[Desktop-packages] [Bug 1944991] [NEW] Resume on glamor cause GPU lockup/screen corruption on Radeon 3100 Graphics" (ChipID = 0x9611) when shadowPrimary is off
You have been subscribed to a public bug: GPU: ATI Radeon 3100 Graphics (ChipID = 0x9611) (RS780) GPU Lockup message in dmesg output after resume: [ 916.000550] radeon :01:05.0: ring 0 stalled for more than 10084msec [ 916.000569] radeon :01:05.0: GPU lockup (current fence id 0x20cc last fence id 0x20d6 on ring 0) [ 916.516556] radeon :01:05.0: ring 0 stalled for more than 10600msec [ 916.516569] radeon :01:05.0: GPU lockup (current fence id 0x20cc last fence id 0x20d6 on ring 0) [ 917.024566] radeon :01:05.0: ring 0 stalled for more than 11108msec [ 917.024575] radeon :01:05.0: GPU lockup (current fence id 0x20cc last fence id 0x20d6 on ring 0) [ 917.536558] radeon :01:05.0: ring 0 stalled for more than 11620msec [ 917.536570] radeon :01:05.0: GPU lockup (current fence id 0x20cc last fence id 0x20d6 on ring 0) [ 918.048571] radeon :01:05.0: ring 0 stalled for more than 12132msec [ 918.048580] radeon :01:05.0: GPU lockup (current fence id 0x20cc last fence id 0x20d6 on ring 0) ... [ 935.726783] radeon :01:05.0: GPU softreset: 0x0019 [ 935.726788] radeon :01:05.0: R_008010_GRBM_STATUS = 0xE57034E0 [ 935.726793] radeon :01:05.0: R_008014_GRBM_STATUS2 = 0x00110103 [ 935.726797] radeon :01:05.0: R_000E50_SRBM_STATUS = 0x2040 [ 935.726801] radeon :01:05.0: R_008674_CP_STALLED_STAT1 = 0x0100 [ 935.726805] radeon :01:05.0: R_008678_CP_STALLED_STAT2 = 0x1002 [ 935.726809] radeon :01:05.0: R_00867C_CP_BUSY_STAT = 0x00028486 [ 935.726813] radeon :01:05.0: R_008680_CP_STAT = 0x80838645 [ 935.726817] radeon :01:05.0: R_00D034_DMA_STATUS_REG = 0x44C83D57 [ 935.779906] radeon :01:05.0: R_008020_GRBM_SOFT_RESET=0x7FEF [ 935.779962] radeon :01:05.0: SRBM_SOFT_RESET=0x0100 [ 935.782061] radeon :01:05.0: R_008010_GRBM_STATUS = 0xA0003030 [ 935.782066] radeon :01:05.0: R_008014_GRBM_STATUS2 = 0x0003 [ 935.782070] radeon :01:05.0: R_000E50_SRBM_STATUS = 0x20008040 [ 935.782074] radeon :01:05.0: R_008674_CP_STALLED_STAT1 = 0x [ 935.782078] radeon :01:05.0: R_008678_CP_STALLED_STAT2 = 0x [ 935.782081] radeon :01:05.0: R_00867C_CP_BUSY_STAT = 0x [ 935.782085] radeon :01:05.0: R_008680_CP_STAT = 0x8010 [ 935.782089] radeon :01:05.0: R_00D034_DMA_STATUS_REG = 0x44C83D57 [ 935.782097] radeon :01:05.0: GPU reset succeeded, trying to resume Graphics is broken... text hardly readable, interface not responding. First observed on latest Mint (20.2)... then discovered Peppermint 10 was not affected. I believe Peppermint 10 is based on 18.04 and I am unsure why it is not affected. I tested with many versions of Ubuntu... Before 17.04... no problem... but was using EXA acceleration. 17.04 first to use Glamor... screen corruption is not obvious... but dmesg show GPU lockup... 17.10 and following is really problematic after resume, but possible to Ctrl-Alt-F4 to go to a text console and ... sudo reboot. There is a possibility I missed the exact version as I don't have my notes near me. Adding Option "AccelMethod" "EXA" at the good place in xorg.conf file have fixed the issue. I am unlikely to have access again to that specific computer in the future. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu69 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 6610 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.465 DistroRelease: Ubuntu 21.10 IwConfig: lono wireless extensions. enp63s0 no wireless extensions. LiveMediaBuild: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210920) MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/hostname.seed maybe-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 5.13.0-16.16-generic 5.13.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.13.0-16-generic N/A linux-backports-modules-5.13.0-16-generic N/A linux-firmware 1.200 RfKill: Tags: impish Uname: Linux 5.13.0-16-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: N/A _MarkForUpload: True dmi.bios.date: 11/15/2011 dmi.bios.release: 3.14 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786F6 v03.14 dmi.board.name: 3029h dmi.board.vendor: Hewlett-Packard dmi.chassis.t
[Desktop-packages] [Bug 1944991] Re: Resume on glamor cause GPU lockup/screen corruption on Radeon 3100 Graphics" (ChipID = 0x9611) when shadowPrimary is off
** Package changed: linux (Ubuntu) => xserver-xorg-video-ati (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-ati in Ubuntu. https://bugs.launchpad.net/bugs/1944991 Title: Resume on glamor cause GPU lockup/screen corruption on Radeon 3100 Graphics" (ChipID = 0x9611) when shadowPrimary is off Status in xserver-xorg-video-ati package in Ubuntu: Confirmed Bug description: GPU: ATI Radeon 3100 Graphics (ChipID = 0x9611) (RS780) GPU Lockup message in dmesg output after resume: [ 916.000550] radeon :01:05.0: ring 0 stalled for more than 10084msec [ 916.000569] radeon :01:05.0: GPU lockup (current fence id 0x20cc last fence id 0x20d6 on ring 0) [ 916.516556] radeon :01:05.0: ring 0 stalled for more than 10600msec [ 916.516569] radeon :01:05.0: GPU lockup (current fence id 0x20cc last fence id 0x20d6 on ring 0) [ 917.024566] radeon :01:05.0: ring 0 stalled for more than 11108msec [ 917.024575] radeon :01:05.0: GPU lockup (current fence id 0x20cc last fence id 0x20d6 on ring 0) [ 917.536558] radeon :01:05.0: ring 0 stalled for more than 11620msec [ 917.536570] radeon :01:05.0: GPU lockup (current fence id 0x20cc last fence id 0x20d6 on ring 0) [ 918.048571] radeon :01:05.0: ring 0 stalled for more than 12132msec [ 918.048580] radeon :01:05.0: GPU lockup (current fence id 0x20cc last fence id 0x20d6 on ring 0) ... [ 935.726783] radeon :01:05.0: GPU softreset: 0x0019 [ 935.726788] radeon :01:05.0: R_008010_GRBM_STATUS = 0xE57034E0 [ 935.726793] radeon :01:05.0: R_008014_GRBM_STATUS2 = 0x00110103 [ 935.726797] radeon :01:05.0: R_000E50_SRBM_STATUS = 0x2040 [ 935.726801] radeon :01:05.0: R_008674_CP_STALLED_STAT1 = 0x0100 [ 935.726805] radeon :01:05.0: R_008678_CP_STALLED_STAT2 = 0x1002 [ 935.726809] radeon :01:05.0: R_00867C_CP_BUSY_STAT = 0x00028486 [ 935.726813] radeon :01:05.0: R_008680_CP_STAT = 0x80838645 [ 935.726817] radeon :01:05.0: R_00D034_DMA_STATUS_REG = 0x44C83D57 [ 935.779906] radeon :01:05.0: R_008020_GRBM_SOFT_RESET=0x7FEF [ 935.779962] radeon :01:05.0: SRBM_SOFT_RESET=0x0100 [ 935.782061] radeon :01:05.0: R_008010_GRBM_STATUS = 0xA0003030 [ 935.782066] radeon :01:05.0: R_008014_GRBM_STATUS2 = 0x0003 [ 935.782070] radeon :01:05.0: R_000E50_SRBM_STATUS = 0x20008040 [ 935.782074] radeon :01:05.0: R_008674_CP_STALLED_STAT1 = 0x [ 935.782078] radeon :01:05.0: R_008678_CP_STALLED_STAT2 = 0x [ 935.782081] radeon :01:05.0: R_00867C_CP_BUSY_STAT = 0x [ 935.782085] radeon :01:05.0: R_008680_CP_STAT = 0x8010 [ 935.782089] radeon :01:05.0: R_00D034_DMA_STATUS_REG = 0x44C83D57 [ 935.782097] radeon :01:05.0: GPU reset succeeded, trying to resume Graphics is broken... text hardly readable, interface not responding. First observed on latest Mint (20.2)... then discovered Peppermint 10 was not affected. I believe Peppermint 10 is based on 18.04 and I am unsure why it is not affected. I tested with many versions of Ubuntu... Before 17.04... no problem... but was using EXA acceleration. 17.04 first to use Glamor... screen corruption is not obvious... but dmesg show GPU lockup... 17.10 and following is really problematic after resume, but possible to Ctrl-Alt-F4 to go to a text console and ... sudo reboot. There is a possibility I missed the exact version as I don't have my notes near me. Adding Option "AccelMethod" "EXA" at the good place in xorg.conf file have fixed the issue. I am unlikely to have access again to that specific computer in the future. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu69 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 6610 F pulseaudio CasperMD5CheckResult: pass CasperVersion: 1.465 DistroRelease: Ubuntu 21.10 IwConfig: lono wireless extensions. enp63s0 no wireless extensions. LiveMediaBuild: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210920) MachineType: Hewlett-Packard HP Compaq dc5850 Small Form Factor NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/hostname.seed maybe-ubiquity quiet splash --- ProcVersionSignature: Ubuntu 5.13.0-16.16-generic 5.13.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No Puls
[Desktop-packages] [Bug 1936826]
*** Bug 2009964 has been marked as a duplicate of this bug. *** -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1936826 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() [st-focus-manager.c:199] Status in GNOME Shell: Unknown Status in gnome-shell package in Ubuntu: In Progress Status in gnome-shell package in Fedora: Confirmed Bug description: https://errors.ubuntu.com/problem/a7fed12980ff951be9a10c4f2e04d99a23b010ae --- Testing daily Ubuntu Impish ISO 2021-07-19 Test machine : Dell [Latitude] 7280 (i5-7300U, Received the error message - Ubuntu has experienced an internal error ...do you want to send ...etc, etc. This bug occurred when I was scrolling up and down on the "Settings" app and selected "Appearance". ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: gnome-shell 40.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-20.21+21.10.1-generic 5.11.21 Uname: Linux 5.11.0-20-generic x86_64 ApportVersion: 2.20.11-0ubuntu67 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jul 19 12:15:54 2021 DisplayManager: gdm3 ExecutablePath: /usr/bin/gnome-shell GsettingsChanges: b'org.gnome.shell' b'welcome-dialog-last-shown-version' b"'40.2'" b'org.gnome.desktop.input-sources' b'sources' b"[('xkb', 'is')]" b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'" b'org.gnome.desktop.privacy' b'report-technical-problems' b'true' InstallationDate: Installed on 2021-07-19 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210719) ProcCmdline: /usr/bin/gnome-shell RelatedPackageVersions: mutter-common 40.2.1-1ubuntu1 Signal: 11 SourcePackage: gnome-shell StacktraceTop: st_focus_manager_remove_group () from /usr/lib/gnome-shell/libst-1.0.so g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo separator: To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1936826/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1936826]
*** Bug 2009998 has been marked as a duplicate of this bug. *** -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1936826 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() [st-focus-manager.c:199] Status in GNOME Shell: Unknown Status in gnome-shell package in Ubuntu: In Progress Status in gnome-shell package in Fedora: Confirmed Bug description: https://errors.ubuntu.com/problem/a7fed12980ff951be9a10c4f2e04d99a23b010ae --- Testing daily Ubuntu Impish ISO 2021-07-19 Test machine : Dell [Latitude] 7280 (i5-7300U, Received the error message - Ubuntu has experienced an internal error ...do you want to send ...etc, etc. This bug occurred when I was scrolling up and down on the "Settings" app and selected "Appearance". ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: gnome-shell 40.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-20.21+21.10.1-generic 5.11.21 Uname: Linux 5.11.0-20-generic x86_64 ApportVersion: 2.20.11-0ubuntu67 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jul 19 12:15:54 2021 DisplayManager: gdm3 ExecutablePath: /usr/bin/gnome-shell GsettingsChanges: b'org.gnome.shell' b'welcome-dialog-last-shown-version' b"'40.2'" b'org.gnome.desktop.input-sources' b'sources' b"[('xkb', 'is')]" b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'" b'org.gnome.desktop.privacy' b'report-technical-problems' b'true' InstallationDate: Installed on 2021-07-19 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210719) ProcCmdline: /usr/bin/gnome-shell RelatedPackageVersions: mutter-common 40.2.1-1ubuntu1 Signal: 11 SourcePackage: gnome-shell StacktraceTop: st_focus_manager_remove_group () from /usr/lib/gnome-shell/libst-1.0.so g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo separator: To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1936826/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1936826]
*** Bug 2010048 has been marked as a duplicate of this bug. *** -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1936826 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() [st-focus-manager.c:199] Status in GNOME Shell: Unknown Status in gnome-shell package in Ubuntu: In Progress Status in gnome-shell package in Fedora: Confirmed Bug description: https://errors.ubuntu.com/problem/a7fed12980ff951be9a10c4f2e04d99a23b010ae --- Testing daily Ubuntu Impish ISO 2021-07-19 Test machine : Dell [Latitude] 7280 (i5-7300U, Received the error message - Ubuntu has experienced an internal error ...do you want to send ...etc, etc. This bug occurred when I was scrolling up and down on the "Settings" app and selected "Appearance". ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: gnome-shell 40.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-20.21+21.10.1-generic 5.11.21 Uname: Linux 5.11.0-20-generic x86_64 ApportVersion: 2.20.11-0ubuntu67 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jul 19 12:15:54 2021 DisplayManager: gdm3 ExecutablePath: /usr/bin/gnome-shell GsettingsChanges: b'org.gnome.shell' b'welcome-dialog-last-shown-version' b"'40.2'" b'org.gnome.desktop.input-sources' b'sources' b"[('xkb', 'is')]" b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'" b'org.gnome.desktop.privacy' b'report-technical-problems' b'true' InstallationDate: Installed on 2021-07-19 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210719) ProcCmdline: /usr/bin/gnome-shell RelatedPackageVersions: mutter-common 40.2.1-1ubuntu1 Signal: 11 SourcePackage: gnome-shell StacktraceTop: st_focus_manager_remove_group () from /usr/lib/gnome-shell/libst-1.0.so g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo separator: To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1936826/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1936826]
*** Bug 2010034 has been marked as a duplicate of this bug. *** -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1936826 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() [st-focus-manager.c:199] Status in GNOME Shell: Unknown Status in gnome-shell package in Ubuntu: In Progress Status in gnome-shell package in Fedora: Confirmed Bug description: https://errors.ubuntu.com/problem/a7fed12980ff951be9a10c4f2e04d99a23b010ae --- Testing daily Ubuntu Impish ISO 2021-07-19 Test machine : Dell [Latitude] 7280 (i5-7300U, Received the error message - Ubuntu has experienced an internal error ...do you want to send ...etc, etc. This bug occurred when I was scrolling up and down on the "Settings" app and selected "Appearance". ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: gnome-shell 40.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-20.21+21.10.1-generic 5.11.21 Uname: Linux 5.11.0-20-generic x86_64 ApportVersion: 2.20.11-0ubuntu67 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jul 19 12:15:54 2021 DisplayManager: gdm3 ExecutablePath: /usr/bin/gnome-shell GsettingsChanges: b'org.gnome.shell' b'welcome-dialog-last-shown-version' b"'40.2'" b'org.gnome.desktop.input-sources' b'sources' b"[('xkb', 'is')]" b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'" b'org.gnome.desktop.privacy' b'report-technical-problems' b'true' InstallationDate: Installed on 2021-07-19 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210719) ProcCmdline: /usr/bin/gnome-shell RelatedPackageVersions: mutter-common 40.2.1-1ubuntu1 Signal: 11 SourcePackage: gnome-shell StacktraceTop: st_focus_manager_remove_group () from /usr/lib/gnome-shell/libst-1.0.so g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo separator: To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1936826/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1936826]
*** Bug 2010017 has been marked as a duplicate of this bug. *** -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1936826 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() [st-focus-manager.c:199] Status in GNOME Shell: Unknown Status in gnome-shell package in Ubuntu: In Progress Status in gnome-shell package in Fedora: Confirmed Bug description: https://errors.ubuntu.com/problem/a7fed12980ff951be9a10c4f2e04d99a23b010ae --- Testing daily Ubuntu Impish ISO 2021-07-19 Test machine : Dell [Latitude] 7280 (i5-7300U, Received the error message - Ubuntu has experienced an internal error ...do you want to send ...etc, etc. This bug occurred when I was scrolling up and down on the "Settings" app and selected "Appearance". ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: gnome-shell 40.