[Desktop-packages] [Bug 1811169] Re: Device firmware update does not detect AC power
Maybe a small detail which may have an impact: the laptop has SecureBoot enabled by default. During the installation, the Ubuntu installer made me go about setting a password. After installing Virtualbox I noticed that I had to do some extra steps into signing the compiled kernel module. I have followed the procedures correctly, but afterwards decided to turn off Secure Boot just to not wanting to deal with the upgrade hassle in the future. I don't remember between which boots I disabled SecureBoot and when I started the firmware update successfully. I do remember the annoyance of the firmware upgrade processes beeping every couple of seconds during the long procedure, in an open workspace environment. Because it's usually a bad idea to terminate a firmware flash right in the middle I had to run away with my "ticking timebomb". But I divert, this has nothing to do with actually setting up the firmware upgrade through Gnome-Software/fwupd. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-software in Ubuntu. https://bugs.launchpad.net/bugs/1811169 Title: Device firmware update does not detect AC power Status in fwupd package in Ubuntu: Invalid Status in gnome-software package in Ubuntu: Incomplete Bug description: On a freshly installed Ubuntu 18.10 on a Lenovo T580, the Gnome Software center after awhile proposes to install a couple of firmware related updates. At first the AC wasn't connected, and upon trying to install either of the updates, a popup appears saying that the update cannot continue without the AC being plugged in. This is so far expected behavior. But even after connecting the laptop to the AC power supply, the message persists, making it not possible to continue with the firmware updates. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: gnome-software 3.30.2-0ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-13.14-generic 4.18.17 Uname: Linux 4.18.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Jan 10 00:59:20 2019 ExecutablePath: /usr/bin/gnome-software InstallationDate: Installed on 2019-01-09 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) InstalledPlugins: gnome-software-plugin-flatpak N/A gnome-software-plugin-limba N/A gnome-software-plugin-snap3.30.2-0ubuntu8 SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fwupd/+bug/1811169/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1811169] Re: Device firmware update does not detect AC power
Added fwupd for reference ** Attachment added: "fwupd logs" https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1811169/+attachment/5229217/+files/fwupd.log -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-software in Ubuntu. https://bugs.launchpad.net/bugs/1811169 Title: Device firmware update does not detect AC power Status in fwupd package in Ubuntu: Invalid Status in gnome-software package in Ubuntu: Incomplete Bug description: On a freshly installed Ubuntu 18.10 on a Lenovo T580, the Gnome Software center after awhile proposes to install a couple of firmware related updates. At first the AC wasn't connected, and upon trying to install either of the updates, a popup appears saying that the update cannot continue without the AC being plugged in. This is so far expected behavior. But even after connecting the laptop to the AC power supply, the message persists, making it not possible to continue with the firmware updates. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: gnome-software 3.30.2-0ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-13.14-generic 4.18.17 Uname: Linux 4.18.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Jan 10 00:59:20 2019 ExecutablePath: /usr/bin/gnome-software InstallationDate: Installed on 2019-01-09 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) InstalledPlugins: gnome-software-plugin-flatpak N/A gnome-software-plugin-limba N/A gnome-software-plugin-snap3.30.2-0ubuntu8 SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fwupd/+bug/1811169/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1811169] Re: Device firmware update does not detect AC power
Sorry for the delay in following up. Based on the logs I've checked, fwupd has been behaving correctly, no where in the various boot logs have I seen it crash or output anything that would look like an issue. However, I've been seeing many issues from Gnome Software. ** Attachment added: "Gnome Software logs" https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1811169/+attachment/5229216/+files/gnome-software.log -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-software in Ubuntu. https://bugs.launchpad.net/bugs/1811169 Title: Device firmware update does not detect AC power Status in fwupd package in Ubuntu: Invalid Status in gnome-software package in Ubuntu: Incomplete Bug description: On a freshly installed Ubuntu 18.10 on a Lenovo T580, the Gnome Software center after awhile proposes to install a couple of firmware related updates. At first the AC wasn't connected, and upon trying to install either of the updates, a popup appears saying that the update cannot continue without the AC being plugged in. This is so far expected behavior. But even after connecting the laptop to the AC power supply, the message persists, making it not possible to continue with the firmware updates. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: gnome-software 3.30.2-0ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-13.14-generic 4.18.17 Uname: Linux 4.18.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Jan 10 00:59:20 2019 ExecutablePath: /usr/bin/gnome-software InstallationDate: Installed on 2019-01-09 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) InstalledPlugins: gnome-software-plugin-flatpak N/A gnome-software-plugin-limba N/A gnome-software-plugin-snap3.30.2-0ubuntu8 SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/fwupd/+bug/1811169/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1811169] Re: Device firmware update does not detect AC power
After a reboot, clicking on the Update buttons don't complain about connecting to the AC power. The options briefly disappear, and then reappear, seemingly as if the options weren't accepted. But after another reboot, the bios noticed that there were pending updates and went on to apply both of them after 2 reboots. After the whole procedure the updates don't appear anymore in the Software center, making me believe that it was executed successfully. I seems that the issue could be closed, unless you would consider this an interaction bug. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-software in Ubuntu. https://bugs.launchpad.net/bugs/1811169 Title: Device firmware update does not detect AC power Status in gnome-software package in Ubuntu: New Bug description: On a freshly installed Ubuntu 18.10 on a Lenovo T580, the Gnome Software center after awhile proposes to install a couple of firmware related updates. At first the AC wasn't connected, and upon trying to install either of the updates, a popup appears saying that the update cannot continue without the AC being plugged in. This is so far expected behavior. But even after connecting the laptop to the AC power supply, the message persists, making it not possible to continue with the firmware updates. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: gnome-software 3.30.2-0ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-13.14-generic 4.18.17 Uname: Linux 4.18.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Jan 10 00:59:20 2019 ExecutablePath: /usr/bin/gnome-software InstallationDate: Installed on 2019-01-09 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) InstalledPlugins: gnome-software-plugin-flatpak N/A gnome-software-plugin-limba N/A gnome-software-plugin-snap3.30.2-0ubuntu8 SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1811169/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1811169] [NEW] Device firmware update does not detect AC power
Public bug reported: On a freshly installed Ubuntu 18.10 on a Lenovo T580, the Gnome Software center after awhile proposes to install a couple of firmware related updates. At first the AC wasn't connected, and upon trying to install either of the updates, a popup appears saying that the update cannot continue without the AC being plugged in. This is so far expected behavior. But even after connecting the laptop to the AC power supply, the message persists, making it not possible to continue with the firmware updates. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: gnome-software 3.30.2-0ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-13.14-generic 4.18.17 Uname: Linux 4.18.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Jan 10 00:59:20 2019 ExecutablePath: /usr/bin/gnome-software InstallationDate: Installed on 2019-01-09 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) InstalledPlugins: gnome-software-plugin-flatpak N/A gnome-software-plugin-limba N/A gnome-software-plugin-snap3.30.2-0ubuntu8 SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gnome-software (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug cosmic lvfs -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-software in Ubuntu. https://bugs.launchpad.net/bugs/1811169 Title: Device firmware update does not detect AC power Status in gnome-software package in Ubuntu: New Bug description: On a freshly installed Ubuntu 18.10 on a Lenovo T580, the Gnome Software center after awhile proposes to install a couple of firmware related updates. At first the AC wasn't connected, and upon trying to install either of the updates, a popup appears saying that the update cannot continue without the AC being plugged in. This is so far expected behavior. But even after connecting the laptop to the AC power supply, the message persists, making it not possible to continue with the firmware updates. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: gnome-software 3.30.2-0ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-13.14-generic 4.18.17 Uname: Linux 4.18.0-13-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Thu Jan 10 00:59:20 2019 ExecutablePath: /usr/bin/gnome-software InstallationDate: Installed on 2019-01-09 (0 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) InstalledPlugins: gnome-software-plugin-flatpak N/A gnome-software-plugin-limba N/A gnome-software-plugin-snap3.30.2-0ubuntu8 SourcePackage: gnome-software UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-software/+bug/1811169/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1767411] [NEW] Icons in subject message rendered too big
Public bug reported: When an icon is deplayed inside the Subject field of a message Thunderbird renders it too big. Example of a UTF8 character being rendered as way too big icon in the message source: subject: =?utf-8?q?=F0=9F=94=8C?= Het is weer gelukt: veiling was een succes! ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: thunderbird 1:52.7.0+build1-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: carroarmato0 1641 F pulseaudio /dev/snd/controlC0: carroarmato0 1641 F pulseaudio BuildID: 20180416164209 Channel: Unavailable CurrentDesktop: ubuntu:GNOME Date: Fri Apr 27 17:17:59 2018 ExecutablePath: /usr/lib/thunderbird/thunderbird Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2018-04-27 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) IpRoute: default via 192.168.20.1 dev wlp3s0 proto dhcp metric 600 169.254.0.0/16 dev wlp3s0 scope link metric 1000 192.168.20.0/24 dev wlp3s0 proto kernel scope link src 192.168.20.220 metric 600 Locales: extensions.sqlite corrupt or missing PrefSources: prefs.js Prefs: extensions.lastAppVersion: "52.7.0" (prefs.js) network.cookie.prefsMigrated: true (prefs.js) network.predictor.cleaned-up: true (prefs.js) places.database.lastMaintenance: 1524839666 (prefs.js) places.history.expiration.transient_current_max_pages: 122334 (prefs.js) Profiles: Profile0 (Default) - LastVersion=52.7.0/20180416164209 (In use) RunningIncompatibleAddons: False SourcePackage: thunderbird Themes: extensions.sqlite corrupt or missing UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/25/2016 dmi.bios.vendor: LENOVO dmi.bios.version: JBET60WW (1.24 ) dmi.board.asset.tag: Not Available dmi.board.name: 20BX004QMB dmi.board.vendor: LENOVO dmi.board.version: SDK0J40705 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrJBET60WW(1.24):bd05/25/2016:svnLENOVO:pn20BX004QMB:pvrThinkPadT450s:rvnLENOVO:rn20BX004QMB:rvrSDK0J40705WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad T450s dmi.product.name: 20BX004QMB dmi.product.version: ThinkPad T450s dmi.sys.vendor: LENOVO ** Affects: thunderbird (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic ** Attachment added: "Screenshot from 2018-04-27 17-24-18.png" https://bugs.launchpad.net/bugs/1767411/+attachment/5128559/+files/Screenshot%20from%202018-04-27%2017-24-18.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to thunderbird in Ubuntu. https://bugs.launchpad.net/bugs/1767411 Title: Icons in subject message rendered too big Status in thunderbird package in Ubuntu: New Bug description: When an icon is deplayed inside the Subject field of a message Thunderbird renders it too big. Example of a UTF8 character being rendered as way too big icon in the message source: subject: =?utf-8?q?=F0=9F=94=8C?= Het is weer gelukt: veiling was een succes! ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: thunderbird 1:52.7.0+build1-0ubuntu1 ProcVersionSignature: Ubuntu 4.15.0-20.21-generic 4.15.17 Uname: Linux 4.15.0-20-generic x86_64 AddonCompatCheckDisabled: False ApportVersion: 2.20.9-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: carroarmato0 1641 F pulseaudio /dev/snd/controlC0: carroarmato0 1641 F pulseaudio BuildID: 20180416164209 Channel: Unavailable CurrentDesktop: ubuntu:GNOME Date: Fri Apr 27 17:17:59 2018 ExecutablePath: /usr/lib/thunderbird/thunderbird Extensions: extensions.sqlite corrupt or missing ForcedLayersAccel: False IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback IncompatibleExtensions: Unavailable (corrupt or non-existant compatibility.ini or extensions.sqlite) InstallationDate: Installed on 2018-04-27 (0 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) IpRoute: default via 192.168.20.1 dev wlp3s0 proto dhcp metric 600 169.254.0.0/16 dev wlp3s0 scope link metric 1000 192.168.20.0/24 dev wlp3s0 proto kernel scope link src 192.168.20.220 metric 600 Locales: extensions.sqlite corrupt or missing PrefSources: prefs.js Prefs: extensions.lastAppVersion: "52.7.0" (prefs.j
[Desktop-packages] [Bug 1593611] [NEW] flashplugin-installer: Can't drop priviledges for downloading as file Warning
Public bug reported: flashplugin-installer: downloading http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_20160616.1.orig.tar.gz Get:1 http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_20160616.1.orig.tar.gz [27,1 MB] Fetched 27,1 MB in 8s (3.125 kB/s) W: Can't drop privileges for downloading as file '/var/lib/update-notifier/package-data-downloads/partial/adobe-flashplugin_20160616.1.orig.tar.gz' couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied) Installing from local file /var/lib/update-notifier/package-data-downloads/partial/adobe-flashplugin_20160616.1.orig.tar.gz Flash Plugin installed. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: flashplugin-installer 11.2.202.626ubuntu0.16.04.1 ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Jun 17 09:50:33 2016 InstallationDate: Installed on 2016-04-26 (51 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: flashplugin-nonfree UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: flashplugin-nonfree (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to flashplugin-nonfree in Ubuntu. https://bugs.launchpad.net/bugs/1593611 Title: flashplugin-installer: Can't drop priviledges for downloading as file Warning Status in flashplugin-nonfree package in Ubuntu: New Bug description: flashplugin-installer: downloading http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_20160616.1.orig.tar.gz Get:1 http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_20160616.1.orig.tar.gz [27,1 MB] Fetched 27,1 MB in 8s (3.125 kB/s) W: Can't drop privileges for downloading as file '/var/lib/update-notifier/package-data-downloads/partial/adobe-flashplugin_20160616.1.orig.tar.gz' couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied) Installing from local file /var/lib/update-notifier/package-data-downloads/partial/adobe-flashplugin_20160616.1.orig.tar.gz Flash Plugin installed. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: flashplugin-installer 11.2.202.626ubuntu0.16.04.1 ProcVersionSignature: Ubuntu 4.4.0-24.43-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Fri Jun 17 09:50:33 2016 InstallationDate: Installed on 2016-04-26 (51 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: flashplugin-nonfree UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/flashplugin-nonfree/+bug/1593611/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 995290] Re: Launcher icon associated with wrong application instance
I don't recall having seen this issue ever again. Can be closed for my part. ** Changed in: unity Status: Incomplete = Invalid ** Changed in: unity (Ubuntu) Status: Incomplete = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/995290 Title: Launcher icon associated with wrong application instance Status in Unity: Invalid Status in unity package in Ubuntu: Invalid Bug description: I got into this strange situation where the Google Chrome icon in the Launcher thinks that other applications such as the Terminal are associated to it. I don't know how to reproduce this bug. I've included 2 screenshots where you can see that according to the Launcher, Google Chrome is the only active application on the Desktop. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: unity 5.10.0-0ubuntu6 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] Date: Sun May 6 00:45:35 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) SourcePackage: unity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/995290/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1105453] [NEW] gEdit hangs when searching a minimized css file
Public bug reported: I tried searching for ps_main using the Search function in gEdit and it just hung on me. Steps to reproduce: 1) start gedit 2) open de supplied css file 3) notice that for a file that's just 217,6kB big, and has 217630 lines, it load a bit slow 4) Use the search function to find ps_main 5) notice gedit hanging up, the program gets darkened due to not responding ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: gedit 3.6.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-22.34-generic 3.5.7.2 Uname: Linux 3.5.0-22-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 Date: Fri Jan 25 22:18:11 2013 InstallationDate: Installed on 2012-12-05 (51 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MarkForUpload: True SourcePackage: gedit UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gedit (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug quantal running-unity ** Attachment added: The css file where the problem arises https://bugs.launchpad.net/bugs/1105453/+attachment/3500600/+files/combined.css -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gedit in Ubuntu. https://bugs.launchpad.net/bugs/1105453 Title: gEdit hangs when searching a minimized css file Status in “gedit” package in Ubuntu: New Bug description: I tried searching for ps_main using the Search function in gEdit and it just hung on me. Steps to reproduce: 1) start gedit 2) open de supplied css file 3) notice that for a file that's just 217,6kB big, and has 217630 lines, it load a bit slow 4) Use the search function to find ps_main 5) notice gedit hanging up, the program gets darkened due to not responding ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: gedit 3.6.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.5.0-22.34-generic 3.5.7.2 Uname: Linux 3.5.0-22-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.6.1-0ubuntu9 Architecture: amd64 Date: Fri Jan 25 22:18:11 2013 InstallationDate: Installed on 2012-12-05 (51 days ago) InstallationMedia: Ubuntu 12.10 Quantal Quetzal - Release amd64 (20121017.5) MarkForUpload: True SourcePackage: gedit UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gedit/+bug/1105453/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1061826] Re: Unity Dash Is Too Small for Its Exclusivity
I'd like to point out that when you open the Dash, there are Close, Minimise and Maximise buttons on the top-left part of the screen. Pressing Maximise makes the Ubuntu Dash use all of the available screen space, and your choice is then persistent even when you log out and back in. ** Changed in: unity (Ubuntu) Status: Confirmed = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to unity in Ubuntu. Matching subscriptions: dp-unity https://bugs.launchpad.net/bugs/1061826 Title: Unity Dash Is Too Small for Its Exclusivity Status in “unity” package in Ubuntu: Invalid Bug description: Once launched, the Unity Dash is completely exclusive (you can't do any other application task while it is open). So WHY then, is it not using the entire screen (like GNOME3 Activity Menu does)? If you can't do anything else anyway (while you are using the Unity dash), why not use all the screen real-estate available, given that the Unity dash is already very cumbersome for surveying applications (meaning: just looking through all the applications you have installed). Utilising this extra screen space would result in less scrolling, because more applications would be displayed at any given time. I have over 325 applications that (In Unity) are NOT hierarchically categorised (without cumbersome filter button steps)! I remember back in Ubuntu 7.04, when I did a screen cast where I showed all the applications that were in Ubuntu's menus: http://www.lonniebest.com/UbuntuInstall This is what I mean by Surveying the Applications You Have. Unity Dash is way less friendly to new users than that was (above) in Ubuntu 7.04. But at this point I'm going beyond the scope of this bug report. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: unity 6.6.0-0ubuntu3 ProcVersionSignature: Ubuntu 3.5.0-16.25-generic 3.5.4 Uname: Linux 3.5.0-16-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.6.1-0ubuntu1 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,vpswitch,snap,mousepoll,resize,place,move,wall,grid,regex,imgpng,session,gnomecompat,animation,fade,unitymtgrabhandles,workarounds,scale,expo,ezoom,unityshell] Date: Thu Oct 4 13:57:43 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: unity UpgradeStatus: Upgraded to quantal on 2012-10-04 (0 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1061826/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1000968] [NEW] Paste grayed out when copy or cutting something
Public bug reported: When I cut or copy a selection of files, the Paste option in the right- mouse-menu is grayed out. The option however still works. It's just a cosmetic regression. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: nautilus 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Thu May 17 22:15:24 2012 GsettingsChanges: org.gnome.nautilus.window-state geometry '799x370+87+366' InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: nautilus (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug precise -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1000968 Title: Paste grayed out when copy or cutting something Status in “nautilus” package in Ubuntu: New Bug description: When I cut or copy a selection of files, the Paste option in the right-mouse-menu is grayed out. The option however still works. It's just a cosmetic regression. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: nautilus 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Thu May 17 22:15:24 2012 GsettingsChanges: org.gnome.nautilus.window-state geometry '799x370+87+366' InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1000968/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1000968] Re: Paste grayed out when copy or cutting something
** Description changed: - When I cut of copy a selection of files, the Paste option in the right- + When I cut or copy a selection of files, the Paste option in the right- mouse-menu is grayed out. The option however still works. It's just a cosmetic regression. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: nautilus 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Thu May 17 22:15:24 2012 GsettingsChanges: org.gnome.nautilus.window-state geometry '799x370+87+366' InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1000968 Title: Paste grayed out when copy or cutting something Status in “nautilus” package in Ubuntu: New Bug description: When I cut or copy a selection of files, the Paste option in the right-mouse-menu is grayed out. The option however still works. It's just a cosmetic regression. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: nautilus 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Thu May 17 22:15:24 2012 GsettingsChanges: org.gnome.nautilus.window-state geometry '799x370+87+366' InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1000968/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1000968] Re: Paste grayed out when copy or cutting something
*** This bug is a duplicate of bug 988251 *** https://bugs.launchpad.net/bugs/988251 Interesting, this bug seems to not always manifest itself. Will have to figure out in which situations this bug gets triggered. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nautilus in Ubuntu. https://bugs.launchpad.net/bugs/1000968 Title: Paste grayed out when copy or cutting something Status in “nautilus” package in Ubuntu: New Bug description: When I cut or copy a selection of files, the Paste option in the right-mouse-menu is grayed out. The option however still works. It's just a cosmetic regression. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: nautilus 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Thu May 17 22:15:24 2012 GsettingsChanges: org.gnome.nautilus.window-state geometry '799x370+87+366' InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Release amd64 (20120425) SourcePackage: nautilus UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1000968/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 993857] [NEW] Top Panel still visible although semi-transparent when starting a presentation
Public bug reported: I installed the libreoffice-presenter-console package. When launching a presentation on a second screen, I can still see a semi-transparent black line at the top of the presentation corresponding to the Top Panel of Ubuntu. I've attached a screenshot of when starting a presentation with 2 screens. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: libreoffice-presenter-console 1.1.0+LibO3.5.2-2ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Thu May 3 11:39:47 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) SourcePackage: libreoffice UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: libreoffice (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug precise -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/993857 Title: Top Panel still visible although semi-transparent when starting a presentation Status in “libreoffice” package in Ubuntu: New Bug description: I installed the libreoffice-presenter-console package. When launching a presentation on a second screen, I can still see a semi-transparent black line at the top of the presentation corresponding to the Top Panel of Ubuntu. I've attached a screenshot of when starting a presentation with 2 screens. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: libreoffice-presenter-console 1.1.0+LibO3.5.2-2ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Thu May 3 11:39:47 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) SourcePackage: libreoffice UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/993857/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 993857] Re: Top Panel still visible although semi-transparent when starting a presentation
** Attachment added: Screenshot from 2012-05-03 11:43:31.png https://bugs.launchpad.net/bugs/993857/+attachment/3127324/+files/Screenshot%20from%202012-05-03%2011%3A43%3A31.png -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/993857 Title: Top Panel still visible although semi-transparent when starting a presentation Status in “libreoffice” package in Ubuntu: New Bug description: I installed the libreoffice-presenter-console package. When launching a presentation on a second screen, I can still see a semi-transparent black line at the top of the presentation corresponding to the Top Panel of Ubuntu. I've attached a screenshot of when starting a presentation with 2 screens. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: libreoffice-presenter-console 1.1.0+LibO3.5.2-2ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.0.1-0ubuntu7 Architecture: amd64 Date: Thu May 3 11:39:47 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) SourcePackage: libreoffice UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/993857/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986991] Re: Hostname left to ubuntu-0 in Bluetooth settings after install from live cd
Maybe the $HOSTNAME variable isn't present when rc.local gets executed, or maybe the command gets executed, but when the Bluetooth managers starts it changes that again to the wrong hostname? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/986991 Title: Hostname left to ubuntu-0 in Bluetooth settings after install from live cd Status in “gnome-control-center” package in Ubuntu: Confirmed Bug description: After installing from a live-cd session when given a hostname to the machine, the hostname is applied, but for some reason the live cd hostname ubuntu-0 is being shown in the bluetooth settings instead of the user's chosen hostname. Also: the name gets reset to ubuntu-0 after reboots when you change it manually with hciconfig ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 22:04:32 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu3 deja-dup22.0-0ubuntu2 gnome-bluetooth 3.2.2-0ubuntu5 indicator-datetime 0.3.94-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/986991/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 990170] Re: Moving the mouse while playing a video in fullscreen doesn't show the control bar
Seem like it doesn't happen anymore. Invalidating the bug ** Changed in: totem (Ubuntu) Status: New = Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to totem in Ubuntu. https://bugs.launchpad.net/bugs/990170 Title: Moving the mouse while playing a video in fullscreen doesn't show the control bar Status in “totem” package in Ubuntu: Invalid Bug description: When playinga movie in fullscreen, the control pannel at the bottom doesn't appear, and neither does the cursor ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: totem 3.0.1-0ubuntu21 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu6 Architecture: amd64 Date: Sat Apr 28 00:44:06 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) SourcePackage: totem UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/totem/+bug/990170/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 990170] [NEW] Moving the mouse while playing a video in fullscreen doesn't show the control bar
Public bug reported: When playinga movie in fullscreen, the control pannel at the bottom doesn't appear, and neither does the cursor ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: totem 3.0.1-0ubuntu21 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu6 Architecture: amd64 Date: Sat Apr 28 00:44:06 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) SourcePackage: totem UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: totem (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug precise -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to totem in Ubuntu. https://bugs.launchpad.net/bugs/990170 Title: Moving the mouse while playing a video in fullscreen doesn't show the control bar Status in “totem” package in Ubuntu: New Bug description: When playinga movie in fullscreen, the control pannel at the bottom doesn't appear, and neither does the cursor ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: totem 3.0.1-0ubuntu21 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu6 Architecture: amd64 Date: Sat Apr 28 00:44:06 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) SourcePackage: totem UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/totem/+bug/990170/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 990170] Re: Moving the mouse while playing a video in fullscreen doesn't show the control bar
-- You received this bug notification because you are a member of Desktop Packages, which is subscribed to totem in Ubuntu. https://bugs.launchpad.net/bugs/990170 Title: Moving the mouse while playing a video in fullscreen doesn't show the control bar Status in “totem” package in Ubuntu: New Bug description: When playinga movie in fullscreen, the control pannel at the bottom doesn't appear, and neither does the cursor ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: totem 3.0.1-0ubuntu21 ProcVersionSignature: Ubuntu 3.2.0-24.37-generic 3.2.14 Uname: Linux 3.2.0-24-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu6 Architecture: amd64 Date: Sat Apr 28 00:44:06 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) SourcePackage: totem UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/totem/+bug/990170/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986991] Re: Hostname left to ubuntu-0 in Bluetooth settings after install from live cd
** Description changed: After installing from a live-cd session when given a hostname to the machine, the hostname is applied, but for some reason the live cd - hostname ubuntu-0 is being shown in the blutooth settings instead of + hostname ubuntu-0 is being shown in the bluetooth settings instead of the user's chosen hostname. Also: the name gets reset to ubuntu-0 after reboots when you change it manually with hciconfig ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 22:04:32 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu3 deja-dup22.0-0ubuntu2 gnome-bluetooth 3.2.2-0ubuntu5 indicator-datetime 0.3.94-0ubuntu2 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/986991 Title: Hostname left to ubuntu-0 in Bluetooth settings after install from live cd Status in “gnome-control-center” package in Ubuntu: Confirmed Bug description: After installing from a live-cd session when given a hostname to the machine, the hostname is applied, but for some reason the live cd hostname ubuntu-0 is being shown in the bluetooth settings instead of the user's chosen hostname. Also: the name gets reset to ubuntu-0 after reboots when you change it manually with hciconfig ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 22:04:32 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu3 deja-dup22.0-0ubuntu2 gnome-bluetooth 3.2.2-0ubuntu5 indicator-datetime 0.3.94-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/986991/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986983] Re: Opening Empthay from the Indicator also opens the Preference window
Is it not a bug because you can't reproduce it? Or because it's a feature ? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/986983 Title: Opening Empthay from the Indicator also opens the Preference window Status in “empathy” package in Ubuntu: Invalid Bug description: When clicking on Empathy's icon in from the Indicator, the Preference window of Empathy opens up as well. I have right-clicked on Empathy's icon in Unity and selected Open Preferences before, and since then it keeps happening, although I'm not sure if it was that that triggered the bug. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: empathy 3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 21:43:33 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: empathy UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/986983/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986983] Re: Opening Empthay from the Indicator also opens the Preference window
Here, I've made a screencast showing how Empathy behaves normally, and what happens when you open the Preferences Window from the icon in the Unity Launcher. ** Attachment added: Empathy Preferences Bug.webm https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/986983/+attachment/3102431/+files/Empathy%20Preferences%20Bug.webm -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/986983 Title: Opening Empthay from the Indicator also opens the Preference window Status in “empathy” package in Ubuntu: Invalid Bug description: When clicking on Empathy's icon in from the Indicator, the Preference window of Empathy opens up as well. I have right-clicked on Empathy's icon in Unity and selected Open Preferences before, and since then it keeps happening, although I'm not sure if it was that that triggered the bug. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: empathy 3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 21:43:33 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: empathy UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/986983/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986991] Re: Hostname left to ubuntu-0 in Bluetooth settings after install from live cd
** Description changed: After installing from a live-cd session when given a hostname to the machine, the hostname is applied, but for some reason the live cd hostname ubuntu-0 is being shown in the blutooth settings instead of the user's chosen hostname. + + Also: the name gets reset to ubuntu-0 after reboots when you change it + manually with hciconfig ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 22:04:32 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: - TERM=xterm - PATH=(custom, no user) - LANG=en_US.UTF-8 - SHELL=/bin/bash + TERM=xterm + PATH=(custom, no user) + LANG=en_US.UTF-8 + SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: - activity-log-manager-control-center 0.9.4-0ubuntu3 - deja-dup22.0-0ubuntu2 - gnome-bluetooth 3.2.2-0ubuntu5 - indicator-datetime 0.3.94-0ubuntu2 + activity-log-manager-control-center 0.9.4-0ubuntu3 + deja-dup22.0-0ubuntu2 + gnome-bluetooth 3.2.2-0ubuntu5 + indicator-datetime 0.3.94-0ubuntu2 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/986991 Title: Hostname left to ubuntu-0 in Bluetooth settings after install from live cd Status in “gnome-control-center” package in Ubuntu: New Bug description: After installing from a live-cd session when given a hostname to the machine, the hostname is applied, but for some reason the live cd hostname ubuntu-0 is being shown in the blutooth settings instead of the user's chosen hostname. Also: the name gets reset to ubuntu-0 after reboots when you change it manually with hciconfig ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 22:04:32 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu3 deja-dup22.0-0ubuntu2 gnome-bluetooth 3.2.2-0ubuntu5 indicator-datetime 0.3.94-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/986991/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986983] Re: Opening Empthay from the Indicator also opens the Preference window
Yes, but I think this is still a bug because when I Right-Click on Open Preferences in the icon, I expect this to happen 1 time only. Not every time I open the contact list after that. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/986983 Title: Opening Empthay from the Indicator also opens the Preference window Status in “empathy” package in Ubuntu: Incomplete Bug description: When clicking on Empathy's icon in from the Indicator, the Preference window of Empathy opens up as well. I have right-clicked on Empathy's icon in Unity and selected Open Preferences before, and since then it keeps happening, although I'm not sure if it was that that triggered the bug. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: empathy 3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 21:43:33 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: empathy UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/986983/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986983] [NEW] Opening Empthay from the Indicator also opens the Preference window
Public bug reported: When clicking on Empathy's icon in from the Indicator, the Preference window of Empathy opens up as well. I have right-clicked on Empathy's icon in Unity and selected Open Preferences before, and since then it keeps happening, although I'm not sure if it was that that triggered the bug. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: empathy 3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 21:43:33 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: empathy UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: empathy (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug precise -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/986983 Title: Opening Empthay from the Indicator also opens the Preference window Status in “empathy” package in Ubuntu: New Bug description: When clicking on Empathy's icon in from the Indicator, the Preference window of Empathy opens up as well. I have right-clicked on Empathy's icon in Unity and selected Open Preferences before, and since then it keeps happening, although I'm not sure if it was that that triggered the bug. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: empathy 3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 21:43:33 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: empathy UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/986983/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986983] Re: Opening Empthay from the Indicator also opens the Preference window
-- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/986983 Title: Opening Empthay from the Indicator also opens the Preference window Status in “empathy” package in Ubuntu: New Bug description: When clicking on Empathy's icon in from the Indicator, the Preference window of Empathy opens up as well. I have right-clicked on Empathy's icon in Unity and selected Open Preferences before, and since then it keeps happening, although I'm not sure if it was that that triggered the bug. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: empathy 3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 21:43:33 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: empathy UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/986983/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986991] [NEW] Hostname left to ubuntu-0 in Bluetooth settings after install from live cd
Public bug reported: After installing from a live-cd session when given a hostname to the machine, the hostname is applied, but for some reason the live cd hostname ubuntu-0 is being shown in the blutooth settings instead of the user's chosen hostname. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 22:04:32 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu3 deja-dup22.0-0ubuntu2 gnome-bluetooth 3.2.2-0ubuntu5 indicator-datetime 0.3.94-0ubuntu2 ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug precise -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/986991 Title: Hostname left to ubuntu-0 in Bluetooth settings after install from live cd Status in “gnome-control-center” package in Ubuntu: New Bug description: After installing from a live-cd session when given a hostname to the machine, the hostname is applied, but for some reason the live cd hostname ubuntu-0 is being shown in the blutooth settings instead of the user's chosen hostname. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 22:04:32 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu3 deja-dup22.0-0ubuntu2 gnome-bluetooth 3.2.2-0ubuntu5 indicator-datetime 0.3.94-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/986991/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986991] Re: Hostname left to ubuntu-0 in Bluetooth settings after install from live cd
-- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-control-center in Ubuntu. https://bugs.launchpad.net/bugs/986991 Title: Hostname left to ubuntu-0 in Bluetooth settings after install from live cd Status in “gnome-control-center” package in Ubuntu: New Bug description: After installing from a live-cd session when given a hostname to the machine, the hostname is applied, but for some reason the live cd hostname ubuntu-0 is being shown in the blutooth settings instead of the user's chosen hostname. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: gnome-control-center 1:3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 22:04:32 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-control-center UpgradeStatus: No upgrade log present (probably fresh install) usr_lib_gnome-control-center: activity-log-manager-control-center 0.9.4-0ubuntu3 deja-dup22.0-0ubuntu2 gnome-bluetooth 3.2.2-0ubuntu5 indicator-datetime 0.3.94-0ubuntu2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/986991/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 986983] Re: Opening Empthay from the Indicator also opens the Preference window
Here is how to reproduce the bug: 1) Make sure Empathy is closed first 2) Start Empathy by clicking on the Messaging Indicator and -- Chat 3) Right-click on Empathy's icon in the Unity Launcher and select Open Preferences 4) Close Empathy (it will run in the background) 5) Now go to the Messaging Indicator and press Chat again 6) Empathy's contact list window will appear together with the Properties window This doesn't happen when you don't open the Preferences window by right-clicking on Open Preferences on Empathy's icon in the Unity Launcher -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to empathy in Ubuntu. https://bugs.launchpad.net/bugs/986983 Title: Opening Empthay from the Indicator also opens the Preference window Status in “empathy” package in Ubuntu: Incomplete Bug description: When clicking on Empathy's icon in from the Indicator, the Preference window of Empathy opens up as well. I have right-clicked on Empathy's icon in Unity and selected Open Preferences before, and since then it keeps happening, although I'm not sure if it was that that triggered the bug. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: empathy 3.4.1-0ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-23.36-generic 3.2.14 Uname: Linux 3.2.0-23-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 2.0.1-0ubuntu5 Architecture: amd64 Date: Sun Apr 22 21:43:33 2012 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Beta amd64 (20120417) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: empathy UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/986983/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 916078] Re: package libreoffice-core (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1
-- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/916078 Title: package libreoffice-core (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1 Status in “libreoffice” package in Ubuntu: New Bug description: During an upgrade, Libreoffice failed to install/upgrade due to missing dependencies. (Ubuntu 12.04) ProblemType: Package DistroRelease: Ubuntu 12.04 Package: libreoffice-core (not installed) ProcVersionSignature: Ubuntu 3.2.0-8.15-generic-pae 3.2.0 Uname: Linux 3.2.0-8-generic-pae i686 ApportVersion: 1.90-0ubuntu1 Architecture: i386 Date: Thu Jan 12 20:13:43 2012 DuplicateSignature: Unpacking replacement libreoffice-math ... Preparing to replace libreoffice-core 1:3.4.4-0ubuntu2 (using .../libreoffice-core_1%3a3.5.0~beta2-2ubuntu2_i386.deb) ... rmdir: failed to remove `usr/lib/libreoffice/basis3.4/program/': Directory not empty dpkg: error processing /var/cache/apt/archives/libreoffice-core_1%3a3.5.0~beta2-2ubuntu2_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 ErrorMessage: subprocess new pre-installation script returned error exit status 1 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha i386 (20111222) SourcePackage: libreoffice Title: package libreoffice-core (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/916078/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 916078] [NEW] package libreoffice-core (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1
Public bug reported: During an upgrade, Libreoffice failed to install/upgrade due to missing dependencies. (Ubuntu 12.04) ProblemType: Package DistroRelease: Ubuntu 12.04 Package: libreoffice-core (not installed) ProcVersionSignature: Ubuntu 3.2.0-8.15-generic-pae 3.2.0 Uname: Linux 3.2.0-8-generic-pae i686 ApportVersion: 1.90-0ubuntu1 Architecture: i386 Date: Thu Jan 12 20:13:43 2012 DuplicateSignature: Unpacking replacement libreoffice-math ... Preparing to replace libreoffice-core 1:3.4.4-0ubuntu2 (using .../libreoffice-core_1%3a3.5.0~beta2-2ubuntu2_i386.deb) ... rmdir: failed to remove `usr/lib/libreoffice/basis3.4/program/': Directory not empty dpkg: error processing /var/cache/apt/archives/libreoffice-core_1%3a3.5.0~beta2-2ubuntu2_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 ErrorMessage: subprocess new pre-installation script returned error exit status 1 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha i386 (20111222) SourcePackage: libreoffice Title: package libreoffice-core (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: libreoffice (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 precise -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to libreoffice in Ubuntu. https://bugs.launchpad.net/bugs/916078 Title: package libreoffice-core (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1 Status in “libreoffice” package in Ubuntu: New Bug description: During an upgrade, Libreoffice failed to install/upgrade due to missing dependencies. (Ubuntu 12.04) ProblemType: Package DistroRelease: Ubuntu 12.04 Package: libreoffice-core (not installed) ProcVersionSignature: Ubuntu 3.2.0-8.15-generic-pae 3.2.0 Uname: Linux 3.2.0-8-generic-pae i686 ApportVersion: 1.90-0ubuntu1 Architecture: i386 Date: Thu Jan 12 20:13:43 2012 DuplicateSignature: Unpacking replacement libreoffice-math ... Preparing to replace libreoffice-core 1:3.4.4-0ubuntu2 (using .../libreoffice-core_1%3a3.5.0~beta2-2ubuntu2_i386.deb) ... rmdir: failed to remove `usr/lib/libreoffice/basis3.4/program/': Directory not empty dpkg: error processing /var/cache/apt/archives/libreoffice-core_1%3a3.5.0~beta2-2ubuntu2_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 ErrorMessage: subprocess new pre-installation script returned error exit status 1 InstallationMedia: Ubuntu 12.04 LTS Precise Pangolin - Alpha i386 (20111222) SourcePackage: libreoffice Title: package libreoffice-core (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/916078/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 883784] [NEW] Right-click menu disappears
Public bug reported: When right-clicking on the top system bar the menu appears and disappears within 1 second instead of staying until you click somewhere else. In order to keep it shown I have to keep holding the right-click pressed ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: metacity 1:2.34.1-1ubuntu4 ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4 Uname: Linux 3.0.0-12-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 1.23-0ubuntu3 Architecture: amd64 CheckboxSubmission: 049a79ee2f4901b71e23ead76dcf81ca CheckboxSystem: d00f84de8a555815fa1c4660280da308 Date: Sun Oct 30 11:37:50 2011 InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) SourcePackage: metacity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: metacity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug oneiric running-unity -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to metacity in Ubuntu. https://bugs.launchpad.net/bugs/883784 Title: Right-click menu disappears Status in “metacity” package in Ubuntu: New Bug description: When right-clicking on the top system bar the menu appears and disappears within 1 second instead of staying until you click somewhere else. In order to keep it shown I have to keep holding the right-click pressed ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: metacity 1:2.34.1-1ubuntu4 ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4 Uname: Linux 3.0.0-12-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 1.23-0ubuntu3 Architecture: amd64 CheckboxSubmission: 049a79ee2f4901b71e23ead76dcf81ca CheckboxSystem: d00f84de8a555815fa1c4660280da308 Date: Sun Oct 30 11:37:50 2011 InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) SourcePackage: metacity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/metacity/+bug/883784/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 883784] Re: Right-click menu disappears
-- You received this bug notification because you are a member of Desktop Packages, which is subscribed to metacity in Ubuntu. https://bugs.launchpad.net/bugs/883784 Title: Right-click menu disappears Status in “metacity” package in Ubuntu: New Bug description: When right-clicking on the top system bar the menu appears and disappears within 1 second instead of staying until you click somewhere else. In order to keep it shown I have to keep holding the right-click pressed ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: metacity 1:2.34.1-1ubuntu4 ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4 Uname: Linux 3.0.0-12-generic x86_64 NonfreeKernelModules: nvidia wl ApportVersion: 1.23-0ubuntu3 Architecture: amd64 CheckboxSubmission: 049a79ee2f4901b71e23ead76dcf81ca CheckboxSystem: d00f84de8a555815fa1c4660280da308 Date: Sun Oct 30 11:37:50 2011 InstallationMedia: Ubuntu 11.10 Oneiric Ocelot - Release amd64 (20111012) SourcePackage: metacity UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/metacity/+bug/883784/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
