[Desktop-packages] [Bug 1688018] Re: DNS server from vpn connection is not being used after network-manager upgrade to 1.2.6
Just downgrade network-manager to 1.2.2-0ubuntu0.16.04.4 until the issue is resolved. Pretty simple. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1688018 Title: DNS server from vpn connection is not being used after network-manager upgrade to 1.2.6 Status in network-manager package in Ubuntu: Triaged Status in network-manager source package in Xenial: In Progress Status in network-manager source package in Yakkety: Triaged Bug description: This was initially opened as #1671606 then later duped to #1639776. Discussion in #1639776 indicate that we need new bug for this so I am opening one ... Please don't mark this as duplicate to #1639776 or other similar bug report. We already lost several months and we are again at beginning ... TL;DR; -> network-manager-1.2.2-0ubuntu0.16.04.4 use DNS defined by VPN (correct). network-manager-1.2.6-0ubuntu0.16.04.1 use DNS from DHCP instead of one defined by VPN (wrong). DNS resolver should query only DNS servers defined by VPN while connection is active. = Test steps / result: - upgraded network-manager to 1.2.6-0ubuntu0.16.04.1 (dnsmasq-base-2.75-1ubuntu0.16.04.2) - restated my laptop to ensure clean start - connected to VPN using openconnect / network-manager-openconnect-gnome Observed results -> DNS queries are forwarded only to DNS servers defined by LAN connection (this is wrong / connection not working at all) - "killall dnsmasq" - dnsmasq get automatically restarted by system Observed results -> most of the the queries are forwarded to DNS servers defined by VPN, but lot of queries get forwarded to DNS servers defined by LAN connection (this is still wrong / DNS leaks, attacker can hijack connection even if VPN is enabled) - I downgraded back network-manager to 1.2.2-0ubuntu0.16.04.4 (dnsmasq-base stay same) - restated my laptop to ensure clean test - connected to same VPN using openconnect Observed results -> DNS queries are forwarded only to DNS servers defined by VPN connection. There are no leaks to LAN DNS server (this is correct behavior). = Paul Smith requested additional details in #1639776. Here are: * If you're using IPv4 vs. IPv6 -> IPv4 only. I have IPv6 set to ignore on all network definition (lan / wifi /vpn) * If you have checked or unchecked the "Use this connection only for resources on its network" -> unchecked on all nw definition * If you have this checked, try unchecking it and see if that makes a difference -> no change if I toggle this option. Behavior is same. * When you say "DNS lookups" please be clear about whether the hostnames being looked up are public (e.g., www.google.com or whatever), on your local LAN, or in the network accessed via the VPN. Does it make a difference which one you choose? -> No difference. * Are you using fully-qualified hostnames, or relying on the DNS domain search path? Does it make a difference if you do it differently? -> I normaly use FQDN due to nature of HTTPs cert validation. I don't see difference when I try same using hostname + domain search. = I am using openconnect (cisco) and openvpn. Test result are by using openconnect but I saw same behaviour also while using openvpn. = Thanks Lukas To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1688018/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1688018] Re: DNS server from vpn connection is not being used after network-manager upgrade to 1.2.6
I experience the same issue on 16.04 but it ends up breaking DNS responses entirely because traffic is forced through the OpenVPN tunnel where the DNS resides and the local DNS is no longer accessible. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1688018 Title: DNS server from vpn connection is not being used after network-manager upgrade to 1.2.6 Status in network-manager package in Ubuntu: Triaged Status in network-manager source package in Xenial: In Progress Status in network-manager source package in Yakkety: Triaged Bug description: This was initially opened as #1671606 then later duped to #1639776. Discussion in #1639776 indicate that we need new bug for this so I am opening one ... Please don't mark this as duplicate to #1639776 or other similar bug report. We already lost several months and we are again at beginning ... TL;DR; -> network-manager-1.2.2-0ubuntu0.16.04.4 use DNS defined by VPN (correct). network-manager-1.2.6-0ubuntu0.16.04.1 use DNS from DHCP instead of one defined by VPN (wrong). DNS resolver should query only DNS servers defined by VPN while connection is active. = Test steps / result: - upgraded network-manager to 1.2.6-0ubuntu0.16.04.1 (dnsmasq-base-2.75-1ubuntu0.16.04.2) - restated my laptop to ensure clean start - connected to VPN using openconnect / network-manager-openconnect-gnome Observed results -> DNS queries are forwarded only to DNS servers defined by LAN connection (this is wrong / connection not working at all) - "killall dnsmasq" - dnsmasq get automatically restarted by system Observed results -> most of the the queries are forwarded to DNS servers defined by VPN, but lot of queries get forwarded to DNS servers defined by LAN connection (this is still wrong / DNS leaks, attacker can hijack connection even if VPN is enabled) - I downgraded back network-manager to 1.2.2-0ubuntu0.16.04.4 (dnsmasq-base stay same) - restated my laptop to ensure clean test - connected to same VPN using openconnect Observed results -> DNS queries are forwarded only to DNS servers defined by VPN connection. There are no leaks to LAN DNS server (this is correct behavior). = Paul Smith requested additional details in #1639776. Here are: * If you're using IPv4 vs. IPv6 -> IPv4 only. I have IPv6 set to ignore on all network definition (lan / wifi /vpn) * If you have checked or unchecked the "Use this connection only for resources on its network" -> unchecked on all nw definition * If you have this checked, try unchecking it and see if that makes a difference -> no change if I toggle this option. Behavior is same. * When you say "DNS lookups" please be clear about whether the hostnames being looked up are public (e.g., www.google.com or whatever), on your local LAN, or in the network accessed via the VPN. Does it make a difference which one you choose? -> No difference. * Are you using fully-qualified hostnames, or relying on the DNS domain search path? Does it make a difference if you do it differently? -> I normaly use FQDN due to nature of HTTPs cert validation. I don't see difference when I try same using hostname + domain search. = I am using openconnect (cisco) and openvpn. Test result are by using openconnect but I saw same behaviour also while using openvpn. = Thanks Lukas To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1688018/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1639776] Re: name resolution (dnsmasq) fails to send queries out after suspend/resume reconnects the interface
Ah yes. This is indeed referenced in the changelog on the system. Not sure what I should do next though. Open a new bugid or continue here? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1639776 Title: name resolution (dnsmasq) fails to send queries out after suspend/resume reconnects the interface Status in dnsmasq package in Ubuntu: Fix Released Status in network-manager package in Ubuntu: Invalid Status in dnsmasq source package in Xenial: Fix Released Status in network-manager source package in Xenial: Invalid Status in dnsmasq source package in Yakkety: Fix Released Status in network-manager source package in Yakkety: Invalid Status in dnsmasq package in Debian: Fix Released Bug description: [Impact] * suspend/resume (which involves disconnection of network devices) leads to dnsmasq failures. [Test Case] * suspend/resume on 16.04 or 16.10 when using dnsmasq, and see failures upon resume. [Regression Potential] * The fix was NMU'd in Debian in the version immediately after 16.10's. I believe the regression potential is very low as this is a clear bug-fix from upstream. --- Failure is caused by ENODEV return for all dns queries like: sendto(11, "\232\325\1\0\0\1\0\0\0\0\0\0\4mail\6google\3com\0\0\1\0"..., 33, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("62.241.198.245")}, 16) = -1 ENODEV (No such device) Problem is reported and fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1367772 http://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=2675f2061525bc954be14988d64384b74aa7bf8b I didn't yet test if applying that patch to ubuntu package works. I will try the patch in a few hours. ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: dnsmasq-base 2.76-4 ProcVersionSignature: Ubuntu 4.8.0-26.28-generic 4.8.0 Uname: Linux 4.8.0-26-generic x86_64 ApportVersion: 2.20.3-0ubuntu8 Architecture: amd64 CurrentDesktop: GNOME Date: Mon Nov 7 14:11:51 2016 InstallationDate: Installed on 2037-12-25 (-7718 days ago) InstallationMedia: Lubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: dnsmasq UpgradeStatus: Upgraded to yakkety on 2016-10-21 (16 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1639776/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1639776] Re: name resolution (dnsmasq) fails to send queries out after suspend/resume reconnects the interface
