Re: Apache Manifold 2.10
You can just change the setup provided you point to the same database. Thanks, Karl On Mon, Dec 3, 2018 at 9:57 AM krishna agrawal wrote: > thanks Karl, > > I have deployed in my local as simple example and in Dev and QA with the > recomendation of Dev Ops team we deployed as multiprocess file example we > had brief discussion about considering multiprocess-zk-example and at that > time we were unsure of multiprocess-zk-example. > > But i will check and let you know if we can change the set up now? > > One question do we need to do fresh install or can we upgrade to > multiprocess-zk-example? > > Thanks for anticipation. > > Thanks, > Krishna A > > On Sat, Dec 1, 2018 at 3:05 PM Karl Wright wrote: > > > Another thing: it's quite important to guarantee a working setup here, > > otherwise you're just wasting everyone's time. So, please base your > > installation on the multiprocess-zk-example. Start off by running the > > example as is, on a small test crawl. Once you know how it works, then > > move next to changing only what you have to -- namely, the database > > properties in the global properties file, to point to your MySQL > instance. > > Try that also on a small test case (crawl some files for instance), > before > > trying it on your large case. Every step of the way should work, and if > it > > doesn't, figure out why not before you move onto the next step. > > > > Thanks, > > Karl > > > > > > On Sat, Dec 1, 2018 at 2:59 PM Karl Wright wrote: > > > > > Zookeeper does not require a locking directory. It is a process that > > > synchronizes other processes, and they connect to it by port. > > > > > > Karl > > > > > > > > > On Sat, Dec 1, 2018 at 2:55 PM krishna agrawal > > > wrote: > > > > > >> Thanks for the information. > > >> if we use Zookeeper how can we make sure all our ManifoldCF processes > > use > > >> same locking directory does it can be done at the configuration level > > >> while > > >> installing. > > >> > > >> thanks, > > >> Krishna A > > >> > > >> On Sat, Dec 1, 2018 at 1:39 PM Karl Wright > wrote: > > >> > > >> > That error is the result of the database not managing transactions > > >> > properly. It can occur if the locking system is not set up > properly, > > >> or if > > >> > you are using multiple agents processes and each process does not > have > > >> its > > >> > own ID. We have also seen it reported before just because MySQL > seems > > >> to > > >> > have bugs and sometimes writes are delayed or don't go through. > > >> > > > >> > My recommendation would be to: > > >> > (1) use zookeeper, not file locking > > >> > (2) Make sure all your ManifoldCF processes use the SAME locking > > >> directory > > >> > or Zookeeper instance > > >> > (3) If you are using multiple agents process, be certain that each > > such > > >> > process gets its own ID (as is done in the examples). > > >> > > > >> > Karl > > >> > > > >> > > > >> > On Sat, Dec 1, 2018 at 11:43 AM krishna agrawal < > krish.a...@gmail.com > > > > > >> > wrote: > > >> > > > >> > > Thanks Karl, > > >> > > > > >> > > I will take a look at it > > >> > > > > >> > > But there is the error keep on tossing at manifold log > > >> > > > > >> > > ERROR 2018-12-01T11:13:26,297 (Job reset thread) - Exception > tossed: > > >> > > Unexpected job status encountered: 33 > > >> > > org.apache.manifoldcf.core.interfaces.ManifoldCFException: > > Unexpected > > >> job > > >> > > status encountered: 33 > > >> > > at > > >> > > > > >> > > org.apache.manifoldcf.crawler.jobs.Jobs.returnJobToActive(Jobs.java:2145) > > >> > > ~[mcf-pull-agent.jar:?] > > >> > > at > > >> > > > > >> > > > > >> > > > >> > > > org.apache.manifoldcf.crawler.jobs.JobManager.resetJobs(JobManager.java:8449) > > >> > > ~[mcf-pull-agent.jar:?] > > >> > > at > > >> > > > > >> > > > > >> > > > >> > > > org.apache.manifoldcf.crawler.system.JobResetThread.run(JobResetThread.java:77) > > >> > > [mcf-pull-agent.jar:?] > > >> > > > > >> > > Thanks, > > >> > > Krishna A > > >> > > > > >> > > > > >> > > On Fri, Nov 30, 2018 at 7:00 PM Karl Wright > > >> wrote: > > >> > > > > >> > > > Hi Krishna, > > >> > > > > > >> > > > First of all I suggest that you *not* use > > multiprocess-file-example, > > >> > and > > >> > > > instead use multiprocess-zk-example. > > >> > > > > > >> > > > Your symptoms suggest many possibilities. But if you move to > > >> Zookeeper > > >> > > we > > >> > > > will be able to eliminate dangling file locks as a complication. > > So > > >> > > please > > >> > > > do that first. > > >> > > > > > >> > > > Karl > > >> > > > > > >> > > > > > >> > > > On Fri, Nov 30, 2018 at 6:29 PM krishna agrawal < > > >> krish.a...@gmail.com> > > >> > > > wrote: > > >> > > > > > >> > > > > Yeah in our local set up we did Simple example but in server > we > > >> did > > >> > > > > multiprocess-file-example are you suggesting us to upgrade > from > > >> 2.10 > > >> > to > > >> > > > > 2.11 ? > > >> > > > > > > >> > > > > and we are using MY Sql database , > > >> >
Re: Apache Manifold 2.10
thanks Karl, I have deployed in my local as simple example and in Dev and QA with the recomendation of Dev Ops team we deployed as multiprocess file example we had brief discussion about considering multiprocess-zk-example and at that time we were unsure of multiprocess-zk-example. But i will check and let you know if we can change the set up now? One question do we need to do fresh install or can we upgrade to multiprocess-zk-example? Thanks for anticipation. Thanks, Krishna A On Sat, Dec 1, 2018 at 3:05 PM Karl Wright wrote: > Another thing: it's quite important to guarantee a working setup here, > otherwise you're just wasting everyone's time. So, please base your > installation on the multiprocess-zk-example. Start off by running the > example as is, on a small test crawl. Once you know how it works, then > move next to changing only what you have to -- namely, the database > properties in the global properties file, to point to your MySQL instance. > Try that also on a small test case (crawl some files for instance), before > trying it on your large case. Every step of the way should work, and if it > doesn't, figure out why not before you move onto the next step. > > Thanks, > Karl > > > On Sat, Dec 1, 2018 at 2:59 PM Karl Wright wrote: > > > Zookeeper does not require a locking directory. It is a process that > > synchronizes other processes, and they connect to it by port. > > > > Karl > > > > > > On Sat, Dec 1, 2018 at 2:55 PM krishna agrawal > > wrote: > > > >> Thanks for the information. > >> if we use Zookeeper how can we make sure all our ManifoldCF processes > use > >> same locking directory does it can be done at the configuration level > >> while > >> installing. > >> > >> thanks, > >> Krishna A > >> > >> On Sat, Dec 1, 2018 at 1:39 PM Karl Wright wrote: > >> > >> > That error is the result of the database not managing transactions > >> > properly. It can occur if the locking system is not set up properly, > >> or if > >> > you are using multiple agents processes and each process does not have > >> its > >> > own ID. We have also seen it reported before just because MySQL seems > >> to > >> > have bugs and sometimes writes are delayed or don't go through. > >> > > >> > My recommendation would be to: > >> > (1) use zookeeper, not file locking > >> > (2) Make sure all your ManifoldCF processes use the SAME locking > >> directory > >> > or Zookeeper instance > >> > (3) If you are using multiple agents process, be certain that each > such > >> > process gets its own ID (as is done in the examples). > >> > > >> > Karl > >> > > >> > > >> > On Sat, Dec 1, 2018 at 11:43 AM krishna agrawal > > >> > wrote: > >> > > >> > > Thanks Karl, > >> > > > >> > > I will take a look at it > >> > > > >> > > But there is the error keep on tossing at manifold log > >> > > > >> > > ERROR 2018-12-01T11:13:26,297 (Job reset thread) - Exception tossed: > >> > > Unexpected job status encountered: 33 > >> > > org.apache.manifoldcf.core.interfaces.ManifoldCFException: > Unexpected > >> job > >> > > status encountered: 33 > >> > > at > >> > > > >> > org.apache.manifoldcf.crawler.jobs.Jobs.returnJobToActive(Jobs.java:2145) > >> > > ~[mcf-pull-agent.jar:?] > >> > > at > >> > > > >> > > > >> > > >> > org.apache.manifoldcf.crawler.jobs.JobManager.resetJobs(JobManager.java:8449) > >> > > ~[mcf-pull-agent.jar:?] > >> > > at > >> > > > >> > > > >> > > >> > org.apache.manifoldcf.crawler.system.JobResetThread.run(JobResetThread.java:77) > >> > > [mcf-pull-agent.jar:?] > >> > > > >> > > Thanks, > >> > > Krishna A > >> > > > >> > > > >> > > On Fri, Nov 30, 2018 at 7:00 PM Karl Wright > >> wrote: > >> > > > >> > > > Hi Krishna, > >> > > > > >> > > > First of all I suggest that you *not* use > multiprocess-file-example, > >> > and > >> > > > instead use multiprocess-zk-example. > >> > > > > >> > > > Your symptoms suggest many possibilities. But if you move to > >> Zookeeper > >> > > we > >> > > > will be able to eliminate dangling file locks as a complication. > So > >> > > please > >> > > > do that first. > >> > > > > >> > > > Karl > >> > > > > >> > > > > >> > > > On Fri, Nov 30, 2018 at 6:29 PM krishna agrawal < > >> krish.a...@gmail.com> > >> > > > wrote: > >> > > > > >> > > > > Yeah in our local set up we did Simple example but in server we > >> did > >> > > > > multiprocess-file-example are you suggesting us to upgrade from > >> 2.10 > >> > to > >> > > > > 2.11 ? > >> > > > > > >> > > > > and we are using MY Sql database , > >> > > > > > >> > > > > So most of time i saw nothing is running and still it say job is > >> > > running > >> > > > > and you have to wait for it to complete. > >> > > > > > >> > > > > and restarting also not helping. > >> > > > > > >> > > > > Any other solution woould be greatly appreciated. > >> > > > > > >> > > > > Thanks, > >> > > > > Krishna A > >> > > > > > >> > > > > On Fri, Nov 30, 2018 at 10:50 AM Karl Wright < > daddy...@gmail.com> > >> > > wrote: > >> > > > > > >> > > > > >
Re: Apache Manifold 2.10
Another thing: it's quite important to guarantee a working setup here, otherwise you're just wasting everyone's time. So, please base your installation on the multiprocess-zk-example. Start off by running the example as is, on a small test crawl. Once you know how it works, then move next to changing only what you have to -- namely, the database properties in the global properties file, to point to your MySQL instance. Try that also on a small test case (crawl some files for instance), before trying it on your large case. Every step of the way should work, and if it doesn't, figure out why not before you move onto the next step. Thanks, Karl On Sat, Dec 1, 2018 at 2:59 PM Karl Wright wrote: > Zookeeper does not require a locking directory. It is a process that > synchronizes other processes, and they connect to it by port. > > Karl > > > On Sat, Dec 1, 2018 at 2:55 PM krishna agrawal > wrote: > >> Thanks for the information. >> if we use Zookeeper how can we make sure all our ManifoldCF processes use >> same locking directory does it can be done at the configuration level >> while >> installing. >> >> thanks, >> Krishna A >> >> On Sat, Dec 1, 2018 at 1:39 PM Karl Wright wrote: >> >> > That error is the result of the database not managing transactions >> > properly. It can occur if the locking system is not set up properly, >> or if >> > you are using multiple agents processes and each process does not have >> its >> > own ID. We have also seen it reported before just because MySQL seems >> to >> > have bugs and sometimes writes are delayed or don't go through. >> > >> > My recommendation would be to: >> > (1) use zookeeper, not file locking >> > (2) Make sure all your ManifoldCF processes use the SAME locking >> directory >> > or Zookeeper instance >> > (3) If you are using multiple agents process, be certain that each such >> > process gets its own ID (as is done in the examples). >> > >> > Karl >> > >> > >> > On Sat, Dec 1, 2018 at 11:43 AM krishna agrawal >> > wrote: >> > >> > > Thanks Karl, >> > > >> > > I will take a look at it >> > > >> > > But there is the error keep on tossing at manifold log >> > > >> > > ERROR 2018-12-01T11:13:26,297 (Job reset thread) - Exception tossed: >> > > Unexpected job status encountered: 33 >> > > org.apache.manifoldcf.core.interfaces.ManifoldCFException: Unexpected >> job >> > > status encountered: 33 >> > > at >> > > >> org.apache.manifoldcf.crawler.jobs.Jobs.returnJobToActive(Jobs.java:2145) >> > > ~[mcf-pull-agent.jar:?] >> > > at >> > > >> > > >> > >> org.apache.manifoldcf.crawler.jobs.JobManager.resetJobs(JobManager.java:8449) >> > > ~[mcf-pull-agent.jar:?] >> > > at >> > > >> > > >> > >> org.apache.manifoldcf.crawler.system.JobResetThread.run(JobResetThread.java:77) >> > > [mcf-pull-agent.jar:?] >> > > >> > > Thanks, >> > > Krishna A >> > > >> > > >> > > On Fri, Nov 30, 2018 at 7:00 PM Karl Wright >> wrote: >> > > >> > > > Hi Krishna, >> > > > >> > > > First of all I suggest that you *not* use multiprocess-file-example, >> > and >> > > > instead use multiprocess-zk-example. >> > > > >> > > > Your symptoms suggest many possibilities. But if you move to >> Zookeeper >> > > we >> > > > will be able to eliminate dangling file locks as a complication. So >> > > please >> > > > do that first. >> > > > >> > > > Karl >> > > > >> > > > >> > > > On Fri, Nov 30, 2018 at 6:29 PM krishna agrawal < >> krish.a...@gmail.com> >> > > > wrote: >> > > > >> > > > > Yeah in our local set up we did Simple example but in server we >> did >> > > > > multiprocess-file-example are you suggesting us to upgrade from >> 2.10 >> > to >> > > > > 2.11 ? >> > > > > >> > > > > and we are using MY Sql database , >> > > > > >> > > > > So most of time i saw nothing is running and still it say job is >> > > running >> > > > > and you have to wait for it to complete. >> > > > > >> > > > > and restarting also not helping. >> > > > > >> > > > > Any other solution woould be greatly appreciated. >> > > > > >> > > > > Thanks, >> > > > > Krishna A >> > > > > >> > > > > On Fri, Nov 30, 2018 at 10:50 AM Karl Wright >> > > wrote: >> > > > > >> > > > > > It also may be useful to start with the simple example, which is >> > not >> > > > > > multiprocess, and get familiar with using ManifoldCF that way, >> > before >> > > > you >> > > > > > try to go to a more complicated setup. >> > > > > > >> > > > > > Thanks, >> > > > > > Karl >> > > > > > >> > > > > > >> > > > > > On Fri, Nov 30, 2018 at 9:46 AM Karl Wright > > >> > > > wrote: >> > > > > > >> > > > > > > "simplified multi-process"? There is no such example. >> > > > > > > >> > > > > > > These are the examples available. Which one are you using? >> > > > > > > >> > > > > > > 11/15/2018 03:40 AM example >> > > > > > > 11/15/2018 03:40 AM example-proprietary >> > > > > > > 11/15/2018 03:40 AM >> multiprocess-file-example >> > > > > > > 11/15/2018 03:40 AM >> > > > > > >
Re: Apache Manifold 2.10
Zookeeper does not require a locking directory. It is a process that synchronizes other processes, and they connect to it by port. Karl On Sat, Dec 1, 2018 at 2:55 PM krishna agrawal wrote: > Thanks for the information. > if we use Zookeeper how can we make sure all our ManifoldCF processes use > same locking directory does it can be done at the configuration level while > installing. > > thanks, > Krishna A > > On Sat, Dec 1, 2018 at 1:39 PM Karl Wright wrote: > > > That error is the result of the database not managing transactions > > properly. It can occur if the locking system is not set up properly, or > if > > you are using multiple agents processes and each process does not have > its > > own ID. We have also seen it reported before just because MySQL seems to > > have bugs and sometimes writes are delayed or don't go through. > > > > My recommendation would be to: > > (1) use zookeeper, not file locking > > (2) Make sure all your ManifoldCF processes use the SAME locking > directory > > or Zookeeper instance > > (3) If you are using multiple agents process, be certain that each such > > process gets its own ID (as is done in the examples). > > > > Karl > > > > > > On Sat, Dec 1, 2018 at 11:43 AM krishna agrawal > > wrote: > > > > > Thanks Karl, > > > > > > I will take a look at it > > > > > > But there is the error keep on tossing at manifold log > > > > > > ERROR 2018-12-01T11:13:26,297 (Job reset thread) - Exception tossed: > > > Unexpected job status encountered: 33 > > > org.apache.manifoldcf.core.interfaces.ManifoldCFException: Unexpected > job > > > status encountered: 33 > > > at > > > > org.apache.manifoldcf.crawler.jobs.Jobs.returnJobToActive(Jobs.java:2145) > > > ~[mcf-pull-agent.jar:?] > > > at > > > > > > > > > org.apache.manifoldcf.crawler.jobs.JobManager.resetJobs(JobManager.java:8449) > > > ~[mcf-pull-agent.jar:?] > > > at > > > > > > > > > org.apache.manifoldcf.crawler.system.JobResetThread.run(JobResetThread.java:77) > > > [mcf-pull-agent.jar:?] > > > > > > Thanks, > > > Krishna A > > > > > > > > > On Fri, Nov 30, 2018 at 7:00 PM Karl Wright > wrote: > > > > > > > Hi Krishna, > > > > > > > > First of all I suggest that you *not* use multiprocess-file-example, > > and > > > > instead use multiprocess-zk-example. > > > > > > > > Your symptoms suggest many possibilities. But if you move to > Zookeeper > > > we > > > > will be able to eliminate dangling file locks as a complication. So > > > please > > > > do that first. > > > > > > > > Karl > > > > > > > > > > > > On Fri, Nov 30, 2018 at 6:29 PM krishna agrawal < > krish.a...@gmail.com> > > > > wrote: > > > > > > > > > Yeah in our local set up we did Simple example but in server we > did > > > > > multiprocess-file-example are you suggesting us to upgrade from > 2.10 > > to > > > > > 2.11 ? > > > > > > > > > > and we are using MY Sql database , > > > > > > > > > > So most of time i saw nothing is running and still it say job is > > > running > > > > > and you have to wait for it to complete. > > > > > > > > > > and restarting also not helping. > > > > > > > > > > Any other solution woould be greatly appreciated. > > > > > > > > > > Thanks, > > > > > Krishna A > > > > > > > > > > On Fri, Nov 30, 2018 at 10:50 AM Karl Wright > > > wrote: > > > > > > > > > > > It also may be useful to start with the simple example, which is > > not > > > > > > multiprocess, and get familiar with using ManifoldCF that way, > > before > > > > you > > > > > > try to go to a more complicated setup. > > > > > > > > > > > > Thanks, > > > > > > Karl > > > > > > > > > > > > > > > > > > On Fri, Nov 30, 2018 at 9:46 AM Karl Wright > > > > wrote: > > > > > > > > > > > > > "simplified multi-process"? There is no such example. > > > > > > > > > > > > > > These are the examples available. Which one are you using? > > > > > > > > > > > > > > 11/15/2018 03:40 AM example > > > > > > > 11/15/2018 03:40 AM example-proprietary > > > > > > > 11/15/2018 03:40 AM > multiprocess-file-example > > > > > > > 11/15/2018 03:40 AM > > > > > > > multiprocess-file-example-proprietary > > > > > > > 11/15/2018 03:40 AM multiprocess-zk-example > > > > > > > 11/15/2018 03:40 AM > > > > > > multiprocess-zk-example-proprietary > > > > > > > > > > > > > > Cleaning locks makes no sense unless you are using the > > > > > multiprocess-file > > > > > > > setup. This is deprecated, by the way, in favor of the > Zookeeper > > > > > setup. > > > > > > > > > > > > > > As for the buttons, please read: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://manifoldcf.apache.org/release/release-2.11/en_US/end-user-documentation.html#outputs > > > > > > > > > > > > > > The buttons in question are "Reindex all..." and "Remove > all..." > > > > > > > > > > > > > > Karl > > > > > > > > > > > > > > > > > > > > > On Fri, Nov 30, 2018 at 9:36 AM krishna agrawal < > > > > krish.a...@gmail.com> > > >
Re: Apache Manifold 2.10
Thanks for the information. if we use Zookeeper how can we make sure all our ManifoldCF processes use same locking directory does it can be done at the configuration level while installing. thanks, Krishna A On Sat, Dec 1, 2018 at 1:39 PM Karl Wright wrote: > That error is the result of the database not managing transactions > properly. It can occur if the locking system is not set up properly, or if > you are using multiple agents processes and each process does not have its > own ID. We have also seen it reported before just because MySQL seems to > have bugs and sometimes writes are delayed or don't go through. > > My recommendation would be to: > (1) use zookeeper, not file locking > (2) Make sure all your ManifoldCF processes use the SAME locking directory > or Zookeeper instance > (3) If you are using multiple agents process, be certain that each such > process gets its own ID (as is done in the examples). > > Karl > > > On Sat, Dec 1, 2018 at 11:43 AM krishna agrawal > wrote: > > > Thanks Karl, > > > > I will take a look at it > > > > But there is the error keep on tossing at manifold log > > > > ERROR 2018-12-01T11:13:26,297 (Job reset thread) - Exception tossed: > > Unexpected job status encountered: 33 > > org.apache.manifoldcf.core.interfaces.ManifoldCFException: Unexpected job > > status encountered: 33 > > at > > org.apache.manifoldcf.crawler.jobs.Jobs.returnJobToActive(Jobs.java:2145) > > ~[mcf-pull-agent.jar:?] > > at > > > > > org.apache.manifoldcf.crawler.jobs.JobManager.resetJobs(JobManager.java:8449) > > ~[mcf-pull-agent.jar:?] > > at > > > > > org.apache.manifoldcf.crawler.system.JobResetThread.run(JobResetThread.java:77) > > [mcf-pull-agent.jar:?] > > > > Thanks, > > Krishna A > > > > > > On Fri, Nov 30, 2018 at 7:00 PM Karl Wright wrote: > > > > > Hi Krishna, > > > > > > First of all I suggest that you *not* use multiprocess-file-example, > and > > > instead use multiprocess-zk-example. > > > > > > Your symptoms suggest many possibilities. But if you move to Zookeeper > > we > > > will be able to eliminate dangling file locks as a complication. So > > please > > > do that first. > > > > > > Karl > > > > > > > > > On Fri, Nov 30, 2018 at 6:29 PM krishna agrawal > > > wrote: > > > > > > > Yeah in our local set up we did Simple example but in server we did > > > > multiprocess-file-example are you suggesting us to upgrade from 2.10 > to > > > > 2.11 ? > > > > > > > > and we are using MY Sql database , > > > > > > > > So most of time i saw nothing is running and still it say job is > > running > > > > and you have to wait for it to complete. > > > > > > > > and restarting also not helping. > > > > > > > > Any other solution woould be greatly appreciated. > > > > > > > > Thanks, > > > > Krishna A > > > > > > > > On Fri, Nov 30, 2018 at 10:50 AM Karl Wright > > wrote: > > > > > > > > > It also may be useful to start with the simple example, which is > not > > > > > multiprocess, and get familiar with using ManifoldCF that way, > before > > > you > > > > > try to go to a more complicated setup. > > > > > > > > > > Thanks, > > > > > Karl > > > > > > > > > > > > > > > On Fri, Nov 30, 2018 at 9:46 AM Karl Wright > > > wrote: > > > > > > > > > > > "simplified multi-process"? There is no such example. > > > > > > > > > > > > These are the examples available. Which one are you using? > > > > > > > > > > > > 11/15/2018 03:40 AM example > > > > > > 11/15/2018 03:40 AM example-proprietary > > > > > > 11/15/2018 03:40 AM multiprocess-file-example > > > > > > 11/15/2018 03:40 AM > > > > > > multiprocess-file-example-proprietary > > > > > > 11/15/2018 03:40 AM multiprocess-zk-example > > > > > > 11/15/2018 03:40 AM > > > > > multiprocess-zk-example-proprietary > > > > > > > > > > > > Cleaning locks makes no sense unless you are using the > > > > multiprocess-file > > > > > > setup. This is deprecated, by the way, in favor of the Zookeeper > > > > setup. > > > > > > > > > > > > As for the buttons, please read: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://manifoldcf.apache.org/release/release-2.11/en_US/end-user-documentation.html#outputs > > > > > > > > > > > > The buttons in question are "Reindex all..." and "Remove all..." > > > > > > > > > > > > Karl > > > > > > > > > > > > > > > > > > On Fri, Nov 30, 2018 at 9:36 AM krishna agrawal < > > > krish.a...@gmail.com> > > > > > > wrote: > > > > > > > > > > > >> We have deployed the Manifold using > > > > > >> > > > > > >>- Simplified multi-process model > > > > > >> > > > > > >> We did try clean up of lock Sh but that also did not work. > > > > > >> > > > > > >> I dont have forget all document button in output connector. > > > > > >> > > > > > >> [image: image.png] > > > > > >> > > > > > >> On Thu, Nov 29, 2018 at 6:52 PM Karl Wright > > > > > wrote: > > > > > >> > > > > > >>> Hi Krishna, > > > > > >>> > > > > > >>> Please give us some
Re: Apache Manifold 2.10
That error is the result of the database not managing transactions properly. It can occur if the locking system is not set up properly, or if you are using multiple agents processes and each process does not have its own ID. We have also seen it reported before just because MySQL seems to have bugs and sometimes writes are delayed or don't go through. My recommendation would be to: (1) use zookeeper, not file locking (2) Make sure all your ManifoldCF processes use the SAME locking directory or Zookeeper instance (3) If you are using multiple agents process, be certain that each such process gets its own ID (as is done in the examples). Karl On Sat, Dec 1, 2018 at 11:43 AM krishna agrawal wrote: > Thanks Karl, > > I will take a look at it > > But there is the error keep on tossing at manifold log > > ERROR 2018-12-01T11:13:26,297 (Job reset thread) - Exception tossed: > Unexpected job status encountered: 33 > org.apache.manifoldcf.core.interfaces.ManifoldCFException: Unexpected job > status encountered: 33 > at > org.apache.manifoldcf.crawler.jobs.Jobs.returnJobToActive(Jobs.java:2145) > ~[mcf-pull-agent.jar:?] > at > > org.apache.manifoldcf.crawler.jobs.JobManager.resetJobs(JobManager.java:8449) > ~[mcf-pull-agent.jar:?] > at > > org.apache.manifoldcf.crawler.system.JobResetThread.run(JobResetThread.java:77) > [mcf-pull-agent.jar:?] > > Thanks, > Krishna A > > > On Fri, Nov 30, 2018 at 7:00 PM Karl Wright wrote: > > > Hi Krishna, > > > > First of all I suggest that you *not* use multiprocess-file-example, and > > instead use multiprocess-zk-example. > > > > Your symptoms suggest many possibilities. But if you move to Zookeeper > we > > will be able to eliminate dangling file locks as a complication. So > please > > do that first. > > > > Karl > > > > > > On Fri, Nov 30, 2018 at 6:29 PM krishna agrawal > > wrote: > > > > > Yeah in our local set up we did Simple example but in server we did > > > multiprocess-file-example are you suggesting us to upgrade from 2.10 to > > > 2.11 ? > > > > > > and we are using MY Sql database , > > > > > > So most of time i saw nothing is running and still it say job is > running > > > and you have to wait for it to complete. > > > > > > and restarting also not helping. > > > > > > Any other solution woould be greatly appreciated. > > > > > > Thanks, > > > Krishna A > > > > > > On Fri, Nov 30, 2018 at 10:50 AM Karl Wright > wrote: > > > > > > > It also may be useful to start with the simple example, which is not > > > > multiprocess, and get familiar with using ManifoldCF that way, before > > you > > > > try to go to a more complicated setup. > > > > > > > > Thanks, > > > > Karl > > > > > > > > > > > > On Fri, Nov 30, 2018 at 9:46 AM Karl Wright > > wrote: > > > > > > > > > "simplified multi-process"? There is no such example. > > > > > > > > > > These are the examples available. Which one are you using? > > > > > > > > > > 11/15/2018 03:40 AM example > > > > > 11/15/2018 03:40 AM example-proprietary > > > > > 11/15/2018 03:40 AM multiprocess-file-example > > > > > 11/15/2018 03:40 AM > > > > > multiprocess-file-example-proprietary > > > > > 11/15/2018 03:40 AM multiprocess-zk-example > > > > > 11/15/2018 03:40 AM > > > > multiprocess-zk-example-proprietary > > > > > > > > > > Cleaning locks makes no sense unless you are using the > > > multiprocess-file > > > > > setup. This is deprecated, by the way, in favor of the Zookeeper > > > setup. > > > > > > > > > > As for the buttons, please read: > > > > > > > > > > > > > > > > > > > > > > > > > https://manifoldcf.apache.org/release/release-2.11/en_US/end-user-documentation.html#outputs > > > > > > > > > > The buttons in question are "Reindex all..." and "Remove all..." > > > > > > > > > > Karl > > > > > > > > > > > > > > > On Fri, Nov 30, 2018 at 9:36 AM krishna agrawal < > > krish.a...@gmail.com> > > > > > wrote: > > > > > > > > > >> We have deployed the Manifold using > > > > >> > > > > >>- Simplified multi-process model > > > > >> > > > > >> We did try clean up of lock Sh but that also did not work. > > > > >> > > > > >> I dont have forget all document button in output connector. > > > > >> > > > > >> [image: image.png] > > > > >> > > > > >> On Thu, Nov 29, 2018 at 6:52 PM Karl Wright > > > wrote: > > > > >> > > > > >>> Hi Krishna, > > > > >>> > > > > >>> Please give us some background as to how you've deployed > > ManifoldCF. > > > > Are > > > > >>> you using one of the examples? If so, which one? > > > > >>> > > > > >>> The detailed answer to your question is: the job must delete all > > > > >>> documents > > > > >>> it indexed before it can be deleted. That is the typical way > jobs > > > > work. > > > > >>> Thus, if you shut down the target of your output connection, you > > may > > > be > > > > >>> blocked in deleting your job. > > > > >>> > > > > >>> At that point, you can either (a) restart the target of your > output > > > > >>>
Re: Apache Manifold 2.10
Thanks Karl, I will take a look at it But there is the error keep on tossing at manifold log ERROR 2018-12-01T11:13:26,297 (Job reset thread) - Exception tossed: Unexpected job status encountered: 33 org.apache.manifoldcf.core.interfaces.ManifoldCFException: Unexpected job status encountered: 33 at org.apache.manifoldcf.crawler.jobs.Jobs.returnJobToActive(Jobs.java:2145) ~[mcf-pull-agent.jar:?] at org.apache.manifoldcf.crawler.jobs.JobManager.resetJobs(JobManager.java:8449) ~[mcf-pull-agent.jar:?] at org.apache.manifoldcf.crawler.system.JobResetThread.run(JobResetThread.java:77) [mcf-pull-agent.jar:?] Thanks, Krishna A On Fri, Nov 30, 2018 at 7:00 PM Karl Wright wrote: > Hi Krishna, > > First of all I suggest that you *not* use multiprocess-file-example, and > instead use multiprocess-zk-example. > > Your symptoms suggest many possibilities. But if you move to Zookeeper we > will be able to eliminate dangling file locks as a complication. So please > do that first. > > Karl > > > On Fri, Nov 30, 2018 at 6:29 PM krishna agrawal > wrote: > > > Yeah in our local set up we did Simple example but in server we did > > multiprocess-file-example are you suggesting us to upgrade from 2.10 to > > 2.11 ? > > > > and we are using MY Sql database , > > > > So most of time i saw nothing is running and still it say job is running > > and you have to wait for it to complete. > > > > and restarting also not helping. > > > > Any other solution woould be greatly appreciated. > > > > Thanks, > > Krishna A > > > > On Fri, Nov 30, 2018 at 10:50 AM Karl Wright wrote: > > > > > It also may be useful to start with the simple example, which is not > > > multiprocess, and get familiar with using ManifoldCF that way, before > you > > > try to go to a more complicated setup. > > > > > > Thanks, > > > Karl > > > > > > > > > On Fri, Nov 30, 2018 at 9:46 AM Karl Wright > wrote: > > > > > > > "simplified multi-process"? There is no such example. > > > > > > > > These are the examples available. Which one are you using? > > > > > > > > 11/15/2018 03:40 AM example > > > > 11/15/2018 03:40 AM example-proprietary > > > > 11/15/2018 03:40 AM multiprocess-file-example > > > > 11/15/2018 03:40 AM > > > > multiprocess-file-example-proprietary > > > > 11/15/2018 03:40 AM multiprocess-zk-example > > > > 11/15/2018 03:40 AM > > > multiprocess-zk-example-proprietary > > > > > > > > Cleaning locks makes no sense unless you are using the > > multiprocess-file > > > > setup. This is deprecated, by the way, in favor of the Zookeeper > > setup. > > > > > > > > As for the buttons, please read: > > > > > > > > > > > > > > > > > > https://manifoldcf.apache.org/release/release-2.11/en_US/end-user-documentation.html#outputs > > > > > > > > The buttons in question are "Reindex all..." and "Remove all..." > > > > > > > > Karl > > > > > > > > > > > > On Fri, Nov 30, 2018 at 9:36 AM krishna agrawal < > krish.a...@gmail.com> > > > > wrote: > > > > > > > >> We have deployed the Manifold using > > > >> > > > >>- Simplified multi-process model > > > >> > > > >> We did try clean up of lock Sh but that also did not work. > > > >> > > > >> I dont have forget all document button in output connector. > > > >> > > > >> [image: image.png] > > > >> > > > >> On Thu, Nov 29, 2018 at 6:52 PM Karl Wright > > wrote: > > > >> > > > >>> Hi Krishna, > > > >>> > > > >>> Please give us some background as to how you've deployed > ManifoldCF. > > > Are > > > >>> you using one of the examples? If so, which one? > > > >>> > > > >>> The detailed answer to your question is: the job must delete all > > > >>> documents > > > >>> it indexed before it can be deleted. That is the typical way jobs > > > work. > > > >>> Thus, if you shut down the target of your output connection, you > may > > be > > > >>> blocked in deleting your job. > > > >>> > > > >>> At that point, you can either (a) restart the target of your output > > > >>> connection, or (b) go to the "view" page for the output connection > > and > > > >>> click both of the "forget all documents" buttons on it. (b) is not > > > >>> recommended unless you really want to start over fresh on your > output > > > >>> index. > > > >>> > > > >>> Thanks, > > > >>> Karl > > > >>> > > > >>> > > > >>> On Thu, Nov 29, 2018 at 3:21 PM krishna agrawal < > > krish.a...@gmail.com> > > > >>> wrote: > > > >>> > > > >>> > Hi We are facing issue of action button is not available > > > >>> > > > > >>> > [image: image.png] > > > >>> > > > > >>> > I have stop the agent process but still i am not able to remove > > the > > > >>> job > > > >>> > it say it > > > >>> > > > > >>> > there should be some way to forcefully restart and stop the > running > > > >>> > process ? > > > >>> > > > > >>> > Job 1542835910915 is busy; you must wait and/or shut it down > before > > > >>> > deleting it > > > >>> > but there is no job running, and i am seeing this message from > > past 3 > >
Re: Apache Manifold 2.10
Hi Krishna, First of all I suggest that you *not* use multiprocess-file-example, and instead use multiprocess-zk-example. Your symptoms suggest many possibilities. But if you move to Zookeeper we will be able to eliminate dangling file locks as a complication. So please do that first. Karl On Fri, Nov 30, 2018 at 6:29 PM krishna agrawal wrote: > Yeah in our local set up we did Simple example but in server we did > multiprocess-file-example are you suggesting us to upgrade from 2.10 to > 2.11 ? > > and we are using MY Sql database , > > So most of time i saw nothing is running and still it say job is running > and you have to wait for it to complete. > > and restarting also not helping. > > Any other solution woould be greatly appreciated. > > Thanks, > Krishna A > > On Fri, Nov 30, 2018 at 10:50 AM Karl Wright wrote: > > > It also may be useful to start with the simple example, which is not > > multiprocess, and get familiar with using ManifoldCF that way, before you > > try to go to a more complicated setup. > > > > Thanks, > > Karl > > > > > > On Fri, Nov 30, 2018 at 9:46 AM Karl Wright wrote: > > > > > "simplified multi-process"? There is no such example. > > > > > > These are the examples available. Which one are you using? > > > > > > 11/15/2018 03:40 AM example > > > 11/15/2018 03:40 AM example-proprietary > > > 11/15/2018 03:40 AM multiprocess-file-example > > > 11/15/2018 03:40 AM > > > multiprocess-file-example-proprietary > > > 11/15/2018 03:40 AM multiprocess-zk-example > > > 11/15/2018 03:40 AM > > multiprocess-zk-example-proprietary > > > > > > Cleaning locks makes no sense unless you are using the > multiprocess-file > > > setup. This is deprecated, by the way, in favor of the Zookeeper > setup. > > > > > > As for the buttons, please read: > > > > > > > > > > > > https://manifoldcf.apache.org/release/release-2.11/en_US/end-user-documentation.html#outputs > > > > > > The buttons in question are "Reindex all..." and "Remove all..." > > > > > > Karl > > > > > > > > > On Fri, Nov 30, 2018 at 9:36 AM krishna agrawal > > > wrote: > > > > > >> We have deployed the Manifold using > > >> > > >>- Simplified multi-process model > > >> > > >> We did try clean up of lock Sh but that also did not work. > > >> > > >> I dont have forget all document button in output connector. > > >> > > >> [image: image.png] > > >> > > >> On Thu, Nov 29, 2018 at 6:52 PM Karl Wright > wrote: > > >> > > >>> Hi Krishna, > > >>> > > >>> Please give us some background as to how you've deployed ManifoldCF. > > Are > > >>> you using one of the examples? If so, which one? > > >>> > > >>> The detailed answer to your question is: the job must delete all > > >>> documents > > >>> it indexed before it can be deleted. That is the typical way jobs > > work. > > >>> Thus, if you shut down the target of your output connection, you may > be > > >>> blocked in deleting your job. > > >>> > > >>> At that point, you can either (a) restart the target of your output > > >>> connection, or (b) go to the "view" page for the output connection > and > > >>> click both of the "forget all documents" buttons on it. (b) is not > > >>> recommended unless you really want to start over fresh on your output > > >>> index. > > >>> > > >>> Thanks, > > >>> Karl > > >>> > > >>> > > >>> On Thu, Nov 29, 2018 at 3:21 PM krishna agrawal < > krish.a...@gmail.com> > > >>> wrote: > > >>> > > >>> > Hi We are facing issue of action button is not available > > >>> > > > >>> > [image: image.png] > > >>> > > > >>> > I have stop the agent process but still i am not able to remove > the > > >>> job > > >>> > it say it > > >>> > > > >>> > there should be some way to forcefully restart and stop the running > > >>> > process ? > > >>> > > > >>> > Job 1542835910915 is busy; you must wait and/or shut it down before > > >>> > deleting it > > >>> > but there is no job running, and i am seeing this message from > past 3 > > >>> days. > > >>> > > > >>> > is there any ways to clear this? > > >>> > > > >>> > > > >>> > Any help in this matter will be appreciated. > > >>> > > > >>> > Thanks, > > >>> > Krishna A > > >>> > > > >>> > > >> > > >
Re: Apache Manifold 2.10
Yeah in our local set up we did Simple example but in server we did multiprocess-file-example are you suggesting us to upgrade from 2.10 to 2.11 ? and we are using MY Sql database , So most of time i saw nothing is running and still it say job is running and you have to wait for it to complete. and restarting also not helping. Any other solution woould be greatly appreciated. Thanks, Krishna A On Fri, Nov 30, 2018 at 10:50 AM Karl Wright wrote: > It also may be useful to start with the simple example, which is not > multiprocess, and get familiar with using ManifoldCF that way, before you > try to go to a more complicated setup. > > Thanks, > Karl > > > On Fri, Nov 30, 2018 at 9:46 AM Karl Wright wrote: > > > "simplified multi-process"? There is no such example. > > > > These are the examples available. Which one are you using? > > > > 11/15/2018 03:40 AM example > > 11/15/2018 03:40 AM example-proprietary > > 11/15/2018 03:40 AM multiprocess-file-example > > 11/15/2018 03:40 AM > > multiprocess-file-example-proprietary > > 11/15/2018 03:40 AM multiprocess-zk-example > > 11/15/2018 03:40 AM > multiprocess-zk-example-proprietary > > > > Cleaning locks makes no sense unless you are using the multiprocess-file > > setup. This is deprecated, by the way, in favor of the Zookeeper setup. > > > > As for the buttons, please read: > > > > > > > https://manifoldcf.apache.org/release/release-2.11/en_US/end-user-documentation.html#outputs > > > > The buttons in question are "Reindex all..." and "Remove all..." > > > > Karl > > > > > > On Fri, Nov 30, 2018 at 9:36 AM krishna agrawal > > wrote: > > > >> We have deployed the Manifold using > >> > >>- Simplified multi-process model > >> > >> We did try clean up of lock Sh but that also did not work. > >> > >> I dont have forget all document button in output connector. > >> > >> [image: image.png] > >> > >> On Thu, Nov 29, 2018 at 6:52 PM Karl Wright wrote: > >> > >>> Hi Krishna, > >>> > >>> Please give us some background as to how you've deployed ManifoldCF. > Are > >>> you using one of the examples? If so, which one? > >>> > >>> The detailed answer to your question is: the job must delete all > >>> documents > >>> it indexed before it can be deleted. That is the typical way jobs > work. > >>> Thus, if you shut down the target of your output connection, you may be > >>> blocked in deleting your job. > >>> > >>> At that point, you can either (a) restart the target of your output > >>> connection, or (b) go to the "view" page for the output connection and > >>> click both of the "forget all documents" buttons on it. (b) is not > >>> recommended unless you really want to start over fresh on your output > >>> index. > >>> > >>> Thanks, > >>> Karl > >>> > >>> > >>> On Thu, Nov 29, 2018 at 3:21 PM krishna agrawal > >>> wrote: > >>> > >>> > Hi We are facing issue of action button is not available > >>> > > >>> > [image: image.png] > >>> > > >>> > I have stop the agent process but still i am not able to remove the > >>> job > >>> > it say it > >>> > > >>> > there should be some way to forcefully restart and stop the running > >>> > process ? > >>> > > >>> > Job 1542835910915 is busy; you must wait and/or shut it down before > >>> > deleting it > >>> > but there is no job running, and i am seeing this message from past 3 > >>> days. > >>> > > >>> > is there any ways to clear this? > >>> > > >>> > > >>> > Any help in this matter will be appreciated. > >>> > > >>> > Thanks, > >>> > Krishna A > >>> > > >>> > >> >
Re: Apache Manifold 2.10
It also may be useful to start with the simple example, which is not multiprocess, and get familiar with using ManifoldCF that way, before you try to go to a more complicated setup. Thanks, Karl On Fri, Nov 30, 2018 at 9:46 AM Karl Wright wrote: > "simplified multi-process"? There is no such example. > > These are the examples available. Which one are you using? > > 11/15/2018 03:40 AM example > 11/15/2018 03:40 AM example-proprietary > 11/15/2018 03:40 AM multiprocess-file-example > 11/15/2018 03:40 AM > multiprocess-file-example-proprietary > 11/15/2018 03:40 AM multiprocess-zk-example > 11/15/2018 03:40 AM multiprocess-zk-example-proprietary > > Cleaning locks makes no sense unless you are using the multiprocess-file > setup. This is deprecated, by the way, in favor of the Zookeeper setup. > > As for the buttons, please read: > > > https://manifoldcf.apache.org/release/release-2.11/en_US/end-user-documentation.html#outputs > > The buttons in question are "Reindex all..." and "Remove all..." > > Karl > > > On Fri, Nov 30, 2018 at 9:36 AM krishna agrawal > wrote: > >> We have deployed the Manifold using >> >>- Simplified multi-process model >> >> We did try clean up of lock Sh but that also did not work. >> >> I dont have forget all document button in output connector. >> >> [image: image.png] >> >> On Thu, Nov 29, 2018 at 6:52 PM Karl Wright wrote: >> >>> Hi Krishna, >>> >>> Please give us some background as to how you've deployed ManifoldCF. Are >>> you using one of the examples? If so, which one? >>> >>> The detailed answer to your question is: the job must delete all >>> documents >>> it indexed before it can be deleted. That is the typical way jobs work. >>> Thus, if you shut down the target of your output connection, you may be >>> blocked in deleting your job. >>> >>> At that point, you can either (a) restart the target of your output >>> connection, or (b) go to the "view" page for the output connection and >>> click both of the "forget all documents" buttons on it. (b) is not >>> recommended unless you really want to start over fresh on your output >>> index. >>> >>> Thanks, >>> Karl >>> >>> >>> On Thu, Nov 29, 2018 at 3:21 PM krishna agrawal >>> wrote: >>> >>> > Hi We are facing issue of action button is not available >>> > >>> > [image: image.png] >>> > >>> > I have stop the agent process but still i am not able to remove the >>> job >>> > it say it >>> > >>> > there should be some way to forcefully restart and stop the running >>> > process ? >>> > >>> > Job 1542835910915 is busy; you must wait and/or shut it down before >>> > deleting it >>> > but there is no job running, and i am seeing this message from past 3 >>> days. >>> > >>> > is there any ways to clear this? >>> > >>> > >>> > Any help in this matter will be appreciated. >>> > >>> > Thanks, >>> > Krishna A >>> > >>> >>
Re: Apache Manifold 2.10
"simplified multi-process"? There is no such example. These are the examples available. Which one are you using? 11/15/2018 03:40 AM example 11/15/2018 03:40 AM example-proprietary 11/15/2018 03:40 AM multiprocess-file-example 11/15/2018 03:40 AM multiprocess-file-example-proprietary 11/15/2018 03:40 AM multiprocess-zk-example 11/15/2018 03:40 AM multiprocess-zk-example-proprietary Cleaning locks makes no sense unless you are using the multiprocess-file setup. This is deprecated, by the way, in favor of the Zookeeper setup. As for the buttons, please read: https://manifoldcf.apache.org/release/release-2.11/en_US/end-user-documentation.html#outputs The buttons in question are "Reindex all..." and "Remove all..." Karl On Fri, Nov 30, 2018 at 9:36 AM krishna agrawal wrote: > We have deployed the Manifold using > >- Simplified multi-process model > > We did try clean up of lock Sh but that also did not work. > > I dont have forget all document button in output connector. > > [image: image.png] > > On Thu, Nov 29, 2018 at 6:52 PM Karl Wright wrote: > >> Hi Krishna, >> >> Please give us some background as to how you've deployed ManifoldCF. Are >> you using one of the examples? If so, which one? >> >> The detailed answer to your question is: the job must delete all documents >> it indexed before it can be deleted. That is the typical way jobs work. >> Thus, if you shut down the target of your output connection, you may be >> blocked in deleting your job. >> >> At that point, you can either (a) restart the target of your output >> connection, or (b) go to the "view" page for the output connection and >> click both of the "forget all documents" buttons on it. (b) is not >> recommended unless you really want to start over fresh on your output >> index. >> >> Thanks, >> Karl >> >> >> On Thu, Nov 29, 2018 at 3:21 PM krishna agrawal >> wrote: >> >> > Hi We are facing issue of action button is not available >> > >> > [image: image.png] >> > >> > I have stop the agent process but still i am not able to remove the job >> > it say it >> > >> > there should be some way to forcefully restart and stop the running >> > process ? >> > >> > Job 1542835910915 is busy; you must wait and/or shut it down before >> > deleting it >> > but there is no job running, and i am seeing this message from past 3 >> days. >> > >> > is there any ways to clear this? >> > >> > >> > Any help in this matter will be appreciated. >> > >> > Thanks, >> > Krishna A >> > >> >
Re: Apache Manifold 2.10
We have deployed the Manifold using - Simplified multi-process model We did try clean up of lock Sh but that also did not work. I dont have forget all document button in output connector. [image: image.png] On Thu, Nov 29, 2018 at 6:52 PM Karl Wright wrote: > Hi Krishna, > > Please give us some background as to how you've deployed ManifoldCF. Are > you using one of the examples? If so, which one? > > The detailed answer to your question is: the job must delete all documents > it indexed before it can be deleted. That is the typical way jobs work. > Thus, if you shut down the target of your output connection, you may be > blocked in deleting your job. > > At that point, you can either (a) restart the target of your output > connection, or (b) go to the "view" page for the output connection and > click both of the "forget all documents" buttons on it. (b) is not > recommended unless you really want to start over fresh on your output > index. > > Thanks, > Karl > > > On Thu, Nov 29, 2018 at 3:21 PM krishna agrawal > wrote: > > > Hi We are facing issue of action button is not available > > > > [image: image.png] > > > > I have stop the agent process but still i am not able to remove the job > > it say it > > > > there should be some way to forcefully restart and stop the running > > process ? > > > > Job 1542835910915 is busy; you must wait and/or shut it down before > > deleting it > > but there is no job running, and i am seeing this message from past 3 > days. > > > > is there any ways to clear this? > > > > > > Any help in this matter will be appreciated. > > > > Thanks, > > Krishna A > > >
Re: Apache Manifold 2.10
Hi Krishna, Please give us some background as to how you've deployed ManifoldCF. Are you using one of the examples? If so, which one? The detailed answer to your question is: the job must delete all documents it indexed before it can be deleted. That is the typical way jobs work. Thus, if you shut down the target of your output connection, you may be blocked in deleting your job. At that point, you can either (a) restart the target of your output connection, or (b) go to the "view" page for the output connection and click both of the "forget all documents" buttons on it. (b) is not recommended unless you really want to start over fresh on your output index. Thanks, Karl On Thu, Nov 29, 2018 at 3:21 PM krishna agrawal wrote: > Hi We are facing issue of action button is not available > > [image: image.png] > > I have stop the agent process but still i am not able to remove the job > it say it > > there should be some way to forcefully restart and stop the running > process ? > > Job 1542835910915 is busy; you must wait and/or shut it down before > deleting it > but there is no job running, and i am seeing this message from past 3 days. > > is there any ways to clear this? > > > Any help in this matter will be appreciated. > > Thanks, > Krishna A >