Re: [VOTE] publish ariatosca 0.1.0 (#2)

[Ran Ziv]

With 4 binding +1, the vote passes.
I'll send this to the incubator for the official incubator general list for
the official incubator vote now.

Thanks,
Ran

On Tue, Jul 4, 2017 at 7:51 PM, Avia Efrat  wrote:

> 1) Validated signature & checksums
> 2) Validated LICENSE, NOTICE, DISCLAIMER, "incubating" in archive name
> 3) Made a clean install using "pip install ."
> 4) Ran tests using "make test"
>
> +1
>
> On Mon, Jul 3, 2017 at 3:39 PM, Suneel Marthi  wrote:
>
> > +1 binding
> >
> > 1. Verified {sdist, bdist, source} * {sha, md5} hashes and sigs
> > 2. Built project from {source} with "pip install"
> > 3. Ran tests
> > 4. Verified -incubating in artifacts names.
> >
> >
> > On Mon, Jul 3, 2017 at 7:13 AM, John D. Ament 
> > wrote:
> >
> > > On Sun, Jul 2, 2017 at 9:18 AM Ran Ziv  wrote:
> > >
> > > > Okay. I didn't have anything to go by since as far as I can tell,
> other
> > > > projects don't put their PyPI package candidates on /dist/dev, but to
> > my
> > > > understanding, in the previous voting thread you've requested to have
> > it
> > > on
> > > > there as well.
> > > >
> > >
> > > Nope, the only package I care about is source.  Having the others is an
> > ace
> > > in the hole though, since it's covering the source, binary and sdist
> > > releases needed by pypi (FWIW, there was an effort to spin up an
> internal
> > > pypi service but it's stalled).  When we verify, we can verify the full
> > > package.  Now I know more about pypi dist's to be able to push back
> when
> > > other projects publish bad releases.
> > >
> > > Here's my +1 to release as is.
> > >
> > > I would recommend adding the instructions to the readme at some point,
> > this
> > > block:
> > >
> > > Instructions for installation etc. may be found in the README file
> inside
> > > the tarball.
> > > (Please note that the relevant installation instructions are for
> "source
> > > installation", not "install from PyPI")
> > >
> > >
> > > To use RAT to validate package conformance with ASF standards, please
> use
> > > the ".rat-excludes" file, for example:
> > > java -jar ../apache-rat-0.12/apache-rat-0.12.jar . -E .rat-excludes
> > >
> > >
> > > In any case, I modified the layout as you'd requested.
> > > >
> > > > Regarding md5 and sha files, note that on PyPI only pgp signatures
> may
> > be
> > > > used. I added them regardless.
> > > >
> > > >
> > > > Thanks,
> > > > Ran
> > > >
> > > >
> > > > On Sun, Jul 2, 2017 at 4:01 PM, John D. Ament  >
> > > > wrote:
> > > >
> > > > > Ran,
> > > > >
> > > > > I would recommend a different directory layout, to make it clear
> that
> > > > these
> > > > > are three different artifacts for the same release.  Most projects
> > > > create a
> > > > > version number below their project name, or just dump all of the
> > files
> > > in
> > > > > the root (makes it easier to remember to clean up afterwards).
> > > > >
> > > > > Starting from
> > > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > > > 0.1.0-incubating/
> > > > > create
> > > > > "source", "sdist" and "bdist" directories.
> > > > >
> > > > > Put the current contents of this URL in "source" and move the other
> > two
> > > > to
> > > > > the respective locations.  When sending out the vote, you only need
> > to
> > > > > include the root URL.  Or you can just dump everything directly
> into
> > > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/ .
> > > > >
> > > > > For the contents in sdist and bdist, please include the md5 and sha
> > > > files.
> > > > >
> > > > > John
> > > > >
> > > > > On Sun, Jul 2, 2017 at 8:40 AM Ran Ziv  wrote:
> > > > >
> > > > > > This is a vote to release Apache AriaTosca (Incubating) 0.1.0.
> > > > > > If the vote passes, another vote for approving the release will
> > take
> > > > > place
> > > > > > on the Apache Incubator's PMC.
> > > > > >
> > > > > >
> > > > > > I created a tarball candidate for the 0.1.0 release and placed it
> > in
> > > > > ARIA's
> > > > > > /dist/dev folder:
> > > > > > *
> > > > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > > > 0.1.0-incubating/
> > > > > > <
> > > > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > > > 0.1.0-incubating/
> > > > > > >*
> > > > > > The file is signed (.asc) and its MD5 / SHA512 checksums may be
> > found
> > > > in
> > > > > > that folder as well.
> > > > > >
> > > > > >
> > > > > > In addition, I've created packages for (Pythonic-)source & binary
> > > > > > distributions, which would be uploaded to PyPI if the release is
> > > > > approved.
> > > > > > These artifacts may be found here:
> > > > > > Source distribution:
> > > > > >
> > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > 0.1.0-sdist/
> > > > > > Binary distribution:
> > > > > >
> > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > 

Re: [VOTE] publish ariatosca 0.1.0 (#2)

[Avia Efrat]

1) Validated signature & checksums
2) Validated LICENSE, NOTICE, DISCLAIMER, "incubating" in archive name
3) Made a clean install using "pip install ."
4) Ran tests using "make test"

+1

On Mon, Jul 3, 2017 at 3:39 PM, Suneel Marthi  wrote:

> +1 binding
>
> 1. Verified {sdist, bdist, source} * {sha, md5} hashes and sigs
> 2. Built project from {source} with "pip install"
> 3. Ran tests
> 4. Verified -incubating in artifacts names.
>
>
> On Mon, Jul 3, 2017 at 7:13 AM, John D. Ament 
> wrote:
>
> > On Sun, Jul 2, 2017 at 9:18 AM Ran Ziv  wrote:
> >
> > > Okay. I didn't have anything to go by since as far as I can tell, other
> > > projects don't put their PyPI package candidates on /dist/dev, but to
> my
> > > understanding, in the previous voting thread you've requested to have
> it
> > on
> > > there as well.
> > >
> >
> > Nope, the only package I care about is source.  Having the others is an
> ace
> > in the hole though, since it's covering the source, binary and sdist
> > releases needed by pypi (FWIW, there was an effort to spin up an internal
> > pypi service but it's stalled).  When we verify, we can verify the full
> > package.  Now I know more about pypi dist's to be able to push back when
> > other projects publish bad releases.
> >
> > Here's my +1 to release as is.
> >
> > I would recommend adding the instructions to the readme at some point,
> this
> > block:
> >
> > Instructions for installation etc. may be found in the README file inside
> > the tarball.
> > (Please note that the relevant installation instructions are for "source
> > installation", not "install from PyPI")
> >
> >
> > To use RAT to validate package conformance with ASF standards, please use
> > the ".rat-excludes" file, for example:
> > java -jar ../apache-rat-0.12/apache-rat-0.12.jar . -E .rat-excludes
> >
> >
> > In any case, I modified the layout as you'd requested.
> > >
> > > Regarding md5 and sha files, note that on PyPI only pgp signatures may
> be
> > > used. I added them regardless.
> > >
> > >
> > > Thanks,
> > > Ran
> > >
> > >
> > > On Sun, Jul 2, 2017 at 4:01 PM, John D. Ament 
> > > wrote:
> > >
> > > > Ran,
> > > >
> > > > I would recommend a different directory layout, to make it clear that
> > > these
> > > > are three different artifacts for the same release.  Most projects
> > > create a
> > > > version number below their project name, or just dump all of the
> files
> > in
> > > > the root (makes it easier to remember to clean up afterwards).
> > > >
> > > > Starting from
> > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > > 0.1.0-incubating/
> > > > create
> > > > "source", "sdist" and "bdist" directories.
> > > >
> > > > Put the current contents of this URL in "source" and move the other
> two
> > > to
> > > > the respective locations.  When sending out the vote, you only need
> to
> > > > include the root URL.  Or you can just dump everything directly into
> > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/ .
> > > >
> > > > For the contents in sdist and bdist, please include the md5 and sha
> > > files.
> > > >
> > > > John
> > > >
> > > > On Sun, Jul 2, 2017 at 8:40 AM Ran Ziv  wrote:
> > > >
> > > > > This is a vote to release Apache AriaTosca (Incubating) 0.1.0.
> > > > > If the vote passes, another vote for approving the release will
> take
> > > > place
> > > > > on the Apache Incubator's PMC.
> > > > >
> > > > >
> > > > > I created a tarball candidate for the 0.1.0 release and placed it
> in
> > > > ARIA's
> > > > > /dist/dev folder:
> > > > > *
> > > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > > 0.1.0-incubating/
> > > > > <
> > > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > > 0.1.0-incubating/
> > > > > >*
> > > > > The file is signed (.asc) and its MD5 / SHA512 checksums may be
> found
> > > in
> > > > > that folder as well.
> > > > >
> > > > >
> > > > > In addition, I've created packages for (Pythonic-)source & binary
> > > > > distributions, which would be uploaded to PyPI if the release is
> > > > approved.
> > > > > These artifacts may be found here:
> > > > > Source distribution:
> > > > >
> > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> 0.1.0-sdist/
> > > > > Binary distribution:
> > > > >
> > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> 0.1.0-bdist/
> > > > >
> > > > >
> > > > >
> > > > > The list of issues Resolved for this release are simply all the
> > issues
> > > > that
> > > > > have been resolved thus far, seeing as this would be the first
> > release
> > > :)
> > > > > Those can be found here:
> > > > > https://issues.apache.org/jira/browse/ARIA-295?filter=-1;
> > > > > jql=project%3Dariatosca%20and%20status%20in%20(resolved%2C%
> 20closed)
> > > > >
> > > > >
> > > > > Instructions for installation etc. may be found in the README file
> > > 

Re: [VOTE] publish ariatosca 0.1.0 (#2)

[Suneel Marthi]

+1 binding

1. Verified {sdist, bdist, source} * {sha, md5} hashes and sigs
2. Built project from {source} with "pip install"
3. Ran tests
4. Verified -incubating in artifacts names.


On Mon, Jul 3, 2017 at 7:13 AM, John D. Ament  wrote:

> On Sun, Jul 2, 2017 at 9:18 AM Ran Ziv  wrote:
>
> > Okay. I didn't have anything to go by since as far as I can tell, other
> > projects don't put their PyPI package candidates on /dist/dev, but to my
> > understanding, in the previous voting thread you've requested to have it
> on
> > there as well.
> >
>
> Nope, the only package I care about is source.  Having the others is an ace
> in the hole though, since it's covering the source, binary and sdist
> releases needed by pypi (FWIW, there was an effort to spin up an internal
> pypi service but it's stalled).  When we verify, we can verify the full
> package.  Now I know more about pypi dist's to be able to push back when
> other projects publish bad releases.
>
> Here's my +1 to release as is.
>
> I would recommend adding the instructions to the readme at some point, this
> block:
>
> Instructions for installation etc. may be found in the README file inside
> the tarball.
> (Please note that the relevant installation instructions are for "source
> installation", not "install from PyPI")
>
>
> To use RAT to validate package conformance with ASF standards, please use
> the ".rat-excludes" file, for example:
> java -jar ../apache-rat-0.12/apache-rat-0.12.jar . -E .rat-excludes
>
>
> In any case, I modified the layout as you'd requested.
> >
> > Regarding md5 and sha files, note that on PyPI only pgp signatures may be
> > used. I added them regardless.
> >
> >
> > Thanks,
> > Ran
> >
> >
> > On Sun, Jul 2, 2017 at 4:01 PM, John D. Ament 
> > wrote:
> >
> > > Ran,
> > >
> > > I would recommend a different directory layout, to make it clear that
> > these
> > > are three different artifacts for the same release.  Most projects
> > create a
> > > version number below their project name, or just dump all of the files
> in
> > > the root (makes it easier to remember to clean up afterwards).
> > >
> > > Starting from
> > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > 0.1.0-incubating/
> > > create
> > > "source", "sdist" and "bdist" directories.
> > >
> > > Put the current contents of this URL in "source" and move the other two
> > to
> > > the respective locations.  When sending out the vote, you only need to
> > > include the root URL.  Or you can just dump everything directly into
> > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/ .
> > >
> > > For the contents in sdist and bdist, please include the md5 and sha
> > files.
> > >
> > > John
> > >
> > > On Sun, Jul 2, 2017 at 8:40 AM Ran Ziv  wrote:
> > >
> > > > This is a vote to release Apache AriaTosca (Incubating) 0.1.0.
> > > > If the vote passes, another vote for approving the release will take
> > > place
> > > > on the Apache Incubator's PMC.
> > > >
> > > >
> > > > I created a tarball candidate for the 0.1.0 release and placed it in
> > > ARIA's
> > > > /dist/dev folder:
> > > > *
> > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > 0.1.0-incubating/
> > > > <
> > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > 0.1.0-incubating/
> > > > >*
> > > > The file is signed (.asc) and its MD5 / SHA512 checksums may be found
> > in
> > > > that folder as well.
> > > >
> > > >
> > > > In addition, I've created packages for (Pythonic-)source & binary
> > > > distributions, which would be uploaded to PyPI if the release is
> > > approved.
> > > > These artifacts may be found here:
> > > > Source distribution:
> > > >
> > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-sdist/
> > > > Binary distribution:
> > > >
> > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-bdist/
> > > >
> > > >
> > > >
> > > > The list of issues Resolved for this release are simply all the
> issues
> > > that
> > > > have been resolved thus far, seeing as this would be the first
> release
> > :)
> > > > Those can be found here:
> > > > https://issues.apache.org/jira/browse/ARIA-295?filter=-1;
> > > > jql=project%3Dariatosca%20and%20status%20in%20(resolved%2C%20closed)
> > > >
> > > >
> > > > Instructions for installation etc. may be found in the README file
> > inside
> > > > the tarball.
> > > > (Please note that the relevant installation instructions are for
> > "source
> > > > installation", not "install from PyPI")
> > > >
> > > >
> > > > To use RAT to validate package conformance with ASF standards, please
> > use
> > > > the ".rat-excludes" file, for example:
> > > > java -jar ../apache-rat-0.12/apache-rat-0.12.jar . -E .rat-excludes
> > > >
> > > >
> > > >
> > > > The vote will last 72 hours.
> > > >
> > > > Please vote:
> > > >
> > > > [ ] +1: Good to go!
> > > > [ ] 0: I don't care
> > > > [ ] -1: 

Re: [VOTE] publish ariatosca 0.1.0 (#2)

[Ran Ziv]

Thanks John.
I took a note of adding the relevant instructions to the readme. I'll make
sure it's added soon.


On Mon, Jul 3, 2017 at 2:13 PM, John D. Ament  wrote:

> On Sun, Jul 2, 2017 at 9:18 AM Ran Ziv  wrote:
>
> > Okay. I didn't have anything to go by since as far as I can tell, other
> > projects don't put their PyPI package candidates on /dist/dev, but to my
> > understanding, in the previous voting thread you've requested to have it
> on
> > there as well.
> >
>
> Nope, the only package I care about is source.  Having the others is an ace
> in the hole though, since it's covering the source, binary and sdist
> releases needed by pypi (FWIW, there was an effort to spin up an internal
> pypi service but it's stalled).  When we verify, we can verify the full
> package.  Now I know more about pypi dist's to be able to push back when
> other projects publish bad releases.
>
> Here's my +1 to release as is.
>
> I would recommend adding the instructions to the readme at some point, this
> block:
>
> Instructions for installation etc. may be found in the README file inside
> the tarball.
> (Please note that the relevant installation instructions are for "source
> installation", not "install from PyPI")
>
>
> To use RAT to validate package conformance with ASF standards, please use
> the ".rat-excludes" file, for example:
> java -jar ../apache-rat-0.12/apache-rat-0.12.jar . -E .rat-excludes
>
>
> In any case, I modified the layout as you'd requested.
> >
> > Regarding md5 and sha files, note that on PyPI only pgp signatures may be
> > used. I added them regardless.
> >
> >
> > Thanks,
> > Ran
> >
> >
> > On Sun, Jul 2, 2017 at 4:01 PM, John D. Ament 
> > wrote:
> >
> > > Ran,
> > >
> > > I would recommend a different directory layout, to make it clear that
> > these
> > > are three different artifacts for the same release.  Most projects
> > create a
> > > version number below their project name, or just dump all of the files
> in
> > > the root (makes it easier to remember to clean up afterwards).
> > >
> > > Starting from
> > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > 0.1.0-incubating/
> > > create
> > > "source", "sdist" and "bdist" directories.
> > >
> > > Put the current contents of this URL in "source" and move the other two
> > to
> > > the respective locations.  When sending out the vote, you only need to
> > > include the root URL.  Or you can just dump everything directly into
> > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/ .
> > >
> > > For the contents in sdist and bdist, please include the md5 and sha
> > files.
> > >
> > > John
> > >
> > > On Sun, Jul 2, 2017 at 8:40 AM Ran Ziv  wrote:
> > >
> > > > This is a vote to release Apache AriaTosca (Incubating) 0.1.0.
> > > > If the vote passes, another vote for approving the release will take
> > > place
> > > > on the Apache Incubator's PMC.
> > > >
> > > >
> > > > I created a tarball candidate for the 0.1.0 release and placed it in
> > > ARIA's
> > > > /dist/dev folder:
> > > > *
> > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > 0.1.0-incubating/
> > > > <
> > > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > > 0.1.0-incubating/
> > > > >*
> > > > The file is signed (.asc) and its MD5 / SHA512 checksums may be found
> > in
> > > > that folder as well.
> > > >
> > > >
> > > > In addition, I've created packages for (Pythonic-)source & binary
> > > > distributions, which would be uploaded to PyPI if the release is
> > > approved.
> > > > These artifacts may be found here:
> > > > Source distribution:
> > > >
> > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-sdist/
> > > > Binary distribution:
> > > >
> > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-bdist/
> > > >
> > > >
> > > >
> > > > The list of issues Resolved for this release are simply all the
> issues
> > > that
> > > > have been resolved thus far, seeing as this would be the first
> release
> > :)
> > > > Those can be found here:
> > > > https://issues.apache.org/jira/browse/ARIA-295?filter=-1;
> > > > jql=project%3Dariatosca%20and%20status%20in%20(resolved%2C%20closed)
> > > >
> > > >
> > > > Instructions for installation etc. may be found in the README file
> > inside
> > > > the tarball.
> > > > (Please note that the relevant installation instructions are for
> > "source
> > > > installation", not "install from PyPI")
> > > >
> > > >
> > > > To use RAT to validate package conformance with ASF standards, please
> > use
> > > > the ".rat-excludes" file, for example:
> > > > java -jar ../apache-rat-0.12/apache-rat-0.12.jar . -E .rat-excludes
> > > >
> > > >
> > > >
> > > > The vote will last 72 hours.
> > > >
> > > > Please vote:
> > > >
> > > > [ ] +1: Good to go!
> > > > [ ] 0: I don't care
> > > > [ ] -1: Don't release this because...
> > > >
> > > >
> > > > Thanks,
> > > > Ran

Re: [VOTE] publish ariatosca 0.1.0 (#2)

[John D. Ament]

On Sun, Jul 2, 2017 at 9:18 AM Ran Ziv  wrote:

> Okay. I didn't have anything to go by since as far as I can tell, other
> projects don't put their PyPI package candidates on /dist/dev, but to my
> understanding, in the previous voting thread you've requested to have it on
> there as well.
>

Nope, the only package I care about is source.  Having the others is an ace
in the hole though, since it's covering the source, binary and sdist
releases needed by pypi (FWIW, there was an effort to spin up an internal
pypi service but it's stalled).  When we verify, we can verify the full
package.  Now I know more about pypi dist's to be able to push back when
other projects publish bad releases.

Here's my +1 to release as is.

I would recommend adding the instructions to the readme at some point, this
block:

Instructions for installation etc. may be found in the README file inside
the tarball.
(Please note that the relevant installation instructions are for "source
installation", not "install from PyPI")


To use RAT to validate package conformance with ASF standards, please use
the ".rat-excludes" file, for example:
java -jar ../apache-rat-0.12/apache-rat-0.12.jar . -E .rat-excludes


In any case, I modified the layout as you'd requested.
>
> Regarding md5 and sha files, note that on PyPI only pgp signatures may be
> used. I added them regardless.
>
>
> Thanks,
> Ran
>
>
> On Sun, Jul 2, 2017 at 4:01 PM, John D. Ament 
> wrote:
>
> > Ran,
> >
> > I would recommend a different directory layout, to make it clear that
> these
> > are three different artifacts for the same release.  Most projects
> create a
> > version number below their project name, or just dump all of the files in
> > the root (makes it easier to remember to clean up afterwards).
> >
> > Starting from
> > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > 0.1.0-incubating/
> > create
> > "source", "sdist" and "bdist" directories.
> >
> > Put the current contents of this URL in "source" and move the other two
> to
> > the respective locations.  When sending out the vote, you only need to
> > include the root URL.  Or you can just dump everything directly into
> > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/ .
> >
> > For the contents in sdist and bdist, please include the md5 and sha
> files.
> >
> > John
> >
> > On Sun, Jul 2, 2017 at 8:40 AM Ran Ziv  wrote:
> >
> > > This is a vote to release Apache AriaTosca (Incubating) 0.1.0.
> > > If the vote passes, another vote for approving the release will take
> > place
> > > on the Apache Incubator's PMC.
> > >
> > >
> > > I created a tarball candidate for the 0.1.0 release and placed it in
> > ARIA's
> > > /dist/dev folder:
> > > *
> > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > 0.1.0-incubating/
> > > <
> > > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> > 0.1.0-incubating/
> > > >*
> > > The file is signed (.asc) and its MD5 / SHA512 checksums may be found
> in
> > > that folder as well.
> > >
> > >
> > > In addition, I've created packages for (Pythonic-)source & binary
> > > distributions, which would be uploaded to PyPI if the release is
> > approved.
> > > These artifacts may be found here:
> > > Source distribution:
> > >
> https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-sdist/
> > > Binary distribution:
> > >
> https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-bdist/
> > >
> > >
> > >
> > > The list of issues Resolved for this release are simply all the issues
> > that
> > > have been resolved thus far, seeing as this would be the first release
> :)
> > > Those can be found here:
> > > https://issues.apache.org/jira/browse/ARIA-295?filter=-1;
> > > jql=project%3Dariatosca%20and%20status%20in%20(resolved%2C%20closed)
> > >
> > >
> > > Instructions for installation etc. may be found in the README file
> inside
> > > the tarball.
> > > (Please note that the relevant installation instructions are for
> "source
> > > installation", not "install from PyPI")
> > >
> > >
> > > To use RAT to validate package conformance with ASF standards, please
> use
> > > the ".rat-excludes" file, for example:
> > > java -jar ../apache-rat-0.12/apache-rat-0.12.jar . -E .rat-excludes
> > >
> > >
> > >
> > > The vote will last 72 hours.
> > >
> > > Please vote:
> > >
> > > [ ] +1: Good to go!
> > > [ ] 0: I don't care
> > > [ ] -1: Don't release this because...
> > >
> > >
> > > Thanks,
> > > Ran
> > >
> >
>

Re: [VOTE] publish ariatosca 0.1.0 (#2)

[Ran Ziv]

Okay. I didn't have anything to go by since as far as I can tell, other
projects don't put their PyPI package candidates on /dist/dev, but to my
understanding, in the previous voting thread you've requested to have it on
there as well.
In any case, I modified the layout as you'd requested.

Regarding md5 and sha files, note that on PyPI only pgp signatures may be
used. I added them regardless.


Thanks,
Ran


On Sun, Jul 2, 2017 at 4:01 PM, John D. Ament  wrote:

> Ran,
>
> I would recommend a different directory layout, to make it clear that these
> are three different artifacts for the same release.  Most projects create a
> version number below their project name, or just dump all of the files in
> the root (makes it easier to remember to clean up afterwards).
>
> Starting from
> https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> 0.1.0-incubating/
> create
> "source", "sdist" and "bdist" directories.
>
> Put the current contents of this URL in "source" and move the other two to
> the respective locations.  When sending out the vote, you only need to
> include the root URL.  Or you can just dump everything directly into
> https://dist.apache.org/repos/dist/dev/incubator/ariatosca/ .
>
> For the contents in sdist and bdist, please include the md5 and sha files.
>
> John
>
> On Sun, Jul 2, 2017 at 8:40 AM Ran Ziv  wrote:
>
> > This is a vote to release Apache AriaTosca (Incubating) 0.1.0.
> > If the vote passes, another vote for approving the release will take
> place
> > on the Apache Incubator's PMC.
> >
> >
> > I created a tarball candidate for the 0.1.0 release and placed it in
> ARIA's
> > /dist/dev folder:
> > *
> > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> 0.1.0-incubating/
> > <
> > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/
> 0.1.0-incubating/
> > >*
> > The file is signed (.asc) and its MD5 / SHA512 checksums may be found in
> > that folder as well.
> >
> >
> > In addition, I've created packages for (Pythonic-)source & binary
> > distributions, which would be uploaded to PyPI if the release is
> approved.
> > These artifacts may be found here:
> > Source distribution:
> > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-sdist/
> > Binary distribution:
> > https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-bdist/
> >
> >
> >
> > The list of issues Resolved for this release are simply all the issues
> that
> > have been resolved thus far, seeing as this would be the first release :)
> > Those can be found here:
> > https://issues.apache.org/jira/browse/ARIA-295?filter=-1;
> > jql=project%3Dariatosca%20and%20status%20in%20(resolved%2C%20closed)
> >
> >
> > Instructions for installation etc. may be found in the README file inside
> > the tarball.
> > (Please note that the relevant installation instructions are for "source
> > installation", not "install from PyPI")
> >
> >
> > To use RAT to validate package conformance with ASF standards, please use
> > the ".rat-excludes" file, for example:
> > java -jar ../apache-rat-0.12/apache-rat-0.12.jar . -E .rat-excludes
> >
> >
> >
> > The vote will last 72 hours.
> >
> > Please vote:
> >
> > [ ] +1: Good to go!
> > [ ] 0: I don't care
> > [ ] -1: Don't release this because...
> >
> >
> > Thanks,
> > Ran
> >
>

Re: [VOTE] publish ariatosca 0.1.0 (#2)

[John D. Ament]

Ran,

I would recommend a different directory layout, to make it clear that these
are three different artifacts for the same release.  Most projects create a
version number below their project name, or just dump all of the files in
the root (makes it easier to remember to clean up afterwards).

Starting from
https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-incubating/
create
"source", "sdist" and "bdist" directories.

Put the current contents of this URL in "source" and move the other two to
the respective locations.  When sending out the vote, you only need to
include the root URL.  Or you can just dump everything directly into
https://dist.apache.org/repos/dist/dev/incubator/ariatosca/ .

For the contents in sdist and bdist, please include the md5 and sha files.

John

On Sun, Jul 2, 2017 at 8:40 AM Ran Ziv  wrote:

> This is a vote to release Apache AriaTosca (Incubating) 0.1.0.
> If the vote passes, another vote for approving the release will take place
> on the Apache Incubator's PMC.
>
>
> I created a tarball candidate for the 0.1.0 release and placed it in ARIA's
> /dist/dev folder:
> *
> https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-incubating/
> <
> https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-incubating/
> >*
> The file is signed (.asc) and its MD5 / SHA512 checksums may be found in
> that folder as well.
>
>
> In addition, I've created packages for (Pythonic-)source & binary
> distributions, which would be uploaded to PyPI if the release is approved.
> These artifacts may be found here:
> Source distribution:
> https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-sdist/
> Binary distribution:
> https://dist.apache.org/repos/dist/dev/incubator/ariatosca/0.1.0-bdist/
>
>
>
> The list of issues Resolved for this release are simply all the issues that
> have been resolved thus far, seeing as this would be the first release :)
> Those can be found here:
> https://issues.apache.org/jira/browse/ARIA-295?filter=-1;
> jql=project%3Dariatosca%20and%20status%20in%20(resolved%2C%20closed)
>
>
> Instructions for installation etc. may be found in the README file inside
> the tarball.
> (Please note that the relevant installation instructions are for "source
> installation", not "install from PyPI")
>
>
> To use RAT to validate package conformance with ASF standards, please use
> the ".rat-excludes" file, for example:
> java -jar ../apache-rat-0.12/apache-rat-0.12.jar . -E .rat-excludes
>
>
>
> The vote will last 72 hours.
>
> Please vote:
>
> [ ] +1: Good to go!
> [ ] 0: I don't care
> [ ] -1: Don't release this because...
>
>
> Thanks,
> Ran
>