subject:"Re\: help building on Fedora x86\-64"

Re: help building on Fedora x86-64

2016-06-29 Thread Carl Marcum


Thanks Kay !!

On 06/28/2016 11:23 AM, Kay Schenk wrote:



On 06/27/2016 05:37 PM, Carl Marcum wrote:

On 09/20/2015 02:10 PM, Andrea Pescetti wrote:

On 20/09/2015 Carl Marcum wrote:

I'm attempting my first AOO build and I'm using Fedora 20 x86-64
I think I have all the dependencies installed.


You can verify it at
https://wiki.openoffice.org/wiki/Fedora_Build_Instructions
(Fedora 19 will be OK as a reference).


I used:
./configure
--with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2 



--with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz 





You should try with a richer set if you want something closer to a
release. But let's start with these basic options for the moment.


[cmarcum]

I know this is and old thread of mine and I was able to get a build but
forgot to follow up.

Where should I look for the "official" set of configure flags to match a
release for Linux?

Thanks,
Carl


They should be in /devtools --

http://svn.apache.org/viewvc/openoffice/devtools/build-scripts/4.1.2/

Just look at the scripts for your particular setup.







-
1 module(s):
 tools
need(s) to be rebuilt
Reason(s):
ERROR: error 65280 occurred while making 
/main/tools/prj

--
What would be the next step to finding out what this error is and 
how to

fix it?


The first step is to get more context. This is a standard build error,
which does not tell us anything about what is broken. If your build
command is simply "build --all" then please re-run it and include the
20 lines or so before the lines you sent. If you use parallel build
(like "build --all -P4 -- -P4") then please re-run it as simply "build
--all" to avoid overlapping output from parallel build, and still
include the 20 or so lines before the above.

I have a Fedora 20 system available in the set of systems I use to
build, and I built trunk on it yesterday, so we should be able to make
your build work too.

Regards,
  Andrea.

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org




-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org






-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: help building on Fedora x86-64

2016-06-28 Thread Kay Schenk




On 06/27/2016 05:37 PM, Carl Marcum wrote:

On 09/20/2015 02:10 PM, Andrea Pescetti wrote:

On 20/09/2015 Carl Marcum wrote:

I'm attempting my first AOO build and I'm using Fedora 20 x86-64
I think I have all the dependencies installed.


You can verify it at
https://wiki.openoffice.org/wiki/Fedora_Build_Instructions
(Fedora 19 will be OK as a reference).


I used:
./configure
--with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2

--with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz



You should try with a richer set if you want something closer to a
release. But let's start with these basic options for the moment.


[cmarcum]

I know this is and old thread of mine and I was able to get a build but
forgot to follow up.

Where should I look for the "official" set of configure flags to match a
release for Linux?

Thanks,
Carl


They should be in /devtools --

http://svn.apache.org/viewvc/openoffice/devtools/build-scripts/4.1.2/

Just look at the scripts for your particular setup.







-
1 module(s):
 tools
need(s) to be rebuilt
Reason(s):
ERROR: error 65280 occurred while making /main/tools/prj
--
What would be the next step to finding out what this error is and how to
fix it?


The first step is to get more context. This is a standard build error,
which does not tell us anything about what is broken. If your build
command is simply "build --all" then please re-run it and include the
20 lines or so before the lines you sent. If you use parallel build
(like "build --all -P4 -- -P4") then please re-run it as simply "build
--all" to avoid overlapping output from parallel build, and still
include the 20 or so lines before the above.

I have a Fedora 20 system available in the set of systems I use to
build, and I built trunk on it yesterday, so we should be able to make
your build work too.

Regards,
  Andrea.

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org




-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org



--

MzK

"Time spent with cats is never wasted."
   -- Sigmund Freud

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: help building on Fedora x86-64

2016-06-27 Thread Carl Marcum


On 09/20/2015 02:10 PM, Andrea Pescetti wrote:

On 20/09/2015 Carl Marcum wrote:

I'm attempting my first AOO build and I'm using Fedora 20 x86-64
I think I have all the dependencies installed.


You can verify it at
https://wiki.openoffice.org/wiki/Fedora_Build_Instructions
(Fedora 19 will be OK as a reference).


I used:
./configure
--with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2 

--with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz 



You should try with a richer set if you want something closer to a 
release. But let's start with these basic options for the moment.


[cmarcum]

I know this is and old thread of mine and I was able to get a build but 
forgot to follow up.


Where should I look for the "official" set of configure flags to match a 
release for Linux?


Thanks,
Carl




-
1 module(s):
 tools
need(s) to be rebuilt
Reason(s):
ERROR: error 65280 occurred while making /main/tools/prj
--
What would be the next step to finding out what this error is and how to
fix it?


The first step is to get more context. This is a standard build error, 
which does not tell us anything about what is broken. If your build 
command is simply "build --all" then please re-run it and include the 
20 lines or so before the lines you sent. If you use parallel build 
(like "build --all -P4 -- -P4") then please re-run it as simply "build 
--all" to avoid overlapping output from parallel build, and still 
include the 20 or so lines before the above.


I have a Fedora 20 system available in the set of systems I use to 
build, and I built trunk on it yesterday, so we should be able to make 
your build work too.


Regards,
  Andrea.

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org




-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: help building on Fedora x86-64

2015-09-21 Thread Carl Marcum


On 09/21/2015 12:43 AM, Damjan Jovanovic wrote:

Fixed in the latest SVN. If you did that change I described, please
revert (svn revert main/tools -R) before you "svn update" to prevent a
conflict.

Damjan

On Mon, Sep 21, 2015 at 2:56 AM, Carl Marcum  wrote:

On 09/20/2015 08:42 PM, Damjan Jovanovic wrote:

On Mon, Sep 21, 2015 at 12:52 AM, Carl Marcum  wrote:

On 09/20/2015 01:35 PM, Carl Marcum wrote:

Hi All,

I'm attempting my first AOO build and I'm using Fedora 20 x86-64

I think I have all the dependencies installed.

I used:
./configure

--with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2

--with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz


Going fine until :
-
1 module(s):
  tools
need(s) to be rebuilt

Reason(s):

ERROR: error 65280 occurred while making /main/tools/prj
--

What would be the next step to finding out what this error is and how to
fix it?

Thanks,
Carl


-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org


Okay, I cleaned it and updated to the latest trunk and built again using
"build -all"

I didn't mention earlier I also have jdk 8.

Here is the relevant output:

=
Building module tools
=

Entering /home/carl/dev-svn/aoo-trunk/main/tools/prj

cd .. && make -s -r -j1   && make -s -r deliverlog
[ info  ALL ] LinkTarget Library/libbasegfx.so not defined: Assuming
headers
to be there!
[ info  ALL ] LinkTarget Library/libi18nisolang1gcc3.so not defined:
Assuming headers to be there!
[ info  ALL ] LinkTarget StaticLibrary/libzlib.a not defined: Assuming
headers to be there!
[ build PKG ] tools_inc
[ build DEP ] LNK:Executable/mkunroll
[ build DEP ] LNK:Executable/rscdep
[ build DEP ] LNK:Executable/so_checksum
[ build DEP ] LNK:Executable/sspretty
[ build DEP ] LNK:Library/libtl.so
[ build DEP ] LNK:StaticLibrary/libooopathutils.a
[ info  ALL ] LinkTarget Library/libgtest.so not defined: Assuming
headers
to be there!
[ info  ALL ] LinkTarget Library/libsfx.so not defined: Assuming headers
to
be there!
[ build DEP ] LNK:GoogleTest/tools_fractiontest
[ build CXX ] tools/source/communi/geninfo
...
...
[ build CXX ] tools/source/generic/link
[ build CXX ] tools/source/generic/poly
/home/carl/dev-svn/aoo-trunk/main/tools/source/generic/poly.cxx: In
member
function 'basegfx::B2DPolygon Polygon::getB2DPolygon() const':
/home/carl/dev-svn/aoo-trunk/main/tools/source/generic/poly.cxx:2200:10:
warning: variable 'bControlB' set but not used
[-Wunused-but-set-variable]
   bool bControlB(false);
^
[ build CXX ] tools/source/generic/poly2
[ build CXX ] tools/source/generic/svborder
...
...
[ build CXX ] tools/source/ref/globname
[ build CXX ] tools/source/ref/pstm
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In function
'SvPersistStream& operator>>(SvPersistStream&,
SvPersistBaseMemberList&)':
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:134:13:
warning:
variable 'nObjLen' set but not used [-Wunused-but-set-variable]
sal_uInt32 nObjLen(0), nObjPos(0);
   ^
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In member
function 'sal_uInt32 SvPersistStream::ReadObj(SvPersistBase*&,
sal_Bool)':
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:750:15:
warning:
variable 'nObjLen' set but not used [-Wunused-but-set-variable]
  sal_uInt32 nObjLen(0), nObjPos(0);
 ^
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In function
'SvStream& operator>>(SvStream&, SvPersistStream&)':
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:885:53:
warning:
cast to pointer from integer of different size [-Wint-to-pointer-cast]
  rThis.aPTable.Insert( (sal_uIntPtr)pEle, (void *)nId );
   ^
[ build CXX ] tools/source/ref/ref
[ build CXX ] tools/source/stream/cachestr
...
...
[ build LNK ] Executable/mkunroll
[ build CXX ] tools/bootstrp/rscdep
/home/carl/dev-svn/aoo-trunk/main/tools/bootstrp/rscdep.cxx: In function
'int main(int, char**)':
/home/carl/dev-svn/aoo-trunk/main/tools/bootstrp/rscdep.cxx:107:18:
warning:
variable 'bIsKnownOption' set but not used [-Wunused-but-set-variable]
   bool bIsKnownOption (true);
^
[ build LNK ] Executable/rscdep
[ build CXX ] tools/bootstrp/md5
[ build CXX ] tools/bootstrp/so_checksum
[ build LNK ] Executable/so_checksum
[ build CXX ] tools/bootstrp/sspretty
[ build LNK ] Executable/sspretty
[ build CXX ] tools/source/misc/pathutils
[ build LNK ] StaticLibrary/libooopathutils.a
[ build MOD ] tools
[ build ALL ] top level modules: tools
[ build ALL ] loaded modules: tools
[ build CXX ] tools/test/tests
/usr/bin/cp: missing destination file operand after

Re: help building on Fedora x86-64

2015-09-20 Thread Carl Marcum


On 09/20/2015 01:35 PM, Carl Marcum wrote:

Hi All,

I'm attempting my first AOO build and I'm using Fedora 20 x86-64

I think I have all the dependencies installed.

I used:
./configure 
--with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2 
--with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz



Going fine until :
-
1 module(s):
tools
need(s) to be rebuilt

Reason(s):

ERROR: error 65280 occurred while making /main/tools/prj
--

What would be the next step to finding out what this error is and how 
to fix it?


Thanks,
Carl


-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org



Okay, I cleaned it and updated to the latest trunk and built again using 
"build -all"


I didn't mention earlier I also have jdk 8.

Here is the relevant output:

=
Building module tools
=

Entering /home/carl/dev-svn/aoo-trunk/main/tools/prj

cd .. && make -s -r -j1   && make -s -r deliverlog
[ info  ALL ] LinkTarget Library/libbasegfx.so not defined: Assuming 
headers to be there!
[ info  ALL ] LinkTarget Library/libi18nisolang1gcc3.so not defined: 
Assuming headers to be there!
[ info  ALL ] LinkTarget StaticLibrary/libzlib.a not defined: Assuming 
headers to be there!

[ build PKG ] tools_inc
[ build DEP ] LNK:Executable/mkunroll
[ build DEP ] LNK:Executable/rscdep
[ build DEP ] LNK:Executable/so_checksum
[ build DEP ] LNK:Executable/sspretty
[ build DEP ] LNK:Library/libtl.so
[ build DEP ] LNK:StaticLibrary/libooopathutils.a
[ info  ALL ] LinkTarget Library/libgtest.so not defined: Assuming 
headers to be there!
[ info  ALL ] LinkTarget Library/libsfx.so not defined: Assuming headers 
to be there!

[ build DEP ] LNK:GoogleTest/tools_fractiontest
[ build CXX ] tools/source/communi/geninfo
...
...
[ build CXX ] tools/source/generic/link
[ build CXX ] tools/source/generic/poly
/home/carl/dev-svn/aoo-trunk/main/tools/source/generic/poly.cxx: In 
member function 'basegfx::B2DPolygon Polygon::getB2DPolygon() const':
/home/carl/dev-svn/aoo-trunk/main/tools/source/generic/poly.cxx:2200:10: 
warning: variable 'bControlB' set but not used [-Wunused-but-set-variable]

 bool bControlB(false);
  ^
[ build CXX ] tools/source/generic/poly2
[ build CXX ] tools/source/generic/svborder
...
...
[ build CXX ] tools/source/ref/globname
[ build CXX ] tools/source/ref/pstm
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In function 
'SvPersistStream& operator>>(SvPersistStream&, SvPersistBaseMemberList&)':
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:134:13: 
warning: variable 'nObjLen' set but not used [-Wunused-but-set-variable]

  sal_uInt32 nObjLen(0), nObjPos(0);
 ^
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In member 
function 'sal_uInt32 SvPersistStream::ReadObj(SvPersistBase*&, sal_Bool)':
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:750:15: 
warning: variable 'nObjLen' set but not used [-Wunused-but-set-variable]

sal_uInt32 nObjLen(0), nObjPos(0);
   ^
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In function 
'SvStream& operator>>(SvStream&, SvPersistStream&)':
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:885:53: 
warning: cast to pointer from integer of different size 
[-Wint-to-pointer-cast]

rThis.aPTable.Insert( (sal_uIntPtr)pEle, (void *)nId );
 ^
[ build CXX ] tools/source/ref/ref
[ build CXX ] tools/source/stream/cachestr
...
...
[ build LNK ] Executable/mkunroll
[ build CXX ] tools/bootstrp/rscdep
/home/carl/dev-svn/aoo-trunk/main/tools/bootstrp/rscdep.cxx: In function 
'int main(int, char**)':
/home/carl/dev-svn/aoo-trunk/main/tools/bootstrp/rscdep.cxx:107:18: 
warning: variable 'bIsKnownOption' set but not used 
[-Wunused-but-set-variable]

 bool bIsKnownOption (true);
  ^
[ build LNK ] Executable/rscdep
[ build CXX ] tools/bootstrp/md5
[ build CXX ] tools/bootstrp/so_checksum
[ build LNK ] Executable/so_checksum
[ build CXX ] tools/bootstrp/sspretty
[ build LNK ] Executable/sspretty
[ build CXX ] tools/source/misc/pathutils
[ build LNK ] StaticLibrary/libooopathutils.a
[ build MOD ] tools
[ build ALL ] top level modules: tools
[ build ALL ] loaded modules: tools
[ build CXX ] tools/test/tests
/usr/bin/cp: missing destination file operand after 
'/home/carl/dev-svn/aoo-trunk/main/solver/420/unxlngx6.pro/lib/libsfx.so'

Try '/usr/bin/cp --help' for more information.
make: *** 
[/home/carl/dev-svn/aoo-trunk/main/solver/420/unxlngx6.pro/lib/libsfx.so] Error 
1

dmake:  Error code 2, while making 'all'

1 module(s):
tools
need(s) to be rebuilt

Reason(s):

ERROR: error 65280 occurred while making 
/home/carl/dev-svn/aoo-trunk/main/tools/prj


When you have fixed the errors in

Re: help building on Fedora x86-64

2015-09-20 Thread Damjan Jovanovic

On Mon, Sep 21, 2015 at 12:52 AM, Carl Marcum  wrote:
> On 09/20/2015 01:35 PM, Carl Marcum wrote:
>>
>> Hi All,
>>
>> I'm attempting my first AOO build and I'm using Fedora 20 x86-64
>>
>> I think I have all the dependencies installed.
>>
>> I used:
>> ./configure
>> --with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2
>> --with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz
>>
>>
>> Going fine until :
>> -
>> 1 module(s):
>> tools
>> need(s) to be rebuilt
>>
>> Reason(s):
>>
>> ERROR: error 65280 occurred while making /main/tools/prj
>> --
>>
>> What would be the next step to finding out what this error is and how to
>> fix it?
>>
>> Thanks,
>> Carl
>>
>>
>> -
>> To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
>> For additional commands, e-mail: dev-h...@openoffice.apache.org
>>
>
> Okay, I cleaned it and updated to the latest trunk and built again using
> "build -all"
>
> I didn't mention earlier I also have jdk 8.
>
> Here is the relevant output:
>
> =
> Building module tools
> =
>
> Entering /home/carl/dev-svn/aoo-trunk/main/tools/prj
>
> cd .. && make -s -r -j1   && make -s -r deliverlog
> [ info  ALL ] LinkTarget Library/libbasegfx.so not defined: Assuming headers
> to be there!
> [ info  ALL ] LinkTarget Library/libi18nisolang1gcc3.so not defined:
> Assuming headers to be there!
> [ info  ALL ] LinkTarget StaticLibrary/libzlib.a not defined: Assuming
> headers to be there!
> [ build PKG ] tools_inc
> [ build DEP ] LNK:Executable/mkunroll
> [ build DEP ] LNK:Executable/rscdep
> [ build DEP ] LNK:Executable/so_checksum
> [ build DEP ] LNK:Executable/sspretty
> [ build DEP ] LNK:Library/libtl.so
> [ build DEP ] LNK:StaticLibrary/libooopathutils.a
> [ info  ALL ] LinkTarget Library/libgtest.so not defined: Assuming headers
> to be there!
> [ info  ALL ] LinkTarget Library/libsfx.so not defined: Assuming headers to
> be there!
> [ build DEP ] LNK:GoogleTest/tools_fractiontest
> [ build CXX ] tools/source/communi/geninfo
> ...
> ...
> [ build CXX ] tools/source/generic/link
> [ build CXX ] tools/source/generic/poly
> /home/carl/dev-svn/aoo-trunk/main/tools/source/generic/poly.cxx: In member
> function 'basegfx::B2DPolygon Polygon::getB2DPolygon() const':
> /home/carl/dev-svn/aoo-trunk/main/tools/source/generic/poly.cxx:2200:10:
> warning: variable 'bControlB' set but not used [-Wunused-but-set-variable]
>  bool bControlB(false);
>   ^
> [ build CXX ] tools/source/generic/poly2
> [ build CXX ] tools/source/generic/svborder
> ...
> ...
> [ build CXX ] tools/source/ref/globname
> [ build CXX ] tools/source/ref/pstm
> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In function
> 'SvPersistStream& operator>>(SvPersistStream&, SvPersistBaseMemberList&)':
> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:134:13: warning:
> variable 'nObjLen' set but not used [-Wunused-but-set-variable]
>   sal_uInt32 nObjLen(0), nObjPos(0);
>  ^
> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In member
> function 'sal_uInt32 SvPersistStream::ReadObj(SvPersistBase*&, sal_Bool)':
> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:750:15: warning:
> variable 'nObjLen' set but not used [-Wunused-but-set-variable]
> sal_uInt32 nObjLen(0), nObjPos(0);
>^
> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In function
> 'SvStream& operator>>(SvStream&, SvPersistStream&)':
> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:885:53: warning:
> cast to pointer from integer of different size [-Wint-to-pointer-cast]
> rThis.aPTable.Insert( (sal_uIntPtr)pEle, (void *)nId );
>  ^
> [ build CXX ] tools/source/ref/ref
> [ build CXX ] tools/source/stream/cachestr
> ...
> ...
> [ build LNK ] Executable/mkunroll
> [ build CXX ] tools/bootstrp/rscdep
> /home/carl/dev-svn/aoo-trunk/main/tools/bootstrp/rscdep.cxx: In function
> 'int main(int, char**)':
> /home/carl/dev-svn/aoo-trunk/main/tools/bootstrp/rscdep.cxx:107:18: warning:
> variable 'bIsKnownOption' set but not used [-Wunused-but-set-variable]
>  bool bIsKnownOption (true);
>   ^
> [ build LNK ] Executable/rscdep
> [ build CXX ] tools/bootstrp/md5
> [ build CXX ] tools/bootstrp/so_checksum
> [ build LNK ] Executable/so_checksum
> [ build CXX ] tools/bootstrp/sspretty
> [ build LNK ] Executable/sspretty
> [ build CXX ] tools/source/misc/pathutils
> [ build LNK ] StaticLibrary/libooopathutils.a
> [ build MOD ] tools
> [ build ALL ] top level modules: tools
> [ build ALL ] loaded modules: tools
> [ build CXX ] tools/test/tests
> /usr/bin/cp: missing destination file operand after
> '/home/carl/dev-svn/aoo-trunk/main/solver/420/unxlngx6.pro/lib/libsfx.so'
> Try '/usr/bin/cp --help' for more information.

Re: help building on Fedora x86-64

2015-09-20 Thread Carl Marcum


On 09/20/2015 08:42 PM, Damjan Jovanovic wrote:

On Mon, Sep 21, 2015 at 12:52 AM, Carl Marcum  wrote:

On 09/20/2015 01:35 PM, Carl Marcum wrote:

Hi All,

I'm attempting my first AOO build and I'm using Fedora 20 x86-64

I think I have all the dependencies installed.

I used:
./configure
--with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2
--with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz


Going fine until :
-
1 module(s):
 tools
need(s) to be rebuilt

Reason(s):

ERROR: error 65280 occurred while making /main/tools/prj
--

What would be the next step to finding out what this error is and how to
fix it?

Thanks,
Carl


-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org


Okay, I cleaned it and updated to the latest trunk and built again using
"build -all"

I didn't mention earlier I also have jdk 8.

Here is the relevant output:

=
Building module tools
=

Entering /home/carl/dev-svn/aoo-trunk/main/tools/prj

cd .. && make -s -r -j1   && make -s -r deliverlog
[ info  ALL ] LinkTarget Library/libbasegfx.so not defined: Assuming headers
to be there!
[ info  ALL ] LinkTarget Library/libi18nisolang1gcc3.so not defined:
Assuming headers to be there!
[ info  ALL ] LinkTarget StaticLibrary/libzlib.a not defined: Assuming
headers to be there!
[ build PKG ] tools_inc
[ build DEP ] LNK:Executable/mkunroll
[ build DEP ] LNK:Executable/rscdep
[ build DEP ] LNK:Executable/so_checksum
[ build DEP ] LNK:Executable/sspretty
[ build DEP ] LNK:Library/libtl.so
[ build DEP ] LNK:StaticLibrary/libooopathutils.a
[ info  ALL ] LinkTarget Library/libgtest.so not defined: Assuming headers
to be there!
[ info  ALL ] LinkTarget Library/libsfx.so not defined: Assuming headers to
be there!
[ build DEP ] LNK:GoogleTest/tools_fractiontest
[ build CXX ] tools/source/communi/geninfo
...
...
[ build CXX ] tools/source/generic/link
[ build CXX ] tools/source/generic/poly
/home/carl/dev-svn/aoo-trunk/main/tools/source/generic/poly.cxx: In member
function 'basegfx::B2DPolygon Polygon::getB2DPolygon() const':
/home/carl/dev-svn/aoo-trunk/main/tools/source/generic/poly.cxx:2200:10:
warning: variable 'bControlB' set but not used [-Wunused-but-set-variable]
  bool bControlB(false);
   ^
[ build CXX ] tools/source/generic/poly2
[ build CXX ] tools/source/generic/svborder
...
...
[ build CXX ] tools/source/ref/globname
[ build CXX ] tools/source/ref/pstm
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In function
'SvPersistStream& operator>>(SvPersistStream&, SvPersistBaseMemberList&)':
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:134:13: warning:
variable 'nObjLen' set but not used [-Wunused-but-set-variable]
   sal_uInt32 nObjLen(0), nObjPos(0);
  ^
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In member
function 'sal_uInt32 SvPersistStream::ReadObj(SvPersistBase*&, sal_Bool)':
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:750:15: warning:
variable 'nObjLen' set but not used [-Wunused-but-set-variable]
 sal_uInt32 nObjLen(0), nObjPos(0);
^
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In function
'SvStream& operator>>(SvStream&, SvPersistStream&)':
/home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:885:53: warning:
cast to pointer from integer of different size [-Wint-to-pointer-cast]
 rThis.aPTable.Insert( (sal_uIntPtr)pEle, (void *)nId );
  ^
[ build CXX ] tools/source/ref/ref
[ build CXX ] tools/source/stream/cachestr
...
...
[ build LNK ] Executable/mkunroll
[ build CXX ] tools/bootstrp/rscdep
/home/carl/dev-svn/aoo-trunk/main/tools/bootstrp/rscdep.cxx: In function
'int main(int, char**)':
/home/carl/dev-svn/aoo-trunk/main/tools/bootstrp/rscdep.cxx:107:18: warning:
variable 'bIsKnownOption' set but not used [-Wunused-but-set-variable]
  bool bIsKnownOption (true);
   ^
[ build LNK ] Executable/rscdep
[ build CXX ] tools/bootstrp/md5
[ build CXX ] tools/bootstrp/so_checksum
[ build LNK ] Executable/so_checksum
[ build CXX ] tools/bootstrp/sspretty
[ build LNK ] Executable/sspretty
[ build CXX ] tools/source/misc/pathutils
[ build LNK ] StaticLibrary/libooopathutils.a
[ build MOD ] tools
[ build ALL ] top level modules: tools
[ build ALL ] loaded modules: tools
[ build CXX ] tools/test/tests
/usr/bin/cp: missing destination file operand after
'/home/carl/dev-svn/aoo-trunk/main/solver/420/unxlngx6.pro/lib/libsfx.so'
Try '/usr/bin/cp --help' for more information.
make: ***
[/home/carl/dev-svn/aoo-trunk/main/solver/420/unxlngx6.pro/lib/libsfx.so]
Error 1
dmake:  Error code 2, while making 'all'

1 module(s):
 tools
need(s) to be rebuilt

Reason(s):

ERROR: error 65280

Re: help building on Fedora x86-64

2015-09-20 Thread Damjan Jovanovic

Fixed in the latest SVN. If you did that change I described, please
revert (svn revert main/tools -R) before you "svn update" to prevent a
conflict.

Damjan

On Mon, Sep 21, 2015 at 2:56 AM, Carl Marcum  wrote:
> On 09/20/2015 08:42 PM, Damjan Jovanovic wrote:
>>
>> On Mon, Sep 21, 2015 at 12:52 AM, Carl Marcum  wrote:
>>>
>>> On 09/20/2015 01:35 PM, Carl Marcum wrote:

 Hi All,

 I'm attempting my first AOO build and I'm using Fedora 20 x86-64

 I think I have all the dependencies installed.

 I used:
 ./configure

 --with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2

 --with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz


 Going fine until :
 -
 1 module(s):
  tools
 need(s) to be rebuilt

 Reason(s):

 ERROR: error 65280 occurred while making /main/tools/prj
 --

 What would be the next step to finding out what this error is and how to
 fix it?

 Thanks,
 Carl


 -
 To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
 For additional commands, e-mail: dev-h...@openoffice.apache.org

>>> Okay, I cleaned it and updated to the latest trunk and built again using
>>> "build -all"
>>>
>>> I didn't mention earlier I also have jdk 8.
>>>
>>> Here is the relevant output:
>>>
>>> =
>>> Building module tools
>>> =
>>>
>>> Entering /home/carl/dev-svn/aoo-trunk/main/tools/prj
>>>
>>> cd .. && make -s -r -j1   && make -s -r deliverlog
>>> [ info  ALL ] LinkTarget Library/libbasegfx.so not defined: Assuming
>>> headers
>>> to be there!
>>> [ info  ALL ] LinkTarget Library/libi18nisolang1gcc3.so not defined:
>>> Assuming headers to be there!
>>> [ info  ALL ] LinkTarget StaticLibrary/libzlib.a not defined: Assuming
>>> headers to be there!
>>> [ build PKG ] tools_inc
>>> [ build DEP ] LNK:Executable/mkunroll
>>> [ build DEP ] LNK:Executable/rscdep
>>> [ build DEP ] LNK:Executable/so_checksum
>>> [ build DEP ] LNK:Executable/sspretty
>>> [ build DEP ] LNK:Library/libtl.so
>>> [ build DEP ] LNK:StaticLibrary/libooopathutils.a
>>> [ info  ALL ] LinkTarget Library/libgtest.so not defined: Assuming
>>> headers
>>> to be there!
>>> [ info  ALL ] LinkTarget Library/libsfx.so not defined: Assuming headers
>>> to
>>> be there!
>>> [ build DEP ] LNK:GoogleTest/tools_fractiontest
>>> [ build CXX ] tools/source/communi/geninfo
>>> ...
>>> ...
>>> [ build CXX ] tools/source/generic/link
>>> [ build CXX ] tools/source/generic/poly
>>> /home/carl/dev-svn/aoo-trunk/main/tools/source/generic/poly.cxx: In
>>> member
>>> function 'basegfx::B2DPolygon Polygon::getB2DPolygon() const':
>>> /home/carl/dev-svn/aoo-trunk/main/tools/source/generic/poly.cxx:2200:10:
>>> warning: variable 'bControlB' set but not used
>>> [-Wunused-but-set-variable]
>>>   bool bControlB(false);
>>>^
>>> [ build CXX ] tools/source/generic/poly2
>>> [ build CXX ] tools/source/generic/svborder
>>> ...
>>> ...
>>> [ build CXX ] tools/source/ref/globname
>>> [ build CXX ] tools/source/ref/pstm
>>> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In function
>>> 'SvPersistStream& operator>>(SvPersistStream&,
>>> SvPersistBaseMemberList&)':
>>> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:134:13:
>>> warning:
>>> variable 'nObjLen' set but not used [-Wunused-but-set-variable]
>>>sal_uInt32 nObjLen(0), nObjPos(0);
>>>   ^
>>> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In member
>>> function 'sal_uInt32 SvPersistStream::ReadObj(SvPersistBase*&,
>>> sal_Bool)':
>>> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:750:15:
>>> warning:
>>> variable 'nObjLen' set but not used [-Wunused-but-set-variable]
>>>  sal_uInt32 nObjLen(0), nObjPos(0);
>>> ^
>>> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx: In function
>>> 'SvStream& operator>>(SvStream&, SvPersistStream&)':
>>> /home/carl/dev-svn/aoo-trunk/main/tools/source/ref/pstm.cxx:885:53:
>>> warning:
>>> cast to pointer from integer of different size [-Wint-to-pointer-cast]
>>>  rThis.aPTable.Insert( (sal_uIntPtr)pEle, (void *)nId );
>>>   ^
>>> [ build CXX ] tools/source/ref/ref
>>> [ build CXX ] tools/source/stream/cachestr
>>> ...
>>> ...
>>> [ build LNK ] Executable/mkunroll
>>> [ build CXX ] tools/bootstrp/rscdep
>>> /home/carl/dev-svn/aoo-trunk/main/tools/bootstrp/rscdep.cxx: In function
>>> 'int main(int, char**)':
>>> /home/carl/dev-svn/aoo-trunk/main/tools/bootstrp/rscdep.cxx:107:18:
>>> warning:
>>> variable 'bIsKnownOption' set but not used [-Wunused-but-set-variable]
>>>   bool bIsKnownOption (true);
>>>^
>>> [ build LNK ] Executable/rscdep
>>> [ build

Re: help building on Fedora x86-64

2015-09-20 Thread Carl Marcum


On 09/20/2015 01:35 PM, Carl Marcum wrote:

Hi All,

I'm attempting my first AOO build and I'm using Fedora 20 x86-64

I think I have all the dependencies installed.

I used:
./configure 
--with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2 
--with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz



Going fine until :
-
1 module(s):
tools
need(s) to be rebuilt

Reason(s):

ERROR: error 65280 occurred while making /main/tools/prj
--

What would be the next step to finding out what this error is and how 
to fix it?


Thanks,
Carl



I should also mention it's from trunk I downloaded 2 days ago.



-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: help building on Fedora x86-64

2015-09-20 Thread Andrea Pescetti


On 20/09/2015 Carl Marcum wrote:

I'm attempting my first AOO build and I'm using Fedora 20 x86-64
I think I have all the dependencies installed.


You can verify it at
https://wiki.openoffice.org/wiki/Fedora_Build_Instructions
(Fedora 19 will be OK as a reference).


I used:
./configure
--with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2
--with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz


You should try with a richer set if you want something closer to a 
release. But let's start with these basic options for the moment.



-
1 module(s):
 tools
need(s) to be rebuilt
Reason(s):
ERROR: error 65280 occurred while making /main/tools/prj
--
What would be the next step to finding out what this error is and how to
fix it?


The first step is to get more context. This is a standard build error, 
which does not tell us anything about what is broken. If your build 
command is simply "build --all" then please re-run it and include the 20 
lines or so before the lines you sent. If you use parallel build (like 
"build --all -P4 -- -P4") then please re-run it as simply "build --all" 
to avoid overlapping output from parallel build, and still include the 
20 or so lines before the above.


I have a Fedora 20 system available in the set of systems I use to 
build, and I built trunk on it yesterday, so we should be able to make 
your build work too.


Regards,
  Andrea.

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: help building on Fedora x86-64

2015-09-20 Thread Damjan Jovanovic

On Sun, Sep 20, 2015 at 7:35 PM, Carl Marcum  wrote:
> Hi All,
>
> I'm attempting my first AOO build and I'm using Fedora 20 x86-64
>
> I think I have all the dependencies installed.
>
> I used:
> ./configure
> --with-dmake-url=http://dmake.apache-extras.org.codespot.com/files/dmake-4.12.tar.bz2
> --with-epm-url=http://www.msweet.org/files/project2/epm-3.7-source.tar.gz
>
>
> Going fine until :
> -
> 1 module(s):
> tools
> need(s) to be rebuilt
>
> Reason(s):
>
> ERROR: error 65280 occurred while making /main/tools/prj
> --
>
> What would be the next step to finding out what this error is and how to fix
> it?
>
> Thanks,
> Carl

Hi Carl

That doesn't tell us much, please post earlier output if you did a
build without "-P2", or "cd main/tools" and just run "build" without
the "-P2" options and attach the output of that.

Thank you
Damjan

-
To unsubscribe, e-mail: dev-unsubscr...@openoffice.apache.org
For additional commands, e-mail: dev-h...@openoffice.apache.org

Re: help building on Fedora x86-64

Re: help building on Fedora x86-64

Re: help building on Fedora x86-64

Re: help building on Fedora x86-64

Re: help building on Fedora x86-64

Re: help building on Fedora x86-64

Re: help building on Fedora x86-64

Re: help building on Fedora x86-64

Re: help building on Fedora x86-64

Re: help building on Fedora x86-64

Re: help building on Fedora x86-64

11 matches

Site Navigation

Mail list logo

Footer information