@Paul dnsmasq is 2.75-1ubuntu0.16.04.2 and I don't see anything newer within my repo. Has the pkg been updated for 16.04? pkg info: https://pastebin.com/aximAJxc Mint 18.1 (Ubuntu 16.04.2) x64 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1639776 Title: name resolution (dnsmasq) fails to send queries out after suspend/resume reconnects the interface Status in dnsmasq package in Ubuntu: Fix Released Status in network-manager package in Ubuntu: Invalid Status in dnsmasq source package in Xenial: Fix Released Status in network-manager source package in Xenial: Invalid Status in dnsmasq source package in Yakkety: Fix Released Status in network-manager source package in Yakkety: Invalid Status in dnsmasq package in Debian: Fix Released Bug description: [Impact] * suspend/resume (which involves disconnection of network devices) leads to dnsmasq failures. [Test Case] * suspend/resume on 16.04 or 16.10 when using dnsmasq, and see failures upon resume. [Regression Potential] * The fix was NMU'd in Debian in the version immediately after 16.10's. I believe the regression potential is very low as this is a clear bug-fix from upstream. --- Failure is caused by ENODEV return for all dns queries like: sendto(11, "\232\325\1\0\0\1\0\0\0\0\0\0\4mail\6google\3com\0\0\1\0"..., 33, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("62.241.198.245")}, 16) = -1 ENODEV (No such device) Problem is reported and fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1367772 http://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=2675f2061525bc954be14988d64384b74aa7bf8b I didn't yet test if applying that patch to ubuntu package works. I will try the patch in a few hours. ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: dnsmasq-base 2.76-4 ProcVersionSignature: Ubuntu 4.8.0-26.28-generic 4.8.0 Uname: Linux 4.8.0-26-generic x86_64 ApportVersion: 2.20.3-0ubuntu8 Architecture: amd64 CurrentDesktop: GNOME Date: Mon Nov 7 14:11:51 2016 InstallationDate: Installed on 2037-12-25 (-7718 days ago) InstallationMedia: Lubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: dnsmasq UpgradeStatus: Upgraded to yakkety on 2016-10-21 (16 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1639776/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1639776] Re: name resolution (dnsmasq) fails to send queries out after suspend/resume reconnects the interface
I also have the same issue as Lukas. Occurs: VPN Connects using redirect gateway VPN DNS is not used Local DNS unavailable No DNS queries work Expected: VPN Connects using redirect gateway VPN DNS is used Local DNS unavailable Temporary workaround: sudo pkill dnsmasq -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1639776 Title: name resolution (dnsmasq) fails to send queries out after suspend/resume reconnects the interface Status in dnsmasq package in Ubuntu: Fix Released Status in network-manager package in Ubuntu: Invalid Status in dnsmasq source package in Xenial: Fix Released Status in network-manager source package in Xenial: Invalid Status in dnsmasq source package in Yakkety: Fix Released Status in network-manager source package in Yakkety: Invalid Status in dnsmasq package in Debian: Fix Released Bug description: [Impact] * suspend/resume (which involves disconnection of network devices) leads to dnsmasq failures. [Test Case] * suspend/resume on 16.04 or 16.10 when using dnsmasq, and see failures upon resume. [Regression Potential] * The fix was NMU'd in Debian in the version immediately after 16.10's. I believe the regression potential is very low as this is a clear bug-fix from upstream. --- Failure is caused by ENODEV return for all dns queries like: sendto(11, "\232\325\1\0\0\1\0\0\0\0\0\0\4mail\6google\3com\0\0\1\0"..., 33, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("62.241.198.245")}, 16) = -1 ENODEV (No such device) Problem is reported and fixed: https://bugzilla.redhat.com/show_bug.cgi?id=1367772 http://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commitdiff;h=2675f2061525bc954be14988d64384b74aa7bf8b I didn't yet test if applying that patch to ubuntu package works. I will try the patch in a few hours. ProblemType: Bug DistroRelease: Ubuntu 16.10 Package: dnsmasq-base 2.76-4 ProcVersionSignature: Ubuntu 4.8.0-26.28-generic 4.8.0 Uname: Linux 4.8.0-26-generic x86_64 ApportVersion: 2.20.3-0ubuntu8 Architecture: amd64 CurrentDesktop: GNOME Date: Mon Nov 7 14:11:51 2016 InstallationDate: Installed on 2037-12-25 (-7718 days ago) InstallationMedia: Lubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: dnsmasq UpgradeStatus: Upgraded to yakkety on 2016-10-21 (16 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dnsmasq/+bug/1639776/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
Re: [Desktop-packages] [Bug 1568604] Re: Mouse cursor lost when unlocking with Intel graphics
Odd I did an update, no packages from other repos, just an update from the preexisting repos and the issue is resolved. I didn't see an update for the xorg drivers either. It's just working... weird.. On Jul 13, 2016 7:11 PM, "Mario Steele" <1568...@bugs.launchpad.net> wrote: > Attempts to use 2:2.99.917+git20160706-1ubuntu1 on my Asus S550CA, with > Intel Ivybridge Video card, did not resolve the issue with the mouse > dis-appearing. I've also attempted to remove the xserver-xorg-video- > intel package, and resort to using X.org's modesetting to see if that > would resolve the issue, and it does not. This is on Elementary OS 0.4 > (Loki). > > -- > You received this bug notification because you are subscribed to a > duplicate bug report (1596224). > https://bugs.launchpad.net/bugs/1568604 > > Title: > Mouse cursor lost when unlocking with Intel graphics > > To manage notifications about this bug go to: > https://bugs.launchpad.net/elementaryos/+bug/1568604/+subscriptions > -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1568604 Title: Mouse cursor lost when unlocking with Intel graphics Status in elementary OS: Confirmed Status in X.Org X server: Confirmed Status in xf86-video-intel: Fix Released Status in xserver-xorg-video-intel package in Ubuntu: Fix Released Status in xserver-xorg-video-intel source package in Xenial: Confirmed Bug description: [SRU for Ubuntu 16.04] Package (yakkety): xserver-xorg-video-intel 2:2.99.917+git20160706-1ubuntu1 Current (xenial): xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 [Impact] Mouse cursor is no longer visible after VT-switch for systems with Intel graphics. Switching VTs again may cause the cursor to become visible again. - Changing to vt1 then back to vt7 (ctrl+alt+f1 then ctrl+alt+f7) This is often observed in systems that lock the session and return to the greeter (including at least Xubuntu, Ubuntu Mate, and elementary OS). [Test Case] (Requires a lightdm-based screen locking solution) 1. Start a new session. 2. Lock your screen. 2a. You are redirected to the lightdm greeter. 3. Login/Unlock your session. 4. Cursor is no longer visible. [Debian Changelog (since 2:2.99.917+git20160325-1ubuntu1)] xserver-xorg-video-intel (2:2.99.917+git20160706-1ubuntu1) yakkety; urgency=medium * Merge from Debian. xserver-xorg-video-intel (2:2.99.917+git20160706-1) unstable; urgency=medium * New upstream snapshot. * fix-fd-leak-when-intel-scrn-create-fails.diff, sna-let-modesetting- handle-gen9+.diff: Dropped as the fallback to modesetting will be fully handled in the xserver. * .docs: Include a minimal xorg.conf. xserver-xorg-video-intel (2:2.99.917+git20160522-1ubuntu1) yakkety; urgency=medium * Merge from Debian. * install-dri3info.diff: Install dri3info with the driver, add libxcomposite-dev to build-depends. xserver-xorg-video-intel (2:2.99.917+git20160522-1) unstable; urgency=medium * New upstream snapshot. (Closes: #823116) * fix-fd-leak-when-intel-scrn-create-fails.diff: Fix a failure falling back on another driver when scrn create fails. [Regression Potential] Regression potential here seems minimal. However, as seen in the above Debian changelog, we have a new snapshot which includes several changes since March 25. === [Original Report] Cursor is visible at unlock screen either after returning from suspend or just locking. After unlocking screen cursor is invisible. Changing to vt1 then back to vt7 (ctrl+alt+f1 then ctrl+alt+f7) cursor returns no matter if you suspend or sleep, to swap or disk when you return from it, the mouse cursor is missing.you can still move the mouse and you can see (because it highlights the window) as you move it around. But the cursor is not displayed on the screen. i am using a lenovo W540 laptop. I downloaded the latest beta on april 8 2016. this is xubuntu using the xfce window manager. the cursor does return if i log off and log back in, but that actually defeats the purpose of going to sleep. --- ApportVersion: 2.20.1-0ubuntu1 Architecture: amd64 DistroRelease: Ubuntu 16.04 InstallationDate: Installed on 2016-04-08 (2 days ago) InstallationMedia: Xubuntu 16.04 LTS "Xenial Xerus" - Beta amd64 (20160323) NonfreeKernelModules: nvidia_uvm nvidia_modeset nvidia Package: light-locker 1.7.0-2ubuntu1 PackageArchitecture: amd64 ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 4.4.0-18.34-generic 4.4.6 Tags: xenial Uname: Linux 4.4.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True To manage notifications about this
Re: [Desktop-packages] [Bug 1568604] Re: Mouse cursor lost when unlocking with Intel graphics
I'd be willing to try the got feature and apply to locate the fix. Can you provide more information on how to accomplish that? Such as the URL to bisect from, a list of potential revisions to try, etc? I've used got to clone, branch, commit, and sync but that's it. I'd love to track this bug down and squish it. Get Outlook for Android On Sun, Jul 10, 2016 at 7:35 AM -0600, "Zisu Andrei" <1568...@bugs.launchpad.net> wrote: Hello everyone and future posters. In order to keep the noise to a minimum, if you wish to +1 this bug, you can use the top button which asks if this bug report is affecting you. The switching terminals workaround has been confirmed time and again so reiterating it adds absolutely no value. However, it has been observed that switching the version of the Intel graphics driver fixes the problem, so if you want to be truly helpful, use the git bisect feature and try and identify which commit fixes the issue. -- You received this bug notification because you are subscribed to a duplicate bug report (1596224). https://bugs.launchpad.net/bugs/1568604 Title: Mouse cursor lost when unlocking with Intel graphics To manage notifications about this bug go to: https://bugs.launchpad.net/elementaryos/+bug/1568604/+subscriptions -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu. https://bugs.launchpad.net/bugs/1568604 Title: Mouse cursor lost when unlocking with Intel graphics Status in elementary OS: Confirmed Status in X.Org X server: Confirmed Status in xf86-video-intel: Fix Released Status in xserver-xorg-video-intel package in Ubuntu: Confirmed Bug description: Cursor is visible at unlock screen either after returning from suspend or just locking. After unlocking screen cursor is invisible. Changing to vt1 then back to vt7 (ctrl+alt+f1 then ctrl+alt+f7) cursor returns no matter if you suspend or sleep, to swap or disk when you return from it, the mouse cursor is missing.you can still move the mouse and you can see (because it highlights the window) as you move it around. But the cursor is not displayed on the screen. i am using a lenovo W540 laptop. I downloaded the latest beta on april 8 2016. this is xubuntu using the xfce window manager. the cursor does return if i log off and log back in, but that actually defeats the purpose of going to sleep. --- ApportVersion: 2.20.1-0ubuntu1 Architecture: amd64 DistroRelease: Ubuntu 16.04 InstallationDate: Installed on 2016-04-08 (2 days ago) InstallationMedia: Xubuntu 16.04 LTS "Xenial Xerus" - Beta amd64 (20160323) NonfreeKernelModules: nvidia_uvm nvidia_modeset nvidia Package: light-locker 1.7.0-2ubuntu1 PackageArchitecture: amd64 ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 4.4.0-18.34-generic 4.4.6 Tags: xenial Uname: Linux 4.4.0-18-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True To manage notifications about this bug go to: https://bugs.launchpad.net/elementaryos/+bug/1568604/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
[Desktop-packages] [Bug 1252804] Re: Sound repeat unexpectedly
I think this should be reopened, I'm experiencing the same issue as listed above. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to pulseaudio in Ubuntu. https://bugs.launchpad.net/bugs/1252804 Title: Sound repeat unexpectedly Status in “pulseaudio” package in Ubuntu: Expired Bug description: Sometimes sounds are repeated in short parts as if they were a remix. Now I appearanced that watching a film with totem and trying to change sound level, but it also happens during skype calls. It might be indicated by the sound of the soundlevel-changing bubble. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: alsa-base 1.0.25+dfsg-0ubuntu4 ProcVersionSignature: Ubuntu 3.11.0-13.20-generic 3.11.6 Uname: Linux 3.11.0-13-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: mate 2190 F pulseaudio /dev/snd/pcmC1D0p: mate 2190 F...m pulseaudio /dev/snd/controlC0: mate 2190 F pulseaudio Date: Tue Nov 19 18:06:27 2013 InstallationDate: Installed on 2013-10-29 (20 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) MarkForUpload: True PackageArchitecture: all SourcePackage: alsa-driver UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/24/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: 6.20 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: Pumori dmi.board.vendor: AMD dmi.board.version: Base Board Version dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: OEM Chassis Manufacturer dmi.chassis.version: OEM Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvr6.20:bd10/24/2012:svnTOSHIBA:pnSATELLITEC855D-15V:pvrPSKD6E-005004HU:rvnAMD:rnPumori:rvrBaseBoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion: dmi.product.name: SATELLITE C855D-15V dmi.product.version: PSKD6E-005004HU dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1252804/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp