Re: Dont understand Compiler message
Ohh you are good! There is an error Message: /home/legine/workspace/ApacheOpenOffice/git/main/basebmp/inc/basebmp/packedpixeliterator.hxx: In member function 'basebmp::PackedPixelIterator::value_type basebmp::PackedPixelIterator ::get(const difference_type&) const': /home/legine/workspace/ApacheOpenOffice/git/main/basebmp/inc/basebmp/packedpixeliterator.hxx:611:35: error: expression cannot be used as a function const int remainder( x(d.x) % num_intraword_positions ); ^ I do not use any -Ps. Sorry missed that one. On 13.11.2017 06:12, Damjan Jovanovic wrote: It's some kind of error in gbuild. It really shouldn't happen. Can you try get the full output of "build --from basebmp" without any -P's? Damjan On Mon, Nov 13, 2017 at 12:39 AM, Peter Kovacs wrote: I tried now build --from basebmp The error stays persistant independantly if i use a prepare step or not. if i go for build --all:basebmp it compiles other libes and gets stuck for similar reasons in other packages. (up to a point whhere nothing works. with no error messages) I can continue with build --all so it starts over with the result that I get stuck in the same module from the beginning. So thats all quite suboptimal. I am not even sure anymore if my uild is sane anymore. Can I force the build process into a sequence build? Maybe that helps. would that be -p1? Thanks for any ideas. all the best Peter On 12.11.2017 15:03, Patricia Shanahan wrote: I sometimes get similar messages that go away if I just rerun the build. I think there may be some problem in whatever is supposed to ensure dependencies are built before the things that depend on them. On 11/12/2017 4:24 AM, Peter Kovacs wrote: | | |My Compile setup:| || ./configure --enable-category-b --enable-bundled-dictionaries --enable-verbose --enable-opengl --enable-dbus --enable-gstreamer --with-dmake-url=http://sourceforge.net/projects/oooextras. mirror/files/dmake-4.12.tar.bz2 --with-epm-url=http://www.mswe et.org/files/project2/epm-3.7-source.tar.gz --without-stlport Checkout is on latest revision. I checked this morning. The Compiler says: |make: *** No rule to make target '/home/legine/workspace/Apache OpenOffice/git/main/solver/420/unxlngx6.pro/workdir/ CxxObject/basebmp/source/bitmapdevice.o', needed by '/home/legine/workspace/ApacheOpenOffice/git/main/solver/420/ unxlngx6.pro/workdir/LinkTarget/Library/libbasebmp.so'. Stop.| |Any Ideas Anyone? | - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: Dont understand Compiler message
It's some kind of error in gbuild. It really shouldn't happen. Can you try get the full output of "build --from basebmp" without any -P's? Damjan On Mon, Nov 13, 2017 at 12:39 AM, Peter Kovacswrote: > I tried now > > build --from basebmp > > The error stays persistant independantly if i use a prepare step or not. > > if i go for > > build --all:basebmp it compiles other libes and gets stuck for similar > reasons in other packages. (up to a point whhere nothing works. with no > error messages) > > I can continue with build --all so it starts over with the result that I > get stuck in the same module from the beginning. > > > So thats all quite suboptimal. I am not even sure anymore if my uild is > sane anymore. > > Can I force the build process into a sequence build? Maybe that helps. > would that be -p1? > > > Thanks for any ideas. > > all the best > > Peter > > > > On 12.11.2017 15:03, Patricia Shanahan wrote: > >> I sometimes get similar messages that go away if I just rerun the build. >> >> I think there may be some problem in whatever is supposed to ensure >> dependencies are built before the things that depend on them. >> >> On 11/12/2017 4:24 AM, Peter Kovacs wrote: >> >>> | >>> | >>> >>> |My Compile setup:| >>> >>> || ./configure --enable-category-b --enable-bundled-dictionaries >>> --enable-verbose --enable-opengl --enable-dbus --enable-gstreamer >>> --with-dmake-url=http://sourceforge.net/projects/oooextras. >>> mirror/files/dmake-4.12.tar.bz2 --with-epm-url=http://www.mswe >>> et.org/files/project2/epm-3.7-source.tar.gz --without-stlport >>> >>> >>> Checkout is on latest revision. I checked this morning. >>> >>> The Compiler says: >>> >>> |make: *** No rule to make target '/home/legine/workspace/Apache >>> OpenOffice/git/main/solver/420/unxlngx6.pro/workdir/ >>> CxxObject/basebmp/source/bitmapdevice.o', needed by >>> '/home/legine/workspace/ApacheOpenOffice/git/main/solver/420/ >>> unxlngx6.pro/workdir/LinkTarget/Library/libbasebmp.so'. Stop.| >>> >>> |Any Ideas Anyone? >>> | >>> >>> >>> >>> >>> >> - >> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org >> For additional commands, e-mail: dev-h...@openoffice.apache.org >> >> > > - > To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org > For additional commands, e-mail: dev-h...@openoffice.apache.org > >
Re: Dont understand Compiler message
I have never had to do more than 2 or 3 instances of build --all before it succeeds. On 11/12/2017 2:39 PM, Peter Kovacs wrote: I tried now build --from basebmp The error stays persistant independantly if i use a prepare step or not. if i go for build --all:basebmp it compiles other libes and gets stuck for similar reasons in other packages. (up to a point whhere nothing works. with no error messages) I can continue with build --all so it starts over with the result that I get stuck in the same module from the beginning. So thats all quite suboptimal. I am not even sure anymore if my uild is sane anymore. Can I force the build process into a sequence build? Maybe that helps. would that be -p1? Thanks for any ideas. all the best Peter On 12.11.2017 15:03, Patricia Shanahan wrote: I sometimes get similar messages that go away if I just rerun the build. I think there may be some problem in whatever is supposed to ensure dependencies are built before the things that depend on them. On 11/12/2017 4:24 AM, Peter Kovacs wrote: | | |My Compile setup:| || ./configure --enable-category-b --enable-bundled-dictionaries --enable-verbose --enable-opengl --enable-dbus --enable-gstreamer --with-dmake-url=http://sourceforge.net/projects/oooextras.mirror/files/dmake-4.12.tar.bz2 --with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz --without-stlport Checkout is on latest revision. I checked this morning. The Compiler says: |make: *** No rule to make target '/home/legine/workspace/ApacheOpenOffice/git/main/solver/420/unxlngx6.pro/workdir/CxxObject/basebmp/source/bitmapdevice.o', needed by '/home/legine/workspace/ApacheOpenOffice/git/main/solver/420/unxlngx6.pro/workdir/LinkTarget/Library/libbasebmp.so'. Stop.| |Any Ideas Anyone? | - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: Dont understand Compiler message
I tried now build --from basebmp The error stays persistant independantly if i use a prepare step or not. if i go for build --all:basebmp it compiles other libes and gets stuck for similar reasons in other packages. (up to a point whhere nothing works. with no error messages) I can continue with build --all so it starts over with the result that I get stuck in the same module from the beginning. So thats all quite suboptimal. I am not even sure anymore if my uild is sane anymore. Can I force the build process into a sequence build? Maybe that helps. would that be -p1? Thanks for any ideas. all the best Peter On 12.11.2017 15:03, Patricia Shanahan wrote: I sometimes get similar messages that go away if I just rerun the build. I think there may be some problem in whatever is supposed to ensure dependencies are built before the things that depend on them. On 11/12/2017 4:24 AM, Peter Kovacs wrote: | | |My Compile setup:| || ./configure --enable-category-b --enable-bundled-dictionaries --enable-verbose --enable-opengl --enable-dbus --enable-gstreamer --with-dmake-url=http://sourceforge.net/projects/oooextras.mirror/files/dmake-4.12.tar.bz2 --with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz --without-stlport Checkout is on latest revision. I checked this morning. The Compiler says: |make: *** No rule to make target '/home/legine/workspace/ApacheOpenOffice/git/main/solver/420/unxlngx6.pro/workdir/CxxObject/basebmp/source/bitmapdevice.o', needed by '/home/legine/workspace/ApacheOpenOffice/git/main/solver/420/unxlngx6.pro/workdir/LinkTarget/Library/libbasebmp.so'. Stop.| |Any Ideas Anyone? | - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: Dont understand Compiler message
I sometimes get similar messages that go away if I just rerun the build. I think there may be some problem in whatever is supposed to ensure dependencies are built before the things that depend on them. On 11/12/2017 4:24 AM, Peter Kovacs wrote: | | |My Compile setup:| || ./configure --enable-category-b --enable-bundled-dictionaries --enable-verbose --enable-opengl --enable-dbus --enable-gstreamer --with-dmake-url=http://sourceforge.net/projects/oooextras.mirror/files/dmake-4.12.tar.bz2 --with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz --without-stlport Checkout is on latest revision. I checked this morning. The Compiler says: |make: *** No rule to make target '/home/legine/workspace/ApacheOpenOffice/git/main/solver/420/unxlngx6.pro/workdir/CxxObject/basebmp/source/bitmapdevice.o', needed by '/home/legine/workspace/ApacheOpenOffice/git/main/solver/420/unxlngx6.pro/workdir/LinkTarget/Library/libbasebmp.so'. Stop.| |Any Ideas Anyone? | - To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org For additional commands, e-mail: dev-h...@openoffice.apache.org
Re: Dont understand Compiler message
Hi Peter, Am 12.11.2017 um 13:24 schrieb Peter Kovacs: > | > | > > |My Compile setup:| > > || ./configure --enable-category-b --enable-bundled-dictionaries > --enable-verbose --enable-opengl --enable-dbus --enable-gstreamer > --with-dmake-url=http://sourceforge.net/projects/oooextras.mirror/files/dmake-4.12.tar.bz2 > --with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz > --without-stlport Most likely not related, but epm is not available at that URL anymore, instead use: https://sourceforge.net/projects/oooextras.mirror/files/epm-3.7.tar.gz Regards, Matthias > > > Checkout is on latest revision. I checked this morning. > > The Compiler says: > > |make: *** No rule to make target > '/home/legine/workspace/ApacheOpenOffice/git/main/solver/420/unxlngx6.pro/workdir/CxxObject/basebmp/source/bitmapdevice.o', > needed by > '/home/legine/workspace/ApacheOpenOffice/git/main/solver/420/unxlngx6.pro/workdir/LinkTarget/Library/libbasebmp.so'. > Stop.| > > |Any Ideas Anyone? > | > > > > smime.p7s Description: S/MIME Cryptographic Signature