[dpdk-dev] [PATCH 00/26] update ixgbe base driver
Short summary: *update copyright and readme *fix code comment, double from *fix typo error in code comment *check return value after calling *allow tunneled UDP and TCP frames to reach their destination *erase ixgbe_get_hi_status *provide unlocked I2C methods *reduce I2C retry count on X550 devices *issue firmware command when coming up *add logic to reset CS4227 when needed *restore ESDP settings after MAC reset *disable FEC to save power *set lan_id for non-PCIe devices *add SFP+ dual-speed support *add SW based LPLU support *fix flow control for KR backplane *new simplified x550em init flow *move I2C MUX function from ixgbe_x540.c to ixgbe_x550.c *change return value for ixgbe_setup_internal_phy_t_x550em *ixgbe_setup_internal_phy_x550em function clean-up *add x550em Auto neg Flow Control support *add x550em PHY interrupt and forced 1G/10G support *add link check support for x550em PHY *set lan_id before first I2C access *added x550em PHY reset function *block EEE setup on the interfaces which don't support EEE Wenzhuo Lu (26): ixgbe/base: update copyright and readme ixgbe/base: fix code comment, double from ixgbe/base: fix typo error in code comment ixgbe/base: check return value after calling ixgbe/base: allow tunneled UDP and TCP frames to reach their destination ixgbe/base: erase ixgbe_get_hi_status ixgbe/base: provide unlocked I2C methods ixgbe/base: reduce I2C retry count on X550 devices ixgbe/base: issue firmware command when coming up ixgbe/base: add logic to reset CS4227 when needed ixgbe/base: restore ESDP settings after MAC reset ixgbe/base: disable FEC(Forward Error Correction) to save power ixgbe/base: set lan_id for non-PCIe devices ixgbe/base: add SFP+ dual-speed support ixgbe/base: add SW based LPLU support ixgbe/base: fix flow control for KR backplane ixgbe/base: new simplified x550em init flow ixgbe/base: move I2C MUX function from ixgbe_x540.c to ixgbe_x550.c ixgbe/base: change return value for ixgbe_setup_internal_phy_t_x550em ixgbe/base: ixgbe_setup_internal_phy_x550em function clean-up ixgbe/base: add x550em Auto neg Flow Control support ixgbe/base: add x550em PHY interrupt and forced 1G/10G support ixgbe/base: add link check support for x550em PHY ixgbe/base: set lan_id before first I2C access ixgbe/base: added x550em PHY reset function ixgbe/base: block EEE(Energy Efficient Ethernet) setup on the interfaces that don't support EEE drivers/net/ixgbe/base/README|4 +- drivers/net/ixgbe/base/ixgbe_82598.c |7 +- drivers/net/ixgbe/base/ixgbe_82598.h |2 +- drivers/net/ixgbe/base/ixgbe_82599.c | 191 +- drivers/net/ixgbe/base/ixgbe_82599.h |7 +- drivers/net/ixgbe/base/ixgbe_api.c | 141 +++- drivers/net/ixgbe/base/ixgbe_api.h | 16 +- drivers/net/ixgbe/base/ixgbe_common.c| 270 +++- drivers/net/ixgbe/base/ixgbe_common.h|9 +- drivers/net/ixgbe/base/ixgbe_dcb.c |2 +- drivers/net/ixgbe/base/ixgbe_dcb.h |2 +- drivers/net/ixgbe/base/ixgbe_dcb_82598.c |2 +- drivers/net/ixgbe/base/ixgbe_dcb_82598.h |2 +- drivers/net/ixgbe/base/ixgbe_dcb_82599.c |2 +- drivers/net/ixgbe/base/ixgbe_dcb_82599.h |2 +- drivers/net/ixgbe/base/ixgbe_mbx.c |2 +- drivers/net/ixgbe/base/ixgbe_mbx.h |2 +- drivers/net/ixgbe/base/ixgbe_osdep.h |2 +- drivers/net/ixgbe/base/ixgbe_phy.c | 215 ++- drivers/net/ixgbe/base/ixgbe_phy.h | 23 +- drivers/net/ixgbe/base/ixgbe_type.h | 70 +- drivers/net/ixgbe/base/ixgbe_vf.c|3 +- drivers/net/ixgbe/base/ixgbe_vf.h|2 +- drivers/net/ixgbe/base/ixgbe_x540.c | 32 +- drivers/net/ixgbe/base/ixgbe_x540.h |2 +- drivers/net/ixgbe/base/ixgbe_x550.c | 1029 ++ drivers/net/ixgbe/base/ixgbe_x550.h | 20 +- 27 files changed, 1646 insertions(+), 415 deletions(-) -- 1.9.3
[dpdk-dev] [PATCH 00/26] update ixgbe base driver
Acked-by: Helin Zhang > -Original Message- > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Wenzhuo Lu > Sent: Friday, June 5, 2015 1:22 PM > To: dev at dpdk.org > Subject: [dpdk-dev] [PATCH 00/26] update ixgbe base driver > > Short summary: > *update copyright and readme > *fix code comment, double from > *fix typo error in code comment > *check return value after calling > *allow tunneled UDP and TCP frames to reach their destination *erase > ixgbe_get_hi_status *provide unlocked I2C methods *reduce I2C retry count on > X550 devices *issue firmware command when coming up *add logic to reset > CS4227 when needed *restore ESDP settings after MAC reset *disable FEC to > save power *set lan_id for non-PCIe devices *add SFP+ dual-speed support *add > SW based LPLU support *fix flow control for KR backplane *new simplified > x550em init flow *move I2C MUX function from ixgbe_x540.c to ixgbe_x550.c > *change return value for ixgbe_setup_internal_phy_t_x550em > *ixgbe_setup_internal_phy_x550em function clean-up *add x550em Auto neg > Flow Control support *add x550em PHY interrupt and forced 1G/10G support > *add link check support for x550em PHY *set lan_id before first I2C access > *added x550em PHY reset function *block EEE setup on the interfaces which > don't support EEE > > Wenzhuo Lu (26): > ixgbe/base: update copyright and readme > ixgbe/base: fix code comment, double from > ixgbe/base: fix typo error in code comment > ixgbe/base: check return value after calling > ixgbe/base: allow tunneled UDP and TCP frames to reach their > destination > ixgbe/base: erase ixgbe_get_hi_status > ixgbe/base: provide unlocked I2C methods > ixgbe/base: reduce I2C retry count on X550 devices > ixgbe/base: issue firmware command when coming up > ixgbe/base: add logic to reset CS4227 when needed > ixgbe/base: restore ESDP settings after MAC reset > ixgbe/base: disable FEC(Forward Error Correction) to save power > ixgbe/base: set lan_id for non-PCIe devices > ixgbe/base: add SFP+ dual-speed support > ixgbe/base: add SW based LPLU support > ixgbe/base: fix flow control for KR backplane > ixgbe/base: new simplified x550em init flow > ixgbe/base: move I2C MUX function from ixgbe_x540.c to ixgbe_x550.c > ixgbe/base: change return value for ixgbe_setup_internal_phy_t_x550em > ixgbe/base: ixgbe_setup_internal_phy_x550em function clean-up > ixgbe/base: add x550em Auto neg Flow Control support > ixgbe/base: add x550em PHY interrupt and forced 1G/10G support > ixgbe/base: add link check support for x550em PHY > ixgbe/base: set lan_id before first I2C access > ixgbe/base: added x550em PHY reset function > ixgbe/base: block EEE(Energy Efficient Ethernet) setup on the > interfaces that don't support EEE > > drivers/net/ixgbe/base/README|4 +- > drivers/net/ixgbe/base/ixgbe_82598.c |7 +- > drivers/net/ixgbe/base/ixgbe_82598.h |2 +- > drivers/net/ixgbe/base/ixgbe_82599.c | 191 +- > drivers/net/ixgbe/base/ixgbe_82599.h |7 +- > drivers/net/ixgbe/base/ixgbe_api.c | 141 +++- > drivers/net/ixgbe/base/ixgbe_api.h | 16 +- > drivers/net/ixgbe/base/ixgbe_common.c| 270 +++- > drivers/net/ixgbe/base/ixgbe_common.h|9 +- > drivers/net/ixgbe/base/ixgbe_dcb.c |2 +- > drivers/net/ixgbe/base/ixgbe_dcb.h |2 +- > drivers/net/ixgbe/base/ixgbe_dcb_82598.c |2 +- > drivers/net/ixgbe/base/ixgbe_dcb_82598.h |2 +- > drivers/net/ixgbe/base/ixgbe_dcb_82599.c |2 +- > drivers/net/ixgbe/base/ixgbe_dcb_82599.h |2 +- > drivers/net/ixgbe/base/ixgbe_mbx.c |2 +- > drivers/net/ixgbe/base/ixgbe_mbx.h |2 +- > drivers/net/ixgbe/base/ixgbe_osdep.h |2 +- > drivers/net/ixgbe/base/ixgbe_phy.c | 215 ++- > drivers/net/ixgbe/base/ixgbe_phy.h | 23 +- > drivers/net/ixgbe/base/ixgbe_type.h | 70 +- > drivers/net/ixgbe/base/ixgbe_vf.c|3 +- > drivers/net/ixgbe/base/ixgbe_vf.h|2 +- > drivers/net/ixgbe/base/ixgbe_x540.c | 32 +- > drivers/net/ixgbe/base/ixgbe_x540.h |2 +- > drivers/net/ixgbe/base/ixgbe_x550.c | 1029 > ++ > drivers/net/ixgbe/base/ixgbe_x550.h | 20 +- > 27 files changed, 1646 insertions(+), 415 deletions(-) > > -- > 1.9.3
[dpdk-dev] [PATCH 00/26] update ixgbe base driver
> > Wenzhuo Lu (26): > > ixgbe/base: update copyright and readme > > ixgbe/base: fix code comment, double from > > ixgbe/base: fix typo error in code comment > > ixgbe/base: check return value after calling > > ixgbe/base: allow tunneled UDP and TCP frames to reach their > > destination > > ixgbe/base: erase ixgbe_get_hi_status > > ixgbe/base: provide unlocked I2C methods > > ixgbe/base: reduce I2C retry count on X550 devices > > ixgbe/base: issue firmware command when coming up > > ixgbe/base: add logic to reset CS4227 when needed > > ixgbe/base: restore ESDP settings after MAC reset > > ixgbe/base: disable FEC(Forward Error Correction) to save power > > ixgbe/base: set lan_id for non-PCIe devices > > ixgbe/base: add SFP+ dual-speed support > > ixgbe/base: add SW based LPLU support > > ixgbe/base: fix flow control for KR backplane > > ixgbe/base: new simplified x550em init flow > > ixgbe/base: move I2C MUX function from ixgbe_x540.c to ixgbe_x550.c > > ixgbe/base: change return value for ixgbe_setup_internal_phy_t_x550em > > ixgbe/base: ixgbe_setup_internal_phy_x550em function clean-up > > ixgbe/base: add x550em Auto neg Flow Control support > > ixgbe/base: add x550em PHY interrupt and forced 1G/10G support > > ixgbe/base: add link check support for x550em PHY > > ixgbe/base: set lan_id before first I2C access > > ixgbe/base: added x550em PHY reset function > > ixgbe/base: block EEE(Energy Efficient Ethernet) setup on the > > interfaces that don't support EEE > > Acked-by: Helin Zhang This bulked update has some good commit messages. Applied, thanks
