[Desktop-packages] [Bug 1112751] Re: DHCP over wireless stopped working
** Package changed: gnome-nettool (Ubuntu) => ubuntu -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-nettool in Ubuntu. https://bugs.launchpad.net/bugs/1112751 Title: DHCP over wireless stopped working Status in Ubuntu: New Bug description: Hi, I have a Dell Vostro 3700 notebook running Ubuntu 12.04.1 LTS and a Netgear FWG114P WLAN router which I bought 2005. Since the update on Sunday 27. January 2013 the NetworkManager fails to connect to my WLAN Router. The Indicator applet shows all available wireless networks, but the NetworkManager fails to establish the connection. Due to the fact that I see the available networks I think the WLAN driver itself works fine. It seems to be a DHCP problem, but I have no idead how to solve it. If I boot from an Ubuntu 12.04 USB stick which I created about 1 year ago WLAN works fine. Thus it's not a hardware problem. Please could you give me some hints how to solve this problem. Thanks & Best regards, Franz Hollerer # /sbin/ifconfig eth0 Link encap:Ethernet HWaddr f0:4d:a2:87:90:5a inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f24d:a2ff:fe87:905a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1 RX packets:2032 errors:0 dropped:0 overruns:0 frame:0 TX packets:1793 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1465900 (1.4 MB) TX bytes:249876 (249.8 KB) Interrupt:47 Base address:0x6000 eth1 Link encap:Ethernet HWaddr 5c:ac:4c:7e:c4:0f inet6 addr: fe80::5eac:4cff:fe7e:c40f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22 errors:2 dropped:0 overruns:0 frame:3780 TX packets:300 errors:141 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3602 (3.6 KB) TX bytes:66602 (66.6 KB) Interrupt:17 # iwconfig lono wireless extensions. eth1 IEEE 802.11abg ESSID:"Catopsis" Mode:Managed Frequency:2.432 GHz Access Point: 00:0F:B5:51:94:4A Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal level=-21 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:392 errors:0 dropped:0 overruns:0 frame:0 TX packets:392 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33528 (33.5 KB) TX bytes:33528 (33.5 KB) Excerpt from dmsg: [ 11.517377] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.20.155.1 (r326264) Excerpt from /var/log/syslog: avahi-daemon[945]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::5eac:4cff:fe7e:c40f. avahi-daemon[945]: New relevant interface eth1.IPv6 for mDNS. avahi-daemon[945]: Registering new address record for fe80::5eac:4cff:fe7e:c40f on eth1.*. NetworkManager[948]: Auto-activating connection 'Catopsis'. NetworkManager[948]: Activation (eth1) starting connection 'Catopsis' NetworkManager[948]: (eth1): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[948]: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[948]: Activation (eth1) Stage 1 of 5 (Device Prepare) started... NetworkManager[948]: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[948]: Activation (eth1) Stage 1 of 5 (Device Prepare) complete. NetworkManager[948]: Activation (eth1) Stage 2 of 5 (Device Configure) starting... NetworkManager[948]: (eth1): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[948]: Activation (eth1/wireless): access point 'Catopsis' has security, but secrets are required. NetworkManager[948]: (eth1): device state change: config -> need-auth (reason 'none') [50 60 0] NetworkManager[948]: Activation (eth1) Stage 2 of 5 (Device Configure) complete. NetworkManager[948]: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[948]: Activation (eth1) Stage 1 of 5 (Device Prepare) started... NetworkManager[948]: (eth1): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[948]: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[948]: Activation (eth1
[Desktop-packages] [Bug 1112751] Re: DHCP over wireless stopped working
This bug report was created from question https://answers.launchpad.net/ubuntu/+source/gnome- nettool/+question/220607 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gnome-nettool in Ubuntu. https://bugs.launchpad.net/bugs/1112751 Title: DHCP over wireless stopped working Status in “gnome-nettool” package in Ubuntu: New Bug description: Hi, I have a Dell Vostro 3700 notebook running Ubuntu 12.04.1 LTS and a Netgear FWG114P WLAN router which I bought 2005. Since the update on Sunday 27. January 2013 the NetworkManager fails to connect to my WLAN Router. The Indicator applet shows all available wireless networks, but the NetworkManager fails to establish the connection. Due to the fact that I see the available networks I think the WLAN driver itself works fine. It seems to be a DHCP problem, but I have no idead how to solve it. If I boot from an Ubuntu 12.04 USB stick which I created about 1 year ago WLAN works fine. Thus it's not a hardware problem. Please could you give me some hints how to solve this problem. Thanks & Best regards, Franz Hollerer # /sbin/ifconfig eth0 Link encap:Ethernet HWaddr f0:4d:a2:87:90:5a inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f24d:a2ff:fe87:905a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1 RX packets:2032 errors:0 dropped:0 overruns:0 frame:0 TX packets:1793 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1465900 (1.4 MB) TX bytes:249876 (249.8 KB) Interrupt:47 Base address:0x6000 eth1 Link encap:Ethernet HWaddr 5c:ac:4c:7e:c4:0f inet6 addr: fe80::5eac:4cff:fe7e:c40f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22 errors:2 dropped:0 overruns:0 frame:3780 TX packets:300 errors:141 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3602 (3.6 KB) TX bytes:66602 (66.6 KB) Interrupt:17 # iwconfig lono wireless extensions. eth1 IEEE 802.11abg ESSID:"Catopsis" Mode:Managed Frequency:2.432 GHz Access Point: 00:0F:B5:51:94:4A Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal level=-21 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:392 errors:0 dropped:0 overruns:0 frame:0 TX packets:392 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33528 (33.5 KB) TX bytes:33528 (33.5 KB) Excerpt from dmsg: [ 11.517377] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.20.155.1 (r326264) Excerpt from /var/log/syslog: avahi-daemon[945]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::5eac:4cff:fe7e:c40f. avahi-daemon[945]: New relevant interface eth1.IPv6 for mDNS. avahi-daemon[945]: Registering new address record for fe80::5eac:4cff:fe7e:c40f on eth1.*. NetworkManager[948]: Auto-activating connection 'Catopsis'. NetworkManager[948]: Activation (eth1) starting connection 'Catopsis' NetworkManager[948]: (eth1): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[948]: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[948]: Activation (eth1) Stage 1 of 5 (Device Prepare) started... NetworkManager[948]: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[948]: Activation (eth1) Stage 1 of 5 (Device Prepare) complete. NetworkManager[948]: Activation (eth1) Stage 2 of 5 (Device Configure) starting... NetworkManager[948]: (eth1): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[948]: Activation (eth1/wireless): access point 'Catopsis' has security, but secrets are required. NetworkManager[948]: (eth1): device state change: config -> need-auth (reason 'none') [50 60 0] NetworkManager[948]: Activation (eth1) Stage 2 of 5 (Device Configure) complete. NetworkManager[948]: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[948]: Activation (eth1) Stage 1 of 5 (Device Prepare) started... NetworkManager[948]: (eth1): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[948]: Activation
