[Desktop-packages] [Bug 1717992] Re: Sound silently plays to "Dummy Output"

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: pulseaudio (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1717992

Title:
  Sound silently plays to "Dummy Output"

Status in linux package in Ubuntu:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  Since upgrade to 4.10.0-35-generic in Ubuntu 17.04, the sound card is
  detected, but pavucontrol has only "Dummy Output". Bar animation shows
  audio is playing, but no sound is heard. alsamixer is working fine,
  but audio still can't be heard. Configuration tab says "No cards
  available for configuration".

  $ lspci -v
  0:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21)
Subsystem: Dell Device 0781
Flags: bus master, fast devsel, latency 32, IRQ 283
Memory at d5328000 (64-bit, non-prefetchable) [size=16K]
Memory at d530 (64-bit, non-prefetchable) [size=64K]
Capabilities: 
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl

  # aplay -L
  default
  Playback/recording through the PulseAudio sound server
  null
  Discard all samples (playback) or generate zero samples (capture)
  pulse
  PulseAudio Sound Server
  sysdefault:CARD=PCH
  HDA Intel PCH, ALC3246 Analog
  Default Audio Device
  front:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  Front speakers
  surround21:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  2.1 Surround output to Front and Subwoofer speakers
  surround40:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  4.0 Surround output to Front and Rear speakers
  surround41:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  4.1 Surround output to Front, Rear and Subwoofer speakers
  surround50:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  5.0 Surround output to Front, Center and Rear speakers
  surround51:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  5.1 Surround output to Front, Center, Rear and Subwoofer speakers
  surround71:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
  hdmi:CARD=PCH,DEV=0
  HDA Intel PCH, HDMI 0
  HDMI Audio Output
  hdmi:CARD=PCH,DEV=1
  HDA Intel PCH, HDMI 1
  HDMI Audio Output
  hdmi:CARD=PCH,DEV=2
  HDA Intel PCH, HDMI 2
  HDMI Audio Output
  dmix:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  Direct sample mixing device
  dmix:CARD=PCH,DEV=3
  HDA Intel PCH, HDMI 0
  Direct sample mixing device
  dmix:CARD=PCH,DEV=7
  HDA Intel PCH, HDMI 1
  Direct sample mixing device
  dmix:CARD=PCH,DEV=8
  HDA Intel PCH, HDMI 2
  Direct sample mixing device
  dsnoop:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  Direct sample snooping device
  dsnoop:CARD=PCH,DEV=3
  HDA Intel PCH, HDMI 0
  Direct sample snooping device
  dsnoop:CARD=PCH,DEV=7
  HDA Intel PCH, HDMI 1
  Direct sample snooping device
  dsnoop:CARD=PCH,DEV=8
  HDA Intel PCH, HDMI 2
  Direct sample snooping device
  hw:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  Direct hardware device without any conversions
  hw:CARD=PCH,DEV=3
  HDA Intel PCH, HDMI 0
  Direct hardware device without any conversions
  hw:CARD=PCH,DEV=7
  HDA Intel PCH, HDMI 1
  Direct hardware device without any conversions
  hw:CARD=PCH,DEV=8
  HDA Intel PCH, HDMI 2
  Direct hardware device without any conversions
  plughw:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  Hardware device with all software conversions
  plughw:CARD=PCH,DEV=3
  HDA Intel PCH, HDMI 0
  Hardware device with all software conversions
  plughw:CARD=PCH,DEV=7
  HDA Intel PCH, HDMI 1
  Hardware device with all software conversions
  plughw:CARD=PCH,DEV=8
  HDA Intel PCH, HDMI 2
  Hardware device with all software conversions
  --- 
  ApportVersion: 2.20.4-0ubuntu4.5
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/dsp', 
'/dev/snd/by-path', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D8p', 
'/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', 
'/dev/snd/pcmC0D0p', '/dev/snd/controlC0', '/dev/snd/seq', '/dev/snd/timer'] 
failed with exit code 1:
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 17.04
  HibernationDevice: RESUME=UUID=0bcd17dc-d971-4048-8c1f-d2bb48e8a157
  InstallationDate: Installed on 2017-08-18 (31 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  MachineType: Dell Inc. Inspiron 7460
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.10.0-35-generic.efi.signed 
root=/dev/mapper/ubu-root 

[Desktop-packages] [Bug 1717992] Re: Sound silently plays to "Dummy Output"

[ereli]

my workaround is  running `pulseaudio -k` and restarting Spotify. Chrome
doesn't need a restart to play.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1717992

Title:
  Sound silently plays to "Dummy Output"

Status in linux package in Ubuntu:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  Since upgrade to 4.10.0-35-generic in Ubuntu 17.04, the sound card is
  detected, but pavucontrol has only "Dummy Output". Bar animation shows
  audio is playing, but no sound is heard. alsamixer is working fine,
  but audio still can't be heard. Configuration tab says "No cards
  available for configuration".

  $ lspci -v
  0:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21)
Subsystem: Dell Device 0781
Flags: bus master, fast devsel, latency 32, IRQ 283
Memory at d5328000 (64-bit, non-prefetchable) [size=16K]
Memory at d530 (64-bit, non-prefetchable) [size=64K]
Capabilities: 
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl

  # aplay -L
  default
  Playback/recording through the PulseAudio sound server
  null
  Discard all samples (playback) or generate zero samples (capture)
  pulse
  PulseAudio Sound Server
  sysdefault:CARD=PCH
  HDA Intel PCH, ALC3246 Analog
  Default Audio Device
  front:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  Front speakers
  surround21:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  2.1 Surround output to Front and Subwoofer speakers
  surround40:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  4.0 Surround output to Front and Rear speakers
  surround41:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  4.1 Surround output to Front, Rear and Subwoofer speakers
  surround50:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  5.0 Surround output to Front, Center and Rear speakers
  surround51:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  5.1 Surround output to Front, Center, Rear and Subwoofer speakers
  surround71:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
  hdmi:CARD=PCH,DEV=0
  HDA Intel PCH, HDMI 0
  HDMI Audio Output
  hdmi:CARD=PCH,DEV=1
  HDA Intel PCH, HDMI 1
  HDMI Audio Output
  hdmi:CARD=PCH,DEV=2
  HDA Intel PCH, HDMI 2
  HDMI Audio Output
  dmix:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  Direct sample mixing device
  dmix:CARD=PCH,DEV=3
  HDA Intel PCH, HDMI 0
  Direct sample mixing device
  dmix:CARD=PCH,DEV=7
  HDA Intel PCH, HDMI 1
  Direct sample mixing device
  dmix:CARD=PCH,DEV=8
  HDA Intel PCH, HDMI 2
  Direct sample mixing device
  dsnoop:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  Direct sample snooping device
  dsnoop:CARD=PCH,DEV=3
  HDA Intel PCH, HDMI 0
  Direct sample snooping device
  dsnoop:CARD=PCH,DEV=7
  HDA Intel PCH, HDMI 1
  Direct sample snooping device
  dsnoop:CARD=PCH,DEV=8
  HDA Intel PCH, HDMI 2
  Direct sample snooping device
  hw:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  Direct hardware device without any conversions
  hw:CARD=PCH,DEV=3
  HDA Intel PCH, HDMI 0
  Direct hardware device without any conversions
  hw:CARD=PCH,DEV=7
  HDA Intel PCH, HDMI 1
  Direct hardware device without any conversions
  hw:CARD=PCH,DEV=8
  HDA Intel PCH, HDMI 2
  Direct hardware device without any conversions
  plughw:CARD=PCH,DEV=0
  HDA Intel PCH, ALC3246 Analog
  Hardware device with all software conversions
  plughw:CARD=PCH,DEV=3
  HDA Intel PCH, HDMI 0
  Hardware device with all software conversions
  plughw:CARD=PCH,DEV=7
  HDA Intel PCH, HDMI 1
  Hardware device with all software conversions
  plughw:CARD=PCH,DEV=8
  HDA Intel PCH, HDMI 2
  Hardware device with all software conversions
  --- 
  ApportVersion: 2.20.4-0ubuntu4.5
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/dsp', 
'/dev/snd/by-path', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D8p', 
'/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D0c', 
'/dev/snd/pcmC0D0p', '/dev/snd/controlC0', '/dev/snd/seq', '/dev/snd/timer'] 
failed with exit code 1:
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 17.04
  HibernationDevice: RESUME=UUID=0bcd17dc-d971-4048-8c1f-d2bb48e8a157
  InstallationDate: Installed on 2017-08-18 (31 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  MachineType: Dell Inc. Inspiron 7460
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.10.0-35-generic.efi.signed 
root=/dev/mapper/ubu-root ro quiet splash zswap.enabled=1 

[Desktop-packages] [Bug 1706889] Re: package chromium-browser 59.0.3071.109-0ubuntu0.17.04.1360 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before

[Launchpad Bug Tracker]

[Expired for chromium-browser (Ubuntu) because there has been no
activity for 60 days.]

** Changed in: chromium-browser (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to chromium-browser in Ubuntu.
https://bugs.launchpad.net/bugs/1706889

Title:
  package chromium-browser 59.0.3071.109-0ubuntu0.17.04.1360 failed to
  install/upgrade: package is in a very bad inconsistent state; you
  should  reinstall it before attempting a removal

Status in chromium-browser package in Ubuntu:
  Expired

Bug description:
  Nothing really. Just get popups that the chromium browser is closing
  when I start it, so I reported this. Using the 17.04 and fully updated
  as on Thursday 27th July 2017.

  Thanks. Great OS, great tools. Will never use Windows anymore.

  ProblemType: Package
  DistroRelease: Ubuntu 17.04
  Package: chromium-browser 59.0.3071.109-0ubuntu0.17.04.1360
  ProcVersionSignature: Ubuntu 4.10.0-28.32-generic 4.10.17
  Uname: Linux 4.10.0-28-generic x86_64
  ApportVersion: 2.20.4-0ubuntu4.5
  AptOrdering:
   chromium-browser:amd64: Remove
   NULL: ConfigurePending
  Architecture: amd64
  DRM.card0-DP-1:
   enabled: disabled
   dpms: Off
   status: disconnected
   edid-base64: 
   modes:
  DRM.card0-HDMI-A-1:
   enabled: disabled
   dpms: Off
   status: disconnected
   edid-base64: 
   modes:
  DRM.card0-LVDS-1:
   enabled: enabled
   dpms: On
   status: connected
   edid-base64: 
AP///wAOFMcUAA8VAQOAIhN4Ck5NnldUkSYPUFQBAQEBAQEBAQEBAQEBAQEBeB1WwlAAJjA7JzYAWMIQAAAYeB1WwlAAJjA7JzYAWMIQAAAY/gBDUFQKICAgICAgICAgAABDTEFBMTU2V0IxMUEgANo=
   modes: 1366x768
  DRM.card0-VGA-1:
   enabled: disabled
   dpms: Off
   status: disconnected
   edid-base64: 
   modes:
  Date: Wed Jul 26 16:07:08 2017
  Desktop-Session:
   'None'
   'None'
   'None'
  DpkgTerminalLog:
   dpkg: error processing package chromium-browser (--remove):
package is in a very bad inconsistent state; you should
reinstall it before attempting a removal
  Env:
   'None'
   'None'
  ErrorMessage: package is in a very bad inconsistent state; you should  
reinstall it before attempting a removal
  InstallationDate: Installed on 2017-07-25 (1 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  InstalledPlugins:
   
  Load-Avg-1min: 4.96
  Load-Processes-Running-Percent:   0.4%
  Lsusb:
   Bus 002 Device 003: ID 090c:37b0 Silicon Motion, Inc. - Taiwan (formerly 
Feiya Technology Corp.) 
   Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
   Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Hewlett-Packard HP G62 Notebook PC
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic 
root=UUID=f03b9429-c787-4532-a66b-a145f1b1e393 ro quiet splash vt.handoff=7
  SourcePackage: chromium-browser
  Title: package chromium-browser 59.0.3071.109-0ubuntu0.17.04.1360 failed to 
install/upgrade: package is in a very bad inconsistent state; you should  
reinstall it before attempting a removal
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/10/2010
  dmi.bios.vendor: Hewlett-Packard
  dmi.bios.version: F.07
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 1425
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 54.13
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: N/A
  dmi.modalias: 
dmi:bvnHewlett-Packard:bvrF.07:bd02/10/2010:svnHewlett-Packard:pnHPG62NotebookPC:pvr049D102027102:rvnHewlett-Packard:rn1425:rvr54.13:cvnHewlett-Packard:ct10:cvrN/A:
  dmi.product.name: HP G62 Notebook PC
  dmi.product.version: 049D102027102
  dmi.sys.vendor: Hewlett-Packard
  modified.conffile..etc.default.chromium-browser: [deleted]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1706889/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1722044] Re: package chromium-browser 61.0.3163.100-0ubuntu0.16.04.1306 failed to install/upgrade: nelze zkopírovat rozbalená data „./usr/lib/chromium-browser/icudtl.dat“ do „/

[Launchpad Bug Tracker]

[Expired for chromium-browser (Ubuntu) because there has been no
activity for 60 days.]

** Changed in: chromium-browser (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to chromium-browser in Ubuntu.
https://bugs.launchpad.net/bugs/1722044

Title:
  package chromium-browser 61.0.3163.100-0ubuntu0.16.04.1306 failed to
  install/upgrade: nelze zkopírovat rozbalená data „./usr/lib/chromium-
  browser/icudtl.dat“ do „/usr/lib/chromium-browser/icudtl.dat.dpkg-
  new“: neočekávaný konec souboru nebo proudu

Status in chromium-browser package in Ubuntu:
  Expired

Bug description:
  It happened when I was trying to install chromium with sudo aptitude
  install chromium-browser-i10n chromium-browser

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: chromium-browser 61.0.3163.100-0ubuntu0.16.04.1306
  ProcVersionSignature: Ubuntu 4.10.0-28.32~16.04.2-generic 4.10.17
  Uname: Linux 4.10.0-28-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.10
  AptOrdering:
   chromium-browser: Install
   chromium-browser-l10n: Install
   chromium-browser: Configure
   chromium-browser-l10n: Configure
   NULL: ConfigurePending
  Architecture: amd64
  DRM.card0-DVI-D-1:
   enabled: enabled
   dpms: On
   status: connected
   edid-base64: 
AP///wAebWtW1rQAAAcRAQPqMSB46q7FoldKnCUSUFSna4CVAIGAgUBxTwEBAQEBAQEBfC6QoGAaHkAwIDYA2igRAAAaITmQMGIaJ0BosDYA2igRAAAc/QA4SxxTDwAKICAgICAg/ABMMjI2VyAKICAgICAgAM8=
   modes: 1680x1050 1680x1050 1280x1024 1280x1024 1440x900 1280x960 1152x864 
1024x768 1024x768 832x624 800x600 800x600 800x600 640x480 640x480 720x400
  DRM.card0-TV-1:
   enabled: disabled
   dpms: Off
   status: disconnected
   edid-base64: 
   modes:
  DRM.card0-VGA-1:
   enabled: disabled
   dpms: Off
   status: disconnected
   edid-base64: 
   modes:
  Date: Sun Oct  8 10:48:11 2017
  Desktop-Session:
   'None'
   'None'
   'None'
  Env:
   'None'
   'None'
  ErrorMessage: nelze zkopírovat rozbalená data 
„./usr/lib/chromium-browser/icudtl.dat“ do 
„/usr/lib/chromium-browser/icudtl.dat.dpkg-new“: neočekávaný konec souboru nebo 
proudu
  InstallationDate: Installed on 2017-10-08 (0 days ago)
  InstallationMedia: Lubuntu 16.04.3 LTS "Xenial Xerus" - Release amd64 
(20170801)
  Load-Avg-1min: 1.22
  Load-Processes-Running-Percent:   0.5%
  Lsusb:
   Bus 001 Device 003: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card 
Reader
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 002 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: System manufacturer System Product Name
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic 
root=UUID=eb9444ff-a658-42eb-ad86-fe6743d699fa ro quiet splash vt.handoff=7
  SourcePackage: chromium-browser
  Title: package chromium-browser 61.0.3163.100-0ubuntu0.16.04.1306 failed to 
install/upgrade: nelze zkopírovat rozbalená data 
„./usr/lib/chromium-browser/icudtl.dat“ do 
„/usr/lib/chromium-browser/icudtl.dat.dpkg-new“: neočekávaný konec souboru nebo 
proudu
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/02/2006
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: ASUS M2N8L ACPI BIOS Revision 0301
  dmi.board.name: M2N8L
  dmi.board.vendor: ASUSTek Computer INC.
  dmi.board.version: 1.xx
  dmi.chassis.asset.tag: 123456789000
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnPhoenixTechnologies,LTD:bvrASUSM2N8LACPIBIOSRevision0301:bd11/02/2006:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTekComputerINC.:rnM2N8L:rvr1.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer
  modified.conffile..etc.default.chromium-browser: [deleted]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1722044/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1728778] Re: Touchpad not working after resuming from suspend

[Launchpad Bug Tracker]

[Expired for gnome-shell (Ubuntu) because there has been no activity for
60 days.]

** Changed in: gnome-shell (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/1728778

Title:
  Touchpad not working after resuming from suspend

Status in gdm3 package in Ubuntu:
  Expired
Status in gnome-shell package in Ubuntu:
  Expired

Bug description:
  I am using ubuntu 17.10 (intel i3, 16gb ram ). my mouse doesn't works
  once I have suspended the pc when i close the lid and reopens it

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1728778/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1730091] Re: session freezes/hangs after undetermined amount of time

[Launchpad Bug Tracker]

[Expired for gnome-shell (Ubuntu) because there has been no activity for
60 days.]

** Changed in: gnome-shell (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/1730091

Title:
  session freezes/hangs after undetermined amount of time

Status in gnome-shell package in Ubuntu:
  Expired

Bug description:
  Currently using the default wayland session on 17.10: the computer
  eventually hangs/freezes after an undetermined amount of time, whether
  it'S still powered on and unused or when put on standby. Resuming the
  session is impossible as the device is frozen and needs to bee reset
  with power button.

  Critical bug as the issues has provoked major data loss and work in
  progress loss.

  Possibly a functional regression due to the use of wayland or the
  newer kernel provided with this release.

  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: gnome-shell 3.26.1-0ubuntu5
  ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
  Uname: Linux 4.13.0-16-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.1
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  Date: Sat Nov  4 12:29:03 2017
  DisplayManager: gdm3
  InstallationDate: Installed on 2017-10-20 (15 days ago)
  InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018)
  SourcePackage: gnome-shell
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1730091/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1728810] Re: CUPS ERRORS

[Launchpad Bug Tracker]

[Expired for cups (Ubuntu) because there has been no activity for 60
days.]

** Changed in: cups (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1728810

Title:
  CUPS ERRORS

Status in cups package in Ubuntu:
  Expired

Bug description:
  There are problems in my PC about the "Server".-When I am traying to
  use my printer (wireless printer).-An advice apairs as: "failed to
  connect to server".

  I would have your help,thank You in advance.Sincerely Fernando
  Espinosa.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: xorg 1:7.7+13ubuntu3
  ProcVersionSignature: Ubuntu 4.4.0-97.120-generic 4.4.87
  Uname: Linux 4.4.0-97-generic x86_64
  .tmp.unity_support_test.0:
   
  ApportVersion: 2.20.1-0ubuntu2.10
  Architecture: amd64
  BootLog:
   [  OK  ] Started Network Manager.
Starting Network Manager Wait Online...
   [  OK  ] Reached target Network.
   [  OK  ] Started Unattended Upgrades Shutdown.
  CompizPlugins: No value set for 
`/apps/compiz-1/general/screen0/options/active_plugins'
  CompositorRunning: compiz
  CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
  CompositorUnredirectFSW: true
  Date: Tue Oct 31 00:32:15 2017
  DistUpgraded: Fresh install
  DistroCodename: xenial
  DistroVariant: ubuntu
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 7310] [1002:9809] 
(prog-if 00 [VGA controller])
 Subsystem: Lenovo Wrestler [Radeon HD 7310] [17aa:365d]
  InstallationDate: Installed on 2016-11-27 (337 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  MachineType: LENOVO 10103
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-97-generic 
root=UUID=e9b7906b-8c2c-4887-89be-701551b926e7 ro quiet splash vt.handoff=7
  SourcePackage: xorg
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 03/05/2013
  dmi.bios.vendor: LENOVO
  dmi.bios.version: EKKT30BUS
  dmi.board.name: Remore CRB
  dmi.board.vendor: LENOVO
  dmi.board.version: Win8 STD EM DPK IPG
  dmi.chassis.type: 13
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnLENOVO:bvrEKKT30BUS:bd03/05/2013:svnLENOVO:pn10103:pvrLenovoC345:rvnLENOVO:rnRemoreCRB:rvrWin8STDEMDPKIPG:cvnToBeFilledByO.E.M.:ct13:cvrToBeFilledByO.E.M.:
  dmi.product.name: 10103
  dmi.product.version: Lenovo C345
  dmi.sys.vendor: LENOVO
  version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1
  version.ia32-libs: ia32-libs N/A
  version.libdrm2: libdrm2 2.4.76-1~ubuntu16.04.1
  version.libgl1-mesa-dri: libgl1-mesa-dri 17.0.7-0ubuntu0.16.04.2
  version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
  version.libgl1-mesa-glx: libgl1-mesa-glx 17.0.7-0ubuntu0.16.04.2
  version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.7
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20160325-1ubuntu1.2
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 
1:1.0.12-1build2
  xserver.bootTime: Mon Oct 30 16:40:55 2017
  xserver.configfile: default
  xserver.errors:
   
  xserver.logfile: /var/log/Xorg.0.log
  xserver.version: 2:1.18.4-0ubuntu0.7
  xserver.video_driver: radeon

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1728810/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1729441] Re: changing display mode after login terminates session

[Launchpad Bug Tracker]

[Expired for gnome-shell (Ubuntu) because there has been no activity for
60 days.]

** Changed in: gnome-shell (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/1729441

Title:
  changing display mode after login terminates session

Status in gnome-shell package in Ubuntu:
  Expired

Bug description:
  When I login, I type the password on the laptop screen. (Maybe it's
  important.) After a while, while I'm waiting to get logged in, Ubuntu
  changes the display mode. Both monitor goes black, laptop screen
  becomes the secondary and my external monitor becomes the primary
  display. Because of Ubuntu is unable to remember to the previously set
  display mode, I usually change it a bit after I have logged in.
  However, if I (would like to) do this too quickly, say... less than
  4-5 seconds after I can see my desktop, my session gets terminated and
  I'm returned to the login screen. You can repeat it indefinitely, it
  always worked for me.

  I thought it's because of one of my extensions but I could reproduce it after 
I have disabled them.
  I haven't found any useful log entries.

  
  UPDATE 1:
  While I was writing this, I thought it has something to do with theme loading 
or something like this, so I continued to test with startup applications.
  I just rarely managed to reproduce this bug when I didn't execute the 
following script (as a file) at login:
  ```
  #!/bin/bash
  sleep 1s; firefox &
  sleep 1s; thunderbird &
  ```

  I also noticed that after I have some faulty logins and then I login
  without changing display mode, I >sometimes< have no desktop, no
  startup applications and when I click power off/logout buttons nothing
  happens, but that's sure I will being logged out randomly in the near
  future - even if I don't touch my computer (I'm talking about
  minutes).

  Plus, I can see the desktop and the top bar (so it's the primary
  screen) with two wide black bars on the two sides of my laptop monitor
  for a moment before I get logged out. (However, I don't see any
  resolution changes so I guess it's not 640x480, or 800x600, etc.)

  
  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: gnome-shell 3.26.1-0ubuntu5
  ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
  Uname: Linux 4.13.0-16-generic x86_64
  NonfreeKernelModules: vtsspp sep4_1 socperf2_0 pax
  ApportVersion: 2.20.7-0ubuntu3.1
  Architecture: amd64
  CurrentDesktop: GNOME
  Date: Wed Nov  1 21:00:45 2017
  DisplayManager: gdm3
  InstallationDate: Installed on 2017-08-08 (85 days ago)
  InstallationMedia: Ubuntu-GNOME 17.04 "Zesty Zapus" - Release amd64 (20170412)
  SourcePackage: gnome-shell
  UpgradeStatus: Upgraded to artful on 2017-10-21 (10 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1729441/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1729028] Re: gnome-shell crashes when monitor sleeps or is turned off

[Launchpad Bug Tracker]

[Expired for gnome-shell (Ubuntu) because there has been no activity for
60 days.]

** Changed in: gnome-shell (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/1729028

Title:
  gnome-shell crashes when monitor sleeps or is turned off

Status in gnome-shell package in Ubuntu:
  Expired

Bug description:
  Gnome shell crashes reliably and only after a period of inactivity
  (15+ minutes). I have not seen it crash while using the desktop - even
  for hours at a time. I suspect it has something to do with locking the
  screen or turning off the monitor. However even after attempting to
  disable both lockscreen and blank screen it still happens.

  After a crash dmesg shows [ 3726.608957] gnome-shell[2666]: segfault
  at 38 ip 7fc6a7330c30 sp 7fff0d12fe78 error 4 in
  libmutter-1.so.0.0.0[7fc6a72de000+141000]

  When the crash happens it goes back to the login screen. Logging in
  works fine.

  It happens pretty reliably but will sometimes successfully lock and
  blank the screen. I would say it happens 90% of the time I leave the
  computer alone for awhile.

  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: gnome-shell 3.26.1-0ubuntu5
  ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
  Uname: Linux 4.13.0-16-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.1
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  Date: Tue Oct 31 11:34:11 2017
  DisplayManager: gdm3
  GsettingsChanges:
   b'org.gnome.shell' b'favorite-apps' b"['org.gnome.Nautilus.desktop', 
'google-chrome.desktop', 'firefox.desktop', 'code.desktop', 
'org.gnome.Terminal.desktop', 'libreoffice-writer.desktop', 
'libreoffice-calc.desktop', 'libreoffice-impress.desktop', 
'org.gnome.Software.desktop', 'gnome-control-center.desktop']"
   b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'"
   b'org.gnome.desktop.interface' b'clock-format' b"'12h'"
   b'org.gnome.desktop.interface' b'text-scaling-factor' b'1.25'
  InstallationDate: Installed on 2017-07-18 (105 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-shell
  UpgradeStatus: Upgraded to artful on 2017-10-18 (12 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1729028/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1730044] Re: nautilus-desktop crashed with signal 5 in _XReply()

[Launchpad Bug Tracker]

[Expired for nautilus (Ubuntu) because there has been no activity for 60
days.]

** Changed in: nautilus (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nautilus in Ubuntu.
https://bugs.launchpad.net/bugs/1730044

Title:
  nautilus-desktop crashed with signal 5 in _XReply()

Status in nautilus package in Ubuntu:
  Expired

Bug description:
  I dont know

  ProblemType: Crash
  DistroRelease: Ubuntu 17.10
  Package: nautilus 1:3.26.0-0ubuntu1
  ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
  Uname: Linux 4.13.0-16-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  Date: Sat Nov  4 02:46:53 2017
  ExecutablePath: /usr/bin/nautilus-desktop
  InstallationDate: Installed on 2017-10-22 (12 days ago)
  InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018)
  ProcCmdline: nautilus-desktop
  ProcEnviron:
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  Signal: 5
  SourcePackage: nautilus
  StacktraceTop:
   ?? () from /usr/lib/x86_64-linux-gnu/libX11.so.6
   ?? () from /usr/lib/x86_64-linux-gnu/libX11.so.6
   _XReply () from /usr/lib/x86_64-linux-gnu/libX11.so.6
   XIGetClientPointer () from /usr/lib/x86_64-linux-gnu/libXi.so.6
   ?? () from /usr/lib/x86_64-linux-gnu/libgdk-3.so.0
  Title: nautilus-desktop crashed with signal 5 in _XReply()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1730044/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1728778] Re: Touchpad not working after resuming from suspend

[Launchpad Bug Tracker]

[Expired for gdm3 (Ubuntu) because there has been no activity for 60
days.]

** Changed in: gdm3 (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/1728778

Title:
  Touchpad not working after resuming from suspend

Status in gdm3 package in Ubuntu:
  Expired
Status in gnome-shell package in Ubuntu:
  Expired

Bug description:
  I am using ubuntu 17.10 (intel i3, 16gb ram ). my mouse doesn't works
  once I have suspended the pc when i close the lid and reopens it

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1728778/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1730365] Re: pulseaudio keeps crashing and the audiom drops out

[Launchpad Bug Tracker]

[Expired for pulseaudio (Ubuntu) because there has been no activity for
60 days.]

** Changed in: pulseaudio (Ubuntu)
   Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1730365

Title:
  pulseaudio keeps crashing and the audiom drops out

Status in pulseaudio package in Ubuntu:
  Expired

Bug description:
  1). 21:48:17 ⌂197% grizzlysmit@killashandra:~ 4m23s $ lsb_release -rd
  Description:  Ubuntu 17.10
  Release:  17.10
  21:54:30 ⌂217% grizzlysmit@killashandra:~ 2s $ lsb_release -a
  No LSB modules are available.
  Distributor ID:   Ubuntu
  Description:  Ubuntu 17.10
  Release:  17.10
  Codename: artful

  2).  $ apt-cache policy pulseaudio
  pulseaudio:
Installed: 1:10.0-2ubuntu3
Candidate: 1:10.0-2ubuntu3
Version table:
   *** 1:10.0-2ubuntu3 500
  500 http://au.archive.ubuntu.com/ubuntu artful/main amd64 Packages
  100 /var/lib/dpkg/status

  3). I expected pulse to just keep running like it always did under
  previous releases of Ubuntu

  4). It keeps dropping out after a day or so no sound and settings
  (gnome-control-center sound) to it cannot connect to it running
  pulseaudio& in a shell fixes it

  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: pulseaudio 1:10.0-2ubuntu3
  ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
  Uname: Linux 4.13.0-16-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.1
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  Date: Mon Nov  6 21:44:08 2017
  InstallationDate: Installed on 2017-07-24 (104 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  SourcePackage: pulseaudio
  UpgradeStatus: Upgraded to artful on 2017-10-20 (16 days ago)
  dmi.bios.date: 08/06/2013
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A18
  dmi.board.name: 0G261D
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 15
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA18:bd08/06/2013:svnDellInc.:pnOptiPlex960:pvr:rvnDellInc.:rn0G261D:rvrA00:cvnDellInc.:ct15:cvr:
  dmi.product.name: OptiPlex 960
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1730365/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741591] [NEW] PCI/internal sound card not detected

[Freedomlover]

Public bug reported:

I have an HP 15-CC129TX Laptop with Intel Corporation Sunrise Point-LP
HD Audio. But Ubuntu 17.10 is not detecting my sound card and is
displaying dummy output in my sound settings.

ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: alsa-base 1.0.25+dfsg-0ubuntu5
ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13
Uname: Linux 4.13.0-21-generic x86_64
ApportVersion: 2.20.7-0ubuntu3.7
Architecture: amd64
CurrentDesktop: ubuntu:GNOME
Date: Sat Jan  6 09:07:37 2018
InstallationDate: Installed on 2018-01-05 (0 days ago)
InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018)
PackageArchitecture: all
SourcePackage: alsa-driver
Symptom: audio
Title: PCI/internal sound card not detected
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 08/25/2017
dmi.bios.vendor: Insyde
dmi.bios.version: F.22
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: 83F9
dmi.board.vendor: HP
dmi.board.version: 46.40
dmi.chassis.type: 10
dmi.chassis.vendor: HP
dmi.chassis.version: Chassis Version
dmi.modalias: 
dmi:bvnInsyde:bvrF.22:bd08/25/2017:svnHP:pnHPPavilionLaptop15-cc1xx:pvrType1ProductConfigId:rvnHP:rn83F9:rvr46.40:cvnHP:ct10:cvrChassisVersion:
dmi.product.family: 103C_5335KV HP Pavilion
dmi.product.name: HP Pavilion Laptop 15-cc1xx
dmi.product.version: Type1ProductConfigId
dmi.sys.vendor: HP

** Affects: alsa-driver (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug artful wayland-session

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1741591

Title:
  PCI/internal sound card not detected

Status in alsa-driver package in Ubuntu:
  New

Bug description:
  I have an HP 15-CC129TX Laptop with Intel Corporation Sunrise Point-LP
  HD Audio. But Ubuntu 17.10 is not detecting my sound card and is
  displaying dummy output in my sound settings.

  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13
  Uname: Linux 4.13.0-21-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.7
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  Date: Sat Jan  6 09:07:37 2018
  InstallationDate: Installed on 2018-01-05 (0 days ago)
  InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018)
  PackageArchitecture: all
  SourcePackage: alsa-driver
  Symptom: audio
  Title: PCI/internal sound card not detected
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 08/25/2017
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.22
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 83F9
  dmi.board.vendor: HP
  dmi.board.version: 46.40
  dmi.chassis.type: 10
  dmi.chassis.vendor: HP
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.22:bd08/25/2017:svnHP:pnHPPavilionLaptop15-cc1xx:pvrType1ProductConfigId:rvnHP:rn83F9:rvr46.40:cvnHP:ct10:cvrChassisVersion:
  dmi.product.family: 103C_5335KV HP Pavilion
  dmi.product.name: HP Pavilion Laptop 15-cc1xx
  dmi.product.version: Type1ProductConfigId
  dmi.sys.vendor: HP

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1741591/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741571] Re: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from oth

[dino99]

*** This bug is a duplicate of bug 1725928 ***
https://bugs.launchpad.net/bugs/1725928

** This bug has been marked a duplicate of bug 1725928
   package libsane1 1.0.27-1~experimental2ubuntu1: multiarch packages with 
differing files

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to sane-backends in Ubuntu.
https://bugs.launchpad.net/bugs/1741571

Title:
  package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to
  install/upgrade: trying to overwrite shared
  '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other
  instances of package libsane1:i386

Status in sane-backends package in Ubuntu:
  New

Bug description:
  This bug occurred when I logged into Ubuntu with the Deepin Desktop.

  ProblemType: Package
  DistroRelease: Ubuntu 17.10
  Package: libsane1 1.0.27-1~experimental2ubuntu2.1
  ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13
  Uname: Linux 4.13.0-21-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.7
  Architecture: amd64
  Date: Fri Jan  5 16:07:00 2018
  DuplicateSignature:
   package:libsane1:1.0.27-1~experimental2ubuntu2.1
   Unpacking libsane1:i386 (1.0.27-1~experimental2ubuntu2.1) ...
   dpkg: error processing archive 
/tmp/apt-dpkg-install-kBMXPm/097-libsane1_1.0.27-1~experimental2ubuntu2.1_i386.deb
 (--unpack):
trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is 
different from other instances of package libsane1:i386
  ErrorMessage: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', 
which is different from other instances of package libsane1:i386
  InstallationDate: Installed on 2017-07-24 (165 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 
3.6.3-0ubuntu2
  PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 
2.7.14-2ubuntu1
  RelatedPackageVersions:
   dpkg 1.18.24ubuntu1
   apt  1.5.1
  SourcePackage: sane-backends
  Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to 
install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', 
which is different from other instances of package libsane1:i386
  UpgradeStatus: Upgraded to artful on 2017-11-02 (64 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1741571/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741588] [NEW] Categories in Ubuntu Software don't work

[dmiller309]

Public bug reported:

I'm a developer on the Polarr team for Linux, and users should be able
to find the Polarr app under the Photography category of the Ubuntu
Software store.

I attached a screenshot of the Photography category in the Ubuntu 16.04
Software store. The other categories are similarly non-functional.

As you can see, there are only ellipses where there should be icons and
descriptive text for each of the photography applications. Clicking on
the items doesn't do anything.

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: ubuntu-software 3.20.5-0ubuntu0.16.04.7
ProcVersionSignature: Ubuntu 4.10.0-42.46~16.04.1-generic 4.10.17
Uname: Linux 4.10.0-42-generic x86_64
NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
ApportVersion: 2.20.1-0ubuntu2.15
Architecture: amd64
CurrentDesktop: Unity
Date: Thu Jan  4 10:41:25 2018
InstallationDate: Installed on 2017-12-19 (16 days ago)
InstallationMedia: Ubuntu 16.04.3 LTS "Xenial Xerus" - Release amd64 (20170801)
SourcePackage: gnome-software
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: gnome-software (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug xenial

** Attachment added: "Screenshot from 2018-01-04 10-44-44.png"
   
https://bugs.launchpad.net/bugs/1741588/+attachment/5031689/+files/Screenshot%20from%202018-01-04%2010-44-44.png

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1741588

Title:
  Categories in Ubuntu Software don't work

Status in gnome-software package in Ubuntu:
  New

Bug description:
  I'm a developer on the Polarr team for Linux, and users should be able
  to find the Polarr app under the Photography category of the Ubuntu
  Software store.

  I attached a screenshot of the Photography category in the Ubuntu
  16.04 Software store. The other categories are similarly non-
  functional.

  As you can see, there are only ellipses where there should be icons
  and descriptive text for each of the photography applications.
  Clicking on the items doesn't do anything.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: ubuntu-software 3.20.5-0ubuntu0.16.04.7
  ProcVersionSignature: Ubuntu 4.10.0-42.46~16.04.1-generic 4.10.17
  Uname: Linux 4.10.0-42-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.1-0ubuntu2.15
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Thu Jan  4 10:41:25 2018
  InstallationDate: Installed on 2017-12-19 (16 days ago)
  InstallationMedia: Ubuntu 16.04.3 LTS "Xenial Xerus" - Release amd64 
(20170801)
  SourcePackage: gnome-software
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1741588/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1739800] Re: Please remove gnome-python from Ubuntu

[Jeremy Bicha]

** No longer affects: rapid-photo-downloader (Ubuntu)

** Description changed:

  gnome-python and pyorbit have been removed from Debian Testing because
  it is an old GNOME2 library that hasn't been maintained in years. It
  will take some time for those packages to be removed from Debian
  Unstable, but I don't think we should ship gnome-python in Ubuntu 18.04
  LTS.
  
  I am filing this bug now in particular to provide early notice for the 
Ubuntu-specific packages firmware-tools and gnome-activity-journal. Both of 
those projects were abandoned upstream years ago.
  https://github.com/dell/firmware-tools
  https://code.launchpad.net/~gnome-zeitgeist/gnome-activity-journal/trunk
  
  This bug depends on LP: #1739797 (removal of gnome-python-desktop).
  (Therefore, I am not adding tasks here for packages on that list.)
  
  $ reverse-depends src:gnome-python
  Reverse-Recommends
  ==
  * colorname (for python-gnome2)
  * lottanzb  (for python-gnome2)
  * sbackup   (for python-gconf)
  * vusb-analyzer (for python-gnome2)
  
  Reverse-Depends
  ===
  * aptoncd   (for python-gnome2)
  * firmware-tools-gui(for python-gnome2)
  * gco   (for python-gnome2)
  * gdesklets (for python-gnome2)
  * ghextris  (for python-gnome2)
  * gjots2(for python-gnome2)
  * glipper   (for python-gconf)
  * gnome-activity-journal(for python-gnome2)
  * gnome-activity-journal(for python-gconf)
  * gnome-blog(for python-gconf)
  * gnome-blog(for python-gnome2)
  * gnome-btdownload  (for python-gconf)
  * gnome-btdownload  (for python-gnome2)
  * gnome-specimen(for python-gnome2)
  * guake (for python-gconf)
  * hamster-applet(for python-gconf)
  * hamster-applet(for python-gnome2)
  * labyrinth (for python-gconf)
  * lybniz(for python-gnome2)
  * postr (for python-gnome2)
  * postr (for python-gconf)
  * pybliographer (for python-gnome2)
  * pyrenamer (for python-gconf)
  * python-gnome2-desktop-dev (for python-gnome2-dev)
  * python-sugar-toolkit  (for python-gconf)
- * rapid-photo-downloader(for python-gconf)
- * rapid-photo-downloader(for python-gnome2)
  * revelation(for python-gnome2)
  * routeplanner-gnome(for python-gnome2)
  * sbackup-gtk   (for python-gnome2)
  * specto(for python-gnome2)
  * x-tile(for python-gconf)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to rapid-photo-downloader in Ubuntu.
https://bugs.launchpad.net/bugs/1739800

Title:
  Please remove gnome-python from Ubuntu

Status in aptoncd package in Ubuntu:
  New
Status in colorname package in Ubuntu:
  New
Status in firmware-tools package in Ubuntu:
  New
Status in gco package in Ubuntu:
  New
Status in ghextris package in Ubuntu:
  New
Status in gjots2 package in Ubuntu:
  New
Status in glipper package in Ubuntu:
  New
Status in gnome-activity-journal package in Ubuntu:
  New
Status in gnome-blog package in Ubuntu:
  New
Status in gnome-btdownload package in Ubuntu:
  New
Status in gnome-python package in Ubuntu:
  New
Status in gnome-specimen package in Ubuntu:
  New
Status in guake package in Ubuntu:
  New
Status in guake-indicator package in Ubuntu:
  New
Status in labyrinth package in Ubuntu:
  New
Status in lottanzb package in Ubuntu:
  New
Status in lybniz package in Ubuntu:
  New
Status in postr package in Ubuntu:
  New
Status in pybliographer package in Ubuntu:
  New
Status in pyorbit package in Ubuntu:
  New
Status in pyrenamer package in Ubuntu:
  New
Status in revelation package in Ubuntu:
  New
Status in routeplanner package in Ubuntu:
  New
Status in sbackup package in Ubuntu:
  New
Status in specto package in Ubuntu:
  New
Status in vusb-analyzer package in Ubuntu:
  New
Status in x-tile package in Ubuntu:
  New

Bug description:
  gnome-python and pyorbit have been removed from Debian Testing because
  it is an old GNOME2 library that hasn't been maintained in years. It
  will take some time for those packages to be removed from Debian
  Unstable, but I don't think we should ship gnome-python in Ubuntu
  18.04 LTS.

  I am filing this bug now in particular to provide early notice for the 
Ubuntu-specific packages firmware-tools and gnome-activity-journal. Both of 
those projects were abandoned upstream years ago.
  https://github.com/dell/firmware-tools
  https://code.launchpad.net/~gnome-zeitgeist/gnome-activity-journal/trunk

  This bug 

[Desktop-packages] [Bug 1741581] Re: buggy apparmor profile

[Seth Arnold]

And a corresponding bug in the AppArmor project in case we wish to
handle it there instead:

https://bugs.launchpad.net/apparmor/+bug/1741584

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice-l10n in Ubuntu.
https://bugs.launchpad.net/bugs/1741581

Title:
  buggy apparmor profile

Status in libreoffice package in Ubuntu:
  New
Status in libreoffice-l10n package in Ubuntu:
  New

Bug description:
  Nibaldo González has reported that the LibreOffice AppArmor profile
  has mistakes in it:

  https://lists.ubuntu.com/archives/apparmor/2018-January/011418.html

  > In this case, AppArmor grants write and read permissions to files with
  > extension: '.#.txt', '.#All', '.the', '.format', '.#.xml', '.and',
  > etc. Clearly, the profile must be fixed.

  I've confirmed this via apparmor_parser -Qd output on a slightly modified
  version of the source file:

  $ apparmor_parser -Qd < foo  | grep '#'
  Warning from stdin (line 1): apparmor_parser: cannot use or update cache, 
disable, or force-complain via stdin  
  Mode:   rwak:   Name:   
({/home//*,/root,/mnt,/media}/**.{[tT][xX][tT],#.txt,{,f,F}[oO][dDtT][tTsSpPbBgGfF],#All,the,open,document,format,[xX][mMsS][lL],#.xml,and,xsl,[pP][dD][fF],#.pdf,[uU][oO][fFtTsSpP],#Unified,office,format,{,x,X}[hH][tT][mM]{,l,L},#(x)htm(l),[jJ][pP][gG],[jJ][pP][eE][gG],[pP][nN][gG],[sS][vV][gG],[sS][vV][gG][zZ]99251,[tT][iI][fF],[tT][iI][fF][fF],[dD][oO][cCtT]{,x,X},[rR][tT][fF],[xX][lL][sSwWtT]{,x,X},[dD][iIbB][fF],#.dif,dbf,[cCtT][sS][vV],#.tsv,.csv,[sS][lL][kK],[pP][pP][tTsS]{,x,X},[pP][oO][tT]{,m,M},[sS][wW][fF],#Flash,[pP][sS][dD],#Photoshop,[mM][mM][lL]})

  
  The comments on the variable assignment lines are carried through to the
  policy.

  Thanks

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1741581/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741581] [NEW] buggy apparmor profile

[Seth Arnold]

Public bug reported:

Nibaldo González has reported that the LibreOffice AppArmor profile has
mistakes in it:

https://lists.ubuntu.com/archives/apparmor/2018-January/011418.html

> In this case, AppArmor grants write and read permissions to files with
> extension: '.#.txt', '.#All', '.the', '.format', '.#.xml', '.and',
> etc. Clearly, the profile must be fixed.

I've confirmed this via apparmor_parser -Qd output on a slightly modified
version of the source file:

$ apparmor_parser -Qd < foo  | grep '#'
Warning from stdin (line 1): apparmor_parser: cannot use or update cache, 
disable, or force-complain via stdin  
Mode:   rwak:   Name:   
({/home//*,/root,/mnt,/media}/**.{[tT][xX][tT],#.txt,{,f,F}[oO][dDtT][tTsSpPbBgGfF],#All,the,open,document,format,[xX][mMsS][lL],#.xml,and,xsl,[pP][dD][fF],#.pdf,[uU][oO][fFtTsSpP],#Unified,office,format,{,x,X}[hH][tT][mM]{,l,L},#(x)htm(l),[jJ][pP][gG],[jJ][pP][eE][gG],[pP][nN][gG],[sS][vV][gG],[sS][vV][gG][zZ]99251,[tT][iI][fF],[tT][iI][fF][fF],[dD][oO][cCtT]{,x,X},[rR][tT][fF],[xX][lL][sSwWtT]{,x,X},[dD][iIbB][fF],#.dif,dbf,[cCtT][sS][vV],#.tsv,.csv,[sS][lL][kK],[pP][pP][tTsS]{,x,X},[pP][oO][tT]{,m,M},[sS][wW][fF],#Flash,[pP][sS][dD],#Photoshop,[mM][mM][lL]})


The comments on the variable assignment lines are carried through to the
policy.

Thanks

** Affects: libreoffice (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: libreoffice-l10n (Ubuntu)
 Importance: Undecided
 Status: New

** Also affects: libreoffice-l10n (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libreoffice in Ubuntu.
https://bugs.launchpad.net/bugs/1741581

Title:
  buggy apparmor profile

Status in libreoffice package in Ubuntu:
  New
Status in libreoffice-l10n package in Ubuntu:
  New

Bug description:
  Nibaldo González has reported that the LibreOffice AppArmor profile
  has mistakes in it:

  https://lists.ubuntu.com/archives/apparmor/2018-January/011418.html

  > In this case, AppArmor grants write and read permissions to files with
  > extension: '.#.txt', '.#All', '.the', '.format', '.#.xml', '.and',
  > etc. Clearly, the profile must be fixed.

  I've confirmed this via apparmor_parser -Qd output on a slightly modified
  version of the source file:

  $ apparmor_parser -Qd < foo  | grep '#'
  Warning from stdin (line 1): apparmor_parser: cannot use or update cache, 
disable, or force-complain via stdin  
  Mode:   rwak:   Name:   
({/home//*,/root,/mnt,/media}/**.{[tT][xX][tT],#.txt,{,f,F}[oO][dDtT][tTsSpPbBgGfF],#All,the,open,document,format,[xX][mMsS][lL],#.xml,and,xsl,[pP][dD][fF],#.pdf,[uU][oO][fFtTsSpP],#Unified,office,format,{,x,X}[hH][tT][mM]{,l,L},#(x)htm(l),[jJ][pP][gG],[jJ][pP][eE][gG],[pP][nN][gG],[sS][vV][gG],[sS][vV][gG][zZ]99251,[tT][iI][fF],[tT][iI][fF][fF],[dD][oO][cCtT]{,x,X},[rR][tT][fF],[xX][lL][sSwWtT]{,x,X},[dD][iIbB][fF],#.dif,dbf,[cCtT][sS][vV],#.tsv,.csv,[sS][lL][kK],[pP][pP][tTsS]{,x,X},[pP][oO][tT]{,m,M},[sS][wW][fF],#Flash,[pP][sS][dD],#Photoshop,[mM][mM][lL]})

  
  The comments on the variable assignment lines are carried through to the
  policy.

  Thanks

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1741581/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1655348] Re: gpu-manager Error: can't open /lib/modules/

[Ayoub Boudhar]

I have a similar bug with the same premise, freezes using Google Chrome.
They tend to be very random, I only have them during playback.

Google Chrome: 63.0.3239.132 (64bits) (Although numerous versions before had 
the same problem)
Ubuntu 17.10 (4.13.0-21-generic)
Running on a Pentium N3530, no discrete GPU.

The logs are almost identical.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ubuntu-drivers-common in Ubuntu.
https://bugs.launchpad.net/bugs/1655348

Title:
  gpu-manager Error: can't open /lib/modules/

Status in ubuntu-drivers-common package in Ubuntu:
  Confirmed

Bug description:
  At least once a day there is an unexpected desktop freeze incl. mouse
  and keyboard. Even magic-sys-rq isn't possible, only hard switch-off.
  From smartmontools I can exclude a hardware failure.

  I've found that gpu-manager and systemd fail to load kernel modules.
  This is among the output of journalctl | grep modules
  Jan 10 13:12:34  systemd[1]: systemd-modules-load.service: Unit entered 
failed state.
  Jan 10 13:12:34  systemd[1]: systemd-modules-load.service: Failed with result 
'exit-code'.
  Jan 10 13:12:49  gpu-manager[791]: Error: can't open 
/lib/modules/4.4.0-57-generic/updates/dkms
  Jan 10 13:12:49  gpu-manager[791]: Error: can't open 
/lib/modules/4.4.0-57-generic/updates/dkms
  (terminal-output attached)

  dito with latest kernel

  Jan 11 07:53:04 gpu-manager[786]: Error: can't open 
/lib/modules/4.4.0-59-generic/updates/dkms
  Jan 11 07:53:04 gpu-manager[786]: Error: can't open 
/lib/modules/4.4.0-59-generic/updates/dkms

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: ubuntu-drivers-common 1:0.4.17.2
  ProcVersionSignature: Ubuntu 4.4.0-57.78-generic 4.4.35
  Uname: Linux 4.4.0-57-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.4
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Tue Jan 10 14:37:00 2017
  InstallationDate: Installed on 2012-02-05 (1801 days ago)
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Alpha amd64 
(20120204)
  SourcePackage: ubuntu-drivers-common
  UpgradeStatus: Upgraded to xenial on 2016-08-01 (162 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1655348/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1222183] Re: package emacsen-common 2.0.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[Vasiliy]

I fix this by next commands:
wget 
http://archive.ubuntu.com/ubuntu/pool/universe/x/xemacs21/xemacs21-mule_21.4.22-4ubuntu3_i386.deb
dpkg -i --force-all ./xemacs21-mule_21.4.22-4ubuntu3_i386.deb
apt-get -f install
apt remove xemacs21-mule

Hmmm... emacsen-common require xemacs, xemacs21 require emacsen-common,
I don't need this stuff at all )) Just finish upgrade.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to emacsen-common in Ubuntu.
https://bugs.launchpad.net/bugs/1222183

Title:
  package emacsen-common 2.0.3 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 1

Status in emacsen-common package in Ubuntu:
  Confirmed

Bug description:
  
  Ugrade from 12.10 to 13.04

  Setting up emacsen-common (2.0.3) ...
  Install emacsen-common for xemacs21
  emacsen-common: Handling install of emacsen flavor xemacs21
  /usr/lib/emacsen-common/packages/install/emacsen-common: 29: 
/usr/lib/emacsen-common/packages/install/emacsen-common: xemacs21: not found
  ERROR: install script from emacsen-common package failed
  dpkg: error processing emacsen-common (--configure):
   subprocess installed post-installation script returned error exit status 1
  dpkg: dependency problems prevent configuration of cmake-data:
   cmake-data depends on emacsen-common; however:
Package emacsen-common is not configured yet.

  dpkg: error processing cmake-data (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of cmake:
   cmake depends on cmake-data (= 2.8.9-0ubuntu1); however:
Package cmake-data is not configured yet.

  dpkg: error processing cmake (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of xemacs21-nomule:
   xemacs21-nomule depends on emacsen-common; however:
Package emacsen-common is not configured yet.

  dpkg: error processing xemacs21-nomule (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of xemacs21:
   xemacs21 depends on xemacs21-mule (>= 21.4.22-3.2ubuntu2) | 
xemacs21-mule-canna-wnn (>= 21.4.22-3.2ubuntu2) | xemacs21-nomule (>= 
21.4.22-3.2ubuntu2); however:
Package xeNo apport report written because the error message indicates its 
a followup error from a previous failure.

No apport report written because the 
error message indicates its a followup error from a previous failure.
   No apport report written 
because MaxReports is reached already

 No apport report written because MaxReports is 
reached already


   No apport report written because MaxReports is reached already
  No apport report 
written because MaxReports is reached already

macs21-mule is not installed.
Package xemacs21-mule-canna-wnn is not installed.
Package xemacs21-nomule is not configured yet.

  dpkg: error processing xemacs21 (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of xemacs21-support:
   xemacs21-support depends on emacsen-common; however:
Package emacsen-common is not configured yet.
   xemacs21-support depends on xemacs21 (= 21.4.22-3.2ubuntu2); however:
Package xemacs21 is not configured yet.

  dpkg: error processing xemacs21-support (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of xemacs21-bin:
   xemacs21-bin depends on xemacs21-support (= 21.4.22-3.2ubuntu2); however:
Package xemacs21-support is not configured yet.

  dpkg: error processing xemacs21-bin (--configure):
   dependency problems - leaving unconfigured
  Errors were encountered while processing:
   emacsen-common
   cmake-data
   cmake
   xemacs21-nomule
   xemacs21
   xemacs21-support
   xemacs21-bin
  E: Sub-process /usr/bin/dpkg returned an error code (1)

  ProblemType: Package
  DistroRelease: Ubuntu 12.10
  Package: emacsen-common 2.0.3
  ProcVersionSignature: Ubuntu 3.5.0-40.62-generic 3.5.7.20
  Uname: Linux 3.5.0-40-generic x86_64
  ApportVersion: 2.6.1-0ubuntu12
  Architecture: amd64
  Date: Sat Sep  7 17:21:48 2013
  Dependencies:
   
  DuplicateSignature: package:emacsen-common:2.0.3:subprocess installed 
post-installation script returned error exit status 1
  

[Desktop-packages] [Bug 1222183] Re: package emacsen-common 2.0.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[Vasiliy]

Approve problem after upgrading from 14.04.2 to 16.04.3.

Настраивается пакет emacsen-common (2.0.8) …
Install emacsen-common for xemacs21
emacsen-common: Handling install of emacsen flavor xemacs21
/usr/lib/emacsen-common/packages/install/emacsen-common: 29: 
/usr/lib/emacsen-common/packages/install/emacsen-common: xemacs21: not found
ERROR: install script from emacsen-common package failed
dpkg: ошибка при обработке пакета emacsen-common (--configure):
 подпроцесс установлен сценарий post-installation возвратил код ошибки 1
dpkg: зависимости пакетов не позволяют настроить пакет dictionaries-common:
 dictionaries-common зависит от emacsen-common (>= 2.0.5), однако:
  Пакет emacsen-common пока не настроен.

dpkg: ошибка при обработке пакета dictionaries-common (--configure):
 проблемы зависимостей — оставляем не настроенным
dpkg: зависимости пакетов не позволяют настроить пакет aspell:
 aspell зависит от dictionaries-common (>> 0.40), однако:
  Пакет dictionaries-common пока не настроен.

dpkg: ошибка при обработке пакета aspell (--configure):
 проблемы зависимостей — оставляем не настроенным
dpkg: зависимости пакетов не позволяют настроить пакет aspell-en:
 aspell-en зависит от aspell (>= 0.60.3-2), однако:
  Пакет aspell пока не настроен.
 aspell-en зависит от dictionaries-common (>= 0.49.2), однако:
  Пакет dictionaries-common пока не настроен.

dpkg: ошибка при обработке пакета aspell-en (--configure):
 проблемы зависимостей — оставляем не настроенным
dpkg: зависимости пакетов не позволяют настроить пакет hunspell-en-ca:
 hunspell-en-ca зависит от dictionaries-common, однако:
  Пакет dictionaries-common пока не настроен.

dpkg: ошибка при обработке пакета hunspell-en-ca (--configure):
 проблемы зависимостей — оставляем не настроенным
dpkg: зависимости пакетов не позволяют настроить пакет hunspell-en-us:
 hunspell-en-us зависит от dictionaries-common (>= 0.10), однако:
  Пакет dictionaries-common пока не настроен.

dpkg: ошибка при обработке пакета hunspell-en-us (--configure):
 проблемы зависимостей — оставляем не настроенным
dpkg: зависимости пакетов не позволяют настроить пакет hyphen-ru:
 hyphen-ru зависит от dictionaries-common (>= 0.10) | 
openoffice.org-updatedicts, однако:
  Пакет dictionaries-common пока не настроен.
  Пакет openoffice.org-updatedicts не установлен.
  Пакет dictionaries-common, предоставляющий openoffice.org-updatedicts, пока 
не настроен.

dpkg: ошибка при обработке пакета hyphen-ru (--configure):
 проблемы зависимостей — оставляем не настроенным
dpkg: зависимости пакетов не позволяют настроить пакет hyphen-en-us:
 hyphen-en-us зависит от dictionaries-common (>= 0.10) | 
openoffice.org-updatedicts, однако:
  Пакет dictionaries-common пока не настроен.
  Пакет openoffice.org-updatedicts не установлен.
  Пакет dictionaries-common, предоставляющий openoffice.org-updatedicts, пока 
не настроен.

dpkg: ошибка при обработке пакета hyphen-en-us (--configure):
 проблемы зависимостей — оставляем не настроенным
dpkg: зависимости пакетов не позволяют настроить пакет miscfiles:
 miscfiles зависит от dictionaries-common (>= 1.0), однако:
  Пакет dictionaries-common пока не настроен.

dpkg: ошибка при обработке пакета miscfiles (--configure):
 проблемы зависимостей — оставляем не настроенным
При обработке следующих пакетов произошли ошибки:
 emacsen-common
 dictionaries-common
 aspell
 aspell-en
 hunspell-en-ca
 hunspell-en-us
 hyphen-ru
 hyphen-en-us
 miscfiles

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to emacsen-common in Ubuntu.
https://bugs.launchpad.net/bugs/1222183

Title:
  package emacsen-common 2.0.3 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 1

Status in emacsen-common package in Ubuntu:
  Confirmed

Bug description:
  
  Ugrade from 12.10 to 13.04

  Setting up emacsen-common (2.0.3) ...
  Install emacsen-common for xemacs21
  emacsen-common: Handling install of emacsen flavor xemacs21
  /usr/lib/emacsen-common/packages/install/emacsen-common: 29: 
/usr/lib/emacsen-common/packages/install/emacsen-common: xemacs21: not found
  ERROR: install script from emacsen-common package failed
  dpkg: error processing emacsen-common (--configure):
   subprocess installed post-installation script returned error exit status 1
  dpkg: dependency problems prevent configuration of cmake-data:
   cmake-data depends on emacsen-common; however:
Package emacsen-common is not configured yet.

  dpkg: error processing cmake-data (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of cmake:
   cmake depends on cmake-data (= 2.8.9-0ubuntu1); however:
Package cmake-data is not configured yet.

  dpkg: error processing cmake (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of xemacs21-nomule:
   xemacs21-nomule depends on emacsen-common; however:
Package 

[Desktop-packages] [Bug 1222183] Re: package emacsen-common 2.0.3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[Vasiliy]

root@spire:~# dpkg -l | grep emacs | cut -d' ' -f3 | xargs apt-get -y purge
Чтение списков пакетов… Готово
Построение дерева зависимостей   
Чтение информации о состоянии… Готово
Некоторые пакеты невозможно установить. Возможно, вы просите невозможного,
или же используете нестабильную версию дистрибутива, где запрошенные вами
пакеты ещё не созданы или были удалены из Incoming.
Следующая информация, возможно, поможет вам:

Пакеты, имеющие неудовлетворённые зависимости:
 ubuntu-release-upgrader-gtk : Зависит: gir1.2-webkit2-4.0 но он не будет 
установлен или
   gir1.2-webkit-3.0 но он не будет 
установлен
E: Ошибка, pkgProblemResolver::Resolve сгенерировал повреждённые пакеты. Это 
может быть вызвано отложенными (held) пакетами.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to emacsen-common in Ubuntu.
https://bugs.launchpad.net/bugs/1222183

Title:
  package emacsen-common 2.0.3 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 1

Status in emacsen-common package in Ubuntu:
  Confirmed

Bug description:
  
  Ugrade from 12.10 to 13.04

  Setting up emacsen-common (2.0.3) ...
  Install emacsen-common for xemacs21
  emacsen-common: Handling install of emacsen flavor xemacs21
  /usr/lib/emacsen-common/packages/install/emacsen-common: 29: 
/usr/lib/emacsen-common/packages/install/emacsen-common: xemacs21: not found
  ERROR: install script from emacsen-common package failed
  dpkg: error processing emacsen-common (--configure):
   subprocess installed post-installation script returned error exit status 1
  dpkg: dependency problems prevent configuration of cmake-data:
   cmake-data depends on emacsen-common; however:
Package emacsen-common is not configured yet.

  dpkg: error processing cmake-data (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of cmake:
   cmake depends on cmake-data (= 2.8.9-0ubuntu1); however:
Package cmake-data is not configured yet.

  dpkg: error processing cmake (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of xemacs21-nomule:
   xemacs21-nomule depends on emacsen-common; however:
Package emacsen-common is not configured yet.

  dpkg: error processing xemacs21-nomule (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of xemacs21:
   xemacs21 depends on xemacs21-mule (>= 21.4.22-3.2ubuntu2) | 
xemacs21-mule-canna-wnn (>= 21.4.22-3.2ubuntu2) | xemacs21-nomule (>= 
21.4.22-3.2ubuntu2); however:
Package xeNo apport report written because the error message indicates its 
a followup error from a previous failure.

No apport report written because the 
error message indicates its a followup error from a previous failure.
   No apport report written 
because MaxReports is reached already

 No apport report written because MaxReports is 
reached already


   No apport report written because MaxReports is reached already
  No apport report 
written because MaxReports is reached already

macs21-mule is not installed.
Package xemacs21-mule-canna-wnn is not installed.
Package xemacs21-nomule is not configured yet.

  dpkg: error processing xemacs21 (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of xemacs21-support:
   xemacs21-support depends on emacsen-common; however:
Package emacsen-common is not configured yet.
   xemacs21-support depends on xemacs21 (= 21.4.22-3.2ubuntu2); however:
Package xemacs21 is not configured yet.

  dpkg: error processing xemacs21-support (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of xemacs21-bin:
   xemacs21-bin depends on xemacs21-support (= 21.4.22-3.2ubuntu2); however:
Package xemacs21-support is not configured yet.

  dpkg: error processing xemacs21-bin (--configure):
   dependency problems - leaving unconfigured
  Errors were encountered while processing:
   emacsen-common
   cmake-data
   cmake
   xemacs21-nomule
   xemacs21
   xemacs21-support
   xemacs21-bin
  E: Sub-process /usr/bin/dpkg returned an error code (1)

  ProblemType: 

[Desktop-packages] [Bug 1296020] Re: [Asus U36JC] Non-existent display detected in both intel driver and nvidia driver (Optimus Laptop) (ubuntu trusty 14.04)

[Krzysztof Hycnar]

As a workaround the following executed on startup seems to work

xrandr --output VGA-0 --off

But it assumes the display will always be detected as VGA=0 and far from
ideal

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-prime in Ubuntu.
https://bugs.launchpad.net/bugs/1296020

Title:
  [Asus U36JC] Non-existent display detected in both intel driver and
  nvidia driver (Optimus Laptop) (ubuntu trusty 14.04)

Status in nvidia-prime package in Ubuntu:
  Triaged
Status in ubuntu-drivers-common package in Ubuntu:
  Fix Released
Status in nvidia-prime source package in Precise:
  Triaged
Status in ubuntu-drivers-common source package in Precise:
  Invalid
Status in nvidia-prime source package in Trusty:
  Invalid
Status in ubuntu-drivers-common source package in Trusty:
  Fix Released

Bug description:
  SRU Request

  Systems with Optimus (Intel+NVIDIA GPUs) can have ghost VGA devices
  hardcoded in the BIOS. This leads the system into thinking that there
  is actually one more active output than there really is.

  [Impact]
   * The ghost VGA output confuses lightdm and the gnome-settings-daemon making 
the system unusable.

  [Test Case]
   * Install the nvidia binary driver, reboot, and check the output of the 
"xrandr -q" command
  - Expected: only the outputs that are actually connected will be marked 
as active.
  - Bad behavior: a non-existent VGA device will show up in the output.

  [Regression Potential]
   * Low, as it only disables CRT outputs in the nvidia driver.

  [Other Info]
   * N/A

  --

  There is a non existent display detected in both intel driver only and nvidia 
331 driver installation.
  The non existent display is "Unknown Display" shown in gnome-control-center 
--> display and "CRT-0" in nvidia-settings, and "VGA-0" in xrandr -q output.
  It will cause gdm failed to start. gnome-shell has some crazy layouts. 
lightdm will only occupy 2/3 of monitor in top left corner.
  I tested this in intel driver only environment. and nvidia-331 installation 
environment.
  My laptop is Asus U36JC. My monitor correct resolution is 1366x768.

  The following is the output of "xrandr -q" in gnome-shell with
  nvidia-331 installed:

  $ xrandr -q
  Screen 0: minimum 8 x 8, current 1366 x 768, maximum 8192 x 8192
  VGA-0 connected primary 680x384+0+0 (normal left inverted right x axis y 
axis) 0mm x 0mm panning 1366x768+0+0
     680x384 60.0*+
     1366x768 60.0
     1360x768 60.0
  HDMI-0 disconnected (normal left inverted right x axis y axis)
  LVDS-1-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 
293mm x 165mm
     1366x768 60.0*+
     1360x768 59.8 60.0
     1024x768 60.0 60.0
     960x720 60.0
     928x696 60.1
     896x672 60.0
     960x600 60.0
     960x540 60.0
     800x600 60.0 60.3 56.2
     840x525 60.0 59.9
     800x512 60.2
     700x525 60.0
     640x512 60.0
     720x450 59.9
     640x480 60.0 59.9
     680x384 59.8 60.0
     576x432 60.1
     512x384 60.0
     400x300 60.3 56.3
     320x240 60.1
  VGA-1-0 disconnected (normal left inverted right x axis y axis)
  HDMI-1-0 disconnected (normal left inverted right x axis y axis)
  DisplayPort-1-0 disconnected (normal left inverted right x axis y axis)
    1366x768 (0x46) 69.3MHz
  h: width 1366 start 1425 end 1464 total 1472 skew 0 clock 47.1KHz
  v: height 768 start 773 end 782 total 785 clock 60.0Hz
    1360x768 (0x48) 72.0MHz
  h: width 1360 start 1408 end 1440 total 1520 skew 0 clock 47.4KHz
  v: height 768 start 771 end 781 total 790 clock 60.0Hz
    680x384 (0x5c) 36.0MHz
  h: width 680 start 704 end 720 total 760 skew 0 clock 47.4KHz
  v: height 384 start 385 end 390 total 395 clock 60.0Hz

  The following is the output of "xrandr -q" in lxde with nvidia-331
  installed:

  $ xrandr -q
  Screen 0: minimum 8 x 8, current 1366 x 768, maximum 8192 x 8192
  VGA-0 connected primary 1024x768+31+0 (normal left inverted right x axis y 
axis) 0mm x 0mm panning 1366x768+0+0
     680x38460.0 +
     1366x768   60.0
     1360x768   60.0
  HDMI-0 disconnected (normal left inverted right x axis y axis)
  LVDS-1-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 
293mm x 165mm
     1366x768   60.0*+
     1360x768   59.8 60.0
     1024x768   60.0 60.0
     960x72060.0
     928x69660.1
     896x67260.0
     960x60060.0
     960x54060.0
     800x60060.0 60.3 56.2
     840x52560.0 59.9
     800x51260.2
     700x52560.0
     640x51260.0
     720x45059.9
     640x48060.0 59.9
     680x38459.8 60.0
     576x43260.1
     512x38460.0
     400x30060.3 56.3
     320x24060.1
  VGA-1-0 disconnected (normal left inverted right x axis y axis)
  HDMI-1-0 disconnected (normal left inverted right x axis y axis)

[Desktop-packages] [Bug 1577197] Re: Pulseaudio bluez5-util.c: TryAcquire() failed - Operation Not Authorized

[Zeppe]

Im still experiencing this problem on Ubuntu 17.10 (very infrequently).
I'm getting:

[pulseaudio] bluez5-util.c: Transport TryAcquire() failed for transport
/org/bluez/hci0/dev_00_0C_8A_86_6A_94/fd0 (Operation Not Authorized)

often even in between 2 videos on youtube. This will freeze any video
playing btw. I can resolve with  `pulseaudio -k` and repairing the
bluetooth device.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1577197

Title:
  Pulseaudio bluez5-util.c: TryAcquire() failed  - Operation Not
  Authorized

Status in bluez package in Ubuntu:
  Fix Released
Status in indicator-sound package in Ubuntu:
  Invalid
Status in pulseaudio package in Ubuntu:
  Fix Released

Bug description:
  Pulseaudio outright stops audio via Bluetooth after sleep or prolonged period 
of time. Only restart fixes the issue. This started early 2016 in 15.10.
  Issue is discussed here as well 
http://askubuntu.com/questions/763539/bluetooth-speaker-no-sound-in-ubuntu-16-04
 and mentioned in other unrelated bugs.

  Ubuntu Xenial 16.04 LTS

  The log below:

  May  1 17:18:07 jalexoidmobile pulseaudio[2884]: [pulseaudio] 
module-bluez5-device.c: Default profile not connected, selecting off profile
  May  1 17:18:07 jalexoidmobile bluetoothd[7349]: 
/org/bluez/hci0/dev_00_02_3C_05_99_F2/fd4: fd(35) ready
  May  1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Supervising 3 threads of 1 
processes of 1 users.
  May  1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Successfully made thread 
10967 of process 2884 (n/a) owned by '1000' RT at priority 5.
  May  1 17:18:07 jalexoidmobile rtkit-daemon[1794]: Supervising 4 threads of 1 
processes of 1 users.
  May  1 17:18:07 jalexoidmobile pulseaudio[2884]: [pulseaudio] bluez5-util.c: 
Transport TryAcquire() failed for transport 
/org/bluez/hci0/dev_00_02_3C_05_99_F2/fd4 (Operation Not Authorized)
  May  1 17:18:07 jalexoidmobile kernel: [20583.032442] input: 
00:02:3C:05:99:F2 as /devices/virtual/input/input24
  May  1 17:18:19 jalexoidmobile pulseaudio[2884]: [pulseaudio] sink-input.c: 
Failed to create sink input: sink is suspended.


  Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 001 Device 006: ID 04f2:b2da Chicony Electronics Co., Ltd thinkpad t430s 
camera
  Bus 001 Device 008: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 
[ThinkPad]
  Bus 001 Device 004: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF 
advanced mode)
  Bus 001 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader
  Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  [20388.983474] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  [20389.070114] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
  [20389.070120] usb 1-1.4: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
  [20389.070122] usb 1-1.4: Product: BCM20702A0
  [20389.070124] usb 1-1.4: Manufacturer: Broadcom Corp
  [20389.070126] usb 1-1.4: SerialNumber: 446D578686DD
  [20389.076232] Bluetooth: hci0: BCM: chip id 63
  [20389.092220] Bluetooth: hci0: BCM20702A
  [20389.093225] Bluetooth: hci0: BCM20702A1 (001.002.014) build 
  [20389.551476] wlan0: authenticate with a0:63:91:2f:3f:ed
  [20389.554391] wlan0: send auth to a0:63:91:2f:3f:ed (try 1/3)
  [20389.557790] wlan0: authenticated
  [20389.558339] wlan0: associate with a0:63:91:2f:3f:ed (try 1/3)
  [20389.562209] wlan0: RX AssocResp from a0:63:91:2f:3f:ed (capab=0x1411 
status=0 aid=2)
  [20389.581260] wlan0: associated
  [20389.581369] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  [20389.830185] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
  [20389.846186] Bluetooth: hci0: Broadcom Bluetooth Device
  [20418.269466] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input23
  [20583.032442] input: 00:02:3C:05:99:F2 as /devices/virtual/input/input24

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1577197/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1721428] Re: Artful (17.10) Session logout after screen turned off

[Andrzej Wojtaszewski]

That worked but I had to ask for access to bug tracking since I'm new to
this.

Just hope there's no confirmation link etc. email from Canonical since I
lost access to mail account I used to create U1 acount way back then.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/1721428

Title:
  Artful (17.10) Session logout after screen turned off

Status in GNOME Shell:
  Unknown
Status in Nouveau Xorg driver:
  New
Status in gnome-shell package in Ubuntu:
  Incomplete
Status in mutter package in Ubuntu:
  Incomplete

Bug description:
  Whenever I turn off my screen, the computer (a desktop PC) logs me out
  of my session.

  Here is a discussion thread with users of similar issue:
  
https://ubuntuforums.org/showthread.php?t=2372388=13694312=1#post13694312

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-shell/+bug/1721428/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741571] [NEW] package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from o

[William A Ellerbe]

Public bug reported:

This bug occurred when I logged into Ubuntu with the Deepin Desktop.

ProblemType: Package
DistroRelease: Ubuntu 17.10
Package: libsane1 1.0.27-1~experimental2ubuntu2.1
ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13
Uname: Linux 4.13.0-21-generic x86_64
ApportVersion: 2.20.7-0ubuntu3.7
Architecture: amd64
Date: Fri Jan  5 16:07:00 2018
DuplicateSignature:
 package:libsane1:1.0.27-1~experimental2ubuntu2.1
 Unpacking libsane1:i386 (1.0.27-1~experimental2ubuntu2.1) ...
 dpkg: error processing archive 
/tmp/apt-dpkg-install-kBMXPm/097-libsane1_1.0.27-1~experimental2ubuntu2.1_i386.deb
 (--unpack):
  trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is 
different from other instances of package libsane1:i386
ErrorMessage: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which 
is different from other instances of package libsane1:i386
InstallationDate: Installed on 2017-07-24 (165 days ago)
InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 
3.6.3-0ubuntu2
PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 
2.7.14-2ubuntu1
RelatedPackageVersions:
 dpkg 1.18.24ubuntu1
 apt  1.5.1
SourcePackage: sane-backends
Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to 
install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', 
which is different from other instances of package libsane1:i386
UpgradeStatus: Upgraded to artful on 2017-11-02 (64 days ago)

** Affects: sane-backends (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package artful package-conflict

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to sane-backends in Ubuntu.
https://bugs.launchpad.net/bugs/1741571

Title:
  package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to
  install/upgrade: trying to overwrite shared
  '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other
  instances of package libsane1:i386

Status in sane-backends package in Ubuntu:
  New

Bug description:
  This bug occurred when I logged into Ubuntu with the Deepin Desktop.

  ProblemType: Package
  DistroRelease: Ubuntu 17.10
  Package: libsane1 1.0.27-1~experimental2ubuntu2.1
  ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13
  Uname: Linux 4.13.0-21-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.7
  Architecture: amd64
  Date: Fri Jan  5 16:07:00 2018
  DuplicateSignature:
   package:libsane1:1.0.27-1~experimental2ubuntu2.1
   Unpacking libsane1:i386 (1.0.27-1~experimental2ubuntu2.1) ...
   dpkg: error processing archive 
/tmp/apt-dpkg-install-kBMXPm/097-libsane1_1.0.27-1~experimental2ubuntu2.1_i386.deb
 (--unpack):
trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is 
different from other instances of package libsane1:i386
  ErrorMessage: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', 
which is different from other instances of package libsane1:i386
  InstallationDate: Installed on 2017-07-24 (165 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 
3.6.3-0ubuntu2
  PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 
2.7.14-2ubuntu1
  RelatedPackageVersions:
   dpkg 1.18.24ubuntu1
   apt  1.5.1
  SourcePackage: sane-backends
  Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to 
install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', 
which is different from other instances of package libsane1:i386
  UpgradeStatus: Upgraded to artful on 2017-11-02 (64 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1741571/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741571] Re: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is different from oth

[Apport retracing service]

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to sane-backends in Ubuntu.
https://bugs.launchpad.net/bugs/1741571

Title:
  package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to
  install/upgrade: trying to overwrite shared
  '/lib/udev/hwdb.d/20-sane.hwdb', which is different from other
  instances of package libsane1:i386

Status in sane-backends package in Ubuntu:
  New

Bug description:
  This bug occurred when I logged into Ubuntu with the Deepin Desktop.

  ProblemType: Package
  DistroRelease: Ubuntu 17.10
  Package: libsane1 1.0.27-1~experimental2ubuntu2.1
  ProcVersionSignature: Ubuntu 4.13.0-21.24-generic 4.13.13
  Uname: Linux 4.13.0-21-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.7
  Architecture: amd64
  Date: Fri Jan  5 16:07:00 2018
  DuplicateSignature:
   package:libsane1:1.0.27-1~experimental2ubuntu2.1
   Unpacking libsane1:i386 (1.0.27-1~experimental2ubuntu2.1) ...
   dpkg: error processing archive 
/tmp/apt-dpkg-install-kBMXPm/097-libsane1_1.0.27-1~experimental2ubuntu2.1_i386.deb
 (--unpack):
trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', which is 
different from other instances of package libsane1:i386
  ErrorMessage: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', 
which is different from other instances of package libsane1:i386
  InstallationDate: Installed on 2017-07-24 (165 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412)
  Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 
3.6.3-0ubuntu2
  PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 
2.7.14-2ubuntu1
  RelatedPackageVersions:
   dpkg 1.18.24ubuntu1
   apt  1.5.1
  SourcePackage: sane-backends
  Title: package libsane1 1.0.27-1~experimental2ubuntu2.1 failed to 
install/upgrade: trying to overwrite shared '/lib/udev/hwdb.d/20-sane.hwdb', 
which is different from other instances of package libsane1:i386
  UpgradeStatus: Upgraded to artful on 2017-11-02 (64 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1741571/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1296020] Re: [Asus U36JC] Non-existent display detected in both intel driver and nvidia driver (Optimus Laptop) (ubuntu trusty 14.04)

[Krzysztof Hycnar]

Same here with Ubuntu 16.04 running on Lenovo T420s with NVidia NVS
4200M

Screen 0: minimum 8 x 8, current 2624 x 900, maximum 16384 x 16384
VGA-0 connected 1024x768+1600+0 (normal left inverted right x axis y axis) 0mm 
x 0mm
   1024x768  60.00*+
   1360x768  59.9659.80  
   1152x864  60.00  
   800x600   72.1960.3256.25  
   680x384   59.9659.80  
   640x480   59.94  
   512x384   60.00  
   400x300   72.19  
   320x240   60.05  
LVDS-0 connected primary 1600x900+0+0 (normal left inverted right x axis y 
axis) 309mm x 174mm
   1600x900  60.01*+  40.00  
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)

** Attachment added: "gpu-manager.log"
   
https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1296020/+attachment/5031664/+files/gpu-manager.log

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-prime in Ubuntu.
https://bugs.launchpad.net/bugs/1296020

Title:
  [Asus U36JC] Non-existent display detected in both intel driver and
  nvidia driver (Optimus Laptop) (ubuntu trusty 14.04)

Status in nvidia-prime package in Ubuntu:
  Triaged
Status in ubuntu-drivers-common package in Ubuntu:
  Fix Released
Status in nvidia-prime source package in Precise:
  Triaged
Status in ubuntu-drivers-common source package in Precise:
  Invalid
Status in nvidia-prime source package in Trusty:
  Invalid
Status in ubuntu-drivers-common source package in Trusty:
  Fix Released

Bug description:
  SRU Request

  Systems with Optimus (Intel+NVIDIA GPUs) can have ghost VGA devices
  hardcoded in the BIOS. This leads the system into thinking that there
  is actually one more active output than there really is.

  [Impact]
   * The ghost VGA output confuses lightdm and the gnome-settings-daemon making 
the system unusable.

  [Test Case]
   * Install the nvidia binary driver, reboot, and check the output of the 
"xrandr -q" command
  - Expected: only the outputs that are actually connected will be marked 
as active.
  - Bad behavior: a non-existent VGA device will show up in the output.

  [Regression Potential]
   * Low, as it only disables CRT outputs in the nvidia driver.

  [Other Info]
   * N/A

  --

  There is a non existent display detected in both intel driver only and nvidia 
331 driver installation.
  The non existent display is "Unknown Display" shown in gnome-control-center 
--> display and "CRT-0" in nvidia-settings, and "VGA-0" in xrandr -q output.
  It will cause gdm failed to start. gnome-shell has some crazy layouts. 
lightdm will only occupy 2/3 of monitor in top left corner.
  I tested this in intel driver only environment. and nvidia-331 installation 
environment.
  My laptop is Asus U36JC. My monitor correct resolution is 1366x768.

  The following is the output of "xrandr -q" in gnome-shell with
  nvidia-331 installed:

  $ xrandr -q
  Screen 0: minimum 8 x 8, current 1366 x 768, maximum 8192 x 8192
  VGA-0 connected primary 680x384+0+0 (normal left inverted right x axis y 
axis) 0mm x 0mm panning 1366x768+0+0
     680x384 60.0*+
     1366x768 60.0
     1360x768 60.0
  HDMI-0 disconnected (normal left inverted right x axis y axis)
  LVDS-1-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 
293mm x 165mm
     1366x768 60.0*+
     1360x768 59.8 60.0
     1024x768 60.0 60.0
     960x720 60.0
     928x696 60.1
     896x672 60.0
     960x600 60.0
     960x540 60.0
     800x600 60.0 60.3 56.2
     840x525 60.0 59.9
     800x512 60.2
     700x525 60.0
     640x512 60.0
     720x450 59.9
     640x480 60.0 59.9
     680x384 59.8 60.0
     576x432 60.1
     512x384 60.0
     400x300 60.3 56.3
     320x240 60.1
  VGA-1-0 disconnected (normal left inverted right x axis y axis)
  HDMI-1-0 disconnected (normal left inverted right x axis y axis)
  DisplayPort-1-0 disconnected (normal left inverted right x axis y axis)
    1366x768 (0x46) 69.3MHz
  h: width 1366 start 1425 end 1464 total 1472 skew 0 clock 47.1KHz
  v: height 768 start 773 end 782 total 785 clock 60.0Hz
    1360x768 (0x48) 72.0MHz
  h: width 1360 start 1408 end 1440 total 1520 skew 0 clock 47.4KHz
  v: height 768 start 771 end 781 total 790 clock 60.0Hz
    680x384 (0x5c) 36.0MHz
  h: width 680 start 704 end 720 total 760 skew 0 clock 47.4KHz
  v: height 384 start 385 end 390 total 395 clock 60.0Hz

  The following is the output of "xrandr -q" in lxde with nvidia-331
  installed:

  $ xrandr -q
  Screen 0: minimum 8 x 8, current 1366 x 768, maximum 8192 x 8192
  VGA-0 connected primary 1024x768+31+0 (normal left inverted right x axis y 

[Desktop-packages] [Bug 1741565] [NEW] package gtk-update-icon-cache (not installed) failed to install/upgrade: el subproceso script pre-installation nuevo devolvió el código de salida de error 2

[alberto martinez]

Public bug reported:

I don't know what happend

ProblemType: Package
DistroRelease: Ubuntu 17.04
Package: gtk-update-icon-cache (not installed)
ProcVersionSignature: Ubuntu 4.4.0-97.120-generic 4.4.87
Uname: Linux 4.4.0-97-generic x86_64
ApportVersion: 2.20.4-0ubuntu4.9
AptOrdering:
 gtk-update-icon-cache:amd64: Install
 NULL: ConfigurePending
Architecture: amd64
Date: Fri Jan  5 14:56:46 2018
DpkgHistoryLog:
 Start-Date: 2018-01-05  14:56:44
 Commandline: apt --fix-broken install
 Requested-By: amartinez (1000)
 Install: gtk-update-icon-cache:amd64 (3.22.11-0ubuntu3, automatic)
ErrorMessage: el subproceso script pre-installation nuevo devolvió el código de 
salida de error 2
InstallationDate: Installed on 2017-03-15 (296 days ago)
InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719)
RelatedPackageVersions:
 dpkg 1.18.10ubuntu2
 apt  1.4.6~17.04.1
SourcePackage: gtk+3.0
Title: package gtk-update-icon-cache (not installed) failed to install/upgrade: 
el subproceso script pre-installation nuevo devolvió el código de salida de 
error 2
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: gtk+3.0 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package zesty

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1741565

Title:
  package gtk-update-icon-cache (not installed) failed to
  install/upgrade: el subproceso script pre-installation nuevo devolvió
  el código de salida de error 2

Status in gtk+3.0 package in Ubuntu:
  New

Bug description:
  I don't know what happend

  ProblemType: Package
  DistroRelease: Ubuntu 17.04
  Package: gtk-update-icon-cache (not installed)
  ProcVersionSignature: Ubuntu 4.4.0-97.120-generic 4.4.87
  Uname: Linux 4.4.0-97-generic x86_64
  ApportVersion: 2.20.4-0ubuntu4.9
  AptOrdering:
   gtk-update-icon-cache:amd64: Install
   NULL: ConfigurePending
  Architecture: amd64
  Date: Fri Jan  5 14:56:46 2018
  DpkgHistoryLog:
   Start-Date: 2018-01-05  14:56:44
   Commandline: apt --fix-broken install
   Requested-By: amartinez (1000)
   Install: gtk-update-icon-cache:amd64 (3.22.11-0ubuntu3, automatic)
  ErrorMessage: el subproceso script pre-installation nuevo devolvió el código 
de salida de error 2
  InstallationDate: Installed on 2017-03-15 (296 days ago)
  InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  RelatedPackageVersions:
   dpkg 1.18.10ubuntu2
   apt  1.4.6~17.04.1
  SourcePackage: gtk+3.0
  Title: package gtk-update-icon-cache (not installed) failed to 
install/upgrade: el subproceso script pre-installation nuevo devolvió el código 
de salida de error 2
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1741565/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741546] [NEW] Dell Inspiron 15 5567 laptops's default speaker does not play the bass in audio

[Ishan]

Public bug reported:

Dell Inspiron 15 5567 comes with Realtek ALC3246 audio chipset.
The sound card is perfect on Windows, very beautiful sound quality and sorround 
sound.
But in ubuntu 16.04 the bass does not play also the sound quality not so 
impressive to hear.

** Affects: alsa-driver (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: alsa audio dell

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1741546

Title:
  Dell Inspiron 15 5567 laptops's default speaker does not play the bass
  in audio

Status in alsa-driver package in Ubuntu:
  New

Bug description:
  Dell Inspiron 15 5567 comes with Realtek ALC3246 audio chipset.
  The sound card is perfect on Windows, very beautiful sound quality and 
sorround sound.
  But in ubuntu 16.04 the bass does not play also the sound quality not so 
impressive to hear.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1741546/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 463120] Re: Full laptop speakers are not used to play audio files

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: alsa-driver (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/463120

Title:
  Full laptop speakers are not used to play audio files

Status in alsa-driver package in Ubuntu:
  Confirmed

Bug description:
  I use a LENOVO Y 500 series laptop, it has a Bass function , which
  fine in windows os. But when playing music files in unbuntu, the sound
  is very low and for some reason the Bass is not activated. The Bass
  switch is on but the is no effect on the volume on the laptop
  speakers. The volume is very low as compared to when i play music in
  Vista. Plzz help

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/463120/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1674106] Re: gnome-terminal-server crashed with SIGSEGV in g_type_check_instance_is_a()

[Launchpad Bug Tracker]

*** This bug is a duplicate of bug 1438014 ***
https://bugs.launchpad.net/bugs/1438014

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gnome-terminal (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-terminal in Ubuntu.
https://bugs.launchpad.net/bugs/1674106

Title:
  gnome-terminal-server crashed with SIGSEGV in
  g_type_check_instance_is_a()

Status in gnome-terminal package in Ubuntu:
  Confirmed

Bug description:
  La aplicacion se cierra apenas trato de utilizarla

  ProblemType: Crash
  DistroRelease: Ubuntu 17.04
  Package: gnome-terminal 3.20.2-1ubuntu6
  ProcVersionSignature: Ubuntu 4.10.0-11.13-generic 4.10.1
  Uname: Linux 4.10.0-11-generic x86_64
  ApportVersion: 2.20.4-0ubuntu2
  Architecture: amd64
  Date: Sun Mar 19 09:52:29 2017
  ExecutablePath: /usr/lib/gnome-terminal/gnome-terminal-server
  InstallationDate: Installed on 2017-03-09 (9 days ago)
  InstallationMedia: Ubuntu 17.04 "Zesty Zapus" - Alpha amd64 (20170224)
  ProcCmdline: /usr/lib/gnome-terminal/gnome-terminal-server
  ProcEnviron:
   SHELL=/bin/bash
   PATH=(custom, no user)
   LANGUAGE=es_CO:es
   TERM=xterm-256color
   LANG=es_CO.UTF-8
  SegvAnalysis:
   Segfault happened at: 0x7f8454a8bfd1 :
testb  $0x4,0x16(%rax)
   PC (0x7f8454a8bfd1) ok
   source "$0x4" ok
   destination "0x16(%rax)" (0x7001e) not located in a known VMA region 
(needed writable region)!
  SegvReason: writing unknown VMA
  Signal: 11
  SourcePackage: gnome-terminal
  StacktraceTop:
   g_type_check_instance_is_a () from 
/usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0
   gtk_widget_get_toplevel () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   ?? () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   gtk_window_group_add_window () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
   gtk_window_set_transient_for () from /usr/lib/x86_64-linux-gnu/libgtk-3.so.0
  Title: gnome-terminal-server crashed with SIGSEGV in 
g_type_check_instance_is_a()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/1674106/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1727320] Re: Screen turn on/off 3 times and DP-1-3 connected but nothing is connected [latitude e7470]

[Dima Ryazanov]

Actually, I've upgraded to the 1.18.5 BIOS, but still seeing the bug.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/1727320

Title:
  Screen turn on/off 3 times and DP-1-3 connected but nothing is
  connected [latitude e7470]

Status in linux package in Ubuntu:
  Fix Released
Status in xserver-xorg-video-intel package in Ubuntu:
  Fix Released

Bug description:
  Gnome-shell crash and restart after the login and the screen flicker 1
  time (3 with wayland) in Ubuntu 17.10 with my DELL latitude e7470
  laptop.

  If I go in display settings I notice a second monitor Synaptics Inc
  24'' which doesn't exist in reality. In Wayland after the screen stop
  flickering I don't have any other problem and that monitor is not
  present there.

  xrandr | grep -i ' connected'
  eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y 
axis) 309mm x 174mm
  DP-1-3 connected (normal left inverted right x axis y axis) <-- I don't have 
anything connected to this port

  With Fedora 26 I don't have this problem but I'm not yet able to find what 
package is the culprit.
  I believe this problem is related to Displayport 1.2, I don't have any dock 
nor I need to connect more than 1 monitor and would be satisfied just having 
one interface.

  ProblemType: Crash
  DistroRelease: Ubuntu 17.10
  Package: gnome-shell 3.26.1-0ubuntu4
  ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
  Uname: Linux 4.13.0-16-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3
  Architecture: amd64
  CrashCounter: 1
  CurrentDesktop: GNOME-Greeter:GNOME
  Date: Wed Oct 25 11:46:16 2017
  DisplayManager: gdm3
  ExecutablePath: /usr/bin/gnome-shell
  GsettingsChanges:
   
  InstallationDate: Installed on 2017-10-19 (5 days ago)
  InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018)
  ProcCmdline: /usr/bin/gnome-shell
  Signal: 5
  SourcePackage: gnome-shell
  StacktraceTop:
   ?? () from /usr/lib/x86_64-linux-gnu/libmutter-1.so.0
   _XIOError () from /usr/lib/x86_64-linux-gnu/libX11.so.6
   _XEventsQueued () from /usr/lib/x86_64-linux-gnu/libX11.so.6
   XPending () from /usr/lib/x86_64-linux-gnu/libX11.so.6
   ?? () from /usr/lib/x86_64-linux-gnu/libgdk-3.so.0
  Title: gnome-shell crashed with signal 5 in _XIOError()
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1727320/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1674057] Re: [needs packaging] upgrade libzip to version 1.20

[Rik Mills]

** Also affects: libzip (Ubuntu Bionic)
   Importance: Wishlist
 Assignee: Stephen Hope (stevehope)
   Status: In Progress

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libzip in Ubuntu.
https://bugs.launchpad.net/bugs/1674057

Title:
  [needs packaging] upgrade libzip to version 1.20

Status in libzip package in Ubuntu:
  In Progress
Status in libzip source package in Bionic:
  In Progress

Bug description:
  Please consider upgrading libzip to the newest version (currently
  1.20). It comes with important changes (details here:
  https://nih.at/libzip/NEWS.html) and also it's used by ark since
  commit ee74c157daf3604277ffcf10d2a89b2b59556dd7:

  Add libzip plugin
  A new plugin for libzip was added. The plugin is only built if libzip
  1.20 or higher is installed, but is the preferred plugin for zip
  archives.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libzip/+bug/1674057/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1729728] Re: window picker is broken in 3.26

[Dmitry Shachnev]

** Description changed:

- WindowPicker seems to be broken in 3.26.
+ [Impact]
+ One of the applets shipped in gnome-applets package is broken. It crashes on 
startup because of missing GSettings schema file.
  
- It just crashes upon applet addition on fresh 17.10.
+ [Test Case]
+ * Log into GNOME Flashback session.
+ * Try to add the “Window picker” applet to the panel.
+ 
+ Expected result: panel does not crash, applet is added.
+ 
+ [Proposed Fix]
+ The proposed fix just makes the gsettings schema installed:
+ 
+ https://git.gnome.org/browse/gnome-applets/commit/?id=6aedbc3a6af54190
+ 
+ [Regression Potential]
+ None, as the fix just adds a missing file.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-applets in Ubuntu.
https://bugs.launchpad.net/bugs/1729728

Title:
  window picker is broken in 3.26

Status in gnome-applets package in Ubuntu:
  Fix Released
Status in gnome-applets source package in Artful:
  Confirmed

Bug description:
  [Impact]
  One of the applets shipped in gnome-applets package is broken. It crashes on 
startup because of missing GSettings schema file.

  [Test Case]
  * Log into GNOME Flashback session.
  * Try to add the “Window picker” applet to the panel.

  Expected result: panel does not crash, applet is added.

  [Proposed Fix]
  The proposed fix just makes the gsettings schema installed:

  https://git.gnome.org/browse/gnome-applets/commit/?id=6aedbc3a6af54190

  [Regression Potential]
  None, as the fix just adds a missing file.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-applets/+bug/1729728/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1674057] Re: [needs packaging] upgrade libzip to version 1.20

[Miha Vrhovnik]

The version shipping with ubuntu is prehistoric. It would be really nice
if the library is updated in upcoming 18.04 otherwise the LTS and all
components relying on libzip e.g PHP will ship with this version for the
next 5 years.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to libzip in Ubuntu.
https://bugs.launchpad.net/bugs/1674057

Title:
  [needs packaging] upgrade libzip to version 1.20

Status in libzip package in Ubuntu:
  In Progress

Bug description:
  Please consider upgrading libzip to the newest version (currently
  1.20). It comes with important changes (details here:
  https://nih.at/libzip/NEWS.html) and also it's used by ark since
  commit ee74c157daf3604277ffcf10d2a89b2b59556dd7:

  Add libzip plugin
  A new plugin for libzip was added. The plugin is only built if libzip
  1.20 or higher is installed, but is the preferred plugin for zip
  archives.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libzip/+bug/1674057/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741428] Re: Upstream version 52.5.2 fixing high-risk bugs not yet available in Ubuntu-repositories

[Hans Joachim Desserud]

** Tags added: upgrade-software-version

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/1741428

Title:
  Upstream version 52.5.2 fixing high-risk bugs not yet available in
  Ubuntu-repositories

Status in thunderbird package in Ubuntu:
  New

Bug description:
  On December 22, 2017 Mozilla released Thunderbird 52.5.2, fixing five
  security issues:

  https://www.mozilla.org/en-US/security/advisories/mfsa2017-30/

  The most severe of these bugs only affects Windows. However, the
  update also addresses two issues categorized as “high”, one
  “moderate”, and another one “low” risk, which seem to affect all
  platforms including Linux. Almost two weeks later, there is still no
  sign of this update arriving in the Ubuntu repositories.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/1741428/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1576559] Re: Refused to switch profile to headset_head_unit: Not connected

[varacanero]

Btw, I experience this issue with Ubuntu 17.10. I tried upgrading
pulseaudio to the bionic version but the problem persists.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1576559

Title:
  Refused to switch profile to headset_head_unit: Not connected

Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  I'm trying to connect a bluetooth-speaker-with-microphone (Mi
  Bluetooth Speaker) to Ubuntu. It works well as an A2DP sync, but can't
  use it as a headset with microphone.

  The device doesn't list in the "Input Devices" by default, and using
  the sound settings to change the profile of the device to HSP/HFP
  results in this log message:

  W: [pulseaudio] module-bluez5-device.c: Refused to switch profile to
  headset_head_unit: Not connected

  
  I'm running Ubuntu 16.04 LTS. I did an upgrade from Ubuntu 15.10.

  pulseaudio:
Installed: 1:8.0-0ubuntu3

  bluez:
Installed: 5.37-0ubuntu5

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1576559/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1576559] Re: Refused to switch profile to headset_head_unit: Not connected

[varacanero]

Also, how to find out which Headsets work and which not, before spending
the money and finding out they don't.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1576559

Title:
  Refused to switch profile to headset_head_unit: Not connected

Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  I'm trying to connect a bluetooth-speaker-with-microphone (Mi
  Bluetooth Speaker) to Ubuntu. It works well as an A2DP sync, but can't
  use it as a headset with microphone.

  The device doesn't list in the "Input Devices" by default, and using
  the sound settings to change the profile of the device to HSP/HFP
  results in this log message:

  W: [pulseaudio] module-bluez5-device.c: Refused to switch profile to
  headset_head_unit: Not connected

  
  I'm running Ubuntu 16.04 LTS. I did an upgrade from Ubuntu 15.10.

  pulseaudio:
Installed: 1:8.0-0ubuntu3

  bluez:
Installed: 5.37-0ubuntu5

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1576559/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1576559] Re: Refused to switch profile to headset_head_unit: Not connected

[varacanero]

I also spend hours on this issue trying to get a Logitech H800 headset working 
and finally gave up.
It would be at least nice to know what's the problem (pulseaudio ? bluez ? 
Headset ?) and if it's on the roadmap to fix it.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1576559

Title:
  Refused to switch profile to headset_head_unit: Not connected

Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  I'm trying to connect a bluetooth-speaker-with-microphone (Mi
  Bluetooth Speaker) to Ubuntu. It works well as an A2DP sync, but can't
  use it as a headset with microphone.

  The device doesn't list in the "Input Devices" by default, and using
  the sound settings to change the profile of the device to HSP/HFP
  results in this log message:

  W: [pulseaudio] module-bluez5-device.c: Refused to switch profile to
  headset_head_unit: Not connected

  
  I'm running Ubuntu 16.04 LTS. I did an upgrade from Ubuntu 15.10.

  pulseaudio:
Installed: 1:8.0-0ubuntu3

  bluez:
Installed: 5.37-0ubuntu5

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1576559/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1734960] Re: Bluetooth headset profile HSP/HFP doesn't work

[varacanero]

I think this is a duplicate of
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1576559.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1734960

Title:
  Bluetooth headset profile HSP/HFP doesn't work

Status in blueman package in Ubuntu:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  My bluetooth headphones Bluedio T2S has a microphone and support HSP/HFP 
profile, but when i try change sound profile in blueman-manager to HSP/HFP - 
then i get error "Failed to change profile to headset_head_unit".
  With profile a2dp headphones work good(clementine, chromium etc..), but I 
could not get work output headphones in steam games, i listen only silence(i 
think it's problem of pulseaudio)

  ProblemType: Bug
  DistroRelease: Ubuntu 17.04
  Package: pulseaudio 1:10.0-1ubuntu2
  ProcVersionSignature: Ubuntu 4.10.0-40.44-generic 4.10.17
  Uname: Linux 4.10.0-40-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.4-0ubuntu4.8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  pl7ofit3040 F pulseaudio
   /dev/snd/controlC1:  pl7ofit3040 F pulseaudio
  CurrentDesktop: MATE
  Date: Tue Nov 28 19:51:59 2017
  InstallationDate: Installed on 2016-06-22 (524 days ago)
  InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  SourcePackage: pulseaudio
  Symptom: audio
  Symptom_Card: Bluedio
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  pl7ofit3040 F pulseaudio
   /dev/snd/controlC1:  pl7ofit3040 F pulseaudio
  Symptom_Type: No sound at all
  Title: [Bluedio, recording] No sound at all
  UpgradeStatus: Upgraded to zesty on 2017-11-24 (4 days ago)
  dmi.bios.date: 07/08/2009
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: L2.38
  dmi.board.name: AM2NF6G-VSTA
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrL2.38:bd07/08/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnAM2NF6G-VSTA:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To Be Filled By O.E.M.
  dmi.product.version: To Be Filled By O.E.M.
  dmi.sys.vendor: To Be Filled By O.E.M.
  modified.conffile..etc.pulse.default.pa: [modified]
  mtime.conffile..etc.pulse.default.pa: 2017-11-24T19:23:23.458810

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1734960/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1734960] Re: Bluetooth headset profile HSP/HFP doesn't work

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: pulseaudio (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1734960

Title:
  Bluetooth headset profile HSP/HFP doesn't work

Status in blueman package in Ubuntu:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  My bluetooth headphones Bluedio T2S has a microphone and support HSP/HFP 
profile, but when i try change sound profile in blueman-manager to HSP/HFP - 
then i get error "Failed to change profile to headset_head_unit".
  With profile a2dp headphones work good(clementine, chromium etc..), but I 
could not get work output headphones in steam games, i listen only silence(i 
think it's problem of pulseaudio)

  ProblemType: Bug
  DistroRelease: Ubuntu 17.04
  Package: pulseaudio 1:10.0-1ubuntu2
  ProcVersionSignature: Ubuntu 4.10.0-40.44-generic 4.10.17
  Uname: Linux 4.10.0-40-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.4-0ubuntu4.8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  pl7ofit3040 F pulseaudio
   /dev/snd/controlC1:  pl7ofit3040 F pulseaudio
  CurrentDesktop: MATE
  Date: Tue Nov 28 19:51:59 2017
  InstallationDate: Installed on 2016-06-22 (524 days ago)
  InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  SourcePackage: pulseaudio
  Symptom: audio
  Symptom_Card: Bluedio
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  pl7ofit3040 F pulseaudio
   /dev/snd/controlC1:  pl7ofit3040 F pulseaudio
  Symptom_Type: No sound at all
  Title: [Bluedio, recording] No sound at all
  UpgradeStatus: Upgraded to zesty on 2017-11-24 (4 days ago)
  dmi.bios.date: 07/08/2009
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: L2.38
  dmi.board.name: AM2NF6G-VSTA
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrL2.38:bd07/08/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnAM2NF6G-VSTA:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To Be Filled By O.E.M.
  dmi.product.version: To Be Filled By O.E.M.
  dmi.sys.vendor: To Be Filled By O.E.M.
  modified.conffile..etc.pulse.default.pa: [modified]
  mtime.conffile..etc.pulse.default.pa: 2017-11-24T19:23:23.458810

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1734960/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1737289] Re: Bluetooth profile will not change when selected to enable microphone on headset

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: alsa-driver (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1737289

Title:
  Bluetooth profile will not change when selected to enable microphone
  on headset

Status in alsa-driver package in Ubuntu:
  Confirmed

Bug description:
  I have a bluetooth headset that supports a2dp as well as HSP/HFP
  profiles.  The headset launches in a2dp and you can select hsp/hfp but
  it never changes the profile and activates the microphone

  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  ProcVersionSignature: Ubuntu 4.13.0-19.22-generic 4.13.13
  Uname: Linux 4.13.0-19-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.7-0ubuntu3.6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  sbarcomb   2192 F pulseaudio
  CurrentDesktop: ubuntu:GNOME
  Date: Fri Dec  8 23:15:07 2017
  InstallationDate: Installed on 2017-10-19 (50 days ago)
  InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018)
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_Card: Stephen s Beats Studio
  Symptom_Type: None of the above
  Title: [Stephen s Beats Studio, recording] Recording problem
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/26/2013
  dmi.bios.vendor: Alienware
  dmi.bios.version: A11
  dmi.board.name: 07JNH0
  dmi.board.vendor: Alienware
  dmi.board.version: A02
  dmi.chassis.type: 3
  dmi.chassis.vendor: Alienware
  dmi.chassis.version: 00
  dmi.modalias: 
dmi:bvnAlienware:bvrA11:bd11/26/2013:svnAlienware:pnAurora-R4:pvr00:rvnAlienware:rn07JNH0:rvrA02:cvnAlienware:ct3:cvr00:
  dmi.product.family: 0
  dmi.product.name: Aurora-R4
  dmi.product.version: 00
  dmi.sys.vendor: Alienware

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1737289/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1737289] Re: Bluetooth profile will not change when selected to enable microphone on headset

[varacanero]

I think this is a duplicate of
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1576559.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1737289

Title:
  Bluetooth profile will not change when selected to enable microphone
  on headset

Status in alsa-driver package in Ubuntu:
  Confirmed

Bug description:
  I have a bluetooth headset that supports a2dp as well as HSP/HFP
  profiles.  The headset launches in a2dp and you can select hsp/hfp but
  it never changes the profile and activates the microphone

  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: alsa-base 1.0.25+dfsg-0ubuntu5
  ProcVersionSignature: Ubuntu 4.13.0-19.22-generic 4.13.13
  Uname: Linux 4.13.0-19-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.7-0ubuntu3.6
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  sbarcomb   2192 F pulseaudio
  CurrentDesktop: ubuntu:GNOME
  Date: Fri Dec  8 23:15:07 2017
  InstallationDate: Installed on 2017-10-19 (50 days ago)
  InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018)
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: alsa-driver
  Symptom: audio
  Symptom_Card: Stephen s Beats Studio
  Symptom_Type: None of the above
  Title: [Stephen s Beats Studio, recording] Recording problem
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/26/2013
  dmi.bios.vendor: Alienware
  dmi.bios.version: A11
  dmi.board.name: 07JNH0
  dmi.board.vendor: Alienware
  dmi.board.version: A02
  dmi.chassis.type: 3
  dmi.chassis.vendor: Alienware
  dmi.chassis.version: 00
  dmi.modalias: 
dmi:bvnAlienware:bvrA11:bd11/26/2013:svnAlienware:pnAurora-R4:pvr00:rvnAlienware:rn07JNH0:rvrA02:cvnAlienware:ct3:cvr00:
  dmi.product.family: 0
  dmi.product.name: Aurora-R4
  dmi.product.version: 00
  dmi.sys.vendor: Alienware

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1737289/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1734960] Re: Bluetooth headset profile HSP/HFP doesn't work

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: blueman (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1734960

Title:
  Bluetooth headset profile HSP/HFP doesn't work

Status in blueman package in Ubuntu:
  Confirmed
Status in pulseaudio package in Ubuntu:
  Confirmed

Bug description:
  My bluetooth headphones Bluedio T2S has a microphone and support HSP/HFP 
profile, but when i try change sound profile in blueman-manager to HSP/HFP - 
then i get error "Failed to change profile to headset_head_unit".
  With profile a2dp headphones work good(clementine, chromium etc..), but I 
could not get work output headphones in steam games, i listen only silence(i 
think it's problem of pulseaudio)

  ProblemType: Bug
  DistroRelease: Ubuntu 17.04
  Package: pulseaudio 1:10.0-1ubuntu2
  ProcVersionSignature: Ubuntu 4.10.0-40.44-generic 4.10.17
  Uname: Linux 4.10.0-40-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.4-0ubuntu4.8
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  pl7ofit3040 F pulseaudio
   /dev/snd/controlC1:  pl7ofit3040 F pulseaudio
  CurrentDesktop: MATE
  Date: Tue Nov 28 19:51:59 2017
  InstallationDate: Installed on 2016-06-22 (524 days ago)
  InstallationMedia: Ubuntu-MATE 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  SourcePackage: pulseaudio
  Symptom: audio
  Symptom_Card: Bluedio
  Symptom_DevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  pl7ofit3040 F pulseaudio
   /dev/snd/controlC1:  pl7ofit3040 F pulseaudio
  Symptom_Type: No sound at all
  Title: [Bluedio, recording] No sound at all
  UpgradeStatus: Upgraded to zesty on 2017-11-24 (4 days ago)
  dmi.bios.date: 07/08/2009
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: L2.38
  dmi.board.name: AM2NF6G-VSTA
  dmi.board.vendor: ASRock
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: To Be Filled By O.E.M.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrL2.38:bd07/08/2009:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnAM2NF6G-VSTA:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To Be Filled By O.E.M.
  dmi.product.version: To Be Filled By O.E.M.
  dmi.sys.vendor: To Be Filled By O.E.M.
  modified.conffile..etc.pulse.default.pa: [modified]
  mtime.conffile..etc.pulse.default.pa: 2017-11-24T19:23:23.458810

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/blueman/+bug/1734960/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1733421] Re: bbswitch-dkms 0.8-3ubuntu1: bbswitch kernel module failed to build. Occured at boot

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: bbswitch (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to bbswitch in Ubuntu.
https://bugs.launchpad.net/bugs/1733421

Title:
  bbswitch-dkms 0.8-3ubuntu1: bbswitch kernel module failed to build.
  Occured at boot

Status in bbswitch package in Ubuntu:
  Confirmed

Bug description:
  I was having issues with plotting with SciLab and rebooted my PC to
  see whether that would help but that resulted in a series of crashes.

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: bbswitch-dkms 0.8-3ubuntu1
  Uname: Linux 4.9.0-040900-generic x86_64
  NonfreeKernelModules: sep4_0 socperf2_0 pax nvidia_uvm nvidia_drm 
nvidia_modeset nvidia
  ApportVersion: 2.20.1-0ubuntu2.12
  Architecture: amd64
  DKMSKernelVersion: 4.4.0-101-generic
  Date: Mon Nov 20 18:43:36 2017
  InstallationDate: Installed on 2016-12-28 (327 days ago)
  InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  PackageVersion: 0.8-3ubuntu1
  RelatedPackageVersions:
   dpkg 1.18.4ubuntu1.2
   apt  1.2.24
  SourcePackage: bbswitch
  Title: bbswitch-dkms 0.8-3ubuntu1: bbswitch kernel module failed to build
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bbswitch/+bug/1733421/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1692316] Re: can't delete printer

[Dmitry Myachin]

Solving:

sudo /etc/init.d/cups stop
sudo nano -B /etc/cups/printers.conf

Remove printer from .conf

sudo /etc/init.d/cups start

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1692316

Title:
  can't delete printer

Status in cups package in Ubuntu:
  Confirmed

Bug description:
  Trying to delete a printer through either system-config-printer or
  http://localhost:631/printers. Both claim that the printer was
  deleted, but it doesn't go away.  Cups logs:

  localhost - root [21/May/2017:08:58:17 -0400] "POST /admin/ HTTP/1.1" 200 103 
- -
  localhost - root [21/May/2017:08:58:17 -0400] "POST /admin/ HTTP/1.1" 200 
2329 - -
  localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 126 
- -
  localhost - - [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 401 142 
CUPS-Delete-Printer successful-ok
  localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 142 
CUPS-Delete-Printer successful-ok
  localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 996 
CUPS-Add-Modify-Printer successful-ok
  localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 199 
CUPS-Add-Modify-Printer successful-ok
  localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 
2072 - -

  But again, despite the "CUPS-Delete-Printer-successful-ok", it's not
  actually deleted.

  In system-config-printer, when I try this multiple times, I _might_
  see the printer briefly disappear from the printer listing, but then
  it comes back.

  Other printers I create to test what's going on here, I am able to
  delete. Just not this one.

  I will attach my /etc/cups/printers.conf.

  ProblemType: Bug
  DistroRelease: Ubuntu 17.04
  Package: cups 2.2.2-1ubuntu1
  ProcVersionSignature: Ubuntu 4.10.0-20.22-generic 4.10.8
  Uname: Linux 4.10.0-20-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.4-0ubuntu4
  Architecture: amd64
  CurrentDesktop: Unity:Unity7
  Date: Sun May 21 08:58:32 2017
  InstallationDate: Installed on 2016-01-16 (491 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  KernLog: [950067.827005] audit: type=1400 audit(1495370264.565:45): 
apparmor="DENIED" operation="sendmsg" profile="/usr/bin/evince" 
name="/run/systemd/journal/socket" pid=18730 comm="evince" requested_mask="w" 
denied_mask="w" fsuid=1000 ouid=0
  Lpstat:
   device for duplex: socket://m551dn:9100
   device for HP-LaserJet-500-color-M551: ipp://m551dn.local:631/ipp/print
   device for simplex: socket://m551dn:9100
  MachineType: Acer Predator G6-710
  Papersize: letter
  PpdFiles:
   duplex: HP LaserJet 500 color M551 Postscript (recommended)
   simplex: HP LaserJet 500 color M551 Postscript (recommended)
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.10.0-20-generic.efi.signed 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  SourcePackage: cups
  UpgradeStatus: Upgraded to zesty on 2017-04-14 (36 days ago)
  dmi.bios.date: 05/18/2016
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: R01-A4
  dmi.board.name: Predator G6-710
  dmi.board.vendor: Acer
  dmi.chassis.type: 3
  dmi.chassis.vendor: Acer
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrR01-A4:bd05/18/2016:svnAcer:pnPredatorG6-710:pvr:rvnAcer:rnPredatorG6-710:rvr:cvnAcer:ct3:cvr:
  dmi.product.name: Predator G6-710
  dmi.sys.vendor: Acer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1692316/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1692316] Re: can't delete printer

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: cups (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups in Ubuntu.
https://bugs.launchpad.net/bugs/1692316

Title:
  can't delete printer

Status in cups package in Ubuntu:
  Confirmed

Bug description:
  Trying to delete a printer through either system-config-printer or
  http://localhost:631/printers. Both claim that the printer was
  deleted, but it doesn't go away.  Cups logs:

  localhost - root [21/May/2017:08:58:17 -0400] "POST /admin/ HTTP/1.1" 200 103 
- -
  localhost - root [21/May/2017:08:58:17 -0400] "POST /admin/ HTTP/1.1" 200 
2329 - -
  localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 126 
- -
  localhost - - [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 401 142 
CUPS-Delete-Printer successful-ok
  localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 142 
CUPS-Delete-Printer successful-ok
  localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 996 
CUPS-Add-Modify-Printer successful-ok
  localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 199 
CUPS-Add-Modify-Printer successful-ok
  localhost - root [21/May/2017:08:58:18 -0400] "POST /admin/ HTTP/1.1" 200 
2072 - -

  But again, despite the "CUPS-Delete-Printer-successful-ok", it's not
  actually deleted.

  In system-config-printer, when I try this multiple times, I _might_
  see the printer briefly disappear from the printer listing, but then
  it comes back.

  Other printers I create to test what's going on here, I am able to
  delete. Just not this one.

  I will attach my /etc/cups/printers.conf.

  ProblemType: Bug
  DistroRelease: Ubuntu 17.04
  Package: cups 2.2.2-1ubuntu1
  ProcVersionSignature: Ubuntu 4.10.0-20.22-generic 4.10.8
  Uname: Linux 4.10.0-20-generic x86_64
  NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
  ApportVersion: 2.20.4-0ubuntu4
  Architecture: amd64
  CurrentDesktop: Unity:Unity7
  Date: Sun May 21 08:58:32 2017
  InstallationDate: Installed on 2016-01-16 (491 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  KernLog: [950067.827005] audit: type=1400 audit(1495370264.565:45): 
apparmor="DENIED" operation="sendmsg" profile="/usr/bin/evince" 
name="/run/systemd/journal/socket" pid=18730 comm="evince" requested_mask="w" 
denied_mask="w" fsuid=1000 ouid=0
  Lpstat:
   device for duplex: socket://m551dn:9100
   device for HP-LaserJet-500-color-M551: ipp://m551dn.local:631/ipp/print
   device for simplex: socket://m551dn:9100
  MachineType: Acer Predator G6-710
  Papersize: letter
  PpdFiles:
   duplex: HP LaserJet 500 color M551 Postscript (recommended)
   simplex: HP LaserJet 500 color M551 Postscript (recommended)
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.10.0-20-generic.efi.signed 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
  SourcePackage: cups
  UpgradeStatus: Upgraded to zesty on 2017-04-14 (36 days ago)
  dmi.bios.date: 05/18/2016
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: R01-A4
  dmi.board.name: Predator G6-710
  dmi.board.vendor: Acer
  dmi.chassis.type: 3
  dmi.chassis.vendor: Acer
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrR01-A4:bd05/18/2016:svnAcer:pnPredatorG6-710:pvr:rvnAcer:rnPredatorG6-710:rvr:cvnAcer:ct3:cvr:
  dmi.product.name: Predator G6-710
  dmi.sys.vendor: Acer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1692316/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1735363] Re: inkscape: Port to Python 3

[Alex Valavanis]

@Hachmann - Thanks for the gitlab link to su_v's work.  Do you know what
the status of the fork is?  Is there a wiki page/bug report tracking the
migration?

It would be good to get this merged as soon as possible, as the fork is
6 months behind master.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to inkscape in Ubuntu.
https://bugs.launchpad.net/bugs/1735363

Title:
  inkscape: Port to Python 3

Status in Inkscape:
  Triaged
Status in inkscape package in Ubuntu:
  New
Status in inkscape package in Debian:
  Confirmed

Bug description:
  inkscape: Use/Port of Python3 needed, or considering demotion.

  Currently seeded in usb (???), owned by desktop-packages.

To manage notifications about this bug go to:
https://bugs.launchpad.net/inkscape/+bug/1735363/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1735363] Re: inkscape: Port to Python 3

[Alex Valavanis]

** Changed in: inkscape
   Importance: Undecided => Medium

** Changed in: inkscape
   Status: New => Triaged

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to inkscape in Ubuntu.
https://bugs.launchpad.net/bugs/1735363

Title:
  inkscape: Port to Python 3

Status in Inkscape:
  Triaged
Status in inkscape package in Ubuntu:
  New
Status in inkscape package in Debian:
  Confirmed

Bug description:
  inkscape: Use/Port of Python3 needed, or considering demotion.

  Currently seeded in usb (???), owned by desktop-packages.

To manage notifications about this bug go to:
https://bugs.launchpad.net/inkscape/+bug/1735363/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1726224] Re: wacom invisible mouse pointer in wayland

[Erwyn]

Just to add some information on this on the cursor disappearance topic.
If I hit the "windows" button the one that open the application/windows
browsing of gnome shell and I move the stylus on the tablet the pointer
is there. Same thing if I Alt+Tab. But I soon as I leave one or the
other, cursor is not there and the only quickfix yet is unplugging and
plugging back the tablet as suggested before.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1726224

Title:
  wacom invisible mouse pointer in wayland

Status in GNOME Shell:
  Confirmed
Status in gnome-shell package in Ubuntu:
  Triaged
Status in xorg-server package in Ubuntu:
  Confirmed

Bug description:
  After upgrading to Ubuntu 17.10, I connected my Wacom Intuos tablet,
  which has touch and pen functionality.

  Controlling the mouse pointer through the touch functionality seems to
  work fine, but using the stylus produced very strange behaviour,
  depending the program.

  - With Firefox there there are two pointers - one that is moving in
  accordance with the stylus movements, and one stays put at the
  position, when the stylus movement was detected.

  - With Darktable the mouse pointer becomes invisible, once it's moved
  inside of the application window (it registers clicks though). Once
  the pointer is moved outside of the application window, it appears
  again.

  I'm running Ubuntu inside of a wayland session.

  libwacom2: 0.24-1

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-shell/+bug/1726224/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1729728] Re: window picker is broken in 3.26

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gnome-applets (Ubuntu Artful)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-applets in Ubuntu.
https://bugs.launchpad.net/bugs/1729728

Title:
  window picker is broken in 3.26

Status in gnome-applets package in Ubuntu:
  Fix Released
Status in gnome-applets source package in Artful:
  Confirmed

Bug description:
  WindowPicker seems to be broken in 3.26.

  It just crashes upon applet addition on fresh 17.10.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-applets/+bug/1729728/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741481] [NEW] package network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3 failed to install/upgrade: le sous-processus script post-installation installé a retourné une e

[KAORE Jean Marie]

Public bug reported:

when i try to update

ProblemType: Package
DistroRelease: Ubuntu 17.10
Package: network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3
ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
Uname: Linux 4.13.0-16-generic x86_64
ApportVersion: 2.20.7-0ubuntu3
Architecture: amd64
Date: Fri Jan  5 14:09:58 2018
ErrorMessage: le sous-processus script post-installation installé a retourné 
une erreur de sortie d'état 1
InstallationDate: Installed on 2018-01-05 (0 days ago)
InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Release amd64 
(20171017.1)
IpRoute:
 default via 192.168.109.1 dev enp1s0 proto dhcp src 192.168.109.111 metric 100 
 192.168.109.0/24 dev enp1s0 proto kernel scope link src 192.168.109.111 
 192.168.109.1 dev enp1s0 proto dhcp scope link src 192.168.109.111 metric 100
IwConfig:
 lono wireless extensions.
 
 enp1s0no wireless extensions.
PackageArchitecture: all
Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 
3.6.3-0ubuntu2
PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 
2.7.14-2ubuntu1
RelatedPackageVersions:
 dpkg 1.18.24ubuntu1
 apt  1.5.1
RfKill:
 
SourcePackage: network-manager
Title: package network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3 failed 
to install/upgrade: le sous-processus script post-installation installé a 
retourné une erreur de sortie d'état 1
UpgradeStatus: No upgrade log present (probably fresh install)
nmcli-con: Error: command ['nmcli', '-f', 'all', 'con'] failed with exit code 
8: Error: NetworkManager is not running.
nmcli-dev: Error: command ['nmcli', '-f', 'all', 'dev'] failed with exit code 
8: Error: NetworkManager is not running.
nmcli-nm: Error: command ['nmcli', '-f', 'all', 'gen'] failed with exit code 8: 
Error: NetworkManager is not running.

** Affects: network-manager (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package artful

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1741481

Title:
  package network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3
  failed to install/upgrade: le sous-processus script post-installation
  installé a retourné une erreur de sortie d'état 1

Status in network-manager package in Ubuntu:
  New

Bug description:
  when i try to update

  ProblemType: Package
  DistroRelease: Ubuntu 17.10
  Package: network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3
  ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
  Uname: Linux 4.13.0-16-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3
  Architecture: amd64
  Date: Fri Jan  5 14:09:58 2018
  ErrorMessage: le sous-processus script post-installation installé a retourné 
une erreur de sortie d'état 1
  InstallationDate: Installed on 2018-01-05 (0 days ago)
  InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Release amd64 
(20171017.1)
  IpRoute:
   default via 192.168.109.1 dev enp1s0 proto dhcp src 192.168.109.111 metric 
100 
   192.168.109.0/24 dev enp1s0 proto kernel scope link src 192.168.109.111 
   192.168.109.1 dev enp1s0 proto dhcp scope link src 192.168.109.111 metric 100
  IwConfig:
   lono wireless extensions.
   
   enp1s0no wireless extensions.
  PackageArchitecture: all
  Python3Details: /usr/bin/python3.6, Python 3.6.3, python3-minimal, 
3.6.3-0ubuntu2
  PythonDetails: /usr/bin/python2.7, Python 2.7.14, python-minimal, 
2.7.14-2ubuntu1
  RelatedPackageVersions:
   dpkg 1.18.24ubuntu1
   apt  1.5.1
  RfKill:
   
  SourcePackage: network-manager
  Title: package network-manager-config-connectivity-ubuntu 1.8.4-1ubuntu3 
failed to install/upgrade: le sous-processus script post-installation installé 
a retourné une erreur de sortie d'état 1
  UpgradeStatus: No upgrade log present (probably fresh install)
  nmcli-con: Error: command ['nmcli', '-f', 'all', 'con'] failed with exit code 
8: Error: NetworkManager is not running.
  nmcli-dev: Error: command ['nmcli', '-f', 'all', 'dev'] failed with exit code 
8: Error: NetworkManager is not running.
  nmcli-nm: Error: command ['nmcli', '-f', 'all', 'gen'] failed with exit code 
8: Error: NetworkManager is not running.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1741481/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741468] Re: Broken GUI in Ubuntu MATE Live Session

[Ubuntu QA Website]

This bug has been reported on the Ubuntu ISO testing tracker.

A list of all reports related to this bug can be found here:
http://iso.qa.ubuntu.com/qatracker/reports/bugs/1741468

** Tags added: iso-testing

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1741468

Title:
  Broken GUI in Ubuntu MATE Live Session

Status in xorg package in Ubuntu:
  New

Bug description:
  Device: MacBook Air, late 2013

  
  -The toolbar on the top and the bottom loads, but they seem to be images only.

  -I cannot click on the Applications, Places, System, Firefox, or MATE
  Welcome, nor the power button on the top bar.

  -The Bottom bar's show desktop and switch desktop does not click
  either.

  -My cursor shows and tracks, but it does not seem to register clicks.
  This is both with a mouse and a trackpad.

  -Background image is black.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1741468/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1726224] Re: wacom invisible mouse pointer in wayland

[Erwyn]

Hello, Here to confirm cursor disappearance and system freeze. I have a
Wacom Intuos Comic Small. Also buttons are not properly detected I have
some mismatching in there (between what is shown in the settings and the
one actually pressed on the tablet). Funny thing is, mismatched is not
the same on Wayland and Xorg

Also, on Xorg the touch detection (right click/scrolling) is really
awful while it works pretty well on Wayland...

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg-server in Ubuntu.
https://bugs.launchpad.net/bugs/1726224

Title:
  wacom invisible mouse pointer in wayland

Status in GNOME Shell:
  Confirmed
Status in gnome-shell package in Ubuntu:
  Triaged
Status in xorg-server package in Ubuntu:
  Confirmed

Bug description:
  After upgrading to Ubuntu 17.10, I connected my Wacom Intuos tablet,
  which has touch and pen functionality.

  Controlling the mouse pointer through the touch functionality seems to
  work fine, but using the stylus produced very strange behaviour,
  depending the program.

  - With Firefox there there are two pointers - one that is moving in
  accordance with the stylus movements, and one stays put at the
  position, when the stylus movement was detected.

  - With Darktable the mouse pointer becomes invisible, once it's moved
  inside of the application window (it registers clicks though). Once
  the pointer is moved outside of the application window, it appears
  again.

  I'm running Ubuntu inside of a wayland session.

  libwacom2: 0.24-1

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-shell/+bug/1726224/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741468] [NEW] Broken GUI in Ubuntu MATE Live Session

[Jacob Kim]

Public bug reported:

Device: MacBook Air, late 2013


-The toolbar on the top and the bottom loads, but they seem to be images only.

-I cannot click on the Applications, Places, System, Firefox, or MATE
Welcome, nor the power button on the top bar.

-The Bottom bar's show desktop and switch desktop does not click either.

-My cursor shows and tracks, but it does not seem to register clicks.
This is both with a mouse and a trackpad.

-Background image is black.

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1741468

Title:
  Broken GUI in Ubuntu MATE Live Session

Status in xorg package in Ubuntu:
  New

Bug description:
  Device: MacBook Air, late 2013

  
  -The toolbar on the top and the bottom loads, but they seem to be images only.

  -I cannot click on the Applications, Places, System, Firefox, or MATE
  Welcome, nor the power button on the top bar.

  -The Bottom bar's show desktop and switch desktop does not click
  either.

  -My cursor shows and tracks, but it does not seem to register clicks.
  This is both with a mouse and a trackpad.

  -Background image is black.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1741468/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1726112] Re: akonadi-backend-postgresql missing in 17.10

[Ferry Toth]

Any activity on this?

The package is also missing in akonadi (4:17.08.3-0ubuntu2) bionic

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to akonadi in Ubuntu.
https://bugs.launchpad.net/bugs/1726112

Title:
  akonadi-backend-postgresql missing in 17.10

Status in akonadi package in Ubuntu:
  New

Bug description:
  Package missing

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/akonadi/+bug/1726112/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1491073] Re: Invalid data message while opening a file

[Paul Larsen]

+1, I am also affected. 
Ubuntu 17.10, Transmission 2.92 (14714)

Message says torrent is invalid, but the add torrent screen appears
anyway, and the torrent downloads fine.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to transmission in Ubuntu.
https://bugs.launchpad.net/bugs/1491073

Title:
  Invalid data message while opening a file

Status in transmission package in Ubuntu:
  Fix Released

Bug description:
  When I open any file in Transmission I get message that file contain
  invalid data, but I can open torrent file anyway when I close the
  message. I think that this is a bug because this happen to every file
  I open.

  transmission-gtk 2.84 (14307)
  Xubuntu 13.04

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/transmission/+bug/1491073/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1616332] Re: gnome-software using hundreds of MB of memory when not in use

[Bernat Guillen]

I'm also affected by this bug. Sometimes it starts consuming memory (I
have 8GB, usually 6GB free) and devours swap as well. Only solution then
is to do a hard restart, which can be problematic if I have a simulation
running.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-software in Ubuntu.
https://bugs.launchpad.net/bugs/1616332

Title:
  gnome-software using hundreds of MB of memory when not in use

Status in gnome-software package in Ubuntu:
  Triaged

Bug description:
  It seems gnome-software is running in the background all the time. Not
  a big deal if it was lightweight, but it seems to use hundreds of MB
  (from smem output):

PID User Command Swap  USS  PSS  
RSS 
   2291 jan  /usr/bin/gnome-software --g   285436   112576   117982   
134036 

  A total of over 400MB in RAM and swap combined.

  After killing and restarting, it takes "only" a bit over 100MB.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: gnome-software 
3.20.1+git20160617.1.0440874.ubuntu-xenial-0ubuntu1~16.04.1
  ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10
  Uname: Linux 4.4.0-24-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Aug 24 09:45:53 2016
  InstallationDate: Installed on 2012-11-10 (1382 days ago)
  InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
  SourcePackage: gnome-software
  UpgradeStatus: Upgraded to xenial on 2016-06-19 (65 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1616332/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1727765] Re: Please upgrade to 5.4 (Using Ubuntu 17.10)

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: mono (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to mono in Ubuntu.
https://bugs.launchpad.net/bugs/1727765

Title:
  Please upgrade to 5.4  (Using Ubuntu 17.10)

Status in mono package in Ubuntu:
  Confirmed

Bug description:
  Please upgrade to 5.4

  (Using Ubuntu 17.10)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mono/+bug/1727765/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741459] [NEW] package firefox 51.0.1+build2-0ubuntu0.16.04.2 [modified: usr/lib/firefox/browser/blocklist.xml usr/lib/firefox/browser/chrome.manifest usr/lib/firefox/browser/f

[ranit]

Public bug reported:

Current version of firefox is also not launching

ProblemType: Package
DistroRelease: Ubuntu 16.04
ProcVersionSignature: Ubuntu 4.4.0-72.93-generic 4.4.49
Uname: Linux 4.4.0-72-generic x86_64
AddonCompatCheckDisabled: False
ApportVersion: 2.20.1-0ubuntu2.5
AptOrdering:
 firefox: Purge
 NULL: ConfigurePending
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC1:  montu  1924 F pulseaudio
 /dev/snd/controlC0:  montu  1924 F pulseaudio
BuildID: 20170201180315
Channel: Unavailable
Date: Fri Jan  5 16:35:39 2018
DpkgHistoryLog:
 Start-Date: 2018-01-05  16:35:39
 Commandline: apt-get purge firefox
 Requested-By: montu (1000)
 Purge: firefox:amd64 (51.0.1+build2-0ubuntu0.16.04.2)
DpkgTerminalLog:
 dpkg: error processing package firefox (--purge):
  package is in a very bad inconsistent state; you should
  reinstall it before attempting a removal
ErrorMessage: package is in a very bad inconsistent state; you should  
reinstall it before attempting a removal
ForcedLayersAccel: False
IfupdownConfig:
 # interfaces(5) file used by ifup(8) and ifdown(8)
 auto lo
 iface lo inet loopback
InstallationDate: Installed on 2017-02-14 (324 days ago)
InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719)
IpRoute:
 default via 192.168.43.1 dev wlp8s0  proto static  metric 600 
 10.0.6.0/24 dev anboxbr0  proto kernel  scope link  src 10.0.6.1 linkdown 
 169.254.0.0/16 dev anboxbr0  scope link  metric 1000 linkdown 
 192.168.43.0/24 dev wlp8s0  proto kernel  scope link  src 192.168.43.152  
metric 600
NoProfiles: True
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
 dpkg 1.18.4ubuntu1.1
 apt  1.2.19
RunningIncompatibleAddons: False
SourcePackage: firefox
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 08/12/2015
dmi.bios.vendor: LENOVO
dmi.bios.version: 9ECN43WW(V3.03)
dmi.board.asset.tag: NO DPK
dmi.board.name: Lenovo Y50-70
dmi.board.vendor: LENOVO
dmi.board.version: NO DPK
dmi.chassis.asset.tag: NO DPK
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Lenovo Y50-70
dmi.modalias: 
dmi:bvnLENOVO:bvr9ECN43WW(V3.03):bd08/12/2015:svnLENOVO:pn20378:pvrLenovoY50-70:rvnLENOVO:rnLenovoY50-70:rvrNODPK:cvnLENOVO:ct10:cvrLenovoY50-70:
dmi.product.name: 20378
dmi.product.version: Lenovo Y50-70
dmi.sys.vendor: LENOVO

** Affects: firefox (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package xenial

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to firefox in Ubuntu.
https://bugs.launchpad.net/bugs/1741459

Title:
  package firefox 51.0.1+build2-0ubuntu0.16.04.2 [modified:
  usr/lib/firefox/browser/blocklist.xml
  usr/lib/firefox/browser/chrome.manifest
  usr/lib/firefox/browser/features/aushel...@mozilla.org.xpi
  usr/lib/firefox/browser/features/e10sroll...@mozilla.org.xpi
  usr/lib/firefox/browser/features/fire...@getpocket.com.xpi
  usr/lib/firefox/browser/features/webcom...@mozilla.org.xpi
  usr/lib/firefox/browser/omni.ja usr/lib/firefox/crashreporter
  usr/lib/firefox/dependentlibs.list usr/lib/firefox/firefox
  usr/lib/firefox/gmp-clearkey/0.1/libclearkey.so
  usr/lib/firefox/gtk2/libmozgtk.so usr/lib/firefox/libfreeblpriv3.chk
  usr/lib/firefox/libfreeblpriv3.so usr/lib/firefox/libmozavutil.so
  usr/lib/firefox/libmozgtk.so usr/lib/firefox/libmozsqlite3.so
  usr/lib/firefox/libnspr4.so usr/lib/firefox/libnssckbi.so
  usr/lib/firefox/libnssdbm3.chk usr/lib/firefox/libnssutil3.so
  usr/lib/firefox/libplds4.so usr/lib/firefox/libsoftokn3.chk
  usr/lib/firefox/libsoftokn3.so usr/lib/firefox/libxul.so
  usr/lib/firefox/omni.ja usr/lib/firefox/plugin-container
  usr/share/doc/firefox/changelog.Debian.gz] failed to install/upgrade:
  package is in a very bad inconsistent state; you should  reinstall it
  before attempting a removal

Status in firefox package in Ubuntu:
  New

Bug description:
  Current version of firefox is also not launching

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  ProcVersionSignature: Ubuntu 4.4.0-72.93-generic 4.4.49
  Uname: Linux 4.4.0-72-generic x86_64
  AddonCompatCheckDisabled: False
  ApportVersion: 2.20.1-0ubuntu2.5
  AptOrdering:
   firefox: Purge
   NULL: ConfigurePending
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  montu  1924 F pulseaudio
   /dev/snd/controlC0:  montu  1924 F pulseaudio
  BuildID: 20170201180315
  Channel: Unavailable
  Date: Fri Jan  5 16:35:39 2018
  DpkgHistoryLog:
   Start-Date: 2018-01-05  16:35:39
   Commandline: apt-get purge firefox
   Requested-By: montu (1000)
   Purge: firefox:amd64 (51.0.1+build2-0ubuntu0.16.04.2)
  DpkgTerminalLog:
   dpkg: error processing package firefox (--purge):
package is in a very bad 

[Desktop-packages] [Bug 1739625] Re: Mouse events pass through pure Wayland windows

[Daniel van Vugt]

OK, I have a fix on the way upstream:
https://bugzilla.gnome.org/show_bug.cgi?id=790309

We'll try to get it into Ubuntu ASAP.

** No longer affects: gnome-shell (Ubuntu)

** Tags added: wayland

** Summary changed:

- Mouse events pass through pure Wayland windows
+ Mouse events pass through pure Wayland windows (that use wl_shell)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/1739625

Title:
  Mouse events pass through pure Wayland windows (that use wl_shell)

Status in Mutter:
  Confirmed
Status in mutter package in Ubuntu:
  In Progress

Bug description:
* When I run 'mpv', the video player, and I click on the main window with 
my mouse, the click goes through and select whatever window was behind.
* The same thing happens if I build a SDL tutorial and start it with 
SDL_VIDEODRIVER=wayland.
* The same thing happens if I build this Wayland tutorial: 
https://github.com/hdante/hello_wayland
* The same thing with Jan Newmarch's Wayland tutorial examples.

  These different cases lead me to believe that the problem lies in
  Gnome Wayland compositor and not in these programs.

  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: gnome-shell 3.26.2-0ubuntu0.1
  ProcVersionSignature: Ubuntu 4.13.0-19.22-generic 4.13.13
  Uname: Linux 4.13.0-19-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.6
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  Date: Thu Dec 21 15:47:50 2017
  DisplayManager: gdm3
  InstallationDate: Installed on 2017-10-02 (79 days ago)
  InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Alpha amd64 (20170926)
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-shell
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/mutter/+bug/1739625/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1739625] Re: Mouse events pass through pure Wayland windows

[Bug Watch Updater]

** Changed in: mutter
   Status: Unknown => Confirmed

** Changed in: mutter
   Importance: Unknown => Medium

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/1739625

Title:
  Mouse events pass through pure Wayland windows

Status in Mutter:
  Confirmed
Status in gnome-shell package in Ubuntu:
  In Progress
Status in mutter package in Ubuntu:
  In Progress

Bug description:
* When I run 'mpv', the video player, and I click on the main window with 
my mouse, the click goes through and select whatever window was behind.
* The same thing happens if I build a SDL tutorial and start it with 
SDL_VIDEODRIVER=wayland.
* The same thing happens if I build this Wayland tutorial: 
https://github.com/hdante/hello_wayland
* The same thing with Jan Newmarch's Wayland tutorial examples.

  These different cases lead me to believe that the problem lies in
  Gnome Wayland compositor and not in these programs.

  ProblemType: Bug
  DistroRelease: Ubuntu 17.10
  Package: gnome-shell 3.26.2-0ubuntu0.1
  ProcVersionSignature: Ubuntu 4.13.0-19.22-generic 4.13.13
  Uname: Linux 4.13.0-19-generic x86_64
  ApportVersion: 2.20.7-0ubuntu3.6
  Architecture: amd64
  CurrentDesktop: ubuntu:GNOME
  Date: Thu Dec 21 15:47:50 2017
  DisplayManager: gdm3
  InstallationDate: Installed on 2017-10-02 (79 days ago)
  InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Alpha amd64 (20170926)
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=fr_FR.UTF-8
   SHELL=/bin/bash
  SourcePackage: gnome-shell
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/mutter/+bug/1739625/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741428] [NEW] Upstream version 52.5.2 fixing high-risk bugs not yet available in Ubuntu-repositories

[Ansgar Bohmann]

*** This bug is a security vulnerability ***

Public security bug reported:

On December 22, 2017 Mozilla released Thunderbird 52.5.2, fixing five
security issues:

https://www.mozilla.org/en-US/security/advisories/mfsa2017-30/

The most severe of these bugs only affects Windows. However, the update
also addresses two issues categorized as “high”, one “moderate”, and
another one “low” risk, which seem to affect all platforms including
Linux. Almost two weeks later, there is still no sign of this update
arriving in the Ubuntu repositories.

** Affects: thunderbird (Ubuntu)
 Importance: Undecided
 Status: New

** Information type changed from Private Security to Public Security

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to thunderbird in Ubuntu.
https://bugs.launchpad.net/bugs/1741428

Title:
  Upstream version 52.5.2 fixing high-risk bugs not yet available in
  Ubuntu-repositories

Status in thunderbird package in Ubuntu:
  New

Bug description:
  On December 22, 2017 Mozilla released Thunderbird 52.5.2, fixing five
  security issues:

  https://www.mozilla.org/en-US/security/advisories/mfsa2017-30/

  The most severe of these bugs only affects Windows. However, the
  update also addresses two issues categorized as “high”, one
  “moderate”, and another one “low” risk, which seem to affect all
  platforms including Linux. Almost two weeks later, there is still no
  sign of this update arriving in the Ubuntu repositories.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/thunderbird/+bug/1741428/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1697450] Re: Gnome Shell hangs at startup

[Daniel van Vugt]

OK, sounds very likely to be a kernel bug, triggered by GPU usage upon
login.

** Summary changed:

- Gnome Shell hangs at startup
+ Whole machine freezes at startup using kernels after 4.8

** Changed in: linux (Ubuntu)
   Status: Incomplete => New

** Changed in: gdm3 (Ubuntu)
   Status: Incomplete => Invalid

** No longer affects: gdm3 (Ubuntu)

** No longer affects: gnome-shell (Ubuntu)

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/1697450

Title:
  Whole machine freezes at startup using kernels after 4.8

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I'm trying to install from the daily Artful desktop image (20170612).

  After boot, the gnome session hangs at startup, while the "zoom"
  animation is being shown.

  I have an intel card:

  
  00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen 
Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
  Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v2/3rd Gen Core 
processor Graphics Controller
  Flags: bus master, fast devsel, latency 0, IRQ 29
  Memory at f780 (64-bit, non-prefetchable) [size=4M]
  Memory at e000 (64-bit, prefetchable) [size=256M]
  I/O ports at f000 [size=64]
  [virtual] Expansion ROM at 000c [disabled] [size=128K]
  Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Capabilities: [d0] Power Management version 2
  Capabilities: [a4] PCI Advanced Features
  Kernel driver in use: i915
  Kernel modules: i915

  
  I'm not sure how to debug this further, but I had similar issues with the 
installer from Zesty as well (see 
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1681846)
  With Artful, at least it gets past the splash screen but then it hangs.

  Note that the system is currently running Yakkety with no issue.
  --- 
  ApportVersion: 2.20.7-0ubuntu2
  Architecture: amd64
  CurrentDesktop: GNOME
  DistroRelease: Ubuntu 17.10
  InstallationDate: Installed on 2017-07-30 (71 days ago)
  InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Alpha amd64 
(20170730)
  NonfreeKernelModules: zfs zunicode zcommon znvpair zavl
  Package: linux
  PackageArchitecture: amd64
  ProcVersionSignature: Ubuntu 4.8.0-59.64-generic 4.8.17
  Tags:  artful wayland-session
  Uname: Linux 4.8.0-59-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip libvirt lpadmin lxd plugdev sambashare sudo
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1697450/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1697450] Re: Gnome Shell hangs at startup

[Alberto Donato]

@Daniel no, the whole system freezes, even if I ssh before the UI starts
(which requires exact timing), then the machine freezes.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-shell in Ubuntu.
https://bugs.launchpad.net/bugs/1697450

Title:
  Gnome Shell hangs at startup

Status in gdm3 package in Ubuntu:
  Incomplete
Status in gnome-shell package in Ubuntu:
  Incomplete
Status in linux package in Ubuntu:
  Incomplete

Bug description:
  I'm trying to install from the daily Artful desktop image (20170612).

  After boot, the gnome session hangs at startup, while the "zoom"
  animation is being shown.

  I have an intel card:

  
  00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen 
Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
  Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v2/3rd Gen Core 
processor Graphics Controller
  Flags: bus master, fast devsel, latency 0, IRQ 29
  Memory at f780 (64-bit, non-prefetchable) [size=4M]
  Memory at e000 (64-bit, prefetchable) [size=256M]
  I/O ports at f000 [size=64]
  [virtual] Expansion ROM at 000c [disabled] [size=128K]
  Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Capabilities: [d0] Power Management version 2
  Capabilities: [a4] PCI Advanced Features
  Kernel driver in use: i915
  Kernel modules: i915

  
  I'm not sure how to debug this further, but I had similar issues with the 
installer from Zesty as well (see 
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1681846)
  With Artful, at least it gets past the splash screen but then it hangs.

  Note that the system is currently running Yakkety with no issue.
  --- 
  ApportVersion: 2.20.7-0ubuntu2
  Architecture: amd64
  CurrentDesktop: GNOME
  DistroRelease: Ubuntu 17.10
  InstallationDate: Installed on 2017-07-30 (71 days ago)
  InstallationMedia: Ubuntu-Server 17.10 "Artful Aardvark" - Alpha amd64 
(20170730)
  NonfreeKernelModules: zfs zunicode zcommon znvpair zavl
  Package: linux
  PackageArchitecture: amd64
  ProcVersionSignature: Ubuntu 4.8.0-59.64-generic 4.8.17
  Tags:  artful wayland-session
  Uname: Linux 4.8.0-59-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip libvirt lpadmin lxd plugdev sambashare sudo
  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1697450/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1638983] Re: Boot splash with luks password prompt broken after nvidia upgrade to 367

[Daniel A.]

Ubuntu 17.10 and nvidia-387, still a problem. Actually, it got even
worse.

On a freshly installed system, fully updated via apt dist-upgrade:

When I edit the boot options and remove "quiet splash", the screen just
goes black.

The only way to boot the system, is to go into rescue mode and continue
normal boot.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to nvidia-graphics-drivers-367 in Ubuntu.
https://bugs.launchpad.net/bugs/1638983

Title:
  Boot splash with luks password prompt broken after nvidia upgrade to
  367

Status in nvidia-graphics-drivers-367 package in Ubuntu:
  Confirmed

Bug description:
  Just got the nvidia driver update from 361 to 367. Upon reboot, the
  boot splash (plymouth?) with the password prompt for the encrypted
  root is missing.

  The screen flashes dark purple and the switches to black with a
  blinking cursor echoing anything typed. Ctrl-alt-del reboots. Booting
  with kernel options "quiet splash" removed results in a text-mode boot
  process where the password prompt is present, proceeding normally.

  Wasn't sure if this was plymouth or nvidia issue, I'm guessing nvidia
  because that's what upgraded and broke functionality.

  Tried redoing update-grub and update-initramfs, didn't help. Found I
  had both nvidia-361 and nvidia-367 installed (why didn't -361
  uninstall?), but manually removing -361 (and redoing initramfs just in
  case) didn't change anything.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: nvidia-367 367.57-0ubuntu0.16.04.1
  ProcVersionSignature: Ubuntu 4.4.0-36.55-generic 4.4.16
  Uname: Linux 4.4.0-36-generic x86_64
  NonfreeKernelModules: zfs zunicode zcommon znvpair zavl nvidia_uvm nvidia_drm 
nvidia_modeset nvidia
  ApportVersion: 2.20.1-0ubuntu2.1
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Thu Nov  3 17:45:14 2016
  InstallationDate: Installed on 2016-07-23 (103 days ago)
  InstallationMedia: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 
(20160719)
  SourcePackage: nvidia-graphics-drivers-367
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-367/+bug/1638983/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

[Desktop-packages] [Bug 1741418] [NEW] package cups-browsed 1.8.3-2ubuntu3.1 failed to install/upgrade: η υποδιεργασία installed post-installation script επέστρεψε κατάσταση λάθους 1

[Makis Dimi]

Public bug reported:

i don't know

ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: cups-browsed 1.8.3-2ubuntu3.1
ProcVersionSignature: Ubuntu 4.4.0-104.127-generic 4.4.98
Uname: Linux 4.4.0-104-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.15
Architecture: amd64
CupsErrorLog:
 E [04/Jan/2018:19:17:02 +0200] HP-DeskJet-4670-series: File 
\"/usr/lib/cups/filter/hpcups\" not available: No such file or directory
 E [04/Jan/2018:19:17:02 +0200] HP-DeskJet-4670-series: File 
\"/usr/lib/cups/filter/hpcups\" not available: No such file or directory
 E [05/Jan/2018:09:58:56 +0200] HP-DeskJet-4670-series: File 
\"/usr/lib/cups/filter/hpcups\" not available: No such file or directory
 E [05/Jan/2018:09:58:56 +0200] HP-DeskJet-4670-series: File 
\"/usr/lib/cups/filter/hpcups\" not available: No such file or directory
Date: Wed Jan  3 13:30:02 2018
ErrorMessage: η υποδιεργασία installed post-installation script επέστρεψε 
κατάσταση λάθους 1
InstallationDate: Installed on 2017-01-03 (366 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1)
Lpstat:
 device for EPSON-AL-CX16NF: 
dnssd://EPSON%20AL-CX16NF-5FD934._pdl-datastream._tcp.local/
 device for HP-DeskJet-4670-series: 
dnssd://HP%20DeskJet%204670%20series%20%5B22083D%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-f430b922083d
 device for OKI-DATA-CORP-C301: 
dnssd://OKI-C301-ACD8ED._pdl-datastream._tcp.local/
MachineType: LENOVO 42334AG
Papersize: a4
PpdFiles:
 OKI-DATA-CORP-C301: Oki C301dn Foomatic/foo2hiperc (recommended)
 HP-DeskJet-4670-series: HP Deskjet 4670 Series, hpcups 3.16.3
 EPSON-AL-CX16NF: KONICA MINOLTA magicolor 1600W Foomatic/foo2lava (recommended)
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-104-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
RelatedPackageVersions:
 dpkg 1.18.4ubuntu1.3
 apt  1.2.24
SourcePackage: cups-filters
Title: package cups-browsed 1.8.3-2ubuntu3.1 failed to install/upgrade: η 
υποδιεργασία installed post-installation script επέστρεψε κατάσταση λάθους 1
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 05/22/2009
dmi.bios.vendor: LENOVO
dmi.bios.version: 6GET18WW(V1.09)
dmi.board.name: KIWDX
dmi.board.vendor: LENOVO
dmi.board.version: REFERENCE
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: No Enclosure
dmi.chassis.version: N/A
dmi.modalias: 
dmi:bvnLENOVO:bvr6GET18WW(V1.09):bd05/22/2009:svnLENOVO:pn42334AG:pvrLenovo3000N500:rvnLENOVO:rnKIWDX:rvrREFERENCE:cvnNoEnclosure:ct10:cvrN/A:
dmi.product.name: 42334AG
dmi.product.version: Lenovo 3000 N500
dmi.sys.vendor: LENOVO

** Affects: cups-filters (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package xenial

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to cups-filters in Ubuntu.
https://bugs.launchpad.net/bugs/1741418

Title:
  package cups-browsed 1.8.3-2ubuntu3.1 failed to install/upgrade: η
  υποδιεργασία installed post-installation script επέστρεψε κατάσταση
  λάθους 1

Status in cups-filters package in Ubuntu:
  New

Bug description:
  i don't know

  ProblemType: Package
  DistroRelease: Ubuntu 16.04
  Package: cups-browsed 1.8.3-2ubuntu3.1
  ProcVersionSignature: Ubuntu 4.4.0-104.127-generic 4.4.98
  Uname: Linux 4.4.0-104-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.15
  Architecture: amd64
  CupsErrorLog:
   E [04/Jan/2018:19:17:02 +0200] HP-DeskJet-4670-series: File 
\"/usr/lib/cups/filter/hpcups\" not available: No such file or directory
   E [04/Jan/2018:19:17:02 +0200] HP-DeskJet-4670-series: File 
\"/usr/lib/cups/filter/hpcups\" not available: No such file or directory
   E [05/Jan/2018:09:58:56 +0200] HP-DeskJet-4670-series: File 
\"/usr/lib/cups/filter/hpcups\" not available: No such file or directory
   E [05/Jan/2018:09:58:56 +0200] HP-DeskJet-4670-series: File 
\"/usr/lib/cups/filter/hpcups\" not available: No such file or directory
  Date: Wed Jan  3 13:30:02 2018
  ErrorMessage: η υποδιεργασία installed post-installation script επέστρεψε 
κατάσταση λάθους 1
  InstallationDate: Installed on 2017-01-03 (366 days ago)
  InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 
(20160420.1)
  Lpstat:
   device for EPSON-AL-CX16NF: 
dnssd://EPSON%20AL-CX16NF-5FD934._pdl-datastream._tcp.local/
   device for HP-DeskJet-4670-series: 
dnssd://HP%20DeskJet%204670%20series%20%5B22083D%5D._ipp._tcp.local/?uuid=1c852a4d-b800-1f08-abcd-f430b922083d
   device for OKI-DATA-CORP-C301: 
dnssd://OKI-C301-ACD8ED._pdl-datastream._tcp.local/
  MachineType: LENOVO 42334AG
  Papersize: a4
  PpdFiles:
   OKI-DATA-CORP-C301: Oki C301dn Foomatic/foo2hiperc (recommended)
   HP-DeskJet-4670-series: HP Deskjet 4670 Series, hpcups 3.16.3
   EPSON-AL-CX16NF: KONICA MINOLTA magicolor 1600W Foomatic/foo2lava 
(recommended)
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-104-generic 
root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7