
   usb0  no wireless extensions.
  Profiles: Profile0 (Default) - LastVersion=13.0.1/20120615064004 (In use)
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  RunningIncompatibleAddons: False
  SourcePackage: firefox
  UpgradeStatus: No upgrade log present (probably fresh install)
  WifiSyslog:
   
  dmi.bios.date: 04/03/2013
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: CDVW316W[2013/04/03] X64
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Cedar Rock
  dmi.board.vendor: Intel Corporation
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: Intel Corporation
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvrCDVW316W[2013/04/03]X64:bd04/03/2013:svnIntelCorporation:pnCedarTrailPlatform:pvr0.1:rvnIntelCorporation:rnCedarRock:rvrFAB1:cvnIntelCorporation:ct9:cvr0.1:
  dmi.product.name: CedarTrail Platform
  dmi.product.version: 0.1
  dmi.sys.vendor: Intel Corporation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1285044/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1285044] Re: every times browser showing untrusted connection, why/

2016-01-06 Thread DiagonalArg
This is not a firefox problem.  Chromium also suffers, even though with
exceptions getting through to the internet is fine.  On my new install
ssl certs do appear to be present.

** Package changed: firefox (Ubuntu) => ubuntu

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1285044

Title:
  every  times browser showing untrusted connection,why/

Status in Ubuntu:
  Confirmed

Bug description:
  I cant access email in my laptop.secure cloud destop is not connected
  internet.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: firefox 13.0.1+build1-0ubuntu0.12.04.1
  ProcVersionSignature: Ubuntu 3.2.0-26.41-generic-pae 3.2.19
  Uname: Linux 3.2.0-26-generic-pae i686
  AddonCompatCheckDisabled: False
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu8
  Architecture: i386
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: VT1705 Analog [VT1705 Analog]
 Subdevices: 2/2
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
  AudioDevicesInUse:
   Cannot open /proc/net/unix: Permission denied
USERPID ACCESS COMMAND
   /dev/snd/controlC0:  guest-gvEs9b   2579 F pulseaudio
  BuildID: 20120615064004
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0x4030 irq 45'
 Mixer name : 'VIA VT1705'
 Components : 'HDA:11064397,1106,0010'
 Controls  : 26
 Simple ctrls  : 16
  Channel: release
  Date: Sat Jun 30 14:23:53 2012
  ForcedLayersAccel: False
  IfupdownConfig:
   auto lo
   iface lo inet loopback
  InstallationMedia: Custom 12.04 - Release i386
  IpRoute:
   default via 192.168.42.129 dev usb0  proto static 
   10.149.192.0/24 dev pan1  proto kernel  scope link  src 10.149.192.1 
   169.254.0.0/16 dev usb0  scope link  metric 1000 
   192.168.42.0/24 dev usb0  proto kernel  scope link  src 192.168.42.136  
metric 1
  IwConfig:
   lono wireless extensions.
   
   pan1  no wireless extensions.
   
   usb0  no wireless extensions.
  Profiles: Profile0 (Default) - LastVersion=13.0.1/20120615064004 (In use)
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  RunningIncompatibleAddons: False
  SourcePackage: firefox
  UpgradeStatus: No upgrade log present (probably fresh install)
  WifiSyslog:
   
  dmi.bios.date: 04/03/2013
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: CDVW316W[2013/04/03] X64
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Cedar Rock
  dmi.board.vendor: Intel Corporation
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: Intel Corporation
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvrCDVW316W[2013/04/03]X64:bd04/03/2013:svnIntelCorporation:pnCedarTrailPlatform:pvr0.1:rvnIntelCorporation:rnCedarRock:rvrFAB1:cvnIntelCorporation:ct9:cvr0.1:
  dmi.product.name: CedarTrail Platform
  dmi.product.version: 0.1
  dmi.sys.vendor: Intel Corporation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1285044/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1285044] Re: every times browser showing untrusted connection, why/

2016-01-06 Thread Launchpad Bug Tracker
Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: firefox (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1285044

Title:
  every  times browser showing untrusted connection,why/

Status in firefox package in Ubuntu:
  Confirmed

Bug description:
  I cant access email in my laptop.secure cloud destop is not connected
  internet.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: firefox 13.0.1+build1-0ubuntu0.12.04.1
  ProcVersionSignature: Ubuntu 3.2.0-26.41-generic-pae 3.2.19
  Uname: Linux 3.2.0-26-generic-pae i686
  AddonCompatCheckDisabled: False
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 2.0.1-0ubuntu8
  Architecture: i386
  ArecordDevices:
    List of CAPTURE Hardware Devices 
   card 0: Intel [HDA Intel], device 0: VT1705 Analog [VT1705 Analog]
 Subdevices: 2/2
 Subdevice #0: subdevice #0
 Subdevice #1: subdevice #1
  AudioDevicesInUse:
   Cannot open /proc/net/unix: Permission denied
USERPID ACCESS COMMAND
   /dev/snd/controlC0:  guest-gvEs9b   2579 F pulseaudio
  BuildID: 20120615064004
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0x4030 irq 45'
 Mixer name : 'VIA VT1705'
 Components : 'HDA:11064397,1106,0010'
 Controls  : 26
 Simple ctrls  : 16
  Channel: release
  Date: Sat Jun 30 14:23:53 2012
  ForcedLayersAccel: False
  IfupdownConfig:
   auto lo
   iface lo inet loopback
  InstallationMedia: Custom 12.04 - Release i386
  IpRoute:
   default via 192.168.42.129 dev usb0  proto static 
   10.149.192.0/24 dev pan1  proto kernel  scope link  src 10.149.192.1 
   169.254.0.0/16 dev usb0  scope link  metric 1000 
   192.168.42.0/24 dev usb0  proto kernel  scope link  src 192.168.42.136  
metric 1
  IwConfig:
   lono wireless extensions.
   
   pan1  no wireless extensions.
   
   usb0  no wireless extensions.
  Profiles: Profile0 (Default) - LastVersion=13.0.1/20120615064004 (In use)
  RfKill:
   0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
  RunningIncompatibleAddons: False
  SourcePackage: firefox
  UpgradeStatus: No upgrade log present (probably fresh install)
  WifiSyslog:
   
  dmi.bios.date: 04/03/2013
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: CDVW316W[2013/04/03] X64
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: Cedar Rock
  dmi.board.vendor: Intel Corporation
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: Intel Corporation
  dmi.chassis.version: 0.1
  dmi.modalias: 
dmi:bvnPhoenixTechnologiesLtd.:bvrCDVW316W[2013/04/03]X64:bd04/03/2013:svnIntelCorporation:pnCedarTrailPlatform:pvr0.1:rvnIntelCorporation:rnCedarRock:rvrFAB1:cvnIntelCorporation:ct9:cvr0.1:
  dmi.product.name: CedarTrail Platform
  dmi.product.version: 0.1
  dmi.sys.vendor: Intel Corporation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1285044/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531439] [NEW] Freeze after kernel upgrade to 4.0.23

2016-01-06 Thread Ales
Public bug reported:

After the recent kernel upgrade 2.4.0-23 the computer freezes (see the
screenshot) and I'm not able to login neither into a graphic mode nor
the text console.

When I try previous kernel 4.2.0-22 the result is the same even if it
worked before.

When I go to the recovery mode (Grub menu > Advanced options > Linux
4.2.0-23-generic (recovery mode)) and just select "Resume normal boot"
it boots as normal and I can login into KDE. But I guess it is in some
non accelerated graphics mode.