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-20.21+21.10.1-generic 5.11.21 Uname: Linux 5.11.0-20-generic x86_64 ApportVersion: 2.20.11-0ubuntu67 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jul 19 12:15:54 2021 DisplayManager: gdm3 ExecutablePath: /usr/bin/gnome-shell GsettingsChanges: b'org.gnome.shell' b'welcome-dialog-last-shown-version' b"'40.2'" b'org.gnome.desktop.input-sources' b'sources' b"[('xkb', 'is')]" b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'" b'org.gnome.desktop.privacy' b'report-technical-problems' b'true' InstallationDate: Installed on 2021-07-19 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210719) ProcCmdline: /usr/bin/gnome-shell RelatedPackageVersions: mutter-common 40.2.1-1ubuntu1 Signal: 11 SourcePackage: gnome-shell StacktraceTop: st_focus_manager_remove_group () from /usr/lib/gnome-shell/libst-1.0.so g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo separator: To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1936826/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1936826]
*** Bug 2010007 has been marked as a duplicate of this bug. *** -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1936826 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() [st-focus-manager.c:199] Status in GNOME Shell: Unknown Status in gnome-shell package in Ubuntu: In Progress Status in gnome-shell package in Fedora: Confirmed Bug description: https://errors.ubuntu.com/problem/a7fed12980ff951be9a10c4f2e04d99a23b010ae --- Testing daily Ubuntu Impish ISO 2021-07-19 Test machine : Dell [Latitude] 7280 (i5-7300U, Received the error message - Ubuntu has experienced an internal error ...do you want to send ...etc, etc. This bug occurred when I was scrolling up and down on the "Settings" app and selected "Appearance". ProblemType: Crash DistroRelease: Ubuntu 21.10 Package: gnome-shell 40.2-1ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-20.21+21.10.1-generic 5.11.21 Uname: Linux 5.11.0-20-generic x86_64 ApportVersion: 2.20.11-0ubuntu67 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Jul 19 12:15:54 2021 DisplayManager: gdm3 ExecutablePath: /usr/bin/gnome-shell GsettingsChanges: b'org.gnome.shell' b'welcome-dialog-last-shown-version' b"'40.2'" b'org.gnome.desktop.input-sources' b'sources' b"[('xkb', 'is')]" b'org.gnome.desktop.interface' b'gtk-im-module' b"'gtk-im-context-simple'" b'org.gnome.desktop.privacy' b'report-technical-problems' b'true' InstallationDate: Installed on 2021-07-19 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Alpha amd64 (20210719) ProcCmdline: /usr/bin/gnome-shell RelatedPackageVersions: mutter-common 40.2.1-1ubuntu1 Signal: 11 SourcePackage: gnome-shell StacktraceTop: st_focus_manager_remove_group () from /usr/lib/gnome-shell/libst-1.0.so g_closure_invoke () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 ?? () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit_valist () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 g_signal_emit () from /lib/x86_64-linux-gnu/libgobject-2.0.so.0 Title: gnome-shell crashed with SIGSEGV in st_focus_manager_remove_group() UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo separator: To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1936826/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1846374] Re: Having a video playing/paused when switched to another user generates gigabytes of error logs
I can confirm this also happens on elementary OS 6 with nvidia-driver-470. I tried to add a limit to /etc/systemd/journald.conf, but it didn't help at all. Finally I managed to limit the log size using this tutorial: https://askubuntu.com/questions/184949/how-do-i-limit-the-size-of-my-syslog I still have problems with hight CPU & SSD usage caused by the logging, but at least it doesn't fill my disk entirely. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-340 in Ubuntu. https://bugs.launchpad.net/bugs/1846374 Title: Having a video playing/paused when switched to another user generates gigabytes of error logs Status in nvidia-graphics-drivers-340 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-418 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-435 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-440 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-460 package in Ubuntu: Confirmed Bug description: To replicate: 1. Start a video playing, for example in vlc. 'avcodec decoder: Using NVIDIA VDPAU Driver Shared Library 418.56 Fri Mar 15 12:31:51 CDT 2019 for hardware decoding' 2. Optionally pause it. 3. Switch to another user. The original user's ~/.xsession-errors will rapidly fill up with errors along the lines of "vdpau_chroma filter error". At the same time, errors are put in /var/log/syslog as well: [7f9d604810a0] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided. [7f9d604810a0] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided. [7f9d604810a0] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided. (repeat ad nauseum) At least one of the two will rapidly fill up its partition and problems will arise. With AMD video hardware and driver, the video continues playing - you can hear the sound despite being in the other user. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-340/+bug/1846374/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945894] [NEW] Translated strings not imported from damned lies
Public bug reported: The newly translated strings in GTK does not seem to be imported from Damned Lies. GTK in Ubuntu has 50 untranslated strings in Danish but is fully translated in Damned Lies. ** Affects: gtk+3.0 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1945894 Title: Translated strings not imported from damned lies Status in gtk+3.0 package in Ubuntu: New Bug description: The newly translated strings in GTK does not seem to be imported from Damned Lies. GTK in Ubuntu has 50 untranslated strings in Danish but is fully translated in Damned Lies. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1945894/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945063] Re: Ubuntu Dock Bug with window minimize when having Dock at the bottom
This morning I noticed this bug can be reproduced not just by having the Dock at the bottom but also in the default location of left, and I am pretty sure the same case if you have it on the right as well. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell-extension-ubuntu-dock in Ubuntu. https://bugs.launchpad.net/bugs/1945063 Title: Ubuntu Dock Bug with window minimize when having Dock at the bottom Status in Dash to dock: New Status in gnome-shell-extension-ubuntu-dock package in Ubuntu: Confirmed Bug description: Running Ubuntu 21.10 (I know it is still not released, but wanted to test it). I noticed that there a bug where when you have the Dock at the bottom and you launch an app, which minimizing it it won’t minimize to the bottom as it still thinks the Dock is off to the left. Once you change work spaces then only does the app realize that the dock is at the bottom of the screen. Please see attached video. https://imgur.com/a/mgLJ3xp ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: gnome-shell-extension-ubuntu-dock 70~ubuntu3 ProcVersionSignature: Ubuntu 5.13.0-16.16-generic 5.13.13 Uname: Linux 5.13.0-16-generic x86_64 ApportVersion: 2.20.11-0ubuntu69 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sat Sep 25 12:14:42 2021 InstallationDate: Installed on 2021-04-28 (149 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Beta amd64 (20210331.1) PackageArchitecture: all ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-shell-extension-ubuntu-dock UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/dash-to-dock/+bug/1945063/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945895] [NEW] screen flickring after installing cpufreq
Public bug reported: after installing cpufreq the screen flickring and smoothness disappeared in ubuntu . ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.11.0-38.42~20.04.1-generic 5.11.22 Uname: Linux 5.11.0-38-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun Oct 3 18:57:55 2021 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation HD Graphics 5500 [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company HD Graphics 5500 [103c:225a] InstallationDate: Installed on 2021-07-01 (94 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) MachineType: Hewlett-Packard HP EliteBook 820 G2 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-38-generic root=UUID=3a425ccf-6b17-4740-a951-62415983b2e2 ro SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/24/2015 dmi.bios.release: 1.4 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: M71 Ver. 01.04 dmi.board.name: 225A dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 96.54 dmi.chassis.asset.tag: 5CG5172BFZ dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.ec.firmware.release: 150.84 dmi.modalias: dmi:bvnHewlett-Packard:bvrM71Ver.01.04:bd02/24/2015:br1.4:efr150.84:svnHewlett-Packard:pnHPEliteBook820G2:pvrA3009C510203:skuN3F11EC#AB4:rvnHewlett-Packard:rn225A:rvrKBCVersion96.54:cvnHewlett-Packard:ct10:cvr: dmi.product.family: 103C_5336AN G=N L=BUS B=HP S=ELI dmi.product.name: HP EliteBook 820 G2 dmi.product.sku: N3F11EC#AB4 dmi.product.version: A3009C510203 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.105-3~20.04.2 version.libgl1-mesa-dri: libgl1-mesa-dri 21.0.3-0ubuntu0.3~20.04.3 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.11-1ubuntu1~20.04.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1945895 Title: screen flickring after installing cpufreq Status in xorg package in Ubuntu: New Bug description: after installing cpufreq the screen flickring and smoothness disappeared in ubuntu . ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.11.0-38.42~20.04.1-generic 5.11.22 Uname: Linux 5.11.0-38-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun Oct 3 18:57:55 2021 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation HD Graphics 5500 [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company HD Graphics 5500 [103c:225a] InstallationDate: Installed on 2021-07-01 (94 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) MachineType: Hewlett-Packard HP EliteBook 820 G2 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-38-generic root=UUID=3a425ccf-6b17-4740-a951-62415983b2e2 ro SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/24/2015 dmi.bios.release: 1.4 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: M71 Ver. 01.04 dmi.board.name: 225A dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 96.54 dmi.chassis.asset.tag: 5CG5172BFZ dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.ec.firmware.release: 150.84 dmi.modalias: dmi:bvnHewlett-Packard:bvrM71Ver.01.04:bd02/24/2015:br1.4:efr150.84:svnHewlett-Packard:pnHPEliteBook820G2:pvrA3009C510203:skuN3F11EC#AB4:rvnHewlett-Packard:rn225A:rvrKBCVersion96.54:cvnHewlett-Packard:ct10:cvr: dmi.product.family: 103C_5336AN G=N L=BUS B=HP S=ELI dmi.product.name: HP EliteBook 820 G2 dmi.product.sku: N3F11EC#AB4 dmi.product.version: A3009C510203 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.105-3~20.04.2 version.libgl1-mesa-dri: libgl1-mesa-dri 21.0.3-0ubuntu0.3~20.04.3 version.libgl1-mesa-gl
[Desktop-packages] [Bug 1945894] Re: Translated strings not imported from damned lies
Thanks for your report! We don't import translations directly from Damned Lies, but via the PO files in upstream's tarballs. The latest gtk3 version in Ubuntu is 3.24.30 which was released on July 8. So if those strings were translated after July 8, they are not yet in Ubuntu due to the workflow, but will show up later (probably only in 22.04). Please let us know whether you still think there is a bug. ** Also affects: ubuntu-translations Importance: Undecided Status: New ** Changed in: ubuntu-translations Status: New => Incomplete ** Changed in: gtk+3.0 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gtk+3.0 in Ubuntu. https://bugs.launchpad.net/bugs/1945894 Title: Translated strings not imported from damned lies Status in Ubuntu Translations: Incomplete Status in gtk+3.0 package in Ubuntu: Incomplete Bug description: The newly translated strings in GTK does not seem to be imported from Damned Lies. GTK in Ubuntu has 50 untranslated strings in Danish but is fully translated in Damned Lies. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-translations/+bug/1945894/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945900] [NEW] icons in app launcher subfolders are too small
Public bug reported: Relatively fresh install just after installing updates and a few pieces of software. Not sure what other info is needed other than all the info in the attachment but let me know if there is anything else. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: gnome-shell 40.5-1ubuntu1 ProcVersionSignature: Ubuntu 5.13.0-16.16-generic 5.13.13 Uname: Linux 5.13.0-16-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu69 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sun Oct 3 11:12:59 2021 DisplayManager: gdm3 InstallationDate: Installed on 2021-10-03 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Beta amd64 (20210922) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: mutter-common 40.5-1ubuntu1 SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gnome-shell (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug impish wayland-session ** Attachment added: "Screenshot from 2021-10-03 11-12-38.png" https://bugs.launchpad.net/bugs/1945900/+attachment/5530276/+files/Screenshot%20from%202021-10-03%2011-12-38.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1945900 Title: icons in app launcher subfolders are too small Status in gnome-shell package in Ubuntu: New Bug description: Relatively fresh install just after installing updates and a few pieces of software. Not sure what other info is needed other than all the info in the attachment but let me know if there is anything else. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: gnome-shell 40.5-1ubuntu1 ProcVersionSignature: Ubuntu 5.13.0-16.16-generic 5.13.13 Uname: Linux 5.13.0-16-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu69 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sun Oct 3 11:12:59 2021 DisplayManager: gdm3 InstallationDate: Installed on 2021-10-03 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Beta amd64 (20210922) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: mutter-common 40.5-1ubuntu1 SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1945900/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1943840] Re: [FFe] Update the ubuntu-desktop-minimal seed to use the firefox snap
To expand on the above, have the Firefox and snapd developers figured out how to incorporate native messaging in a snap-based browser? You guys are locking out a significant portion of useful extensions if not figured out. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-meta in Ubuntu. https://bugs.launchpad.net/bugs/1943840 Title: [FFe] Update the ubuntu-desktop-minimal seed to use the firefox snap Status in ubuntu-meta package in Ubuntu: Fix Released Status in ubuntu-release-upgrader package in Ubuntu: Fix Released Status in ubuntu-settings package in Ubuntu: Fix Released Status in ubuntu-meta source package in Impish: Fix Released Status in ubuntu-release-upgrader source package in Impish: Fix Released Status in ubuntu-settings source package in Impish: Fix Released Bug description: Per Canonical's distribution agreement with Mozilla, we're making the snap¹ the default installation of firefox on desktop ISOs starting with Ubuntu 21.10. The snap is built and published for amd64, armhf and arm64. It is jointly maintained by Mozilla and the Ubuntu desktop team, and published by Mozilla. This requires updating the desktop-minimal seed, as well as ubuntu- release-upgrader. ¹ https://snapcraft.io/firefox To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-meta/+bug/1943840/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1943840] Re: [FFe] Update the ubuntu-desktop-minimal seed to use the firefox snap
Sam, that is the reason why we're doing this in a normal, non-LTS release, which gives us time to identify and iron out problems and regressions like this, while exposing the change to real-world testing. The firefox deb package will remain supported for the duration of the 21.10 release, so this is not locking users or extensions out. Jonathan, native messaging support in strictly-confined browser snaps is being discussed here: https://forum.snapcraft.io/t/native-messaging- support-in-strictly-confined-browser-snaps/26849. Constructive feedback and use cases, as well as suggestions, are welcome. Me-too -like comments and rants are not. Thanks! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to ubuntu-meta in Ubuntu. https://bugs.launchpad.net/bugs/1943840 Title: [FFe] Update the ubuntu-desktop-minimal seed to use the firefox snap Status in ubuntu-meta package in Ubuntu: Fix Released Status in ubuntu-release-upgrader package in Ubuntu: Fix Released Status in ubuntu-settings package in Ubuntu: Fix Released Status in ubuntu-meta source package in Impish: Fix Released Status in ubuntu-release-upgrader source package in Impish: Fix Released Status in ubuntu-settings source package in Impish: Fix Released Bug description: Per Canonical's distribution agreement with Mozilla, we're making the snap¹ the default installation of firefox on desktop ISOs starting with Ubuntu 21.10. The snap is built and published for amd64, armhf and arm64. It is jointly maintained by Mozilla and the Ubuntu desktop team, and published by Mozilla. This requires updating the desktop-minimal seed, as well as ubuntu- release-upgrader. ¹ https://snapcraft.io/firefox To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-meta/+bug/1943840/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945912] [NEW] Shows Blank Screen on boot
Public bug reported: I tried setting nomodeset, it allowed me to boot but i am not able to control brightness and other stuff. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.11.0-37.41~20.04.2-generic 5.11.22 Uname: Linux 5.11.0-37-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Mon Oct 4 00:18:00 2021 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation UHD Graphics 620 [8086:5917] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company UHD Graphics 620 [103c:8486] InstallationDate: Installed on 2021-09-30 (3 days ago) InstallationMedia: Ubuntu 20.04.3 LTS "Focal Fossa" - Release amd64 (20210819) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0aa7 Intel Corp. Bus 001 Device 002: ID 04ca:707f Lite-On Technology Corp. HP Wide Vision HD Camera Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP HP Pavilion x360 Convertible 14m-cd0xxx ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-37-generic root=UUID=324db856-0b72-481c-bdd2-28b5942e136b ro quiet splash nomodeset vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/23/2020 dmi.bios.release: 15.37 dmi.bios.vendor: Insyde dmi.bios.version: F.37 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8486 dmi.board.vendor: HP dmi.board.version: 72.23 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 31 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 72.23 dmi.modalias: dmi:bvnInsyde:bvrF.37:bd11/23/2020:br15.37:efr72.23:svnHP:pnHPPavilionx360Convertible14m-cd0xxx:pvrType1ProductConfigId:sku3XV03UA#ABA:rvnHP:rn8486:rvr72.23:cvnHP:ct31:cvrChassisVersion: dmi.product.family: 103C_5335KV HP Pavilion dmi.product.name: HP Pavilion x360 Convertible 14m-cd0xxx dmi.product.sku: 3XV03UA#ABA dmi.product.version: Type1ProductConfigId dmi.sys.vendor: HP version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.105-3~20.04.2 version.libgl1-mesa-dri: libgl1-mesa-dri 21.0.3-0ubuntu0.3~20.04.2 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.11-1ubuntu1~20.04.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1945912 Title: Shows Blank Screen on boot Status in xorg package in Ubuntu: New Bug description: I tried setting nomodeset, it allowed me to boot but i am not able to control brightness and other stuff. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.11.0-37.41~20.04.2-generic 5.11.22 Uname: Linux 5.11.0-37-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Mon Oct 4 00:18:00 2021 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation UHD Graphics 620 [8086:5917] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company UHD Graphics 620 [103c:8486] InstallationDate: Installed on 2021-09-30 (3 days ago) InstallationMedia: Ubuntu 20.04.3 LTS "Focal Fossa" - Release amd64 (20210819) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0aa7 Intel Corp. Bus 001 Device 002: ID 04ca:707f Lite-On Technology Corp. HP Wide Vision HD Camera Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP HP Pavilion x360 Convertible 14m-cd0xxx ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-37-generic root=UUID=324db856-0b72-481c-bdd2-28b5942e136b ro quiet splash nomodeset vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/23/2020 dmi.bios.release: 15.37 dmi.bios.vendor: Insyde dmi.bios.version: F.37 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8486 dmi.board.vendor: H
[Desktop-packages] [Bug 1945912] Re: Shows Blank Screen on boot
Thank you for taking the time to report this bug and helping to make Ubuntu better. Bug reporting is mostly about finding & fixing problems thus preventing future users from hitting the same bug. I suspect a Support site would be more appropriate, eg. https://answers.launchpad.net/ubuntu. You can also find help with your problem in the support forum of your local Ubuntu community http://loco.ubuntu.com/ or asking at https://askubuntu.com or https://ubuntuforums.org, or for more support options please look at https://discourse.ubuntu.com/t/community-support/709 ** Package changed: xorg (Ubuntu) => xorg-server (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1945912 Title: Shows Blank Screen on boot Status in xorg-server package in Ubuntu: New Bug description: I tried setting nomodeset, it allowed me to boot but i am not able to control brightness and other stuff. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.11.0-37.41~20.04.2-generic 5.11.22 Uname: Linux 5.11.0-37-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Mon Oct 4 00:18:00 2021 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation UHD Graphics 620 [8086:5917] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company UHD Graphics 620 [103c:8486] InstallationDate: Installed on 2021-09-30 (3 days ago) InstallationMedia: Ubuntu 20.04.3 LTS "Focal Fossa" - Release amd64 (20210819) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0aa7 Intel Corp. Bus 001 Device 002: ID 04ca:707f Lite-On Technology Corp. HP Wide Vision HD Camera Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP HP Pavilion x360 Convertible 14m-cd0xxx ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-37-generic root=UUID=324db856-0b72-481c-bdd2-28b5942e136b ro quiet splash nomodeset vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/23/2020 dmi.bios.release: 15.37 dmi.bios.vendor: Insyde dmi.bios.version: F.37 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8486 dmi.board.vendor: HP dmi.board.version: 72.23 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 31 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 72.23 dmi.modalias: dmi:bvnInsyde:bvrF.37:bd11/23/2020:br15.37:efr72.23:svnHP:pnHPPavilionx360Convertible14m-cd0xxx:pvrType1ProductConfigId:sku3XV03UA#ABA:rvnHP:rn8486:rvr72.23:cvnHP:ct31:cvrChassisVersion: dmi.product.family: 103C_5335KV HP Pavilion dmi.product.name: HP Pavilion x360 Convertible 14m-cd0xxx dmi.product.sku: 3XV03UA#ABA dmi.product.version: Type1ProductConfigId dmi.sys.vendor: HP version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.105-3~20.04.2 version.libgl1-mesa-dri: libgl1-mesa-dri 21.0.3-0ubuntu0.3~20.04.2 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.11-1ubuntu1~20.04.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1945912/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1870597] Re: libinput says: scheduled expiry is in the past... your system is too slow
To be fair, "your system is too slow" really means the architecture of Mutter (used in gnome-shell) is too slow. Not the hardware. This problem is being improved in newer versions of Mutter using some threading, but generally it's not an issue anyone should be concerned about. ** Changed in: mutter (Ubuntu) Importance: Undecided => Low ** No longer affects: xorg-server (Ubuntu) ** No longer affects: xserver-xorg-input-libinput (Ubuntu) ** Changed in: mutter (Ubuntu) Status: Confirmed => Triaged ** Also affects: xorg-server (Ubuntu) Importance: Undecided Status: New ** Changed in: xorg-server (Ubuntu) Importance: Undecided => Low ** Changed in: xorg-server (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1870597 Title: libinput says: scheduled expiry is in the past... your system is too slow Status in mutter package in Ubuntu: Triaged Status in xorg-server package in Ubuntu: Confirmed Bug description: During the freeze, the output of the install had a message from "gdm- x-session" saying "your system is too slow". To reproduce: 1. Launch the Ubuntu installer 2. Begin the installation process 3. When the installation process begins, move the cursor around 4. Notice how the PC freezes and drops mouse events Description: Ubuntu Focal Fossa (development branch) Release: 20.04 gnome-shell: Installed: 3.36.0-2ubuntu2 Candidate: 3.36.0-2ubuntu2 Version table: *** 3.36.0-2ubuntu2 500 500 http://archive.ubuntu.com/ubuntu focal/main amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: gnome-shell 3.36.0-2ubuntu2 ProcVersionSignature: Ubuntu 5.4.0-21.25-generic 5.4.27 Uname: Linux 5.4.0-21-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu21 Architecture: amd64 CasperVersion: 1.442 Date: Fri Apr 3 14:24:21 2020 DisplayManager: gdm3 GsettingsChanges: LiveMediaBuild: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200401) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=C.UTF-8 SHELL=/bin/bash RelatedPackageVersions: mutter-common 3.36.0-2ubuntu1 SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu22 Architecture: amd64 CasperVersion: 1.442 CompositorRunning: None DistUpgraded: Fresh install DistroCodename: focal DistroRelease: Ubuntu 20.04 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation UHD Graphics 620 [8086:5917] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Dell UHD Graphics 620 [1028:0810] LiveMediaBuild: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200402) MachineType: Dell Inc. Inspiron 5570 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair Package: xorg-server (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=C.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/hostname.seed quiet splash --- ProcVersionSignature: Ubuntu 5.4.0-21.25-generic 5.4.27 Tags: focal ubuntu Uname: Linux 5.4.0-21-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.100-4 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.2-1ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.7-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20190815-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1870597/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1933996] Re: Alt-tab stops switching windows [JS ERROR: TypeError: window is null _createWindowClone@resource:///org/gnome/shell/ui/altTab.js:29:27]
That fix is being tracked in bug 1932328 so is already on its way to Ubuntu eventually. Not sure if 21.04 will get the fix. ** Tags added: fixed-in-40.6 fixed-upstream ** Package changed: gnome-shell (Ubuntu) => mutter (Ubuntu) ** Changed in: mutter (Ubuntu) Status: Triaged => Fix Committed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1933996 Title: Alt-tab stops switching windows [JS ERROR: TypeError: window is null _createWindowClone@resource:///org/gnome/shell/ui/altTab.js:29:27] Status in GNOME Shell: Unknown Status in mutter package in Ubuntu: Fix Committed Bug description: When a new Wayland session is created from a login, Alt-tab works as expected to change windows. After sometime Alt-tab fails to do anything (super-tab still works to change applications) and the following error is created in syslog: gnome-shell[18]: JS ERROR: TypeError: window is null#012_createWindowClone@resource:///org/gnome/shell/ui/altTab.js:29:27#012_init@resource:///org/gnome/shell/ui/altTab.js:1004:34#012_init@resource:///org/gnome/shell/ui/altTab.js:1045:24#012_init@resource:///org/gnome/shell/ui/altTab.js:568:30#012_startSwitcher@resource:///org/gnome/shell/ui/windowManager.js:2069:24 The only workaround I have found is to logout and log back in, however after some time the error repeats itself. Ubuntu 21.04 gnome-shell: Installed: 3.38.4-1ubuntu3~21.04.1 ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: gnome-shell 3.38.4-1ubuntu3~21.04.1 ProcVersionSignature: Ubuntu 5.11.0-22.23-generic 5.11.21 Uname: Linux 5.11.0-22-generic x86_64 ApportVersion: 2.20.11-0ubuntu65.1 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Tue Jun 29 10:53:32 2021 DisplayManager: gdm3 InstallationDate: Installed on 2020-11-11 (230 days ago) InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Release amd64 (20201022) RelatedPackageVersions: mutter-common 3.38.4-1ubuntu2 SourcePackage: gnome-shell UpgradeStatus: Upgraded to hirsute on 2021-04-27 (62 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1933996/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945733] Re: Could not click on any gnome-shell widget...
That's OK. If no more comments are added here for two months then the bug will close automatically. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1945733 Title: Could not click on any gnome-shell widget... Status in gnome-shell package in Ubuntu: Incomplete Bug description: Gnome-shell would not respond to any click on any of its icons. I'm not really sure why, but I suspect it had to do with a screen rotation. I was using Wayland, not X when this happened. I couldn't figure an easy way out of this situation so I did a ctrl-alt-F3 and signed in and rebooted the machine. I'm sorry if that lost some data for you. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: gnome-shell 40.5-1ubuntu1 ProcVersionSignature: Ubuntu 5.13.0-16.16-generic 5.13.13 Uname: Linux 5.13.0-16-generic x86_64 ApportVersion: 2.20.11-0ubuntu69 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Thu Sep 30 21:42:55 2021 DisplayManager: gdm3 InstallationDate: Installed on 2021-05-25 (129 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: mutter-common 40.5-1ubuntu1 SourcePackage: gnome-shell UpgradeStatus: Upgraded to impish on 2021-09-29 (1 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1945733/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945895] Re: screen flickring after installing cpufreq
Flickering and a lack of smoothness are two different issues. The lack of smoothness would just be due to your GPU staying at a lower frequency more often, so it's not a bug but something you would need to tune yourself. As for the flickering, please edit /etc/default/grub and change: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i915.enable_psr=0" and then run: sudo update-grub and reboot. If the problem still happens after that then while it is happening, please run: journalctl -b0 > journal.txt and attach the resulting text file here along with a video of the flickering problem. ** Summary changed: - screen flickring after installing cpufreq + [HP EliteBook 820 G2] screen flickring after installing cpufreq ** Package changed: xorg (Ubuntu) => linux-hwe-5.11 (Ubuntu) ** Changed in: linux-hwe-5.11 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1945895 Title: [HP EliteBook 820 G2] screen flickring after installing cpufreq Status in linux-hwe-5.11 package in Ubuntu: Incomplete Bug description: after installing cpufreq the screen flickring and smoothness disappeared in ubuntu . ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.11.0-38.42~20.04.1-generic 5.11.22 Uname: Linux 5.11.0-38-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun Oct 3 18:57:55 2021 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation HD Graphics 5500 [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company HD Graphics 5500 [103c:225a] InstallationDate: Installed on 2021-07-01 (94 days ago) InstallationMedia: Ubuntu 20.04.2.0 LTS "Focal Fossa" - Release amd64 (20210209.1) MachineType: Hewlett-Packard HP EliteBook 820 G2 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-38-generic root=UUID=3a425ccf-6b17-4740-a951-62415983b2e2 ro SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/24/2015 dmi.bios.release: 1.4 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: M71 Ver. 01.04 dmi.board.name: 225A dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 96.54 dmi.chassis.asset.tag: 5CG5172BFZ dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.ec.firmware.release: 150.84 dmi.modalias: dmi:bvnHewlett-Packard:bvrM71Ver.01.04:bd02/24/2015:br1.4:efr150.84:svnHewlett-Packard:pnHPEliteBook820G2:pvrA3009C510203:skuN3F11EC#AB4:rvnHewlett-Packard:rn225A:rvrKBCVersion96.54:cvnHewlett-Packard:ct10:cvr: dmi.product.family: 103C_5336AN G=N L=BUS B=HP S=ELI dmi.product.name: HP EliteBook 820 G2 dmi.product.sku: N3F11EC#AB4 dmi.product.version: A3009C510203 dmi.sys.vendor: Hewlett-Packard version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.105-3~20.04.2 version.libgl1-mesa-dri: libgl1-mesa-dri 21.0.3-0ubuntu0.3~20.04.3 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.11-1ubuntu1~20.04.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-hwe-5.11/+bug/1945895/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1938895] Re: Err:1 http://ports.ubuntu.com/ubuntu-ports groovy-updates/main
[Expired for software-properties (Ubuntu) because there has been no activity for 60 days.] ** Changed in: software-properties (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to software-properties in Ubuntu. https://bugs.launchpad.net/bugs/1938895 Title: Err:1 http://ports.ubuntu.com/ubuntu-ports groovy-updates/main Status in software-properties package in Ubuntu: Expired Bug description: This one of 103 update package that fail. Now updating alsa-ucm-conf .. Installing package(s) with command apt-get -y install alsa-ucm- conf .. Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: alsa-ucm-conf 1 upgraded, 0 newly installed, 0 to remove and 102 not upgraded. Need to get 25.8 kB of archives. After this operation, 0 B of additional disk space will be used. Err:1 http://ports.ubuntu.com/ubuntu-ports groovy-updates/main arm64 alsa-ucm-conf all 1.2.2-1ubuntu5.1 404 Not Found [IP: 91.189.91.38 80] E: Failed to fetch http://ports.ubuntu.com/ubuntu-ports/pool/main/a/alsa-ucm-conf/alsa-ucm-conf_1.2.2-1ubuntu5.1_all.deb 404 Not Found [IP: 91.189.91.38 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: software-properties-gtk 0.99.3 ProcVersionSignature: Ubuntu 5.8.0-1010.13-raspi 5.8.17 Uname: Linux 5.8.0-1010-raspi aarch64 ApportVersion: 2.20.11-0ubuntu50.1 Architecture: arm64 CasperMD5CheckResult: skip CurrentDesktop: MATE Date: Wed Aug 4 18:27:52 2021 ImageMediaBuild: 20201022 PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= SHELL=/bin/bash SourcePackage: software-properties UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1938895/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1303316] Re: Digital S/PDIF output is not present in 5.1 mode
[Expired for pulseaudio (Ubuntu) because there has been no activity for 60 days.] ** Changed in: pulseaudio (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1303316 Title: Digital S/PDIF output is not present in 5.1 mode Status in pulseaudio package in Ubuntu: Expired Bug description: I have the sound connected through digital S / PDIF Sound works properly selecting stereo, but can not get it to work using 5.1 When I select stereo sound, appears on the tab below to phonon spdif output option. When I select Output 5.1, that option does not appear. I imagine the error will also occur selecting 7.1 Deputy screenshots. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: phonon 4:4.7.0really4.6.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-60.91-generic 3.2.55 Uname: Linux 3.2.0-60-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.0.1-0ubuntu17.6 Architecture: amd64 Date: Sun Apr 6 13:12:42 2014 InstallationMedia: Kubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20130214) MarkForUpload: True ProcEnviron: LANGUAGE= TERM=xterm PATH=(custom, no user) LANG=es_ES.UTF-8 SHELL=/bin/bash SourcePackage: phonon UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1303316/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1303316] Re: Digital S/PDIF output is not present in 5.1 mode
** Changed in: pulseaudio (Ubuntu) Status: Expired => Confirmed -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1303316 Title: Digital S/PDIF output is not present in 5.1 mode Status in pulseaudio package in Ubuntu: Confirmed Bug description: I have the sound connected through digital S / PDIF Sound works properly selecting stereo, but can not get it to work using 5.1 When I select stereo sound, appears on the tab below to phonon spdif output option. When I select Output 5.1, that option does not appear. I imagine the error will also occur selecting 7.1 Deputy screenshots. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: phonon 4:4.7.0really4.6.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-60.91-generic 3.2.55 Uname: Linux 3.2.0-60-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.0.1-0ubuntu17.6 Architecture: amd64 Date: Sun Apr 6 13:12:42 2014 InstallationMedia: Kubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20130214) MarkForUpload: True ProcEnviron: LANGUAGE= TERM=xterm PATH=(custom, no user) LANG=es_ES.UTF-8 SHELL=/bin/bash SourcePackage: phonon UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1303316/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945704] Re: gdm3 shows only purple color screen in virtualbox with default VBoxSVGA or VBoxVGA video drivers
Judging by the syslog, it looks like the VM might have a broken clock. Similar to another bug from a couple of years ago which had the same result: Only the first frame gets displayed so it's a blank purple screen. In that case it was a faulty graphics driver. Try booting with kernel parameter 'nomodeset'. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1945704 Title: gdm3 shows only purple color screen in virtualbox with default VBoxSVGA or VBoxVGA video drivers Status in gnome-shell package in Ubuntu: Confirmed Bug description: Using 20.04 LTS installed from mini.iso, upgraded to 21.10. Then installed Cinnamon desktop by `sudo apt-get install cinnamon*`. This is what I see on boot - see screenshot. --- Note the same happens on installation of regular Ubuntu 21.10 ISO. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: gdm3 41~rc-0ubuntu1 ProcVersionSignature: Ubuntu 5.13.0-16.16-generic 5.13.13 Uname: Linux 5.13.0-16-generic x86_64 ApportVersion: 2.20.11-0ubuntu69 Architecture: amd64 CasperMD5CheckResult: unknown Date: Fri Oct 1 00:04:53 2021 SourcePackage: gdm3 UpgradeStatus: Upgraded to impish on 2021-09-10 (20 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1945704/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1933828] Re: NTP servers from DHCP are not propagated to timesyncd
@Seb this fix has to go to focal for a customer project and must land in the dev release first. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1933828 Title: NTP servers from DHCP are not propagated to timesyncd Status in OEM Priority Project: New Status in network-manager package in Ubuntu: New Status in network-manager source package in Focal: New Bug description: Network manager gets NTP servers from DHCP but do not update timesyncd to use it which keeps using ntp.ubuntu.com. This is a problem on private networks which do not have access to public internet. On this type of network the configuration of timesyncd must be updated manually instead of inheriting the conf from the dhcp servers. This can be integrated with a NM dispatcher script such as below: etc/NetworkManager/dispatcher.d/10-update-timesyncd for example: ==8<=8<=8<=8<=8<== #! /usr/bin/bash [ -n "$CONNECTION_UUID" ] || exit INTERFACE=$1 ACTION=$2 case $ACTION in up | dhcp4-change | dhcp6-change) [ -n "$DHCP4_NTP_SERVERS" ] || exit mkdir -p /etc/systemd/timesyncd.conf.d/ cat< /etc/systemd/timesyncd.conf.d/$CONNECTION_UUID.conf [Time] NTP=$DHCP4_NTP_SERVERS RootDistanceMaxSec=15 EOF systemctl restart systemd-timesyncd ;; down) rm -f /etc/systemd/timesyncd.conf.d/$CONNECTION_UUID.conf systemctl restart systemd-timesyncd ;; esac ==8<=8<=8<=8<=8<== ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: network-manager 1.30.0-1ubuntu3 ProcVersionSignature: Ubuntu 5.11.0-18.19+21.10.1-generic 5.11.17 Uname: Linux 5.11.0-18-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu67 Architecture: amd64 CasperMD5CheckResult: unknown CurrentDesktop: ubuntu:GNOME Date: Mon Jun 28 14:08:52 2021 InstallationDate: Installed on 2020-05-31 (393 days ago) InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Alpha amd64 (20200527) RebootRequiredPkgs: linux-image-5.11.0-20-generic linux-base SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.30.0 connected started full enabled enabled disabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1933828/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945912] Re: Shows Blank Screen on boot
That's correct, 'nomodeset' disables the graphics driver so things will stop working. Please remove 'nomodeset' and then open a new bug about whatever the original problem was. ** Package changed: xorg-server (Ubuntu) => ubuntu ** Changed in: ubuntu Status: New => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1945912 Title: Shows Blank Screen on boot Status in Ubuntu: Invalid Bug description: I tried setting nomodeset, it allowed me to boot but i am not able to control brightness and other stuff. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.11.0-37.41~20.04.2-generic 5.11.22 Uname: Linux 5.11.0-37-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Mon Oct 4 00:18:00 2021 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes, including running git bisection searches GraphicsCard: Intel Corporation UHD Graphics 620 [8086:5917] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company UHD Graphics 620 [103c:8486] InstallationDate: Installed on 2021-09-30 (3 days ago) InstallationMedia: Ubuntu 20.04.3 LTS "Focal Fossa" - Release amd64 (20210819) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 8087:0aa7 Intel Corp. Bus 001 Device 002: ID 04ca:707f Lite-On Technology Corp. HP Wide Vision HD Camera Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: HP HP Pavilion x360 Convertible 14m-cd0xxx ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-37-generic root=UUID=324db856-0b72-481c-bdd2-28b5942e136b ro quiet splash nomodeset vt.handoff=7 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/23/2020 dmi.bios.release: 15.37 dmi.bios.vendor: Insyde dmi.bios.version: F.37 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: 8486 dmi.board.vendor: HP dmi.board.version: 72.23 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 31 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.ec.firmware.release: 72.23 dmi.modalias: dmi:bvnInsyde:bvrF.37:bd11/23/2020:br15.37:efr72.23:svnHP:pnHPPavilionx360Convertible14m-cd0xxx:pvrType1ProductConfigId:sku3XV03UA#ABA:rvnHP:rn8486:rvr72.23:cvnHP:ct31:cvrChassisVersion: dmi.product.family: 103C_5335KV HP Pavilion dmi.product.name: HP Pavilion x360 Convertible 14m-cd0xxx dmi.product.sku: 3XV03UA#ABA dmi.product.version: Type1ProductConfigId dmi.sys.vendor: HP version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.105-3~20.04.2 version.libgl1-mesa-dri: libgl1-mesa-dri 21.0.3-0ubuntu0.3~20.04.2 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.11-1ubuntu1~20.04.2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1945912/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945900] Re: icons in app launcher subfolders are too small
Thanks for the bug report. Please try disabling 'Ubuntu Dock' in the 'Extensions' app. Then tell us if the problem still occurs after you have logged in again. ** Changed in: gnome-shell (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-shell in Ubuntu. https://bugs.launchpad.net/bugs/1945900 Title: icons in app launcher subfolders are too small Status in gnome-shell package in Ubuntu: Incomplete Bug description: Relatively fresh install just after installing updates and a few pieces of software. Not sure what other info is needed other than all the info in the attachment but let me know if there is anything else. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: gnome-shell 40.5-1ubuntu1 ProcVersionSignature: Ubuntu 5.13.0-16.16-generic 5.13.13 Uname: Linux 5.13.0-16-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu69 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sun Oct 3 11:12:59 2021 DisplayManager: gdm3 InstallationDate: Installed on 2021-10-03 (0 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Beta amd64 (20210922) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: mutter-common 40.5-1ubuntu1 SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1945900/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945852] Re: [Dell Vostro 3500] sound strange noise - pulseaudio
** Summary changed: - sound strange noise - pulseaudio + [Dell Vostro 3500] sound strange noise - pulseaudio -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1945852 Title: [Dell Vostro 3500] sound strange noise - pulseaudio Status in pulseaudio package in Ubuntu: New Bug description: The sound from the speakers and headphones is distorted when the system startup. Has some strange disturbance in sound. If I issue "pulseausio -k; pulseaudio --start" the sound is correct but when another startup problem is come back. Reinstalling pulseaudio and alsa does not help. Actually my pulseaudio version is 1:13.99.1-1ubuntu3.11. I try under ubuntu 20.04.3 LTS and 21.04 but it is the same bug. Installing another newer kernel doesn't help either. The card is HDA Intel PCH, Cirrus Logic CS8409 / CS42L42 chip (Dell Vostro 3500). ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: pulseaudio 1:13.99.1-1ubuntu3.11 ProcVersionSignature: Ubuntu 5.11.0-37.41~20.04.2-generic 5.11.22 Uname: Linux 5.11.0-37-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.20 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: bartek 3166 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sat Oct 2 09:02:58 2021 InstallationDate: Installed on 2021-10-02 (0 days ago) InstallationMedia: Ubuntu 20.04.3 LTS "Focal Fossa" - Release amd64 (20210819) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=pl_PL.UTF-8 SHELL=/bin/bash SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/19/2021 dmi.bios.release: 1.8 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.8.0 dmi.board.name: 0GGCMJ dmi.board.vendor: Dell Inc. dmi.board.version: A01 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.8.0:bd07/19/2021:br1.8:svnDellInc.:pnVostro3500:pvr:sku0A24:rvnDellInc.:rn0GGCMJ:rvrA01:cvnDellInc.:ct10:cvr: dmi.product.family: Vostro dmi.product.name: Vostro 3500 dmi.product.sku: 0A24 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1945852/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1945805] Re: Screen Won't Come Back After Blank Screen
*** This bug is a duplicate of bug 1944397 *** https://bugs.launchpad.net/bugs/1944397 It appears the vc4 kernel driver (Broadcom GPU) is crashing a lot in HDMI functions. We should treat this as a duplicate of bug 1944397 until proven otherwise. ** Package changed: xorg (Ubuntu) => linux-raspi (Ubuntu) ** This bug has been marked a duplicate of bug 1944397 HDMI does not display anything with Impish RPi desktop image -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg in Ubuntu. https://bugs.launchpad.net/bugs/1945805 Title: Screen Won't Come Back After Blank Screen Status in linux-raspi package in Ubuntu: New Bug description: The Power Saving option was set for the screen to go blank after five minutes. After the update, the screen will now not come back on when the mouse or keyboard is utilized. The computer appears to be still operational as it's registering keystrokes, but it must be restarted in order for the screen to come back up. ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: xorg 1:7.7+22ubuntu1 ProcVersionSignature: Ubuntu 5.11.0-1019.20-raspi 5.11.22 Uname: Linux 5.11.0-1019-raspi aarch64 ApportVersion: 2.20.11-0ubuntu65.3 Architecture: arm64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: unknown CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Fri Oct 1 10:22:59 2021 DistUpgraded: 2021-08-11 11:39:13,437 DEBUG Running PostInstallScript: '/usr/lib/ubuntu-advantage/upgrade_lts_contract.py' DistroCodename: hirsute DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: ImageMediaBuild: 20201022 Lspci-vt: -[:00]---00.0-[01]00.0 VIA Technologies, Inc. VL805 USB 3.0 Host Controller Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 248a:8367 Maxxter Telink Wireless Receiver Bus 001 Device 003: ID 0424:2504 Microchip Technology, Inc. (formerly SMSC) Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1680x1050M@60 video=HDMI-A-2:1680x1050M@60 smsc95xx.macaddr=DC:A6:32:B4:5C:3E vc_mem.mem_base=0x3ec0 vc_mem.mem_size=0x4000 dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc quiet splash SourcePackage: xorg Symptom: display UpgradeStatus: Upgraded to hirsute on 2021-08-11 (50 days ago) acpidump: version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.105-3~21.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 21.0.3-0ubuntu0.3 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.11-1ubuntu1.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2 version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1945805/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp