content type
what is content type for SI PDU, is it AE or 2E? NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
HOW ABOUT PROVISION MESSAGE
Aarno, Thanks for ur help. I have another question : What is the token for application/vnd.wap.connectivity-wbxml and when I have to turn first bit when I need ture the second bit. for example, we need ture second bit for SI with content 0X05 | 0x40 and we need turn first and second bit for Indication element with content and attibutes 0x06|0x40|0x80 which specification I should refer to? cheers stone -Original Message- From: Aarno Syvänen [mailto:as;gni.ch] Sent: 24 October 2002 11:50 To: Stone Zhang Subject: Re: content type Token for application/vnd.wap.sic 0x2e, but you must turn first bit, to show that the token is a short integer. So SMS should have 0xae. Aarno On Thursday, October 24, 2002, at 01:22 PM, Stone Zhang wrote: what is content type for SI PDU, is it AE or 2E? NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information. NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
OTA message WDP port number ?
can I ask what is the WDP dest and org port number for OTA message I know for Nokia hanset they are C3F4 for destination port and C002 for originating port, is that same for other handsets? cheers Stone NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
gd87
Does anyone work out the format of OTA message for GD87? rgs Stone Zhang NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
sms format for WAP SI push
Dear All, I am stucked with the SMS format of wap SI push via SMS does wdp header is necessary in the SMS and how about wsp header? do I need put X-Wap-Application-ID and Push-Flag in the SMS? where can I find all these specification? anyone can share your successful samples will be greatly appreciated! thanks alot rgs Stone Zhang NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
SMSC question
Can any one of the Kannel experts let me know which GSM modem and SMSC protocol are stable for sending binary message (push notification and etc.) Thanks in advance Stone Zhang Tel +44 (0)20 8214 5045 Fax +44 (0)20 8214 3178 Mobile 07939 750 782 NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
RE: wap push test
Thank you (Stipe and Aarno) very much for helping me. the problem has been sorted out by adding the smsc-at and deleting the http smsc rgs -Original Message- From: Stipe Tolj [mailto:[EMAIL PROTECTED]] Sent: 04 March 2002 12:45 To: Stone Zhang Cc: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]' Subject: Re: wap push test Stone Zhang wrote: I have a problem when I tried wap push with kannel cvs version. I am using a Nokia premicell as a SMSC you're definitly conseptually wrong here, I'll try to explain: the I followed the User' Guide, 1. gw/bearerbox pushkannel.conf gw/wapbox pushkannel.conf 2. test/test_http_server -p 10001 3. test/tes_ppg -q http://localhost:1 then I got a error message -- Authorization failed for sendsms you have defined a smsc_http group for PPG transportation. That is definitly wrong! BTW, I can't see your smsc_at group for the Nokia premicell you are talking about, or are you relaying to a different kannel installation that runs the premicell?! Ok, PPG requests are defined in the ppg group, hence (given your config) you would address http://localhost:8080/cgi-bin/wap-push.cgi and POSTing the document to it. the PPG inside sends it then via the available smsc groups to the device. Keep in mind that your PAP document contains accordingly the bearer type (in your case SMS and no IPv4) to address the client device. Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
wap push using premicell
Hi, I had a problem when I tired to send a WAP push SI via Nokia premicell. I got the following message from bearerbox 2002-03-05 11:45:51 [14] DEBUG: boxc_receiver: got sms from wapbox 2002-03-05 11:45:52 [5] DEBUG: international starting with + (+447939751015) 2002-03-05 11:45:52 [5] DEBUG: TP-Validity-Period: 24.0 hours 2002-03-05 11:45:52 [5] DEBUG: AT2[/dev/ttyS1]: -- AT+CMGS=115^M 2002-03-05 11:45:52 [5] DEBUG: AT2[/dev/ttyS1]: -- 2002-03-05 11:45:52 [5] DEBUG: send command status: 1 2002-03-05 11:45:52 [5] DEBUG: AT2[/dev/ttyS1]: -- 51000C914497935701510008A7650605040B8423F0040617AE966C6F63616C686F73743A3830 383000AF808DC4B48002056A0045C60C033139322E3136382E392E342F6D6964702E776D6C00 110331406F6E65326F6E652E636F6D00080AC30620010225152010C304201012300103570001 01 2002-03-05 11:45:52 [5] DEBUG: AT2[/dev/ttyS1]: -- ^Z 2002-03-05 11:45:52 [5] DEBUG: AT2[/dev/ttyS1]: -- 2002-03-05 11:45:52 [5] DEBUG: AT2[/dev/ttyS1]: -- ERROR 2002-03-05 11:45:52 [5] DEBUG: send command status: -1 and the following message from wapbox is 2002-03-05 11:45:51 [11] DEBUG: HTTP: Creating HTTPClient for `127.0.0.1'. 2002-03-05 11:45:51 [13] INFO: PPG: Accept request /cgi-bin/wap-push.cgi from 127.0.0.1 2002-03-05 11:45:51 [13] DEBUG: PPG: http_read_thread: pap multipart accepted 2002-03-05 11:45:51 [13] INFO: client address was +447939751015, accepted 2002-03-05 11:45:51 [13] DEBUG: PAP COMPILER: doing semantic analysis for address type a phone number 2002-03-05 11:45:51 [13] INFO: using defaults instead of anys 2002-03-05 11:45:51 [13] DEBUG: PPG: http_read_thread: pap control entity compiled ok 2002-03-05 11:45:51 [13] DEBUG: PPG: transform_message: push message content and headers valid 2002-03-05 11:45:51 [13] DEBUG: PPG: push machine 4 created 2002-03-05 11:45:51 [13] DEBUG: PPG: store_push_data: push machine 4 appended to unit push list 2002-03-05 11:45:51 [13] DEBUG: PPG: send_push_response: telling pi 2002-03-05 11:45:51 [13] DEBUG: HTTP: Resetting HTTPClient for `127.0.0.1'. 2002-03-05 11:45:51 [13] INFO: PPG: handle_push_message: push message accepted for processing 2002-03-05 11:45:51 [9] DEBUG: OTA: event arrived 2002-03-05 11:45:51 [9] DEBUG: OTA: made connectionless session service request 2002-03-05 11:45:51 [2] DEBUG: WSP_UNIT: Connectionless push accepted 2002-03-05 11:45:51 [2] DEBUG: WDP (wapbox): Message length was 94, sending 1 messages 2002-03-05 11:45:51 [13] DEBUG: PPG: OTA request for unit push 2002-03-05 11:45:51 [13] INFO: PPG: unconfirmed push delivered to OTA 2002-03-05 11:45:51 [13] DEBUG: PPG: destroying push machine 4 2002-03-05 11:45:51 [10] DEBUG: HTTP: Destroying HTTPClient area 0x821a970. 2002-03-05 11:45:51 [10] DEBUG: HTTP: Destroying HTTPClient for `127.0.0.1'. why i got the error from modem, is it because the content of my SI and Contorl file is not correct or just because the message is too long. And what -1 and 1 stand for in send command status thanks very much rgs Stone NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
help needed in wap push
Hi, Dear All, I am struggling to use a GSM modem to do wap push with Kannel CVS version! There is one line I can not understand about the sample pushkannel.conf from CVS is # SMSC CONNECTIONS, for pushing SI or SL over SMS. You can have many connec- # tions, for instance one for HTTP SMSC and group = smsc smsc = http smsc-id = HTTP port = 1 system-type = kannel smsc-username = foo smsc-password = bar no-sender = true no-coding = true no-sep = true #? for the query will be added by Kannel send-url = http://localhost:8081/util/kannelgw.phtml as I know, this SEND-URL should point to sendsms service, my question is who will be the sendsms service? is the test_http_server application, which is mentioned in Kannel cvs User's Guide, Appendix C. Setting Up a test environment for PPG, or some other applications? and why i could not find kannelgw.phtml in my CVS at all? any help will be greatly appreciated! Sincerely yours Stone NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
wap push test
Hi, There, I have a problem when I tried wap push with kannel cvs version. I am using a Nokia premicell as a SMSC the configuration file -- pushkannel.conf is followed: ## group = core admin-port = 13000 smsbox-port = 13001 wapbox-port = 13002 admin-password = bar #status-password = foo #admin-deny-ip = #admin-allow-ip = wdp-interface-name = * log-file = log/bearerbox.log log-level = 0 #box-deny-ip = *.*.*.* box-allow-ip = *.*.*.* #unified-prefix = +358,00358,0;+,00 #access-log = access.log #store-file = kannel.store #ssl-server-cert-file = cert.pem #ssl-server-key-file = key.pem # WAPBOX SETUP, for pushing and for pulling (fetching) the wap data group = wapbox bearerbox-host =127.0.0.1 log-file = log/wapbox.log log-level = 0 syslog-level = none # PPG CORE SETUP, for defining the push request interface group = ppg ppg-url = /cgi-bin/wap-push.cgi ppg-port = 8080 concurrent-pushes = 100 trusted-pi = false users = 1024 #ppg-deny-ip = 194.100.32.89;194.100.32.103 ppg-allow-ip = 127.0.0.1 #ssl-server-cert-file = /home/aarno/kannelcvs/gateway/gw/cert.pem #ssl-server-key-file = /home/aarno/kannelcvs/gateway/gw/key.pem ppg-port-ssl = no # PPG USER SETUP, for authorizing a specific push user group = wap-push-user wap-push-user = root ppg-username = foo ppg-password = bar #allowed-prefix = 40;60;70 #denied-prefix = 50 #white-list = http://localhost:8082/whitelist #black-list = http://localhost:8082/blacklist allow-ip = 127.0.0.1 #deny-ip = 194.100.32.82 # SMSC CONNECTIONS, for pushing SI or SL over SMS group = smsc smsc = http smsc-id = HTTP port = 1 system-type = kannel smsc-username=foo smsc-password=bar no-sender = true no-coding = true #? for the query will be added by Kannel send-url = http://localhost:10001 # SMSBOX SETUP (a kludge !) group = smsbox bearerbox-host = localhost #sendsms-port = 13013 #global-sender = 13013 #sendsms-chars = 0123456789 +- log-file = /log/smsbox.log log-level = 0 #access-log = access.log the I followed the User' Guide, 1. gw/bearerbox pushkannel.conf gw/wapbox pushkannel.conf 2. test/test_http_server -p 10001 3. test/tes_ppg -q http://localhost:1 then I got a error message -- Authorization failed for sendsms have anyone use wap push with a gsm data phone. can you send me your conf files or help me find out where am i wrong. thanks rgs Stone Zhang Tel +44 (0)20 8214 5045 Fax +44 (0)20 8214 3178 Mobile 07939 750 782 4 Floor IP2 Maxwell Road Borehamwood Herts WD6 1EA UK NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information. NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
wap push
Hi, There, I have a problem when I tried wap push with kannel cvs version. I am using a Nokia premicell as a SMSC I followed the User' Guide, but when i run test/tes_ppg I got a error message -- Authorization failed for sendsms have anyone use wap push with a gsm data phone. can you send me your conf files. thanks rgs Stone Zhang Tel +44 (0)20 8214 5045 Fax +44 (0)20 8214 3178 Mobile 07939 750 782 4 Floor IP2 Maxwell Road Borehamwood Herts WD6 1EA UK NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
SMSC support SL45i and T68
hi, Just wonders does Kannel SMSC support SL45 and T68? I tried to send SMS via Nokia Premicell to SL45 and T68, but both failed. Cheers Stone NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
wap push
Dear All I just jion in the group. I got a couple of questions: first of all, I am wondering how can I make the 1.1.15 support wap push, secondly, how can I join in the project -- WAP 1.2 / June 2000 conformance cheers Stone Zhang Tel +44 (0)20 8214 5045 Fax +44 (0)20 8214 3178 Mobile 07939 750 782 4 Floor IP2 Maxwell Road Borehamwood Herts WD6 1EA UK NOTICE AND DISCLAIMER: This email (including attachments) is confidential. If you have received this email in error please notify the sender immediately and delete this email from your system without copying or disseminating it or placing any reliance upon its contents. We cannot accept liability for any breaches of confidence arising through use of email. Any opinions expressed in this email (including attachments) are those of the author and do not necessarily reflect our opinions. We will not accept responsibility for any commitments made by our employees outside the scope of our business. We do not warrant the accuracy or completeness of such information.
