[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Just thought I'd share my miser with the HP 1020 printer. I've suddenly started having the same issues with my HP 1020. Running MATE 19.04, with mainline 5.1.9 kernel, and HPLIP 3.19.5 I've removed and install HPLIP from scratch (multiple times), printer works fine, but after reboot I get HPLIP pop up "printer communication error" messages, and when doing dmesg, i get "device descriptor read/64, error -110" regardless of which USB port I plug into. Just today, I used the hp-firmware command as recommended in this thread, and often times that fixes the issue, until i reboot or turn printer off. I should mention that I was NOT having any printer issues while i was using 18.04.2 LTS. All these issues surfaced after I moved to 19.04 (fresh install, not an upgrade). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HPLIP: Invalid Status in hplip package in Ubuntu: Invalid Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:2
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Michael Baker, as this report is closed, it will help immensely if you filed a new report with Ubuntu via a terminal: ubuntu-bug cups Please feel free to subscribe me to it. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HPLIP: Invalid Status in hplip package in Ubuntu: Invalid Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Attached is the output of all the commands in the USB printer section of the link you sent above. When you look at the output of 'lsusb' in the attached you can see that the printer is not shown however nor is the indicator lamp lit on my USB Hub (yes, I've tried connecting this printer to each and every USB port on my system whether it's physically on the computer itself or on the 7 Port Hub I have). Once I turn the printer off then on again as shown below it's recognized with 'lsusb' but still will not print. chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 009: ID 1058:0830 Western Digital Technologies, Inc. Bus 001 Device 020: ID 03f0:2b17 Hewlett-Packard LaserJet 1020 Bus 001 Device 004: ID 0bc2:2120 Seagate RSS LLC Bus 001 Device 003: ID 050d:0237 Belkin Components F5U237 USB 2.0 7-Port Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1241:1166 Belkin MI-2150 Trust Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ** Attachment added: "Debugging output for USB printer problems from Ubuntu Wiki" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1428356/+attachment/4340676/+files/bug1428356printerts.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in cups package in Ubuntu: Incomplete Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
** Changed in: cups (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in cups package in Ubuntu: New Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 0
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
** Package changed: cups (Ubuntu) => hplip (Ubuntu) ** Also affects: hplip Importance: Undecided Status: New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 008 Device 001: ID 1d
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Probably the printer's firmware did not get loaded into the printer during the boot process of your computer. This is usually done by HPLIP, HP's driver package for their printers and multi-function devices. Another possibility is a USB communication problem, somewhere in HP's CUPS backend "hp". In both cases the bug would be in HPLIP, therefore I am moving this report to HPLIP. Can you please run the command sudo hp-firmware and see whether it loads the firmware into your printer and makes it working? To the HPLIP developers at HP, can you have a look at this? Thanks. ** Changed in: hplip Status: New => Incomplete ** Changed in: hplip (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detect
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
chris@localhost:~$ sudo hp-firmware [sudo] password for chris: HP Linux Imaging and Printing System (ver. 3.15.2) Firmware Download Utility ver. 2.4 Copyright (c) 2001-15 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Using device: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_1020?serial=JL1F0DC error: Unable to communicate with device or device is in an error state. Please check device setup and try again. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
chris pollock, to see if this already fixed in Ubuntu, could you please test http://cdimage.ubuntu.com/daily-live/current/ and advise to the results (i.e. just a one-liner confirming it's still an issue, or it's not). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Tested with Live DVD, no it still does not work. I even moved printer cable from USB Hub to USB port on computer and retested. Tried to save Syslog from Live DVD test but could not. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitec
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
I had to go to an appointment but when I got back I tried again with 14.04.2 LTS to print a test page from the CUPS web interface. Syslog shows: Mar 12 10:14:10 localhost hp[9034]: io/hpmud/musb.c 151: unable get_string_descriptor -7: Resource temporarily unavailable Mar 12 10:14:10 localhost hp[9034]: io/hpmud/musb.c 600: invalid product id string ret=-7 Mar 12 10:14:10 localhost hp[9034]: io/hpmud/musb.c 1143: unable to open hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 12 10:14:10 localhost hp[9034]: prnt/backend/hp.c 824: ERROR: open device failed stat=12: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 12 10:14:10 localhost foo2zjs-wrapper: gs -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=pbmraw -dCOLORSCREEN -dMaxBitmap=5 Mar 12 10:14:10 localhost foo2zjs-wrapper: foo2zjs -r1200x600 -g10200x6600 -p1 -m1 -n1 -d1 -s7 -z1 -u 192x96 -l 192x96 -L 0 -T3-P The printers USB cable is plugged directly into the computer instead of the HUB. The printer is seen as lsusb shows: Bus 002 Device 003: ID 03f0:2b17 Hewlett-Packard LaserJet 1020 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 005: ID 1058:0830 Western Digital Technologies, Inc. Bus 001 Device 004: ID 0bc2:2120 Seagate RSS LLC Bus 001 Device 003: ID 050d:0237 Belkin Components F5U237 USB 2.0 7-Port Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1241:1166 Belkin MI-2150 Trust Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub One thing I did not try when booted to 15.04 was to try and save the syslog to one of my external USB drives. If you wish I can give that a try. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Incomplete Status in hplip package in Ubuntu: Incomplete Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
** Changed in: hplip (Ubuntu) Status: Incomplete => Triaged ** Changed in: hplip Status: Incomplete => New ** Tags added: vivid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 008 Dev
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Is there anything else I can check since the HP Device Manager keeps showing 'Communication Error'? What steps now will be taken to fix this bug and is there any kind of a timetable for the fix? I ask this because 1) I'm fairly new to bug reporting and still unsure how the system works and 2) I have some important documents that I'll need to print in the very near future. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Devic
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
chris pollock, while waiting for a fix from the hplip maintainers, you can either try to install the older known version of the packages and pin the package to that version so it doesn't get further updated unless a fix lands, or test+reinstall with Precise. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
I have my printer working again, for how long I don't know but here is what I did. I had hplip 3.14.3-0ubuntu3.2 installed. I removed it and installed hplip 3.15.2 from source, did not work, completely removed it by 'make uninstall', installed 3.14.6 from source, same thing, completely uninstalled, same thing with 3.14.10 from source. I then reinstalled the hplip 3.14.3-0ubuntu3.2 package, rebooted the system and printer worked on the first try. I can't say whether it will continue to work but it is for now. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Christopher, though the printer is working I don't think hplip is being used: chris@localhost:~$ tail -f /var/log/syslog Mar 15 07:42:24 localhost kernel: [43827.071459] usblp 2-6:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 15 07:42:29 localhost hp[10793]: io/hpmud/model.c 108: unable to open /etc/hp/hplip.conf: No such file or directory Mar 15 07:42:29 localhost hp[10793]: io/hpmud/model.c 532: no HP_LaserJet_1020 attributes found in /data/models/models.dat Mar 15 07:42:29 localhost hp[10793]: io/hpmud/model.c 543: no HP_LaserJet_1020 attributes found in /data/models/unreleased/unreleased.dat Mar 15 07:42:30 localhost kernel: [43833.080441] usblp0: removed Mar 15 07:42:30 localhost kernel: [43833.082718] usblp 2-6:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 15 07:42:31 localhost foo2zjs-wrapper: foo2zjs-wrapper -z1 -P -L0 -r1200x600 -p1 -T3 -m1 -s7 -n1 Mar 15 07:42:32 localhost kernel: [43834.992044] usblp0: removed Mar 15 07:42:32 localhost foo2zjs-wrapper: gs -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=pbmraw -dCOLORSCREEN -dMaxBitmap=5 Mar 15 07:42:32 localhost foo2zjs-wrapper: foo2zjs -r1200x600 -g10200x6600 -p1 -m1 -n1 -d1 -s7 -z1 -u 192x96 -l 192x96 -L 0 -T3-P Mar 15 07:43:41 localhost kernel: [43904.763808] [drm:intel_crtc_cursor_set], cursor off Mar 15 07:43:48 localhost hp[10975]: io/hpmud/model.c 108: unable to open /etc/hp/hplip.conf: No such file or directory Mar 15 07:43:48 localhost hp[10975]: io/hpmud/model.c 532: no HP_LaserJet_1020 attributes found in /data/models/models.dat Mar 15 07:43:48 localhost hp[10975]: io/hpmud/model.c 543: no HP_LaserJet_1020 attributes found in /data/models/unreleased/unreleased.dat Mar 15 07:43:48 localhost foo2zjs-wrapper: foo2zjs-wrapper -z1 -P -L0 -r1200x600 -p1 -T3 -m1 -s7 -n1 Mar 15 07:43:49 localhost foo2zjs-wrapper: gs -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=pbmraw -dCOLORSCREEN -dMaxBitmap=5 Mar 15 07:43:49 localhost foo2zjs-wrapper: foo2zjs -r1200x600 -g10200x6600 -p1 -m1 -n1 -d1 -s7 -z1 -u 192x96 -l 192x96 -L 0 -T3-P I could be wrong though -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhos
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Chris, in your case the printer uses the hp CUPS backend (software to do communication between PC and printer) of HPLIP but it uses the foo2zjs printer driver (software to convert print job data into the format which the printer needs). -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root h
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Thanks Tim. This morning at 11:50 I had to do a reboot due to a lockup for an unknown reason. Since then I've seen probably thousands of lines like this in my syslog: Mar 16 11:52:14 localhost kernel: [ 46.590988] usblp0: removed Mar 16 11:52:14 localhost kernel: [ 46.595086] usblp 2-6:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This is in my latest hourly log snippet: Mar 16 18:59:55 localhost kernel: [25708.059774] usblp0: removed Mar 16 18:59:55 localhost kernel: [25708.061232] usblp 2-6:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 The dev possibly changed since I turned the printer off and on again to see if this issue would go away. I have no idea what's causing it or if it's connected to this issue. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-Lase
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Ok, ,I don't know now whether this is now another bug, additional info to this bug or what. Today at 2:56pm I had to reboot my system because it again locked up with a black screen and just a moving mouse cursor. I see this during the reboot in my syslog: Mar 17 14:56:37 localhost kernel: [ 30.333651] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 17 14:56:37 localhost kernel: [ 30.333670] usbcore: registered new interface driver usblp Mar 17 14:56:37 localhost cron[922]: (CRON) INFO (Running @reboot jobs) Mar 17 14:56:37 localhost kernel: [ 30.500853] usblp0: removed Mar 17 14:56:37 localhost kernel: [ 30.502154] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 17 14:56:43 localhost kernel: [ 36.345640] usblp0: removed Mar 17 14:56:43 localhost kernel: [ 36.347018] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 17 14:56:49 localhost kernel: [ 42.353448] usblp0: removed Mar 17 14:56:49 localhost kernel: [ 42.354934] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This goes on and on and if you'll notice it's every six seconds: Mar 17 14:59:13 localhost kernel: [ 186.542983] usblp0: removed Mar 17 14:59:13 localhost kernel: [ 186.544975] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 17 14:59:19 localhost kernel: [ 192.548783] usblp0: removed Mar 17 14:59:19 localhost kernel: [ 192.550181] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 17 14:59:25 localhost kernel: [ 198.561555] usblp0: removed Mar 17 14:59:25 localhost kernel: [ 198.563629] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 17 14:59:31 localhost kernel: [ 204.564720] usblp0: removed Mar 17 14:59:31 localhost kernel: [ 204.566108] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 17 14:59:37 localhost kernel: [ 210.572032] usblp0: removed Mar 17 14:59:37 localhost kernel: [ 210.574257] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 It apparently quit at 4:31 after I printed a test page to ensure the printer was still working: Mar 17 16:31:14 localhost kernel: [ 5707.702433] usblp0: removed Mar 17 16:31:14 localhost kernel: [ 5707.704157] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 17 16:31:18 localhost hp[17840]: io/hpmud/model.c 108: unable to open /etc/hp/hplip.conf: No such file or directory Mar 17 16:31:18 localhost hp[17840]: io/hpmud/model.c 532: no HP_LaserJet_1020 attributes found in /data/models/models.dat Mar 17 16:31:18 localhost hp[17840]: io/hpmud/model.c 543: no HP_LaserJet_1020 attributes found in /data/models/unreleased/unreleased.dat Mar 17 16:31:19 localhost foo2zjs-wrapper: foo2zjs-wrapper -z1 -P -L0 -r1200x600 -p1 -T3 -m1 -s7 -n1 Mar 17 16:31:20 localhost kernel: [ 5713.532782] usblp0: removed Mar 17 16:31:20 localhost foo2zjs-wrapper: gs -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=pbmraw -dCOLORSCREEN -dMaxBitmap=5 Mar 17 16:31:20 localhost foo2zjs-wrapper: foo2zjs -r1200x600 -g10200x6600 -p1 -m1 -n1 -d1 -s7 -z1 -u 192x96 -l 192x96 -L 0 -T3-P as I haven't noticed it in my syslog since then. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'.
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
So here we are again after having to reboot the system last night at 7:26pm this is showing up: Mar 19 19:49:34 localhost kernel: [ 380.280780] usblp0: removed Mar 19 19:49:34 localhost kernel: [ 380.281759] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 and on through the night: Mar 20 07:44:40 localhost kernel: [43286.401455] usblp0: removed Mar 20 07:44:40 localhost kernel: [43286.403001] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 I run a test page: Mar 20 07:44:43 localhost hp[30508]: io/hpmud/model.c 108: unable to open /etc/hp/hplip.conf: No such file or directory Mar 20 07:44:43 localhost hp[30508]: io/hpmud/model.c 532: no HP_LaserJet_1020 attributes found in /data/models/models.dat Mar 20 07:44:43 localhost hp[30508]: io/hpmud/model.c 543: no HP_LaserJet_1020 attributes found in /data/models/unreleased/unreleased.dat Mar 20 07:44:44 localhost foo2zjs-wrapper: foo2zjs-wrapper -z1 -P -L0 -r1200x600 -p1 -T3 -m1 -s7 -n1 Mar 20 07:44:45 localhost kernel: [43291.272254] usblp0: removed Mar 20 07:44:45 localhost foo2zjs-wrapper: gs -sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=pbmraw -dCOLORSCREEN -dMaxBitmap=5 Mar 20 07:44:45 localhost foo2zjs-wrapper: foo2zjs -r1200x600 -g10200x6600 -p1 -m1 -n1 -d1 -s7 -z1 -u 192x96 -l 192x96 -L 0 -T3-P Once I run a test page this stops. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/Lase
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Hello, It looks like HPLIP is not installed properly, as some hplip config files are not found as per syslog report. Please try installing latest Linux driver and reconfiguring the queues. Given below are the steps to do it. => Download and install the latest HPLIP release from http://hplipopensource.com/hplip-web/install/install/index.html (automatic installer) or http://hplipopensource.com/hplip- web/install/manual/index.html (manual installation, if automatic installer does not work) => Reconfigure print queue using below commands. => hp-setup -r (remove all print queues) => hp-setup => Try printing => In case the problem persists, send us the output of running the command "hp-doctor", /var/log/syslog and /var/log/cups/error_log -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 1
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
** Attachment added: "hp-doctor.txt" https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1428356/+attachment/4376270/+files/hp-doctor.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 008 Devi
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
** Attachment added: "hplipinstall.txt" https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1428356/+attachment/4376271/+files/hplipinstall.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 00
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
** Attachment added: "output of /var/log/cups/error_log, file is compressed as it's over 8mb" https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1428356/+attachment/4376275/+files/error_log.tar.bz2 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
** Attachment added: "Syslog entries during install attempt" https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1428356/+attachment/4376276/+files/hplip-syslog.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
File attachments for failed hplip install on 15 April 2015. ** Attachment added: "verification of .run file with gpg" https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1428356/+attachment/4376269/+files/hplip-verify.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
I'd actually forgotten about this bug report since the printer has been working flawlessly for awhile. I went through your suggested steps for the automatic install, which failed and the printer would not print. I did get it working again by just removing it using the CUPS Web Interface and reinstalling via the interface. I've attached all the pertinent files. The printer shows up in the interface as: Description:HP LaserJet 1020 Location: Local Printer Driver: HP LaserJet 1020 Foomatic/foo2zjs-z1 (recommended) (grayscale, 2-sided printing) Connection: usb://HP/LaserJet%201020?serial=JL1F0DC Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: h
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
I hope you are aware of that the HP LaserJet 1020 has no non-volatile memory to hold its firmware. Everytime when it is turned on a firmware file needs to be uploaded into the printer before the first job can be printed. The Upload is simply done by "printing" the file unfiltered from the computer where the printer is connected to. When you turn on the printer your hear its mechanics rotating for a self check. If the computer is correctly configured for automatic firmware upload you will hear the mechanics for a second time, telling that the firmware got uploaded. You will also hear the mechanics rotating one time when you manually upload the firmware (for example by running the hp-firmware command). If you send an arbitrary bunch of data instead of a firmware file, the mechanics will not rotate, so you can distinguish by the noise whether the printer got valid firmware. So turn on the printer while the computer is running, and check whether you get noise two times or when you have the printer already turned on and boot the computer, you need to get noise from the printer twice before you can print (once the reset from the USB, after that the firmware upload). The hp-doctor output suggests that the proprietary plugin from HP is installed but at least the files /usr/share/hplip/plugin.spec and /usr/share/hplip/data/firmware/hp_laserjet_1020.fw.gz are missing. The latter is the firmware file. Please run sudo hp-plugin to re-install the plugin and tell whether this helps. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 loc
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Hello Chris, As Till pointed out there are still errors with plugin config file and plugin files are missing. Please try the below steps once again. => Run the command "hp-uninstall" to cleanly uninstall HPLIP. Remove plug-ins too when prompted. => Install the latest (or already downloaded 3.15.2 run file) => Remove all the existing queues by running the command "hp-setup -r" => Re-configure the queue by running the command "hp-setup". This step will also prompt for installing the plugin. Follow the prompts to install the plugins. => Try printing to the queue named HP_LaserJet_1020 I see in the log files that there is also a filter called foo2zjs is used. Looks like this is the auto queue configured for the device. But lets see first if the problem is solved in a cleaned setup. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 h
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Thank you Suma, the removal and install went perfectly. The printer now works. I can't test it with a reboot at this time due to the fact that I'm running a custom kernel that is being tested to see if it corrects another bug report I've generated relating to video lockups. If/when I do reboot I'll add to this report whether the printer works or not. I suspect though that I'll have no more problems. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Glad to know that the problem is solved for you. Closing the bug based on above comment. ** Changed in: hplip Status: New => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Invalid Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 008 D
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
I need to get help again whether I need to re-open this bug I don't know. HPlip 3.15.6 was automatically installed as an update this evening. Since then I have not been able to print. I followed the directions in comment 60 again and when it comes to running hp-setup the printer can't be found again - Searching... (bus=usb, search=(None), desc=0) error: No devices found on bus: usb I'll try again in the morning to see what I can do. I'll uninstall 3.15.6 again and go from there. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Invalid Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching devic
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
chris pollock, as this appears to be a regression going from one hplip version to another in Wily (not Trusty as originally reported), please file a new report (not reopen this one) to track this regression via a terminal: ubuntu-bug hplip Please be sure to include all relevant information following https://wiki.ubuntu.com/DebuggingPrintingProblems . Also, please feel free to subscribe me to it. ** Changed in: hplip (Ubuntu) Status: Triaged => Invalid -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Invalid Status in hplip package in Ubuntu: Invalid Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
Chris, one additional step I had to take to get the firmware to download and that was besides unplugging and replugging the printer usb cable I also had to turn the printer off wait a second or two and then turn back on again. When I did that the printer was recognized in hp-setup and the firmware was downloaded successfully. Do you still want me to submit a new bug report stating that this additional step seems to be necessary? -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Invalid Status in hplip package in Ubuntu: Invalid Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.3279
[Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
chris pollock, please do include that information in the new report. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Invalid Status in hplip package in Ubuntu: Invalid Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: Queue ipp://localhost:631/printers/HP-LaserJet-1020 has matching device URI Mar 4 15:42:26 localhost kernel: [ 762.327990] usblp0: removed Mar 4 15:42:30 localhost colord: Device added: sysfs-Hewlett-Packard-HP_LaserJet_1020 chris@localhost:~$ lsusb Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 00
Re: [Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
On Wed, 2015-04-15 at 22:12 +, Till Kamppeter wrote: > I hope you are aware of that the HP LaserJet 1020 has no non-volatile > memory to hold its firmware. Everytime when it is turned on a firmware > file needs to be uploaded into the printer before the first job can be > printed. The Upload is simply done by "printing" the file unfiltered > from the computer where the printer is connected to. > > When you turn on the printer your hear its mechanics rotating for a self > check. If the computer is correctly configured for automatic firmware > upload you will hear the mechanics for a second time, telling that the > firmware got uploaded. You will also hear the mechanics rotating one > time when you manually upload the firmware (for example by running the > hp-firmware command). If you send an arbitrary bunch of data instead of > a firmware file, the mechanics will not rotate, so you can distinguish > by the noise whether the printer got valid firmware. So turn on the > printer while the computer is running, and check whether you get noise > two times or when you have the printer already turned on and boot the > computer, you need to get noise from the printer twice before you can > print (once the reset from the USB, after that the firmware upload). > > The hp-doctor output suggests that the proprietary plugin from HP is > installed but at least the files /usr/share/hplip/plugin.spec and > /usr/share/hplip/data/firmware/hp_laserjet_1020.fw.gz are missing. The > latter is the firmware file. > > Please run sudo hp-plugin to re-install the plugin and tell whether this > helps. > Output of sudo hp-plugin: chris@localhost:~$ sudo hp-plugin HP Linux Imaging and Printing System (ver. 3.15.2) Plugin Download and Install Utility ver. 2.1 Copyright (c) 2001-15 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. warning: /usr/share/hplip/plugin.spec file doesn't exists. Checking for network connection... Downloading plug-in from: error: /home/chris/.hplip/hplip-3.15.2-plugin.run file does not match its checksum. File may have been corrupted or altered Done. I do not have /home/chris/.hplip/hplip-3.15.2-plugin.run chris@localhost:~/.hplip$ ls -al total 44 drwxr-xr-x 3 chris chris 4096 Apr 15 17:31 . drwxr-xr-x 100 chris chris 12288 Apr 15 17:33 .. drwxr-xr-x 2 chris chris 4096 Mar 14 09:36 .gnupg -rw-r- 1 chris chris 13321 Apr 15 07:58 hp-doctor.log -rw-rw-rw- 1 chris chris 544 Apr 15 07:58 hplip.conf -rw-r- 1 chris chris 0 Apr 15 07:49 hp-systray.lock -rw-r- 1 chris chris 0 Mar 14 17:38 hp-toolbox.lock -rw-r- 1 chris chris71 Apr 15 07:55 hp-upgrade.log Chris -- Chris KeyID 0xE372A7DA98E6705C 31.11°N 97.89°W (Elev. 1092 ft) 17:31:36 up 7 days, 1:09, 2 users, load average: 0.09, 0.15, 0.14 Ubuntu 14.04.2 LTS, kernel 4.0.0-997-generic #201503310205 SMP Tue Mar 31 02:07:04 UTC 2015 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: New Status in hplip package in Ubuntu: Triaged Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: de
Re: [Desktop-packages] [Bug 1428356] Re: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot
On Fri, 2015-06-12 at 10:51 +, Christopher M. Penalver wrote: > chris pollock, as this appears to be a regression going from one hplip > version to another in Wily (not Trusty as originally reported), please file a > new report (not reopen this one) to track this regression via a terminal: > ubuntu-bug hplip > > Please be sure to include all relevant information following > https://wiki.ubuntu.com/DebuggingPrintingProblems . > > Also, please feel free to subscribe me to it. > > ** Changed in: hplip (Ubuntu) >Status: Triaged => Invalid > Christopher I filed a new bug on 06/26 and I think I subscribed you to it correctly. https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1469313 Chris -- Chris KeyID 0xE372A7DA98E6705C 31.11°N 97.89°W (Elev. 1092 ft) 08:51:02 up 4 days, 22:48, 1 user, load average: 0.23, 0.25, 0.28 Ubuntu 14.04.2 LTS, kernel 4.0.0-997-generic #201503310205 SMP Tue Mar 31 02:07:04 UTC 2015 -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/1428356 Title: 03f0:2b17 USB HP LaserJet 1020 printer will not print after boot Status in HP Linux Imaging and Printing: Invalid Status in hplip package in Ubuntu: Invalid Bug description: After a reboot due to cups related package update my HP1020 printer is not initialized. This is shown in my syslog: Mar 4 15:32:42 localhost kernel: [ 178.196280] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:42 localhost kernel: [ 178.198667] usblp0: removed Mar 4 15:32:53 localhost kernel: [ 189.196356] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:32:53 localhost kernel: [ 189.198743] usblp0: removed Mar 4 15:33:04 localhost kernel: [ 200.196869] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:33:04 localhost kernel: [ 200.199629] usblp0: removed Mar 4 15:33:15 localhost kernel: [ 211.200586] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 This just continues on for hundreds of entries until I unplug and replug the printer back in, and power cycle several times. It will then eventually print a test page via 'CUPS'. Some other information from my syslog: Mar 4 15:42:10 localhost kernel: [ 746.297929] usblp: can't set desired altsetting 0 on interface 0 Mar 4 15:42:10 localhost kernel: [ 746.488804] usb 1-3.5: USB disconnect, device number 5 Mar 4 15:42:14 localhost kernel: [ 750.528166] usb 1-3.5: new high-speed USB device number 7 using ehci-pci Mar 4 15:42:16 localhost udev-configure-printer: remove /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:16 localhost colord: device removed: sysfs-Hewlett-Packard-HP_LaserJet_1020 Mar 4 15:42:23 localhost kernel: [ 758.976137] usb 1-3.5: new high-speed USB device number 8 using ehci-pci Mar 4 15:42:23 localhost kernel: [ 759.088384] usb 1-3.5: New USB device found, idVendor=03f0, idProduct=2b17 Mar 4 15:42:23 localhost kernel: [ 759.088389] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 4 15:42:23 localhost kernel: [ 759.088392] usb 1-3.5: Product: HP LaserJet 1020 Mar 4 15:42:23 localhost kernel: [ 759.088394] usb 1-3.5: Manufacturer: Hewlett-Packard Mar 4 15:42:23 localhost kernel: [ 759.088396] usb 1-3.5: SerialNumber: JL1F0DC Mar 4 15:42:23 localhost kernel: [ 759.091958] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:23 localhost logger: loading HP Device 001 008 Mar 4 15:42:23 localhost udev-configure-printer: add /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: device devpath is /devices/pci:00/:00:1a.7/usb1/1-3/1-3.5 Mar 4 15:42:23 localhost udev-configure-printer: MFG:Hewlett-Packard MDL:HP LaserJet 1020 SERN:- serial:JL1F0DC Mar 4 15:42:24 localhost kernel: [ 760.148568] usblp0: removed Mar 4 15:42:24 localhost kernel: [ 760.159830] usblp 1-3.5:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 Mar 4 15:42:24 localhost udev-configure-printer: URI contains USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: usb://HP/LaserJet%201020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: SERN field matches USB serial number Mar 4 15:42:24 localhost udev-configure-printer: URI match: hp:/usb/HP_LaserJet_1020?serial=JL1F0DC Mar 4 15:42:24 localhost udev-configure-printer: URI of detected printer: usb://HP/LaserJet%201020?serial=JL1F0DC, normalized: laserjet 1020 serial jl1f0dc Mar 4 15:42:24 localhost udev-configure-printer: URI of print queue: usb://HP/LaserJet%201020?serial=JL1F0DC,