* Kubuntu 15.10, uname: 4.2.0-23-generic #28-Ubuntu SMP Sun Dec 27 17:47:31 UTC 
2015 x86_64 x86_64 x86_64 GNU/Linux.
* AMD Radeon R5 M255, using fglrx-updates

ProblemType: Bug
DistroRelease: Ubuntu 15.10
Package: xorg 1:7.7+7ubuntu4
ProcVersionSignature: Ubuntu 4.2.0-23.28-generic 4.2.6
Uname: Linux 4.2.0-23-generic x86_64
NonfreeKernelModules: fglrx
ApportVersion: 2.19.1-0ubuntu5
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: None
CurrentDesktop: KDE
Date: Wed Jan  6 09:59:24 2016
DistUpgraded: Fresh install
DistroCodename: wily
DistroVariant: kubuntu
DkmsStatus:
 fglrx-updates-core, 15.201, 4.2.0-19-generic, x86_64: installed
 fglrx-updates-core, 15.201, 4.2.0-21-generic, x86_64: installed
 fglrx-updates-core, 15.201, 4.2.0-22-generic, x86_64: installed
 fglrx-updates-core, 15.201, 4.2.0-23-generic, x86_64: installed
ExtraDebuggingInterest: I just need to know a workaround
GraphicsCard:
 Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 
0b) (prog-if 00 [VGA controller])
   Subsystem: Hewlett-Packard Company Device [103c:2248]
   Subsystem: Hewlett-Packard Company Device [103c:224a]
InstallationDate: Installed on 2015-10-23 (74 days ago)
InstallationMedia: Kubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
MachineType: Hewlett-Packard HP ProBook 450 G2
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-23-generic 
root=UUID=c9e0c6ee-c8a4-4d1a-a46e-a3b79c38f774 ro recovery nomodeset
Renderer: Software
SourcePackage: xorg
UdevLog: Error: [Errno 2] Adresář nebo soubor neexistuje: '/var/log/udev'
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 09/20/2014
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: M74 Ver. 01.05
dmi.board.name: 2248
dmi.board.vendor: Hewlett-Packard
dmi.board.version: KBC Version 67.22
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: 
dmi:bvnHewlett-Packard:bvrM74Ver.01.05:bd09/20/2014:svnHewlett-Packard:pnHPProBook450G2:pvrA3008CD10003:rvnHewlett-Packard:rn2248:rvrKBCVersion67.22:cvnHewlett-Packard:ct10:cvr:
dmi.product.name: HP ProBook 450 G2
dmi.product.version: A3008CD10003
dmi.sys.vendor: Hewlett-Packard
version.compiz: compiz N/A
version.fglrx-installer: fglrx-installer N/A
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.64-1
version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.2-1ubuntu4
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.2-1ubuntu4
version.xserver-xorg-core: xserver-xorg-core 2:1.17.2-1ubuntu9.1
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1
version.xserver-xorg-video-ati: xserver-xorg-video-ati 
1:7.5.0+git20150819-0ubuntu1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20150808-0ubuntu4
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu3
xserver.bootTime: Wed Jan  6 09:49:37 2016
xserver.configfile: default
xserver.logfile: /var/log/Xorg.0.log
xserver.version: 2:1.17.2-1ubuntu9.1

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug kubuntu wily

** Attachment added: "screenshot: this is on screen when the computer freezes"
   
https://bugs.launchpad.net/bugs/1531439/+attachment/4544821/+files/screenshot-stuck-after-kernel-upgrade.png

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1531439

Title:
  Freeze after kernel upgrade to 4.0.23

Status in xorg package in Ubuntu:
  New

Bug description:
  After the recent kernel upgrade 2.4.0-23 the computer freezes (see the
  screenshot) and I'm not able to login neither into a graphic mode nor
  the text console.

  When I try previous kernel 4.2.0-22 the result is the same even if it
  worked before.

  When I go to the recovery mode (Grub menu > Advanced options > Linux
  4.2.0-23-generic (recovery mode)) and just select "Resume normal boot"
  it boots as normal and I can login into KDE. But I guess it is in some
  non accelerated graphics mode.

  * Kubuntu 15.10, uname: 4.2.0-23-generic #28-Ubuntu SMP Sun Dec 27 17:47:31 
UTC 2015 x86_64 x86_64 x86_64 GNU/Linux.
  * AMD Radeon R5 M255, using fglrx-updates

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: xorg 1:7.7+7ubuntu4
  ProcVersionSignature: Ubuntu 4.2.0-23.28-generic 4

[Desktop-packages] [Bug 1531432] [NEW] package libunity-control-center1 14.04.3+14.04.20150916-0ubuntu1 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it

2016-01-06 Thread Luis Querol
Public bug reported:

It was impossible to install this package

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: libunity-control-center1 14.04.3+14.04.20150916-0ubuntu1
ProcVersionSignature: Ubuntu 3.13.0-74.118-generic 3.13.11-ckt30
Uname: Linux 3.13.0-74-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.19
Architecture: amd64
Date: Tue Jan  5 00:20:28 2016
DuplicateSignature: 
package:libunity-control-center1:14.04.3+14.04.20150916-0ubuntu1:package is in 
a very bad inconsistent state; you should  reinstall it before attempting 
configuration
ErrorMessage: package is in a very bad inconsistent state; you should  
reinstall it before attempting configuration
InstallationDate: Installed on 2015-01-24 (346 days ago)
InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2)
RelatedPackageVersions:
 dpkg 1.17.5ubuntu5.5
 apt  1.0.1ubuntu2.10
SourcePackage: unity-control-center
Title: package libunity-control-center1 14.04.3+14.04.20150916-0ubuntu1 failed 
to install/upgrade: package is in a very bad inconsistent state; you should  
reinstall it before attempting configuration
UpgradeStatus: No upgrade log present (probably fresh install)
usr_lib_unity-control-center: deja-dup 30.0-0ubuntu4

** Affects: unity-control-center (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package need-duplicate-check trusty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to unity-control-center in Ubuntu.
https://bugs.launchpad.net/bugs/1531432

Title:
  package libunity-control-center1 14.04.3+14.04.20150916-0ubuntu1
  failed to install/upgrade: package is in a very bad inconsistent
  state; you should  reinstall it before attempting configuration

Status in unity-control-center package in Ubuntu:
  New

Bug description:
  It was impossible to install this package

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: libunity-control-center1 14.04.3+14.04.20150916-0ubuntu1
  ProcVersionSignature: Ubuntu 3.13.0-74.118-generic 3.13.11-ckt30
  Uname: Linux 3.13.0-74-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  Date: Tue Jan  5 00:20:28 2016
  DuplicateSignature: 
package:libunity-control-center1:14.04.3+14.04.20150916-0ubuntu1:package is in 
a very bad inconsistent state; you should  reinstall it before attempting 
configuration
  ErrorMessage: package is in a very bad inconsistent state; you should  
reinstall it before attempting configuration
  InstallationDate: Installed on 2015-01-24 (346 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 
(20140722.2)
  RelatedPackageVersions:
   dpkg 1.17.5ubuntu5.5
   apt  1.0.1ubuntu2.10
  SourcePackage: unity-control-center
  Title: package libunity-control-center1 14.04.3+14.04.20150916-0ubuntu1 
failed to install/upgrade: package is in a very bad inconsistent state; you 
should  reinstall it before attempting configuration
  UpgradeStatus: No upgrade log present (probably fresh install)
  usr_lib_unity-control-center: deja-dup 30.0-0ubuntu4

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-control-center/+bug/1531432/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 792085] Re: Automatic remount of safely removed drive

2016-01-06 Thread Almas
Same here 14.04 on Samsung Chronos 7 series notebook with intel chipset
and i5 cpu.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/792085

Title:
  Automatic remount of safely removed drive

Status in nautilus package in Ubuntu:
  Confirmed
Status in thunar package in Ubuntu:
  Confirmed
Status in udev package in Ubuntu:
  Confirmed

Bug description:
  Binary package hint: nautilus

  When I choose "Safely remove drive" context menu entry for an external
  USB drive within a nautilus window or directly clicking on the desktop
  icon, after about 10 seconds the drive is automatically remounted and
  a Nautilus window showing the root folder opens.

  I have noticed that similar already happened with a very old Ubuntu
  version - Bug #110589 and as that is so long time ago I thought it is
  better to open a new bug. Reason of the problem might even be
  completely different.

  ProblemType: Bug
  DistroRelease: Ubuntu 11.04
  Package: nautilus 1:2.32.2.1-0ubuntu13
  ProcVersionSignature: Ubuntu 2.6.38-8.42-generic-pae 2.6.38.2
  Uname: Linux 2.6.38-8-generic-pae i686
  Architecture: i386
  Date: Thu Jun  2 23:40:08 2011
  InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1)
  ProcEnviron:
   LANGUAGE=en_US:en
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: nautilus
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/792085/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531422] Re: i915 underrun errors causing screen blanking

2016-01-06 Thread Trent Lloyd
extra dmesg log as more errors occurred.


** Attachment added: "dmesg"
   
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531422/+attachment/4544813/+files/dmesg.txt

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1531422

Title:
  i915 underrun errors causing screen blanking

Status in xorg package in Ubuntu:
  New

Bug description:
  I am having issues with my displays blanking out and coming back after
  2 seconds, quite often.. sometimes a few times in 10 seconds sometimes
  once a minute.  I only just started using the Intel graphics today,
  instead of previously using a radeon card.

  My setup is 1xDVI + 1x Displayport, with a powered mulitlink adaptor
  to then connect 2 displays.  Only the displayport displays blank out.

  Similar errors to reported in #1451632 -- I am running xenial up to
  date as of today, 4.3.0-5-generic.

  These errors keep appearing, but lots of other stuff is also
  appearing.  A bunch more occurred since I ran ubuntu-bug to generate
  all the xorg data, so i'll attach an extra dmesg log.

  [ 4143.345679] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* 
uncleared fifo underrun on pipe C
  [ 4143.345688] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU 
pipe C FIFO underrun

  
  Did not happen first at boot, but once it started didn't stop happening.  Was 
playing video at the time but pausing it didn't seem to stop it.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+12ubuntu1
  ProcVersionSignature: Ubuntu 4.3.0-5.16-generic 4.3.3
  Uname: Linux 4.3.0-5-generic x86_64
  .tmp.unity.support.test.0:
   
  ApportVersion: 2.19.3-0ubuntu2
  Architecture: amd64
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  CurrentDesktop: Unity
  Date: Wed Jan  6 16:01:45 2016
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes, including running git bisection searches
  GraphicsCard:
   Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics 
Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])
 Subsystem: Gigabyte Technology Co., Ltd Device [1458:d000]
  InstallationDate: Installed on 2015-11-13 (53 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  MachineType: Gigabyte Technology Co., Ltd. Z97X-Gaming G1 WIFI-BK
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.3.0-5-generic.efi.signed 
root=UUID=79f3ac61-fbba-43f5-ae15-30b248bad5fe ro rootflags=subvol=@ quiet 
splash crashkernel=384M-:128M vt.handoff=7
  SourcePackage: xorg
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/21/2015
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: F7
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: Z97X-Gaming G1 WIFI-BK
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrF7:bd04/21/2015:svnGigabyteTechnologyCo.,Ltd.:pnZ97X-GamingG1WIFI-BK:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnZ97X-GamingG1WIFI-BK:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: Z97X-Gaming G1 WIFI-BK
  dmi.product.version: To be filled by O.E.M.
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.
  version.compiz: compiz 1:0.9.12.2+16.04.20151211-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.65-3
  version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.7-1ubuntu1
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.7-1ubuntu1
  version.xserver-xorg-core: xserver-xorg-core 2:1.17.3-2ubuntu2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.6.1-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20151217-1~exp1ubuntu1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.11-1ubuntu3
  xserver.bootTime: Wed Jan  6 14:57:22 2016
  xserver.configfile: default
  xserver.errors: systemd-logind: failed to get session: PID 1561 does not 
belong to any known session
  xserver.logfile: /var/log/Xorg.0.log
  xserver.outputs:
   
  xserver.version: 2:1.17.3-2ubuntu2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1531422/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-pac

[Desktop-packages] [Bug 1531422] [NEW] i915 underrun errors causing screen blanking

2016-01-06 Thread Trent Lloyd
Public bug reported:

I am having issues with my displays blanking out and coming back after 2
seconds, quite often.. sometimes a few times in 10 seconds sometimes
once a minute.  I only just started using the Intel graphics today,
instead of previously using a radeon card.

My setup is 1xDVI + 1x Displayport, with a powered mulitlink adaptor to
then connect 2 displays.  Only the displayport displays blank out.

Similar errors to reported in #1451632 -- I am running xenial up to date
as of today, 4.3.0-5-generic.

These errors keep appearing, but lots of other stuff is also appearing.
A bunch more occurred since I ran ubuntu-bug to generate all the xorg
data, so i'll attach an extra dmesg log.

[ 4143.345679] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* 
uncleared fifo underrun on pipe C
[ 4143.345688] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU 
pipe C FIFO underrun


Did not happen first at boot, but once it started didn't stop happening.  Was 
playing video at the time but pausing it didn't seem to stop it.

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg 1:7.7+12ubuntu1
ProcVersionSignature: Ubuntu 4.3.0-5.16-generic 4.3.3
Uname: Linux 4.3.0-5-generic x86_64
.tmp.unity.support.test.0:
 
ApportVersion: 2.19.3-0ubuntu2
Architecture: amd64
CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
CurrentDesktop: Unity
Date: Wed Jan  6 16:01:45 2016
DistUpgraded: Fresh install
DistroCodename: xenial
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes, including running git bisection searches
GraphicsCard:
 Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics 
Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])
   Subsystem: Gigabyte Technology Co., Ltd Device [1458:d000]
InstallationDate: Installed on 2015-11-13 (53 days ago)
InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
MachineType: Gigabyte Technology Co., Ltd. Z97X-Gaming G1 WIFI-BK
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.3.0-5-generic.efi.signed 
root=UUID=79f3ac61-fbba-43f5-ae15-30b248bad5fe ro rootflags=subvol=@ quiet 
splash crashkernel=384M-:128M vt.handoff=7
SourcePackage: xorg
UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/21/2015
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: F7
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: Z97X-Gaming G1 WIFI-BK
dmi.board.vendor: Gigabyte Technology Co., Ltd.
dmi.board.version: x.x
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrF7:bd04/21/2015:svnGigabyteTechnologyCo.,Ltd.:pnZ97X-GamingG1WIFI-BK:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnZ97X-GamingG1WIFI-BK:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.name: Z97X-Gaming G1 WIFI-BK
dmi.product.version: To be filled by O.E.M.
dmi.sys.vendor: Gigabyte Technology Co., Ltd.
version.compiz: compiz 1:0.9.12.2+16.04.20151211-0ubuntu1
version.ia32-libs: ia32-libs N/A
version.libdrm2: libdrm2 2.4.65-3
version.libgl1-mesa-dri: libgl1-mesa-dri 11.0.7-1ubuntu1
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 11.0.7-1ubuntu1
version.xserver-xorg-core: xserver-xorg-core 2:1.17.3-2ubuntu2
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.2-1ubuntu1
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.6.1-1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20151217-1~exp1ubuntu1
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu3
xserver.bootTime: Wed Jan  6 14:57:22 2016
xserver.configfile: default
xserver.errors: systemd-logind: failed to get session: PID 1561 does not belong 
to any known session
xserver.logfile: /var/log/Xorg.0.log
xserver.outputs:
 
xserver.version: 2:1.17.3-2ubuntu2

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug compiz-0.9 ubuntu xenial

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1531422

Title:
  i915 underrun errors causing screen blanking

Status in xorg package in Ubuntu:
  New

Bug description:
  I am having issues with my displays blanking out and coming back after
  2 seconds, quite often.. sometimes a few times in 10 seconds sometimes
  once a minute.  I only just started using the Intel graphics today,
  instead of previously using a radeon card.

  My setup is 1xDVI + 1x Displayport, with a powered mulitlink adaptor
  to then connect 2 displays.  Only the displayport 

[Desktop-packages] [Bug 1531419] Re: nmcli always report the presence of WWAN device

2016-01-06 Thread Po-Hsu Lin
** Attachment added: "lspci"
   
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1531419/+attachment/4544788/+files/lspci

** Bug watch added: GNOME Bug Tracker #760198
   https://bugzilla.gnome.org/show_bug.cgi?id=760198

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1531419

Title:
  nmcli always report the presence of WWAN device

Status in network-manager package in Ubuntu:
  New

Bug description:
  When running the following command on a system without any WWAN device:
  $ nmcli radio

  It still report that the WWAN is enabled, which is quite confusing.
  WIFI-HW  WIFI WWAN-HW  WWAN
  enabled  enabled  enabled  enabled 

  Tested on 201409-15490 Dell Latitude E5550 with Xenial dailylive
  (4.3.0-5-generic #16), network-manager version: 1.0.4-0ubuntu7

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1531419/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531419] Re: nmcli always report the presence of WWAN device

2016-01-06 Thread Po-Hsu Lin
Bug reported to Bugzilla:
https://bugzilla.gnome.org/show_bug.cgi?id=760198

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1531419

Title:
  nmcli always report the presence of WWAN device

Status in network-manager package in Ubuntu:
  New

Bug description:
  When running the following command on a system without any WWAN device:
  $ nmcli radio

  It still report that the WWAN is enabled, which is quite confusing.
  WIFI-HW  WIFI WWAN-HW  WWAN
  enabled  enabled  enabled  enabled 

  Tested on 201409-15490 Dell Latitude E5550 with Xenial dailylive
  (4.3.0-5-generic #16), network-manager version: 1.0.4-0ubuntu7

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1531419/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp


[Desktop-packages] [Bug 1531419] [NEW] nmcli always report the presence of WWAN device

2016-01-06 Thread Po-Hsu Lin
Public bug reported:

When running the following command on a system without any WWAN device:
$ nmcli radio

It still report that the WWAN is enabled, which is quite confusing.
WIFI-HW  WIFI WWAN-HW  WWAN
enabled  enabled  enabled  enabled 

Tested on 201409-15490 Dell Latitude E5550 with Xenial dailylive
(4.3.0-5-generic #16), network-manager version: 1.0.4-0ubuntu7

** Affects: network-manager (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: 201409-15490 taipei-lab

** Attachment added: "lsusb"
   https://bugs.launchpad.net/bugs/1531419/+attachment/4544787/+files/lsusb

** Tags added: 201409-15490 taipei-lab

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1531419

Title:
  nmcli always report the presence of WWAN device

Status in network-manager package in Ubuntu:
  New

Bug description:
  When running the following command on a system without any WWAN device:
  $ nmcli radio

  It still report that the WWAN is enabled, which is quite confusing.
  WIFI-HW  WIFI WWAN-HW  WWAN
  enabled  enabled  enabled  enabled 

  Tested on 201409-15490 Dell Latitude E5550 with Xenial dailylive
  (4.3.0-5-generic #16), network-manager version: 1.0.4-0ubuntu7

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1531419/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp