Re: Joyride and microphone
Robert Myers wrote: > > Is this a software issue or did my mic die? Things were working before I > upgraded to Joyride. Anything I can do to check? You stated that it work in the ofw selftest so your hardware appears good. > If this is a software issue are there libraries or versions I need to > change? Run alsamixer from the command like and take a look at what the various settings are. Make sure the mic is unmuted and that the record levels are set properly and the v_refout is enabled (unmuted) and DC Mode disabled. When using alsamixer make sure you switch to the "capture" settings with the tab key to see the mic record level. In "playback" the "mic" control is not the microphone record control its the analog mixer control which is the level of mic input thats routed back the the speaker output. Muted and zero is the proper setting for that control. -- Richard Smith <[EMAIL PROTECTED]> One Laptop Per Child ___ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel
Joyride and microphone
I recently upgraded to Joyride and am having trouble with the microphone. In the powerup selftest the microphone works, but the level of the playback is much lower than the powerup chime or the sound sweep test. The microphone does not work in Record or Measure. Version particulars: Firmware q2d16 Joyride 2137 Record 55 Measure 17 Is this a software issue or did my mic die? Things were working before I upgraded to Joyride. Anything I can do to check? If this is a software issue are there libraries or versions I need to change? I'd prefer not to have to go back to 708 just to check this issue out. Thanks Bob ___ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel
