[Desktop-packages] [Bug 1901470] Re: [modeset][i915] Native resolution (EDID detailed mode) of 2560x1440 not listed, defaults to 1920x1080 instead
Follow post of a work around that automatically enables the resolution I want. I added a file named: 45custom_xrandr_settings in folder: /etc/X11/Xsession.d containing: xrandr --newmode "Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync xrandr --addmode HDMI-1-1 "Mode 0" This will cause X11 to use the 2560x1440 resolution after reboot. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: [modeset][i915] Native resolution (EDID detailed mode) of 2560x1440 not listed, defaults to 1920x1080 instead Status in linux package in Ubuntu: Confirmed Status in xorg-server package in Ubuntu: Confirmed Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052
[Desktop-packages] [Bug 1901470] Re: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI
output from: grep . /sys/class/drm/*/modes > modes.txt ** Attachment added: "modes.txt" https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1901470/+attachment/5428462/+files/modes.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline
[Desktop-packages] [Bug 1901470] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427753/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750
[Desktop-packages] [Bug 1901470] NvidiaBugReportLog.txt
apport information ** Attachment added: "NvidiaBugReportLog.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427749/+files/NvidiaBugReportLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720
[Desktop-packages] [Bug 1901470] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427750/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750
[Desktop-packages] [Bug 1901470] Xrandr.txt
apport information ** Attachment added: "Xrandr.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427761/+files/Xrandr.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync
[Desktop-packages] [Bug 1901470] XorgLogOld.txt
apport information ** Attachment added: "XorgLogOld.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427760/+files/XorgLogOld.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750
[Desktop-packages] [Bug 1901470] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427752/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720
[Desktop-packages] [Bug 1901470] nvidia-settings.txt
apport information ** Attachment added: "nvidia-settings.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427764/+files/nvidia-settings.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725
[Desktop-packages] [Bug 1901470] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427754/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730
[Desktop-packages] [Bug 1901470] acpidump.txt
apport information ** Attachment added: "acpidump.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427763/+files/acpidump.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync
[Desktop-packages] [Bug 1901470] MonitorsUser.xml.txt
apport information ** Attachment added: "MonitorsUser.xml.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427748/+files/MonitorsUser.xml.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725
[Desktop-packages] [Bug 1901470] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427757/+files/UdevDb.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync
[Desktop-packages] [Bug 1901470] Lsusb-v.txt
apport information ** Attachment added: "Lsusb-v.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427747/+files/Lsusb-v.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync
[Desktop-packages] [Bug 1901470] XorgLog.txt
apport information ** Attachment added: "XorgLog.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427759/+files/XorgLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync
[Desktop-packages] [Bug 1901470] xdpyinfo.txt
apport information ** Attachment added: "xdpyinfo.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427765/+files/xdpyinfo.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync
[Desktop-packages] [Bug 1901470] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427755/+files/ProcModules.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750
[Desktop-packages] [Bug 1901470] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427741/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750
[Desktop-packages] [Bug 1901470] Lsusb-t.txt
apport information ** Attachment added: "Lsusb-t.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427746/+files/Lsusb-t.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync
[Desktop-packages] [Bug 1901470] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427745/+files/Lsusb.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync +vsync
[Desktop-packages] [Bug 1901470] Lspci-vt.txt
apport information ** Attachment added: "Lspci-vt.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427744/+files/Lspci-vt.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync
[Desktop-packages] [Bug 1901470] Re: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI
apport information ** Tags added: apport-collected ubuntu ** Description changed: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync +vsync Modeline"Mode 4" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync Modeline"Mode 5" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync Modeline"Mode 6" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync Modeline"Mode 7" 25.200 640 656 752 800 480 490 492 525 -hsync
[Desktop-packages] [Bug 1901470] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427743/+files/Lspci.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync +vsync
[Desktop-packages] [Bug 1901470] DpkgLog.txt
apport information ** Attachment added: "DpkgLog.txt" https://bugs.launchpad.net/bugs/1901470/+attachment/5427742/+files/DpkgLog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xorg-server in Ubuntu. https://bugs.launchpad.net/bugs/1901470 Title: resolution not listed in xrandr from ASUS ROG PG278QR via HDMI Status in xorg-server package in Ubuntu: Incomplete Bug description: The PG278QR monitor supports 2560x1440. After installing Ubuntu 20.4, the max resolution presented in the Settings app is 1920x1080, and this resolution is the one that it uses. Switching between the Nvidia driver or the Intel driver (laptop has low-power intel gpu too) doesn't correct the problem. Digging in deeper, based on https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:__Wrong_resolutions.2C_refresh_rates.2C_or_monitor_specs Under Wrong resolutions/refresh rates/or monitor specs, step 3 is to use get-edid | parse-edid. After applying the mode that I wanted manually via xrandr --newmode and xrandr --addmode, I was able to select the max resolution of the monitor and works correctly, until reboot. I will add it to my xorg.conf next. Here is information I collected: output from xrandr after fresh boot: ~$ xrandr Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767 eDP-1-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.01*+ 60.0159.9759.9659.93 1680x1050 59.9559.88 1600x1024 60.17 1400x1050 59.98 1600x900 59.9959.9459.9559.82 1280x1024 60.02 1440x900 59.89 1400x900 59.9659.88 1280x960 60.00 1440x810 60.0059.97 1368x768 59.8859.85 1360x768 59.8059.96 1280x800 59.9959.9759.8159.91 1152x864 60.00 1280x720 60.0059.9959.8659.74 1024x768 60.0460.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.9559.9659.9059.82 960x600 59.9360.00 960x540 59.9659.9959.6359.82 800x600 60.0060.3256.25 840x525 60.0159.88 864x486 59.9259.57 800x512 60.17 700x525 59.98 800x450 59.9559.82 640x512 60.02 720x450 59.89 700x450 59.9659.88 640x480 60.0059.94 720x405 59.5158.99 684x384 59.8859.85 680x384 59.8059.96 640x400 59.8859.98 576x432 60.06 640x360 59.8659.8359.8459.32 512x384 60.00 512x288 60.0059.92 480x270 59.6359.82 400x300 60.3256.34 432x243 59.9259.57 320x240 60.05 360x202 59.5159.13 320x180 59.8459.32 HDMI-1-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 598mm x 336mm 1920x1080 60.00* 50.0059.94 1280x720 60.0050.0059.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x480 60.0059.94 640x480 60.0059.94 DP-1-1 disconnected (normal left inverted right x axis y axis) output from get-edid | parse-edid: ~$ sudo get-edid | parse-edid This is read-edid version 3.0.2. Prepare for some fun. Attempting to use i2c interface No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 5 No EDID on bus 6 No EDID on bus 7 No EDID on bus 9 No EDID on bus 10 3 potential busses found: 0 4 8 Will scan through until the first EDID is found. Pass a bus number as an option to this program to go only for that one. Bus 0 doesn't really have an EDID... 256-byte EDID successfully retrieved from i2c bus 4 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "ROG PG278QR" ModelName "ROG PG278QR" VendorName "AUS" # Monitor Manufactured week 47 of 2016 # EDID version 1.3 # Digital Display DisplaySize 600 340 Gamma 2.20 Option "DPMS" "false" Horizsync 30-140 VertRefresh 24-60 # Maximum pixel clock is 300MHz #Extension block found. Parsing... Modeline"Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 0" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync Modeline"Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline"Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync
[Desktop-packages] [Bug 1426542] [NEW] nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to build
Public bug reported: Happens every time I turn on the computer ProblemType: Package DistroRelease: Ubuntu 14.10 Package: nvidia-331 331.113-0ubuntu0.1 ProcVersionSignature: Ubuntu 3.16.0-31.41-generic 3.16.7-ckt5 Uname: Linux 3.16.0-31-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.7-0ubuntu8.2 Architecture: amd64 DKMSKernelVersion: 3.16.0-31-generic Date: Thu Feb 26 15:05:36 2015 InstallationDate: Installed on 2014-10-18 (132 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) PackageVersion: 331.113-0ubuntu0.1 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to build UpgradeStatus: Upgraded to utopic on 2014-10-24 (126 days ago) modified.conffile..etc.modprobe.d.nvidia.331.hybrid.conf: [deleted] ** Affects: nvidia-graphics-drivers-331 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package third-party-packages utopic -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-331 in Ubuntu. https://bugs.launchpad.net/bugs/1426542 Title: nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to build Status in nvidia-graphics-drivers-331 package in Ubuntu: New Bug description: Happens every time I turn on the computer ProblemType: Package DistroRelease: Ubuntu 14.10 Package: nvidia-331 331.113-0ubuntu0.1 ProcVersionSignature: Ubuntu 3.16.0-31.41-generic 3.16.7-ckt5 Uname: Linux 3.16.0-31-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.14.7-0ubuntu8.2 Architecture: amd64 DKMSKernelVersion: 3.16.0-31-generic Date: Thu Feb 26 15:05:36 2015 InstallationDate: Installed on 2014-10-18 (132 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) PackageVersion: 331.113-0ubuntu0.1 SourcePackage: nvidia-graphics-drivers-331 Title: nvidia-331 331.113-0ubuntu0.1: nvidia-331 kernel module failed to build UpgradeStatus: Upgraded to utopic on 2014-10-24 (126 days ago) modified.conffile..etc.modprobe.d.nvidia.331.hybrid.conf: [deleted] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1426542/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1026442] Re: Buddy pounce - send message window too short
Did this make it into precise-propsed? I don't see it yet. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pidgin in Ubuntu. https://bugs.launchpad.net/bugs/1026442 Title: Buddy pounce - send message window too short Status in Pidgin: Unknown Status in “pidgin” package in Ubuntu: Fix Released Status in “pidgin” source package in Precise: Confirmed Status in “pidgin” source package in Quantal: Confirmed Status in “pidgin” source package in Raring: Fix Released Bug description: The buddy pounce send message area are too short make it very hard to type a message. It does not rescale as well when you type in more than a line ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: pidgin 1:2.10.3-0ubuntu1.1 ProcVersionSignature: Ubuntu 3.2.0-26.41-generic 3.2.19 Uname: Linux 3.2.0-26-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.0.1-0ubuntu11 Architecture: amd64 Date: Thu Jul 19 06:40:44 2012 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1) ProcEnviron: TERM=xterm PATH=(custom, user) LANG=en_GB.UTF-8 SHELL=/bin/bash SourcePackage: pidgin UpgradeStatus: Upgraded to precise on 2012-05-02 (77 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/pidgin/+bug/1026442/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
