Re: [VOTE] Release UIMA-DUCC 1.0.0 RC10
- downloaded RC10 binary tarball to standalone 8GB thinkpad running RHEL 6.4 - followed directions from INSTALL file for single-user install and verification - followed directions for multi-user install with webserver login and verified with 1.job submitted from non-ducc user. Found webserver problem displaying Files in the job details page. More on this below (*). - followed directions from duccbook.html, chapter 9 to install opennlp and run text processing sample - ran CAS input processing sample from chapter 10 - setup java_viaducc as per chapter 3.13 and ran hello world type program. Process ran fine, but webserver again could not display Files or Specification from reservation details page. See (**). (*) Directory permissions for non-ducc user are configured to not allow read access by user ducc. In this situation the webserver will not be able to display job details from user log files, unless authenticated to the webserver as the user with read permission. After logging into the webserver, all job details were accessible except for Files tab. (**) Similar problem as with Job details. Log file OK, but nothing shown in Files or Specification tabs. All these details are available to users as human readable files in their filesystem. Another workaround available, if it is OK for cluster users to see each others logfiles, is simply to give user ducc read access to the user log directories and files there. Therefor I do not consider this a blocker for first release. +1 OK to release Eddie
Re: [VOTE] Release UIMA-DUCC 1.0.0 RC10
Downloaded artifacts, did spot checking on signatures - OK Compared binary download to rc9 - only found time stamp diffs, and the 1 change in the ducc.properties file for ducc.agent.launcher.cgroups.enable. READMEs, LICENSE/NOTICE compared the same. Compare of sources for rc9 / rc10 show only the ducc.properties change, too. built from source - OK Based on this and the previous RC9 checking, [X] +1 OK to release -Marshall Schor
Re: [VOTE] Release UIMA-DUCC 1.0.0 RC10
Downloaded and unzipped source tarball - OK Built from source - OK Ran 1.job - OK Based on RC9 testing and the above: [X] +1 OK to release On Mon, Jan 27, 2014 at 11:45 AM, Marshall Schor m...@schor.com wrote: Downloaded artifacts, did spot checking on signatures - OK Compared binary download to rc9 - only found time stamp diffs, and the 1 change in the ducc.properties file for ducc.agent.launcher.cgroups.enable. READMEs, LICENSE/NOTICE compared the same. Compare of sources for rc9 / rc10 show only the ducc.properties change, too. built from source - OK Based on this and the previous RC9 checking, [X] +1 OK to release -Marshall Schor
Re: [VOTE] Release UIMA-DUCC 1.0.0 RC10
Download and unzipped binary tarball Installed on uima-ducc-vm.apache.org following instructions for Install WebServer Demo on wiki @ https://cwiki.apache.org/confluence/display/UIMA/DUCC#DUCC-t2 Ran 1.job Also, followed notes to run with simulated agents Ran 1.job Registered and started a service All OK. [X] +1 OK to release See it live @ http://uima-ducc-vm.apache.org:42133 Lou. On Mon, Jan 27, 2014 at 3:07 PM, Jaroslaw Cwiklik uim...@gmail.com wrote: Downloaded and unzipped source tarball - OK Built from source - OK Ran 1.job - OK Based on RC9 testing and the above: [X] +1 OK to release On Mon, Jan 27, 2014 at 11:45 AM, Marshall Schor m...@schor.com wrote: Downloaded artifacts, did spot checking on signatures - OK Compared binary download to rc9 - only found time stamp diffs, and the 1 change in the ducc.properties file for ducc.agent.launcher.cgroups.enable. READMEs, LICENSE/NOTICE compared the same. Compare of sources for rc9 / rc10 show only the ducc.properties change, too. built from source - OK Based on this and the previous RC9 checking, [X] +1 OK to release -Marshall Schor
Re: [VOTE] Release UIMA-DUCC 1.0.0 RC10
Downloaded binary tarball verified md5sum installed on our small test cluster ran a try3 consisting of 30 jobs APs [X] +1 OK to release On Mon, Jan 27, 2014 at 4:41 PM, Lou DeGenaro lou.degen...@gmail.comwrote: Download and unzipped binary tarball Installed on uima-ducc-vm.apache.org following instructions for Install WebServer Demo on wiki @ https://cwiki.apache.org/confluence/display/UIMA/DUCC#DUCC-t2 Ran 1.job Also, followed notes to run with simulated agents Ran 1.job Registered and started a service All OK. [X] +1 OK to release See it live @ http://uima-ducc-vm.apache.org:42133 Lou. On Mon, Jan 27, 2014 at 3:07 PM, Jaroslaw Cwiklik uim...@gmail.com wrote: Downloaded and unzipped source tarball - OK Built from source - OK Ran 1.job - OK Based on RC9 testing and the above: [X] +1 OK to release On Mon, Jan 27, 2014 at 11:45 AM, Marshall Schor m...@schor.com wrote: Downloaded artifacts, did spot checking on signatures - OK Compared binary download to rc9 - only found time stamp diffs, and the 1 change in the ducc.properties file for ducc.agent.launcher.cgroups.enable. READMEs, LICENSE/NOTICE compared the same. Compare of sources for rc9 / rc10 show only the ducc.properties change, too. built from source - OK Based on this and the previous RC9 checking, [X] +1 OK to release -Marshall Schor
Re: [VOTE] Release UIMA-DUCC 1.0.0 RC10
Did by-the-book installation and ran all system verification test, no problems. +1 Details: - download RC9 and untar - OK - move build to ducc_runtime - OK - run ducc_post_install - OK - run start_ducc everything initializes correctly for first-time start - OK - check webserver - everything is there - OK - cd to ducc_runtime/examples/simple, ducc_submit 1.job - OK - follow 1.job on webserver - runs find - OK - check webserver links - all seem to be - OK - check duccbook from webserver -OK - insure javadoc works from duccbook link on webserver - OK - run stop_ducc - insure everything stops OK including broker - OK - establish multi-node configurarion (8 48G nodes, 1 40G node, 4 32G nodes) (Note to reproduce the rest of this test you configuration a comparable physical configuration) - run check_ducc to verify corret config - OK - rerun 1.job - OK - set up large scale verification cd examples/systemtest and ./prepare mega-15-min/jobs.prepare - OK - run first 'mega': ./runducc -d mega-15-min/job.ctl -i1 -r1 - OK - run second 'mega': ./runducc -d mega-15-min/job.ctl -i1 -r1 --DD - OK - run third 'mega': ./runducc -d mega-15-min/job.ctl -i1 -r1 --SE service.boot OK All services registered OK Services configured to start started OK Everything runs to completion - OK Reference-started services started and stopped properly - OK All services deleted at end OK - ran stop_ducc - all nodes and still-running jobs exited. OK - establish simulation environment and run startsim (52 simulated nodes of various sizes 32G-256G over 6 real 48G nodes) - OK - return large-scale verfification - OK - run first 'mega': ./runducc -d mega-15-min/job.ctl -i1 -r1 - OK - run second 'mega': ./runducc -d mega-15-min/job.ctl -i1 -r1 --DD - OK - run third 'mega': ./runducc -d mega-15-min/job.ctl -i1 -r1 --SE service.boot - OK - stopsim to stop the simulator - OK On 1/24/14 4:52 PM, Jaroslaw Cwiklik wrote: Hi, the tenth release candidate of the sandbox project Apache UIMA DUCC v1.0.0 is ready for voting. Issues fixed in RC10: 1) Changed ducc.properties to disable cgroups by default DUCC stands for Distributed UIMA Cluster Computing. DUCC is a cluster management system providing tooling, management, and scheduling facilities to automate the scale-out of applications written to the UIMA framework. Core UIMA provides a generalized framework for applications that process unstructured information such as human language, but does not provide a scale-out mechanism. UIMA-AS provides a scale-out mechanism to distribute UIMA pipelines over a cluster of computing resources, but does not provide job or cluster management of the resources. DUCC defines a formal job model that closely maps to a standard UIMA pipeline. Around this job model DUCC provides cluster management services to automate the scale-out of UIMA pipelines over computing clusters. The Maven artifacts are here: https://repository.apache.org/content/repositories/orgapacheuima-1005/org/apache/uima/ The source and binary zip/tars are here: http://people.apache.org/~cwiklik/releases/uima-ducc/1.0.0/RC10/ The SVN Tag Checkout: http://svn.apache.org/repos/asf/uima/sandbox/uima-ducc/tags/uima-ducc-1.0.0/ See: http://uima.apache.org/testing-builds.html for instructions how to test release candidate. Please vote on release: [ ] +1 OK to release [ ] 0 Don't care [ ] -1 Not OK to release, because ...
[VOTE] Release UIMA-DUCC 1.0.0 RC10
Hi, the tenth release candidate of the sandbox project Apache UIMA DUCC v1.0.0 is ready for voting. Issues fixed in RC10: 1) Changed ducc.properties to disable cgroups by default DUCC stands for Distributed UIMA Cluster Computing. DUCC is a cluster management system providing tooling, management, and scheduling facilities to automate the scale-out of applications written to the UIMA framework. Core UIMA provides a generalized framework for applications that process unstructured information such as human language, but does not provide a scale-out mechanism. UIMA-AS provides a scale-out mechanism to distribute UIMA pipelines over a cluster of computing resources, but does not provide job or cluster management of the resources. DUCC defines a formal job model that closely maps to a standard UIMA pipeline. Around this job model DUCC provides cluster management services to automate the scale-out of UIMA pipelines over computing clusters. The Maven artifacts are here: https://repository.apache.org/content/repositories/orgapacheuima-1005/org/apache/uima/ The source and binary zip/tars are here: http://people.apache.org/~cwiklik/releases/uima-ducc/1.0.0/RC10/ The SVN Tag Checkout: http://svn.apache.org/repos/asf/uima/sandbox/uima-ducc/tags/uima-ducc-1.0.0/ See: http://uima.apache.org/testing-builds.html for instructions how to test release candidate. Please vote on release: [ ] +1 OK to release [ ] 0 Don't care [ ] -1 Not OK to release, because ...
