Re: [Discuss] Datasource v2 support for manipulating partitions
Here’s what can be done in PostgreSQL You can create a partitioned table with a partition clause, e.g. CREATE TABLE measurement (.) PARTITION BY RANGE (logdate) You can create a partitioned table by creating tables as partitions of a partitioned table, e.g. CREATE TABLE measurement_y2006m02 PARTITION OF measurement FOR VALUES FROM ('2006-02-01') TO ('2006-03-01') Each “partition” is like a table and can be managed just like a table. And ofcourse you can have nested partitioning. As for partition management, you can attach/detach partitions by converting a regular table into a table partition and a table partition into a regular table using the ALTER TABLE statement ALTER TABLE measurement ATTACH/DETACH PARTITION There are similar options in Oracle. In Oracle, converting a table into a partition and vice-versa is referred to as “partition exchange”. However unlike Postgres, table partitions are not treated as regular tables. As for partition management relevance in Spark API, here are some thoughts: Reading data from a table supporting predicate pushdown W/o explicit partition specification, we would need to rely on partition pruning to select the appropriate partitions However if we can provide a mechanism to specify the partition(s), that would be great – and it would need to be translated into appropriate SQL clauses under the covers Writing data to a table supporting partitions I think there is no current way to support the above Postgres/Oracle ways of creating partition tables or doing table exchanges intelligently. So probably options or some appropriate interfaces would be required And the above ALTER TABLE equivalent work can be done as part of the commit (provided an appropriate interface is supported). Here are Dale’s comments earlier from the thread “So if we are not hiding them from the user, we need to allow users to manipulate them. Either by representing them generically in the API, allowing pass-through commands to manipulate them, or by some other means.” I think we need to mull over this and also look beyond RDBMSes – say, S3 for applicability. In essence, I think partitions matter because they allow partition pruning (= less resource intensive) during read and allow partition setup and appropriately targeting during write. From: Ryan Blue Reply-To: "rb...@netflix.com" Date: Wednesday, September 19, 2018 at 4:35 PM To: "Thakrar, Jayesh" Cc: "tigerqu...@outlook.com" , Spark Dev List Subject: Re: [Discuss] Datasource v2 support for manipulating partitions What does partition management look like in those systems and what are the options we would standardize in an API? On Wed, Sep 19, 2018 at 2:16 PM Thakrar, Jayesh mailto:jthak...@conversantmedia.com>> wrote: I think partition management feature would be very useful in RDBMSes that support it – e.g. Oracle, PostgreSQL, and DB2. In some cases add partitions can be explicit and can/may be done outside of data loads. But in some other cases, it may/can need to be done implicitly when supported by the platform. Similar to the static/dynamic partition loading in Hive and Oracle. So in short, I agree that partition management should be an optional interface. From: Ryan Blue mailto:rb...@netflix.com>> Reply-To: "rb...@netflix.com<mailto:rb...@netflix.com>" mailto:rb...@netflix.com>> Date: Wednesday, September 19, 2018 at 2:58 PM To: "Thakrar, Jayesh" mailto:jthak...@conversantmedia.com>> Cc: "tigerqu...@outlook.com<mailto:tigerqu...@outlook.com>" mailto:tigerqu...@outlook.com>>, Spark Dev List mailto:dev@spark.apache.org>> Subject: Re: [Discuss] Datasource v2 support for manipulating partitions I'm open to exploring the idea of adding partition management as a catalog API. The approach we're taking is to have an interface for each concern a catalog might implement, like TableCatalog (proposed in SPARK-24252), but also FunctionCatalog for stored functions and possibly PartitionedTableCatalog for explicitly partitioned tables. That could definitely be used to implement ALTER TABLE ADD/DROP PARTITION for Hive tables, although I'm not sure that we would want to continue exposing partitions for simple tables. I know that this is important for storage systems like Kudu, but I think it is needlessly difficult and annoying for simple tables that are partitioned by a regular transformation like Hive tables. That's why Iceberg hides partitioning outside of table configuration. That also avoids problems where SELECT DISTINCT queries are wrong because a partition exists but has no data. How useful is this outside of Kudu? Is it something that we should provide an API for, or is it specific enough to Kudu that Spark shouldn't include it in the API for all sources? rb On Tue, Sep 18, 2018 at 7:38 AM Thakrar, Jayesh mailt
Re: [Discuss] Datasource v2 support for manipulating partitions
What does partition management look like in those systems and what are the options we would standardize in an API? On Wed, Sep 19, 2018 at 2:16 PM Thakrar, Jayesh < jthak...@conversantmedia.com> wrote: > I think partition management feature would be very useful in RDBMSes that > support it – e.g. Oracle, PostgreSQL, and DB2. > > In some cases add partitions can be explicit and can/may be done outside > of data loads. > > But in some other cases, it may/can need to be done implicitly when > supported by the platform. > > Similar to the static/dynamic partition loading in Hive and Oracle. > > > > So in short, I agree that partition management should be an optional > interface. > > > > *From: *Ryan Blue > *Reply-To: *"rb...@netflix.com" > *Date: *Wednesday, September 19, 2018 at 2:58 PM > *To: *"Thakrar, Jayesh" > *Cc: *"tigerqu...@outlook.com" , Spark Dev List < > dev@spark.apache.org> > *Subject: *Re: [Discuss] Datasource v2 support for manipulating partitions > > > > I'm open to exploring the idea of adding partition management as a catalog > API. The approach we're taking is to have an interface for each concern a > catalog might implement, like TableCatalog (proposed in SPARK-24252), but > also FunctionCatalog for stored functions and possibly > PartitionedTableCatalog for explicitly partitioned tables. > > > > That could definitely be used to implement ALTER TABLE ADD/DROP PARTITION > for Hive tables, although I'm not sure that we would want to continue > exposing partitions for simple tables. I know that this is important for > storage systems like Kudu, but I think it is needlessly difficult and > annoying for simple tables that are partitioned by a regular transformation > like Hive tables. That's why Iceberg hides partitioning outside of table > configuration. That also avoids problems where SELECT DISTINCT queries are > wrong because a partition exists but has no data. > > > > How useful is this outside of Kudu? Is it something that we should provide > an API for, or is it specific enough to Kudu that Spark shouldn't include > it in the API for all sources? > > > > rb > > > > > > On Tue, Sep 18, 2018 at 7:38 AM Thakrar, Jayesh < > jthak...@conversantmedia.com> wrote: > > Totally agree with you Dale, that there are situations for efficiency, > performance and better control/visibility/manageability that we need to > expose partition management. > > So as described, I suggested two things - the ability to do it in the > current V2 API form via options and appropriate implementation in > datasource reader/writer. > > And for long term, suggested that partition management can be made part of > metadata/catalog management - SPARK-24252 (DataSourceV2: Add catalog > support)? > > > On 9/17/18, 8:26 PM, "tigerquoll" wrote: > > Hi Jayesh, > I get where you are coming from - partitions are just an implementation > optimisation that we really shouldn’t be bothering the end user with. > Unfortunately that view is like saying RPC is like a procedure call, > and > details of the network transport should be hidden from the end user. > CORBA > tried this approach for RPC and failed for the same reason that no > major > vendor of DBMS systems that support partitions try to hide them from > the end > user. They have a substantial real world effect that is impossible to > hide > from the user (in particular when writing/modifying the data source). > Any > attempt to “take care” of partitions automatically invariably guesses > wrong > and ends up frustrating the end user (as “substantial real world > effect” > turns to “show stopping performance penalty” if the user attempts to > fight > against a partitioning scheme she has no idea exists) > > So if we are not hiding them from the user, we need to allow users to > manipulate them. Either by representing them generically in the API, > allowing pass-through commands to manipulate them, or by some other > means. > > Regards, > Dale. > > > > > -- > Sent from: http://apache-spark-developers-list.1001551.n3.nabble.com/ > > > > > > -- > > Ryan Blue > > Software Engineer > > Netflix > -- Ryan Blue Software Engineer Netflix
Re: [Discuss] Datasource v2 support for manipulating partitions
I think partition management feature would be very useful in RDBMSes that support it – e.g. Oracle, PostgreSQL, and DB2. In some cases add partitions can be explicit and can/may be done outside of data loads. But in some other cases, it may/can need to be done implicitly when supported by the platform. Similar to the static/dynamic partition loading in Hive and Oracle. So in short, I agree that partition management should be an optional interface. From: Ryan Blue Reply-To: "rb...@netflix.com" Date: Wednesday, September 19, 2018 at 2:58 PM To: "Thakrar, Jayesh" Cc: "tigerqu...@outlook.com" , Spark Dev List Subject: Re: [Discuss] Datasource v2 support for manipulating partitions I'm open to exploring the idea of adding partition management as a catalog API. The approach we're taking is to have an interface for each concern a catalog might implement, like TableCatalog (proposed in SPARK-24252), but also FunctionCatalog for stored functions and possibly PartitionedTableCatalog for explicitly partitioned tables. That could definitely be used to implement ALTER TABLE ADD/DROP PARTITION for Hive tables, although I'm not sure that we would want to continue exposing partitions for simple tables. I know that this is important for storage systems like Kudu, but I think it is needlessly difficult and annoying for simple tables that are partitioned by a regular transformation like Hive tables. That's why Iceberg hides partitioning outside of table configuration. That also avoids problems where SELECT DISTINCT queries are wrong because a partition exists but has no data. How useful is this outside of Kudu? Is it something that we should provide an API for, or is it specific enough to Kudu that Spark shouldn't include it in the API for all sources? rb On Tue, Sep 18, 2018 at 7:38 AM Thakrar, Jayesh mailto:jthak...@conversantmedia.com>> wrote: Totally agree with you Dale, that there are situations for efficiency, performance and better control/visibility/manageability that we need to expose partition management. So as described, I suggested two things - the ability to do it in the current V2 API form via options and appropriate implementation in datasource reader/writer. And for long term, suggested that partition management can be made part of metadata/catalog management - SPARK-24252 (DataSourceV2: Add catalog support)? On 9/17/18, 8:26 PM, "tigerquoll" mailto:tigerqu...@outlook.com>> wrote: Hi Jayesh, I get where you are coming from - partitions are just an implementation optimisation that we really shouldn’t be bothering the end user with. Unfortunately that view is like saying RPC is like a procedure call, and details of the network transport should be hidden from the end user. CORBA tried this approach for RPC and failed for the same reason that no major vendor of DBMS systems that support partitions try to hide them from the end user. They have a substantial real world effect that is impossible to hide from the user (in particular when writing/modifying the data source). Any attempt to “take care” of partitions automatically invariably guesses wrong and ends up frustrating the end user (as “substantial real world effect” turns to “show stopping performance penalty” if the user attempts to fight against a partitioning scheme she has no idea exists) So if we are not hiding them from the user, we need to allow users to manipulate them. Either by representing them generically in the API, allowing pass-through commands to manipulate them, or by some other means. Regards, Dale. -- Sent from: http://apache-spark-developers-list.1001551.n3.nabble.com/ -- Ryan Blue Software Engineer Netflix
Re: [Discuss] Datasource v2 support for manipulating partitions
I'm open to exploring the idea of adding partition management as a catalog API. The approach we're taking is to have an interface for each concern a catalog might implement, like TableCatalog (proposed in SPARK-24252), but also FunctionCatalog for stored functions and possibly PartitionedTableCatalog for explicitly partitioned tables. That could definitely be used to implement ALTER TABLE ADD/DROP PARTITION for Hive tables, although I'm not sure that we would want to continue exposing partitions for simple tables. I know that this is important for storage systems like Kudu, but I think it is needlessly difficult and annoying for simple tables that are partitioned by a regular transformation like Hive tables. That's why Iceberg hides partitioning outside of table configuration. That also avoids problems where SELECT DISTINCT queries are wrong because a partition exists but has no data. How useful is this outside of Kudu? Is it something that we should provide an API for, or is it specific enough to Kudu that Spark shouldn't include it in the API for all sources? rb On Tue, Sep 18, 2018 at 7:38 AM Thakrar, Jayesh < jthak...@conversantmedia.com> wrote: > Totally agree with you Dale, that there are situations for efficiency, > performance and better control/visibility/manageability that we need to > expose partition management. > > So as described, I suggested two things - the ability to do it in the > current V2 API form via options and appropriate implementation in > datasource reader/writer. > > And for long term, suggested that partition management can be made part of > metadata/catalog management - SPARK-24252 (DataSourceV2: Add catalog > support)? > > > On 9/17/18, 8:26 PM, "tigerquoll" wrote: > > Hi Jayesh, > I get where you are coming from - partitions are just an implementation > optimisation that we really shouldn’t be bothering the end user with. > Unfortunately that view is like saying RPC is like a procedure call, > and > details of the network transport should be hidden from the end user. > CORBA > tried this approach for RPC and failed for the same reason that no > major > vendor of DBMS systems that support partitions try to hide them from > the end > user. They have a substantial real world effect that is impossible to > hide > from the user (in particular when writing/modifying the data source). > Any > attempt to “take care” of partitions automatically invariably guesses > wrong > and ends up frustrating the end user (as “substantial real world > effect” > turns to “show stopping performance penalty” if the user attempts to > fight > against a partitioning scheme she has no idea exists) > > So if we are not hiding them from the user, we need to allow users to > manipulate them. Either by representing them generically in the API, > allowing pass-through commands to manipulate them, or by some other > means. > > Regards, > Dale. > > > > > -- > Sent from: http://apache-spark-developers-list.1001551.n3.nabble.com/ > > > > -- Ryan Blue Software Engineer Netflix
Re: [Discuss] Datasource v2 support for manipulating partitions
Totally agree with you Dale, that there are situations for efficiency, performance and better control/visibility/manageability that we need to expose partition management. So as described, I suggested two things - the ability to do it in the current V2 API form via options and appropriate implementation in datasource reader/writer. And for long term, suggested that partition management can be made part of metadata/catalog management - SPARK-24252 (DataSourceV2: Add catalog support)? On 9/17/18, 8:26 PM, "tigerquoll" wrote: Hi Jayesh, I get where you are coming from - partitions are just an implementation optimisation that we really shouldn’t be bothering the end user with. Unfortunately that view is like saying RPC is like a procedure call, and details of the network transport should be hidden from the end user. CORBA tried this approach for RPC and failed for the same reason that no major vendor of DBMS systems that support partitions try to hide them from the end user. They have a substantial real world effect that is impossible to hide from the user (in particular when writing/modifying the data source). Any attempt to “take care” of partitions automatically invariably guesses wrong and ends up frustrating the end user (as “substantial real world effect” turns to “show stopping performance penalty” if the user attempts to fight against a partitioning scheme she has no idea exists) So if we are not hiding them from the user, we need to allow users to manipulate them. Either by representing them generically in the API, allowing pass-through commands to manipulate them, or by some other means. Regards, Dale. -- Sent from: http://apache-spark-developers-list.1001551.n3.nabble.com/
Re: [Discuss] Datasource v2 support for manipulating partitions
Hi Jayesh, I get where you are coming from - partitions are just an implementation optimisation that we really shouldn’t be bothering the end user with. Unfortunately that view is like saying RPC is like a procedure call, and details of the network transport should be hidden from the end user. CORBA tried this approach for RPC and failed for the same reason that no major vendor of DBMS systems that support partitions try to hide them from the end user. They have a substantial real world effect that is impossible to hide from the user (in particular when writing/modifying the data source). Any attempt to “take care” of partitions automatically invariably guesses wrong and ends up frustrating the end user (as “substantial real world effect” turns to “show stopping performance penalty” if the user attempts to fight against a partitioning scheme she has no idea exists) So if we are not hiding them from the user, we need to allow users to manipulate them. Either by representing them generically in the API, allowing pass-through commands to manipulate them, or by some other means. Regards, Dale. -- Sent from: http://apache-spark-developers-list.1001551.n3.nabble.com/ - To unsubscribe e-mail: dev-unsubscr...@spark.apache.org
Re: [Discuss] Datasource v2 support for manipulating partitions
I am not involved with the design or development of the V2 API - so these could be naïve comments/thoughts. Just as dataset is to abstract away from RDD, which otherwise required a little more intimate knowledge about Spark internals, I am guessing the absence of partition operations is either due to no current need for it or the need to abstract that away from the API user/programmer. Ofcourse, the other thing about dataset is that it comes with schema - closely binding the two together. However for situations where a deeper understanding of the datasource is necessary to read/write data, then that logic can potentially be embedded into the classes that implement DataSourceReader/DataSourceWriter or DataReader/DataWriter. E.g. if you are writing data and you need to dynamically create partitions on the fly as you write data, then the DataSourceReader can gather the current list of partitions and pass it on to DataWriter via DataWriterFactory. The DataWriter can consult that list and if a row is encountered that does not exist then create it (again note that the partition creation operation needs to be idempotent OR the DataWriter needs to check for the partition before trying to create as it may have been already created by another DataWriter). As for partition add/list/drop/alter, I don't think that concept/notion applies to all datasources (e.g. filesystem). Also, the concept of a Spark partition may not translate into the underlying datasource partition. At the same time I did see a discussion thread on catalog operations for V2 API - although, probably Spark partitions do not map one-to-one to the underlying partitions. Probably a good place to introduce partition info is to add a method/object called "meta" to a dataset and allow the datasource to describe itself (e.g. table permissions, table partitions and specs, datasource info (e.g. cluster), etc.). E.g. something like this With just meta method dataset.meta = {optional datasource specific info} Or with meta as an intermediate object with several operations dataset.meta.describe dataset.meta.update However, if you are look On 9/16/18, 1:24 AM, "tigerquoll" wrote: I've been following the development of the new data source abstraction with keen interest. One of the issues that has occurred to me as I sat down and planned how I would implement a data source is how I would support manipulating partitions. My reading of the current prototype is that Data source v2 APIs expose enough of a concept of a partition to support communicating record distribution particulars to catalyst, but does not represent partitions as a concept that the end user of the data sources can manipulate. The end users of data sources need to be able to add/drop/modify and list partitions. For example, many systems require partitions to be created before records are added to them. For batch use-cases, it may be possible for users to manipulate partitions from within the environment that the data source interfaces to, but for streaming use-cases, this is not at all practical. Two ways I can think of doing this are: 1. Allow "pass-through" commands to the underlying data source 2. Have a generic concept of partitions exposed to the end user via the data source API and Spark SQL DML. I'm keen for option 2 but recognise that its possible there are better alternatives out there. -- Sent from: http://apache-spark-developers-list.1001551.n3.nabble.com/
[Discuss] Datasource v2 support for manipulating partitions
I've been following the development of the new data source abstraction with keen interest. One of the issues that has occurred to me as I sat down and planned how I would implement a data source is how I would support manipulating partitions. My reading of the current prototype is that Data source v2 APIs expose enough of a concept of a partition to support communicating record distribution particulars to catalyst, but does not represent partitions as a concept that the end user of the data sources can manipulate. The end users of data sources need to be able to add/drop/modify and list partitions. For example, many systems require partitions to be created before records are added to them. For batch use-cases, it may be possible for users to manipulate partitions from within the environment that the data source interfaces to, but for streaming use-cases, this is not at all practical. Two ways I can think of doing this are: 1. Allow "pass-through" commands to the underlying data source 2. Have a generic concept of partitions exposed to the end user via the data source API and Spark SQL DML. I'm keen for option 2 but recognise that its possible there are better alternatives out there. -- Sent from: http://apache-spark-developers-list.1001551.n3.nabble.com/ - To unsubscribe e-mail: dev-unsubscr...@spark.apache.org